Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Thank´s all for your help. I think i´m going the easiest way with my mini pci card. Send it back to the online shop and order something fully supported ;) (without propietary microcode and such nonsens). Again. Thanks for your help! That´s why i love pfSense :) kind Regards Christian David Barbero schrieb: > Chris Buechler <[EMAIL PROTECTED]> ha escrito: > >> That's not an Atheros card. It should be supported by the iwi driver >> though, we must not have that in the pfsense kernel for some reason? >> Maybe this is why, from the iwi(4) man page: >> >> >> This driver requires firmware to be loaded before it will work. >> You need >> to install the ports/net/iwi-firmware-kmod port before ifconfig(8) >> will >> work. > > Probabily for the licence of the driver... > > In FreeBSD 6.2 this driver come with distribution, but for use it, you > need a line in /boot/loader.conf (I don't sure is in this file...). > > Regards. > > --"Linux is for people who hate Windows, BSD is for people who love UNIX" > "Social Engineer -> Because there is no patch for human stupidity" > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Maybe I'm wrong, but one of the first intel ABG cards was based on a 5212 chip, thought it was the 2915 but maybe not. Been a while since i last tried out the intel cards. -lsf On 4/19/07, David Barbero <[EMAIL PROTECTED]> wrote: Chris Buechler <[EMAIL PROTECTED]> ha escrito: > That's not an Atheros card. It should be supported by the iwi driver > though, we must not have that in the pfsense kernel for some reason? > Maybe this is why, from the iwi(4) man page: > > > This driver requires firmware to be loaded before it will work. You need > to install the ports/net/iwi-firmware-kmod port before ifconfig(8) will > work. Probabily for the licence of the driver... In FreeBSD 6.2 this driver come with distribution, but for use it, you need a line in /boot/loader.conf (I don't sure is in this file...). Regards. -- "Linux is for people who hate Windows, BSD is for people who love UNIX" "Social Engineer -> Because there is no patch for human stupidity" - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Chris Buechler <[EMAIL PROTECTED]> ha escrito: That's not an Atheros card. It should be supported by the iwi driver though, we must not have that in the pfsense kernel for some reason? Maybe this is why, from the iwi(4) man page: This driver requires firmware to be loaded before it will work. You need to install the ports/net/iwi-firmware-kmod port before ifconfig(8) will work. Probabily for the licence of the driver... In FreeBSD 6.2 this driver come with distribution, but for use it, you need a line in /boot/loader.conf (I don't sure is in this file...). Regards. -- "Linux is for people who hate Windows, BSD is for people who love UNIX" "Social Engineer -> Because there is no patch for human stupidity" - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
That's not an Atheros card. It should be supported by the iwi driver though, we must not have that in the pfsense kernel for some reason? Maybe this is why, from the iwi(4) man page: This driver requires firmware to be loaded before it will work. You need to install the ports/net/iwi-firmware-kmod port before ifconfig(8) will work. Christian Veith wrote: Hi, thanks for your quick response. I´ve attached the output of dmesg and ifconfig to this mail. the card is reported in dmesg: wlan: mac acl policy registered ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: at device 13.0 (no driver attached) ifconfig has also no output on additional interfaces (see attachment). Espen Johansen schrieb: Does dmesg report the card at all ? It's Atheros based so it should show up as ath0. Does ifconfig list it ? Please provide more info. -lsf On 4/19/07, Christian Veith <[EMAIL PROTECTED]> wrote: Hi Folks, is it possible to use the Intel Pro/Wireless 2915ABG as an access point with pfsense embedded ? i?ve just installed the card on my wrap but there are no new interfaces in the interface assignment. Everything i found on the forum was that post from 9th of April 2006: http://forum.pfsense.org/index.php/topic,977.msg5975.html#msg5975 What could i do to get it working ? kind regards Christian - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] sis0: flags=8802 mtu 1500 options=8 ether 00:0d:b9:06:5b:a0 media: Ethernet autoselect (none) status: no carrier sis1: flags=8843 mtu 1500 options=8 inet 172.16.0.1 netmask 0xfe00 broadcast 172.16.1.255 inet6 fe80::20d:b9ff:fe06:5ba1%sis1 prefixlen 64 scopeid 0x2 ether 00:0d:b9:06:5b:a1 media: Ethernet autoselect (100baseTX ) status: active sis2: flags=8843 mtu 1500 options=8 inet6 fe80::20d:b9ff:fe06:5ba2%sis2 prefixlen 64 scopeid 0x3 ether 00:0d:b9:06:5b:a2 media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 pfsync0: flags=41 mtu 2020 pfsync: syncdev: lo0 maxupd: 128 pflog0: flags=100 mtu 33208 ng0: flags=98d1 mtu 1500 inet 192.0.2.112 --> 192.0.2.113 netmask 0x inet6 fe80::20d:b9ff:fe06:5ba0%ng0 prefixlen 64 scopeid 0x7 tun0: flags=8051 mtu 1500 inet6 fe80::20d:b9ff:fe06:5ba0%tun0 prefixlen 64 scopeid 0x8 inet 192.168.254.1 --> 192.168.254.2 netmask 0x Opened by PID 346 ng1: flags=8890 mtu 1500 ng2: flags=8890 mtu 1500 ng3: flags=8890 mtu 1500 ng4: flags=8890 mtu 1500 ng5: flags=8890 mtu 1500 ng6: flags=8890 mtu 1500 ng7: flags=8890 mtu 1500 ng8: flags=8890 mtu 1500 ng9: flags=8890 mtu 1500 ng10: flags=8890 mtu 1500 ng11: flags=8890 mtu 1500 ng12: flags=8890 mtu 1500 ng13: flags=8890 mtu 1500 ng14: flags=8890 mtu 1500 ng15: flags=8890 mtu 1500 ng16: flags=8890 mtu 1500 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Geode(TM) Integrated Processor by National Semi (233.32-MHz 586-class CPU) Origin = "Geode by NSC" Id = 0x540 Stepping = 0 Features=0x808131 real memory = 134217728 (128 MB) avail memory = 121917440 (116 MB) wlan: mac acl policy registered ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: at device 13.0 (no driver attached) sis0: port 0x1000-0x10ff mem 0x8004-0x80040fff irq 10 at device 14.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: on sis0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0d:b9:06:5b:a0 sis1: port 0x1400-0x14ff mem 0x8008-0x80080fff irq 9 at device 15.0 on pci0 sis1: Silicon Revision: DP83816A miibus1: on sis1 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: Ethernet address: 00:0d:b9:06:5b:a1 sis2: port 0x1800-0x18ff mem 0x800c-0x800c0fff irq 11 at device 16.0 on pci0 sis2: Silicon Revision: DP83816A miibus2: on sis2 ukphy2: on miibus2 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: Ethernet address: 00:0d:b9:06:5b:a2 Geode GPIO@ = f400 Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005 isab0: port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 on pci0 isa0:
Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Hi, thanks for your quick response. I´ve attached the output of dmesg and ifconfig to this mail. the card is reported in dmesg: wlan: mac acl policy registered ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: at device 13.0 (no driver attached) ifconfig has also no output on additional interfaces (see attachment). Espen Johansen schrieb: > Does dmesg report the card at all ? > It's Atheros based so it should show up as ath0. > Does ifconfig list it ? > Please provide more info. > > -lsf > > On 4/19/07, Christian Veith <[EMAIL PROTECTED]> wrote: >> Hi Folks, >> >> is it possible to use the Intel Pro/Wireless 2915ABG as an access point >> with pfsense embedded ? >> >> i?ve just installed the card on my wrap but there are no new interfaces >> in the interface assignment. >> >> >> >> Everything i found on the forum was that post from 9th of April 2006: >> >> http://forum.pfsense.org/index.php/topic,977.msg5975.html#msg5975 >> >> >> >> What could i do to get it working ? >> >> >> >> kind regards >> >> Christian >> >> - >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > sis0: flags=8802 mtu 1500 options=8 ether 00:0d:b9:06:5b:a0 media: Ethernet autoselect (none) status: no carrier sis1: flags=8843 mtu 1500 options=8 inet 172.16.0.1 netmask 0xfe00 broadcast 172.16.1.255 inet6 fe80::20d:b9ff:fe06:5ba1%sis1 prefixlen 64 scopeid 0x2 ether 00:0d:b9:06:5b:a1 media: Ethernet autoselect (100baseTX ) status: active sis2: flags=8843 mtu 1500 options=8 inet6 fe80::20d:b9ff:fe06:5ba2%sis2 prefixlen 64 scopeid 0x3 ether 00:0d:b9:06:5b:a2 media: Ethernet autoselect (none) status: no carrier lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff00 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 pfsync0: flags=41 mtu 2020 pfsync: syncdev: lo0 maxupd: 128 pflog0: flags=100 mtu 33208 ng0: flags=98d1 mtu 1500 inet 192.0.2.112 --> 192.0.2.113 netmask 0x inet6 fe80::20d:b9ff:fe06:5ba0%ng0 prefixlen 64 scopeid 0x7 tun0: flags=8051 mtu 1500 inet6 fe80::20d:b9ff:fe06:5ba0%tun0 prefixlen 64 scopeid 0x8 inet 192.168.254.1 --> 192.168.254.2 netmask 0x Opened by PID 346 ng1: flags=8890 mtu 1500 ng2: flags=8890 mtu 1500 ng3: flags=8890 mtu 1500 ng4: flags=8890 mtu 1500 ng5: flags=8890 mtu 1500 ng6: flags=8890 mtu 1500 ng7: flags=8890 mtu 1500 ng8: flags=8890 mtu 1500 ng9: flags=8890 mtu 1500 ng10: flags=8890 mtu 1500 ng11: flags=8890 mtu 1500 ng12: flags=8890 mtu 1500 ng13: flags=8890 mtu 1500 ng14: flags=8890 mtu 1500 ng15: flags=8890 mtu 1500 ng16: flags=8890 mtu 1500 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Geode(TM) Integrated Processor by National Semi (233.32-MHz 586-class CPU) Origin = "Geode by NSC" Id = 0x540 Stepping = 0 Features=0x808131 real memory = 134217728 (128 MB) avail memory = 121917440 (116 MB) wlan: mac acl policy registered ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) cpu0 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: at device 13.0 (no driver attached) sis0: port 0x1000-0x10ff mem 0x8004-0x80040fff irq 10 at device 14.0 on pci0 sis0: Silicon Revision: DP83816A miibus0: on sis0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: Ethernet address: 00:0d:b9:06:5b:a0 sis1: port 0x1400-0x14ff mem 0x8008-0x80080fff irq 9 at device 15.0 on pci0 sis1: Silicon Revision: DP83816A miibus1: on sis1 ukphy1: on miibus1 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis1: Ethernet address: 00:0d:b9:06:5b:a1 sis2: port 0x1800-0x18ff mem 0x800c-0x800c0fff irq 11 at device 16.0 on pci0 sis2: Silicon Revision: DP83816A miibus2: on sis2 ukphy2: on miibus2 ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis2: Ethernet address: 00:0d:b9:06:5b:a2 Geode GPIO@ = f400 Geode PC Engines WRAP.1C/1D/1E v1.tinyBIOS V1.4a (C)1997-2005 isab0: port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 on pci0 isa0: on isab0 pci0: at device 18.1 (no driver attached) atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0 ata0: on atapci0 ata1: on atapci0 pci0: at device 18.3 (no driver attached) Geode CBA@ 0x9000 Geode rev: 06 03 Timecounter "Geode" frequency 2700 Hz quality 1000 pci0: at device 18.5 (no driver attached) orm0: at iomem 0xe-0xe7fff on isa0 ppc0: parallel port not found. sio0 at port 0x3f8-0x3ff irq 4 fl
[pfSense Support] Re: Joan Vaughan
can we ensure this person is in a router list i have ordered new routers should be here next week On Thu, 2007-04-19 at 17:05 +0100, Barry O'Donovan wrote: > Joan Vaughan called to request a service call regarding her radiowave > account. > > She was connected to radiowave yesterday morning until approx 11.30. > > Yesterday afternoon she attempted to connected but received an invalid > user/password error. > > She attempted (and her brother attempted) to re-enter her user name and > password to no avail. > > I took her through the steps of re-entering her username and password in > her pppoe dial-up dialog box and her connection is now working correctly > again. > > > Barry O'Donovan > > [EMAIL PROTECTED] > > +353657077973 > > www.radiowave.ie > - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Does dmesg report the card at all ? It's Atheros based so it should show up as ath0. Does ifconfig list it ? Please provide more info. -lsf On 4/19/07, Christian Veith <[EMAIL PROTECTED]> wrote: Hi Folks, is it possible to use the Intel Pro/Wireless 2915ABG as an access point with pfsense embedded ? i?ve just installed the card on my wrap but there are no new interfaces in the interface assignment. Everything i found on the forum was that post from 9th of April 2006: http://forum.pfsense.org/index.php/topic,977.msg5975.html#msg5975 What could i do to get it working ? kind regards Christian - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Nothing has changed regarding Intel Wireless NIC support. It's a freebsd issue, not a pfSense one. Holger -Original Message- From: Christian Veith [mailto:[EMAIL PROTECTED] Sent: Thursday, April 19, 2007 8:22 PM To: support@pfsense.com Subject: [pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG Hi Folks, is it possible to use the Intel Pro/Wireless 2915ABG as an access point with pfsense embedded ? i?ve just installed the card on my wrap but there are no new interfaces in the interface assignment. Everything i found on the forum was that post from 9th of April 2006: http://forum.pfsense.org/index.php/topic,977.msg5975.html#msg5975 What could i do to get it working ? kind regards Christian - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Virus checked by G DATA AntiVirusKit Version: AVK 17.4093 from 19.04.2007 Virus news: www.antiviruslab.com Virus checked by G DATA AntiVirusKit Version: AVK 17.4094 from 19.04.2007 Virus news: www.antiviruslab.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Get WLAN Working with Intel Pro/Wireless 2915ABG
Hi Folks, is it possible to use the Intel Pro/Wireless 2915ABG as an access point with pfsense embedded ? i?ve just installed the card on my wrap but there are no new interfaces in the interface assignment. Everything i found on the forum was that post from 9th of April 2006: http://forum.pfsense.org/index.php/topic,977.msg5975.html#msg5975 What could i do to get it working ? kind regards Christian - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Load Balancer Behaviour?
On 4/19/07, Quirino Santilli <[EMAIL PROTECTED]> wrote: I was finally configuring pfSense as a multi-wan / load-balancing / fail-over firewall for my company when i found something strange. Looking at the howto at this address http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing i found that the load-balancer had a "behaviour" field that in my 1.0.1 installation is not available. To make you believe I'm not fooling, you can find attached the interface that comes out in my installation and the one available on the howto. Can you tell me why? Upgrade to a recent snapshot. http://snapshots.pfsense.com/FreeBSD6/RELENG_1/ Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] Error running mkflash_new.sh
On Thu, 19 Apr 2007 17:19:59 +0200, Josep Pujadas i Jubany wrote > Hello! > > I'v got an error running mkflash_new.sh on FreeBSD 6.2 (mounting > md0a and md0d): > > # ./mkflash_new.sh 256 pfSense.img.gz I'm very sorry! It's my fault I forgot to gunzip the file before using the script. It must be: ./mkflash_new.sh 256 pfSense.img Regards, Josep Pujadas - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Error running mkflash_new.sh
Hello! I'v got an error running mkflash_new.sh on FreeBSD 6.2 (mounting md0a and md0d): # ./mkflash_new.sh 256 pfSense.img.gz abr 19 17:16:32: Creating 256MB Compact Flash abr 19 17:16:32: And using pfSense.img.gz as source image. abr 19 17:16:32: abr 19 17:16:32:Real flash size: 222 MB abr 19 17:16:32:root size: 218, root blocks: 446464 abr 19 17:16:32:conf size: 4, conf blocks: 8192 446464 abr 19 17:16:32:cylinders: 888, heads: 16, sectors: 32 abr 19 17:16:32: abr 19 17:16:32: Creating empty 256MB flash image in /usr/home/super/pfsense abr 19 17:16:45: abr 19 17:16:45: Preparing Filesystems on /usr/home/super/pfsense/pfSense- 256MB.img abr 19 17:16:45:Bsdlabel abr 19 17:16:45:Newfs abr 19 17:16:45: abr 19 17:16:45: Extracting content from pfSense.img.gz mount: /dev/md0a: No such file or directory mount: /dev/md0d: No such file or directory abr 19 17:16:45:-> /usr/home/super/pfsense/pfSense-slash.tar.bz2 abr 19 17:16:45:-> /usr/home/super/pfsense/pfSense-conf.tar.bz2 umount: /dev/md0a: statfs: No such file or directory umount: /dev/md0a: unknown file system umount: /dev/md0d: statfs: No such file or directory umount: /dev/md0d: unknown file system abr 19 17:16:46: abr 19 17:16:46: Restoring content to /usr/home/super/pfsense/pfSense- 256MB.img abr 19 17:16:46:<- /usr/home/super/pfsense/pfSense-slash.tar.bz2 abr 19 17:16:46:<- /usr/home/super/pfsense/pfSense-conf.tar.bz2 abr 19 17:16:47:Cleanig up. abr 19 17:16:47: abr 19 17:16:47: Compressing /usr/home/super/pfsense/pfSense-256MB.img abr 19 17:17:04:Creating MD5 hash abr 19 17:17:04: abr 19 17:17:04: READY! Now you have a 256MB pfSense image. abr 19 17:17:04: You can get this image on your CF Card using: abr 19 17:17:04: zcat /usr/home/super/pfsense/pfSense-256MB.img.gz | dd of=/dev/da0 bs=16k Thanks in advance, Josep Pujadas - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] webConfigurator failed to start
Ok Bill -Original Message- From: Bill Marquette [mailto:[EMAIL PROTECTED] Sent: Thursday, April 19, 2007 9:04 PM To: support@pfsense.com Subject: Re: [pfSense Support] webConfigurator failed to start On 4/19/07, Kelvin Chiang <[EMAIL PROTECTED]> wrote: > > > Hi, my webConfigurator failed to start after a new installation (newly > compiled binary). The error messages found in the system log are: > > Error: cannot determine root pwd in sync_webgui_passwords(). Root user > struct follows: Unable to determine root user! > Testing whether your system has the necessary users > users are missing > > I am not sure whether these made the webConfigurator to fail but these > are the only suspicious messages. please see my email about releng_1 being somewhat unstable right now. also, see the many emails on "roll your own, you're on your own". I'd expect that anyone running their own builds is following the CVS tree and is planning on actually submitting patches for the bugs they find. --Bill - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] webConfigurator failed to start
On 4/19/07, Bill Marquette <[EMAIL PROTECTED]> wrote: please see my email about releng_1 being somewhat unstable right now. also, see the many emails on "roll your own, you're on your own". I'd expect that anyone running their own builds is following the CVS tree and is planning on actually submitting patches for the bugs they find. Also, we haven't released a snapshot with that code in it, so I'm not actually expecting any bug reports on it as of yet. --Bill - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] webConfigurator failed to start
On 4/19/07, Kelvin Chiang <[EMAIL PROTECTED]> wrote: Hi, my webConfigurator failed to start after a new installation (newly compiled binary). The error messages found in the system log are: Error: cannot determine root pwd in sync_webgui_passwords(). Root user struct follows: Unable to determine root user! Testing whether your system has the necessary users users are missing I am not sure whether these made the webConfigurator to fail but these are the only suspicious messages. please see my email about releng_1 being somewhat unstable right now. also, see the many emails on "roll your own, you're on your own". I'd expect that anyone running their own builds is following the CVS tree and is planning on actually submitting patches for the bugs they find. --Bill - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] webConfigurator failed to start
Hi, my webConfigurator failed to start after a new installation (newly compiled binary). The error messages found in the system log are: Error: cannot determine root pwd in sync_webgui_passwords(). Root user struct follows: Unable to determine root user! Testing whether your system has the necessary users users are missing I am not sure whether these made the webConfigurator to fail but these are the only suspicious messages. Regards, Kelvin
Re: [pfSense Support] Ways to measure usage
I don't need perfect accuracy. My intention is to have an "early warning system" that my usage is getting close to the max. An error margin of 10% will be fine, and from your figures, the error is well within this range. Thanks, Jon Wanak - Original Message From: Holger Bauer <[EMAIL PROTECTED]> To: support@pfsense.com Sent: Thursday, April 19, 2007 1:25:46 AM Subject: RE: [pfSense Support] Ways to measure usage The older the data the more it is "rounded". This happens as the database of the RRD graphs is not growing out of size but is using some roundrobin logic to store the additional information. This way it even works on embeddeds with limited storage for long uptimes without filling the cfmedia up. Holger > -Original Message- > From: Ryan Wagoner [mailto:[EMAIL PROTECTED] > Sent: Thursday, April 19, 2007 5:02 AM > To: support@pfsense.com > Subject: RE: [pfSense Support] Ways to measure usage > > The RRD graphs aren't all that accurate. Looking at mine the > 1 month graph shows 6.52GB in and the 6 month graph shows > less usage at 6.48GB in. Not sure why this happens, but its > repeatable. Happens more when you transfer large amounts of > data quickly. I'll notice the 16 hour graph won't sure near > that amount of transferred data that the 4 hour graph shows. > > -Original Message- > From: Jonathan Wanak [mailto:[EMAIL PROTECTED] > Sent: Wednesday, April 18, 2007 10:37 PM > To: support@pfsense.com > Subject: [pfSense Support] Ways to measure usage > > Hi everyone, > > My satellite provider has bandwidth usage restrictions. As I > understand, I'm limited to 30 gigabits total up and down > usage per 30 day period. According to my provider, I > recently hit this restriction, but my WAN RRD graphs don't > agree with the provider's figures. My knowledge of RRDTool > is rudimentary at best. So, I'm looking for suggestions on > how to accomplish 2 things: > > 1. I'd like to access/view the raw data that the RRD graphs > are based on. So far, the best way I found was to run the > command "rrdtool dump /var/db/rrd/wan-traffic.rrd", then look > for the appropriate section of the XML output. Is there a > better way to get the info I'm looking for? > > 2. If possible, I'd like to create an RRD graph that can > display how much data I have transferred over the past 30 > days. Is this possible? > > Thanks, > > Jon Wanak > > __ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection > around http://mail.yahoo.com > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] > > > - > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] > > > Virus checked by G DATA AntiVirusKit > Version: AVK 17.4082 from 19.04.2007 > Virus news: www.antiviruslab.com > > > > Virus checked by G DATA AntiVirusKit Version: AVK 17.4082 from 19.04.2007 Virus news: www.antiviruslab.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] Help Me Plz
I think your memory died, just replace the memory -Original Message- From: Mohd Saidy Bin Mohd Yusof [mailto:[EMAIL PROTECTED] Sent: Monday, January 15, 2007 4:32 PM To: support@pfsense.com Subject: [pfSense Support] Help Me Plz I'm using server with 1000MB RAM but after a few month i got msg "acknowledge all, [pfsense memory requirements]. Pfsense requires at least 128MB RAM. Expected unusual performance. This platform is not supported." It make my server performances very slow. How to solve its. FYI, im using captive portal for auth. wireless. Make log read 50. So, what should i tweak get batter performances? Its is because of i thik to "Use device polling" or untick/tick to "Disable writing log files to the local ram disk" Please help me. MOHD SAIDY BIN MOHD YUSOF Mobile: +6.019.266.1273 Office : +6.03.8924.1282 Fax: +6.03.8926.5381
Re: [pfSense Support] Changing from ad0 to ad2
Hello Josep, I would write the img-file to flash, start and just load up the config (which you downloaded before) otherwise you have to change ad0 to ad2 in /etc/fstab Tom Müko Am 19.04.2007 um 10:21 schrieb Josep Pujadas i Jubany: Hello! I want to migrate my pfSense embedded to recent snapshot: http://snapshots.pfsense.org/FreeBSD6/RELENG_1/embedded/ I followed instructions to resize embedded flash image: http://wiki.pfsense.org/wikka.php?wakka=FlashHowToSkript Question: If my pfSense box sees the CF as ad2 instead of ad0 how can I change it ? Thanks, Josep Pujadas - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- kommunity GmbH & Co.KG Goseriede 4, D-30159 Hannover Phone +49 (0)5 11 - 80 72 58 - 0 Fax +49 (0)5 11 - 80 72 58 - 10 Sitz der Gesellschaft: Hannover, Registergericht: Amtsgericht Hannover, Handelsregisternummer HRA 26721 Persönlich haftende Gesellschafterin: kommunity Verwaltungsgesellschaft mbH vertreten durch den Geschäftsführer Tom Müller-Kortkamp Sitz der Gesellschaft: Hannover, Registergericht: Amtsgericht Hannover, Registernummer HRB 60200 - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[pfSense Support] Changing from ad0 to ad2
Hello! I want to migrate my pfSense embedded to recent snapshot: http://snapshots.pfsense.org/FreeBSD6/RELENG_1/embedded/ I followed instructions to resize embedded flash image: http://wiki.pfsense.org/wikka.php?wakka=FlashHowToSkript Question: If my pfSense box sees the CF as ad2 instead of ad0 how can I change it ? Thanks, Josep Pujadas - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
