[speedtouch] pppoa2 error
Does anyone know what could be causing the error in pppoa2.log below? I personally don't even know where to start looking for the cause... modem_run is running fine without any errors. I'm using /usr/local/sbin/pppoa2 -v 1 -e 1 -d /dev/ugen0 -vpi 8 -vci 48 dmesg shows my modem as: ugen0: ALCATEL Speed Touch 330, rev 1.10/2.00, addr 2 If you need more info let me know please. thanks, Juel error msg in /var/log/pppoa2.log Info 21125 Starting PPPoA2 ( merged version includes new ATM/AAL5 stack ) 1.2-beta1 Info 21125 Log started on Mon Feb 10 17:19:27 2003 Info 21125 I'm the parent process, I handle the endpoint 0x07 Debug 21125 pty descriptors : fdin=3, fdout=4 Error 21125 pusb_set_configuration 1 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
[speedtouch] Re: errno: No such process on OpenBSD 3.2
according to the ./configure output pthread.lib isn't yet supported ( I guess this is only true for OpenBSD ) so pppoa3 doesn't get build by make so I can only use pppoa2. Should work though because if I look through the mailing archives I can see that many people are using the speedtouch drivers with OpenBSD 3.2... Juel On Fri, 24 Jan 2003 11:07:36 +0100, Vaessen, E.M.J. (Ed) [EMAIL PROTECTED] wrote: I only know something about how to configure the speedtouch USB (330) modem on (Mandrake) linux. I was surprised to see that you use pppoa2 and not pppoa3. Ed -Oorspronkelijk bericht- Van: Juel da Costa [mailto:[EMAIL PROTECTED]] Verzonden: donderdag 23 januari 2003 18:45 Aan: [EMAIL PROTECTED] Onderwerp: [speedtouch] errno: No such process on OpenBSD 3.2 Hi all, I am hoping anyone can help me with the following problem: Having just installed a clean OpenBSD 3.2 system (on a laptop) I have built and installed speedtouch-1.1.tar.gz and copied mgmt.o the /usr/local/libdata/ . I have copied the sample ppp.conf file to /etc/ppp/ppp.conf and amended it to fit my own requirements and changed /etc/syslog.conf to enable modem_run and pppoa2 to log to /var/log/messages. When I start modem_run it all seems to work fine according to the log entries in /var/log/messages but when I start ppp adsl I'm getting the following error messages : Jan 23 14:56:15 omni ppp[27087]: tun0: Warning: Add route failed: 0.0.0.0/0: errno: No such process and then I'm dropped into ppp interactive mode. When I open another console I can see that tun0 hasn't been configured. I doublechecked that I specified the full path to pppoa2 in ppp.conf and I even tried explicitly specifying -d /dev/ugen0 but that didn't work either. Does anyone have any ideas on how to solve this? Any suggestions would be welcome because I'm getting desperate... Thanks, Juel my ppp.conf default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command adsl: set authname myusername set authkey mypassword set device !/usr/local/sbin/pppoa2 -d /dev/ugen0 -vpi 8 -vci 48 -v 2 accept chap set speed sync set timeout 0 enable lqr set lqrperiod 5 set redial 15 1 set dial set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:speedtouch- [EMAIL PROTECTED]?subject=unsubscribe Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:speedtouch- [EMAIL PROTECTED]?subject=unsubscribe -- Juel da Costa Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
[speedtouch] Re: Alcatel Modem USB Initialization
I have, unless I've missed something that I shouldn't have... The speedtouch-1.1.tar.gz file comes with installation instruction particular to *BSD that (I think) I have followed to the letter. Have you seen any info regarding building pppoa3 on OpenBSD? If so, could you send me the url? Thanks for your comments so far! Juel On Fri, 24 Jan 2003 15:11:08 +0100, Vaessen, E.M.J. (Ed) [EMAIL PROTECTED] wrote: You have seen the instructions on this page? http://benoit.papillault.free.fr/speedtouch/index.en.php3 Ed Vaessen -Oorspronkelijk bericht- Van: Joaquin Hernandez [mailto:[EMAIL PROTECTED]] Verzonden: donderdag 23 januari 2003 20:06 Aan: [EMAIL PROTECTED] Onderwerp: [speedtouch] Alcatel Modem USB Initialization Im trying to find the initialization sequence required by the modem. Is there a set sequence that needs to be followed, for example, first you set the configuration, then download microcode, etc? Currently Im running into a problem where the modem will not load the microcode Im sending to it. Any help is greatly appreciated. Thanks, Jack Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:speedtouch- [EMAIL PROTECTED]?subject=unsubscribe Disclaimer Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:speedtouch- [EMAIL PROTECTED]?subject=unsubscribe -- Juel da Costa Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
[speedtouch] errno: No such process on OpenBSD 3.2
Hi all, I am hoping anyone can help me with the following problem: Having just installed a clean OpenBSD 3.2 system (on a laptop) I have built and installed speedtouch-1.1.tar.gz and copied mgmt.o the /usr/local/libdata/ . I have copied the sample ppp.conf file to /etc/ppp/ppp.conf and amended it to fit my own requirements and changed /etc/syslog.conf to enable modem_run and pppoa2 to log to /var/log/messages. When I start modem_run it all seems to work fine according to the log entries in /var/log/messages but when I start ppp adsl I'm getting the following error messages : Jan 23 14:56:15 omni ppp[27087]: tun0: Warning: Add route failed: 0.0.0.0/0: errno: No such process and then I'm dropped into ppp interactive mode. When I open another console I can see that tun0 hasn't been configured. I doublechecked that I specified the full path to pppoa2 in ppp.conf and I even tried explicitly specifying -d /dev/ugen0 but that didn't work either. Does anyone have any ideas on how to solve this? Any suggestions would be welcome because I'm getting desperate... Thanks, Juel my ppp.conf default: ident user-ppp VERSION (built COMPILATIONDATE) set log Phase Chat IPCP CCP tun command adsl: set authname myusername set authkey mypassword set device !/usr/local/sbin/pppoa2 -d /dev/ugen0 -vpi 8 -vci 48 -v 2 accept chap set speed sync set timeout 0 enable lqr set lqrperiod 5 set redial 15 1 set dial set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
