Re: [RCSE] JR 9303 Flap Programming Question

[david . jensen]

You also need to set the flapern mix.  Its just above the flap rate.  Set the 
values to +100 and you should see them work.
 -- Original message --
From: Chris Rose [EMAIL PROTECTED]
 I just got a 9303 for an incredible price, and have run into a wall
 trying to convert all my gliders over to it. I've followed this post
 as a guide from rcgroups:
 
 
 http://www.rcgroups.com/forums/showthread.php?t=347609
 
 My problem is that I try adjusting the flaps in the flap rates and
 camber mix menus, but I don't see any change in the flaps as I move
 the various switches for the various flight modes. I'm trying to
 program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something
 that I'm missing? I've tried to program this like I would my JR 6102,
 but this is an entirely different beast.
 
 FYI, I'm trying to program three DLGs, and a 3M Trio, as well as a
 couple of 2Ms.
 
 Thanks for the help,
 
 Chris Rose
 RCSE-List facilities provided by Model Airplane News.  Send subscribe and 
 unsubscribe requests to [EMAIL PROTECTED]  Please note that 
 subscribe and unsubscribe messages must be sent in text only format with MIME 
 turned off.  Email sent from web based email such as Hotmail and AOL are 
 generally NOT in text format

RCSE-List facilities provided by Model Airplane News.  Send subscribe and 
unsubscribe requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.  
Email sent from web based email such as Hotmail and AOL are generally NOT in 
text format

RE: [RCSE] JR 9303 Flap Programming Question

[Tom Copp]

OK to set the Trailing edge in flight modes all you do is switch to the FM
you want and push the little trimmers on the top face of the 9303 the
direction you want the ailerons and flaps to go in that FM. These are the
ones on either side of the JR logo. That's all there is to it. Once you
switch back to Cruse mode the TE will return. 

Tom Copp
Composite Specialties
www.f3x.com 
949-645-7032

 
 My problem is that I try adjusting the flaps in the flap rates and
 camber mix menus, but I don't see any change in the flaps as I move
 the various switches for the various flight modes. I'm trying to
 program a Berg 4l, berg 7 channel, and a jr700 rx. Is there something
 that I'm missing? I've tried to program this like I would my JR 6102,
 but this is an entirely different beast.
 



RCSE-List facilities provided by Model Airplane News.  Send subscribe and 
unsubscribe requests to [EMAIL PROTECTED]  Please note that subscribe and 
unsubscribe messages must be sent in text only format with MIME turned off.  
Email sent from web based email such as Hotmail and AOL are generally NOT in 
text format