[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Sorry to necro this thread, however i cannot get a sparklan WUBZ-103 (Fiberline WL-430U) working in Ubuntu. I have a large thread on http://ubuntuforums.org/showthread.php?t=1063274 2nd page post 16 onard has a lot of pertinent information. dmesg [ 1542.81] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 1542.171266] usb 1-1: configuration #1 chosen from 1 choice [ 1543.916095] usb 1-1: reset full speed USB device using uhci_hcd and address 2 [ 1544.088987] phy0: Selected rate control algorithm 'pid' [ 1544.380977] zd1211rw 1-1:1.0: phy0 [ 1544.382031] usbcore: registered new interface driver zd1211rw [ 1548.629133] firmware: requesting zd1211/zd1211b_ub [ 1548.831128] firmware: requesting zd1211/zd1211b_uphr [ 1550.071216] firmware: requesting zd1211/zd1211b_ub [ 1550.079421] firmware: requesting zd1211/zd1211b_uphr [ 1551.097617] usb 1-1: USB control request for firmware upload failed. Error number -110 [ 1551.097639] usb 1-1: Could not upload firmware code uph. Error number -110 [ 1551.097694] zd1211rw 1-1:1.0: couldn't load firmware. Error number -110 [ 2309.048123] usb 1-1: USB disconnect, address 2 [ 2314.300061] usb 1-1: new full speed USB device using uhci_hcd and address 3 [ 2314.476774] usb 1-1: configuration #1 chosen from 1 choice [ 2314.596090] usb 1-1: reset full speed USB device using uhci_hcd and address 3 [ 2314.774716] phy1: Selected rate control algorithm 'pid' [ 2314.779878] zd1211rw 1-1:1.0: phy1 [ 2319.137065] firmware: requesting zd1211/zd1211b_ub [ 2319.243689] firmware: requesting zd1211/zd1211b_uphr [ 2320.312573] firmware: requesting zd1211/zd1211b_ub [ 2320.320838] firmware: requesting zd1211/zd1211b_uphr [ 2321.341959] usb 1-1: USB control request for firmware upload failed. Error number -110 [ 2321.341981] usb 1-1: Could not upload firmware code uph. Error number -110 [ 2321.342023] zd1211rw 1-1:1.0: couldn't load firmware. Error number -110 Hope you guys can help, been trying to get advice from the devs for the Firmware without great success http://www.nabble.com/zd1211-and-ubuntu-8.1-problems-td21944941.html, so i'm unsure where the problem lies. Please can you help / point me in the right direction -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Thanks for testing and the update. I'll tentatively mark this Fix Released for Intrepid. Carlos, since you are the original bug reporter, if this is not resolved for you with Intrepid, please reopen this by setting the status back to New. Thanks. ** Changed in: linux (Ubuntu) Status: Confirmed = Fix Released ** Tags added: fixed-2.6.27 -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Fixed in Interpid. I can establish a connection now. -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test: 1) If you are comfortable installing packages on your own, the linux- image-2.6.27-* package is currently available for you to install and test. --or-- 2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD. Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback. ** Tags added: cft-2.6.27 -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
My hardy install has just developed this bug. It was working without error then I upgraded my computer with a new motherboard and CPU it was working previously with an old abit nf7-s and amd 2500+ processor put in new gigabyte ma-ga78gm-s2h with amd X2 5600 and now this starts happening anywhere from an hour or a few minutes and the wireless stops working the LED on the stick is no longer lit, replugging the stck lights the led but doesnt fix the problem lsusb hangs after the stick has gone dark, dmesg has hundreds of zd_chip_control_leds error -110 and error ioread32(CR_REG1): -110 kubuntu hardy knetworkmanager WPA2 encryption -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
I have this bug too. When zd1211rw module is loaded, I have a eth1 interface. I can configure it freely, but I cannot establish a conection. Switching to ndiswrapper driver helps: I get a wlan0 interface and the connection works (at least in 802.11b mode). Dmesg output is attached. ** Attachment added: dmesg.log http://launchpadlibrarian.net/16495847/dmesg.log ** Changed in: linux (Ubuntu) Status: Incomplete = Confirmed -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Hi guys. i was working on this. i have about 4 kernel updates in the past 2 months (2.6.24.16 to 2.6.24.19) and nothing solve the problem. I'd tried to use the upcoming ubuntu 8.10 beta kernel 2.6.25 and i just broke my instalation. The problem still present. someone has been able to solve the problem in any way different from use the ndiswrapper and the windows drivers? I mean, that way it works, but have a poor performance and some sporadic disconnections. i will appreciate someone with more knowledge and experience gets involve on this issue and maybe give us some light to solve it. by the way. it is the lsusb from my system using the 2.6.24.19 kernel. Bus 002 Device 001: ID : Bus 001 Device 004: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi Bus 001 Device 003: ID 041e:4058 Creative Technology, Ltd Bus 001 Device 001: ID : and this is part of the dmesg when i unplug the usb wireless stick and replug it some seconds later. [ 865.019346] usb 1-2: USB disconnect, address 2 [ 872.916060] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 873.049177] usb 1-2: configuration #1 chosen from 1 choice -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
I can say that up to me the problem is solved. See here: https://bugs.launchpad.net/ubuntu/+source/linux- source-2.6.17/+bug/63664/comments/35 -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Same problem: ZyXEL G-220-v2 USB wireless worked in Ubuntu 7.10 but not in booting up 8.04 Live CD. I use WPA2 encryption. It appears to associate with AP but cannnot ping it, and wpa_cli output indicates it loses connection: === wpa_cli === # wpa_cli status Selected interface 'eth1' bssid=00:13:10:[xx.xx.xx] ssid=mySSID id=0 pairwise_cipher=CCMP group_cipher=CCMP key_mgmt=WPA2-PSK wpa_state=4WAY_HANDSHAKE But then, immediately issue a second wpa_cli: # wpa_cli status Selected interface 'eth1' wpa_state=ASSOCIATING Successive invocations of wpa_cli give the same result. Some more maybe useful data: lsusb = # lsusb Bus 003 Device 003: ID 0457:0151 Silicon Integrated Systems Corp. Super Flash 1G B Flash Drive Bus 003 Device 002: ID 0586:340f ZyXEL Communications Corp. Bus 003 Device 001: ID : Bus 002 Device 001: ID : Bus 001 Device 001: ID : = dmesg [edited] [ 191.094724] zd1211rw 3-1:1.0: firmware version 4725 [ 191.134660] zd1211rw 3-1:1.0: zd1211b chip 0586:340f v4810 high 00-19-cb AL22 30_RF pa0 g---S [ 203.725715] SoftMAC: Open Authentication completed with 00:12:17:33:dc:6c [ 224.576749] eth1: no IPv6 routers present [ 603.667561] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 604.020343] NET: Registered protocol family 17 [ 604.373045] SoftMAC: Open Authentication completed with 00:13:10:ce:d9:6e [ 604.383607] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ... [ 625.963615] zd1211rw 3-1:1.0: error ioread32(CR_REG1): -110 = iwconfig == # iwconfig eth1 eth1 IEEE 802.11b/g ESSID:mySSID Nickname:zd1211 Mode:Managed Frequency:2.437 GHz Access Point: 00:13:10:xx.xx.xx Bit Rate=1 Mb/s Encryption key:off Link Quality=77/100 Signal level=29/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 = Fedora 9 same problem == I then tried live booting fedora 9 and had similar problem and same ioread error in dmesg. It works fine in Ubuntu 7.10 and OpenSUSE 10.3 (kernel 2.6.22). -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Hi Guys, Just to see if it makes a difference, care to test the upcoming Intrepid Ibex 8.10 kernel? It was most recently rebased with the upstream 2.6.25 kernel and is currently available in the following PPA: https://edge.launchpad.net/~kernel-ppa/+archive If you are not familiar with how to install packages from a PPA basically do the following . . . Create the file /etc/apt/sources.list.d/kernel-ppa.list to include the following two lines: deb http://ppa.launchpad.net/kernel-ppa/ubuntu hardy main deb-src http://ppa.launchpad.net/kernel-ppa/ubuntu hardy main Then run the command: sudo apt-get update You should then be able to install the linux-image-2.6.25 kernel package. After you've finished testing you can remove the kernel- ppa.list file and run 'sudo apt-get update' once more. Please let us know your results. Thanks -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Hello, I have the same problem. USB wireless with zd1211rw driver, statically configured wireless network - no NetworkManager. Randomly at boots I get the 'link not ready message' and the network is down. Other times it works just fine. I had no problem with Gutsy, now I'm using Hardy with all updates applied. One important note: when at boot the network is down, in order to bring it up I have found that the two following commands usually works: sudo ifdown eth1 sudo ifup eth1 I've tried to add those commands to my rc.local file, but the situation didn't get any better. Please let us know if you want any other detail. Dmesg is attached, lsusb: Bus 003 Device 001: ID : Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize064 idVendor 0x idProduct 0x bcdDevice2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct2 UHCI Host Controller iSerial 1 :00:11.4 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable0x00 PortPwrCtrlMask0xff Hub Port Status: Port 1: .0100 power Port 2: .0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID : Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize064 idVendor 0x idProduct 0x bcdDevice2.06 iManufacturer 3 Linux 2.6.24-16-generic uhci_hcd iProduct2 UHCI Host Controller iSerial 1 :00:11.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable0x00 PortPwrCtrlMask0xff Hub Port Status: Port 1: .0100 power Port 2: .0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Hi Leann here is my lsusb and full dmesg. lsusb output Bus 002 Device 003: ID 0ace:1211 ZyDAS 802.11b/g USB2 WiFi Bus 002 Device 002: ID 041e:4058 Creative Technology, Ltd Bus 002 Device 001: ID : Bus 001 Device 001: ID : ** Attachment added: dmesg.txt http://launchpadlibrarian.net/14545150/dmesg.txt -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 227149] Re: USB Wireless zd1211 based not working in hardy's kernel
Hi Carlos, Just curious if you can provide the output of lsusb as well as your full dmesg output. Thanks ** Changed in: linux (Ubuntu) Status: New = Incomplete -- USB Wireless zd1211 based not working in hardy's kernel https://bugs.launchpad.net/bugs/227149 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs