Re: [RCSE] JR 9303 Flap Programming Question
You also need to set the flapern mix. Its just above the flap rate. Set the values to +100 and you should see them work. -- Original message -- From: Chris Rose [EMAIL PROTECTED] I just got a 9303 for an incredible price, and have run into a wall trying to convert all my gliders over to it. I've followed this post as a guide from rcgroups: http://www.rcgroups.com/forums/showthread.php?t=347609 My problem is that I try adjusting the flaps in the flap rates and camber mix menus, but I don't see any change in the flaps as I move the various switches for the various flight modes. I'm trying to program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something that I'm missing? I've tried to program this like I would my JR 6102, but this is an entirely different beast. FYI, I'm trying to program three DLGs, and a 3M Trio, as well as a couple of 2Ms. Thanks for the help, Chris Rose RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
RE: [RCSE] JR 9303 Flap Programming Question
OK to set the Trailing edge in flight modes all you do is switch to the FM you want and push the little trimmers on the top face of the 9303 the direction you want the ailerons and flaps to go in that FM. These are the ones on either side of the JR logo. That's all there is to it. Once you switch back to Cruse mode the TE will return. Tom Copp Composite Specialties www.f3x.com 949-645-7032 My problem is that I try adjusting the flaps in the flap rates and camber mix menus, but I don't see any change in the flaps as I move the various switches for the various flight modes. I'm trying to program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something that I'm missing? I've tried to program this like I would my JR 6102, but this is an entirely different beast. RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format
[RCSE] JR 9303 Flap Programming Question
I just got a 9303 for an incredible price, and have run into a wall trying to convert all my gliders over to it. I've followed this post as a guide from rcgroups: http://www.rcgroups.com/forums/showthread.php?t=347609 My problem is that I try adjusting the flaps in the flap rates and camber mix menus, but I don't see any change in the flaps as I move the various switches for the various flight modes. I'm trying to program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something that I'm missing? I've tried to program this like I would my JR 6102, but this is an entirely different beast. FYI, I'm trying to program three DLGs, and a 3M Trio, as well as a couple of 2Ms. Thanks for the help, Chris Rose RCSE-List facilities provided by Model Airplane News. Send subscribe and unsubscribe requests to [EMAIL PROTECTED] Please note that subscribe and unsubscribe messages must be sent in text only format with MIME turned off. Email sent from web based email such as Hotmail and AOL are generally NOT in text format