Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?-Original Message- From: Sean Cavanaugh Sent: Wednesday, December 22, 2010 7:39 PM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? ?that helped out a lot. now I at the point of where it is fully set up but I cannot seem to get any response from the DHCPv6 server. I am installing wireshark on another comp to make sure my desktop is even sending out the requests. Verified with wireshark that the DHCPv6 requests are going out but I am not seeing any response from pfsense for them. DHCP Log shows (blanked out part of address): Dec 23 07:18:36 dhcpd: Listening on Socket/14/em1/2001:470:7:XXXx::/64 Dec 23 07:18:36 dhcpd: Sending on Socket/14/em1/2001:470:7:::/64 and no other DHCPv6 entries em1 is my LAN connection - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
Hi Sean, Op 23-12-2010 14:01, Sean Cavanaugh schreef: ?-Original Message- From: Sean Cavanaugh Sent: Wednesday, December 22, 2010 7:39 PM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? Verified with wireshark that the DHCPv6 requests are going out but I am not seeing any response from pfsense for them. DHCP Log shows (blanked out part of address): Dec 23 07:18:36 dhcpd: Listening on Socket/14/em1/2001:470:7:XXXx::/64 Dec 23 07:18:36 dhcpd: Sending on Socket/14/em1/2001:470:7:::/64 Thanks for helping out with this, I've had a heck of a time troubleshooting this in my test setup and had been unable to verify it's operation. I do have rtadvd configured to tell the hosts to use managed e.g. dhcp for ipv6 configuration, but it always falls back to autoconfig. and no other DHCPv6 entries I think I need to add other firewall rules for traffic to leave the pfsense box, specifically for dhcp v6. I am not sure what rules I exactly need for that. What I have not tried yet is disabling pf using pf -d. Maybe that dhcp succeeds without pf in between. I think that dhcp v6 uses port 567 but I'm unsure. Your help in troubleshooting is greatly appreciated. Regards, Seth - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?-Original Message- From: Seth Mos Sent: Thursday, December 23, 2010 8:13 AM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? Hi Sean, Op 23-12-2010 14:01, Sean Cavanaugh schreef: ?-Original Message- From: Sean Cavanaugh Sent: Wednesday, December 22, 2010 7:39 PM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? Verified with wireshark that the DHCPv6 requests are going out but I am not seeing any response from pfsense for them. DHCP Log shows (blanked out part of address): Dec 23 07:18:36 dhcpd: Listening on Socket/14/em1/2001:470:7:XXXx::/64 Dec 23 07:18:36 dhcpd: Sending on Socket/14/em1/2001:470:7:::/64 Thanks for helping out with this, I've had a heck of a time troubleshooting this in my test setup and had been unable to verify it's operation. I do have rtadvd configured to tell the hosts to use managed e.g. dhcp for ipv6 configuration, but it always falls back to autoconfig. and no other DHCPv6 entries I think I need to add other firewall rules for traffic to leave the pfsense box, specifically for dhcp v6. I am not sure what rules I exactly need for that. What I have not tried yet is disabling pf using pf -d. Maybe that dhcp succeeds without pf in between. I think that dhcp v6 uses port 567 but I'm unsure. Your help in troubleshooting is greatly appreciated. Regards, Seth -- -- I did realize that by default there is a LAN rule to allow all IPv4 out. I created an equivalent IPv6 rule and BAM I got DHCP to work. now I am just verifying the rest of the setup. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?Update:: I have IPv6 successfully running up to the pfsense box and I can ping out as far as the Server IPv6 address but cannot get anything beyond that. Destination Net Unreachable I will dig deeper into it this afternoon . - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
Op 21-12-2010 22:50, Sean Cavanaugh schreef: ?ok. I got past the gitsync by hitting enter and letting it actually continue. now after the sync I get the nice error Parse error: syntax error, unexpected T_SL in /etc/inc/vslb.inc on line 291 Oops my bad. I merged up with the current 2.0 code and I butched the merge. Fixed. this shows up in both console mode and in the web interface as well as shuts down all firewall services. I also noticed that lighty and apinger are still the wrong versions and don't include ipv6. To replace lighty and apinger. cd /usr/local/sbin fetch http://iserv.nl/files/pfsense/apinger fetch http://iserv.nl/files/pfsense/lighttpd cd /usr/local/lib/lighttpd fetch http://iserv.nl/files/pfsense/lighty.so.tgz tar -xzf lighty.so.tgz restart webconfigurator using option 11. Regards, Seth - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?that helped out a lot. now I at the point of where it is fully set up but I cannot seem to get any response from the DHCPv6 server. I am installing wireshark on another comp to make sure my desktop is even sending out the requests. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
Op 21-12-2010 1:52, Sean Cavanaugh schreef: after that, it asks if I want to sync with master which doesn’t do anything. It says press enter if done. Press enter. ;-) The procedure for entering custom urls is that you enter it the 1st time, accept and then press enter to signal it to start. After that it should promptly start syncing. Regards, Seth - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?ok. I got past the gitsync by hitting enter and letting it actually continue. now after the sync I get the nice error Parse error: syntax error, unexpected T_SL in /etc/inc/vslb.inc on line 291 this shows up in both console mode and in the web interface as well as shuts down all firewall services. completed on snapshot of 2.0-BETA4 from yesterday - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
RE: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
IPv6 support does not get in pfSense till v2.1 pfSense itself does not offer support (yet), the underlying OS (FreeBSD 7.2 in my case) does :) - I managed to get an IPv6 tunnel working in pfSense 1.2.3, while the clients hooked up to my network can use that tunnel. Bart -Oorspronkelijk bericht- Van: Xavier Beaudouin [mailto:k...@oav.net] Verzonden: maandag 20 december 2010 18:45 Aan: support Onderwerp: [pfSense Support] pfSense 2.0 BETA4 : IPv6? Hi there, I have update my gateway from m0n0wall to pfSense 2.0 BETA4 to make a better and faster gateway (moved from a wrap to a amd 4020e)... But I have saw that Beta 2.0 should have IPv6 support but no luck I didn't found it... Cheers and happy xmas. Xavier - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org __ NOD32 5718 (20101220) Informatie __ Dit bericht is gecontroleerd door het NOD32 Antivirus Systeem. http://www.nod32.nl - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
There is a post in the forum, to my git branch and instructions for support on 2.0 BETA http://iserv.nl/files/pfsense/ipv6/ I'm currently using it in production on a carp cluster and appears to work fine for basic firewalling. Regards, Seth Op 20 dec 2010, om 20:19 heeft Bart Grefte het volgende geschreven: IPv6 support does not get in pfSense till v2.1 pfSense itself does not offer support (yet), the underlying OS (FreeBSD 7.2 in my case) does :) - I managed to get an IPv6 tunnel working in pfSense 1.2.3, while the clients hooked up to my network can use that tunnel. Bart -Oorspronkelijk bericht- Van: Xavier Beaudouin [mailto:k...@oav.net] Verzonden: maandag 20 december 2010 18:45 Aan: support Onderwerp: [pfSense Support] pfSense 2.0 BETA4 : IPv6? Hi there, I have update my gateway from m0n0wall to pfSense 2.0 BETA4 to make a better and faster gateway (moved from a wrap to a amd 4020e)... But I have saw that Beta 2.0 should have IPv6 support but no luck I didn't found it... Cheers and happy xmas. Xavier - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org __ NOD32 5718 (20101220) Informatie __ Dit bericht is gecontroleerd door het NOD32 Antivirus Systeem. http://www.nod32.nl - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
?-Original Message- From: Seth Mos Sent: Monday, December 20, 2010 2:37 PM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? There is a post in the forum, to my git branch and instructions for support on 2.0 BETA http://iserv.nl/files/pfsense/ipv6/ following these instructions, I am unable to download the .git file to start the sync. Current repository is http://gitweb.pfsense.org/pfsense/mainline.git Please select which branch you would like to sync against: master 2.0 development branch RELENG_1_2 1.2* release branch build_commit The commit originally used to build the image Or alternatively you may enter a custom RCS branch URL (HTTP). http://gitweb.pfsense.org/pfsense/pfSense-smos.git NOTE: http://gitweb.pfsense.org/pfsense/pfSense-smos.git was not found. Is this a custom GIT URL? [y]? --- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
On Mon, Dec 20, 2010 at 6:53 PM, Sean Cavanaugh millenia2...@hotmail.com wrote: ?-Original Message- From: Seth Mos Sent: Monday, December 20, 2010 2:37 PM To: support@pfsense.com Subject: Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6? There is a post in the forum, to my git branch and instructions for support on 2.0 BETA http://iserv.nl/files/pfsense/ipv6/ following these instructions, I am unable to download the .git file to start the sync. Current repository is http://gitweb.pfsense.org/pfsense/mainline.git Please select which branch you would like to sync against: master 2.0 development branch RELENG_1_2 1.2* release branch build_commit The commit originally used to build the image Or alternatively you may enter a custom RCS branch URL (HTTP). http://gitweb.pfsense.org/pfsense/pfSense-smos.git NOTE: http://gitweb.pfsense.org/pfsense/pfSense-smos.git was not found. Is this a custom GIT URL? [y]? That's just telling you it's not one of the official URLs, just tell it yes. - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org
Re: [pfSense Support] pfSense 2.0 BETA4 : IPv6?
That's just telling you it's not one of the official URLs, just tell it yes. after that, it asks if I want to sync with master which doesn’t do anything. - Or alternatively you may enter a custom RCS branch URL (HTTP). http://gitweb.pfsense.org/pfsense/pfSense-smos.git NOTE: http://gitweb.pfsense.org/pfsense/pfSense-smos.git was not found. Is this a custom GIT URL? [y]? y Checkout which branch [master]? Add a custom RCS branch URL (HTTP) to merge in or press enter if done. -- - To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org