Re: [Ubnt_users] Reboot problem when connecting to AP

[Rory Conaway]

Here is one other funny thing.  We pointed one of the radios to a different AP. 
 Came right up, no reboot.

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Rory Conaway
Sent: Tuesday, December 27, 2016 10:33 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

This AP, Rocket 5M only has 1 client attached.  We got to the point of just 
running premade jumpers, multiples of them, multiple PoE power supplies, and 
finally even a netonix.  The clients all rebooted.

Rory

From: ubnt_users-boun...@wispa.org 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of Tyson
Sent: Tuesday, December 27, 2016 10:01 PM
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Rory Conaway mailto:r...@triadwireless.net>>
Date: 12/27/16 9:42 PM (GMT-06:00)
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: [Ubnt_users] Reboot problem when connecting to AP

We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We have used different cables, power supplies, etc… Putting on 6.0 right now 
but this is just weird.  We have also tried multiple IP addresses in case there 
was an IP conflict.   Any ideas are welcome.

Rory Conaway • Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net
www.triadwireless.net

"I led the league in go get 'em next time." - Bob 
Uecker

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

[Rory Conaway]

This AP, Rocket 5M only has 1 client attached.  We got to the point of just 
running premade jumpers, multiples of them, multiple PoE power supplies, and 
finally even a netonix.  The clients all rebooted.

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Tyson
Sent: Tuesday, December 27, 2016 10:01 PM
To: Ubiquiti Users Group 
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Rory Conaway mailto:r...@triadwireless.net>>
Date: 12/27/16 9:42 PM (GMT-06:00)
To: Ubiquiti Users Group mailto:ubnt_users@wispa.org>>
Subject: [Ubnt_users] Reboot problem when connecting to AP

We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We have used different cables, power supplies, etc… Putting on 6.0 right now 
but this is just weird.  We have also tried multiple IP addresses in case there 
was an IP conflict.   Any ideas are welcome.

Rory Conaway • Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net
www.triadwireless.net

"I led the league in go get 'em next time." - Bob 
Uecker

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

[Tyson]

So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's


Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Rory Conaway  
Date: 12/27/16  9:42 PM  (GMT-06:00) To: Ubiquiti Users Group 
 Subject: [Ubnt_users] Reboot problem when connecting to 
AP 


We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We
 have used different cables, power supplies, etc… Putting on 6.0 right now but 
this is just weird.  We have also tried multiple IP addresses in case there was 
an IP conflict.   Any ideas are welcome.
 
Rory Conaway
• Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net
www.triadwireless.net
 
"I led the league in go get 'em next time." -

Bob Uecker
 

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] Reboot problem when connecting to AP

[Rory Conaway]

We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400's and NB19's reboot. 
 We have used different cables, power supplies, etc... Putting on 6.0 right now 
but this is just weird.  We have also tried multiple IP addresses in case there 
was an IP conflict.   Any ideas are welcome.

Rory Conaway * Triad Wireless * CEO
4226 S. 37th Street * Phoenix * AZ 85040
602-426-0542
r...@triadwireless.net
www.triadwireless.net

"I led the league in go get 'em next time." - Bob 
Uecker

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users