[Bug 237604] Re: Ctrl-key stuck in Gnome after continued browsing
It's been 16 hours without the hotkeys-setup service, and so far the keyboard has worked perfectly. It looks as if we may have found our culprit. -- Ctrl-key stuck in Gnome after continued browsing https://bugs.launchpad.net/bugs/237604 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312090] [NEW] Offer 24-hour or AM/PM time format configuration
Public bug reported: Binary package hint: base-installer Ask during installation for 24-hour or AM/PM time format. Many people use en_US.UTF-8 settings for keyboard et cetera but within this group, many people would like 24-hours time display in their applications. For beginners, it is too difficult to make this setting by adding this line: LC_TIME="nl_NL.UTF-8" to this file: /etc/default/locale The nl_NL can be derived from the time zone, when a user would like 24-hour display in stead of AM/PM. User should be told via help text that this configuration, setting time format to Dutch (or whatever) or English, is regading 24-hours and AM/PM display. See independent bug report for GNOME http://bugzilla.gnome.org/show_bug.cgi?id=565908 but this also should be done on system level during installation. Implementing the functionality described above will improve the overall user satisfaction and position Ubuntu better for normal users. ** Affects: base-installer (Ubuntu) Importance: Undecided Status: New -- Offer 24-hour or AM/PM time format configuration https://bugs.launchpad.net/bugs/312090 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 258823] Re: With fglrx, OpenOffice buttons are invisible and reappear when you hover over them
@blazzr : This solution works for me too. Thanks!! -- With fglrx, OpenOffice buttons are invisible and reappear when you hover over them https://bugs.launchpad.net/bugs/258823 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194214] Re: Keys get "stuck" down
16 hours, and it's still working. So it's not entirely unlikely hotkeys- setup has been causing the keyboard problems all along. -- Keys get "stuck" down https://bugs.launchpad.net/bugs/194214 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312091] [NEW] default filename for screenshot should include date and/or time
Public bug reported: This bugreport tracks http://brainstorm.ubuntu.com/idea/16850/ as well as upstream (since it is not possible to link gnome bugzilla bug to brainstorm idea directly). Upstream has patch for review, https://launchpad.net/~eudoxos/+archive has package with the pach applied for intrepid. ** Affects: gnome-utils Importance: Unknown Status: Unknown ** Affects: gnome-utils (Ubuntu) Importance: Undecided Assignee: Václav Šmilauer (eudoxos) Status: In Progress ** Changed in: gnome-utils (Ubuntu) Status: New => In Progress ** Changed in: gnome-utils (Ubuntu) Assignee: (unassigned) => Václav Šmilauer (eudoxos) ** Bug watch added: GNOME Bug Tracker #565907 http://bugzilla.gnome.org/show_bug.cgi?id=565907 ** Also affects: gnome-utils via http://bugzilla.gnome.org/show_bug.cgi?id=565907 Importance: Unknown Status: Unknown -- default filename for screenshot should include date and/or time https://bugs.launchpad.net/bugs/312091 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312092] [NEW] Failed to update to jaunty via update-manager
Public bug reported: Binary package hint: update-manager-core I am on Ubuntu 8.10 and trying to update to the 9.04 alpha, by running "sudo update-manager -d". I get the following error W:Failed to fetch http://security.ubuntu.com/ubuntu/dists/jaunty-security/Release Unable to find expected entry partner/binary-i386/Packages in Meta-index file (malformed Release file?) , W:Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/jaunty-updates/Release Unable to find expected entry partner/binary-i386/Packages in Meta-index file (malformed Release file?) , E:Some index files failed to download, they have been ignored, or old ones used instead. Output for apt-cache policy update-manager-core Installed: 1:0.93.34 Candidate: 1:0.93.34 Version table: *** 1:0.93.34 0 500 http://us.archive.ubuntu.com intrepid-updates/main Packages 100 /var/lib/dpkg/status 1:0.93.32 0 500 http://us.archive.ubuntu.com intrepid/main Packages I looked in /var/log/dist-upgrade and attached the log file with relevant information. ** Affects: update-manager (Ubuntu) Importance: Undecided Status: New -- Failed to update to jaunty via update-manager https://bugs.launchpad.net/bugs/312092 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312092] Re: Failed to update to jaunty via update-manager
** Attachment added: "/var/log/dist-upgrade/main.log" http://launchpadlibrarian.net/20791338/main.log -- Failed to update to jaunty via update-manager https://bugs.launchpad.net/bugs/312092 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 304252] Re: please backport transmission 1.40 from jaunty
Jean Levasseur Is that transmission 1.42 you are talking about? -- Regards, Shirish Agarwal This email is licensed under http://creativecommons.org/licenses/by-nc/3.0/ http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 -- please backport transmission 1.40 from jaunty https://bugs.launchpad.net/bugs/304252 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 287502] Re: please package TeXLive 2008
** Tags added: needs-update -- please package TeXLive 2008 https://bugs.launchpad.net/bugs/287502 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185208] Re: Ctrl+Alt keys "stuck"
If you perform "dmesg | grep kbd" that is -- Ctrl+Alt keys "stuck" https://bugs.launchpad.net/bugs/185208 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 185208] Re: Ctrl+Alt keys "stuck"
Are you getting errors like this? [4335062.871000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.546000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335063.546000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.607000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335063.607000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335073.996000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335073.996000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335074.114000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335074.114000] atkbd.c: Use 'setkeycodes e02a ' to make it known. In that case, the culprit might the service hotkeys-setup, which is what is causing these error messages. I've been having this problem for ages, across several releases of Ubuntu and in both Gnome and KDE. Now, after 16 hours without hotkeys-setup, it's still working. -- Ctrl+Alt keys "stuck" https://bugs.launchpad.net/bugs/185208 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 179846] Re: rdesktop ctrl key gets stuck on randomly
I've had a stuck ctrl key that may be related the "hotkeys-setup" service. The following messages appeared in dmesg: [4335062.871000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.546000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335063.546000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.607000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335063.607000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335073.996000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335073.996000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335074.114000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335074.114000] atkbd.c: Use 'setkeycodes e02a ' to make it known. Disabling hotkeys-setup took care of the error messages, and appears to have solved the problem. -- rdesktop ctrl key gets stuck on randomly https://bugs.launchpad.net/bugs/179846 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 124406] Re: Keyboard keys get stuck and repeat (Feisty, Gutsy)
Are you by any chance getting error messages like this in dmesg? [4335062.871000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.546000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335063.546000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335063.607000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335063.607000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335073.996000] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0060/serio0). [4335073.996000] atkbd.c: Use 'setkeycodes e02a ' to make it known. [4335074.114000] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa0060/serio0). [4335074.114000] atkbd.c: Use 'setkeycodes e02a ' to make it known. If you are, they might be caused by a service called "hotkeys-setup". I've been having a problem with a stuck ctrl key across several releases and configurations of Ubuntu, and removing hotkeys-setup now finally seems to have solved the problem. -- Keyboard keys get stuck and repeat (Feisty, Gutsy) https://bugs.launchpad.net/bugs/124406 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312092] Re: Failed to update to jaunty via update-manager
** Changed in: update-manager (Ubuntu) Sourcepackagename: update-manager-core => update-manager -- Failed to update to jaunty via update-manager https://bugs.launchpad.net/bugs/312092 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312093] [NEW] absent program name in error messages to stderr
Public bug reported: Binary package hint: tracker I have trackerd in my gnome session. In .xsession-errors I see messages: --- Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkOptionMenu::indicator-spacing' of type `GtkBorder' from rc file value "0" of type `glong' create pidfile failed: File exists Warning: hotplug syncing disabled. Disk space is low! Disk space is low! Disk space is low! Disk space is low! Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". -- Gtk-Message, Xlib - is not related to this bug report. This bug about "Disk space is low!" without specify program which prodeces this message. Expected result: Gtk-Message: (for origin information, set GTK_DEBUG): failed to retrieve property `GtkOptionMenu::indicator-spacing' of type `GtkBorder' from rc file value "0" of type `glong' create pidfile failed: File exists Warning: hotplug syncing disabled. trackerd: Disk space is low! <== with specify program name an begin of line trackerd: Disk space is low! trackerd: Disk space is low! trackerd: Disk space is low! Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Additional references: Gnu Coding Standards, Formatting Error Messages: http://www.gnu.org/prep/standards/html_node/Errors.html#Errors ** Affects: tracker (Ubuntu) Importance: Undecided Status: New -- absent program name in error messages to stderr https://bugs.launchpad.net/bugs/312093 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 264943] Re: gvfsd-smb crashed with SIGSEGV in strlen()
For me too, Great work Thanks Willem Op maandag 29-12-2008 om 01:56 uur [tijdzone +], schreef tomek.bury: > Works for me too. > > Good work! > > Thanks, > Tomek > > > 2008/12/28 ^_Pepe_^ > > > Hi everyone! > > > > Worked for me, for read AND write into my Conceptronic NAS disk! > > > > Good job guys! > > > > Thanks for all to everyone > > > > Regards > > > > -- > > gvfsd-smb crashed with SIGSEGV in strlen() > > https://bugs.launchpad.net/bugs/264943 > > You received this bug notification because you are a direct subscriber > > of the bug. > > > -- gvfsd-smb crashed with SIGSEGV in strlen() https://bugs.launchpad.net/bugs/264943 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 301429] Re: Update audacity to 1.3.6 and backport it to intrepid and hardy
Backport tasks are invalid since 1.3.6 does not exist in the Ubuntu archives. This upgrade will mostly fix bug 201291. ** Changed in: audacity (Ubuntu) Importance: Undecided => Wishlist Status: Confirmed => Triaged ** Changed in: hardy-backports Status: New => Invalid ** Changed in: intrepid-backports Status: New => Invalid ** Summary changed: - Update audacity to 1.3.6 and backport it to intrepid and hardy + Update audacity to 1.3.6 ** Description changed: Binary package hint: audacity Upstream released 1.3.6 (currently 1.3.5 in hardy, intrepid, jaunty). - Request for update in jaunty and backport to hardy, intrepid. + Request for update in jaunty. In particular, this release fixes the bug in "Get Noise Profile", as explained here: https://bugs.launchpad.net/ubuntu/+source/audacity/+bug/290100/comments/2 Complete changelog: Changes in 1.3.6 Beta (since Alpha 1.3.6a6): Interface: * "Save Compressed Copy of Project" saves in much smaller .OGG format to facilitate online transmission of projects * Improved MIDI import and export routines, and clearer color for selection region * Default temporary directory on Mac now accessible in Finder Import / Export: * Stability improvements in on-demand loading * FFmpeg: support for latest version of library, improved version checks and error messages, stability improvements in custom exporter Bug Fixes: * Crash in "Get Noise Profile" step of Noise Removal at project rates below 20480 Hz. * Underestimation of peak level in tracks with a small number of different peaks * Truncate Silence could result in repeated or lost audio if applied to the whole of a track * Other interface, generating, exporting and platform-specific fixes Compilation: * Added autoconf macro archive to CVS, enabling *.nix users without this archive to build --with -MIDI -- Update audacity to 1.3.6 https://bugs.launchpad.net/bugs/301429 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 285323] Re: Losing keyboard and mouse control when changing screen brightness with fn + arrow under intrepid
I agree totally with Wirawan. This bug, though small, is very serious. I found the workaround Ctrl+Alt+Fx by myself because I wanted to check the problem from the command line, but there are more and more users out there who have no idea that their Linux has six text terminals. The only thing they know is: if I use completely normal keys on my keyboard, Linux crashes. Their conclusion will be that Ubuntu, or Linux in general, sucks. My setup, in case anybody is interested: Inspiron 1150, Linux inspiron1150 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linux. o...@inspiron1150:~$ sudo dmidecode | grep -i -a1 -b1 "Vendor"; sudo dmidecode | grep -i -a1 -b1 "Product Name" 372-BIOS Information 389:Vendor: Dell Computer Corporation 424-Version: A05 1278- Manufacturer: Dell Computer Corporation 1319: Product Name: Inspiron 1150 1367- Version: Not Specified -- 1546- Manufacturer: Dell Computer Corporation 1587: Product Name: 0F3553 1609- Version: I am very grateful for all the people here who have spent time debugging this! Thank you all. I hope the patch is incorporated in the kernel soon. -- Losing keyboard and mouse control when changing screen brightness with fn + arrow under intrepid https://bugs.launchpad.net/bugs/285323 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 124406] Re: Keyboard keys get stuck and repeat (Feisty, Gutsy)
2Don, I think the priority of interrupt handling is not the problem, the race conditions are. I've never had this problem on single-core CPU. Unloading most of ACPI stuff will solve the problem, however this is a nasty solution (I've laptop and use events of ac/battery for energy profile changes). It might be also the problem of keyboard itself, the firmware that acts odd... In windows I get shift/ctrl/alt stuck every 2-3 hour, especially if Firefox + Zend studio are loaded. Wit the latest patches (auto- install 2-3 weeks ago) the problem is now appearing even more frequent. Anyway this proves that keyboard is handled differently in Windows and Linux, I've never seen repeating keys (missing ordinary key release) in Windows and stuck control keys (missing shift/ctrl/alt key release) in Linux. I will try to compile non-preemptive kernel and report results later.'' 2David Oftedal no, I dont' see these messages in dmesg. -- Keyboard keys get stuck and repeat (Feisty, Gutsy) https://bugs.launchpad.net/bugs/124406 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308898] Re: mouse cursor theme oxygen changes over window border
On KDE 4 too, enabling Compiz, the mouse theme for resizing windows is different than the one set in KDE Control Center, which is often DMZ- Black. Yes, thank you Eithel for filing this bug, because it bugs me a little bit too. ** Changed in: oxygencursors (Ubuntu) Status: New => Confirmed -- mouse cursor theme oxygen changes over window border https://bugs.launchpad.net/bugs/308898 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 308898] Re: mouse cursor theme oxygen changes over window border
By the way, I must add that I'm using Mandriva 2009 facing this issue, not Ubuntu. And I'm using the cute Oxygen Yellow mouse theme. So I guess this has to do with the major window managers or desktop environments about how they specify the mouse theme to use to resize a window? -- mouse cursor theme oxygen changes over window border https://bugs.launchpad.net/bugs/308898 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 225133] Re: networkmanager-openvpn does not support pkcs12
WheelDweller wrote: > Not only "Yes", but is there some manual workaround for it? workaround : http://keystoneit.wordpress.com/2007/11/08/ubuntu-network-manager-and-openvpn/ > My > understanding of certificates is on-par with my understanding of how > network television shows are picked. :) > NetworkManager (0.7) mentions a "User Certificate", is this what they're > talking about? > > -- networkmanager-openvpn does not support pkcs12 https://bugs.launchpad.net/bugs/225133 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 282155] Re: I'll try once again. I don't get the mobile broadband modem(GIO225) to function with Glocalnet in Intrepid
Or if the reporter knows the correct configuration information, they could post it here, and anyone with the time could make the patch... -- I'll try once again. I don't get the mobile broadband modem(GIO225) to function with Glocalnet in Intrepid https://bugs.launchpad.net/bugs/282155 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 281993] Re: [intrepid] REGRESSION: multimedia keys no longer working
Clemente, You're totally right, I never even thought of that. Instead of rebooting, I just inserted the new module. I'm willing to bet that the next time I reboot, the keys will stop working. The big issue is that it seems that progress in the kernel Bugzilla report has stalled. We need to get this patch reverted in the main kernel so that we can have working keys again. I don't know about you guys, but I never realized how much I use these keys until they were unavailable. -- [intrepid] REGRESSION: multimedia keys no longer working https://bugs.launchpad.net/bugs/281993 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 87122] Re: [needs-packaging] iFolder
Please go on this your work guys! -- [needs-packaging] iFolder https://bugs.launchpad.net/bugs/87122 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312096] [NEW] SHA256 not used as hash for initial user
Public bug reported: Binary package hint: passwd After installation of Ubuntu Intrepid, the password in /etc/shadow uses MD5 ($1$) instead of SHA256 ($6$). /etc/shadow: thosjo:$1$qwXqg... Bug #303515: r...@thosjo-lab:~# passwd thosjo Enter new UNIX password: Retype new UNIX password: Sorry, passwords do not match passwd: password updated successfully r...@thosjo-lab:~# passwd thosjo Enter new UNIX password: Retype new UNIX password: passwd: password updated successfully /etc/shadow: thosjo:$6$BGQ7jue2... r...@thosjo-lab:~# dpkg -l|grep passwd ii base-passwd3.5.18 Debian base system master password and group ii passwd 1:4.1.1-1ubuntu1.2 change and administer password and group dat r...@thosjo-lab:~# uname -a && lsb_release -a Linux thosjo-lab 2.6.27-11-generic #1 SMP Fri Dec 19 16:29:52 UTC 2008 i686 GNU/Linux No LSB modules are available. Distributor ID: Ubuntu Description:Ubuntu 8.10 Release:8.10 Codename: intrepid ** Affects: shadow (Ubuntu) Importance: Undecided Status: New -- SHA256 not used as hash for initial user https://bugs.launchpad.net/bugs/312096 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288596] Re: 8.10 rc candidate install: dbus machine-id file empty
I can confirm it with a fresh install of 8.10 (final release - no beta). Same symptoms, same solution. Maybe a hint for the problem occurrence: We chose a very long name, with uppercases: GigabyteAdvance ** Changed in: dbus (Ubuntu) Status: New => Confirmed -- 8.10 rc candidate install: dbus machine-id file empty https://bugs.launchpad.net/bugs/288596 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 279512] Re: "System setting" in openvpn plugin is difficult to understand
This seems fixed in the ppa intrepid package (The checkbox now reads "Available to all users") -- "System setting" in openvpn plugin is difficult to understand https://bugs.launchpad.net/bugs/279512 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 178896] Re: Impossible restart after updating Ubuntu 7.04 to 7.10
I discover another trouble when closing the computer : it does not want to close and displays several lines of message about default on closing process ! I have to switch off the line... Please help ! Thanks for your help Fabio a écrit : > One thing I forgot to mention: if you are able to install with acpi=off, > you should also be able to boot with acpi=off. Try to: > > 1) Install from LiveCD with acpi=off > 2) When the GRUB bootloader appears, use the arrow keys to select the desired > boot option (typically the first) and press e > 3) Go to the boot options row (it should be the second row) and press e again > 4) Write acpi=off at the end of the line > 5) Press ENTER (or ESC, i can't remember right now) to go back to the > previous screen > 6) Use the arrow keys to highlight the first row and press b to boot > > -- Impossible restart after updating Ubuntu 7.04 to 7.10 https://bugs.launchpad.net/bugs/178896 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 303074] Re: [intrepid] /etc/init.d/rc level parsing is fragile
Personally I had a few local startup scripts tagged as SA1 to SA3, which I agree is debatable, but happens to work on all flavours of UNIX I have encountered so far. The effect was a double start of all daemons on init level 2. If we discard this as an invalid example, there is no guarantee, that the filename part following S?? has to start with an alphabetic letter, so the current parsing is certainly incorrect. -- [intrepid] /etc/init.d/rc level parsing is fragile https://bugs.launchpad.net/bugs/303074 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 235135] Re: [MASTER] Please backport flashplugin-nonfree version 10 beta and asound-plugins from Intrepid so we can drop libflashsupport and the crashes it causes
On 12/28/2008 05:57 PM, Wolf G. Eggers wrote: > I just upgraded to Ubuntu 8.04 LTS and tried to install > "flashplugin-nonfree". > The Adobe Flash 9 download aborted with an http 404 error. Seems like Adobe > removed Flash 9 in from it's download servers. (Does this mean there's no > Adobe Flash support in 8.04 LTS at the moment?) > Adobe uses same name tarball for all versions so the tarball they are using now is for 10 but 9 had same name. There are bugs on this all ready as i recall. Please give us time to get to it. -- Sincerely Yours, John Vivirito https://launchpad.net/~gnomefreak https://wiki.ubuntu.com/JohnVivirito Linux User# 414246 "How can i get lost, if i have no where to go" -- Metallica from Unforgiven III -- [MASTER] Please backport flashplugin-nonfree version 10 beta and asound-plugins from Intrepid so we can drop libflashsupport and the crashes it causes https://bugs.launchpad.net/bugs/235135 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 288596] Re: 8.10 install: dbus machine-id file empty
I think this bug is somewhat related to the live CD installer (and I hope this is the good way to link that bug to ubiquity...) ** Summary changed: - 8.10 rc candidate install: dbus machine-id file empty + 8.10 install: dbus machine-id file empty ** Also affects: ubiquity Importance: Undecided Status: New ** Changed in: ubiquity Status: New => Confirmed -- 8.10 install: dbus machine-id file empty https://bugs.launchpad.net/bugs/288596 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312098] [NEW] FTBFS: xserver-xorg-input-evtouch binary package not available for install in Jaunty due to FTBFS in xf86-input-evtouch source package
Public bug reported: See https://launchpad.net/ubuntu/+source/xf86-input- evtouch/0.8.7-4build2/+build/813522 I'm testing Jaunty amd64 on an HP Pavilion tx1302au tablet PC and noticed this package would not install even though it was updated for new Xorg server version. Found the build link above that indicates build failure on multiple arches. Please let me know if any further information is required. ** Affects: xf86-input-evtouch (Ubuntu) Importance: Undecided Status: New -- FTBFS: xserver-xorg-input-evtouch binary package not available for install in Jaunty due to FTBFS in xf86-input-evtouch source package https://bugs.launchpad.net/bugs/312098 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312097] Re: Gnome Scan fails to find USB scanner with 'The scan backend returned the following error: Invalid argument'
** Attachment added: "plustek.conf" http://launchpadlibrarian.net/20792063/plustek.conf -- Gnome Scan fails to find USB scanner with 'The scan backend returned the following error: Invalid argument' https://bugs.launchpad.net/bugs/312097 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312097] [NEW] Gnome Scan fails to find USB scanner with 'The scan backend returned the following error: Invalid argument'
Public bug reported: Attempting to use Gnome Scan (0.4.1-0ubuntu4) with a Canon CanoScan LIDE 25 USB scanner results in the following error after Gnome Scan goes through its 'Probing devices' phase. 'An error occured while accessing device ! The scan backend returned the following error: Invalid argument' The scanner is recognized by the Lenovo W500 laptop: $ scanimage -L device `v4l:/dev/video0' is a Noname UVC Camera (17ef:4807) virtual device device `plustek:libusb:005:003' is a Canon CanoScan LiDE25 flatbed scanner $ Using scanimage directly appears to use the wrong device by default: $ scanimage scanimage: open of device v4l:/dev/video0 failed: Invalid argument $ Some sort of scan can be made manually (although I haven't properly adjusted settings etc.): $ scanimage -d plustek:libusb:005:003 --format=tiff >test.tiff This controls the scanner and produces a scanned .tiff image. I am using Ubuntu 8.10. I modified the file /etc/sane.d/plustek.conf to identify the scanner properly - see attached. PS I am selecting 'I don't know' for the package containing the bug because I get an error on submission of this report saying "gnome-scan" does not exist in Ubuntu. Please choose a different package. If you're unsure, please select "I don't know". ** Affects: ubuntu Importance: Undecided Status: New -- Gnome Scan fails to find USB scanner with 'The scan backend returned the following error: Invalid argument' https://bugs.launchpad.net/bugs/312097 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312100] [NEW] Typo in spanish translation c onecxión should be conexión
Public bug reported: Binary package hint: wget Here it is: https://translations.launchpad.net/ubuntu/intrepid/+source/wget/+pots/wget/es/+translate?show=all&field.alternative_language=&batch=1&start=139&old_show=all&field .alternative_language-empty-marker=1 Somebody suggested a valid translation but it has not been applied. ** Affects: wget (Ubuntu) Importance: Undecided Status: New -- Typo in spanish translation conecxión should be conexión https://bugs.launchpad.net/bugs/312100 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 301429] Re: Update audacity to 1.3.6 and backport it to intrepid and hardy
On 12/29/2008 03:28 AM, Hew McLachlan wrote: > Backport tasks are invalid since 1.3.6 does not exist in the Ubuntu > archives. > > This upgrade will mostly fix bug 201291. > > ** Changed in: audacity (Ubuntu) >Importance: Undecided => Wishlist >Status: Confirmed => Triaged > > ** Changed in: hardy-backports >Status: New => Invalid > > ** Changed in: intrepid-backports >Status: New => Invalid > > ** Summary changed: > > - Update audacity to 1.3.6 and backport it to intrepid and hardy > + Update audacity to 1.3.6 > > ** Description changed: > > Binary package hint: audacity > > Upstream released 1.3.6 (currently 1.3.5 in hardy, intrepid, jaunty). > - Request for update in jaunty and backport to hardy, intrepid. > + Request for update in jaunty. > > In particular, this release fixes the bug in "Get Noise Profile", as > explained here: > https://bugs.launchpad.net/ubuntu/+source/audacity/+bug/290100/comments/2 > > Complete changelog: > Changes in 1.3.6 Beta (since Alpha 1.3.6a6): > > Interface: > * "Save Compressed Copy of Project" saves in much smaller .OGG > format to facilitate online transmission of projects > * Improved MIDI import and export routines, and clearer color > for selection region > * Default temporary directory on Mac now accessible in Finder > > Import / Export: >* Stability improvements in on-demand loading > * FFmpeg: support for latest version of library, improved > version checks and error messages, stability improvements > in custom exporter > > Bug Fixes: > * Crash in "Get Noise Profile" step of Noise Removal at project > rates below 20480 Hz. > * Underestimation of peak level in tracks with a small number > of different peaks > * Truncate Silence could result in repeated or lost audio if > applied to the whole of a track > * Other interface, generating, exporting and platform-specific > fixes > > Compilation: > * Added autoconf macro archive to CVS, enabling *.nix users > without this archive to build --with -MIDI > Maybe we should backport 1.3.5-2 to start with since we havent released 1.3.6 in Jaunty I'm guessing user will be happy about that but i dont know the package that well. -- Sincerely Yours, John Vivirito https://launchpad.net/~gnomefreak https://wiki.ubuntu.com/JohnVivirito Linux User# 414246 "How can i get lost, if i have no where to go" -- Metallica from Unforgiven III -- Update audacity to 1.3.6 https://bugs.launchpad.net/bugs/301429 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299947] Re: ldm should depend on ldm-ubuntu-themes instead of ldm-themes
Sorry, you are wrong. Why don't you try it out? There really is not package ldm-themes in intrepid. ** Changed in: ldm (Ubuntu) Status: Invalid => New -- ldm should depend on ldm-ubuntu-themes instead of ldm-themes https://bugs.launchpad.net/bugs/299947 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 243951] Re: Thunderbird does not have a -dbg package, so it's possible to file good bug reports for crashes
On 12/28/2008 02:05 PM, Michael Lustfield wrote: > Can you try this in Ubuntu 8.10 and tell us if the problem still occurs? > It does have -dbgsym packages please refer to: https://wiki.ubuntu.com/DebuggingProgramCrash change intrepid to whatever you are running than update archives and you should than see the packages. I'm marking as invalid since they are there and im betting that is why no comment, Please reopen if you still see this issue. status invalid -- Sincerely Yours, John Vivirito https://launchpad.net/~gnomefreak https://wiki.ubuntu.com/JohnVivirito Linux User# 414246 "How can i get lost, if i have no where to go" -- Metallica from Unforgiven III ** Changed in: mozilla-thunderbird (Ubuntu) Status: Incomplete => Invalid -- Thunderbird does not have a -dbg package, so it's possible to file good bug reports for crashes https://bugs.launchpad.net/bugs/243951 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 109508] Re: visor module does not load
Module is not autoloaded in Intrepid either. -- visor module does not load https://bugs.launchpad.net/bugs/109508 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312102] [NEW] pas de barre d'outils sous open office 2.4
Public bug reported: Binary package hint: openoffice.org salut, je viens d'installer ubuntu 8.10 et open office fournit avec a un bug. Pas de barre d'outils, et les infos affichés lorsque la souris pointe sur un bouton ne s'affiche pas. merci ProblemType: Bug Architecture: i386 DistroRelease: Ubuntu 8.10 NonfreeKernelModules: nvidia Package: openoffice.org-core 1:2.4.1-11ubuntu2.1 ProcEnviron: PATH=/usr/lib/openoffice/program:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: openoffice.org Uname: Linux 2.6.27-9-generic i686 ** Affects: openoffice.org (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- pas de barre d'outils sous open office 2.4 https://bugs.launchpad.net/bugs/312102 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312102] Re: pas de barre d'outils sous open office 2.4
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/20792306/Dependencies.txt -- pas de barre d'outils sous open office 2.4 https://bugs.launchpad.net/bugs/312102 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 244480] Re: support AES-XTS mode
Thank you for the guide. I was just in the process of installing Ubuntu 8.10 on my laptop via the alternative CD when I realized that XTS wasn't supported. I will be following your instructions to encrypt my system with AES-XTS. -- support AES-XTS mode https://bugs.launchpad.net/bugs/244480 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 127757] Re: nicotine crashed with AttributeError in UrlEvent()
Hi! Now I've got Open Suse 11 in my pc, but I'm planning to reinstall the new ubuntu 8.10 (sorry, but I didn't like the 8.04 release). when i back to ubuntu, i'll try to prove nicotine again. Thanks! 2008/12/23 Hew McLachlan > Thank you for taking the time to report this bug and helping to make > Ubuntu better. You reported this bug a while ago and there hasn't been > any activity in it recently. We were wondering if this is still an issue > for you. Can you try with the latest Ubuntu release? Thanks in advance. > > ** Changed in: nicotine (Ubuntu) > Status: New => Incomplete > > -- > nicotine crashed with AttributeError in UrlEvent() > https://bugs.launchpad.net/bugs/127757 > You received this bug notification because you are a direct subscriber > of the bug. > -- nicotine crashed with AttributeError in UrlEvent() https://bugs.launchpad.net/bugs/127757 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 263363] Re: xml parsing error in thunderbird due to agenda/calendar extention
Alexander Sack a écrit : > mpaq wrote: >> The problem seems, for me, to be the same for those 3 additional "Bugs >> reports" >> >> >> > which bugs are you referring to? > The one listed in the xml.png in annex of my precedent mail. #203202 #229536 #274797 Best regards Mpq -- xml parsing error in thunderbird due to agenda/calendar extention https://bugs.launchpad.net/bugs/263363 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312103] [NEW] ati radeon x200 not working intrepid
Public bug reported: I have a HP a1250n computer, with 2gb ram and a dedicated 250gb hard driver for ubuntu, dual booting with Vista. This is a brand new install of Intrepid, not an upgrade. I have used Envy in the past (Hardy install), and it worked fine. But now I have tried all of the methods I could find, EnvyNG, the Restricted drivers in the repository and the Catalyst driver directly from ATI, not of them work. And I don't know for what reasons, all of them seem different. The first thing I did, was try the restricted driver as Intrepid said there was one for my computer. When I rebooted, the logon screen was a mess, could not see anything. So I did a CTL ALT f1 to login to the console and did an apt-get install envyng-core. That installed fine, but after running envyng -t and rebooting, the same thing happened on the logon screen. So I again did the CTL ALT f1 and did the envyng --uninstall-all and rebooted. This time there was a dialog saying that there was "some" problem with the driver and that the system would boot in low-graphics mode. And there were some options to continue in low- graphics mode, one for configure and one for troubleshoot. I tried each one of them, but still nothing good happened. After that, I went to the ubuntu forums and saw that ATI has catalyst drivers out for this card, so I tried to install those using the method they say in their document. Again, no joy. So it is obvious I am missing something, but not sure what it is. Envy worked for me in Hardy, but not now. The other methods are new to Intrepid (as far as I know), and they don't work either. Any help here? ** Affects: ubuntu Importance: Undecided Status: New -- ati radeon x200 not working intrepid https://bugs.launchpad.net/bugs/312103 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312103] Re: ati radeon x200 not working intrepid
** Attachment added: "failsafeX-backup-081229063958.tar" http://launchpadlibrarian.net/20792401/failsafeX-backup-081229063958.tar -- ati radeon x200 not working intrepid https://bugs.launchpad.net/bugs/312103 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312104] [NEW] [jaunty] Gnome cannot access Internet (dns problem)
Public bug reported: I just do-release-upgraded to jaunty and encountered the following issue after reboot : I cannot access Internet because name resolution fails in firefox, pidgin, evolution. However name resolution works using command-line tools (host, dig, ping, etc.) I changed /etc/resolv.conf to use my isp's dns server instead of my router and not firefox & Co works again (until next reboot when dhcp will put back my router's ip in /etc/resolv.conf). ** Affects: ubuntu Importance: Undecided Status: New -- [jaunty] Gnome cannot access Internet (dns problem) https://bugs.launchpad.net/bugs/312104 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 272247] Re: System freezes during boot, unless I hold a key down
Am Montag, den 29.12.2008, 06:21 + schrieb thegizmoguy: > I'm going to go so far as to say that if this bug isn't fixed within a > week in 8.10 then I'm declaring Ubuntu a release-and-run OS and moving > completely to Arch Linux. > No one is forcing you to use ubuntu. Linux is all about freedom of choice. I commented about this bug 2 months back and I am waiting for this to be resolved. Right now I am using ubuntu 8.04 without any problems (you can do the same if you wish to). If you are so much in need of intrepid then download the kernel from kernel.org and compile it yourself. Stop posting these non-sense messages. If not for this distro, it would have been difficult for linux to reach this postion it has now. Have a nice day!!! cheers, Debian God -- System freezes during boot, unless I hold a key down https://bugs.launchpad.net/bugs/272247 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312105] [NEW] [jaunty] Cannot change eth0 properties (greyed out)
Public bug reported: Since upgrading to jaunty, network-manager doesn't let me change my eth0 interface's settings (all fields are greyed out). jer...@jernst-desktop:~$ groups jernst adm dialout cdrom plugdev lpadmin admin sambashare ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New ** Tags: regression-potential ** Tags added: regression-potential -- [jaunty] Cannot change eth0 properties (greyed out) https://bugs.launchpad.net/bugs/312105 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309307] Re: apport fails to file bugreports
When trying to report a bug via ubuntu-bug I will always get directed to "Lost something?" page. When trying the "Report a Problem" option in Firefox everything seems to be ok. -- apport fails to file bugreports https://bugs.launchpad.net/bugs/309307 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312110] [NEW] nm-connection-editor shows that eth0 as "never been connected" altough it's wrong
Public bug reported: "Auto eth0" always shows "never" in the last connected column in intrepid and jaunty ** Affects: network-manager (Ubuntu) Importance: Undecided Status: New -- nm-connection-editor shows that eth0 as "never been connected" altough it's wrong https://bugs.launchpad.net/bugs/312110 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312109] [NEW] ssssssssss
Public bug reported: s ProblemType: Package Architecture: amd64 Dependencies: DistroRelease: Ubuntu 8.10 ErrorMessage: subprocesul pre-installation script returnează starea de eroare la ieșire 1 Package: sun-java5-bin None [modified: /var/lib/dpkg/info/sun-java5-bin.list] SourcePackage: sun-java5 Title: package sun-java5-bin None [modified: /var/lib/dpkg/info/sun-java5-bin.list] failed to install/upgrade: subprocesul pre-installation script returnează starea de eroare la ieșire 1 Uname: Linux 2.6.27-9-generic x86_64 ** Affects: sun-java5 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- ss https://bugs.launchpad.net/bugs/312109 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312109] Re: ssssssssss
** Attachment added: "s" http://launchpadlibrarian.net/20792710/initrd.img.old ** Attachment added: "DpkgTerminalLog.gz" http://launchpadlibrarian.net/20792711/DpkgTerminalLog.gz -- ss https://bugs.launchpad.net/bugs/312109 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311879] Re: Unable to Install Ubuntu 8.10 32bit Black Screen
Xubuntu behaves exaktly the same! Guys plz help or I have to go back to the fangs of Micro$oft -- Unable to Install Ubuntu 8.10 32bit Black Screen https://bugs.launchpad.net/bugs/311879 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312112] [NEW] [needs-packaging] veusz - a scientific plotting program
Public bug reported: veusz is a GUI scientific plotting program, based on PyQt and numpy. I am the upstream author. There is an existing Fedora package. The project webpage can be found here: http://home.gna.org/veusz/ I have a in-progress deb package for the program which is uploaded to REVU: http://revu.ubuntuwire.com/details.py?package=veusz ** Affects: ubuntu Importance: Undecided Status: In Progress ** Tags: needs-packaging ** Changed in: ubuntu Status: New => In Progress -- [needs-packaging] veusz - a scientific plotting program https://bugs.launchpad.net/bugs/312112 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 272509] Re: APTonCD crashes
It's not fixed in intrepid or jaunty, as we don't have a debdiff yet. -- APTonCD crashes https://bugs.launchpad.net/bugs/272509 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 99212] Re: icon resolution too low in the file browser: side pane
This is solved. Thanks! -- icon resolution too low in the file browser: side pane https://bugs.launchpad.net/bugs/99212 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 99212] Re: icon resolution too low in the file browser: side pane
Fixed on intrepid. ** Changed in: human-icon-theme (Ubuntu) Status: New => Fix Released -- icon resolution too low in the file browser: side pane https://bugs.launchpad.net/bugs/99212 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312115] [NEW] [totem] No tags when you add files (from Add or --enqueue)
Public bug reported: Binary package hint: totem When I add music with "totem ---enqueue filename" (or with the button "Add..." of the playlist), the file(s) appear(s) but in the playlist there is only the "NAME" of the file and not '"NUMBERTRACK. ARTIST - TITLE" (from the tag of the file), I have to launch the track. Sorry for my bad English (I'm French). ProblemType: Bug Architecture: i386 Date: Mon Dec 29 11:37:32 2008 DistroRelease: Ubuntu 8.04 ExecutablePath: /usr/bin/totem-gstreamer Package: totem-gstreamer 2.22.1-0ubuntu2 PackageArchitecture: i386 ProcEnviron: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/opt/real/RealPlayer LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: totem Uname: Linux 2.6.24-16-generic i686 ** Affects: totem (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug -- [totem] No tags when you add files (from Add or --enqueue) https://bugs.launchpad.net/bugs/312115 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312115] Re: [totem] No tags when you add files (from Add or --enqueue)
** Attachment added: "Dependencies.txt" http://launchpadlibrarian.net/20792980/Dependencies.txt ** Attachment added: "ProcMaps.txt" http://launchpadlibrarian.net/20792981/ProcMaps.txt ** Attachment added: "ProcStatus.txt" http://launchpadlibrarian.net/20792982/ProcStatus.txt -- [totem] No tags when you add files (from Add or --enqueue) https://bugs.launchpad.net/bugs/312115 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312104] Re: [jaunty] Gnome cannot access Internet (dns problem)
** Tags added: regression-potential -- [jaunty] Gnome cannot access Internet (dns problem) https://bugs.launchpad.net/bugs/312104 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312112] Re: [needs-packaging] veusz - a scientific plotting program
** Changed in: ubuntu Status: In Progress => Confirmed ** Bug watch added: Debian Bug tracker #447524 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=447524 ** Also affects: debian via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=447524 Importance: Unknown Status: Unknown -- [needs-packaging] veusz - a scientific plotting program https://bugs.launchpad.net/bugs/312112 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 309601] Re: gnome volume control help missing
*** This bug is a duplicate of bug 259945 *** https://bugs.launchpad.net/bugs/259945 ** This bug has been marked a duplicate of bug 259945 gnome-volume-control: help button is not showing help -- gnome volume control help missing https://bugs.launchpad.net/bugs/309601 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 298707] Re: wacom tablet stylus input jumps to next screen prematurely in dual monitor set-up
Have the same behavior in Kubuntu 8.10 Started with a clean X11 file (instead of copying my old one from prevous linuxes), and modified it for my dual screen setup (19" monitor and rotated 15" monitor). Tablet appeared to work out of the box without having anything about the tablet in Xorg.conf. Even pressure sensitivity works. However, the tablet uses 2/3 of my 19" screen, and 1/3 of my 15" screen. When I move my mouse to the right in my big screen, it jumps to the other screen. When using it in the Gimp, some strange thing happens which might give a clue to what is wrong: I've configured the tablet to act relative to screen. When I paint, and drag my pen to the right, the paint cursor in the gimp moves faster to the right than the curser on the screen. The further to the right I get, the more difference there is. It appears that the Gimp uses the absolute position and the desktop width and height (2048X1024), where the x11 cursor places the cursor only on the used part of the screen. In the zip file I have a picture of my screen layout, my xorg.conf and my lspci output. I hope you can solve this bug. ** Attachment added: "A zipfile containing:" http://launchpadlibrarian.net/20793057/wacomissue.zip -- wacom tablet stylus input jumps to next screen prematurely in dual monitor set-up https://bugs.launchpad.net/bugs/298707 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 306131] Re: No Sound with VIA VT1708B on Ubuntu 8.10 64 bits - (solved)
Hi Morgan, I solved the problem (no sound) installing the ALSA-DRIVER 1.0.18a from http://www.alsa-project.org/main/index.php/Download -- No Sound with VIA VT1708B on Ubuntu 8.10 64 bits - (solved) https://bugs.launchpad.net/bugs/306131 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 249373] Re: gnome session does not restore the previous session
For a slightly different perspective on this bug, see http://np237.livejournal.com/22014.html However, it's true that the old behaviour was not great: openoffice didn't seem to react to session exits (logouts), for example. -- gnome session does not restore the previous session https://bugs.launchpad.net/bugs/249373 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 299706] Re: Update firefox to 3.0.5 in dell-mini version of ubuntu (still in version 3.0.3)
Firefox 3.0.5 is out, so I updated the bug title accordingly. Although "quick" updates were promised, Firefox is still in 3.0.3 in the dell mini. Thus it has many security holes exposed. I honestly don't understand the reason for such a delay. ** Summary changed: - Update firefox to 3.0.4 in dell-mini version of ubuntu + Update firefox to 3.0.5 in dell-mini version of ubuntu (still in version 3.0.3) ** Description changed: Binary package hint: firefox-3.0 - Firefox has been update to version 3.0.4 in Ubuntu hardy, but not yet + Firefox has been update to version 3.0.5 in Ubuntu hardy, but not yet available on the ubuntu version for the dell mini. -- Update firefox to 3.0.5 in dell-mini version of ubuntu (still in version 3.0.3) https://bugs.launchpad.net/bugs/299706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311770] Re: Bluefish crashes repetitively when editing a file of +- 13805 characters
Sorry, here is the file: ** Attachment added: "text.php" http://launchpadlibrarian.net/20792685/text.php -- Bluefish crashes repetitively when editing a file of +- 13805 characters https://bugs.launchpad.net/bugs/311770 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312123] [NEW] xsane name in .desktop file is too long
Public bug reported: We know that things in menus are "programs" there is no need to add that fact to the application's name (no other default application does this)... Name=XSane Image scanning program -> Name=XSane Image scanning Name[fr]=Programme d'acquisition d'images XSane -> Name[fr]=Acquisition d'images XSane ** Affects: xsane (Ubuntu) Importance: Undecided Status: New -- xsane name in .desktop file is too long https://bugs.launchpad.net/bugs/312123 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 192629] Re: "Cannot move file to trash, do you want to delete immediately?" on NTFS / VFAT partitions
Adding uid=1000 will only solve the issue for the first account created, by default given user id of 1000. So how can the same approach be made to work for all users? -- "Cannot move file to trash, do you want to delete immediately?" on NTFS / VFAT partitions https://bugs.launchpad.net/bugs/192629 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70403] Re: Strange loss of colors in text-mode terminal
** Attachment added: "CIMG1130.JPG" http://launchpadlibrarian.net/20793117/CIMG1130.JPG -- Strange loss of colors in text-mode terminal https://bugs.launchpad.net/bugs/70403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 70403] Re: Strange loss of colors in text-mode terminal
Michiel's screenshots have gone offline again, but I think I'm seeing a similar issue. If my laptop is on battery power, it skips filesystem checks, and prints an orange asterisk in the console when it does this (see CIMG1131.JPG). However, as with Michiel, it goes into powersave after a while, and clears all the white text from the console. However, it doesn't clear the orange asterisk (see CIMG1130.JPG). Is this the same bug? ** Attachment added: "CIMG1131.JPG" http://launchpadlibrarian.net/20793092/CIMG1131.JPG -- Strange loss of colors in text-mode terminal https://bugs.launchpad.net/bugs/70403 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 311770] Re: Bluefish crashes repetitively when editing a file of +- 13805 characters
Do you mean by highlighting pattern this file? I wasn't really sure... ** Attachment added: "highlighting" http://launchpadlibrarian.net/20792691/highlighting -- Bluefish crashes repetitively when editing a file of +- 13805 characters https://bugs.launchpad.net/bugs/311770 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 276463] Re: Enable new Firewire stack in default kernel config
Does anyone have an overview of which key apps need testing with this new stack so they can be ready when the new stack becomes the default? I only know of dvgrab/kino and similar video apps... -- Enable new Firewire stack in default kernel config https://bugs.launchpad.net/bugs/276463 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 290506] Re: cheese malfunctioning with UVCVIDEO webcams (was cheese doesn't show v4l2 video output and disables output on gstreamer-based apps ran afterwards)
I can confirm it works on my acer 5920g with libv4l-0 0.5.7-1~dooz1, cheese works in 640x480, thanks -- cheese malfunctioning with UVCVIDEO webcams (was cheese doesn't show v4l2 video output and disables output on gstreamer-based apps ran afterwards) https://bugs.launchpad.net/bugs/290506 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178442] Re: Pulseaudio fails to initialize Audiophile 2496
Thanks the workaround posted here helped me get my sound card ( H71 [Hoontech STA DSP24 Media 7.1], device 0: ICE1712 multi) to work with pulseaudio too after much stuffing around and hours of googling. I posted my workaround on the forum http://ubuntuforums.org/showpost.php?p=6449370&postcount=989. -- Pulseaudio fails to initialize Audiophile 2496 https://bugs.launchpad.net/bugs/178442 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312118] Re: package linux-restricted-modules-common 2.6.27-7.12 failed to install/upgrade: subprocess dpkg-deb --control returned error exit status 2 - Crashed
** Attachment added: "DpkgTerminalLog.txt" http://launchpadlibrarian.net/20793112/DpkgTerminalLog.txt -- package linux-restricted-modules-common 2.6.27-7.12 failed to install/upgrade: subprocess dpkg-deb --control returned error exit status 2 - Crashed https://bugs.launchpad.net/bugs/312118 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312118] [NEW] package linux-restricted-modules-common 2.6.27-7.12 failed to install/upgrade: subprocess dpkg-deb --control returned error exit status 2 - Crashed
Public bug reported: Syestem crashes when updating from live usb drive. ProblemType: Package Architecture: i386 Dependencies: binutils-static 2.18.93.20081009-0ubuntu1 DistroRelease: Ubuntu 8.10 ErrorMessage: subprocess dpkg-deb --control returned error exit status 2 Package: linux-restricted-modules-common 2.6.27-7.12 PackageArchitecture: all SourcePackage: linux-restricted-modules Title: package linux-restricted-modules-common 2.6.27-7.12 failed to install/upgrade: subprocess dpkg-deb --control returned error exit status 2 Uname: Linux 2.6.27-7-generic i686 ** Affects: linux-restricted-modules (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package linux-restricted-modules-common 2.6.27-7.12 failed to install/upgrade: subprocess dpkg-deb --control returned error exit status 2 - Crashed https://bugs.launchpad.net/bugs/312118 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 259945] Re: gnome-volume-control: help button is not showing help
This bug is still present after recent updates to ubuntu-doc - is the patch in place? ** Tags added: intrepid ** Summary changed: - gnome-volume-control: help button is not showing help + 'Volume Control > Help' fails with: The requested URI "ghelp:///gnome-volume-control" is invalid -- 'Volume Control > Help' fails with: The requested URI "ghelp:///gnome-volume-control" is invalid https://bugs.launchpad.net/bugs/259945 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 291138] Re: Fonts degraded in bzflag when windows effects are on.
Dear Bryce, right now, I don't want to test experimental packages in my system because at present it works and I'm afraid they could break it. I know by experience that updates are a delicate point in linux distributions. For this reason, I tried Jaunty alpha-2 on the akoya medion mini (msi wind clone). Unfortunately, there was no 3D acceleration at all, even though the logs showed no errors related to the DRI module. Therefore, I will wait for a more mature version of Jaunty. I hope the bug is still open by then. Otherwise, I will file it again. Anyway, thank you very much for your effort! Yours, J. El Saturday 20 December 2008 03:35:42 Bryce Harrington va escriure: > [This is an automatic notice.] > > We'd like to forward your bug upstream, however upstream requires > that you first test it against their newer driver code. > > To save you the effort of building the driver from source, we've built > packages for the driver and its new dependencies. > > So you have a couple options: > > 1. Download and test .debs for intrepid, from: > https://edge.launchpad.net/~intel-gfx-testing/+archive > > -or- > > 2. Download and test the Jaunty alpha-2 (or newer) Live CD, > (which includes a beta of the new xserver 1.6 as well). > See http://cdimage.ubuntu.com/releases/9.04/ for ISOs > > > Thanks ahead of time! You can simply reply to this email to report your > findings. > > > P.S., if you wish to forward your bug upstream yourself, please follow > these directions to do so: > http://intellinuxgraphics.org/how_to_report_bug.html > > > ** Changed in: xserver-xorg-video-intel (Ubuntu) >Status: Confirmed => Incomplete -- Fonts degraded in bzflag when windows effects are on. https://bugs.launchpad.net/bugs/291138 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 131026] Re: slune crashed with GLError in _soya.render()
Crash at Start: r...@nexus:~$ slune * Slune * Slune lives in /usr/share/games * Soya * Using 8 bits stencil buffer * Soya * version 0.13.2 * Using OpenGL 2.1.2 NVIDIA 177.80 * - renderer : GeForce 7600 GS/PCI/SSE2 * - vendor : NVIDIA Corporation * - maximum number of lights: 8 * - maximum number of clip planes : 6 * - maximum number of texture units : 4 * - maximum texture size: 4096 pixels Exception exceptions.TypeError: 'exceptions must be strings, classes, or instances, not exceptions.RuntimeError' in '_soya._init_sound' ignored Traceback (most recent call last): File "/usr/games/slune", line 42, in soya.set_sound_volume(globdef.SOUND_VOLUME) File "sound.pyx", line 103, in _soya.set_sound_volume TypeError: exceptions must be strings, classes, or instances, not exceptions.RuntimeError * Soya3D * Quit... v -- slune crashed with GLError in _soya.render() https://bugs.launchpad.net/bugs/131026 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 131026] Re: slune crashed with GLError in _soya.render()
Forgotten: Ubuntu 8.10 -- slune crashed with GLError in _soya.render() https://bugs.launchpad.net/bugs/131026 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 71085] Re: python in background uses too much cpu
AFAIK the output hasn't changed yet and the log file is still flooded when you use a plotter element. But this might be fixed when we implement the new logging system. -- python in background uses too much cpu https://bugs.launchpad.net/bugs/71085 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312113] [NEW] Kernel stops booting >2.6.24-21
Public bug reported: When Intrepid came out i updated the system, but when booting the new kernel, it was stopping at a point. I checked recovery mode and saw a lot of text(something about modprobe exit-ed). I tried the old kernel and it was working. I'm using it since. I tried to find a solution, turning off the LAN from Bios, or setting PCI flags did not help. I tried to reinstall the kernel many times, tried many varieties no success. 2.6.24-21 is working(and the kernels before this), what are not woking are after this(2.6.27-xx). Even from Live CD/DVD. acpi_pm_good is set for my motherboard, there is a workaround what slows down the system, i've checked and this mb does not have this hardware bug. Tried it without this, nothing changed. I have Nvidia Geforce Mx440 64mb AGP, using legacy drivers(93.4?) from repo. I've made screenshots: http://i43.tinypic.com/25zj6ub.jpg http://i41.tinypic.com/30bz3wi.jpg http://i44.tinypic.com/29bzk7r.jpg A few info, maybe helps. Linux ubuntu 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux chro...@ubuntu:~$ sudo fdisk -l [sudo] password for chronos: /dev/sda lemez: 80.0 GB, 80026361856 bájt 255 fej, 63 szektor, 9729 cilinder Egység: cilinderek 16065 * 512 = 8225280 bájt Lemezazonosító: 0x0001 Eszköz Indítás Eleje Vége Blokkok Az Rendszer /dev/sda1 * 1 127 1020096 83 Linux /dev/sda2 128960776148100 83 Linux /dev/sda396089729 979965 82 Linux lapozó / Solaris chro...@ubuntu:~$ sudo lshw -c disk -sanitize *-disk description: ATA Disk product: ST380011A vendor: Seagate physical id: 0 bus info: s...@0:0.0.0 logical name: /dev/sda version: 3.06 serial: [REMOVED] size: 74GiB (80GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=0001 *-cdrom:0 description: CD-R/CD-RW writer physical id: 1 bus info: s...@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/scd0 logical name: /dev/sr0 capabilities: audio cd-r cd-rw configuration: status=open *-cdrom:1 description: DVD writer product: CD/DVDW TS-H552B vendor: TSSTcorp physical id: 0.1.0 bus info: s...@1:0.1.0 logical name: /dev/cdrom1 logical name: /dev/cdrw1 logical name: /dev/dvd1 logical name: /dev/dvdrw1 logical name: /dev/scd1 logical name: /dev/sr1 version: TS12 capabilities: removable audio cd-r cd-rw dvd dvd-r configuration: ansiversion=5 status=open chro...@ubuntu:~$ cat /boot/grub/menu.lst default 2 timeout 10 title Ubuntu 8.10, kernel 2.6.27-11-generic root(hd0,1) kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=90da0ad8-876e-47b0-9f2c-2b0eacb5bf14 ro quiet splash rootflags=data=writeback crashkernel=384M-2G:6...@16m,2G-:1...@16m acpi_pm_good pci=routeirq initrd /boot/initrd.img-2.6.27-11-generic quiet title Ubuntu 8.10, kernel 2.6.27-11-generic (recovery mode) root(hd0,1) kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=90da0ad8-876e-47b0-9f2c-2b0eacb5bf14 ro crashkernel=384M-2G:6...@16m,2G-:1...@16m single rootflags=data=writeback initrd /boot/initrd.img-2.6.27-11-generic title Ubuntu 8.10, kernel 2.6.24-21-generic root(hd0,1) kernel /boot/vmlinuz-2.6.24-21-generic root=UUID=90da0ad8-876e-47b0-9f2c-2b0eacb5bf14 ro quiet splash rootflags=data=writeback crashkernel=384M-2G:6...@16m,2G-:1...@16m acpi_pm_good initrd /boot/initrd.img-2.6.24-21-generic quiet title Ubuntu 8.10, kernel 2.6.24-21-generic (recovery mode) root(hd0,1) kernel /boot/vmlinuz-2.6.24-21-generic root=UUID=90da0ad8-876e-47b0-9f2c-2b0eacb5bf14 ro crashkernel=384M-2G:6...@16m,2G-:1...@16m single rootflags=data=writeback initrd /boot/initrd.img-2.6.24-21-generic title Ubuntu 8.10, memtest86+ root(hd0,1) kernel /boot/memtest86+.bin quiet ** Affects: ubuntu Importance: Undecided Status: New -- Kernel stops booting >2.6.24-21 https://bugs.launchpad.net/bugs/312113 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312124] [NEW] no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop)
Public bug reported: Hello, There is no sound on my Toshiba Tecra laptop with Ubutu 8.10. The sound card is listed in lspci as 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) but it is not seen by applications using sound. Alsa doesn't seem to see it. Attached are my lspci file. It seems that ubutu doesn't load the appropriate module at boot. Furthermore, loading by hand snd-hda-intel seems to do the trick at first, and a sound card is visible, but no sound comes out. Thanks for your help, Michael ** Affects: alsa-driver (Ubuntu) Importance: Undecided Status: New -- no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop) https://bugs.launchpad.net/bugs/312124 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312124] Re: no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop)
** Attachment added: "lspci output" http://launchpadlibrarian.net/20793318/lspci.txt -- no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop) https://bugs.launchpad.net/bugs/312124 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312124] Re: no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop)
** Attachment added: "lsmod output after boot" http://launchpadlibrarian.net/20793321/lsmod.txt -- no sound with Intel HDA 82801G on Ubutun 8.10 (Toshiba Tecra laptop) https://bugs.launchpad.net/bugs/312124 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312025] Re: New upstream version 0.9.8
Ah, seems you're right. Thanks for the heads up! genpo (0.9.8-0ubuntu1) jaunty; urgency=low * New upstream release (LP: #312025) + debian/control: Switch from QT3 to QT4 - build-depend on libqt4-dev and qt4-qmake + debian/rules: Build with qmake-qt4 * debian/control: Vsc-Bzr should be Vcs-Bzr * debian/control, debian/watch: No repacking necessary any longer. -- Iain Lane Mon, 29 Dec 2008 11:23:53 + ** Attachment added: "genpo_0.9.8-0ubuntu1.diff.gz" http://launchpadlibrarian.net/20793341/genpo_0.9.8-0ubuntu1.diff.gz ** Attachment removed: "genpo_0.9.8+dfsg.1-0ubuntu1.diff.gz" http://launchpadlibrarian.net/20786635/genpo_0.9.8%2Bdfsg.1-0ubuntu1.diff.gz ** Attachment removed: "genpo_0.9.8+dfsg.1.orig.tar.gz" http://launchpadlibrarian.net/20786650/genpo_0.9.8%2Bdfsg.1.orig.tar.gz -- New upstream version 0.9.8 https://bugs.launchpad.net/bugs/312025 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 92383] Re: wr...@lba=288830h failed with SK=7h/ASC=00h/ACQ=00h]: Input/output error
/dev/sr0: "Current Write Speed" is 2.0x1352KBps. :-[ wr...@lba=143410h failed with SK=3h/WRITE ERROR]: Input/output error :-( write failed: Input/output error /dev/sr0: flushing cache /dev/sr0: updating RMA /dev/sr0: closing disc Using GnomeBaker under 8.10. I have try with Brazero, and it failed too. -- wr...@lba=288830h failed with SK=7h/ASC=00h/ACQ=00h]: Input/output error https://bugs.launchpad.net/bugs/92383 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 90863] Re: ck804xrom ck804xrom_init_one(): Unable to register resource ... kernel bug?
just have upgraded from hardy to intrepid and now I also have this message in kern.log : g...@brutus:~$ dmesg | egrep ck804xrom [ 20.596274] ck804xrom ck804xrom_init_one(): Unable to register resource 0xff00-0x - kernel bug? g...@brutus:~$ although I have only that as indication : no other (visible) sign of problem, all is working quite fine for my setup. g...@brutus:~$ uname -a Linux brutus 2.6.27-11-generic #1 SMP Fri Dec 19 16:29:52 UTC 2008 i686 GNU/Linux g...@brutus:~$ ** Attachment added: "dmesg.log" http://launchpadlibrarian.net/20793331/dmesg.log -- ck804xrom ck804xrom_init_one(): Unable to register resource ... kernel bug? https://bugs.launchpad.net/bugs/90863 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312126] [NEW] Custom browser does not receive URL at %s
Public bug reported: I have used the Preferred Applications dialog to set up a custom browser function, so that I can tell firefox to open the URL in a new tab in a particular profile (I always have two firefox instances open with different profiles): firefox -P default -remote "openurl(%s, new-tab)" I can verify this has been set using gconftool --get /desktop/gnome/url-handlers/http/command However, when I try and open a URL it fails. On investigation, running gnome-open http://google.com/ runs firefox -P default -remote "openurl(, new-tab)" http://google.com/ So basically rather than replacing the %s with the URL, it removes the %s and appends the URL ** Affects: xdg-utils Importance: Undecided Status: New ** Affects: libgnome (Ubuntu) Importance: Undecided Status: New -- Custom browser does not receive URL at %s https://bugs.launchpad.net/bugs/312126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312126] Re: Custom browser does not receive URL at %s
This seemed to start after the upgrade to Intrepid -- Custom browser does not receive URL at %s https://bugs.launchpad.net/bugs/312126 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312125] [NEW] Please sponsor gcalctool 5.25.3 into jaunty
Public bug reported: Binary package hint: gcalctool Please sponsor gcalctool 5.25.3 into jaunty. ** Affects: gcalctool (Ubuntu) Importance: Wishlist Status: New -- Please sponsor gcalctool 5.25.3 into jaunty https://bugs.launchpad.net/bugs/312125 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312125] Re: Please sponsor gcalctool 5.25.3 into jaunty
gcalctool (5.25.3-0ubuntu1) jaunty; urgency=low * New upstream version (LP: #312125). - Bitcalculating extension calculate value properly (LP: #200590). - Usage of correct operator precedence (LP: #302115). - Allow switch to rad (LP: #306702). -- Christophe Sauthier Fri, 26 Dec 2008 16:20:06 +0100 ** Attachment added: "gcalctool_5.25.3-0ubuntu1.dsc" http://launchpadlibrarian.net/20793374/gcalctool_5.25.3-0ubuntu1.dsc -- Please sponsor gcalctool 5.25.3 into jaunty https://bugs.launchpad.net/bugs/312125 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312125] Re: Please sponsor gcalctool 5.25.3 into jaunty
** Attachment added: "gcalctool_5.25.3-0ubuntu1.diff.gz" http://launchpadlibrarian.net/20793378/gcalctool_5.25.3-0ubuntu1.diff.gz ** Changed in: gcalctool (Ubuntu) Importance: Undecided => Wishlist -- Please sponsor gcalctool 5.25.3 into jaunty https://bugs.launchpad.net/bugs/312125 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 264789] Re: USB Hard Drive Not Accessible, vol_id hangs
See https://bugzilla.redhat.com/show_bug.cgi?id=473017 Its a problem with udev. See comment #3 on the list for the workaround -- USB Hard Drive Not Accessible, vol_id hangs https://bugs.launchpad.net/bugs/264789 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312128] [NEW] Option --debug-html flawed
Public bug reported: Binary package hint: liferea 1)First The man page for liferea states : > --debug-html > Enables HTML rendering debugging. Each time Liferea renders HTML > output it will also dump the generated HTML into ~/.lif‐ > erea_1.1/output.xhtml. The output.xhtml file is to be found in ~/.liferea_1.4 for liferea-1.4.14, not in ~/liferea_1.1 . 3)Second The generated ~/.liferea_1.4/output.xhtml file doesn't contain expected data. I was expecting the full xhtml code of the generated page. The actual output.xhtml file generated by liferea is attached below. - How to reproduce the bug --- * Launch liferea with option --debug-html : "liferea --debug-html" *Choose any rss item, then ask liferea to show it in a new tab *Open ~/liferea_1.4/output.xhtml and see it doesn't have the expected code. ** Affects: liferea (Ubuntu) Importance: Undecided Status: New -- Option --debug-html flawed https://bugs.launchpad.net/bugs/312128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312128] Re: Option --debug-html flawed
** Attachment added: "The actual output.xhtml file generated by liferea." http://launchpadlibrarian.net/20793436/output.xhtml -- Option --debug-html flawed https://bugs.launchpad.net/bugs/312128 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 312127] [NEW] Please remove dcl from the archive
Public bug reported: Binary package hint: dcl Please remove dcl from the archive like was done in Debian recently. http://packages.qa.debian.org/d/dcl.html http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=509869 Thanks ** Affects: dcl (Ubuntu) Importance: Undecided Status: New -- Please remove dcl from the archive https://bugs.launchpad.net/bugs/312127 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs