[Bug 1917620] Re: failed to install libffi-dev package
Hi Colin, thanks for your comment, could you help me in figurning out which one I should rather have among vivid, xenial and artful? or is it none are needed? thanks again -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1917620 Title: failed to install libffi-dev package To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/libffi/+bug/1917620/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803135] Re: home WLAN does not work with Ubuntu 16.04 on Thinkpad
Hello, thanks for the reply. well, I had loads of issue in installing a stable working Ubuntu in Thinkpad and therefore also I went through series of problem fixing solutions. In short, there is a higher chance that I played around with Grub, but can not confirm. Besides, I am not much into Grub settings. Please find the info of my Grub, and guide me further which one I have got and which one I should have [1]. Also, one more important requirement for me is that I am running my work-windows 10 in Oracle VM, that should also be compatible with the Grub. Many thanks, pooja [1] ** pooja@X1-Carbon-6:~$ grub-install -v grub-install: info: executing modprobe efivars 2>/dev/null. grub-install: info: Looking for /sys/firmware/efi ... grub-install: info: ...found. Installing for x86_64-efi platform. grub-install: info: cannot open `/boot/grub/device.map': No such file or directory. grub-install: info: /dev/nvme0n1p1 is not present. grub-install: info: Looking for /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1 is a parent of /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1p1 starts from 2048. grub-install: info: opening the device hostdisk//dev/nvme0n1. grub-install: info: drive = 0. grub-install: warning: disk does not exist, so falling back to partition device /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1p1 is present. grub-install: info: Looking for /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1 is a parent of /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1p1 starts from 2048. grub-install: info: opening the device hostdisk//dev/nvme0n1. grub-install: info: drive = 0. grub-install: warning: disk does not exist, so falling back to partition device /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1p1 is present. grub-install: info: Looking for /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1 is a parent of /dev/nvme0n1p1. grub-install: info: /dev/nvme0n1p1 starts from 2048. grub-install: info: opening the device hostdisk//dev/nvme0n1. grub-install: info: drive = 0. grub-install: warning: disk does not exist, so falling back to partition device /dev/nvme0n1p1. grub-install: info: drive = 1. grub-install: error: disk `hostdisk//dev/nvme0n1p1' not found. pooja@X1-Carbon-6:~$ dpkg -l | grep grub | grep ii ii grub-common 2.02~beta2-36ubuntu3.19 amd64GRand Unified Bootloader (common files) ii grub-customizer 5.1.0-0ubuntu1~ppa1x amd64Grub Customizer - A graphical Grub2/BURG configuration application ii grub-efi-amd64 2.02~beta2-36ubuntu3.19 amd64GRand Unified Bootloader, version 2 (EFI-AMD64 version) ii grub-efi-amd64-bin 2.02~beta2-36ubuntu3.19 amd64GRand Unified Bootloader, version 2 (EFI-AMD64 binaries) ii grub-efi-amd64-signed 1.66.19+2.02~beta2-36ubuntu3.19 amd64GRand Unified Bootloader, version 2 (EFI-AMD64 version, signed) ii grub2-common 2.02~beta2-36ubuntu3.19 amd64GRand Unified Bootloader (common files for version 2) pooja@X1-Carbon-6:~$ ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803135 Title: home WLAN does not work with Ubuntu 16.04 on Thinkpad To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803135] Re: home WLAN does not work with Ubuntu 16.04 on Thinkpad
Thanks Anthony, I could try doing that. In case you have the instructions/help-page for installing v4.15, please let me know. Thanks again, pooja -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803135 Title: home WLAN does not work with Ubuntu 16.04 on Thinkpad To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803135] Re: home WLAN does not work with Ubuntu 16.04 on Thinkpad
apport information ** Tags added: apport-collected xenial ** Description changed: Hello, I am working on Ubuntu 16.04 with the following details [1], which is a fresh installation on Thinkpad Carbon laptop. Since day 1, I could not manage to use my home WLAN for things like wget, update packages etc. Here is one example trying to install some package using my home WLAN [2], and instant output of trying to install the same package after switching to my Mobile data [3]. I do not see a reason why it should happen, specially when this works for my other personal laptop (DELL). Any suggestions to dig it further is appreciated. Many thanks, [1] ** $ uname -a Linux X1-Carbon-6 4.19.0-041900rc4-lowlatency #201809162031 SMP PREEMPT Sun Sep 16 20:36:16 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [2] * $ sudo apt-get install python3-venv Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libgsoap8 libvncserver1 linux-headers-4.15.0-29 linux-headers-4.15.0-29-generic linux-headers-4.4.0-135 linux-headers-4.4.0-135-generic linux-image-4.15.0-29-generic linux-image-4.4.0-135-generic linux-image-extra-4.4.0-135-generic linux-modules-4.15.0-29-generic linux-modules-extra-4.15.0-29-generic linux-signed-image-4.4.0-135-generic Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: python3.5-venv The following NEW packages will be installed: python3-venv python3.5-venv 0 upgraded, 2 newly installed, 0 to remove and 8 not upgraded. Need to get 7.104 B of archives. After this operation, 39,9 kB of additional disk space will be used. Do you want to continue? [Y/n] y Err:1 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 Temporary failure resolving 'de.archive.ubuntu.com' Err:2 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 python3-venv amd64 3.5.1-3 Temporary failure resolving 'de.archive.ubuntu.com' Err:1 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 Temporary failure resolving 'de.archive.ubuntu.com' E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/universe/p/python3.5/python3.5-venv_3.5.2-2ubuntu0~16.04.4_amd64.deb Temporary failure resolving 'de.archive.ubuntu.com' E: Failed to fetch http://de.archive.ubuntu.com/ubuntu/pool/universe/p/python3-defaults/python3-venv_3.5.1-3_amd64.deb Temporary failure resolving 'de.archive.ubuntu.com' E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? [3] $ sudo apt-get install python3-venv Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libgsoap8 libvncserver1 linux-headers-4.15.0-29 linux-headers-4.15.0-29-generic linux-headers-4.4.0-135 linux-headers-4.4.0-135-generic linux-image-4.15.0-29-generic linux-image-4.4.0-135-generic linux-image-extra-4.4.0-135-generic linux-modules-4.15.0-29-generic linux-modules-extra-4.15.0-29-generic linux-signed-image-4.4.0-135-generic Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: python3.5-venv The following NEW packages will be installed: python3-venv python3.5-venv 0 upgraded, 2 newly installed, 0 to remove and 8 not upgraded. Need to get 7.104 B of archives. After this operation, 39,9 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://de.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 [5.998 B] Get:2 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 python3-venv amd64 3.5.1-3 [1.106 B] Fetched 7.104 B in 0s (22,3 kB/s) Selecting previously unselected package python3.5-venv. (Reading database ... 466428 files and directories currently installed.) Preparing to unpack .../python3.5-venv_3.5.2-2ubuntu0~16.04.4_amd64.deb ... Unpacking python3.5-venv (3.5.2-2ubuntu0~16.04.4) ... Selecting previously unselected package python3-venv. Preparing to unpack .../python3-venv_3.5.1-3_amd64.deb ... Unpacking python3-venv (3.5.1-3) ... Processing triggers for man-db (2.7.5-1) ... Setting up python3.5-venv (3.5.2-2ubuntu0~16.04.4) ... Setting up python3-venv (3.5.1-3) ... pooja@X1-Carbon-6:~/Documents/sva/projekten$ + --- + ApportVersion: 2.20.1-0ubuntu2.18 + Architecture: amd64 + CurrentDesktop: Unity + DistroRelease: Ubuntu 16.04 + InstallationDate: Installed on 2018-09-11 (63 days ago) + InstallationMedia: Ubuntu 16.04.5 LTS "Xenial Xerus" -
[Bug 1803135] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1803135/+attachment/5212301/+files/ProcEnviron.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803135 Title: home WLAN does not work with Ubuntu 16.04 on Thinkpad To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803135/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1803135] [NEW] home WLAN does not work with Ubuntu 16.04 on Thinkpad
Public bug reported: Hello, I am working on Ubuntu 16.04 with the following details [1], which is a fresh installation on Thinkpad Carbon laptop. Since day 1, I could not manage to use my home WLAN for things like wget, update packages etc. Here is one example trying to install some package using my home WLAN [2], and instant output of trying to install the same package after switching to my Mobile data [3]. I do not see a reason why it should happen, specially when this works for my other personal laptop (DELL). Any suggestions to dig it further is appreciated. Many thanks, [1] ** $ uname -a Linux X1-Carbon-6 4.19.0-041900rc4-lowlatency #201809162031 SMP PREEMPT Sun Sep 16 20:36:16 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [2] * $ sudo apt-get install python3-venv Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libgsoap8 libvncserver1 linux-headers-4.15.0-29 linux-headers-4.15.0-29-generic linux-headers-4.4.0-135 linux-headers-4.4.0-135-generic linux-image-4.15.0-29-generic linux-image-4.4.0-135-generic linux-image-extra-4.4.0-135-generic linux-modules-4.15.0-29-generic linux-modules-extra-4.15.0-29-generic linux-signed-image-4.4.0-135-generic Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: python3.5-venv The following NEW packages will be installed: python3-venv python3.5-venv 0 upgraded, 2 newly installed, 0 to remove and 8 not upgraded. Need to get 7.104 B of archives. After this operation, 39,9 kB of additional disk space will be used. Do you want to continue? [Y/n] y Err:1 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 Temporary failure resolving 'de.archive.ubuntu.com' Err:2 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 python3-venv amd64 3.5.1-3 Temporary failure resolving 'de.archive.ubuntu.com' Err:1 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 Temporary failure resolving 'de.archive.ubuntu.com' E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/universe/p/python3.5/python3.5-venv_3.5.2-2ubuntu0~16.04.4_amd64.deb Temporary failure resolving 'de.archive.ubuntu.com' E: Failed to fetch http://de.archive.ubuntu.com/ubuntu/pool/universe/p/python3-defaults/python3-venv_3.5.1-3_amd64.deb Temporary failure resolving 'de.archive.ubuntu.com' E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? [3] $ sudo apt-get install python3-venv Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: libgsoap8 libvncserver1 linux-headers-4.15.0-29 linux-headers-4.15.0-29-generic linux-headers-4.4.0-135 linux-headers-4.4.0-135-generic linux-image-4.15.0-29-generic linux-image-4.4.0-135-generic linux-image-extra-4.4.0-135-generic linux-modules-4.15.0-29-generic linux-modules-extra-4.15.0-29-generic linux-signed-image-4.4.0-135-generic Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: python3.5-venv The following NEW packages will be installed: python3-venv python3.5-venv 0 upgraded, 2 newly installed, 0 to remove and 8 not upgraded. Need to get 7.104 B of archives. After this operation, 39,9 kB of additional disk space will be used. Do you want to continue? [Y/n] y Get:1 http://de.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 python3.5-venv amd64 3.5.2-2ubuntu0~16.04.4 [5.998 B] Get:2 http://de.archive.ubuntu.com/ubuntu xenial/universe amd64 python3-venv amd64 3.5.1-3 [1.106 B] Fetched 7.104 B in 0s (22,3 kB/s) Selecting previously unselected package python3.5-venv. (Reading database ... 466428 files and directories currently installed.) Preparing to unpack .../python3.5-venv_3.5.2-2ubuntu0~16.04.4_amd64.deb ... Unpacking python3.5-venv (3.5.2-2ubuntu0~16.04.4) ... Selecting previously unselected package python3-venv. Preparing to unpack .../python3-venv_3.5.1-3_amd64.deb ... Unpacking python3-venv (3.5.1-3) ... Processing triggers for man-db (2.7.5-1) ... Setting up python3.5-venv (3.5.2-2ubuntu0~16.04.4) ... Setting up python3-venv (3.5.1-3) ... pooja@X1-Carbon-6:~/Documents/sva/projekten$ ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Attachment added: "lspci-vnvn.log" https://bugs.launchpad.net/bugs/1803135/+attachment/5212297/+files/lspci-vnvn.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1803135 Title: home WLAN does not work with Ubuntu 16.04 on Thinkpad To manage notifications about this bug go to:
[Bug 1791935] Re: Oracle VirtualBox failed to boot (kernel-bug-exists-upstream)
Hello, many thanks for your input, very much appreciated. The Oracle Virtual VM got installed smoothly after upgrading the Kernal to latest one 4.19. Regards, pooja -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791935 Title: Oracle VirtualBox failed to boot (kernel-bug-exists-upstream) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791935/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1760876] Re: DKMS driver builds fail with: Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel
Hello, I am getting the same error while installing the 'display-link' in Ubuntu 16.04 LTS, which I installed on Lenovo Thinkpad Carbon 6th. Here is the output of the run command [1]. What one need to do to fix this error? Best Regards, [1] ** pooja@X1-Carbon-6:~/Downloads/displaylink$ sudo ./displaylink-driver-4.2.29.run Verifying archive integrity... 100% All good. Uncompressing DisplayLink Linux Driver 4.2.29 100% DisplayLink Linux Software 4.2.29 install script called: install Distribution discovered: Ubuntu 16.04.5 LTS Installing Configuring EVDI DKMS module Registering EVDI kernel module with DKMS Building EVDI kernel module with DKMS ERROR (code 3): Failed to build evdi/4.2.29. Consult /var/lib/dkms/evdi/4.2.29/build/make.log for details.. [2] * pooja@X1-Carbon-6:~/Downloads/displaylink$ sudo cat /var/lib/dkms/evdi/4.2.29/build/make.log DKMS make.log for evdi-4.2.29 for kernel 4.19.0-041900rc4-lowlatency (x86_64) Di 18. Sep 12:15:11 CEST 2018 make KBUILD_VERBOSE=1 SUBDIRS=/var/lib/dkms/evdi/4.2.29/build SRCROOT=/var/lib/dkms/evdi/4.2.29/build CONFIG_MODULE_SIG= -C /lib/modules/4.19.0-041900rc4-lowlatency/build modules make[1]: Entering directory '/usr/src/linux-headers-4.19.0-041900rc4-lowlatency' test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or include/config/auto.conf are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) mkdir -p /var/lib/dkms/evdi/4.2.29/build/.tmp_versions ; rm -f /var/lib/dkms/evdi/4.2.29/build/.tmp_versions/* make -f ./scripts/Makefile.build obj=/var/lib/dkms/evdi/4.2.29/build (cat /dev/null; echo kernel//var/lib/dkms/evdi/4.2.29/build/evdi.ko;) > /var/lib/dkms/evdi/4.2.29/build/modules.order gcc -Wp,-MD,/var/lib/dkms/evdi/4.2.29/build/.evdi_drv.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/5/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -include ./include/linux/compiler_types.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -fshort-wchar -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -fno-PIE -DCC_HAVE_ASM_GOTO -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -m64 -falign-jumps=1 -falign-loops=1 -mno-80387 -mno-fp-ret-in-387 -mpreferred-stack-boundary=3 -mskip-rax-setup -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -DCONFIG_AS_CFI_SECTIONS=1 -DCONFIG_AS_FXSAVEQ=1 -DCONFIG_AS_SSSE3=1 -DCONFIG_AS_CRC32=1 -DCONFIG_AS_AVX=1 -DCONFIG_AS_AVX2=1 -DCONFIG_AS_AVX512=1 -DCONFIG_AS_SHA1_NI=1 -DCONFIG_AS_SHA256_NI=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mindirect-branch=thunk-extern -mindirect-branch-register -DRETPOLINE -fno-delete-null-pointer-checks -O2 --param=allow-store-data-races=0 -Wframe-larger-than=1024 -fstack-protector-strong -Wno-unused-but-set-variable -fno-omit-frame-pointer -fno-optimize-sibling-calls -fno-var-tracking-assignments -pg -mrecord-mcount -mfentry -DCC_USING_FENTRY -Wdeclaration-after-statement -Wno-pointer-sign -fno-strict-overflow -fno-merge-all-constants -fmerge-constants -fno-stack-check -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -Werror=incompatible-pointer-types -Werror=designated-init -Iinclude/drm -DMODULE -DKBUILD_BASENAME='"evdi_drv"' -DKBUILD_MODNAME='"evdi"' -c -o /var/lib/dkms/evdi/4.2.29/build/evdi_drv.o /var/lib/dkms/evdi/4.2.29/build/evdi_drv.c ./tools/objtool/objtool check --module --retpoline "/var/lib/dkms/evdi/4.2.29/build/evdi_drv.o"; gcc -Wp,-MD,/var/lib/dkms/evdi/4.2.29/build/.evdi_modeset.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/5/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -include ./include/linux/compiler_types.h -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -fshort-wchar -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -fno-PIE -DCC_HAVE_ASM_GOTO -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -mno-avx -m64 -falign-jumps=1 -falign-loops=1 -mno-80387 -mno-fp-ret-in-387 -mpreferred-stack-boundary=3 -mskip-rax-setup -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -DCONFIG_X86_X32_ABI -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1
[Bug 1791921] Re: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
you are a life saver Kai-Heng Feng, thanks a ton. I really did not expect ever to see my touchpad working. Thank you, pooja -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Re: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
Meanwhile, I updated the Kernal to 4.19rc4, here is the uname info [1], no improvement on touchpad behavior. Regards, pooja [1] ** pooja@X1-Carbon-6:~$ uname -a Linux X1-Carbon-6 4.19.0-041900rc4-lowlatency #201809162031 SMP PREEMPT Sun Sep 16 20:36:16 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux pooja@X1-Carbon-6:~$ uname -r 4.19.0-041900rc4-lowlatency -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Re: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
Hello, I first tried to install the kernak using the instructions as you provided, but it complained about missing libssl** package, which I installed, leading to another complain of missing ' linux-headers-4.19.0' package. After bit of googling to find this package, I ended up to install the latest 4.19 Kernal following the instructions of this page [1], here is the information of my latest kernal [2] and here is the output of trying to install the 4.19**generaic*.deb package, the Kernal remains same as before [2]. Anyways, I did reboot the system and it unfortunately did not change anything. The mouse behavior is still the same as before. Here is the output of [3] xinpout --list-props 12 [1] http://www.theubuntumaniac.com/2018/09/install-update-linux- kernel-419-rc3-on.html [2] *** pooja@X1-Carbon-6:~/Desktop$ uname -r 4.19.0-041900rc3-lowlatency pooja@X1-Carbon-6:~/Desktop$ uname -a [2] *** pooja@X1-Carbon-6:~/Desktop$ sudo dpkg -i linux-modules-4.19.0-041900rc3-generic_4.19.0-041900rc3.201809120832_amd64.deb (Reading database ... 281748 files and directories currently installed.) Preparing to unpack linux-modules-4.19.0-041900rc3-generic_4.19.0-041900rc3.201809120832_amd64.deb ... Unpacking linux-modules-4.19.0-041900rc3-generic (4.19.0-041900rc3.201809120832) over (4.19.0-041900rc3.201809120832) ... Setting up linux-modules-4.19.0-041900rc3-generic (4.19.0-041900rc3.201809120832) ... Processing triggers for linux-image-unsigned-4.19.0-041900rc3-generic (4.19.0-041900rc3.201809120832) ... /etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-4.19.0-041900rc3-generic W: Possible missing firmware /lib/firmware/i915/skl_dmc_ver1_27.bin for module i915 W: Possible missing firmware /lib/firmware/i915/kbl_dmc_ver1_04.bin for module i915 W: Possible missing firmware /lib/firmware/i915/cnl_dmc_ver1_07.bin for module i915 W: Possible missing firmware /lib/firmware/i915/kbl_guc_ver9_39.bin for module i915 W: Possible missing firmware /lib/firmware/i915/bxt_guc_ver9_29.bin for module i915 W: Possible missing firmware /lib/firmware/i915/skl_guc_ver9_33.bin for module i915 /etc/kernel/postinst.d/zz-update-grub: Generating grub configuration file ... Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported. Found linux image: /boot/vmlinuz-4.19.0-041900rc3-lowlatency Found initrd image: /boot/initrd.img-4.19.0-041900rc3-lowlatency Found linux image: /boot/vmlinuz-4.19.0-041900rc3-generic Found initrd image: /boot/initrd.img-4.19.0-041900rc3-generic Found linux image: /boot/vmlinuz-4.15.0-34-generic Found initrd image: /boot/initrd.img-4.15.0-34-generic Found linux image: /boot/vmlinuz-4.15.0-29-generic Found initrd image: /boot/initrd.img-4.15.0-29-generic Adding boot menu entry for EFI firmware configuration done [3] ** pooja@X1-Carbon-6:~/Desktop$ xinput --list-props 12 Device 'SynPS/2 Synaptics TouchPad': Device Enabled (153): 1 Coordinate Transformation Matrix (155): 1.00, 0.00, 0.00, 0.00, 1.00, 0.00, 0.00, 0.00, 1.00 Device Accel Profile (276): 1 Device Accel Constant Deceleration (277): 2.50 Device Accel Adaptive Deceleration (278): 1.00 Device Accel Velocity Scaling (279):12.50 Synaptics Edges (302): 1574, 5370, 1350, 4502 Synaptics Finger (303): 40, 40, 0 Synaptics Tap Time (304): 180 Synaptics Tap Move (305): 252 Synaptics Tap Durations (306): 180, 180, 100 Synaptics ClickPad (307): 1 Synaptics Middle Button Timeout (308): 0 Synaptics Two-Finger Pressure (309):282 Synaptics Two-Finger Width (310): 7 Synaptics Scrolling Distance (311): 114, 114 Synaptics Edge Scrolling (312): 1, 1, 1 Synaptics Two-Finger Scrolling (313): 1, 1 Synaptics Move Speed (314): 1.00, 1.75, 0.034874, 0.00 Synaptics Off (315):2 Synaptics Locked Drags (316): 0 Synaptics Locked Drags Timeout (317): 5000 Synaptics Tap Action (318): 2, 3, 0, 0, 1, 3, 0 Synaptics Click Action (319): 1, 3, 0 Synaptics Circular Scrolling (320): 0 Synaptics Circular Scrolling Distance (321):0.10 Synaptics Circular Scrolling Trigger (322): 0 Synaptics Circular Pad (323): 0 Synaptics Palm Detection (324): 0 Synaptics Palm Dimensions (325):10, 200 Synaptics Coasting Speed (326): 20.00, 50.00 Synaptics Pressure Motion (327):30, 160 Synaptics Pressure Motion Factor (328): 1.00, 1.00 Synaptics Resolution Detect (329): 1 Synaptics Grab Event Device (330): 0 Synaptics Gestures (331): 1 Synaptics
[Bug 1791935] Re: Oracle VirtualBox failed to boot
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791935 Title: Oracle VirtualBox failed to boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791935/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791935] [NEW] Oracle VirtualBox failed to boot
Public bug reported: Hello Ubuntu Team, I already reported one of bug related to my new Ubuntu 16.04 installation [1], which has to do with the touchpad not working at all after fresh installation of ubuntu 16.04. Now I installed the Oracle Virtualbox VM following the instructions given here [2], however it failed to boot, throwing this error-message [3]. The output of 'sudo /sbin/vboxconfig' is given in [4], the dmesg output could be find in attachment as text file. What has been asked in the instructions does not have any output: pooja@X1-Carbon-6:~/Downloads$ cat /proc/version_signature > version.log pooja@X1-Carbon-6:~/Downloads$ sudo lspci -vnvn > lspci-vnvn.log pooja@X1-Carbon-6:~/Downloads$ Any guidence how to fix this bug is appreciated. Thanks [1] https://bugs.launchpad.net/bugs/1791921 [2] https://tecadmin.net/install-oracle-virtualbox-on-ubuntu/ [3] *** pooja@X1-Carbon-6:~/Downloads$ virtualbox WARNING: The vboxdrv kernel module is not loaded. Either there is no module available for the current kernel (4.15.0-34-generic) or it failed to load. Please recompile the kernel module and install it by sudo /sbin/vboxconfig You will not be able to start VMs until this problem is fixed. [4] pooja@X1-Carbon-6:~/Downloads$sudo /sbin/vboxconfig [sudo] password for pooja: vboxdrv.sh: Stopping VirtualBox services. vboxdrv.sh: Starting VirtualBox services. vboxdrv.sh: Building VirtualBox kernel modules. vboxdrv.sh: failed: modprobe vboxdrv failed. Please use 'dmesg' to find out why. There were problems setting up VirtualBox. To re-start the set-up process, run /sbin/vboxconfig as root. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791935 Title: Oracle VirtualBox failed to boot To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791935/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Re: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
** Description changed: Hello, - I installed Ubuntu 16.04 LTS on Lenovo Thinkpad Carbon-6th, Kernal information could be find here [0]. Soon after the installation the touchpad is not working at all, it just randomly move here and there sometime, else nothing. + I installed Ubuntu 16.04 LTS on Lenovo Thinkpad Carbon-6th, Kernal information could be find here [0]. Soon after the installation the touchpad is not working at all, it just randomly move here and there sometime, else nothing. Mouse works absolutely fine. More information 1. I could find the tocupad-device present in 'cat /proc/bus/input/devices' [1] 2. xinput is given here [2] - 3. 'xinput --list-props 12' output is here [3], I tried to change the values but no success unfortunately. + 3. 'xinput --list-props 12' output is here [3], I tried to change the values but no success unfortunately. 4. I found this wiki (https://wiki.ubuntu.com/DebuggingTouchpadDetection#In_case_your_Touchpad_doesn.27t_work_at_all_.28No_response_from_the_Touchpad.29) and ended up reporting this bug. - 5. One last piece of information, somehow I managed to have my touchpad worked absolutely fine during my previous attempt of Ubuntu 16.04 installation this morning. - The only parameters I changed was - xinput set-prop 12 302 1 1 1 + 5. One last piece of information, somehow I managed to have my touchpad worked absolutely fine during my previous attempt of Ubuntu 16.04 installation this morning. + The only parameters I changed was + xinput set-prop 12 302 1 1 1 xinput set-prop 12 293 40 40 0 I had to discard that installation as there was issue in sudo apt-get update, it failed to get the package, which seem to be linked with the wifi issue. So I connected to proper wifi and tried fresh installation and ended up loosing my stable touchpad. I would really appreciate any help in fixing this problem. Many thanks for your time! Best Regards Pooja - [0] ** pooja@X1-Carbon-6:~$ uname -a Linux X1-Carbon-6 4.15.0-34-generic #37~16.04.1-Ubuntu SMP Tue Aug 28 10:44:06 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux - [1] + [1] *** I: Bus=0011 Vendor=0002 Product=0007 Version=01a1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input5 U: Uniq= - H: Handlers=mouse0 event5 + H: Handlers=mouse0 event5 B: PROP=5 B: EV=b B: KEY=e520 1 0 0 0 0 B: ABS=66080001103 [2] *** pooja@X1-Carbon-6:~$ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouse id=9[slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)] ⎜ ↳ PS/2 Generic Mouse id=14 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] - ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] - ↳ Power Buttonid=6[slave keyboard (3)] - ↳ Video Bus id=7[slave keyboard (3)] - ↳ Sleep Buttonid=8[slave keyboard (3)] - ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] - ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] - ↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)] + ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] + ↳ Power Buttonid=6[slave keyboard (3)] + ↳ Video Bus id=7[slave keyboard (3)] + ↳ Sleep Buttonid=8[slave keyboard (3)] + ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] + ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] + ↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)] [3] pooja@X1-Carbon-6:~$ xinput --list-props 12 Device 'SynPS/2 Synaptics TouchPad': - Device Enabled (143): 1 - Coordinate Transformation Matrix (145): 1.00, 0.00, 0.00, 0.00, 1.00, 0.00, 0.00, 0.00, 1.00 - Device Accel Profile (266): 0 - Device Accel Constant Deceleration (267): 2.50 - Device Accel Adaptive Deceleration (268): 1.00 - Device Accel Velocity Scaling (269):12.50 - Synaptics Edges (292): 1574, 5370, 1350, 4502 - Synaptics Finger (293): 40, 40, 0 - Synaptics Tap Time (294): 180 - Synaptics Tap Move (295): 252 - Synaptics Tap Durations
[Bug 1791921] WifiSyslog.txt
apport information ** Attachment added: "WifiSyslog.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187520/+files/WifiSyslog.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] ProcInterrupts.txt
apport information ** Attachment added: "ProcInterrupts.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187515/+files/ProcInterrupts.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] ProcModules.txt
apport information ** Attachment added: "ProcModules.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187516/+files/ProcModules.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] CurrentDmesg.txt
apport information ** Attachment added: "CurrentDmesg.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187508/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] RfKill.txt
apport information ** Attachment added: "RfKill.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187518/+files/RfKill.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187514/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] UdevDb.txt
apport information ** Attachment added: "UdevDb.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187519/+files/UdevDb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] PulseList.txt
apport information ** Attachment added: "PulseList.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187517/+files/PulseList.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Lsusb.txt
apport information ** Attachment added: "Lsusb.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187511/+files/Lsusb.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Lspci.txt
apport information ** Attachment added: "Lspci.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187510/+files/Lspci.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] ProcCpuinfo.txt
apport information ** Attachment added: "ProcCpuinfo.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187512/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] ProcCpuinfoMinimal.txt
apport information ** Attachment added: "ProcCpuinfoMinimal.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187513/+files/ProcCpuinfoMinimal.txt ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] Re: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
apport information ** Tags added: apport-collected xenial ** Description changed: Hello, I installed Ubuntu 16.04 LTS on Lenovo Thinkpad Carbon-6th, Kernal information could be find here [0]. Soon after the installation the touchpad is not working at all, it just randomly move here and there sometime, else nothing. More information 1. I could find the tocupad-device present in 'cat /proc/bus/input/devices' [1] 2. xinput is given here [2] 3. 'xinput --list-props 12' output is here [3], I tried to change the values but no success unfortunately. 4. I found this wiki (https://wiki.ubuntu.com/DebuggingTouchpadDetection#In_case_your_Touchpad_doesn.27t_work_at_all_.28No_response_from_the_Touchpad.29) and ended up reporting this bug. 5. One last piece of information, somehow I managed to have my touchpad worked absolutely fine during my previous attempt of Ubuntu 16.04 installation this morning. The only parameters I changed was xinput set-prop 12 302 1 1 1 xinput set-prop 12 293 40 40 0 I had to discard that installation as there was issue in sudo apt-get update, it failed to get the package, which seem to be linked with the wifi issue. So I connected to proper wifi and tried fresh installation and ended up loosing my stable touchpad. I would really appreciate any help in fixing this problem. Many thanks for your time! Best Regards Pooja [0] ** pooja@X1-Carbon-6:~$ uname -a Linux X1-Carbon-6 4.15.0-34-generic #37~16.04.1-Ubuntu SMP Tue Aug 28 10:44:06 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [1] *** I: Bus=0011 Vendor=0002 Product=0007 Version=01a1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input5 U: Uniq= H: Handlers=mouse0 event5 B: PROP=5 B: EV=b B: KEY=e520 1 0 0 0 0 B: ABS=66080001103 [2] *** pooja@X1-Carbon-6:~$ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouse id=9[slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)] ⎜ ↳ PS/2 Generic Mouse id=14 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Sleep Buttonid=8[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] ↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)] [3] pooja@X1-Carbon-6:~$ xinput --list-props 12 Device 'SynPS/2 Synaptics TouchPad': Device Enabled (143): 1 Coordinate Transformation Matrix (145): 1.00, 0.00, 0.00, 0.00, 1.00, 0.00, 0.00, 0.00, 1.00 Device Accel Profile (266): 0 Device Accel Constant Deceleration (267): 2.50 Device Accel Adaptive Deceleration (268): 1.00 Device Accel Velocity Scaling (269):12.50 Synaptics Edges (292): 1574, 5370, 1350, 4502 Synaptics Finger (293): 40, 40, 0 Synaptics Tap Time (294): 180 Synaptics Tap Move (295): 252 Synaptics Tap Durations (296): 180, 180, 100 Synaptics ClickPad (297): 0 Synaptics Middle Button Timeout (298): 75 Synaptics Two-Finger Pressure (299):4 Synaptics Two-Finger Width (300): 9 Synaptics Scrolling Distance (301): 104, 104 Synaptics Edge Scrolling (302): 1, 1, 1 Synaptics Two-Finger Scrolling (303): 1, 0 Synaptics Move Speed (304): 1.00, 1.75, 0.034874, 0.00 Synaptics Off (305):2 Synaptics Locked Drags (306): 0 Synaptics Locked Drags Timeout (307): 5000 Synaptics Tap Action (308): 0, 0, 0, 0, 1, 2, 3 Synaptics Click Action (309): 1, 3, 0 Synaptics Circular Scrolling (310): 1 Synaptics Circular Scrolling Distance (311):0.10 Synaptics Circular Scrolling Trigger (312): 3 Synaptics Circular Pad (313): 0 Synaptics Palm Detection (314): 0 Synaptics Palm Dimensions (315):10, 200 Synaptics Coasting Speed (316): 20.00, 50.00 Synaptics Pressure Motion (317):30, 160 Synaptics Pressure Motion Factor (318): 1.00, 1.00
[Bug 1791921] CRDA.txt
apport information ** Attachment added: "CRDA.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187507/+files/CRDA.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] IwConfig.txt
apport information ** Attachment added: "IwConfig.txt" https://bugs.launchpad.net/bugs/1791921/+attachment/5187509/+files/IwConfig.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1791921 Title: Touchpad doesn't work at all after fresh installation of Ubuntu 16.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1791921/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1791921] [NEW] Touchpad doesn't work at all after fresh installation of Ubuntu 16.04
Public bug reported: Hello, I installed Ubuntu 16.04 LTS on Lenovo Thinkpad Carbon-6th, Kernal information could be find here [0]. Soon after the installation the touchpad is not working at all, it just randomly move here and there sometime, else nothing. More information 1. I could find the tocupad-device present in 'cat /proc/bus/input/devices' [1] 2. xinput is given here [2] 3. 'xinput --list-props 12' output is here [3], I tried to change the values but no success unfortunately. 4. I found this wiki (https://wiki.ubuntu.com/DebuggingTouchpadDetection#In_case_your_Touchpad_doesn.27t_work_at_all_.28No_response_from_the_Touchpad.29) and ended up reporting this bug. 5. One last piece of information, somehow I managed to have my touchpad worked absolutely fine during my previous attempt of Ubuntu 16.04 installation this morning. The only parameters I changed was xinput set-prop 12 302 1 1 1 xinput set-prop 12 293 40 40 0 I had to discard that installation as there was issue in sudo apt-get update, it failed to get the package, which seem to be linked with the wifi issue. So I connected to proper wifi and tried fresh installation and ended up loosing my stable touchpad. I would really appreciate any help in fixing this problem. Many thanks for your time! Best Regards Pooja [0] ** pooja@X1-Carbon-6:~$ uname -a Linux X1-Carbon-6 4.15.0-34-generic #37~16.04.1-Ubuntu SMP Tue Aug 28 10:44:06 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux [1] *** I: Bus=0011 Vendor=0002 Product=0007 Version=01a1 N: Name="SynPS/2 Synaptics TouchPad" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input5 U: Uniq= H: Handlers=mouse0 event5 B: PROP=5 B: EV=b B: KEY=e520 1 0 0 0 0 B: ABS=66080001103 [2] *** pooja@X1-Carbon-6:~$ xinput ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointerid=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouseid=9[slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPadid=12 [slave pointer (2)] ⎜ ↳ PS/2 Generic Mouseid=14 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Button id=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Sleep Button id=8[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ↳ ThinkPad Extra Buttonsid=13 [slave keyboard (3)] [3] pooja@X1-Carbon-6:~$ xinput --list-props 12 Device 'SynPS/2 Synaptics TouchPad': Device Enabled (143): 1 Coordinate Transformation Matrix (145): 1.00, 0.00, 0.00, 0.00, 1.00, 0.00, 0.00, 0.00, 1.00 Device Accel Profile (266): 0 Device Accel Constant Deceleration (267): 2.50 Device Accel Adaptive Deceleration (268): 1.00 Device Accel Velocity Scaling (269):12.50 Synaptics Edges (292): 1574, 5370, 1350, 4502 Synaptics Finger (293): 40, 40, 0 Synaptics Tap Time (294): 180 Synaptics Tap Move (295): 252 Synaptics Tap Durations (296): 180, 180, 100 Synaptics ClickPad (297): 0 Synaptics Middle Button Timeout (298): 75 Synaptics Two-Finger Pressure (299):4 Synaptics Two-Finger Width (300): 9 Synaptics Scrolling Distance (301): 104, 104 Synaptics Edge Scrolling (302): 1, 1, 1 Synaptics Two-Finger Scrolling (303): 1, 0 Synaptics Move Speed (304): 1.00, 1.75, 0.034874, 0.00 Synaptics Off (305):2 Synaptics Locked Drags (306): 0 Synaptics Locked Drags Timeout (307): 5000 Synaptics Tap Action (308): 0, 0, 0, 0, 1, 2, 3 Synaptics Click Action (309): 1, 3, 0 Synaptics Circular Scrolling (310): 1 Synaptics Circular Scrolling Distance (311):0.10 Synaptics Circular Scrolling Trigger (312): 3 Synaptics Circular Pad (313): 0 Synaptics Palm Detection (314): 0 Synaptics Palm Dimensions (315):10, 200 Synaptics Coasting Speed (316): 20.00, 50.00 Synaptics Pressure Motion (317):30, 160 Synaptics Pressure Motion Factor (318): 1.00, 1.00 Synaptics Resolution Detect (319): 1 Synaptics Grab Event Device (320): 0 Synaptics Gestures (321): 1 Synaptics Capabilities (322): 1, 0, 0, 1, 1, 1, 1 Synaptics Pad Resolution (323): 1, 1 Synaptics Area (324):
[Bug 1790801] Re: Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad
Hello, Thanks for your reply. I remember that I did play around with kernal change as my first attempt to fix the touchpad issue, but can not confirm changing to other Kernal intentionally. And the problems with 18.04 persist since day-1. The steps I followed for testing the latest Kernal: 1. uninstall Oracle Virtual Box 2. Download linux-headers-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb from [0] 3. Got error while installing the latest kernal [1] 4. While google around for how to fix the issue, found this page [2], the installation failed as well giving series of error messages [3] If there is a way to fix these problems, I would be really keen to try them. But as you know, that this is affecting my work, so I might wanna try lower version, I did a test with USB installed 16.04, everything worked with that. In my understanding, if I installed that, then also it would keep working fine? Thanks, pooja [0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19-rc2/ [1] *** pooja@pooja-thinkpad-x1:~/Downloads$ sudo dpkg -i linux-headers-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb [sudo] password for pooja: (Reading database ... 303265 files and directories currently installed.) Preparing to unpack linux-headers-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-headers-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Setting up linux-headers-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) ... /etc/kernel/header_postinst.d/dkms: ERROR (dkms apport): binary package for evdi: 4.2.29 not found Error! Bad return status for module build on kernel: 4.19.0-041900rc2-generic (x86_64) Consult /var/lib/dkms/evdi/4.2.29/build/make.log for more information. [2] http://www.theubuntumaniac.com/2018/09/install-update-linux- kernel-419-rc2-on.html [3] *** pooja@pooja-thinkpad-x1:~/Downloads$ sudo dpkg -i *.deb (Reading database ... 303265 files and directories currently installed.) Preparing to unpack linux-headers-4.19.0-041900rc2_4.19.0-041900rc2.201809022230_all.deb ... Unpacking linux-headers-4.19.0-041900rc2 (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-headers-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-headers-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-headers-4.19.0-041900rc2-lowlatency_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-headers-4.19.0-041900rc2-lowlatency (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-image-unsigned-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-image-unsigned-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-image-unsigned-4.19.0-041900rc2-lowlatency_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-image-unsigned-4.19.0-041900rc2-lowlatency (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-modules-4.19.0-041900rc2-generic_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-modules-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack linux-modules-4.19.0-041900rc2-lowlatency_4.19.0-041900rc2.201809022230_amd64.deb ... Unpacking linux-modules-4.19.0-041900rc2-lowlatency (4.19.0-041900rc2.201809022230) over (4.19.0-041900rc2.201809022230) ... Preparing to unpack rstudio-xenial-1.1.456-amd64.deb ... Unpacking rstudio (1.1.456) over (1.1.456) ... Preparing to unpack splunk-7.1.2-a0c72a66db66-linux-2.6-amd64.deb ... This looks like an upgrade of an existing Splunk Server. Attempting to stop the installed Splunk Server... splunkd is not running. Unpacking splunk (7.1.2) over (7.1.2) ... Setting up linux-headers-4.19.0-041900rc2 (4.19.0-041900rc2.201809022230) ... Setting up linux-headers-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) ... /etc/kernel/header_postinst.d/dkms: ERROR (dkms apport): binary package for evdi: 4.2.29 not found Error! Bad return status for module build on kernel: 4.19.0-041900rc2-generic (x86_64) Consult /var/lib/dkms/evdi/4.2.29/build/make.log for more information. Setting up linux-headers-4.19.0-041900rc2-lowlatency (4.19.0-041900rc2.201809022230) ... /etc/kernel/header_postinst.d/dkms: ERROR (dkms apport): binary package for evdi: 4.2.29 not found Error! Bad return status for module build on kernel: 4.19.0-041900rc2-lowlatency (x86_64) Consult /var/lib/dkms/evdi/4.2.29/build/make.log for more information. Setting up linux-modules-4.19.0-041900rc2-generic (4.19.0-041900rc2.201809022230) ... Setting up linux-modules-4.19.0-041900rc2-lowlatency
[Bug 1790801] Re: Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad
status: Confirmed tags: 'kernel-bug-exists-upstream'. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790801 Title: Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1790801/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790801] Re: Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad
apport information ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed ** Tags added: apport-collected ** Description changed: Hallo, The touchpad is not working after installing Ubuntu 18.04.1 LTS in Lenovo Thinkpad laptop. After a lot of googling and trying around, I managed to make it work in the sense that i could move cursor here and there, but still it has numbers of problems. Here is the list of problems it still has: 1. The scrolling does not work at all, it never worked. 2. It is dead after each restart and I have to provide this commands to make it work, so that the cursor could move. sudo modprobe -rv psmouse sudo modprobe -v psmouse proto=imps 3. The typing of the keyboard does not work smoothly, which make me really difficult to work. For example: I ended up typing this ''he list Here is the pr to repoty I want thatoblem of t'' when I want to type: 'Here is the list of problems that I want to report' 4. The left and right touch is really hard. Here is the information on my touchpad 1. pooja@pooja-thinkpad-x1:~$ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouse id=9[slave pointer (2)] ⎜ ↳ PS/2 Synaptics TouchPad id=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Sleep Buttonid=8[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=11 [slave keyboard (3)] ↳ ThinkPad Extra Buttons id=13 [slave keyboard (3)] 2. pooja@pooja-thinkpad-x1:~$ xinput list 12 PS/2 Synaptics TouchPad id=12 [slave pointer (2)] Reporting 7 classes: Class originated from: 12. Type: XIButtonClass Buttons supported: 7 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" Button state: Class originated from: 12. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Scroll Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Scroll Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 15.00 flags: 0x0 Class originated from: 12. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: 15.00 flags: 0x0 3. pooja@pooja-thinkpad-x1:~$ sudo xinput set-prop 12 "libinput Natural Scrolling Enabled Default" 1 [sudo] password for pooja: X Error of failed request: BadAccess (attempt to access private resource denied) Major opcode of failed request: 131 (XInputExtension) Minor opcode of failed request: 57 () Serial number of failed request: 20 Current serial number in output stream: 21 4. I realized that before my touchpad was differently written as now. pooja@pooja-ThinkPad-X1-Carbon-6th:~$ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouse id=9[slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3
[Bug 1790801] ProcEnviron.txt
apport information ** Attachment added: "ProcEnviron.txt" https://bugs.launchpad.net/bugs/1790801/+attachment/5184801/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1790801 Title: Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1790801/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1790801] [NEW] Ubuntu 18.04 touchppad does not work smoothly in Lenono Thinkpad
Public bug reported: Hallo, The touchpad is not working after installing Ubuntu 18.04.1 LTS in Lenovo Thinkpad laptop. After a lot of googling and trying around, I managed to make it work in the sense that i could move cursor here and there, but still it has numbers of problems. Here is the list of problems it still has: 1. The scrolling does not work at all, it never worked. 2. It is dead after each restart and I have to provide this commands to make it work, so that the cursor could move. sudo modprobe -rv psmouse sudo modprobe -v psmouse proto=imps 3. The typing of the keyboard does not work smoothly, which make me really difficult to work. For example: I ended up typing this ''he list Here is the pr to repoty I want thatoblem of t'' when I want to type: 'Here is the list of problems that I want to report' 4. The left and right touch is really hard. Here is the information on my touchpad 1. pooja@pooja-thinkpad-x1:~$ xinput ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointerid=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouseid=9[slave pointer (2)] ⎜ ↳ PS/2 Synaptics TouchPad id=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Button id=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Sleep Button id=8[slave keyboard (3)] ↳ Integrated Camera: Integrated C id=10 [slave keyboard (3)] ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)] ↳ ThinkPad Extra Buttonsid=13 [slave keyboard (3)] 2. pooja@pooja-thinkpad-x1:~$ xinput list 12 PS/2 Synaptics TouchPad id=12 [slave pointer (2)] Reporting 7 classes: Class originated from: 12. Type: XIButtonClass Buttons supported: 7 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" Button state: Class originated from: 12. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Scroll Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Scroll Range: -1.00 - -1.00 Resolution: 0 units/m Mode: relative Class originated from: 12. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 15.00 flags: 0x0 Class originated from: 12. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: 15.00 flags: 0x0 3. pooja@pooja-thinkpad-x1:~$ sudo xinput set-prop 12 "libinput Natural Scrolling Enabled Default" 1 [sudo] password for pooja: X Error of failed request: BadAccess (attempt to access private resource denied) Major opcode of failed request: 131 (XInputExtension) Minor opcode of failed request: 57 () Serial number of failed request: 20 Current serial number in output stream: 21 4. I realized that before my touchpad was differently written as now. pooja@pooja-ThinkPad-X1-Carbon-6th:~$ xinput ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointerid=4[slave pointer (2)] ⎜ ↳ Logitech Optical USB Mouseid=9[slave pointer (2)] ⎜ ↳ SynPS/2 Synaptics TouchPadid=12 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Button id=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Sleep Button
[Bug 512600] Re: import ROOT -> ImportError: No module named libPyROOT
Hello, I am facing the same issue and honestly I do not understand the fix suggested in above post: --- A fix which would respect the convention of other Python packages would be to symlink the PyROOT .py and .so module files into /usr/lib/pythonXX/dist-packages I am working on Ubuntu 14.04. I will be happy to provide any information required. Look forward to hear back, thanks, pooja -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/512600 Title: import ROOT -> ImportError: No module named libPyROOT To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/root-system/+bug/512600/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012602] Re: add-apt-repository crashed with UnicodeDecodeError in __main__: 'ascii' codec can't decode byte 0xc5 in position 3: ordinal not in range(128)
Thanks Matthew for your reply. I got confuse with the error-type I was receiving, so reported it here. Nobody responded, besides this thread was quite old. So I reported the same as new bug: 1462196 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012602 Title: add-apt-repository crashed with UnicodeDecodeError in __main__: 'ascii' codec can't decode byte 0xc5 in position 3: ordinal not in range(128) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1012602/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1462196] [NEW] indicator-stinotes.py crashed with UnicodeDecodeError in decode(): 'utf-8' coded can't decode byte 0xae in position 5:invalid start byte
Public bug reported: Hello experts, I followed the following steps [1] and installed the stickynotes on Ubuntu 14.04. However, unfortunately, it always crashes with the error saying 'Sorry, Ubuntu 14.04 has experienced an internal error'. The details of this error says the following problem: -- 'indicator-stinotes.py crashed with UnicodeDecodeError in decode(): 'utf-8' coded can't decode byte 0xae in position 5:invalid start byte'. I found this useful post [2] indicating this bug for 14.04, I am not sure if I understand how this patch works. Regarding my python, its - Python 2.7.6 (default, Mar 22 2014, 22:59:56) [GCC 4.8.2] on linux2 I would appreciate any suggestions/comments on fixing this bug. Thanks, pooja [1] --- sudo add-apt-repository ppa:umang/indicator-stickynotes sudo apt-get update sudo apt-get install indicator-stickynotes [2] https://bugs.launchpad.net/ubuntu/+source/software- properties/+bug/1012602 ** Affects: software-properties (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1462196 Title: indicator-stinotes.py crashed with UnicodeDecodeError in decode(): 'utf-8' coded can't decode byte 0xae in position 5:invalid start byte To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1462196/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1012602] Re: add-apt-repository crashed with UnicodeDecodeError in __main__: 'ascii' codec can't decode byte 0xc5 in position 3: ordinal not in range(128)
Hello experts, I followed the following steps [1] and installed the stickynotes on Ubuntu 14.04. However, unfortunately, it always crashes with the error saying 'Sorry, Ubuntu 14.04 has experienced an internal error'. The details of this error says the following problem: -- 'indicator-stinotes.py crashed with UnicodeDecodeError in decode(): 'utf-8' coded can't decode byte 0xae in position 5:invalid start byte'. I found this useful post indicating this bug for 14.04, I am not sure if I understand how this patch works. Regarding my python, its - Python 2.7.6 (default, Mar 22 2014, 22:59:56) [GCC 4.8.2] on linux2 I would appreciate any suggestions/comments on fixing this bug. Thanks, pooja [1] --- sudo add-apt-repository ppa:umang/indicator-stickynotes sudo apt-get update sudo apt-get install indicator-stickynotes -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1012602 Title: add-apt-repository crashed with UnicodeDecodeError in __main__: 'ascii' codec can't decode byte 0xc5 in position 3: ordinal not in range(128) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1012602/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1325266] [NEW] kGmailNotifer does not show the mail after upgrading to 14.04
Public bug reported: Hello, I recently upgraded from 12.04 to 14.04 and realized that kGmailNotifer does not work anymore. It is installed, however while showing the mail detail (at the separate message which show up for fraction of second at the left corner of laptop), it does not have the feature of showing mail detail anymore. Though, it look like that some vague message has pop up but it is not visible at all. I wonder if it can be fixed? Thank you, ** Affects: kgmailnotifier (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1325266 Title: kGmailNotifer does not show the mail after upgrading to 14.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/kgmailnotifier/+bug/1325266/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1293450] [NEW] The Package System is Broken
Public bug reported: Dear Experts, I am using ubuntu 12.04. Recently, I started facing issues in updating and installing any packages. Following is the error message I rreceive when I try to update it [1] When I try using this command, following is the output [2]. I request to kindly reply and help me in fixing this bug. Kind regards pooja [1] --- ''Check if you are using third party repositories. If so disable them, since they are a common source of problems. Furthermore run the following command in a Terminal: apt-get install -f'' In Details, it says : The following packages have unmet dependencies: acroread: Depends: acroread-bin but it is a virtual package [2] pooja $ sudo apt-get install -f [sudo] password for pooja: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: acroread-bin:i386 Suggested packages: libldap2:i386 libgnome-speech7:i386 The following NEW packages will be installed: acroread-bin:i386 0 upgraded, 1 newly installed, 0 to remove and 29 not upgraded. 1 not fully installed or removed. Need to get 0 B/60.1 MB of archives. After this operation, 142 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 301465 files and directories currently installed.) Unpacking acroread-bin:i386 (from .../acroread-bin_9.5.5-1precise1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/acroread-bin_9.5.5-1precise1_i386.deb (--unpack): trying to overwrite '/opt/Adobe/Reader9/Reader/intellinux/mozilla/prefs.js', which is also in package adobereader-enu:i386 9.5.5 dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/acroread-bin_9.5.5-1precise1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) ** Affects: rtmpdump (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1293450 Title: The Package System is Broken To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rtmpdump/+bug/1293450/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1276071] [NEW] issue with Acroread in 12.04 (Ubuntu)
Public bug reported: Dear Experts, While opening the Acroread document from the terminal, I always use to receive these loads of warnings/messages [2]. Some thread reported the fix by installing this package (appmenu-gtk), however it seem to be already installed for my system [1] Besides, there is another error message which display these days: ''Cannot find or create the font 'Arial, Bold'. Some characters many not be display or print correctly'' it trouble me a lot, cos the document fail to display Arial font text. Kindly suggest fix for this. Thanking you very much, pooja [1] --- pooja@cmspooja:~$ sudo apt-get install appmenu-gtk Reading package lists... Done Building dependency tree Reading state information... Done appmenu-gtk is already the newest version. appmenu-gtk set to manually installed. The following packages were automatically installed and are no longer required: python-indicate linux-headers-3.5.0-23-generic language-pack-kde-en linux-headers-3.5.0-23 kde-l10n-engb gtk2-engines-pixbuf libqt4-webkit:i386 python-wnck language-pack-kde-en-base Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 59 not upgraded. [2] --- (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, (acroread:27357): Gtk-WARNING **: Unable to locate theme engine in module_path: murrine, Gtk-Message: Failed to load module canberra-gtk-module `menu_proxy_module_load': /usr/bin/acroread: undefined symbol: menu_proxy_module_load (acroread:27357): Gtk-WARNING **: Failed to load type module: (null) `menu_proxy_module_load': /usr/bin/acroread: undefined symbol: menu_proxy_module_load (acroread:27357): Gtk-WARNING **: Failed to load type module: (null) `menu_proxy_module_load': /usr/bin/acroread: undefined symbol: menu_proxy_module_load (acroread:27357): Gtk-WARNING **: Failed to
Re: [Bug 1063327] Re: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build
Hi, Thanks for the reply, I looked for the directory where you ask me to, but did not find any log /var/lib/dkms. My fear is that since the day I upgraded from 10.04 to 12.04 using upgrade manager, every day there is some failure sometimes terminal, firefox or any other application. I doubt if upgraded versions are stable at all?? I would appreciate if you could point me to the proper cross check suppose to be done to check the stability of its basic functioning. I wonder if it would crash someday. Thanks, Pooja On Mon, Oct 8, 2012 at 5:54 AM, Daniel van Vugt daniel.van.v...@canonical.com wrote: Thanks for you bug report but we can't do anything without details of the problem. Please look in /var/lib/dkms for a build log or any log file that might detail the exact error. ** Changed in: bcmwl (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: Incomplete Bug description: While installing the virtual bos related software using the synaptic manage, it throw an error that System internal has faced some Error, report it. Whcih eventually has lead me to this link. thansk ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1 [modified: usr/src/bcmwl-5.100.82.38+bdcom/src/wl/sys/wl_linux.c] ProcVersionSignature: Ubuntu 3.2.0-31.50-generic-pae 3.2.28 Uname: Linux 3.2.0-31-generic-pae i686 ApportVersion: 2.0.1-0ubuntu13 Architecture: i386 DKMSKernelVersion: 3.2.0-31-virtual Date: Sun Oct 7 19:14:35 2012 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) PackageVersion: 5.100.82.38+bdcom-0ubuntu6.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build UpgradeStatus: Upgraded to precise on 2012-09-19 (17 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 1063327] Re: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build
Hi again, I was trying to clean my Trash and I found the same message saying that Suystem has faced some internal Error. I checked the dmesg, output is here [1]. Thanks, Pooja [1] [134030.787883] r8169 :04:00.0: eth0: link down [134030.788151] ADDRCONF(NETDEV_UP): eth0: link is not ready [134030.913217] r8169 :04:00.0: PME# enabled [134030.956835] r8169 :04:00.0: PME# disabled [134030.959850] r8169 :04:00.0: eth0: link down [134030.960559] ADDRCONF(NETDEV_UP): eth0: link is not ready [134032.587394] r8169 :04:00.0: eth0: link up [134032.587961] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [134043.075531] eth0: no IPv6 routers present [136419.093342] show_signal_msg: 17 callbacks suppressed [136419.093348] gnome-terminal[4557]: segfault at 8 ip b6f826c0 sp bfca03d0 error 4 in libgobject-2.0.so.0.3200.3[b6f6f000+4d000] [137863.453510] usb 2-1.1: new high-speed USB device number 9 using ehci_hcd [137884.129934] usb 2-1.1: usbfs: process 14051 (rhythmbox) did not claim interface 0 before use [137884.200534] usb 2-1.1: reset high-speed USB device number 9 using ehci_hcd [137884.784165] usb 2-1.1: usbfs: process 14051 (rhythmbox) did not claim interface 0 before use [137884.784209] usb 2-1.1: usbfs: process 13986 (gvfsd-gphoto2) did not claim interface 0 before use [137884.784243] usb 2-1.1: usbfs: process 13986 (gvfsd-gphoto2) did not claim interface 0 before use [137884.784269] usb 2-1.1: usbfs: process 13986 (gvfsd-gphoto2) did not claim interface 0 before use [137884.784279] usb 2-1.1: usbfs: process 13986 (gvfsd-gphoto2) did not claim interface 0 before use [137884.784289] usb 2-1.1: usbfs: process 13986 (gvfsd-gphoto2) did not claim interface 0 before use poojasaxena@poojasaxena-laptop:~$ On Fri, Oct 12, 2012 at 11:16 AM, Pooja Saxena nrjrasax...@gmail.comwrote: Hi, Thanks for the reply, I looked for the directory where you ask me to, but did not find any log /var/lib/dkms. My fear is that since the day I upgraded from 10.04 to 12.04 using upgrade manager, every day there is some failure sometimes terminal, firefox or any other application. I doubt if upgraded versions are stable at all?? I would appreciate if you could point me to the proper cross check suppose to be done to check the stability of its basic functioning. I wonder if it would crash someday. Thanks, Pooja On Mon, Oct 8, 2012 at 5:54 AM, Daniel van Vugt daniel.van.v...@canonical.com wrote: Thanks for you bug report but we can't do anything without details of the problem. Please look in /var/lib/dkms for a build log or any log file that might detail the exact error. ** Changed in: bcmwl (Ubuntu) Status: New = Incomplete -- You received this bug notification because you are subscribed to the bug report. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build Status in “bcmwl” package in Ubuntu: Incomplete Bug description: While installing the virtual bos related software using the synaptic manage, it throw an error that System internal has faced some Error, report it. Whcih eventually has lead me to this link. thansk ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1 [modified: usr/src/bcmwl-5.100.82.38+bdcom/src/wl/sys/wl_linux.c] ProcVersionSignature: Ubuntu 3.2.0-31.50-generic-pae 3.2.28 Uname: Linux 3.2.0-31-generic-pae i686 ApportVersion: 2.0.1-0ubuntu13 Architecture: i386 DKMSKernelVersion: 3.2.0-31-virtual Date: Sun Oct 7 19:14:35 2012 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) PackageVersion: 5.100.82.38+bdcom-0ubuntu6.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build UpgradeStatus: Upgraded to precise on 2012-09-19 (17 days ago) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1064595] [NEW] bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build
Public bug reported: Hi, While workign on ubuntu 12.04 I used to get message like System internal Error. And which ended up saying that installing/loading some software/package resukt iin this System Error. I am not sure how critical it is. Please advice, Thanks, pooja ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1 [modified: usr/src/bcmwl-5.100.82.38+bdcom/src/wl/sys/wl_linux.c] ProcVersionSignature: Ubuntu 3.2.0-31.50-generic-pae 3.2.28 Uname: Linux 3.2.0-31-generic-pae i686 ApportVersion: 2.0.1-0ubuntu13 Architecture: i386 DKMSKernelVersion: 3.2.0-31-virtual Date: Sun Oct 7 19:16:14 2012 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) PackageVersion: 5.100.82.38+bdcom-0ubuntu6.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build UpgradeStatus: Upgraded to precise on 2012-09-19 (19 days ago) ** Affects: bcmwl (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1064595 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1064595/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1063327] Re: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1063327] [NEW] bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build
Public bug reported: While installing the virtual bos related software using the synaptic manage, it throw an error that System internal has faced some Error, report it. Whcih eventually has lead me to this link. thansk ProblemType: Package DistroRelease: Ubuntu 12.04 Package: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1 [modified: usr/src/bcmwl-5.100.82.38+bdcom/src/wl/sys/wl_linux.c] ProcVersionSignature: Ubuntu 3.2.0-31.50-generic-pae 3.2.28 Uname: Linux 3.2.0-31-generic-pae i686 ApportVersion: 2.0.1-0ubuntu13 Architecture: i386 DKMSKernelVersion: 3.2.0-31-virtual Date: Sun Oct 7 19:14:35 2012 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) PackageVersion: 5.100.82.38+bdcom-0ubuntu6.1 SourcePackage: bcmwl Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build UpgradeStatus: Upgraded to precise on 2012-09-19 (17 days ago) ** Affects: bcmwl (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 precise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1063327 Title: bcmwl-kernel-source 5.100.82.38+bdcom-0ubuntu6.1: bcmwl kernel module failed to build To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bcmwl/+bug/1063327/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 379166] Re: ping: sendmsg: No buffer space available wireless Jaunty Mini 9
echo 83886080 | sudo tee /proc/sys/net/core/wmem_max Did not help !! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/379166 Title: ping: sendmsg: No buffer space available wireless Jaunty Mini 9 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-backports-modules-2.6.28/+bug/379166/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
