Re: [Tutor] Wading through traceback output :p:
On Mon, 26 Dec 2011 07:10:45 -0500 Alan Gauld alan.ga...@btinternet.com wrote: On 26/12/11 11:42, Thomas C. Hicks wrote: Given it was working before and not now the obvious question is what has changed? It looks like you are on a Linux box so do you have automatic updates switched on? Or do you always just accept the recommendation to update? In which case try looking at the modification dates of the library files Also has the verion of Excel used to create the files changed? It looks like the point that the program leaves your code is here: File ./cttOverviewMain.0.03.2011.py, line 183, in writeMonthlyHeader sh.write(7,10,# Locations,xlwt.easyxf('font: bold True')) So that points the finger at the xlwt module. If it has been updated has the format of that call changed - to a dictionary/tuple of values for example? These are all guesses but might give you a starting point. Incidentally cttOverviewMain.0.03.2011.py seems like a bizarre name for a file? I assume that's the date or somesuch? What is the thinking behind that? Thanks so much for the input Alan, guesses on your part are far better than the ignorance on my part. I do get automatic updates (though xlwt is not part of that, OpenOffice and its xls writing is), will have to look at that. Also appreciate the thoughts about the file name. This is my first big project and I still have much to learn. If you can point me to a discussion of file naming when there are multiple files involved in a project I am game to do some reading! thomas ___ Tutor maillist - Tutor@python.org To unsubscribe or change subscription options: http://mail.python.org/mailman/listinfo/tutor
Re: [Tutor] Wading through traceback output :p:
On 12/26/2011 11:52 PM, Thomas C. Hicks wrote: On Mon, 26 Dec 2011 07:10:45 -0500 Alan Gauldalan.ga...@btinternet.com wrote: On 26/12/11 11:42, Thomas C. Hicks wrote: Given it was working before and not now the obvious question is what has changed? It looks like you are on a Linux box so do you have automatic updates switched on? Or do you always just accept the recommendation to update? In which case try looking at the modification dates of the library files Also has the verion of Excel used to create the files changed? It looks like the point that the program leaves your code is here: File ./cttOverviewMain.0.03.2011.py, line 183, in writeMonthlyHeader sh.write(7,10,# Locations,xlwt.easyxf('font: bold True')) So that points the finger at the xlwt module. If it has been updated has the format of that call changed - to a dictionary/tuple of values for example? These are all guesses but might give you a starting point. Incidentally cttOverviewMain.0.03.2011.py seems like a bizarre name for a file? I assume that's the date or somesuch? What is the thinking behind that? Thanks so much for the input Alan, guesses on your part are far better than the ignorance on my part. I do get automatic updates (though xlwt is not part of that, OpenOffice and its xls writing is), will have to look at that. Many package managers keeps a history of what packages are installed/updated/removed. You might want to use those to find if OpenOffice or some other libraries had been updated since the last time the script worked. Also appreciate the thoughts about the file name. This is my first big project and I still have much to learn. If you can point me to a discussion of file naming when there are multiple files involved in a project I am game to do some reading! Use version control, it will relieve you of versioning headache. Nowadays it's pretty easy to setup a DVCS like mercurial or git even for small projects. ___ Tutor maillist - Tutor@python.org To unsubscribe or change subscription options: http://mail.python.org/mailman/listinfo/tutor
Re: [Tutor] Wading through traceback output :p:
On 26/12/11 12:52, Thomas C. Hicks wrote: Also appreciate the thoughts about the file name. This is my first big project and I still have much to learn. If you can point me to a discussion of file naming when there are multiple files involved in a project I am game to do some reading! When dealing with multiple files the only p[roblem tends to e if you have duplicate names. In that case create separate folders (packages in Python) and use namespaces to kep them separate. If you have multiple versions of the same file it's probably better to keep separate folders for each project version. But better still is to use a version control tool (which does the same thing virtually with a friendly UI/CLI and copes with multiple versions etc). These can range from simple file based RCS to full project based control. Most folks these days tenmd to go with project based control. CVS, SVN. GIT, Mercurial are the big names for freeware. [MS SourceSafe, IBM ClearCase and AidedeCamp are the big commercial players - but they cost big bucks(apart from SourceSafe)] SVN and Mercurial would be my suggestion, GUI front ends exist for both and both have packages for most Linux distros. They both have web sites with tutorials, but whiole there are oodles of options etc there are only a few commands you need for normal use, especially for a single user: create, check out, check in, fork, diff, merge should cover it. -- Alan G Author of the Learn to Program web site http://www.alan-g.me.uk/ ___ Tutor maillist - Tutor@python.org To unsubscribe or change subscription options: http://mail.python.org/mailman/listinfo/tutor
Re: [Tutor] Wading through traceback output :p:
On Mon, Dec 26, 2011 at 12:04 PM, Alan Gauld alan.ga...@btinternet.com wrote: On 26/12/11 12:52, Thomas C. Hicks wrote: Also appreciate the thoughts about the file name. This is my first big project and I still have much to learn. If you can point me to a discussion of file naming when there are multiple files involved in a project I am game to do some reading! When dealing with multiple files the only p[roblem tends to e if you have duplicate names. In that case create separate folders (packages in Python) and use namespaces to kep them separate. If you have multiple versions of the same file it's probably better to keep separate folders for each project version. But better still is to use a version control tool (which does the same thing virtually with a friendly UI/CLI and copes with multiple versions etc). These can range from simple file based RCS to full project based control. Most folks these days tenmd to go with project based control. CVS, SVN. GIT, Mercurial are the big names for freeware. [MS SourceSafe, IBM ClearCase and AidedeCamp are the big commercial players - but they cost big bucks(apart from SourceSafe)] SVN and Mercurial would be my suggestion, GUI front ends exist for both and both have packages for most Linux distros. They both have web sites with tutorials, but whiole there are oodles of options etc there are only a few commands you need for normal use, especially for a single user: create, check out, check in, fork, diff, merge should cover it. -- Alan G Author of the Learn to Program web site http://www.alan-g.me.uk/ ___ Tutor maillist - Tutor@python.org To unsubscribe or change subscription options: http://mail.python.org/mailman/listinfo/tutor I sent this earlier but it doesn't look like it went through: It may be that there is something different about your data with this recent run. I googled your error message and came up with this link: http://groups.google.com/group/python-excel/browse_thread/thread/c717ad00c7acc848 I'm not familiar with the package, but ValueError: More than 4094 XFs (styles) has lots of links on google. To test my guess, would it be possible for you to set up your application to run it on files that it successfully worked on before? If it won't work on them, then I'd guess that a module may have updated. But if it does work, then you may have some condition in your new data that exercises your program in a way it hasn't be exercised before that raises the exception. The link I showed contains this little snippet: - On 27/09/2010 00:46, Keyton Weissinger wrote: if current_value_is_date: s = XFStyle() s.num_format_str = 'M/D/YY' export_sheet.write(row_idx, col_idx, current_value, s) ...and we have a winner. Create the style *once* in your outermost part of the function and re-used it, rather than creating a new style each and every time you write a date cell... - I don't know if this situation applies to you, but maybe it will give you a clue -- Joel Goldstick ___ Tutor maillist - Tutor@python.org To unsubscribe or change subscription options: http://mail.python.org/mailman/listinfo/tutor