[Ubnt_users] Merry Christmas fix
Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Does Nanobeam AC have DFS?
Need to upgrade a link, see these are in stock now, are they still 5.8ghz only? I'll need to check if I can free up 5.8ghz space if so. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Does Nanobeam AC have DFS?
No. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Chris Fabien ch...@lakenetmi.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 10:07:54 AM Subject: [Ubnt_users] Does Nanobeam AC have DFS? Need to upgrade a link, see these are in stock now, are they still 5.8ghz only? I'll need to check if I can free up 5.8ghz space if so. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Does Nanobeam AC have DFS?
Yes, 5.8 only. On Dec 25, 2014 10:08 AM, Chris Fabien ch...@lakenetmi.com wrote: Need to upgrade a link, see these are in stock now, are they still 5.8ghz only? I'll need to check if I can free up 5.8ghz space if so. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 10:36:37 AM Subject: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
You have to take a real class just to register?? On Dec 25, 2014 11:20 AM, Mike Hammett wispaubntus...@ics-il.net wrote: Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Thursday, December 25, 2014 10:36:37 AM *Subject: *[Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
We're just making this up because the NanoBeam DFS status page changed to the exam page. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Adair Winter ada...@amarillowireless.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:26:17 AM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet You have to take a real class just to register?? On Dec 25, 2014 11:20 AM, Mike Hammett wispaubntus...@ics-il.net wrote: Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 10:36:37 AM Subject: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
They took out the sub domain I think. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 25, 2014 12:27 PM, Mike Hammett wispaubntus...@ics-il.net wrote: We're just making this up because the NanoBeam DFS status page changed to the exam page. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Adair Winter ada...@amarillowireless.net *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Thursday, December 25, 2014 11:26:17 AM *Subject: *Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS ApprovedYet You have to take a real class just to register?? On Dec 25, 2014 11:20 AM, Mike Hammett wispaubntus...@ics-il.net wrote: Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com https://www.facebook.com/ICSIL https://plus.google.com/+IntelligentComputingSolutionsDeKalb https://www.linkedin.com/company/intelligent-computing-solutions https://twitter.com/ICSIL -- *From: *Josh Luthman j...@imaginenetworksllc.com *To: *Ubiquiti Users Group ubnt_users@wispa.org *Sent: *Thursday, December 25, 2014 10:36:37 AM *Subject: *[Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
Probably. The joke was over, but not funny in that it's still not done. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:52:36 AM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet They took out the sub domain I think. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 25, 2014 12:27 PM, Mike Hammett wispaubntus...@ics-il.net wrote: We're just making this up because the NanoBeam DFS status page changed to the exam page. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Adair Winter ada...@amarillowireless.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:26:17 AM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet You have to take a real class just to register?? On Dec 25, 2014 11:20 AM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 10:36:37 AM Subject: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - From: Clay Stewart To: Ubiquiti Users Group Sent: Thursday, December 25, 2014 8:02 AM Subject: [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet
Like... smells funny? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: Adair Winter ada...@amarillowireless.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 12:23:27 PM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet Ubnt have funny ways On Dec 25, 2014 11:57 AM, Mike Hammett wispaubntus...@ics-il.net wrote: Probably. The joke was over, but not funny in that it's still not done. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:52:36 AM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet They took out the sub domain I think. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Dec 25, 2014 12:27 PM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote We're just making this up because the NanoBeam DFS status page changed to the exam page. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Adair Winter ada...@amarillowireless.net To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:26:17 AM Subject: Re: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet You have to take a real class just to register?? On Dec 25, 2014 11:20 AM, Mike Hammett wispaubntus...@ics-il.net wrote: blockquote Yeah, I got that too. I like the logging of it. If you want DFS on a NanoBeam, apparently you're supposed to take an exam first? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com From: Josh Luthman j...@imaginenetworksllc.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 10:36:37 AM Subject: [Ubnt_users] Fwd: ChangeDetection: Are NanoBeams DFS Approved Yet So they gave up on DFS? :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 -- Forwarded message -- From: ro...@alert.changedetection.com Date: Dec 25, 2014 11:34 AM Subject: ChangeDetection: Are NanoBeams DFS Approved Yet To: j...@imaginenetworksllc.com Cc: Note: Do not reply to this email! This message was automatically generated by your ChangeDetection system. For help or to contact a human, see the information at the very end of this email. Thanks! __ At your request we are sending you this alert to let you know that a page you have been monitoring has changed. The following monitored page has changed: http://arenanobeamsdfsapprovedyet.ubnt.com To see the details of the change, please click on the link below: http://www.changedetection.com/log/ubnt/arenanobeamsdfsapprovedyet/index_log.html To stop monitoring this page, or change your settings, log-in to your ChangeDetection account at: http://www.changedetection.com/login.html To stop monitoring this page: http://www.changedetection.com/u?d=4fsidrft0olscbna9u436h3504 - ChangeDetection Help Contact Information - FAQ: http://www.changedetection.com/faq.html Contact: http://www.changedetection.com/contact.html --- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users /blockquote ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
Go DC. No more resets. On Thursday, December 25, 2014, Kees H wi...@calbroadband.com wrote: Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - *From:* Clay Stewart javascript:_e(%7B%7D,'cvml','cstew...@stewartcomputerservices.com'); *To:* Ubiquiti Users Group javascript:_e(%7B%7D,'cvml','ubnt_users@wispa.org'); *Sent:* Thursday, December 25, 2014 8:02 AM *Subject:* [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com javascript:_e(%7B%7D,'cvml','sa...@scsbroadband.com'); Please send service/repair requests to supp...@scsbroadband.com javascript:_e(%7B%7D,'cvml','supp...@scsbroadband.com'); -- ___ Ubnt_users mailing list Ubnt_users@wispa.org javascript:_e(%7B%7D,'cvml','Ubnt_users@wispa.org'); http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
As they say Murphy was an optimist ! Murphy's law states that for every N+ redundancy you build, you can expect N+1 set of failures. Putting a UPS is a great idea, however, we have also experienced outages due to UPS Failure (not un-common that UPS's fail in the OFF position, but it still happens) If it is a critical site, it is best to try to setup dual sources of power.. one on battery and one on main(s).. using a Dual / Redundant Power Strip (Switch)... would also make it easier to replace the UPS without bringing stuff down.. :) Faisal Imtiaz Snappy Internet Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net - Original Message - From: Kees H wi...@calbroadband.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 1:15:27 PM Subject: Re: [Ubnt_users] Merry Christmas fix Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - From: Clay Stewart To: Ubiquiti Users Group Sent: Thursday, December 25, 2014 8:02 AM Subject: [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
Every tower has UPS and every radio 2 surges and emt double shield cable. Radio was connected to mid span DL and MT ... Along with 8 other radios Not sure why it factory reset... But there was a 9 hour power outage and surges during restoration is not uncommon here. On Thursday, December 25, 2014, Kees H wi...@calbroadband.com wrote: Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - *From:* Clay Stewart javascript:_e(%7B%7D,'cvml','cstew...@stewartcomputerservices.com'); *To:* Ubiquiti Users Group javascript:_e(%7B%7D,'cvml','ubnt_users@wispa.org'); *Sent:* Thursday, December 25, 2014 8:02 AM *Subject:* [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com javascript:_e(%7B%7D,'cvml','sa...@scsbroadband.com'); Please send service/repair requests to supp...@scsbroadband.com javascript:_e(%7B%7D,'cvml','supp...@scsbroadband.com'); -- ___ Ubnt_users mailing list Ubnt_users@wispa.org javascript:_e(%7B%7D,'cvml','Ubnt_users@wispa.org'); http://lists.wispa.org/mailman/listinfo/ubnt_users -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
Tower is fully DC... Powered 450' from AC unit/ups. On Thursday, December 25, 2014, Elton Wilson el...@alohabroadband.net wrote: Go DC. No more resets. On Thursday, December 25, 2014, Kees H wi...@calbroadband.com javascript:_e(%7B%7D,'cvml','wi...@calbroadband.com'); wrote: Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - *From:* Clay Stewart *To:* Ubiquiti Users Group *Sent:* Thursday, December 25, 2014 8:02 AM *Subject:* [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Merry Christmas fix
I had just removed a large battery pack there, after figuring out you cannot connect a battery pack to a DL... DLs only switch when AC goes out... That DL is mid span Powered only by DC. I suppose a battery isolated/diode would work. On Thursday, December 25, 2014, Clay Stewart cstew...@stewartcomputerservices.com wrote: Tower is fully DC... Powered 450' from AC unit/ups. On Thursday, December 25, 2014, Elton Wilson el...@alohabroadband.net javascript:_e(%7B%7D,'cvml','el...@alohabroadband.net'); wrote: Go DC. No more resets. On Thursday, December 25, 2014, Kees H wi...@calbroadband.com wrote: Preventive Checklist # 1 Install UPS at all tower locations ? Merry Christmas Clay. - Original Message - *From:* Clay Stewart *To:* Ubiquiti Users Group *Sent:* Thursday, December 25, 2014 8:02 AM *Subject:* [Ubnt_users] Merry Christmas fix Fix checklist #1,993 Issue: Tower down due to reset Rocket after a short regional power outage Christmas morning. Solution: Factory Reset Master PtP Rocket... Change to AP, change channel to what it was, set mileage. Change IP to what it was... Leave everything else as is... SSID UBNT, CW 40, etc... save settings and it will reconnect to factory reset Rocket downstream. Then just program everything back like it was (or restore from AC2 backup). Note, you will need subnet access to 192.168.1.x via computer and routers. No go and call back the three dozen angry people who called in on Christmas morning. Lucked out that the 40 CW still let me connect, although dur no the fix it knocked down couple other backhauls. Be nice if Ubiquiti would have factory default of 10. Now off to fix a factory reset router, which I will do by routing to 192.168.10.1, remotely, and then reprogram. (Need to turn all those factory reset buttons off!) -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com -- ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com javascript:_e(%7B%7D,'cvml','sa...@scsbroadband.com'); Please send service/repair requests to supp...@scsbroadband.com javascript:_e(%7B%7D,'cvml','supp...@scsbroadband.com'); -- -- Clay Stewart, CEO SCS Broadband 434.263.6363 O 434.942.6510 C cstew...@scsbroadband.com “We Keep You Up and Running” Please send sales inquiries to sa...@scsbroadband.com Please send service/repair requests to supp...@scsbroadband.com ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Airfiber 5 - power from dc
Hi, Has anyone powered an Airfiber5 from DC. can you share your setup? Is it passive poe? Regards ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Airfiber 5 - power from dc
http://tyconpower.com/products/files/TP-DCDC-xx56G-VHP_POE_Ins-Conv_UBNT_AirFiber_Spec_Sheet.pdf From: Ken Patrick patr...@my9ja.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:22 PM Subject: [Ubnt_users] Airfiber 5 - power from dc Hi, Has anyone powered an Airfiber5 from DC. can you share your setup?Is it passive poe? Regards ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Airfiber 5 - power from dc
I've had a couple of these running af24s for about 6 months or so and work great. Chris Sent via the Samsung Galaxy Note® 3, an ATT 4G LTE smartphone div Original message /divdivFrom: Jason Bailey j284...@yahoo.com /divdivDate:12/25/2014 10:36 PM (GMT-06:00) /divdivTo: Ubiquiti Users Group ubnt_users@wispa.org /divdivCc: /divdivSubject: Re: [Ubnt_users] Airfiber 5 - power from dc /divdiv /divhttp://tyconpower.com/products/files/TP-DCDC-xx56G-VHP_POE_Ins-Conv_UBNT_AirFiber_Spec_Sheet.pdf From: Ken Patrick patr...@my9ja.com To: Ubiquiti Users Group ubnt_users@wispa.org Sent: Thursday, December 25, 2014 11:22 PM Subject: [Ubnt_users] Airfiber 5 - power from dc Hi, Has anyone powered an Airfiber5 from DC. can you share your setup? Is it passive poe? Regards ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users