Re: [freenet-support] Back-Off, or something of which nothing is written
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Jul 21, 2015 9:01 PM, "VolodyA! V Anarhist" wrote: > Spam detection software, running on the system "freenetproject.org", > has identified this incoming email as possible spam. The original > message has been attached to this so you can view it or label > similar future email. If you have any questions, see > the administrator of that system for details. > > Content preview: As i understand the whole process of back-off, just by > observing >what is happening with my node: There are two numbers, the first is how > much >time is left for the node to be backed off. The second is how much time > it >was backed-off for during this incident. When the first counter reaches > 0, >then it checks whether it can do things correctly now. If not, it then > increases >the second number (doubles it?) and then sets the first to that value > and >waits again. If it can communicate, then it decreases the second number > and >things operate normally. [...] > > Content analysis details: (5.2 points, 5.0 required) > > pts rule name description > -- > -- > 2.0 FREENET_FROM_BACKUPMX Received from the backup-MX server > 0.8 BAYES_50 BODY: Bayes spam probability is 40 to 60% > [score: 0.5000] > 0.1 DKIM_SIGNEDMessage has a DKIM or DK signature, not > necessarily valid > 1.0 T_DKIM_INVALID DKIM-Signature header exists but is not valid > 0.5 UNPARSEABLE_RELAY Informational: message has unparseable relay > lines > 0.8 RDNS_NONE Delivered to internal network by a host with > no rDNS > > > > > -- Forwarded message -- > From: "VolodyA! V Anarhist" > To: List - Freenet Support > Cc: > Date: Sat, 18 Jul 2015 09:50:44 +0300 > Subject: Back-Off, or something of which nothing is written > As i understand the whole process of back-off, just by observing what is > happening with my node: > > There are two numbers, the first is how much time is left for the node to > be > backed off. The second is how much time it was backed-off for during this > incident. When the first counter reaches 0, then it checks whether it can > do > things correctly now. If not, it then increases the second number (doubles > it?) and then sets the first to that value and waits again. If it can > communicate, then it decreases the second number and things operate > normally. > > I wasn't able to catch how the decrease of the duration happens. And wasn't > able to find anything in documentation. > > Is there something written about it, and i just missed it? > I am fine with you just pointing me to the Java class where it happens, > i'll > read the code. > > - Volodya > > -- > Помогите собрать средства на написания учебника по программированию: > > https://boomstarter.ru/projects/volodya/elektronnyy_uchebnik_po_gtkmm_okonnye_pr > ilozheniya_v_c > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Do not download files from Freenet and Frost
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Jul 23, 2015 4:25 PM, "xor" wrote: > On Tuesday, July 21, 2015 07:17:08 PM aleksa...@loadby.us wrote: > > Hi, do not open the site and do not download the files in Frost as in > > Freenet download file reaches 100% and then download everything goes, > > himself a downloadable file in the download folder does not appear, at > the > > same time he works news frost chats updated.Tried on different operating > > systems (ubuntu,windows), reinstalled Freenet all the same.Please tell me > > what could be the reason? > > This likely sounds like an issue which Freenet version build 1468 > introduced > and build 1469 has fixed. > > 1469 was released just a day before your report so it is likely that you > were > still on 1468. > > Can you try whether this still happens with 1469 ? > > Thanks and sorry for the inconvenience > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] Frost
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] inbuilt freenet type design
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Aug 4, 2015 4:35 PM, "Arne Babenhauserheide" wrote: > Hi James, > > If you want to reduce the load on your server, it might be useful to > have a look at the DownloadMesh specification from Gnutella: > > http://rfc-gnutella.sourceforge.net/developer/tmp/download-mesh.html > > It realizes completely decentralized swarming where the server only > needs to provide some initial IPs (instead of managing the swarm as in > the BitTorrent protocol). As soon as a client knows some IPs, it can > get additional ones from these other clients. The server can > additionally point to a static file as alternate source. > > Best wishes, > Arne > > Am Dienstag, 4. August 2015, 15:16:40 schrieb James Jackson: > > Hey, > > I have been working on a project called Bittess, that you might be > > interested in as we seem to have similar goals. The project uses the > latest > > webRTC to set up a peer to peer website within a regular browser without > > any other software. There are some limitations but we managed to get a > > prototype up and running at bittess.com. You can view the code and more > > info on how it works over at our github site > > https://github.com/BitTess/BitTess. > > > > Good luck with your endeavour. > > > > James > > BitTess > > -- > Ein Würfel System - einfach saubere Regeln: > > - http://1w6.org > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Convert to Linus was:Freenet memory useage
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Aug 11, 2015 12:07 PM, "Dave Larsen" wrote: > Just looked in my gmail I don't see a new or compose feild anywhere > On Aug 11, 2015 12:04 PM, "Dave Larsen" wrote: > >> Thank you, but the help on the Linux pages so far have been useless, my >> external hdd is there but I can't use it, there is no tutorial I could find >> that, shows or tells me how to setup and use an external hdd in/on Linux, >> seems no matter where I go o can't find the info I need, I'm not a computer >> geek if these companies or whatever want us to use their products, they >> should have some kind of open q and a, why does one have to create an >> account somewhere to ask questions, even for here, had to sign up to become >> a member to get q and a, there should be fields for questions then if one >> is serious have them enter their email Addy for a reply, anyway no matter >> where I've looked online I can't find anything about setting up a USB hdd >> in Linux maybe you have links or more information that will help but I do >> have Linux now and I would really like to get back to freenetting but can't >> in my current situation please help >> On Aug 11, 2015 4:18 AM, "dean" wrote: >> >>> Hi Dave, >>> >>> On Mon, 2015-08-10 at 20:51 -0500, Dave Larsen wrote: >>> > I don't know how to get Linux I tried all day today every site I >>> > tried to dl something from says windows cannot open this file type or >>> > there is no file type that is supported something like that tried >>> > direct downloads everything the same didn't work >>> >>> I cannot tell from your messages if you have managed to install Linux >>> or not so i will reply both ways. >>> Ok I would recommend doing some research on installing and using Linux >>> before you try anything else. An example: https://www.linux.com/learn/t >>> utorials/784060-the-complete-beginners-guide-to-linux >>> <https://www.linux.com/learn/tutorials/784060-the-complete-beginners-guide-to-linux>. >>> It is not >>> something you can download and run from windows( with the exception of >>> wubi). Normal installation is to download an image, burn/copy to a usb >>> stick/cd/dvd and boot your computer with that. >>> ** This can result in wiping *EVERYTHING ON YOUR HARD DRIVE*** >>> so think twice before doing ;-) >>> >>> > Sorry i don't know how to start a new msg >>> >>> To start a new topic you want to hit 'new' or 'compose' in your email >>> client and use the 'To' address : support@freenetproject.org >>> When you reply to an email you are joining your mail to the existing >>> thread. >>> >>> > but I changed os to Linux but I really don't know what I'm doing, I >>> > would like to put freenet on my external hdd but it doesn't give me >>> > the option that I understand, says something about choosing the >>> > directory, not what disk or drive to put it on I had it on once but >>> > it I believe was on my internal hdd what can/do I do please help new >>> > to Linux but figuring it out slowly thank you >>> >>> In Linux everything is a file there is no c: or d: drives. >>> Normally your first or internal drive is called sda in the 'devices' >>> folder, and your partitions are the number after the drive. so >>> /dev/sda1 'should' be the first partition on your internal drive >>> /dev/sdb or /dev/sdc are 'might' be your external drive - google will >>> help you there too. >>> >>> > The effort of learning Linux will be worth it. >>> >>> This is true, but its a very steep learning curve. >>> >>> Good luck >>> Dean. >>> ___ >>> Support mailing list >>> Support@freenetproject.org >>> http://news.gmane.org/gmane.network.freenet.support >>> Unsubscribe at >>> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >>> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe >> >> ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Unable to connect
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 9, 2015 6:59 PM, "Rolly the Canadian eh" wrote: > Hi, > > OS10 > > Thanx,jm > > > Subject: Re: [freenet-support] Unable to connect > > To: support@freenetproject.org; rollyi...@hotmail.com > > From: st...@asksteved.com > > Date: Wed, 9 Sep 2015 19:10:42 -0400 > > > > On 09/09/2015 03:14 PM, Rolly the Canadian eh wrote: > > > ""Unable to connect > > > > > > Firefox can't establish a connection to the server at 127.0.0.1:. > > > > > > The site could be temporarily unavailable or too busy. Try again in a > few moments. > > > If you are unable to load any pages, check your computer's network > connection. > > > If your computer or network is protected by a firewall or proxy, make > sure that Firefox is permitted to access the Web."" > > > > What operating system are you using? > > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Moving freenet to another partition
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 8, 2015 8:55 AM, "Ivo Vegter" wrote: > To move freenet from /opt to /home, I followed the instructions here: > https://wiki.freenetproject.org/Moving_an_Installation > i.e. I changed all occurrences of /opt in freenet.ini to /home. > > I use systemd, and updated the freenet.service file to reflect the new > location. For good measure, I changed the freenet user's home directory > from /opt/freenet to /home/freenet, too. > > Systemd was unable to start freenet, however. The log says only that the > main process exited with status 1 and the systemd unit consequently failed > with result 'exit-code'. (Exact log below.) > > I found more references to /opt in run.sh and wrapper.config, which > suggests the above wiki page is incomplete, at best. I changed those > occurrences too, but no luck. > > Pls halp. > > Ivo > > LOG (note last 4 lines in particular): > > Sep 08 15:19:27 myhost.mydomain sudo[26977]:myuser : TTY=pts/0 ; > PWD=/home/freenet ; USER=root ; COMMAND=/usr/bin/systemctl start freenet > Sep 08 15:19:27 myhost.mydomain sudo[26977]: pam_unix(sudo:session): > session opened for user root by myuser(uid=0) > Sep 08 15:19:27 myhost.mydomain systemd[1]: Starting Freenet... > -- Subject: Unit freenet.service has begun start-up > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel > -- > -- Unit freenet.service has begun starting up. > Sep 08 15:19:27 myhost.mydomain polkitd[553]: Registered Authentication > Agent for unix-process:26978:25862142 (system bus name :1.82 > [/usr/bin/pkttyagent --notify-fd 5 --fallback], object path > /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8) > Sep 08 15:19:32 myhost.mydomain run.sh[26983]: Starting Freenet done > Sep 08 15:19:32 myhost.mydomain sudo[26977]: pam_unix(sudo:session): > session closed for user root > Sep 08 15:19:32 myhost.mydomain systemd[1]: Started Freenet. > -- Subject: Unit freenet.service has finished start-up > -- Defined-By: systemd > -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel > -- > -- Unit freenet.service has finished starting up. > -- > -- The start-up result is done. > Sep 08 15:19:32 myhost.mydomain polkitd[553]: Unregistered Authentication > Agent for unix-process:26978:25862142 (system bus name :1.82, object path > /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_GB.UTF-8) > (disconnected from bus) > Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Main process > exited, code=exited, status=1/FAILURE > Sep 08 15:19:33 myhost.mydomain run.sh[27031]: Freenet is not running. > Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Unit entered > failed state. > Sep 08 15:19:33 myhost.mydomain systemd[1]: freenet.service: Failed with > result 'exit-code'. > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Uninstall problem
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 10, 2015 8:01 AM, "lmacrock ." wrote: > Hello all, I uninstalled freenet, but my hard drive is still being > accessed. I did not use the uninstall tab on the freenet site, for I really > did not know it was there. any and all help would be great. > > Thanks > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Uninstall Problem
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 10, 2015 10:10 PM, "lmacrock ." wrote: > I uninstalled freenet, but my system is still being accessed the same as > when freenet was installed. I did not use the uninstall tab on the freenet > site, for I really did not know it was there, until I started looking > around for help. What do I need to do to stop this. Any and all help would > be great. > > Thank you > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Installing Freenet on Kali Linux
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 10, 2015 11:42 PM, "dean" wrote: > On 11/09/15 13:00, Pedro Serrano wrote: > > Hello, > > I have problems installing freenet on my Kali Linux. > > > > java.io.IOException: Cannot run program > "/usr/local/Freenet/bin/install_updater.sh":java.io.IOException: error=13, > Permission denied ? > > > > but I'm using root! > > (sorry for my bad english) > > > > Is the script executable? eg ls -l install_updater.sh? > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Cannot install on FreeBSD
Srry I don't know how to start a new subject , but how do I use frost in freenet on my Linux Korora 22 Cinnamon 64bit??? I dld it but it isn't doing anything I'm lost please help!!! On Sep 12, 2015 10:58 AM, "Thor Ablestar" wrote: > Hello! > > I've at last managed to start FreeNet on FreeBSD and at least webgui shows > an intro page. > > The secret was to add a libjcpuid-x86-freebsd.so from > /usr/ports/math/libjbigi/* to Freenet/lib, > after it FreeNet uses net/i2p/util/libjbigi-freebsd-pentium3.so and starts. > > It seems that a libjcpuid is required. > > FreeBSD-10.2-i386, processor Xeon X3440@2.53GHz > > On 09/10/15 08:09, Steve Dougherty wrote: > >> I don't know. That may be. I'm surprised Freenet is attempting to use >> acceleration instead of falling back to a pure Java implementation. Can you >> copy the line about "net/i2p/util/libjbigi" from your wrapper.log please? >> Please reply-all to include the support list instead of emailing only me >> directly. >> > > Anatoly > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Convert to Linus was:Freenet memory useage
Just looked in my gmail I don't see a new or compose feild anywhere On Aug 11, 2015 12:04 PM, "Dave Larsen" wrote: > Thank you, but the help on the Linux pages so far have been useless, my > external hdd is there but I can't use it, there is no tutorial I could find > that, shows or tells me how to setup and use an external hdd in/on Linux, > seems no matter where I go o can't find the info I need, I'm not a computer > geek if these companies or whatever want us to use their products, they > should have some kind of open q and a, why does one have to create an > account somewhere to ask questions, even for here, had to sign up to become > a member to get q and a, there should be fields for questions then if one > is serious have them enter their email Addy for a reply, anyway no matter > where I've looked online I can't find anything about setting up a USB hdd > in Linux maybe you have links or more information that will help but I do > have Linux now and I would really like to get back to freenetting but can't > in my current situation please help > On Aug 11, 2015 4:18 AM, "dean" wrote: > >> Hi Dave, >> >> On Mon, 2015-08-10 at 20:51 -0500, Dave Larsen wrote: >> > I don't know how to get Linux I tried all day today every site I >> > tried to dl something from says windows cannot open this file type or >> > there is no file type that is supported something like that tried >> > direct downloads everything the same didn't work >> >> I cannot tell from your messages if you have managed to install Linux >> or not so i will reply both ways. >> Ok I would recommend doing some research on installing and using Linux >> before you try anything else. An example: https://www.linux.com/learn/t >> utorials/784060-the-complete-beginners-guide-to-linux >> <https://www.linux.com/learn/tutorials/784060-the-complete-beginners-guide-to-linux>. >> It is not >> something you can download and run from windows( with the exception of >> wubi). Normal installation is to download an image, burn/copy to a usb >> stick/cd/dvd and boot your computer with that. >> ** This can result in wiping *EVERYTHING ON YOUR HARD DRIVE*** >> so think twice before doing ;-) >> >> > Sorry i don't know how to start a new msg >> >> To start a new topic you want to hit 'new' or 'compose' in your email >> client and use the 'To' address : support@freenetproject.org >> When you reply to an email you are joining your mail to the existing >> thread. >> >> > but I changed os to Linux but I really don't know what I'm doing, I >> > would like to put freenet on my external hdd but it doesn't give me >> > the option that I understand, says something about choosing the >> > directory, not what disk or drive to put it on I had it on once but >> > it I believe was on my internal hdd what can/do I do please help new >> > to Linux but figuring it out slowly thank you >> >> In Linux everything is a file there is no c: or d: drives. >> Normally your first or internal drive is called sda in the 'devices' >> folder, and your partitions are the number after the drive. so >> /dev/sda1 'should' be the first partition on your internal drive >> /dev/sdb or /dev/sdc are 'might' be your external drive - google will >> help you there too. >> >> > The effort of learning Linux will be worth it. >> >> This is true, but its a very steep learning curve. >> >> Good luck >> Dean. >> ___ >> Support mailing list >> Support@freenetproject.org >> http://news.gmane.org/gmane.network.freenet.support >> Unsubscribe at >> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Convert to Linus was:Freenet memory useage
Thank you, but the help on the Linux pages so far have been useless, my external hdd is there but I can't use it, there is no tutorial I could find that, shows or tells me how to setup and use an external hdd in/on Linux, seems no matter where I go o can't find the info I need, I'm not a computer geek if these companies or whatever want us to use their products, they should have some kind of open q and a, why does one have to create an account somewhere to ask questions, even for here, had to sign up to become a member to get q and a, there should be fields for questions then if one is serious have them enter their email Addy for a reply, anyway no matter where I've looked online I can't find anything about setting up a USB hdd in Linux maybe you have links or more information that will help but I do have Linux now and I would really like to get back to freenetting but can't in my current situation please help On Aug 11, 2015 4:18 AM, "dean" wrote: > Hi Dave, > > On Mon, 2015-08-10 at 20:51 -0500, Dave Larsen wrote: > > I don't know how to get Linux I tried all day today every site I > > tried to dl something from says windows cannot open this file type or > > there is no file type that is supported something like that tried > > direct downloads everything the same didn't work > > I cannot tell from your messages if you have managed to install Linux > or not so i will reply both ways. > Ok I would recommend doing some research on installing and using Linux > before you try anything else. An example: https://www.linux.com/learn/t > utorials/784060-the-complete-beginners-guide-to-linux. It is not > something you can download and run from windows( with the exception of > wubi). Normal installation is to download an image, burn/copy to a usb > stick/cd/dvd and boot your computer with that. > ** This can result in wiping *EVERYTHING ON YOUR HARD DRIVE*** > so think twice before doing ;-) > > > Sorry i don't know how to start a new msg > > To start a new topic you want to hit 'new' or 'compose' in your email > client and use the 'To' address : support@freenetproject.org > When you reply to an email you are joining your mail to the existing > thread. > > > but I changed os to Linux but I really don't know what I'm doing, I > > would like to put freenet on my external hdd but it doesn't give me > > the option that I understand, says something about choosing the > > directory, not what disk or drive to put it on I had it on once but > > it I believe was on my internal hdd what can/do I do please help new > > to Linux but figuring it out slowly thank you > > In Linux everything is a file there is no c: or d: drives. > Normally your first or internal drive is called sda in the 'devices' > folder, and your partitions are the number after the drive. so > /dev/sda1 'should' be the first partition on your internal drive > /dev/sdb or /dev/sdc are 'might' be your external drive - google will > help you there too. > > > The effort of learning Linux will be worth it. > > This is true, but its a very steep learning curve. > > Good luck > Dean. > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Freenet memory useage
I don't know how to get Linux I tried all day today every site I tried to dl something from says windows cannot open this file type or there is no file type that is supported something like that tried direct downloads everything the same didn't work so OK new info I have here I sent the next except already but I figured I would add it here too to go along with the individual that said I should get Linux, here it goes; Sorry i don't know how to start a new msg but I changed os to Linux but I really don't know what I'm doing, I would like to put freenet on my external hdd but it doesn't give me the option that I understand, says something about choosing the directory, not what disk or drive to put it on I had it on once but it I believe was on my internal hdd what can/do I do please help new to Linux but figuring it out slowly thank you Java generally uses 2x the memory you tell it, it is the nature of its memory design. So if you have 1g to spare, give it 512 and it shoudl use 1 gig. It is not random how much it will max at, it is 2x. If your computer is able to lock up because of Java, then that is a flaw of your operating system or hardware. It is technically impossible for a java program to do that. That is the design of java. It cannot be Freenet's fault, as Java is guaranteed to prevent it. The problem is your operating system. Switch to Linux and you won't have any of these problems. Windows/OSX = Microsoft/Apple = American Corporation = NSA. There really is no point in using Freenet on Winblows. You might as well use it on the front steps of their office on a computer you borrow from them. The effort of learning Linux will be worth it. If you are already using linux, then it is guaranteed that you have bad hardware and need to replace your computer. Sv. On Monday, July 20, 2015, at 12:29 PM, Dave Larsen wrote: > If I set my wrapper to 1g, it would prob use 100%of my ram. I've got it set > at 256 cuz at 512, it would almost max out my memory, 4gs, I don't have any > plugins loaded it works fine but just uses so much ram. Is there ANY other > way to reduce memory usage from freenet. Its getting to be more of a pain > in the butt than its worth. The asston is the way I'm describing the amount > of ram freenet uses its crazy how much ram this uses can't run anything > else when freenet is a running or my PC locks up on me and I gotta manually > restart, so far with this new update/upgrade, I haven't lost anything when > the freeze up occurs, but I'm limited to freenet surfing which is more like > watching paint dry lol, normally I watch movies or TV shows but I've > learned that when freenet is running I can't do that I don't have the ram , > my CPU is fine just an asston of ram use from freenet if I don't have > freenet running no ram issues please help ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Freenet Crash Upon Startup in Chrome/ Cannot Choose Firefox for Browser
Sorry i don't know how to start a new msg but I changed os to Linux but I really don't know what I'm doing, I would like to put freenet on my external hdd but it doesn't give me the option that I understand, says something about choosing the directory, not what disk or drive to put it on I had it on once but it I believe was on my internal hdd what can/do I do please help On Aug 6, 2015 9:05 PM, "Steve Dougherty" wrote: > On 08/06/2015 09:48 PM, AltYahoo wrote: > > I get what I assume is a little freenet error message after a bit of > > loading, but I can only see it for a few seconds as it kicks me to a > > Chrome "This page cannot be found" error soon after. I was going to > > try to get a screenshot of the text in said error tomorrow. > > In that case I think what's happening is Freenet launches, the tray app > notes that it has launched, it starts the browser, then Freenet crashes > shortly after because it can't find its files. Moving it to a folder > without special characters in the path to it (like C:\Freenet ) should > fix it. > > The next question is why your Firefox isn't detected. We can get more > information once I'm able to add detailed logging on browser detection, > but for the time being - are your comfortable looking at your registry > to find where the Firefox installation is listed? The tray searches in a > few locations already [0] but apparently we're missing some. > > [0] https://github.com/freenet/wintray/blob/master/Browsers/Firefox.cs#L10 > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Freenet Crash Upon Startup in Chrome/ Cannot Choose Firefox for Browser
I was having the same issue, I uninstalled chrome then ran the setup of freenet it then opened in Firefox, then reinstall chrome Firefox should be your freenet default I'm no expert but it worked for me, I'm guessing that lucario moore didn't uninstall ie prob just turned off in windows programs and features, I don't know how freenet would start if the feature is turned off though On Aug 6, 2015 5:39 PM, "Lucario Moore" wrote: > Fresh after install, Freenet tries and fails to open in Chrome. My Wrapper > log is included as an attatchment. I'd also like to change the default > browser to Firefox but it only shows Chrome and IE (Which I don't have > installed). > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
[freenet-support] Freenet memory useage
If I set my wrapper to 1g, it would prob use 100%of my ram. I've got it set at 256 cuz at 512, it would almost max out my memory, 4gs, I don't have any plugins loaded it works fine but just uses so much ram. Is there ANY other way to reduce memory usage from freenet. Its getting to be more of a pain in the butt than its worth. The asston is the way I'm describing the amount of ram freenet uses its crazy how much ram this uses can't run anything else when freenet is a running or my PC locks up on me and I gotta manually restart, so far with this new update/upgrade, I haven't lost anything when the freeze up occurs, but I'm limited to freenet surfing which is more like watching paint dry lol, normally I watch movies or TV shows but I've learned that when freenet is running I can't do that I don't have the ram , my CPU is fine just an asston of ram use from freenet if I don't have freenet running no ram issues please help ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Back-Off, or something of which nothing is written
i am still having issues with freenet taking an asston of ram, i restarted my pc last nite before i went to bed, got up turned my pc on the only thing that does this is freenet, i looked at my ram its at 68% just started not downloading anything, ive got the wrapper set at 256 max memory but it still goes way above that, is there any other way(s) to control how much memory(ram) freenet or java uses, i cant run 24/7 cuz, and again only when freenet itms running my ram climbs to the roof my pc slows down sometimes freezes up please help thanx On Jul 18, 2015 1:50 AM, "Volodya" wrote: > As i understand the whole process of back-off, just by observing what is > happening with my node: > > There are two numbers, the first is how much time is left for the node to > be > backed off. The second is how much time it was backed-off for during this > incident. When the first counter reaches 0, then it checks whether it can > do > things correctly now. If not, it then increases the second number (doubles > it?) and then sets the first to that value and waits again. If it can > communicate, then it decreases the second number and things operate > normally. > > I wasn't able to catch how the decrease of the duration happens. And wasn't > able to find anything in documentation. > > Is there something written about it, and i just missed it? > I am fine with you just pointing me to the Java class where it happens, > i'll > read the code. > > - Volodya > > -- > Помогите собрать средства на написания учебника по программированию: > > https://boomstarter.ru/projects/volodya/elektronnyy_uchebnik_po_gtkmm_okonnye_pr > ilozheniya_v_c > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] help installing freenet on kali
ok good, i got freenet to start fully now too at startup of windows thanx On Jul 16, 2015 2:21 PM, "Steve Dougherty" wrote: > We've tested on Windows 10 preview builds and it seems fine. > > On Thu, Jul 16, 2015, 3:03 PM Dave Larsen > wrote: > >> also is windows 10 going to affect how freenet runs its coming in the >> 29th, thats when its released, wether or not my computer will be upgraded >> that day or not is another question but it will be soon thereafter!!! >> ___ >> Support mailing list >> Support@freenetproject.org >> http://news.gmane.org/gmane.network.freenet.support >> Unsubscribe at >> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] help installing freenet on kali
also is windows 10 going to affect how freenet runs its coming in the 29th, thats when its released, wether or not my computer will be upgraded that day or not is another question but it will be soon thereafter!!! ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] help installing freenet on kali
freenet doesnt start with Windows, the tray starts but the service itself doesnt start until i hit the icon in the notification area before this up/date/grade it would start it completelt when i hit the notif icon it would go into freenet that was already started, not anymore, is there a way to do this On Jul 8, 2015 12:49 PM, "Arne Babenhauserheide" wrote: > You need to create a non-root user. > > useradd -m freenet > su freenet > cd > # now copy the installer into ~freenet/ and run it there, as user freenet. > > Best wishes, > Arne > > Am Mittwoch, 8. Juli 2015, 11:21:26 schrieb Alejandro Guerra: > > cannot get freenet working on kali linux, when executing the installer i > > get several messages about permission, cannot execute installer as > > root.Please help > > > > no puedo instalar freenet en kali linux, siempre me muestra un mensaje > > diciendo que el instalador no debe ser ejecutado como root. use el > comando > > chmod pero quizas lo hago mal ya que igualmente no logro hacer nada. > Ayuda > > por favor > > -- > Unpolitisch sein > heißt politisch sein, > ohne es zu merken. > - Arne (http://draketo.de) > > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Freenet 0.7.5 build 1468 released
now it is saying i need to put in the master password to to enable uploads and downloads, i never set a password, why is it telling me to enter a master password??? please help On Jul 11, 2015 1:45 PM, "Dave Larsen" wrote: > how do i update, this link in this msg needs a program to open the file, > what do i use to open the file or is there another way to update??? please > help, thanx!!! > On Jul 11, 2015 1:08 PM, "Steve Dougherty" wrote: > >> The Freenet team is very happy to announce the stable release of >> Freenet 0.7.5 build 1468. >> >> >> >> *Important notes*: downgrading from build 1468 is not supported; if you >> want to go back to build 1467 without losing the upload and download >> queues, *before* upgrading, back-up the following files and >> directories: master.keys, persistent-temp-*/, and node.db4o (see >> https://wiki.freenetproject.org/Program_files ). Please note that >> running transfers will be restarted from scratch too. A reminder to >> those testing auto-update to 1468-pre4: please restore your auto-update >> key to the default. One way to do this is to stop Freenet, remove the >> "node.updater.URI" line from freenet.ini, and start Freenet again. >> >> >> >> In this release, the way Freenet stores data locally has changed >> drastically by no longer using the now-deprecated db4o object storage. >> It is replaced with the product of toad's summer of work - a custom >> on-disk format that is much more robust against corruption and more >> efficient. >> >> >> >> * Existing unfinished downloads and uploads will be imported to a new >> format, which requires restarting them from the beginning. >> >> * Space for downloads is now all allocated at the start, so machines >> very low on disk space may run out, which causes downloads to >> temporarily fail until more space is available. >> >> * CHKs will change due to metadata bugfixes. >> >> * Some unofficial plugins will need to be updated because of API >> changes. Sone already works, as do all official plugins. >> >> * The queue format changes should make it extremely rare to lose the >> entire queue: the impact of corruption will almost always be >> localized. >> >> * Multi-container / site uploads can now be persistent, making it more >> practical to upload large sites. >> >> * Passworded physical security is now much stronger. (Full-disk >> encryption is still preferable.) >> >> >> >> * The Windows installer now defaults to starting Freenet on login. >> >> * There is a new Windows tray app with some useful features that is >> included with new installations. [0] If you are using the existing >> Windows tray app you can download the new one here. [1] No need to put >> it in a specific directory - it will try the default installation >> location and prompt if it can't find it. >> >> >> >> * The list of download keys moved from downloads/listFetchKeys.txt to >> downloads/listKeys.txt. >> >> * A list of upload keys is now available at uploads/listKeys.txt >> >> >> >> * Gantros' index is now in the default bookmarks. It uses the same >> software as Enzo's index, which is no longer updated. >> >> >> >> * The obsolete and deprecated XMLLibrary and XMLSpider plugins are no >> longer officially supported. They will still load for those who have >> them added, but are no longer shown on the plugin page. >> >> * In the interests of releasing this build more quickly, the new >> version of FlogHelper does not support exporting and importing backups >> from the web UI. The old backup code did not work with the new Freenet >> version after removing db4o. People can instead back up >> "plugins.floghelper.FlogHelper" files in the plugin-data directory. >> These can be dropped into the directory after unloading FlogHelper to >> restore a backup. >> >> * ThawIndexBrowser works again. Thanks saces! >> >> >> >> * Fred translations are updated. >> >> >> >> * Add two seed nodes, one sponsored by meshnet.pl - the Polish >> radio/meshnet darknet users group, and another run by ArneBab. Thanks! >> >> * Update existing seed node references. >> >> >> >> >> >> Thank you for using Freenet! >> >> >> >> [0] https://github.com/freenet/wintray >> >> [1] >> >> https://downloads.freenetproject.org/alpha/installer/FreenetTray.exe.build01468 >> >> >> ___ >> Support mailing list >> Support@freenetproject.org >> http://news.gmane.org/gmane.network.freenet.support >> Unsubscribe at >> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe >> > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Freenet 0.7.5 build 1468 released
how do i update, this link in this msg needs a program to open the file, what do i use to open the file or is there another way to update??? please help, thanx!!! On Jul 11, 2015 1:08 PM, "Steve Dougherty" wrote: > The Freenet team is very happy to announce the stable release of > Freenet 0.7.5 build 1468. > > > > *Important notes*: downgrading from build 1468 is not supported; if you > want to go back to build 1467 without losing the upload and download > queues, *before* upgrading, back-up the following files and > directories: master.keys, persistent-temp-*/, and node.db4o (see > https://wiki.freenetproject.org/Program_files ). Please note that > running transfers will be restarted from scratch too. A reminder to > those testing auto-update to 1468-pre4: please restore your auto-update > key to the default. One way to do this is to stop Freenet, remove the > "node.updater.URI" line from freenet.ini, and start Freenet again. > > > > In this release, the way Freenet stores data locally has changed > drastically by no longer using the now-deprecated db4o object storage. > It is replaced with the product of toad's summer of work - a custom > on-disk format that is much more robust against corruption and more > efficient. > > > > * Existing unfinished downloads and uploads will be imported to a new > format, which requires restarting them from the beginning. > > * Space for downloads is now all allocated at the start, so machines > very low on disk space may run out, which causes downloads to > temporarily fail until more space is available. > > * CHKs will change due to metadata bugfixes. > > * Some unofficial plugins will need to be updated because of API > changes. Sone already works, as do all official plugins. > > * The queue format changes should make it extremely rare to lose the > entire queue: the impact of corruption will almost always be > localized. > > * Multi-container / site uploads can now be persistent, making it more > practical to upload large sites. > > * Passworded physical security is now much stronger. (Full-disk > encryption is still preferable.) > > > > * The Windows installer now defaults to starting Freenet on login. > > * There is a new Windows tray app with some useful features that is > included with new installations. [0] If you are using the existing > Windows tray app you can download the new one here. [1] No need to put > it in a specific directory - it will try the default installation > location and prompt if it can't find it. > > > > * The list of download keys moved from downloads/listFetchKeys.txt to > downloads/listKeys.txt. > > * A list of upload keys is now available at uploads/listKeys.txt > > > > * Gantros' index is now in the default bookmarks. It uses the same > software as Enzo's index, which is no longer updated. > > > > * The obsolete and deprecated XMLLibrary and XMLSpider plugins are no > longer officially supported. They will still load for those who have > them added, but are no longer shown on the plugin page. > > * In the interests of releasing this build more quickly, the new > version of FlogHelper does not support exporting and importing backups > from the web UI. The old backup code did not work with the new Freenet > version after removing db4o. People can instead back up > "plugins.floghelper.FlogHelper" files in the plugin-data directory. > These can be dropped into the directory after unloading FlogHelper to > restore a backup. > > * ThawIndexBrowser works again. Thanks saces! > > > > * Fred translations are updated. > > > > * Add two seed nodes, one sponsored by meshnet.pl - the Polish > radio/meshnet darknet users group, and another run by ArneBab. Thanks! > > * Update existing seed node references. > > > > > > Thank you for using Freenet! > > > > [0] https://github.com/freenet/wintray > > [1] > > https://downloads.freenetproject.org/alpha/installer/FreenetTray.exe.build01468 > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Fwd: Race conditions?
what is this race conditions thing? whats the new release, freenet upgrade/update, new version??? On Jul 7, 2015 1:37 PM, "Arne Babenhauserheide" wrote: > > Dear Bhargava Manja, > > Thank you for your report of potential race conditions in Freenet! > > We welcome your tests, but we are less than a week before a big > release which we do not want to delay any further (we have to release > at some point, and that point is next weekend), so we won’t be able to > address the issues before this release. > > It is likely that the race conditions are real, since there are tons > of new code in this release, but they do not seem to have a large > impact, so we’ll only be able to check them in more details after the > release. I hope that suffices for your tests. > > Until then you can run a Freenet node yourself to check whether you > can detect the effect race conditions in real usage. > > Best wishes, > Arne > -- > Ich hab' nichts zu verbergen – hab ich gedacht: > > - http://draketo.de/licht/lieder/ich-hab-nichts-zu-verbergen > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] Java announcement
What do you mean (with cd) i dld java and freenet online no cd On Jun 6, 2015 9:33 AM, "Steve Dougherty" wrote: > > You have a way to start Freenet without the tray? Does that not use the run.sh? The tray is not strictly necessary, and the currently deployed version is out of date. We have a new version of it written but it's not deployed yet. > > > > You can start Freenet without the tray by opening a terminal, navigating to the directory Freenet is installed to (with cd), and running ./run.sh start > > > On Sat, Jun 6, 2015, 3:33 AM blupace wrote: >> >> Hey, , >> >> So I did a little testing. >> It looks like when I exit freenet and also exit the freenet node starter, If I then fire up Freenet Tray, the node starter does not start. >> How do I initiate the node starter? >> >> Kind regards, >> >> Pace >> >> > On Jun 5, 2015, at 10:38 PM, Steve Dougherty wrote: >> > >> > On 06/05/2015 03:09 AM, blupace wrote: >> >> Hi, I have just started to follow the freenet project and I am testing it on >> >> MAC. Installation goes well, but I always get the error below. >> >> I have upgraded to Java version and verified it on the Java verification page in >> >> the same browser that I use with freenet. >> >> >> >> >> >> >> >> Your Java version 1.6.0_65 is at its "End Of Life" and is no longer receiving >> >> updates to fix security problems. >> >> Freenet will require version 1.7 or higher in a future update, so it will stop >> >> working with this one. >> >> Please upgrade your Java installation. >> >> >> >> >> >> Any help appreciated. >> >> >> >> >> >> Regards, >> >> >> >> >> >> Pace >> > >> > This may be something we've fixed in the development version. Does the >> > message go away if you shut down Freenet, replace run.sh in the >> > directory Freenet is installed to with this file [0], and start Freenet >> > again? The newer version of the script should be more effective at >> > discovering modern Java installations on Macs. >> > >> > - Steve >> > >> > [0] >> > https://raw.githubusercontent.com/freenet/java_installer/next/res/unix/run.sh >> > > > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
would it help if i put freenet on an external hdd, brand new nothing has been on it, formatting it now, the idea in my mind is getting it away from my os, im still getting the javaio eofexception, i have uninstalled and deleted all freenet files reinstalled it and left all the settings default except the amount of datastore i kept that at 100 gig,I am sorry i was / am a jerk, not trying to be just want this to work, please help On May 19, 2015 12:10 PM, "Dave Larsen" wrote: > i have done everything ppl have asked of me and nothing has worked, i > heard of this and thought this is where i need to be, but im having > nothing but issues when ive seen stuff downloaded, and was told it came > from freenet, i have had it set at all defaults and still got the same > issues as i did after i messed with the settings, my speed rose and my > peers rose but error upon error after dl stuff i have givin all my info to > several "help" people such as yourself and i keep on getting the same > answers, or useless info, why cant i get this to work right, but im > trying what you asked vicktor hopefully its a thanx, if not ill be asking > for more help, im not trying to be rude i have anger issues that i cant > control i just want this to work thats why i get so upset, i did apologize > several times too but if i cant get this going right there mite be more of > my anger coming out to you, i dont want that, you all dont want that so > please just real useful info that works, thats all im aaking, i cant help > it if i get mad, i have mental issues so help the disabled rather than > shun them please please please, im trying to be good and nice and am > asking, as i have the whole time, by me capping everything was just so you > all may be able to read and figure out what i need to do, im sorry that > was wrong i just dont want to be trying to enjoy freenet, i want to enjoy > it, > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
i have done everything ppl have asked of me and nothing has worked, i heard of this and thought this is where i need to be, but im having nothing but issues when ive seen stuff downloaded, and was told it came from freenet, i have had it set at all defaults and still got the same issues as i did after i messed with the settings, my speed rose and my peers rose but error upon error after dl stuff i have givin all my info to several "help" people such as yourself and i keep on getting the same answers, or useless info, why cant i get this to work right, but im trying what you asked vicktor hopefully its a thanx, if not ill be asking for more help, im not trying to be rude i have anger issues that i cant control i just want this to work thats why i get so upset, i did apologize several times too but if i cant get this going right there mite be more of my anger coming out to you, i dont want that, you all dont want that so please just real useful info that works, thats all im aaking, i cant help it if i get mad, i have mental issues so help the disabled rather than shun them please please please, im trying to be good and nice and am asking, as i have the whole time, by me capping everything was just so you all may be able to read and figure out what i need to do, im sorry that was wrong i just dont want to be trying to enjoy freenet, i want to enjoy it, ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
im just pissed trying to get this to work and nothing is helping please help On May 19, 2015 10:13 AM, "Victor Denisov" wrote: > Dave, after subscribing to the support mailing list, you're getting all > emails sent by all subscribers; Dennis' answer to a Linux question > wasn't directed at you. > > To answer your question (even if you've been *extremely* rude to the > volunteers who run this project), please try doing the following: > > 1. Uninstall and reinstall Freeenet. Seriously. Please do it. > 2. Before starting Freenet, open the wrapper configuration file > ("wrapper\wrapper.conf" in your Freenet installation directory) in > Wordpad, and find the following line: > > wrapper.java.maxmemory=512 > > 3. Change it to > > wrapper.java.maxmemory=1024 > > 4. Adjust your bandwidth settings and adjust the following sizes: > > Maximum size of a RAMBucket: 4MB > Amount of RAM to dedicate to temporary buckets: 128MB > Freenet datastore size: 100GB > Maximum size of the in-memory write cache for each store: 4MB > Client cache size: 1GB > > Do not change any other settings before you've run Freenet successfully > for at least a month or so, then you can start to gently tweak your > configuration further. > > Finally, do not start more than ~10 downloads at once, especially if > they're for large (> 100 MB) files. > > Regards, > Victor Denisov. > > On 19.05.2015 6:06, Dave Larsen wrote: > > please what am i supposed to do i dont have a bin file i dont see any > > updater file except the windows cmd thing if i uninstall and reinstall i > > gotta go through all the settings again what is going on it seems like > > if im trying to better my computer or this i try to follow the > > instructions but in the slashed list order of files the one i need is > > never there HELP PLEASE > > > > On May 17, 2015 11:01 AM, > <mailto:oscar1...@anche.no>> wrote: > > > > How to fix java.io.IOException: Cannot run program > > "/usr/local/Freenet/bin/install_updater.sh":java.io > > <http://java.io>.IOException: error=13, Permission denied ? > > ___ > > Support mailing list > > Support@freenetproject.org <mailto:Support@freenetproject.org> > > http://news.gmane.org/gmane.network.freenet.support > > Unsubscribe at > > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > > Or mailto:support-requ...@freenetproject.org > > <mailto:support-requ...@freenetproject.org>?subject=unsubscribe > > > > > > > > ___ > > Support mailing list > > Support@freenetproject.org > > http://news.gmane.org/gmane.network.freenet.support > > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
please what am i supposed to do i dont have a bin file i dont see any updater file except the windows cmd thing if i uninstall and reinstall i gotta go through all the settings again what is going on it seems like if im trying to better my computer or this i try to follow the instructions but in the slashed list order of files the one i need is never there HELP PLEASE On May 17, 2015 11:01 AM, wrote: > How to fix java.io.IOException: Cannot run program > "/usr/local/Freenet/bin/install_updater.sh":java.io.IOException: > error=13, Permission denied ? > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
i get the java.io.eofexception after i suppisidly successfully dl a file, i insalled it from the program i dl online, are there forgeries of this program that will allow access but not to successfully dl anything On May 18, 2015 12:33 PM, "Bert Massop" wrote: > > On 17-05-15 15:14, oscar1...@anche.no wrote: > > How to fix java.io.IOException: Cannot run program > > "/usr/local/Freenet/bin/install_updater.sh":java.io.IOException: > > error=13, Permission denied ? > > Please elaborate: > - Where did you see this error message? > - What where you trying to accomplish when you received the error message? > - What did you expect to happen instead? > - What happened after you dismissed the error, if anything? > > My guess would be that you were trying to install Freenet through the > installer, and that it failed half-way yielding the mentioned error > message, instead of properly finishing the installation. > > To further assist in tracking down the source of your problems, please > include the output of the following command, right after you receive the > error message: > > ls -ld /usr/local/Freenet/bin /usr/local/Freenet/bin/* > > The above command lists the file permission information on several files > related to the installation of Freenet. > > — Bert > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] some problem to install freenet on linux
i have win 7 64 bit, what is distro, i installed the program and set the settings, i dont know if its running root how would i know if its running root, how do i fix the java io eofexception error wheres the updater, i should be up to date im BRAND NEW to this i dont have linux or ubuntu thats where all the helpful, useful, (if i had it) , information, but thats old news, too, where is this, install_updater. sh":java. io.ioexception, but thats not the issue im having, its java.io.EOFException, WILL THAT TAKE CARE OF THIS On May 18, 2015 10:22 AM, "Dennis New" wrote: > On Sun, 17 May 2015 13:14:03 +, oscar1...@anche.no wrote: > > How to fix java.io.IOException: Cannot run program > > "/usr/local/Freenet/bin/install_updater.sh":java.io.IOException: > > error=13, Permission denied ? > > Which distro are you using? Ideally it should have a package for > freenet, and they should handle this bug. > > Alternatively, are you running that program (install_updater?) as root? > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] PLEASE HELP FREENET ISSUES
by the way one guy asked for my logs so i sent him that plus i think it was the same guy i sent all my settings and system info to, but i got a msg saying that email was too big and was awaiting moderation i had no idea there was a size limit to an email , how would freenet work without the wrapper the thought of that confuses me but ok, please help, i really would like to enjoy it instead of trying to another thing that confuses me is how would anyone know what to do with the advanced settings, if theyre something that shouldnt be messed with, maybe they shouldnt be there, or as i suggested maybe you could have some kind of, as i said, beginner to pro advanced configuration guide along with the program when its downloaded so everyone can enjoy the innerinternet instead of trying to, im done jabbering just need help i want it to work good On May 18, 2015 2:31 AM, "Dave Larsen" wrote: > no the wrapper is working just fine i sent another email saying how > exactly i have it set up my system info thats exactly what i am trying to > figure out i have plenty of space to use and i just need to know what to > do to increase the amount of peers cuz i had it set where there was no > advanced settings that i changed, but i wasnt getting any peers so i > changed a few things things sped up a bit and i was starting to get more > peers, was averaging about 30 when running i have it going rite now trying > to dl a file 64 peers , is there a way you can see the other emails i sent > i was pretty upset stuff kept going wrong am still hopeful for "Advanced > setting tips" it obviously works better if its configured in an advanced > way ive seen the difference just crashing and java errors please if you can > look at my other emails and instead of having me go with default please i > have the room and speed for it > On May 18, 2015 1:27 AM, "Bert Massop" wrote: > >> On 18-05-15 00:34, Dave Larsen wrote: >> > OK IVE TOLD YOU MY SYSTEM AND HOW I HAVE IT SET UP WAS JUST TELLING WHAT >> > PROGRAMS I DO HAVE WHICH ARENT MANY. , YOU SAY TO GHANGE MY >> CONFIFURATION >> > SETTINGS WITH THE DETAILS I GAVE YOU >> > >> > [configuration omitted] >> > >> > SO HOW AM I SUPPOSED TO SET THIS , IF THIS IS WRONG HOW SHOULD I HAVE >> IT >> > SET ACCORDING TO MY SYSTEM DETAILS AND THIS PLEASE HELP ME YOU SAID >> > SOMETHING BOUT NOT HAVING ENOUGH MEMORY I HAVE OVER 300 G LEFT ON MY HDD >> > HOW DO I NOT HAVE ENOUGH MEMORY >> > >> > >> > **'Maximum memory usage' in >> > the 'Configuration → Core settings' menu, under the 'Wrapper' heading. >> > THERE WAS/ IS NOTHING TO DO WITH THIS IN CORE SETTINGS >> > THE ONLY THING THAT HAS TO DO WITH THE WRAPPER IS Skip "not using the >> > wrapper" warning? >> > SO WHERE IS THIS MAX MEM SETTING FOR THE WRAPPER >> > >> > REALLY IM NOT TRYING TO BE AN ASS I JUST WANT THIS TO WORK PLEASE >> HELP >> > PLEASE NO MORE BUNK OR OLD OR USELESS INFO, NOW YOU KNOW EXACTLY HOW I >> HAVE >> > IT SET UP YOU HAVE MY SYSTEM INFO, SERIOUSLY, WHAT SHOULD I DO >> DIFFERENTLY >> > >> >> >> You seem to be running Freenet without the wrapper. This is not >> recommended. Also, you have changed your advanced configuration settings >> where you definitely shouldn't have, since you seem to have no idea what >> you are doing. Here's my final advice: >> >> 1. Uninstall Freenet. >> 2. Download the latest Freenet installer. >> 3. Run the installer and follow the instructions. >> 4. Answer the questions in the first-time configuration wizard. >> 5. Don't touch any of the other configuration options. Ever. >> >> I sincerely hope you manage to succeed in running Freenet given this >> extremely simple instructions. Either way, don't expect me to respond to >> any of your further questions. At least not until you have bothered to >> fix both your apparently malfunctioning keyboard and your attitude >> towards those trying to help you. >> >> — Bert >> >> >> ___ >> Support mailing list >> Support@freenetproject.org >> http://news.gmane.org/gmane.network.freenet.support >> Unsubscribe at >> http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support >> Or mailto:support-requ...@freenetproject.org?subject=unsubscribe >> > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] PLEASE HELP FREENET ISSUES
no the wrapper is working just fine i sent another email saying how exactly i have it set up my system info thats exactly what i am trying to figure out i have plenty of space to use and i just need to know what to do to increase the amount of peers cuz i had it set where there was no advanced settings that i changed, but i wasnt getting any peers so i changed a few things things sped up a bit and i was starting to get more peers, was averaging about 30 when running i have it going rite now trying to dl a file 64 peers , is there a way you can see the other emails i sent i was pretty upset stuff kept going wrong am still hopeful for "Advanced setting tips" it obviously works better if its configured in an advanced way ive seen the difference just crashing and java errors please if you can look at my other emails and instead of having me go with default please i have the room and speed for it On May 18, 2015 1:27 AM, "Bert Massop" wrote: > On 18-05-15 00:34, Dave Larsen wrote: > > OK IVE TOLD YOU MY SYSTEM AND HOW I HAVE IT SET UP WAS JUST TELLING WHAT > > PROGRAMS I DO HAVE WHICH ARENT MANY. , YOU SAY TO GHANGE MY CONFIFURATION > > SETTINGS WITH THE DETAILS I GAVE YOU > > > > [configuration omitted] > > > > SO HOW AM I SUPPOSED TO SET THIS , IF THIS IS WRONG HOW SHOULD I HAVE IT > > SET ACCORDING TO MY SYSTEM DETAILS AND THIS PLEASE HELP ME YOU SAID > > SOMETHING BOUT NOT HAVING ENOUGH MEMORY I HAVE OVER 300 G LEFT ON MY HDD > > HOW DO I NOT HAVE ENOUGH MEMORY > > > > > > **'Maximum memory usage' in > > the 'Configuration → Core settings' menu, under the 'Wrapper' heading. > > THERE WAS/ IS NOTHING TO DO WITH THIS IN CORE SETTINGS > > THE ONLY THING THAT HAS TO DO WITH THE WRAPPER IS Skip "not using the > > wrapper" warning? > > SO WHERE IS THIS MAX MEM SETTING FOR THE WRAPPER > > > > REALLY IM NOT TRYING TO BE AN ASS I JUST WANT THIS TO WORK PLEASE > HELP > > PLEASE NO MORE BUNK OR OLD OR USELESS INFO, NOW YOU KNOW EXACTLY HOW I > HAVE > > IT SET UP YOU HAVE MY SYSTEM INFO, SERIOUSLY, WHAT SHOULD I DO > DIFFERENTLY > > > > > You seem to be running Freenet without the wrapper. This is not > recommended. Also, you have changed your advanced configuration settings > where you definitely shouldn't have, since you seem to have no idea what > you are doing. Here's my final advice: > > 1. Uninstall Freenet. > 2. Download the latest Freenet installer. > 3. Run the installer and follow the instructions. > 4. Answer the questions in the first-time configuration wizard. > 5. Don't touch any of the other configuration options. Ever. > > I sincerely hope you manage to succeed in running Freenet given this > extremely simple instructions. Either way, don't expect me to respond to > any of your further questions. At least not until you have bothered to > fix both your apparently malfunctioning keyboard and your attitude > towards those trying to help you. > > — Bert > > > ___ > Support mailing list > Support@freenetproject.org > http://news.gmane.org/gmane.network.freenet.support > Unsubscribe at > http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support > Or mailto:support-requ...@freenetproject.org?subject=unsubscribe > ___ Support mailing list Support@freenetproject.org http://news.gmane.org/gmane.network.freenet.support Unsubscribe at http://emu.freenetproject.org/cgi-bin/mailman/listinfo/support Or mailto:support-requ...@freenetproject.org?subject=unsubscribe
Re: [freenet-support] PLEASE HELP FREENET ISSUES
OK IVE TOLD YOU MY SYSTEM AND HOW I HAVE IT SET UP WAS JUST TELLING WHAT PROGRAMS I DO HAVE WHICH ARENT MANY. , YOU SAY TO GHANGE MY CONFIFURATION SETTINGS WITH THE DETAILS I GAVE YOU OK HERES HOW I HAVE FREENET CORE SETTINGS 1 LANGUAGE = ENG 2 AUTO NODE ENCRYPTION = TRUE 3 LOCATION MASTERKEYS FILE = MASTER KEYS 4 DERFAG DL DATABASE DURING NEXT RESTART= IVE DONE THIS EVERY FIRST RUN WHEN I INSTALLED IT AND EVERY FIRST RUN ON REINSTALL 5 DEFRAG ONCE = ALWAS ON FIRST RUN 6 SHOW FRIENDS VIS,= NO FRIENDS SO I CHOOSE FALSE 7 DISABLE PROBALISTIC HTL = FALSE 8 MAXIMUM HTL= 18 9 IPADDY OVERWRITE = BLANK 10 TEMP IP HINT = BLANK 11 ARKS ENABLED = TRUE 12 ENABLE PER-NODE FAILURE TABLES = TRUE 13 ENABLE ULPR DATA PROPAGATION = TRUE 14 LOCATION SWAPPING = TRUE 15 LOCATION OF PEERS TO PEERS = TRUE 16 LOCATION OF THE PEERS OF OUR PEERS INTO ACCOUNT FOR ROUTING PURPOSES = TRUE 17 QUEUEING OF SWAP REQUESTS = TRUE 18 PACKET COALESCING = TRUE 19 DARKNET PORT (UDP) = 33268 20 IP TI BIND TO = 0.0.0.0 21 TESTING PACKET DROP FREQ = 0 22 LIMIT 1 CONN PER ADDY (FRIENDS) = FALSE 23 CONNECT NODES VIA LOCAL ADDY = TRUE 24 PORT NOT FWDED = TRUE 25 INCLUDE LOC ADDY IN NODEREF = TRUE 26 PAD DATA SENT = TRUE 27 U LOAD BW LIMIT = 59 MBPS ( FREENET DETECTS IT) 28 D LOAD BW LIMIT = 59 MBPS ( FREENET DETECTS IT) 29 THROTTLE LOCAL TRAFFIC = TRIED IT BOTH WAYS CURRENTLY SET AT TRUE 30-36 = TRUE ( I DONT WANT REFUSALS, SO I DIDNT TOUCH THESE 37 RESPOND TO PROBE REQ FOR OF PROPORTION OF REQ OF VARIOUS KINDS REJECTED = FALSE 38 Respond to probe requests for overall capacity usage and very approximate bandwidth limit = FALSE 39 Randomly assigned identifier for probe requests =-5130538877874163014 (THE NUMBER GIVIN I DIDNT TOUCH THIS EITHER) 40 ENCRYPT PERSISTANT TEMP RAM BUCKETS = TURE 41 MIN RAM BUCKET = 20 GIB ( DID THIS SIZE CUZ IT WOULD SAVE AS A FILE TO DISK FOR BIGGER BUCKETS 42 RAM DEDICATED TEMP BUCKETS = 240 MIB 43 ENCRYPT TEMP BUCKETS = TRUE 44 DEF DL DIR = \ DOWNLOADS 45 DIR DL TO = ALL 46 DIR UL IS = ALL 47 MAX USK FETCHERS= 150 48 COMMIT AFTER EVERY DATABASE JOB = TRUE 49 OPENNET NODEREF THROUGH DARKNET PEERS = TRUE 50 LARGE STORE SHRINKS IMMEDIATELY = FALSE 51 DATASTORE TYPE = SALT-HASH 52 FREENET DATASTORE SIZE = 100 GIB 53 SLOT FILTERS = TRUE 54 PERSISTANCE INTERVAL FOR SLOT FILTERS = 300K (NUM GIVIN DIDNT TOUCH) 56 PREALLOCATE SPACE FOR DATASTORE = TRUE 57 9 DATASTORE CACHES = 20 GIB 58 MAXTIME BLOCKS STAY INMEM BEFORE WRITTIN TO DISK = 300K (NUM GIVIN DIDNT TOUCH 59 CLIENT CACHE TYPE = SALT-HASH 60 CLIENT CACHE SIZE= 20 GIB 61 30 MIN CACHE = TRUE 62 WRITE LOCAL AND NEARBY REQ TO DATASTORE = FALSE 63 HOW LONG TO KEEP RECENT REQ IN CACHE = 1800K (NUM GIVIN DIDNT TOUCH) 64 Maximum size of the recent requests cache (in bytes, KB MB GB TB etc) = 27000KiB ( NUM GIVIN DIDNT TOUCH 65 Skip "not using the wrapper" warning? = FALSE ( THE ONLY THING HERE IN CORE SETTINGS THAT MENTIONS THE WRAPPER 66 Maximum packet size (aka MTU) = 1280 (NUM GIVIN DIDNT TOUCH) 66 Enable FNPRoutedPing? = FALSE SO HOW AM I SUPPOSED TO SET THIS , IF THIS IS WRONG HOW SHOULD I HAVE IT SET ACCORDING TO MY SYSTEM DETAILS AND THIS PLEASE HELP ME YOU SAID SOMETHING BOUT NOT HAVING ENOUGH MEMORY I HAVE OVER 300 G LEFT ON MY HDD HOW DO I NOT HAVE ENOUGH MEMORY **'Maximum memory usage' in the 'Configuration → Core settings' menu, under the 'Wrapper' heading. THERE WAS/ IS NOTHING TO DO WITH THIS IN CORE SETTINGS THE ONLY THING THAT HAS TO DO WITH THE WRAPPER IS Skip "not using the wrapper" warning? SO WHERE IS THIS MAX MEM SETTING FOR THE WRAPPER REALLY IM NOT TRYING TO BE AN ASS I JUST WANT THIS TO WORK PLEASE HELP PLEASE NO MORE BUNK OR OLD OR USELESS INFO, NOW YOU KNOW EXACTLY HOW I HAVE IT SET UP YOU HAVE MY SYSTEM INFO, SERIOUSLY, WHAT SHOULD I DO DIFFERENTLY On Sun, May 17, 2015 at 3:54 AM, Bert Massop wrote: > On 17-05-15 07:26, Dave Larsen wrote: > > 2ND, im browsing with 40-60 peers accessing my FREENET node, but all of a > > sudden, i get a screen saying FREENET is startingup or shutting down, > when > > i didnt do anything to stop it > > This is most likely caused by a misguided configuration. > > > 3RD, when i can stay "on" long enough to dl a file, […] > > them /or save and restore them, or, i get internal java lang heapspace > > error > > And here's the evidence. The restarts you experience are in fact crashes > due to Freenet running out of memory. > > Your node seems to be configured it in such a way that it requires more > system memory than it's assigned. Please try to increase your node > memory assignment. The setting to change is 'Maximum memory usage' in > the 'Configuration → Core settings' menu, under the 'Wrapper' heading. > > > but the worst one is, i have a file comp
[freenet-support] PLEASE HELP FREENET ISSUES
PLEASE HELP FREENET ISSUES i opened this account to seek help with apparently, EVERY aspect of FREENET. !ST off, why is there no easy to reach REAL, useful, help and support for CORRECTLY setting up, and CORRECTLY configuring, for maximum preformance,and useability OF FREENET 2ND, im browsing with 40-60 peers accessing my FREENET node, but all of a sudden, i get a screen saying FREENET is startingup or shutting down, when i didnt do anything to stop it, if it was started, it shouldnt stop unless I,(ME) stops it, i have it set up to start at my computers startup, so theres no reason for it to startup again unless, I,(ME), stops it. 3RD, when i can stay "on" long enough to dl a file, i generally get an error of some kind, saying either; certain files are corrupted, to delete them /or save and restore them, or, i get internal java lang heapspace error/ but the worst one is, i have a file complete but i get a ; "java.io.EOFException", for 99% of what i have "successfully downloaded" , not too successful, huh, All of what i have tried to dl has been less than 1.16 gib, tried fetching them every way possible but i almost always get the above issues. 4TH, i am doing this on brand new, 500gb 7200 rpm hdd, 4 g ram, 60mbps up, and download wifi speed, (my computer reads 72mbps for that), freenet detects 59mbps for my up and dl speeds, no data limit, no bandwidth limit, i have dedicated 100 gib of space for the datastore, and 20gb each, for the 3 other stores, i have my ram cache, (instead of the 43mib it wants to give me), i set it up to 240 mib. i have my os, FREENET, java, 7zip, chrome, adobe flash player and vlc player, i also have 1 3rd party system cleaning program and one ram boost program. my os and all its files are on a partition with mozilla, and the booster and cleaner, with 226 of 248 gb freespace, the rest is on its own partition with 98 of 217 gb freespace, so i should, by rights, have plenty of space and speed for this program i have also done the things to speed up and hold mem longer and this and that for mozilla firefox but nothing worksive tuned my pc for best preformance i disk clean virus check and defrag on a semi-regular basis i can almost always get to where i want to go, but when i start trying to dl stuff, all hell breaks loose, ive been trying this for a month now and i may have successfully downloaded 3-4 working files, but with all the crap that keeps hapening, i loose it, please help, even if this isnt the right page for help, i really like where i can go here in the FREENET, and would like to become a valued participant, maybe even a donor, but, if it dont work, im not going to waste my time and money, ive already put in 200 hours of pretty much unsuccessful effort, and maybe, if im lucky, 10-15 successful hours in, please even if this is not the right place, if you can, forward this to someone that can help, im giving my permission to do so, or point me in the right direction for REAL HELP AND SUPPORT FOR FREENET, google is removing info from the web to assist with freenet, i couldnt find any useful help on tor either, if therer is info out there its either old or removed,crossed off on google, hopefully, its worth saying this , but i doubt it,cuz i havent had any luck finding real help yet, but im going to say, thank you in advance for taking the time to read this and for any future associations sincerely thisguy0417 this second part i was upset it looks like im yelling because until now all the places they told me to try were dead ends i singed up with your mailing list but never got anything back until today i do say stupid things when im upset and i apologize for my stupidity , ive been having issues with it since the 1st time i downloaded it,and have been fruitlessly seeking help, i just want this to work right i know its slow im not looking to speed up my setup of freenet, i just want to be able to keep it running without crashing out every other 10 or 15 mins and not get all the errors i get all the time and the random shutdownsand startups, sometimes ill click on a tab ,changes to that tab, then its a page that says freenet is starting up, i have it set to start at my computers startup so why does this happen or the random shutdowns, when i start it it should stay running until i stop it,even if there are no nodes connected, i gave all the details i could in the above the only reason i sent the bottom one, is because when im upset i also come up with some good ideas and thrers a real good one down there again i apologize for my upset stupidity but please read on I DID SUBSCRIBE, I DID THE FREE THING, I GAVE MY EMAIL ADDY BUT I NEVER GOT A VERIFICATION EMAIL AND I REPEATEDLY SENT THE VERIFICATION MESSAGE FROM HERE BUT NVR GOT IT CHECK YOUR SYSTEM, I FILLED OUT THE SUBSCRIPTION , MADE MY USERNAME AND PASSWORD I DONT UNDERSTAND WHY YOURE SAYING I NEED TO SUBSCRIBE,BUT, IM GLAD SOMEONE REPLIED, HOWEVER ALL