[Bug 720053] [NEW] Edimax Ralink wireless adapter can't see networks
Public bug reported: Binary package hint: linux-image I have an Edimax EW-7711UAN wireless adapter which should be supported by the rt2870sta driver. In maverick the adapter is recognised and an interface is created, however no traffic passes over the interface and no access points can be seen. The system is running a basic maverick i386 install with no updates (since no network connection), except for linux-image-2.6.35-25-generic since this contained the rt2870 module and I was hoping there might already be a fix for this. Other possibly relevant information below: $ uname -r 2.6.35-25-generic $ lsusb Bus 001 Device 006: ID 7392:7711 Edimax Technology Co., Ltd EW-7711UTn nLite Wireless Adapter [Ralink RT2870] $ sudo iwconfig lono wireless extensions. eth0 no wireless extensions. wlan0 Ralink STA ESSID: Nickname:RT2870STA Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thr:off Fragment thr:off Encryption key:off Link Quality=10/100 Signal level:0 dBm Noise level:-115 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 $ sudo iwlist wlan0 scan wlan0 No scan results $ sudo ifdown wlan0 ifdown: interface wlan0 not configured # /var/log/messages when inserting adapter Feb 16 13:23:29 belettes kernel: [ 214.216023] usb 1-4: new high speed USB device using ehci_hcd and address 6 Feb 16 13:23:29 belettes kernel: [ 214.367612] === pAd = e1998000, size = 472668 === Feb 16 13:23:29 belettes kernel: [ 214.367620] -- RTMPAllocAdapterBlock, Status=0 Feb 16 13:23:29 belettes kernel: [ 214.685599] -- RTMPAllocTxRxRingMemory, Status=0 Feb 16 13:23:29 belettes kernel: [ 214.687303] --RTUSBVenderReset Feb 16 13:23:29 belettes kernel: [ 214.687427] --RTUSBVenderReset Feb 16 13:23:29 belettes kernel: [ 214.971037] 1. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 214.971041] 2. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 214.971045] NVM is Efuse and its size =2d[2d0-2fc] Feb 16 13:23:29 belettes kernel: [ 215.033910] RTMPSetPhyMode: channel is out of range, use first channel=1 Feb 16 13:23:29 belettes kernel: [ 215.048781] 3. Phy Mode = 0 Feb 16 13:23:29 belettes kernel: [ 215.058408] MCS Set = 00 00 00 00 00 Feb 16 13:23:30 belettes kernel: [ 215.101901] rt28xx_init, Status=0 Feb 16 13:23:30 belettes kernel: [ 215.103398] 0x1300 = 00073200 Feb 16 13:23:30 belettes kernel: [ 215.388458] --- RTMPFreeTxRxRingMemory Feb 16 13:23:30 belettes kernel: [ 215.388501] --- RTMPFreeTxRxRingMemory Feb 16 13:23:30 belettes kernel: [ 215.663273] -- RTMPAllocTxRxRingMemory, Status=0 Feb 16 13:23:30 belettes kernel: [ 215.664982] --RTUSBVenderReset Feb 16 13:23:30 belettes kernel: [ 215.665104] --RTUSBVenderReset Feb 16 13:23:30 belettes kernel: [ 215.950089] 1. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 215.950093] 2. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 215.950097] NVM is Efuse and its size =2d[2d0-2fc] Feb 16 13:23:30 belettes kernel: [ 216.027208] 3. Phy Mode = 0 Feb 16 13:23:30 belettes kernel: [ 216.033210] MCS Set = 00 00 00 00 00 Feb 16 13:23:30 belettes kernel: [ 216.075078] rt28xx_init, Status=0 Feb 16 13:23:31 belettes kernel: [ 216.076577] 0x1300 = 00073200 ** Affects: linux-meta (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720053 Title: Edimax Ralink wireless adapter can't see networks -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720050] Re: Xorg assert failure: *** glibc detected *** /usr/bin/X: double free or corruption (!prev): 0x0990e038 ***
*** This bug is a duplicate of bug 711422 *** https://bugs.launchpad.net/bugs/711422 Thank you for taking the time to report this crash and helping to make Ubuntu better. This particular crash has already been reported and is a duplicate of bug #711422, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Attachment removed: CoreDump.gz https://bugs.launchpad.net/bugs/720050/+attachment/1853768/+files/CoreDump.gz ** Attachment removed: Dependencies.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853770/+files/Dependencies.txt ** Attachment removed: Disassembly.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853771/+files/Disassembly.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853781/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853784/+files/ProcStatus.txt ** Attachment removed: Registers.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853785/+files/Registers.txt ** Attachment removed: Stacktrace.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853786/+files/Stacktrace.txt ** Attachment removed: ThreadStacktrace.txt https://bugs.launchpad.net/bugs/720050/+attachment/1853787/+files/ThreadStacktrace.txt ** This bug has been marked a duplicate of bug 711422 Xorg assert failure: *** glibc detected *** X: double free or corruption (!prev): 0x089f5b20 - Unhandled dwarf expression opcode 0x9f * You can subscribe to bug 711422 by following this link: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/711422/+subscribe ** Visibility changed to: Public ** Tags removed: need-i386-retrace -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720050 Title: Xorg assert failure: *** glibc detected *** /usr/bin/X: double free or corruption (!prev): 0x0990e038 *** -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719835] Re: polkit-gnome-authentication-agent-1 crashed with SIGSEGV in g_datalist_id_set_data_full()
very strange as its on natty updated several times a day. Looking at package release into synaptic, the latest packages are used and dont matched the ones found into dependencies.txt So there is something wrong either with the ubuntu-bug process or with a non updated database. As this crash happen everyday after gnome-panel is loaded and same bug have already be reported and closed for the same reason (710041), you might consider this issue to make ubuntu better ** Changed in: policykit-1-gnome (Ubuntu) Status: Invalid = New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719835 Title: polkit-gnome-authentication-agent-1 crashed with SIGSEGV in g_datalist_id_set_data_full() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10
I ended up recompiling Xorg, checking out branch 1.9.4. Wasn't as tricky as I expected it to be so definitely worth it. No other incompatibilities either. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720058] [NEW] flashplugin-installer should depend on libcurl3-gnutls
Public bug reported: Binary package hint: flashplugin-installer When creating a ltsp chroot installing flashplugin-installer doesn't install libcurl3-gnutls which is needed to be able to use flash. ** Affects: flashplugin-nonfree (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720058 Title: flashplugin-installer should depend on libcurl3-gnutls -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720057] [NEW] Mysql-cluster install uses my.cnf
Public bug reported: If installing mysql-cluster-server I'd expect mysql-setup make some decision to have one my.*.cnf file per node, just to have it easy to copy the config-files on every node within the cluster. One simple way could be using the hostname to distingush between the my.cnf-Files for every node. The change could be made within /etc/init.d/mysql: 25c25 CONF=/etc/mysql/my.cnf --- CONF=/etc/mysql/my.$(hostname -s).cnf Leading to config-files: my.servername1.cnf my.servername2.cnf ... ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: mysql-cluster-server 7.0.9-1ubuntu7 ProcVersionSignature: Ubuntu 2.6.32-28.55-server 2.6.32.27+drm33.12 Uname: Linux 2.6.32-28-server x86_64 Architecture: amd64 Date: Wed Feb 16 14:35:09 2011 InstallationMedia: Ubuntu-Server 10.04.1 LTS Lucid Lynx - Release amd64 (20100816.2) PackageArchitecture: all ProcEnviron: PATH=(custom, user) LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: mysql-cluster-7.0 ** Affects: mysql-cluster-7.0 (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720057 Title: Mysql-cluster install uses my.cnf -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720057] Re: Mysql-cluster install uses my.cnf
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720057 Title: Mysql-cluster install uses my.cnf -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720055] [NEW] Unhandled fault: imprecise external abort (0x1406) at 0x2ada61a8
Public bug reported: I'm seeing this error on boot, followed by a kernel panic with panda on the 20110216.0 (headless + hwpack same buildstamp). Full log at the end of: http://validation.linaro.org/jenkins/job/Panda%20Headless%20-%20BOOT/19/console ** Affects: linux-linaro (Ubuntu) Importance: Undecided Status: New ** Tags: armel panda -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720055 Title: Unhandled fault: imprecise external abort (0x1406) at 0x2ada61a8 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10
The ABI error could be ignored using: Section ServerFlags Option ignoreABI on EndSection in xorg.conf, have you tried it yet? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 635199] Re: [armel] the ./H5detect test segfaults when built for armv7
I still think it would be reasonable to hard-code the results for float alignment requirements on ARM. On all ARM floating-point architecture versions, float and double must be size-aligned. I don't think there has ever been any exception to this rule, nor is any exception likely in the forseeable future IIUC. If the alignment requirements are relaxed someday, the hard-coded results may be suboptimal, but the package should still work. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/635199 Title: [armel] the ./H5detect test segfaults when built for armv7 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 631080] Re: [MASTER] package ttf-mscorefonts-installer 3.0 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/631080 Title: [MASTER] package ttf-mscorefonts-installer 3.0 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 574693] Re: nautilus ftp file transfer hangs in lucid
any updates on this issue? having the same problem too -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/574693 Title: nautilus ftp file transfer hangs in lucid -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720062] [NEW] package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
Public bug reported: Binary package hint: util-linux Description:Ubuntu natty (development branch) Release:11.04 Unable to locate package pkgname ProblemType: Package DistroRelease: Ubuntu 11.04 Package: mount 2.17.2-3.3ubuntu4 ProcVersionSignature: Ubuntu 2.6.38-2.29-generic 2.6.38-rc3 Uname: Linux 2.6.38-2-generic i686 Architecture: i386 Date: Wed Feb 16 18:45:03 2011 DpkgTerminalLog: Preparing to replace mount 2.17.2-3.3ubuntu4 (using .../mount_2.17.2-9.1ubuntu1_i386.deb) ... /var/lib/dpkg/tmp.ci/preinst: 49: dpkg-vendor: not found dpkg: error processing /var/cache/apt/archives/mount_2.17.2-9.1ubuntu1_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 127 ErrorMessage: subprocess new pre-installation script returned error exit status 127 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007) SourcePackage: util-linux Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 ** Affects: util-linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720062 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720062] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720062 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720061] [NEW] package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
Public bug reported: Binary package hint: util-linux package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 ProblemType: Package DistroRelease: Ubuntu 11.04 Package: mount 2.17.2-3.3ubuntu4 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 Architecture: amd64 Date: Wed Feb 16 17:40:56 2011 DpkgTerminalLog: Preparing to replace mount 2.17.2-3.3ubuntu4 (using .../mount_2.17.2-9.1ubuntu1_amd64.deb) ... /var/lib/dpkg/tmp.ci/preinst: 49: dpkg-vendor: not found dpkg: error processing /var/cache/apt/archives/mount_2.17.2-9.1ubuntu1_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 127 ErrorMessage: subprocess new pre-installation script returned error exit status 127 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha amd64 (20101206) SourcePackage: util-linux Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 ** Affects: util-linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720061 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720061] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720061 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719979] Re: Connecting to wireless network freezes Ubuntu
Apparently I have to post for every attachment, so here we go. ** Attachment added: syslog https://bugs.launchpad.net/ubuntu/+bug/719979/+attachment/1853805/+files/syslog -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719979 Title: Connecting to wireless network freezes Ubuntu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 677788] Re: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
*** This bug is a duplicate of bug 479335 *** https://bugs.launchpad.net/bugs/479335 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #479335, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 479335 synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() * You can subscribe to bug 479335 by following this link: https://bugs.launchpad.net/ubuntu/+source/synaptic/+bug/479335/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/677788 Title: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 643559] Re: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
*** This bug is a duplicate of bug 479335 *** https://bugs.launchpad.net/bugs/479335 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #479335, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 479335 synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() * You can subscribe to bug 479335 by following this link: https://bugs.launchpad.net/ubuntu/+source/synaptic/+bug/479335/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/643559 Title: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 550625] Re: Alps touchpad is recognized but synaptics clients and scrolling do not work
The fixes slated to fix this issue mentioned in this bug are already applied to the Natty kernel, we also have several confirmations that the Natty LTS backports kernel is working fine. Taking that as confirmation that Natty is fixed. Moving the development task Fix Released. ** Also affects: linux (Ubuntu Maverick) Importance: Undecided Status: New ** Changed in: linux (Ubuntu Lucid) Status: Opinion = New ** Changed in: linux (Ubuntu) Status: Incomplete = Fix Released ** Changed in: linux (Ubuntu) Assignee: (unassigned) = Andy Whitcroft (apw) ** Tags added: kernel-key -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/550625 Title: Alps touchpad is recognized but synaptics clients and scrolling do not work -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 479335] Re: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
** Changed in: synaptic (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/479335 Title: synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 440411] Re: spam of change events from drm/card0
Could someone tell me if she/he has a fix/workaround for this bug on *Lucid* ? Can I kill the thing that generates the event? Can I tell some driver to completely ignore it? I don't care if that's a manual workaround, as long as it remains on Lucid / I tried to install Kernel 2.6.35, but this was even more awful (keyboard jammed so much that there a flood of events). Also I don't want to use another kernel, because then it's trading for another set of issues. Also, does somebody knows what the bug is really about? Ok, that's an event from the graphic card (i915), occurs after suspend. But what is this event about? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/440411 Title: spam of change events from drm/card0 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 300609] Re: Remote buffer overflow vulnerability in noip2 2.1.7
This has been fixed. Current version in maverick is 2.1.9 ** Changed in: no-ip (Ubuntu) Status: Confirmed = Fix Released ** Bug watch added: Debian Bug tracker #506179 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=506179 ** Also affects: no-ip (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=506179 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. https://bugs.launchpad.net/bugs/300609 Title: Remote buffer overflow vulnerability in noip2 2.1.7 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 563497] Re: [Lucid] synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
Did you enter some text in the search box while synaptic was working on building the cache? ** Changed in: synaptic (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/563497 Title: [Lucid] synaptic crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 556255] Re: unlock screen -dialog comes up twice
** Bug watch added: GNOME Bug Tracker #642462 https://bugzilla.gnome.org/show_bug.cgi?id=642462 ** Also affects: gnome-screensaver via https://bugzilla.gnome.org/show_bug.cgi?id=642462 Importance: Unknown Status: Unknown ** Changed in: gnome-screensaver (Ubuntu) Assignee: (unassigned) = Marc Deslauriers (mdeslaur) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/556255 Title: unlock screen -dialog comes up twice -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720066] Re: indicator-weather should re-use the time-format of other indicators
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720066 Title: indicator-weather should re-use the time-format of other indicators -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720066] [NEW] indicator-weather should re-use the time-format of other indicators
Public bug reported: Binary package hint: indicator-weather I have the datetime indicator set to use 24-hour format for the dates. the weather indicator uses 12-hour (or maybe it's the locale-default). Would be nice to be consistent and use the dconf key. $ gsettings range com.canonical.indicator.datetime time-format enum 'locale-default' '12-hour' '24-hour' 'custom' $ gsettings get com.canonical.indicator.datetime time-format '24-hour' ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: indicator-weather 11.02.13+repack-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Wed Feb 16 14:50:33 2011 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Alpha i386 (20100331) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, user) LANG=en_US.UTF-8 LC_MESSAGES=en_US.utf8 SHELL=/usr/bin/tcsh SourcePackage: indicator-weather ** Affects: indicator-weather (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 natty running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720066 Title: indicator-weather should re-use the time-format of other indicators -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720065] [NEW] package udev 162-2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: I keep getting this error whenever installing or updating any pakage. I'm using USB Live installation of Maverick. ProblemType: Package DistroRelease: Ubuntu 10.10 Package: udev 162-2.2 ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 Uname: Linux 2.6.35-22-generic i686 NonfreeKernelModules: wl Architecture: i386 Date: Wed Feb 16 04:33:59 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 LiveMediaBuild: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007) MachineType: Hewlett-Packard Presario C500 (RQ335UA#ABA) ProcCmdLine: noprompt cdrom-detect/try-usb=true file=/cdrom/preseed/hostname.seed boot=casper persistent initrd=/casper/initrd.lz splash -- BOOT_IMAGE=/casper/vmlinuz SourcePackage: udev Title: package udev 162-2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 dmi.bios.date: 01/16/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.13 dmi.board.name: 30C6 dmi.board.vendor: Hewlett-Packard dmi.board.version: 78.10 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.13:bd01/16/2007:svnHewlett-Packard:pnPresarioC500(RQ335UA#ABA):pvrF.13:rvnHewlett-Packard:rn30C6:rvr78.10:cvnHewlett-Packard:ct10:cvrN/A: dmi.product.name: Presario C500 (RQ335UA#ABA) dmi.product.version: F.13 dmi.sys.vendor: Hewlett-Packard ** Affects: ubuntu Importance: Undecided Status: New ** Tags: apport-package i386 maverick -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720065 Title: package udev 162-2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720065] Re: package udev 162-2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720065 Title: package udev 162-2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720064] [NEW] Artifact on switcher window
Public bug reported: Binary package hint: compiz There is a slight artifact on the swithcer window at the bottom right hand corner. This was probably caused by the raft of updates that happened in libdecoration recently. Investigating ** Affects: unity Importance: Undecided Status: New ** Affects: compiz (Ubuntu) Importance: Undecided Status: New ** Tags: compiz-0.9 ** Also affects: unity Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720064 Title: Artifact on switcher window -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719979] Re: Connecting to wireless network freezes Ubuntu
syslog.1 ** Attachment added: syslog.1 https://bugs.launchpad.net/ubuntu/+bug/719979/+attachment/1853830/+files/syslog.1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719979 Title: Connecting to wireless network freezes Ubuntu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719979] Re: Connecting to wireless network freezes Ubuntu
kern.log ** Attachment added: kern.log https://bugs.launchpad.net/ubuntu/+bug/719979/+attachment/1853832/+files/kern.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719979 Title: Connecting to wireless network freezes Ubuntu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719979] Re: Connecting to wireless network freezes Ubuntu
kern.log.1 ** Attachment added: kern.log.1 https://bugs.launchpad.net/ubuntu/+bug/719979/+attachment/1853833/+files/kern.log.1 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719979 Title: Connecting to wireless network freezes Ubuntu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 556255] Re: unlock screen -dialog comes up twice
** Also affects: gnome-screensaver (Ubuntu Lucid) Importance: Undecided Status: New ** Also affects: gnome-screensaver (Ubuntu Maverick) Importance: Undecided Status: New ** Also affects: gnome-screensaver (Ubuntu Natty) Importance: Low Assignee: Marc Deslauriers (mdeslaur) Status: Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/556255 Title: unlock screen -dialog comes up twice -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720071] [NEW] munin-node amavis spam stats
Public bug reported: Binary package hint: munin The amavis plugin of munin-node displays 0 for probably spam and surely spam statistics. This is because it does the wrong `grep` on the mail log file. The included patch has 2 altered grep statements sure spam is a grep for 'Blocked SPAM' and probably spam is a grep for messages with a Hits score between 4 and 10 The default Ubuntu SpamAssassin configuration will tag messages with a score above 2.0 and mark messages as Blocked SPAM if it has a score above 6.31. ** Affects: munin (Ubuntu) Importance: Undecided Status: New ** Tags: amavis spam statistics -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720071 Title: munin-node amavis spam stats -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720071] Re: munin-node amavis spam stats
** Attachment added: altered grep for probably and surely spam https://bugs.launchpad.net/bugs/720071/+attachment/1853838/+files/amavis.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720071 Title: munin-node amavis spam stats -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720070] [NEW] package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
Public bug reported: Binary package hint: util-linux Linux Extensa-5510 2.6.38-3-generic #30-Ubuntu SMP Thu Feb 10 00:33:26 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux ProblemType: Package DistroRelease: Ubuntu 11.04 Package: mount 2.17.2-9.1ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 Architecture: amd64 Date: Wed Feb 16 14:27:25 2011 DpkgTerminalLog: Preparing to replace mount 2.17.2-3.3ubuntu4 (using .../mount_2.17.2-9.1ubuntu1_amd64.deb) ... /var/lib/dpkg/tmp.ci/preinst: 49: dpkg-vendor: not found dpkg: error processing /var/cache/apt/archives/mount_2.17.2-9.1ubuntu1_amd64.deb (--unpack): subprocess new pre-installation script returned error exit status 127 ErrorMessage: subprocess new pre-installation script returned error exit status 127 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha amd64 (20110202) SourcePackage: util-linux Title: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 ** Affects: util-linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720070 Title: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720070] Re: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720070 Title: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720069] [NEW] Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main)
Public bug reported: Binary package hint: conkeror conkeror (0.9.3+git110213-1) unstable; urgency=low * New upstream snapshot - Sorts keybindings and command line options alphabetically. Thanks Jari Aalto for the patches. (Closes: #606878, #606880) * Upload to unstable again since the Squeeze Release Freeze is over. -- Axel Beckert a...@debian.org Sun, 13 Feb 2011 14:20:11 +0100 ** Affects: conkeror (Ubuntu) Importance: Undecided Assignee: Mahyuddin Susanto (udienz) Status: In Progress ** Changed in: conkeror (Ubuntu) Status: New = In Progress ** Changed in: conkeror (Ubuntu) Assignee: (unassigned) = Mahyuddin Susanto (udienz) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720069 Title: Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 556255] Re: unlock screen -dialog comes up twice
** Changed in: gnome-screensaver (Ubuntu Maverick) Status: New = Confirmed ** Changed in: gnome-screensaver (Ubuntu Maverick) Assignee: (unassigned) = Marc Deslauriers (mdeslaur) ** Changed in: gnome-screensaver (Ubuntu Lucid) Status: New = Confirmed ** Changed in: gnome-screensaver (Ubuntu Lucid) Importance: Undecided = Low ** Changed in: gnome-screensaver (Ubuntu Maverick) Importance: Undecided = Low ** Changed in: gnome-screensaver (Ubuntu Lucid) Assignee: (unassigned) = Marc Deslauriers (mdeslaur) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/556255 Title: unlock screen -dialog comes up twice -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 373534] Re: Rhythmbox 0.12.0 time unknown, seekbar disabled
Problem still exists in rhythmbox 0.13.1 Enabling or risabling the crossfade plugin doesn't change anything. I have gstreamer0.10-plugins-ugly installed. Problem occurs on both ogg and mp3 files (no other types tested yet) When I start rhythmbox with the --debug option and try to move the position slider to a certain position, I get output like this: (14:49:07) [0x144ef60] [slider_moved_callback] rb-header.c:676: slider is not dragging After moving the slider, the time is updated to the current slider position, but when I resume playing, neither the slider's position nor the time are updating. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/373534 Title: Rhythmbox 0.12.0 time unknown, seekbar disabled -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720074] Re: update-manager crashed with DBusException in _run(): org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply,
*** This bug is a duplicate of bug 626798 *** https://bugs.launchpad.net/bugs/626798 Thank you for taking the time to report this crash and helping to make Ubuntu better. This particular crash has already been reported and is a duplicate of bug #626798, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Tags removed: need-duplicate-check ** Attachment removed: Dependencies.txt https://bugs.launchpad.net/bugs/720074/+attachment/1853843/+files/Dependencies.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/720074/+attachment/1853844/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/720074/+attachment/1853845/+files/ProcStatus.txt ** This bug has been marked a duplicate of private bug 626798 ** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720074 Title: update-manager crashed with DBusException in _run(): org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720073] [NEW] package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 Public bug reported: Binary package hint: util-linux Also, lintian found some minor misspellings in the man pages in this package. Looks like the preinst script in the mount package is failing. ProblemType: Package DistroRelease: Ubuntu 11.04 Package: mount 2.17.2-3.3ubuntu4 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic-pae 2.6.38-rc4 Uname: Linux 2.6.38-3-generic-pae i686 Architecture: i386 Date: Wed Feb 16 14:40:55 2011 DpkgTerminalLog: Preparing to replace mount 2.17.2-3.3ubuntu4 (using .../mount_2.17.2-9.1ubuntu1_i386.deb) ... /var/lib/dpkg/tmp.ci/preinst: 49: dpkg-vendor: not found dpkg: error processing /var/cache/apt/archives/mount_2.17.2-9.1ubuntu1_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 127 ErrorMessage: subprocess new pre-installation script returned error exit status 127 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha i386 (20110210) SourcePackage: util-linux Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 ** Affects: util-linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720073 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720073] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720073 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720073] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 One thing to note is that this was being run in VirtualBox on a 2009 Apple Powerboook. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720073 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720072] [NEW] vesa does not apply in 1280x800 resolution Natty Alpha 2
Public bug reported: Binary package hint: xserver-xorg-video-vesa Can not use 1280x800 resolution on the video card VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] in the Notebook with widescreen ** Affects: xserver-xorg-video-vesa (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720072 Title: vesa does not apply in 1280x800 resolution Natty Alpha 2 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720066] Re: indicator-weather should re-use the time-format of other indicators
** Changed in: indicator-weather (Ubuntu) Status: New = Confirmed ** Also affects: weather-indicator Importance: Undecided Status: New ** Changed in: weather-indicator Importance: Undecided = Low ** Changed in: weather-indicator Status: New = Confirmed ** Changed in: weather-indicator Milestone: None = 11.02.27 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720066 Title: indicator-weather should re-use the time-format of other indicators -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719571] Re: Natty Alpha2 monitor doesn't work, SonyVaio VPCCW1, NVIDIA GT230M
I have a Sony VAio VPCS11C5E with a Nvidia GT310m graphics card and its the same as described by DeBo. On Natty alpha 1 the display and the external monitor worked, I was able to configure them separately, but on Natty alpha 2 the display remains black after GRUB. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719571 Title: Natty Alpha2 monitor doesn't work, SonyVaio VPCCW1, NVIDIA GT230M -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10
Felix: As has been stated, IgnoreABI causes a crash; the driver simply isn't compatible. There's a reason you need to add that line manually, you know. ;) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 665391] Re: maverick kernel panic after NMI on Compal laptop
Hi, add pcie_aspm=off to /etc/defaul/grub example: GRUB_CMDLINE_LINUX=pcie_aspm=off and run sudo update-grub then reboot -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/665391 Title: maverick kernel panic after NMI on Compal laptop -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 627365] Re: soffice.bin crashed with SIGSEGV in free()
bananenkasper, thank you for taking the time to report this bug and helping to make Ubuntu better. We'd like to figure out what's causing this bug for you, but we haven't heard back from you in a while. Please answer these questions: * Is this reproducible? * If so, what specific steps should we take to recreate this bug? * Could you please attach the file you have open when this crash occurs? * Does this occur for you with LibreOffice? sudo add-apt-repository ppa:libreoffice/ppa sudo apt-get update sudo apt-get -y upgrade sudo apt-get -y install libreoffice-calc -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/627365 Title: soffice.bin crashed with SIGSEGV in free() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222324] Re: Support for panasonic hotkeys missing
As this is confirmed fixed in Karmic and later I am closing out the development task as Fix Released. ** Changed in: linux (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/222324 Title: Support for panasonic hotkeys missing -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720076] [NEW] empathy-accounts crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
Public bug reported: Binary package hint: empathy While CPU was busy, ran Chat Accounts from the me menu. The Accounts windows was slow to be populated, and I closed it. This error was then shown. ProblemType: Crash DistroRelease: Ubuntu 11.04 Package: empathy 2.33.1-0ubuntu3 Uname: Linux 2.6.38-020638rc5-generic i686 Architecture: i386 Date: Thu Feb 17 03:07:53 2011 ExecutablePath: /usr/bin/empathy-accounts InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha i386 (20110202.1) ProcCmdline: empathy-accounts ProcEnviron: SHELL=/bin/bash LC_MESSAGES=en_NZ.utf8 LANGUAGE=en_NZ:en LANG=en_NZ.UTF-8 SegvAnalysis: Segfault happened at: 0x80856ea: mov(%esi),%eax PC (0x080856ea) ok source (%esi) (0xdc63) not located in a known VMA region (needed readable region)! destination %eax ok SegvReason: reading NULL VMA Signal: 11 SourcePackage: empathy StacktraceTop: ?? () g_cclosure_marshal_VOID__VOID () from /usr/lib/libgobject-2.0.so.0 g_closure_invoke () from /usr/lib/libgobject-2.0.so.0 ?? () from /usr/lib/libgobject-2.0.so.0 g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0 Title: empathy-accounts crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare XsessionErrors: (nautilus:1263): GConf-CRITICAL **: gconf_value_free: assertion `value != NULL' failed (gnome-power-manager:1270): Gdk-CRITICAL **: IA__gdk_window_thaw_toplevel_updates_libgtk_only: assertion `private-update_and_descendants_freeze_count 0' failed ** Affects: empathy (Ubuntu) Importance: Undecided Status: New ** Tags: apport-crash i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720076 Title: empathy-accounts crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720076] Re: empathy-accounts crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID()
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720076 Title: empathy-accounts crashed with SIGSEGV in g_cclosure_marshal_VOID__VOID() -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720073] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #719754, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 719754 package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 * You can subscribe to bug 719754 by following this link: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/719754/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720073 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720070] Re: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #719754, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 719754 package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 * You can subscribe to bug 719754 by following this link: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/719754/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720070 Title: package mount 2.17.2-9.1ubuntu1 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720062] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #719754, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 719754 package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 * You can subscribe to bug 719754 by following this link: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/719754/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720062 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720061] Re: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127
*** This bug is a duplicate of bug 719754 *** https://bugs.launchpad.net/bugs/719754 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #719754, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 719754 package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 * You can subscribe to bug 719754 by following this link: https://bugs.launchpad.net/ubuntu/+source/util-linux/+bug/719754/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720061 Title: package mount 2.17.2-3.3ubuntu4 failed to install/upgrade: subprocess new pre-installation script returned error exit status 127 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719861] Re: After installation icon theme default to gnome-icon-theme and cannot be changed
Ok, I checked on that and find a clue in the daily livefs build: libpixbufloader-svg.so: libGL.so.1: cannot open shared object file: No such file or directory the issue is that the libgdk-pixbuf is ran before the libgl ldconfig call so it doesn't find it doing a sudo apt-get install libgdk-pixbuf2.0-0 --reinstall should workaround the issue ** Package changed: gnome-settings-daemon (Ubuntu) = librsvg (Ubuntu) ** Package changed: librsvg (Ubuntu) = gdk-pixbuf (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719861 Title: After installation icon theme default to gnome-icon-theme and cannot be changed -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 713931] Re: New version of moserial available upstream
There is a 2.32.0 release now, which should hopefully build cleanly on Ubuntu. It builds on Fedora 14, anyway. - Mike -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/713931 Title: New version of moserial available upstream -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10
Kenneth Long --- On Wed, 2/16/11, Felix Yan felixonm...@gmail.com wrote: From: Felix Yan felixonm...@gmail.com Subject: [Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 To: kelong_2...@yahoo.com Date: Wednesday, February 16, 2011, 8:43 AM The ABI error could be ignored using: Section ServerFlags Option ignoreABI on EndSection in xorg.conf, have you tried it yet? -- You received this bug notification because you are a direct subscriber of a duplicate bug (712852). https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 Status in “nvidia-graphics-drivers” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers” source package in Natty: Triaged Bug description: [Problem] NVIDIA does not provide xserver 1.10 support in their driver yet. Thus, its drivers do not work with Ubuntu starting on Jan 31st, when it moved to xserver 1.9.99. See https://lists.ubuntu.com/archives/ubuntu-x/2011-February/001050.html [Original Report] in natty the latest update i did dealing with xorg broke my nvidia driver and then had it were all i could get to in my system was the CLI...i had to create a .Xauthority and then it showed that the gnaric drivers were not working to display gdm or anything but the CLI and said something about the VGA and screen going agenst each other (i dont remember how it was put) i am attaching .xsession-error also i did try to install the latist daily build of natty but the instillation failed after the kernel so i can be of much help till i re-install a previous build edit: for some more info im useing a HP Pavilion dv6605us with a nvidia GeForce 7150M /nForce 630M built-in graphics the max screen resolution is 1280x800 for the screen which is a 15 To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/711409/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10
not yet.. havent had time.. hopefully by tomorrow. Kenneth Long --- On Wed, 2/16/11, Felix Yan felixonm...@gmail.com wrote: From: Felix Yan felixonm...@gmail.com Subject: [Bug 711409] Re: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 To: kelong_2...@yahoo.com Date: Wednesday, February 16, 2011, 8:43 AM The ABI error could be ignored using: Section ServerFlags Option ignoreABI on EndSection in xorg.conf, have you tried it yet? -- You received this bug notification because you are a direct subscriber of a duplicate bug (712852). https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 Status in “nvidia-graphics-drivers” package in Ubuntu: Triaged Status in “nvidia-graphics-drivers” source package in Natty: Triaged Bug description: [Problem] NVIDIA does not provide xserver 1.10 support in their driver yet. Thus, its drivers do not work with Ubuntu starting on Jan 31st, when it moved to xserver 1.9.99. See https://lists.ubuntu.com/archives/ubuntu-x/2011-February/001050.html [Original Report] in natty the latest update i did dealing with xorg broke my nvidia driver and then had it were all i could get to in my system was the CLI...i had to create a .Xauthority and then it showed that the gnaric drivers were not working to display gdm or anything but the CLI and said something about the VGA and screen going agenst each other (i dont remember how it was put) i am attaching .xsession-error also i did try to install the latist daily build of natty but the instillation failed after the kernel so i can be of much help till i re-install a previous build edit: for some more info im useing a HP Pavilion dv6605us with a nvidia GeForce 7150M /nForce 630M built-in graphics the max screen resolution is 1280x800 for the screen which is a 15 To unsubscribe from this bug, go to: https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/711409/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/711409 Title: -nvidia broken after Jan 31st updates, because it does not yet support xserver 1.10 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 422202] Re: [P4M900] Laptop TFT flickers after wake up from S3 sleep
** Changed in: linux (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/422202 Title: [P4M900] Laptop TFT flickers after wake up from S3 sleep -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 349767] Re: external USB hard drive disconnects
Spoke too soon. For some reason, it stayed up for long (8 days) than normal, but same error occurred. Also happened again 2 days later... -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/349767 Title: external USB hard drive disconnects -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720080] [NEW] KDE restart when open a video using the OpenChrome in Via card video
Public bug reported: Binary package hint: xserver-xorg-video-openchrome Using the Openchrome in the notebook Widescreen and video card Via CN896/VN896/P4M900 [Chrome 9 HC], the KDE restart when a video is opened, in the Kubuntu Natty 11.04 Alpha 2 ** Affects: xserver-xorg-video-openchrome (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720080 Title: KDE restart when open a video using the OpenChrome in Via card video -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720079] [NEW] wrong icons
Public bug reported: Binary package hint: indicator-weather the indicator-weather shows wrong icons, like a moon in the middle of the afternoon. Screenshot attached. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: indicator-weather 11.02.13+repack-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Wed Feb 16 15:13:14 2011 InstallationMedia: Ubuntu 10.04 Lucid Lynx - Alpha i386 (20100331) PackageArchitecture: all ProcEnviron: LANGUAGE=en_US:en PATH=(custom, user) LANG=en_US.UTF-8 LC_MESSAGES=en_US.utf8 SHELL=/usr/bin/tcsh SourcePackage: indicator-weather ** Affects: indicator-weather (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 natty running-unity -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720079 Title: wrong icons -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720066] Re: indicator-weather should re-use the time-format of other indicators
** Changed in: indicator-weather (Ubuntu) Importance: Undecided = Low ** Changed in: indicator-weather (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720066 Title: indicator-weather should re-use the time-format of other indicators -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720079] Re: wrong icons
** Attachment added: Screenshot-2.png https://bugs.launchpad.net/bugs/720079/+attachment/1853863/+files/Screenshot-2.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720079 Title: wrong icons -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720030] Re: indicator invisible on first run
** Changed in: indicator-weather (Ubuntu) Importance: Undecided = Medium ** Changed in: indicator-weather (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720030 Title: indicator invisible on first run -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 428619] Re: [cs46xx] Need tweaks to daemon.conf to eliminate crackle/distortion
I am closing off the kernel task here as the majority of the issues seem to be pulseaudio related. ** Changed in: linux (Ubuntu) Status: Confirmed = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/428619 Title: [cs46xx] Need tweaks to daemon.conf to eliminate crackle/distortion -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 43328] Re: The built-in terminal is not set read-only
Isn't this the duplicate of bug #3718? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/43328 Title: The built-in terminal is not set read-only -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720085] [NEW] amarok will not exit from sound preferences
Public bug reported: Binary package hint: amarok Once amarok is opened, (either directly or from sound preferences), while it can be controlled fine from sound preferences, when you exit amarok it remains 'active' in sound preferences. At this point it can no longer be opened again from preferences, only a logout/in will clear it Noting that amarok does close properly, no running process, it just never clears it's active state in sound preferences The backend used makes no difference ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: amarok 2:2.4.0-0ubuntu4 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 Architecture: amd64 Date: Wed Feb 16 09:14:50 2011 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha amd64 (20110202) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 LC_MESSAGES=en_US.utf8 SHELL=/bin/bash SourcePackage: amarok ** Affects: amarok (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug natty running-unity -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to amarok in ubuntu. https://bugs.launchpad.net/bugs/720085 Title: amarok will not exit from sound preferences -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 720085] Re: amarok will not exit from sound preferences
-- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to amarok in ubuntu. https://bugs.launchpad.net/bugs/720085 Title: amarok will not exit from sound preferences -- kubuntu-bugs mailing list kubuntu-b...@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
[Bug 719725] Re: Newer Version Available
hello tarun thanks mate! Its a QA upload meaning Quality Assurance upload and not a QA session mate.. taking a look at debian directory now regards -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719725 Title: Newer Version Available -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 713931] Re: New version of moserial available upstream
@Michael Chudobiak Thanks a lot for telling. I'll look into it and upload as soon as possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/713931 Title: New version of moserial available upstream -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 704597] Re: Please move pre-install script to jockey-common
That would mean that you wouldn't have a chance, ever, to try the upstream installer. There is a command-line option that can be used to override the script and proceed with the nvidia-installer. But as Alberto says above, if someone has gotten to that point, they obviously know exactly what they are doing. The only other option I can think of is to tie nvidia-common harder to the system using a Depends on the big metapackages (ubuntu-desktop et al.) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/704597 Title: Please move pre-install script to jockey-common -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 645290] Re: evolution crash with SIGSEGV in magazine_chain_pop_head
** Bug watch added: Red Hat Bugzilla #546375 https://bugzilla.redhat.com/show_bug.cgi?id=546375 ** Also affects: evolution (Fedora) via https://bugzilla.redhat.com/show_bug.cgi?id=546375 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/645290 Title: evolution crash with SIGSEGV in magazine_chain_pop_head -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 574910] Re: High load averages on Lucid while idling
Is this fix present in 2.6.32-312-ec2? I'm seeing high loads on machines doing almost nothing after upgrading to the grub kernel (thanks for that, BTW!), and then -312. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/574910 Title: High load averages on Lucid while idling -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 541620] Re: Ralink RT3090 Wireless Not Supported in Lucid
I've installed rt3090 package on my hp probook 4520s with Ubuntu 10.04.1 (32bit) and the wifi card works correctly. After a dist-upgrade (to 2.6.32-28-generic-pae) it stops working, so I've tried to completely remove the package and re-install it. After the reboot it returns working. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/541620 Title: Ralink RT3090 Wireless Not Supported in Lucid -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 338182] Re: Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
If this is occuring with Maverick and later and you are seeing the keycodes reported in dmesg as per the original reporter then this can be adjusted in userspace via udev. Passing over there for review. ** Also affects: udev (Ubuntu) Importance: Undecided Status: New ** Changed in: linux (Ubuntu) Status: Triaged = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/338182 Title: Samsung P560 brightness keys block keyboard and produce all-or-nothing effect -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 338182] Re: Samsung P560 brightness keys block keyboard and produce all-or-nothing effect
To clarify comment #24, the latest kernels now have generic support for setting keycodes and for indicating which keys need automatic key up events generating. This is all configurable from userspace and udev now has a special component to handle loading such configurations when the machine is detected. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/338182 Title: Samsung P560 brightness keys block keyboard and produce all-or-nothing effect -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720089] [NEW] gretl crashes right after start
Public bug reported: Binary package hint: gretl vonkad@Extensa-5510:~$ gretl Couldn't read /home/vonkad/.gretl2rc Segmentation fault (core dumped) creating the .gretl2rc directory does not help, neither does removing the .gretl directory from previous versions ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: gretl 1.9.3-1 ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 Architecture: amd64 Date: Wed Feb 16 15:23:12 2011 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Alpha amd64 (20110202) ProcEnviron: LANGUAGE=en_US:en PATH=(custom, user) LANG=en_US.UTF-8 LC_MESSAGES=en_US.utf8 SHELL=/bin/bash SourcePackage: gretl ** Affects: gretl (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720089 Title: gretl crashes right after start -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720089] Re: gretl crashes right after start
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720089 Title: gretl crashes right after start -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720079] Re: wrong icons
*** This bug is a duplicate of bug 715657 *** https://bugs.launchpad.net/bugs/715657 ** This bug has been marked a duplicate of bug 715657 Night icon at daytime * You can subscribe to bug 715657 by following this link: https://bugs.launchpad.net/weather-indicator/+bug/715657/+subscribe -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720079 Title: wrong icons -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 717496] Re: Top panel has a confusing relationship with the front-most maximized window
** Tags added: ayatana-design ** Changed in: unity Status: New = Confirmed ** Changed in: unity Importance: Undecided = Low ** Changed in: unity Importance: Low = Medium -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/717496 Title: Top panel has a confusing relationship with the front-most maximized window -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 645290] Re: evolution crash with SIGSEGV in magazine_chain_pop_head
Please look at bug #720077 which is perhaps a duplicate but has full apport information. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/645290 Title: evolution crash with SIGSEGV in magazine_chain_pop_head -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 635199] Re: [armel] the ./H5detect test segfaults when built for armv7
I have just uploaded a new revision today restoring the build to armv7 and it worked. The previous failure may have been specific to the maverick toolchain? Is there a reason not to close this bug? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/635199 Title: [armel] the ./H5detect test segfaults when built for armv7 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 324808] Re: [Toshiba Satellite L300] suspend/resume problem
Can anyone confirm whether this issue is still present in Natty? Also I see that BIOS upgrades have been slated to help with this. Please report back here. Thanks! ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/324808 Title: [Toshiba Satellite L300] suspend/resume problem -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 199887] Re: Bandrich C100 HSPDA modem failure due to udev or hald actions
This bug has been quiet for a very long time. I can't see the unusual_devs.h entry going into the mainline kernel. Can anyone confirm if this issue is still present in recent releases. Please report back here. Thanks! ** Changed in: linux (Ubuntu) Status: Confirmed = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/199887 Title: Bandrich C100 HSPDA modem failure due to udev or hald actions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720093] [NEW] package openoffice.org-dev 1:3.1.1-5ubuntu1.3 failed to install/upgrade: trying to overwrite '/usr/share/doc/openoffice.org-dev', which is also in package openoffice.org-dev-doc 1:3
Public bug reported: Binary package hint: openoffice.org Ubuntu 9.10 Karmic Koala ProblemType: Package Architecture: i386 Date: Wed Feb 16 08:51:10 2011 DistroRelease: Ubuntu 10.04 ErrorMessage: trying to overwrite '/usr/share/doc/openoffice.org-dev', which is also in package openoffice.org-dev-doc 1:3.1.1-5ubuntu1.3 NonfreeKernelModules: openafs nvidia wl Package: openoffice.org-dev 1:3.1.1-5ubuntu1.3 ProcVersionSignature: Ubuntu 2.6.31-21.59-generic SourcePackage: openoffice.org Title: package openoffice.org-dev 1:3.1.1-5ubuntu1.3 failed to install/upgrade: trying to overwrite '/usr/share/doc/openoffice.org-dev', which is also in package openoffice.org-dev-doc 1:3.1.1-5ubuntu1.3 Uname: Linux 2.6.31-21-generic i686 ** Affects: openoffice.org (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720093 Title: package openoffice.org-dev 1:3.1.1-5ubuntu1.3 failed to install/upgrade: trying to overwrite '/usr/share/doc/openoffice.org- dev', which is also in package openoffice.org-dev-doc 1:3.1.1-5ubuntu1.3 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720093] Re: package openoffice.org-dev 1:3.1.1-5ubuntu1.3 failed to install/upgrade: trying to overwrite '/usr/share/doc/openoffice.org-dev', which is also in package openoffice.org-dev-doc 1:3.1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720093 Title: package openoffice.org-dev 1:3.1.1-5ubuntu1.3 failed to install/upgrade: trying to overwrite '/usr/share/doc/openoffice.org- dev', which is also in package openoffice.org-dev-doc 1:3.1.1-5ubuntu1.3 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720083] Re: jockey-gtk crashed with GError in function(): Icon 'jockey-disabled' not present in theme
*** This bug is a duplicate of bug 715753 *** https://bugs.launchpad.net/bugs/715753 Thank you for taking the time to report this crash and helping to make Ubuntu better. This particular crash has already been reported and is a duplicate of bug #715753, so is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find. ** Tags removed: need-duplicate-check ** Attachment removed: Dependencies.txt https://bugs.launchpad.net/bugs/720083/+attachment/1853872/+files/Dependencies.txt ** Attachment removed: ProcMaps.txt https://bugs.launchpad.net/bugs/720083/+attachment/1853878/+files/ProcMaps.txt ** Attachment removed: ProcStatus.txt https://bugs.launchpad.net/bugs/720083/+attachment/1853880/+files/ProcStatus.txt ** This bug has been marked a duplicate of bug 715753 jockey-gtk crashed with GError in function(): Icon 'jockey-disabled' not present in theme * You can subscribe to bug 715753 by following this link: https://bugs.launchpad.net/ubuntu/+source/jockey/+bug/715753/+subscribe ** Visibility changed to: Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720083 Title: jockey-gtk crashed with GError in function(): Icon 'jockey-disabled' not present in theme -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720069] Re: Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main)
** Patch added: conkeror_0.9.3+git110213-1ubuntu1.dsc.debdiff https://bugs.launchpad.net/ubuntu/+source/conkeror/+bug/720069/+attachment/1853887/+files/conkeror_0.9.3%2Bgit110213-1ubuntu1.dsc.debdiff ** Changed in: conkeror (Ubuntu) Status: In Progress = New ** Changed in: conkeror (Ubuntu) Assignee: Mahyuddin Susanto (udienz) = (unassigned) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720069 Title: Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 720069] Re: Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main)
** Patch added: conkeror_ubuntu-ubuntu.debdiff https://bugs.launchpad.net/ubuntu/+source/conkeror/+bug/720069/+attachment/1853921/+files/conkeror_ubuntu-ubuntu.debdiff -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/720069 Title: Please merge conkeror 0.9.3+git110213-1 (universe) from debian unstable (main) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719979] Re: Connecting to wireless network freezes Ubuntu
** Changed in: linux (Ubuntu) Status: Incomplete = New ** Summary changed: - Connecting to wireless network freezes Ubuntu + Connecting to wireless wpa2 network, freezes Ubuntu - ar2427 ath9k -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719979 Title: Connecting to wireless wpa2 network, freezes Ubuntu - ar2427 ath9k -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719960] Re: imagemagick: PNG offset causes layer to be positioned outside the image
** Package changed: ubuntu = imagemagick (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719960 Title: imagemagick: PNG offset causes layer to be positioned outside the image -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 719861] Re: After installation icon theme default to gnome-icon-theme and cannot be changed
After applying the workaround, logout/login this issue disappear. I don't know if it can be related, but after that workaround I'm unable to reproduce the nautilus crash in bug 718098 anymore. ** Changed in: gdk-pixbuf (Ubuntu) Status: Confirmed = Triaged -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/719861 Title: After installation icon theme default to gnome-icon-theme and cannot be changed -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 718969] Re: brasero crashes when trying to install missing packages.
The tester of the maverick -proposed package in bug #529696 (comment #166) successfully tested the packagekit backend that this bug refers to. I am marking this as verification-done. ** Tags added: verification-done ** Tags removed: verification-needed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/718969 Title: brasero crashes when trying to install missing packages. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 713931] Re: New version of moserial available upstream
** Changed in: moserial (Ubuntu) Status: Confirmed = In Progress ** Changed in: moserial (Ubuntu) Assignee: (unassigned) = TARUN KUMAR MALL (c2tarun) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/713931 Title: New version of moserial available upstream -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 708883] Re: Panda board shuts down during boot
After a lot of help from kenws testing, I have a small patch which should stop the Panda going OFF. I can explain why it goes off without the patch, but since TI won't let me have a twl6030 datasheet I can't get right to the end yet. Basically the Panda PMIC is seeing an overcurrent on one of its regulators, and reporting it via b6 of its interrupt sources VXXX_SHORT. Like other PMICs, if something bad like that happens the PMIC gives the CPU a short time to acknowledge the report of the bad news, and if the CPU doesn't come and clear the interrupt within that time, the PMIC will force the device OFF for safety. The mainline twl6030 driver takes the approach that it will mask off all interrupt sources except the ones it is interested in, just MMC card detect and USB OTG ID status at the moment. Therefore if the VXXX_SHORT condition occurs with the driver as it is, the interrupt is not cleared and the PMIC panics forcing the Panda OFF. The patch enables all interrupt sources instead, so the condition is acknowledged. The variation in boards showing the problem or not is explained by the process spread of the overcurrent comparator in the PMIC; I was able to reduce the threshold on mine by lowering Vin and reducing the PMIC temperature so I could control whether VXXX_SHORT was generated or not since the actual current was marginal vs the comparator limit. But since the comparator limit would normally be quite a little bit above the max legal current, it suggests that on one regulator the Panda really is pulling more than it should. So the root cause is genuinely excessive current on one of the regulators, but I don't know which one because I don't have a datasheet (although I would look at the 2.1V one first). The final fix will be to identify the regulator and reduce the current taken. But in the meanwhile this patch should remove the symptom. ** Patch added: Workaround for Panda overcurrent detect making reboot https://bugs.launchpad.net/ubuntu/+source/linux-linaro/+bug/708883/+attachment/1853922/+files/panda-twl6030-enable-all-irq-sources.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/708883 Title: Panda board shuts down during boot -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
