[Bug 1454235] Re: [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662
At Thu, 28 May 2015 09:25:41 +0200,
David Henningsson wrote:
On 2015-05-28 09:18, Takashi Iwai wrote:
At Thu, 28 May 2015 09:15:46 +0200,
David Henningsson wrote:
When headphone mic boost is above zero, some 10 - 20 second delay
might occur before the headphone mic is operational.
Therefore disable the headphone mic boost control (recording gain is
sufficient even without it).
(Note: this patch is not about the headset mic, it's about the less
common mic-in only mode.)
BugLink: https://bugs.launchpad.net/bugs/1454235
Suggested-by: Kailang Yang kail...@realtek.com
Signed-off-by: David Henningsson david.hennings...@canonical.com
---
sound/pci/hda/patch_realtek.c | 4
1 file changed, 4 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d0fa455..87605fc 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4240,6 +4240,10 @@ static void alc_fixup_headset_mode_alc662(struct
hda_codec *codec,
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec-parse_flags |= HDA_PINCFG_HEADSET_MIC;
spec-gen.hp_mic = 1; /* Mic-in is same pin as headphone */
+
+ /* Disable boost for mic-in permanently */
+ snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_AMP_GAIN_MUTE,
0x7000);
+ snd_hda_override_wcaps(codec, 0x1b, get_wcaps(codec, 0x1b)
~AC_WCAP_IN_AMP);
Can we really hard-code NID 0x1b here...?
alc_fixup_headset_mode_alc662 is currently only called from a pin fixup
quirk (via ALC662_FIXUP_DELL_MIC_NO_PRESENCE), and that pin quirk has
headphone at 0x1b, so yes.
OK, then it'd be better to mention the assumption briefly in a
comment.
It would we better if we could make it more generic, but I think doing
this at HDA_FIXUP_PROBE instead would be too late (the boost control,
paths, etc, would already be created)...?
Right.
Do you have a better suggestion?
I think the current form is OK, but I wanted to make sure.
Takashi
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1454235
Title:
Fix headset jack on two Dell machines
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1454235/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1452601] Re: vivid container's networking.service fails on boot with signal=PIPE
No, that proposed work around seems to make no difference. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1452601 Title: vivid container's networking.service fails on boot with signal=PIPE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1452601/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1452601] Re: vivid container's networking.service fails on boot with signal=PIPE
No, that proposed work around seems to make no difference. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1452601 Title: vivid container's networking.service fails on boot with signal=PIPE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1452601/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 875153] Re: Time of installing, uninstalling or updating in history view does not respect 24 hour format
This bug probably still exists, but it is masked by the fact that the timestamps are currently not shown at all, which I have reported as bug 1459549. ** Changed in: software-center (Ubuntu) Status: Invalid = Confirmed ** Changed in: ubuntu-translations Status: Invalid = Confirmed ** Summary changed: - Time of installing, uninstalling or updating in history view does not respect 24 hour format + Timestamps in History view do not respect 24 hour format -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/875153 Title: Timestamps in History view do not respect 24 hour format To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-translations/+bug/875153/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1426490] Re: cups 2.0.2-1 100% cpu usage
Me too, exploring network printers on every startup on full cpu. Vivid 15.04 3.19.0-16-generic ** Attachment added: error_log https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1426490/+attachment/4405988/+files/error_log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1426490 Title: cups 2.0.2-1 100% cpu usage To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1426490/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] Lspci.txt
apport information ** Attachment added: Lspci.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406000/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406002/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4405997/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] UdevDb.txt
apport information ** Attachment added: UdevDb.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406008/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] PulseList.txt
apport information ** Attachment added: PulseList.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406006/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456881] Re: Some touchpads' right button doesn't work under I2C mode, need support of clickpads
We found under some extreme system usage that comment #2 can fix the problem. Run some application/operation (e.g: Play youtube on background, launch libreoffice for awhile (about 5-10min) or insert USB to copy some files : The touchpad cursor were no function after some operation, sometime it scrolling automatically or keep send press signal. Without the patch of comment #2, when the issue occurred we also check the touchpad event on ttyl1 by evtest, we can found the event keeping output without move cursor/click touchpad. Our observation is the HiDPI platform may have more loading cause this issue and sometimes its also cause xorg crash. ** Attachment added: Screenshot from 2015-05-27 17_24_59.png https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1456881/+attachment/4406011/+files/Screenshot%20from%202015-05-27%2017_24_59.png -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456881 Title: Some touchpads' right button doesn't work under I2C mode, need support of clickpads To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1456881/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] ProcEnviron.txt
apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406003/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] Re: Can't resume after hibernation
apport information ** Tags added: apport-collected ** Description changed: Hi, Since I upgraded from 14.10 to 15.04 I can no longer resume after hibernation. Upon resuming all I see is a blank screen with a blinking underscore at the top left corner, which later freezes. Also I'm using Ubuntu Gnome. Description: Ubuntu 15.04 Release: 15.04 Regards, Arvin + --- + ApportVersion: 2.17.2-0ubuntu1.1 + Architecture: amd64 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC1: arvin 1308 F pulseaudio + CurrentDesktop: GNOME + DistroRelease: Ubuntu 15.04 + HibernationDevice: RESUME=UUID=bd928b77-1bbc-4835-8697-26d8d6e0b76e + InstallationDate: Installed on 2014-11-07 (201 days ago) + InstallationMedia: Ubuntu-GNOME 14.10 Utopic Unicorn - Release amd64 (20141022.1) + MachineType: Dell Inc. XPS13 9333 + Package: linux (not installed) + ProcFB: 0 inteldrmfb + ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic.efi.signed root=UUID=9284c4b7-1cf2-44d1-b438-059d349f5193 ro quiet splash vt.handoff=7 + ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 + RelatedPackageVersions: + linux-restricted-modules-3.19.0-18-generic N/A + linux-backports-modules-3.19.0-18-generic N/A + linux-firmware 1.143.1 + Tags: vivid + Uname: Linux 3.19.0-18-generic x86_64 + UpgradeStatus: Upgraded to vivid on 2015-05-18 (9 days ago) + UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo + _MarkForUpload: True + dmi.bios.date: 03/19/2014 + dmi.bios.vendor: Dell Inc. + dmi.bios.version: A04 + dmi.board.name: 0GFTRT + dmi.board.vendor: Dell Inc. + dmi.board.version: A00 + dmi.chassis.type: 8 + dmi.chassis.vendor: Dell Inc. + dmi.chassis.version: 0.1 + dmi.modalias: dmi:bvnDellInc.:bvrA04:bd03/19/2014:svnDellInc.:pnXPS139333:pvr:rvnDellInc.:rn0GFTRT:rvrA00:cvnDellInc.:ct8:cvr0.1: + dmi.product.name: XPS13 9333 + dmi.sys.vendor: Dell Inc. ** Attachment added: AlsaInfo.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4405995/+files/AlsaInfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] RfKill.txt
apport information ** Attachment added: RfKill.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406007/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1456783] [NEW] Please add apparmor profile
Ok -- It looks good I will build a test package, and also forward this to Debian, I hesitate to Upload without the input of the Debian Maintainers, because I have been absent from open source work for four years or so. But this looks great On 05/19/2015 03:51 PM, LaMont Jones wrote: Public bug reported: The following apparmor profile appears to be working for us. Please add it to the package. ** Affects: inspircd (Ubuntu) Importance: Undecided Status: New ** Attachment added: apparmor profile https://bugs.launchpad.net/bugs/1456783/+attachment/4400530/+files/usr.sbin.inspircd -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456783 Title: Please add apparmor profile To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inspircd/+bug/1456783/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] WifiSyslog.txt
apport information ** Attachment added: WifiSyslog.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406010/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459365] ProcModules.txt
apport information ** Attachment added: ProcModules.txt https://bugs.launchpad.net/bugs/1459365/+attachment/4406005/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459365 Title: Can't resume after hibernation To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1459365/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456881] Re: Some touchpads' right button doesn't work under I2C mode, need support of clickpads
additional info of #4, the machine is Dell XPS 13 (2015) with HiDPI, HID: multitouch: add support of clickpads is not enough to fix its problem, also needs HID: multitouch: Add support for button type usage -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456881 Title: Some touchpads' right button doesn't work under I2C mode, need support of clickpads To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1456881/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1003196] Re: inspircd consumes all cpu
This is an issue that affects 1.1.x versions of inspircd I will backport 2.0 to precise, but there is nothing that can be done, otherwise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1003196 Title: inspircd consumes all cpu To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inspircd/+bug/1003196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459580] [NEW] export button doesn't export routes
Public bug reported: I'm migrating from a laptop running 14.10 to another running 15.04. 0. On 14.10 machine 1. click network manager icon 2. click 'edit connections' 3. select VPN network and click 'Edit...' 4. select 'IPv4 Settings' 5. click 'Routes...' 6. add a route 7. click 'ok' 8. click 'Save...' 9. click 'Edit...' (again) 10. click 'Export...' and save the file somewhere 11. examine contents of file ACTUAL: no routes specified EXPECTED: routes specified Predictably, when attempting to 'Import a save vpn configuration...' on the 15.03 machine using the above file, no routes are configured. Please consider exporting the entire configuration - configuring routes is quite a laborious task. 14.10 network-manager-openconnect 0.9.8.6-1ubuntu2 15.04 network-manager-openconnect 0.9.10.0-1ubuntu2 ** Affects: network-manager-openconnect (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459580 Title: export button doesn't export routes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/network-manager-openconnect/+bug/1459580/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1383213] Re: [Dash] Categorydropbox touch state
If we use the Standard list item to replace the AbstractButton in DashNavigationList.qml, it will implement the touch state, but when selected, the region of light grey turns wider than the divider, because the divider has a margin, it feels odd, so any further design? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1383213 Title: [Dash] Categorydropbox touch state To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1383213/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1338758] Re: Re-provisioning GPRS/MMS contexts requires re-starting ofono
** Branch linked: lp:ubuntu/ofono -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1338758 Title: Re-provisioning GPRS/MMS contexts requires re-starting ofono To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1338758/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1438715] Re: [list-modems] Don't display user-related information by default
** Branch linked: lp:ubuntu/ofono -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1438715 Title: [list-modems] Don't display user-related information by default To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1438715/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1452644] Re: NFSd does not start due to systemd ordering cycle with setserial
** Branch linked: lp:ubuntu/setserial -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1452644 Title: NFSd does not start due to systemd ordering cycle with setserial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/setserial/+bug/1452644/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1452644] Re: NFSd does not start due to systemd ordering cycle with setserial
** Branch linked: lp:ubuntu/setserial -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to setserial in Ubuntu. https://bugs.launchpad.net/bugs/1452644 Title: NFSd does not start due to systemd ordering cycle with setserial To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/setserial/+bug/1452644/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1340629] Re: indicator-applet-complete leaking memory
I use indicator-applet-complete with Ubuntu 14.04 LTS and gnome-session-fallback. Memory usage of the applet had increased to 460 MiB. I killed and restarted the applet, now it is using 8.8 MiB -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1340629 Title: indicator-applet-complete leaking memory To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-applet/+bug/1340629/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1448487] Re: Shimmer-theme Greybird does not get along with LXAppearance
That depends. This isn't really a very critical bug, so I suppose the fix might land in some PPA and in 15.10. Atm I don't think we'll backport it to 15.04. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1448487 Title: Shimmer-theme Greybird does not get along with LXAppearance To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxappearance/+bug/1448487/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1297849] Re: [SRU] Virtual private network connection fails after distribution upgrade due to outdated Network Manager configuration files
Same problem with 15.04 x64 since upgrade from 14.10 I've tested all the workarounds mentioned in this thread and sadly no dice. If I edit the connection configuration files in /etc/NetworkManager/system-connections and change password-flags to 0 + add: [vpn-secrets] password=my_password and restart I am able to connect every single time, but the connection doesn't work (can't reach any hosts) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1297849 Title: [SRU] Virtual private network connection fails after distribution upgrade due to outdated Network Manager configuration files To manage notifications about this bug go to: https://bugs.launchpad.net/hundredpapercuts/+bug/1297849/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454235] [PATCH] ALSA: hda - Disable Headphone Mic boost for ALC662
When headphone mic boost is above zero, some 10 - 20 second delay
might occur before the headphone mic is operational.
Therefore disable the headphone mic boost control (recording gain is
sufficient even without it).
(Note: this patch is not about the headset mic, it's about the less
common mic-in only mode.)
BugLink: https://bugs.launchpad.net/bugs/1454235
Suggested-by: Kailang Yang kail...@realtek.com
Signed-off-by: David Henningsson david.hennings...@canonical.com
---
sound/pci/hda/patch_realtek.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d0fa455..da2d371 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4240,6 +4240,11 @@ static void alc_fixup_headset_mode_alc662(struct
hda_codec *codec,
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
spec-parse_flags |= HDA_PINCFG_HEADSET_MIC;
spec-gen.hp_mic = 1; /* Mic-in is same pin as headphone */
+
+ /* Disable boost for mic-in permanently. (This code is only
called
+ from quirks that guarantee that the headphone is at NID
0x1b.) */
+ snd_hda_codec_write(codec, 0x1b, 0, AC_VERB_SET_AMP_GAIN_MUTE,
0x7000);
+ snd_hda_override_wcaps(codec, 0x1b, get_wcaps(codec, 0x1b)
~AC_WCAP_IN_AMP);
} else
alc_fixup_headset_mode(codec, fix, action);
}
--
1.9.1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1454235
Title:
Fix headset jack on two Dell machines
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1454235/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1431920] Re: Ubuntu Phone BQ: Message into welcome screen = No data sources available
why not hiding the whole circle when repirts are disabled? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1431920 Title: Ubuntu Phone BQ: Message into welcome screen = No data sources available To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/indicator-messages/+bug/1431920/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456531] Re: LightDM (?) blank/white screen after resume from suspend
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: lightdm (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456531 Title: LightDM (?) blank/white screen after resume from suspend To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lightdm/+bug/1456531/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459557] [NEW] partitions blacklisted in launcher keep coming back
Public bug reported: Ubuntu 15.04 Problem appeared after using Gparted - not sure if this is related. Symptoms: 1. 10 unmounted partitions are shown in launcher. 2. use unlock from launcher - they go away as they should. 3. log out and log back in - they are still gone as they should be. 4. reboot and log in - they all come back. 5. dconf-editor shows the partitions as blacklisted. ** Affects: unity (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459557 Title: partitions blacklisted in launcher keep coming back To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1459557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459558] [NEW] Desktop freezes and works very slowl after connecting external monitor
Public bug reported: The problem may be similar to https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1459551 ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: gnome-shell 3.14.4-0ubuntu1 ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6 Uname: Linux 3.19.0-18-generic i686 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: i386 CurrentDesktop: GNOME Date: Thu May 28 10:15:46 2015 DisplayManager: lightdm InstallationDate: Installed on 2014-01-28 (484 days ago) InstallationMedia: Ubuntu 13.10 Saucy Salamander - Release i386 (20131016.1) SourcePackage: gnome-shell UpgradeStatus: Upgraded to vivid on 2015-04-18 (39 days ago) ** Affects: gnome-shell (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 vivid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459558 Title: Desktop freezes and works very slowl after connecting external monitor To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1459558/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1375357] Re: After 12.02-14.04 upgrade, any pip upgrade with wheel files fails
From a comment on https://github.com/pypa/pip/issues/844, pip needs distribute = 0.6.28. So correct the problem, do : sudo pip install --no-use-wheel --upgrade distribute -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1375357 Title: After 12.02-14.04 upgrade, any pip upgrade with wheel files fails To manage notifications about this bug go to: https://bugs.launchpad.net/virtualenv/+bug/1375357/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456909] Re: Sync rustc 1.0.0~beta.4-1~exp1 (universe) from Debian experimental (main)
Also it has autosynced anyway so nothing for sponsors to do. If you need it to be bootstrapped please say what needs to be done and re-subscribe ~ubuntu-sponsors who can enlist a buildd admin to help. I'm unsubscribing them now. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456909 Title: Sync rustc 1.0.0~beta.4-1~exp1 (universe) from Debian experimental (main) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1456909/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1427788] Re: rilmodem: Do not always use sim's app in status-gsm_umts_index
** Branch linked: lp:ubuntu/ofono -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1427788 Title: rilmodem: Do not always use sim's app in status-gsm_umts_index To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1427788/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1383184] Re: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported
Welp, I'm kinda new to Linux. In #115, Lg mentioned ath-master root folder. Can someone tell me where is that? Stuck on step for now :( -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1383184 Title: Atheros Qualcomm Killer N1525 Wireless-AC [168c:003e] not supported To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454756] Re: set-context-property doesn't support 'Preferred' ( boolean ) property
** Branch linked: lp:ubuntu/ofono -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454756 Title: set-context-property doesn't support 'Preferred' ( boolean ) property To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1454756/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1455852] Re: 15.04 will not boot on MacBook 2,1
Also tried - also boots without issues. Nice work! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1455852 Title: 15.04 will not boot on MacBook 2,1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1455852/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1340629] Re: indicator-applet-complete leaking memory
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: indicator-applet (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1340629 Title: indicator-applet-complete leaking memory To manage notifications about this bug go to: https://bugs.launchpad.net/indicator-applet/+bug/1340629/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459066] Re: linux-keystone: 3.13.0-29.45 -proposed tracker
** Changed in: kernel-sru-workflow/prepare-package-meta Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459066 Title: linux-keystone: 3.13.0-29.45 -proposed tracker To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459066/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459565] [NEW] Errno5 Input/output error
Public bug reported: Installer encountered an error copying files to the hard disk. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubiquity 2.18.8.6 ProcVersionSignature: Ubuntu 3.16.0-30.40~14.04.1-generic 3.16.7-ckt3 Uname: Linux 3.16.0-30-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.7 Architecture: amd64 CasperVersion: 1.340 Date: Thu May 28 13:57:07 2015 InstallCmdLine: file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity cdrom-detect/try-usb=true noprompt floppy.allowed_drive_mask=0 ignore_uuid initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz.efi LiveMediaBuild: Ubuntu 14.04.2 LTS Trusty Tahr - Release amd64 (20150218.1) ProcEnviron: LANGUAGE=en_IN TERM=linux PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=en_IN SourcePackage: ubiquity UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: ubiquity (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug trusty ubiquity-2.18.8.6 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459565 Title: Errno5 Input/output error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1459565/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1163501]
*** Bug 468562 has been marked as a duplicate of this bug. *** -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1163501 Title: java crashed with SIGABRT in soup_session_feature_detach() To manage notifications about this bug go to: https://bugs.launchpad.net/eclipse/+bug/1163501/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459521] [NEW] remmina full screen doesn't work if a connection attempt is in progress
Public bug reported: Due to the fact this can take minutes the full screen mode isn't usable for a too long time. ProblemType: Bug DistroRelease: Ubuntu 15.04 Package: remmina 1.1.1-1ubuntu1 Uname: Linux 4.0.1-040001-generic x86_64 ApportVersion: 2.17.2-0ubuntu1.1 Architecture: amd64 CurrentDesktop: Unity Date: Thu May 28 08:00:46 2015 EcryptfsInUse: Yes InstallationDate: Installed on 2015-04-02 (55 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Beta amd64 (20150326) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=set LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: remmina SystemImageInfo: current build number: 0 device name: channel: daily last update: Unknown UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: remmina (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug vivid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459521 Title: remmina full screen doesn't work if a connection attempt is in progress To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/remmina/+bug/1459521/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459066] Re: linux-keystone: 3.13.0-29.45 -proposed tracker
** Description changed: This bug is for tracking the version to be filled upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:00 UTC kernel-stable-phase:Prepare kernel-stable-phase-changed:Wednesday, 27. May 2015 02:00 UTC kernel-stable-master-bug:1458618 + kernel-stable-Certification-testing-end:Thursday, 28. May 2015 06:01 UTC + kernel-stable-Security-signoff-end:Thursday, 28. May 2015 06:01 UTC -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459066 Title: linux-keystone: 3.13.0-29.45 -proposed tracker To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459066/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1457776] Re: virtualbox-dkms 4.3.10-dfsg-1ubuntu5: virtualbox kernel module failed to build
Running Trusty with original 3.13 kernel. Have been running Virtualbox a long time without problems. This crash appears after I have tried to install any other official LTS- kernel, like Utopic or Vivid. The problem does NOT disappear by purging those kernels+headers again. I have tried dpkg-reconfigure virtualbox-dkms, and for virtualbox and dkms alone as well. No result. I guess this is somewhat related to, but not the same as bug #1457776. https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1457776 As for today, I have a couple of error messages on every reboot. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1457776 Title: virtualbox-dkms 4.3.10-dfsg-1ubuntu5: virtualbox kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/virtualbox/+bug/1457776/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451448] Re: bzr fails to build on vivid (release) and trusty (test-rebuild only)
** Also affects: bzr Importance: Undecided Status: New ** Changed in: bzr Status: New = Confirmed ** Changed in: bzr Importance: Undecided = High -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451448 Title: bzr fails to build on vivid (release) and trusty (test-rebuild only) To manage notifications about this bug go to: https://bugs.launchpad.net/bzr/+bug/1451448/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1457369] Re: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel
** Patch added: this temporary patch should fix this issue https://bugs.launchpad.net/system76/+bug/1457369/+attachment/4406026/+files/0001-UBUNTU-SAUCE-Correct-skylake-and-braswell-identifica.patch -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1457369 Title: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel To manage notifications about this bug go to: https://bugs.launchpad.net/system76/+bug/1457369/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459590] [NEW] segfault on client with home on NFS
Public bug reported: I use last version (4.01-8) on Vivid. It is a fresh update, before that with same config, I had no error on Ubuntu 14.04. Server is on Centos 6 and client is now Ubuntu 15.04. Quota is configured and works on server. We have no problem with Ubuntu 14.04 clients, but with Ubuntu 15.04: $ quota -v Segmentation fault (core dumped) $ quota -vi $ quota -vA Segmentation fault (core dumped) $ apt-cache policy quota quota: Installed: 4.01-8 Candidate: 4.01-8 Version table: *** 4.01-8 0 500 http://fr.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status ** Affects: quota (Ubuntu) Importance: Undecided Status: New ** Attachment added: strace -o /tmp/trace.txt quota -vA https://bugs.launchpad.net/bugs/1459590/+attachment/4406030/+files/trace.txt -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to quota in Ubuntu. https://bugs.launchpad.net/bugs/1459590 Title: segfault on client with home on NFS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/quota/+bug/1459590/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1433444] Re: Thinkpad T550 touchscreen does not work
Shevek, who are you making that comment to? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1433444 Title: Thinkpad T550 touchscreen does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1433444/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451613] Re: Unity/compiz crashes when locking screen
I can't install debug symbols right now, but wanted to mention that I don't have light-locker installed either. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451613 Title: Unity/compiz crashes when locking screen To manage notifications about this bug go to: https://bugs.launchpad.net/unity/+bug/1451613/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1408963] Re: [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945 0000:03:00.0: BSM uCode verification failed at addr ...; wlan0: deauthenticating from... by local choice (Reaso
Similar on my old Acer Travelmate 5720 after an update from 14.04 (where I didn't have any issues with this lately): https://forum.ubuntuusers.de/topic/wlan-schmiert-immer-ab-nach-update- von-14-04-a/#post-7581108. This is in German, unfortunately, but I hope the console output there is still of some use. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1408963 Title: [Xbuntu 14.04, 14.10 and 15.04] Network manager stops working: iwl3945 :03:00.0: BSM uCode verification failed at addr ...; wlan0: deauthenticating from... by local choice (Reason: 3=DEAUTH_LEAVING), To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1408963/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1282867] Re: Frequent hang and render glitches in Xorg, caused by SNA
for what it worth, I was having the same issues using kernel 3.18.2-031802-generic (amd64) from http://kernel.ubuntu.com/~kernel-ppa/mainline/ I've updated to kernel 3.19.8-031908-generic (amd64) and I no longer get ERROR* gpu hanging too fast, banning or [drm] GPU HANG... Ronan -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1282867 Title: Frequent hang and render glitches in Xorg, caused by SNA To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1282867/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1455383] Re: grub-pc 2.02~beta2-9ubuntu1.1 failed to install/upgrade
$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done The following packages have been kept back: linux-headers-generic linux-signed-generic linux-signed-image-generic 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Setting up grub-pc (2.02~beta2-9ubuntu1.1) ... insmod: ERROR: could not load module part_gpt: No such file or directory dpkg: error processing package grub-pc (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of grub2: grub2 depends on grub-pc (= 2.02~beta2-9ubuntu1.1); however: Package grub-pc is not configured yet. dpkg: error processing package grub2 (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: grub-pc grub2 E: Sub-process /usr/bin/dpkg returned an error code (1) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1455383 Title: grub-pc 2.02~beta2-9ubuntu1.1 failed to install/upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1455383/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459618] [NEW] Incorrect package checksums for trusty-updates since this morning
Public bug reported: I am getting checksum mismatches on trusty-updates since this morning. It seems that the files were changed: $ wget -O- -o /dev/null http://archive.ubuntu.com/ubuntu/dists/trusty-updates/main/binary-amd64/ | sed -e 's/[^]*/ /g' Index of /ubuntu/dists/trusty-updates/main/binary-amd64 NameLast modifiedSize Parent Directory nbsp;- Packages.bz2 28-May-2015 10:23513K Packages.gz 28-May-2015 10:23650K Release 28-May-2015 10:23104 These are the expected MD5 hashes: $ wget -o /dev/null -O- http://archive.ubuntu.com/ubuntu/dists/trusty-updates/Release | egrep main/binary-amd64/Packages.'(gz|bz2)' | head -2 2684076da64123b17dd4370f381444a1 665944 main/binary-amd64/Packages.gz db2bb58fc4545ae77d0ad0850d3d07d0 525354 main/binary-amd64/Packages.bz2 Packages.gz appears to be wrong: $ wget -o /dev/null -O- http://archive.ubuntu.com/ubuntu/dists/trusty-updates/main/binary-amd64/Packages.gz | md5sum 407e592770cac05d3e27e7ae4425f0aa - But Packages.bz2 is correct: $ wget -o /dev/null -O- http://archive.ubuntu.com/ubuntu/dists/trusty-updates/main/binary-amd64/Packages.bz2 | md5sum db2bb58fc4545ae77d0ad0850d3d07d0 - Users may not be noticing because most of them are using bz2 compression, but MAAS fails on maas-import-pxe-files. The difference appears to be in the Phased-Update-Percentage values: @@ -74527,7 +74527,7 @@ Description-md5: 739e58e2989afe568092890f45df8b83 Bugs: https://bugs.launchpad.net/ubuntu/+filebug Origin: Ubuntu -Phased-Update-Percentage: 10 +Phased-Update-Percentage: 30 Supported: 5y Task: ubuntu-desktop, ubuntu-usb, edubuntu-desktop, edubuntu-usb with the Bz2 file having 30% versus Gz having 10%, so this looks like an incomplete file update/regeneration. ** Affects: ubuntu Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459618 Title: Incorrect package checksums for trusty-updates since this morning To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1459618/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1457369] Re: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel
Thanks Xiong, that fix works for me! (Tested against 3.19.0-19.19) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1457369 Title: kernel 3.19.0-18 breaks HDMI audio for snd_hda_intel To manage notifications about this bug go to: https://bugs.launchpad.net/system76/+bug/1457369/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1391175] Re: package munge 0.5.11-1.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: munge (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1391175 Title: package munge 0.5.11-1.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/munge/+bug/1391175/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459066] Re: linux-keystone: 3.13.0-29.45 -proposed tracker
All builds are complete, packages in this bug can be copied to -proposed. ** Changed in: kernel-sru-workflow/prepare-package Status: New = Fix Released ** Changed in: kernel-sru-workflow/promote-to-proposed Status: New = Confirmed ** Changed in: kernel-sru-workflow/package-testing Status: New = Confirmed ** Description changed: This bug is for tracking the version to be filled upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow kernel-stable-Prepare-package-start:Wednesday, 27. May 2015 02:00 UTC - kernel-stable-phase:Prepare - kernel-stable-phase-changed:Wednesday, 27. May 2015 02:00 UTC kernel-stable-master-bug:1458618 kernel-stable-Certification-testing-end:Thursday, 28. May 2015 06:01 UTC kernel-stable-Security-signoff-end:Thursday, 28. May 2015 06:01 UTC + kernel-stable-phase:CopyToProposed + kernel-stable-Prepare-package-end:Thursday, 28. May 2015 11:01 UTC + kernel-stable-Promote-to-proposed-start:Thursday, 28. May 2015 11:01 UTC + kernel-stable-phase-changed:Thursday, 28. May 2015 11:01 UTC -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459066 Title: linux-keystone: 3.13.0-29.45 -proposed tracker To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1459066/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1404344] Re: GNOME Clocks window is transparent
also on ubuntu 15.04 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1404344 Title: GNOME Clocks window is transparent To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-clocks/+bug/1404344/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456783] Re: Please add apparmor profile
** Changed in: inspircd (Ubuntu) Status: New = Opinion ** Changed in: inspircd (Ubuntu) Status: Opinion = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456783 Title: Please add apparmor profile To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/inspircd/+bug/1456783/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459600] [NEW] libxl guest fails to start due to incorrect emulator setting
You have been subscribed to a public bug: Recent versions of libvirt are using the contents of the emulator option in the devices section. For a while we were using qemu-dm which was correct when the deprecated xm toolstack was in use. Since the option was not really used, there was no need to change this and using the xl stack (through libxl) was automatically picking up the right qemu path. But now we have to be correct. Upstream assumes a Xen specific binary and path which will at some point be provided through the pkg-config mechanism by libxen-dev. This is not needed for Deabian/Ubuntu because we make use of the qemu binary provided by the qemu package. So we only need to change two things (and they are not upstream-able because they are special): 1. for new configs always use /usr/bin/qemu-system-i386 2. when loading old configs replace qemu-dm by the new path ** Affects: libvirt (Ubuntu) Importance: High Assignee: Stefan Bader (smb) Status: Triaged -- libxl guest fails to start due to incorrect emulator setting https://bugs.launchpad.net/bugs/1459600 You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1459121] Re: Screen doesn't wake up when on minimum brightness
I'll check this, I had this as autoadjust unless I now i put this at maximum (with autoadjust) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459121 Title: Screen doesn't wake up when on minimum brightness To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1459121/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459600] [NEW] libxl guest fails to start due to incorrect emulator setting
Public bug reported: Recent versions of libvirt are using the contents of the emulator option in the devices section. For a while we were using qemu-dm which was correct when the deprecated xm toolstack was in use. Since the option was not really used, there was no need to change this and using the xl stack (through libxl) was automatically picking up the right qemu path. But now we have to be correct. Upstream assumes a Xen specific binary and path which will at some point be provided through the pkg-config mechanism by libxen-dev. This is not needed for Deabian/Ubuntu because we make use of the qemu binary provided by the qemu package. So we only need to change two things (and they are not upstream-able because they are special): 1. for new configs always use /usr/bin/qemu-system-i386 2. when loading old configs replace qemu-dm by the new path ** Affects: libvirt (Ubuntu) Importance: High Assignee: Stefan Bader (smb) Status: Triaged ** Package changed: ubuntu = libvirt (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. https://bugs.launchpad.net/bugs/1459600 Title: libxl guest fails to start due to incorrect emulator setting To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1459600/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1348890] Re: Asus UX32LN: Brightness keys Fn+F5 and Fn+F6 don't generate evdev event
This bug affects all current ASUS UX305FA models, tested with BIOS 206 and 207 and Kernel 3.19 and up to Kernel 4.0.4 from mainline. Kernel parameters acpi_osi= or acpi_backlight=intel do not work at all, acpi_osi only disables the WMI control (possibly another bug). How are these ACPI events generated? If the BIOS does not supply the event, maybe it must be enabled with some control sequence? (acpi_listen mostly doesn't say anything if pressing Fn+F-keys.) I saw that e.g. for newer hybrid touchpads, you need to initialize the device with an ACPI command so that it will either work in PS2 or I2C mode. Otherwise it will either be off or the mode is not what I wanted. Maybe this works the same way here and we only have to enable these key events? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1348890 Title: Asus UX32LN: Brightness keys Fn+F5 and Fn+F6 don't generate evdev event To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1348890/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459600] [NEW] libxl guest fails to start due to incorrect emulator setting
Public bug reported: Recent versions of libvirt are using the contents of the emulator option in the devices section. For a while we were using qemu-dm which was correct when the deprecated xm toolstack was in use. Since the option was not really used, there was no need to change this and using the xl stack (through libxl) was automatically picking up the right qemu path. But now we have to be correct. Upstream assumes a Xen specific binary and path which will at some point be provided through the pkg-config mechanism by libxen-dev. This is not needed for Deabian/Ubuntu because we make use of the qemu binary provided by the qemu package. So we only need to change two things (and they are not upstream-able because they are special): 1. for new configs always use /usr/bin/qemu-system-i386 2. when loading old configs replace qemu-dm by the new path ** Affects: libvirt (Ubuntu) Importance: High Assignee: Stefan Bader (smb) Status: Triaged ** Package changed: ubuntu = libvirt (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459600 Title: libxl guest fails to start due to incorrect emulator setting To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1459600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459121] Re: Screen doesn't wake up when on minimum brightness
I checked it, if i turn the brightness to manual at minimum screen cant woke up but when it happened i had this at auto brightness adjust. It didn't happen before... Thanks for the answer. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459121 Title: Screen doesn't wake up when on minimum brightness To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1459121/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459235] Re: Google Address book: Unable to open address book
Same for me. In the error message details you can see that it tries to redirect to https://developers.google.com/accounts/docs/AuthForInstalledApps where you can read: ClientLogin has been officially deprecated since April 20, 2012 and is now no longer available. Requests to ClientLogin will fail with a HTTP 404 response. We encourage you to migrate to OAuth 2.0 as soon as possible. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459235 Title: Google Address book: Unable to open address book To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1459235/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1450790] Re: Phone with an APN specifying Username/Password, not re-connecting to mobile data until rebooting
My operator has both username and password defined -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1450790 Title: Phone with an APN specifying Username/Password, not re-connecting to mobile data until rebooting To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1450790/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459630] [NEW] natural logarithm: ln(0.5) does not work
Public bug reported: When i type ln(0.5) in the calculator it just says: *** ERROR OCCURRED IN LNS, NEWTON ITERATION NOT CONVERGING PROPERLY *** This is for version 3.14.1 in ubuntu 15.04 ** Affects: gnome-calculator (Ubuntu) Importance: Undecided Status: New ** Description changed: - When i type ln(0.5) in the calculator it just says: *** ERROR OCCURRED - IN LNS, NEWTON ITERATION NOT CONVERGING PROPERLY *** + When i type ln(0.5) in the calculator it just says: + *** ERROR OCCURRED IN LNS, NEWTON ITERATION NOT CONVERGING PROPERLY *** + + This is for version 3.14.1 in ubuntu 15.04 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459630 Title: natural logarithm: ln(0.5) does not work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-calculator/+bug/1459630/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459632] [NEW] Failures on staging in ubuntuuitoolkit.tests.components.test_textinput
Public bug reported: At one point many tests from ubuntuuitoolkit.tests.components.test_textinput and ubuntuuitoolkit.tests.custom_proxy_objects.test_textfield started failing in staging. ubuntuuitoolkit.tests.components.test_textinput.CaretTextInputTestCase.test_caret_hidden_if_empty(header): 17:15:09.899 INFO _launcher:373 - Attempting to launch application '/usr/lib/arm-linux-gnueabihf/ubuntu-ui-toolkit/launcher' with arguments '-I /usr/lib/modules /usr/lib/python3/dist-packages/ubuntuuitoolkit/tests/components/test_textinput.header.qml --desktop_file_hint=/home/phablet/.local/share/applications/tmp0b42to5n.desktop -touch' as a normal process 17:15:09.916 INFO _launcher:431 - Launching process: ['/usr/lib/arm-linux-gnueabihf/ubuntu-ui-toolkit/launcher', '-testability', '-I', '/usr/lib/modules', '/usr/lib/python3/dist-packages/ubuntuuitoolkit/tests/components/test_textinput.header.qml', '--desktop_file_hint=/home/phablet/.local/share/applications/tmp0b42to5n.desktop', '-touch'] 17:15:13.955 DEBUG _common:45 - Moving to object's globalRect coordinates. 17:15:13.956 DEBUG _uinput:485 - Tapping at: 438,121 17:15:30.944 INFO _launcher:544 - waiting for process to exit. 17:15:30.945 INFO _launcher:567 - Killing process 12693 }}} Traceback (most recent call last): File /usr/lib/python3/dist-packages/ubuntuuitoolkit/tests/components/test_textinput.py, line 78, in test_caret_hidden_if_empty self._assert_not_visible(objectName=cursorName) File /usr/lib/python3/dist-packages/ubuntuuitoolkit/base.py, line 95, in _assert_not_visible self.assertThat(object.visible, Eventually(Equals(False))) File /usr/lib/python3/dist-packages/testtools/testcase.py, line 423, in assertThat raise mismatch_error testtools.matchers._impl.MismatchError: After 10.0 seconds test on QQuickImage.visible failed: False != dbus.Boolean(True, variant_level=1) ** Affects: ubuntu-ui-toolkit (Ubuntu) Importance: Critical Assignee: Christian Dywan (kalikiana) Status: In Progress -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459632 Title: Failures on staging in ubuntuuitoolkit.tests.components.test_textinput To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-ui-toolkit/+bug/1459632/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1436497] Re: Fails to start from kubuntu live session with failed to remove /run/udisks2/inhibit-polkit
This happens with the regular Ubuntu too. Julien's workaround works for me too. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1436497 Title: Fails to start from kubuntu live session with failed to remove /run/udisks2/inhibit-polkit To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1436497/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456591] Re: ubuntu-mate-artwork 0.4.8 bug fix release [debdiff attached]
That's confusing - you could rename it. :) Uploading anyway. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456591 Title: ubuntu-mate-artwork 0.4.8 bug fix release [debdiff attached] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1456591/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459595] Re: package libuuid1:i386 2.25.2-4ubuntu2 failed to install/upgrade: package libuuid1:i386 is already installed and configured
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459595 Title: package libuuid1:i386 2.25.2-4ubuntu2 failed to install/upgrade: package libuuid1:i386 is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1459595/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1438115] Re: Music App: Sometimes the length of the song is displayed as 0:00
This issue still could be reproduced on arale/vivid r4 sometimes, and sometimes the length is displayed as 0:00 just for the first 1~2 seconds, then actual length will shown. $ system-image-cli -i current build number: 4 device name: arale channel: ubuntu-touch/rc-proposed/meizu.en last update: 2015-05-28 05:26:35 version version: 4 version ubuntu: 20150527 version device: 20150522-a851049 version custom: 20150526-719-5-24 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1438115 Title: Music App: Sometimes the length of the song is displayed as 0:00 To manage notifications about this bug go to: https://bugs.launchpad.net/media-hub/+bug/1438115/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459603] [NEW] libxl: Domain verification on edit fails with Extra element os in interleave
Public bug reported: Error reporting for XML validation is hopeless. What causes this is the fact that for HVM guests we have a loader element which is set to hvmloader. But upstream wants this to be an absolute path to the binary. To make things a bit more funny, the XML validation is only enabled by default for edit, not create. We need to replace hvmloader in the config by the full path, which is a bit complicated because the binary is provided in a versioned subdirectory. Since libvirt is only compiled against *one* version, we always have to try replacing older paths by newer ones as well as options without path by the current full path. To help with this upstream libvirt started to set LIBXL_FIRMWARE_DIR through dpk-config, but the current Xen (4.5) does not provide a xenlight.pc file. So we need to ensure the value is set by other means and then add code to change paths when post processing the configs. ** Affects: libvirt (Ubuntu) Importance: Medium Assignee: Stefan Bader (smb) Status: Triaged -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459603 Title: libxl: Domain verification on edit fails with Extra element os in interleave To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1459603/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459603] [NEW] libxl: Domain verification on edit fails with Extra element os in interleave
Public bug reported: Error reporting for XML validation is hopeless. What causes this is the fact that for HVM guests we have a loader element which is set to hvmloader. But upstream wants this to be an absolute path to the binary. To make things a bit more funny, the XML validation is only enabled by default for edit, not create. We need to replace hvmloader in the config by the full path, which is a bit complicated because the binary is provided in a versioned subdirectory. Since libvirt is only compiled against *one* version, we always have to try replacing older paths by newer ones as well as options without path by the current full path. To help with this upstream libvirt started to set LIBXL_FIRMWARE_DIR through dpk-config, but the current Xen (4.5) does not provide a xenlight.pc file. So we need to ensure the value is set by other means and then add code to change paths when post processing the configs. ** Affects: libvirt (Ubuntu) Importance: Medium Assignee: Stefan Bader (smb) Status: Triaged -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. https://bugs.launchpad.net/bugs/1459603 Title: libxl: Domain verification on edit fails with Extra element os in interleave To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1459603/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1459235] Re: Google Address book: Unable to open address book
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: evolution (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459235 Title: Google Address book: Unable to open address book To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1459235/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451911] Re: cheese doesn't work: cluttervideosink missing
** Changed in: cheese (Debian) Status: Unknown = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451911 Title: cheese doesn't work: cluttervideosink missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cheese/+bug/1451911/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1430339] Re: fc-match Ryumin should return Mincho(serif) font in ja locale
** Changed in: ubuntu-translations Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1430339 Title: fc-match Ryumin should return Mincho(serif) font in ja locale To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-translations/+bug/1430339/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456597] Re: ubuntu-mate-settings 0.4.5 release [debdiff attached]
The packages that have overlays do not have system configuration capabilities. Previously I was putting the configs into /etc/skel but some sponsors were uncomfortable with that, and reasonably so, so I made the overlays. The overlays only work in a MATE sessions and will not overwrite pre-existing configuration. This overlay approach was previously approved by a sponsor. I am working withthe upstreams to add system configuration to the applications. Again the desktop files onlh affect the MATE session. Some are now hidden in MATE because they are directly integrated or the categorisation has been changed slightly to remove duplicate menu entries or correct the placement in the System menus. Again, I working with upstreams to change this where possible. ** Changed in: ubuntu-mate-settings (Ubuntu) Status: Incomplete = New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456597 Title: ubuntu-mate-settings 0.4.5 release [debdiff attached] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1456597/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459593] [NEW] package libncurses5:i386 5.9+20140712-2ubuntu2 failed to install/upgrade: package libncurses5:i386 is already installed and configured
Public bug reported: I was downloading 'wine' and 'software updates' wanted to update also. So I said 'yes'. So both were trying to download at the same time. Machine hung. Ubunty 15.04 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libncurses5:i386 5.9+20140712-2ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 AptdaemonVersion: 1.1.1+bzr982-0ubuntu3 Architecture: amd64 Date: Thu May 28 10:15:16 2015 DuplicateSignature: package:libncurses5:i386:5.9+20140712-2ubuntu2:package libncurses5:i386 is already installed and configured ErrorMessage: package libncurses5:i386 is already installed and configured InstallationDate: Installed on 2015-05-27 (0 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: dpkg Title: package libncurses5:i386 5.9+20140712-2ubuntu2 failed to install/upgrade: package libncurses5:i386 is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: dpkg (Ubuntu) Importance: Undecided Status: New ** Tags: already-installed apport-package i386 vivid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459593 Title: package libncurses5:i386 5.9+20140712-2ubuntu2 failed to install/upgrade: package libncurses5:i386 is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1459593/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459590] [NEW] segfault on client with home on NFS
Public bug reported: I use last version (4.01-8) on Vivid. It is a fresh update, before that with same config, I had no error on Ubuntu 14.04. Server is on Centos 6 and client is now Ubuntu 15.04. Quota is configured and works on server. We have no problem with Ubuntu 14.04 clients, but with Ubuntu 15.04: $ quota -v Segmentation fault (core dumped) $ quota -vi $ quota -vA Segmentation fault (core dumped) $ apt-cache policy quota quota: Installed: 4.01-8 Candidate: 4.01-8 Version table: *** 4.01-8 0 500 http://fr.archive.ubuntu.com/ubuntu/ vivid/main amd64 Packages 100 /var/lib/dpkg/status ** Affects: quota (Ubuntu) Importance: Undecided Status: New ** Attachment added: strace -o /tmp/trace.txt quota -vA https://bugs.launchpad.net/bugs/1459590/+attachment/4406030/+files/trace.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459590 Title: segfault on client with home on NFS To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/quota/+bug/1459590/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459591] [NEW] Keyboard stays US after french selection in Try mode
Public bug reported: Hi, When starting the Vivid 15.04 livecd (on a usb key), I don't change keymap at grub time, just let it boot, then it ask me if I want to install or to try ubuntu. If I select Try ubuntu, after selecting French, it still keep using US keymap. I need to change the Text Entry Setting to get it work as expected. I think it must be automatically switched to default country keymap. If selecting install, the text entry remains EN-US, but ubiquity change its own keymap, and the keyboard works as expected inside ubiquity after keyboard selection. If selecting french language at grub time and select 'try ubuntu', keyboard is correctly setup. ** Affects: casper (Ubuntu) Importance: Undecided Status: New ** Description changed: Hi, - When starting the livecd (on a usb key), I don't change keymap at grub - time, just let it boot, then it ask me if I want to install or to try - ubuntu. If I select Try ubuntu, after selecting French, it still keep - using US keymap. I need to change the Text Entry Setting. + When starting the Vivid 15.04 livecd (on a usb key), I don't change + keymap at grub time, just let it boot, then it ask me if I want to + install or to try ubuntu. If I select Try ubuntu, after selecting + French, it still keep using US keymap. I need to change the Text Entry + Setting to get it work as expected. I think it must be automatically switched to default country keymap. If selecting install, the text entry remains EN-US, but ubiquity change - its own keymap, and the keyboard works as expected inside ubiquity. + its own keymap, and the keyboard works as expected inside ubiquity after + keyboard selection. If selecting french language at grub time and select 'try ubuntu', keyboard is correctly setup. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459591 Title: Keyboard stays US after french selection in Try mode To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/casper/+bug/1459591/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1457548] Re: Does not work with Ubuntu 15.04 and gnome 3.14.4
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: touchegg (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1457548 Title: Does not work with Ubuntu 15.04 and gnome 3.14.4 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/touchegg/+bug/1457548/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459595] [NEW] package libuuid1:i386 2.25.2-4ubuntu2 failed to install/upgrade: package libuuid1:i386 is already installed and configured
Public bug reported: Ubuntu 15.04 ProblemType: Package DistroRelease: Ubuntu 15.04 Package: libuuid1:i386 2.25.2-4ubuntu2 ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3 Uname: Linux 3.19.0-15-generic x86_64 NonfreeKernelModules: nvidia ApportVersion: 2.17.2-0ubuntu1 AptdaemonVersion: 1.1.1+bzr982-0ubuntu3 Architecture: amd64 Date: Thu May 28 10:15:16 2015 DuplicateSignature: package:libuuid1:i386:2.25.2-4ubuntu2:package libuuid1:i386 is already installed and configured ErrorMessage: package libuuid1:i386 is already installed and configured InstallationDate: Installed on 2015-05-27 (0 days ago) InstallationMedia: Ubuntu 15.04 Vivid Vervet - Release amd64 (20150422) PackageArchitecture: i386 RelatedPackageVersions: dpkg 1.17.25ubuntu1 apt 1.0.9.7ubuntu4 SourcePackage: dpkg Title: package libuuid1:i386 2.25.2-4ubuntu2 failed to install/upgrade: package libuuid1:i386 is already installed and configured UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: dpkg (Ubuntu) Importance: Undecided Status: New ** Tags: already-installed apport-package i386 vivid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459595 Title: package libuuid1:i386 2.25.2-4ubuntu2 failed to install/upgrade: package libuuid1:i386 is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1459595/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459121] Re: phone unlock screen
This can be reproduced by setting screen brightness to a minimum and turning off the screen. Also happens on auto brightness and when being in a dark place. Seems the minimum supplied power for the display needs to be increased for tiny bit. ** Also affects: canonical-devices-system-image Importance: Undecided Status: New ** Changed in: unity8 (Ubuntu) Status: New = Invalid ** Summary changed: - phone unlock screen + Screen doesn't wake up when on minimum brightness -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459121 Title: Screen doesn't wake up when on minimum brightness To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1459121/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451448] Re: bzr fails to build on vivid (release) and trusty (test-rebuild only)
Sorry for the reply delay :-/ I've been able to reproduce on vivid. These tests are racy (yet another occurrence of running a TCP server and client in the same process (different threads)). Out of the ~800 http tests, those two ones are the simplest: they connect to an http server that always reply with a 'Bad status' message and close the connection. Running 'bzr selftest --parallel=fork -v -s bt.test_http.TestBadStatusServer' repeatedly, I can: - see the test pass, - see the test fail as reported, - see the test hang Definitely a race :-/ This can be fixed in two ways: - run the server in a separate process, - identify the race more precisely and fix it. The former requires some tedious work, the later requires some deep investigation :-/ I've sent a patch to debian to disable these tests until they are properly fixed. We don't lose significant coverage doing so (pqm will still run them to gate lp:bzr). -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451448 Title: bzr fails to build on vivid (release) and trusty (test-rebuild only) To manage notifications about this bug go to: https://bugs.launchpad.net/bzr/+bug/1451448/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459434] Re: devhelp now requires webkit2gtk, which is not in main
This bug was fixed in the package devhelp - 3.16.1-1ubuntu1 --- devhelp (3.16.1-1ubuntu1) wily; urgency=medium * Revert until this is dropped to universe or webkit2gtk is main: LP: #1459434 - debian/control.in: + Switch to libwebkit2gtk-4.0-dev. + Break anjuta 2:3.14.0-2 to prevent anjuta from mixing libwebkit2gtk-3.0 and libwebkit2gtk-4.0. -- Jackson Doak nosk...@ubuntu.com Thu, 28 May 2015 06:41:15 +1000 ** Changed in: devhelp (Ubuntu) Status: New = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459434 Title: devhelp now requires webkit2gtk, which is not in main To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/devhelp/+bug/1459434/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1450790] Re: Phone with an APN specifying Username/Password, not re-connecting to mobile data until rebooting
on Meizu device with NM 0.9.10.0-4ubuntu15.1.1 I still can't get mobile data connection after I enable/disable flight mode. Disabling and reenabling mobile data doesn't help. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1450790 Title: Phone with an APN specifying Username/Password, not re-connecting to mobile data until rebooting To manage notifications about this bug go to: https://bugs.launchpad.net/canonical-devices-system-image/+bug/1450790/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456881] Re: Some touchpads' right button doesn't work under I2C mode, need support of clickpads
the other patch has been submitted to kernel-team@ -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456881 Title: Some touchpads' right button doesn't work under I2C mode, need support of clickpads To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1456881/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1454207] Re: Samsung 730U3E LCD backlight brightness control doesn't work
Kernel version reverse-bisect showed that it works with 4.0rc1 and higher. I will do a commit reverse-bisect when I have time. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1454207 Title: Samsung 730U3E LCD backlight brightness control doesn't work To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1454207/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1383213] Re: [Dash] Categorydropbox touch state
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: unity8 (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1383213 Title: [Dash] Categorydropbox touch state To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-ux/+bug/1383213/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1456597] Re: ubuntu-mate-settings 0.4.5 release [debdiff attached]
The overlaying approach is quite disturbing - we try to avoid packages poking in users' directories. Why is it necessary - can you not prepend a directory to XDG_CONFIG_DIRS and use a system location? Generally things should be looking (or copying from) there. What have you done with those desktop files? How do you plan on keeping up to date with changes in the packages they come from? ** Changed in: ubuntu-mate-settings (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1456597 Title: ubuntu-mate-settings 0.4.5 release [debdiff attached] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-mate/+bug/1456597/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1459593] Re: package libncurses5:i386 5.9+20140712-2ubuntu2 failed to install/upgrade: package libncurses5:i386 is already installed and configured
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1459593 Title: package libncurses5:i386 5.9+20140712-2ubuntu2 failed to install/upgrade: package libncurses5:i386 is already installed and configured To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/1459593/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1397516] Re: Evince prints blank pages with attached PDF
** Changed in: evince Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1397516 Title: Evince prints blank pages with attached PDF To manage notifications about this bug go to: https://bugs.launchpad.net/evince/+bug/1397516/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451911] Re: cheese doesn't work: cluttervideosink missing
** Bug watch added: Debian Bug tracker #729253 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=729253 ** Also affects: cheese (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=729253 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451911 Title: cheese doesn't work: cluttervideosink missing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/cheese/+bug/1451911/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1451021] Re: kio-audiocd : no way to choose the format/bitrate
** Package changed: kwallet-kf5 (Ubuntu) = audiocd-kio (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451021 Title: kio-audiocd : no way to choose the format/bitrate To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/audiocd-kio/+bug/1451021/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1455598] Re: connecting 2x 4k displays in ubuntu 15.04 with daisy chain displayport (MST)
D, thank you for reporting this and helping make Ubuntu better. However, your crash report is manually attached. Please follow these instructions to have apport report a new bug about your crash that can be dealt with by the automatic retracer. First, execute at a terminal: cd /var/crash sudo rm * ; sudo apt-get update sudo apt-get -y upgrade sudo service apport start force_start=1 If you are running the Ubuntu Stable Release you might need to enable apport in /etc/default/apport and restart. Now reproduce the crash, then open your file manager, navigate to your /var/crash directory and open the crash report you wish to submit. If this fails you will have to open a terminal and file your report with 'ubuntu-bug /var/crash/_my_crash_report.crash' where _my_crash_report.crash is the crash you would like to report. If you get an error that you aren't allowed to access this report you will have to file it with 'sudo ubuntu-bug /var/crash/_my_crash_report.crash'. If you run the command against the crash report and a window pops up asking you to report this, but then never opens a new report, you would be affected by https://bugs.launchpad.net/ubuntu/+source/apport/+bug/994921 . In order to WORKAROUND this, one would need to open the following file via a command line: sudo nano /etc/apport/crashdb.conf and comment out the line: 'problem_types': ['Bug', 'Package'], by changing it to: # 'problem_types': ['Bug', 'Package'], Save, close, and try to file the crash report again via: ubuntu-bug /var/crash/_my_crash_report.crash I'm closing this bug report since the process outlined above will automatically open a new bug report which can then dealt with more efficiently. Please feel free to subscribe me to this new report. Also, please do not attach your crash report manually to this report and reopen it. Thank you for your understanding. Helpful bug reporting tips: https://wiki.ubuntu.com/ReportingBugs ** Changed in: xorg (Ubuntu) Importance: Medium = Undecided ** Changed in: xorg (Ubuntu) Status: New = Invalid ** Attachment removed: _usr_bin_Xorg.0.crash.7z https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455598/+attachment/4405952/+files/_usr_bin_Xorg.0.crash.7z -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1455598 Title: connecting 2x 4k displays in ubuntu 15.04 with daisy chain displayport (MST) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1455598/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1455920] Re: settings from saved config files are not loaded correctly
I'm marking as Incomplete so that sponsors don't look at this while we're waiting for upstream reviews. If we don't hear back in a couple of weeks (or so), please reset to Confirmed/Triaged and someone can upload into Ubuntu. Thanks for your fix! :) ** Changed in: qmidiroute (Ubuntu) Status: Triaged = Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1455920 Title: settings from saved config files are not loaded correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qmidiroute/+bug/1455920/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1424418] Re: Work area files mistakenly included in orig tarball
OK, I'm closing this bug then. Reopen if you *really* disagree. Thanks! ** Changed in: ecere-sdk (Ubuntu) Status: New = Won't Fix -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1424418 Title: Work area files mistakenly included in orig tarball To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ecere-sdk/+bug/1424418/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
