Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
hagensieker wrote: My only remaining issue is that the squeezelite process seems to die daily. I stop the music at night when I go to bed and in the morning squeezelite is dead. I can ssh back in and type squeezelite or reboot the Pi to get it to work but it just won't stay going. Not sure what to do. I set for autodiscovery but used the Pi's address. I'm thinking I should try something else or set it to 127.0.0.1 or something. If it is the squeezelite process actually dying as you say, you could create a cron job (that runs every hour say) that looks for the process having stopped and if it has restarts it. Relatively straight forward to do. slackhead's Profile: http://forums.slimdevices.com/member.php?userid=13963 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
Hello Thank you for this great tool, just installed on my Pi to replace a Squeezebox.Running fine with Synology as main server (LMS) I'm looking how to play automatically a radio station (or one of my favorite) just after the boot. Squeezelite is started automatically, but the music/radio is not launched automatically ? IS there a specifis parameter to use on squeezelite to play radio directly ? Thank you Thomas tparvais's Profile: http://forums.slimdevices.com/member.php?userid=59976 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
Hi Triode, Is there anyway to control Jivelite on the wandboard from a PC? I'm just being lazy and not wanting to connect and disconnect a keyboard from the wandboard or spend 25GBP on a flirc for an occasional change I want to make. CW Chunkywizard's Profile: http://forums.slimdevices.com/member.php?userid=25868 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
Chunkywizard wrote: 1. I was away for 2 days early part of the week and I came home to find LMS crashed. Not sure what info I can supply to help find out why but I needed to restart it to get players to connect to it. Anything in the log file before you restarted it? Chunkywizard wrote: 2. I am getting errors in my scan, looks like from foreign language characters: Is your music mounted from a ntfs partition or cifs share? I had some issues with non-ascii chars, (Motorhead with the umlaut above the o, ISTR), and a cifs mount that were solved by adding iocharset=utf8 to the cifs mount options in fstab. (LMS is started with SQUEEZEBOX_CHARSET=utf8 from /etc/sysconfig/squeezeboxserver.) JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
Is there anyway to control Jivelite on the wandboard from a PC? I'm just being lazy and not wanting to connect and disconnect a keyboard from the wandboard or spend 25GBP on a flirc for an occasional change I want to make. JiveLite is a controlling application, not a player. What you want to do is control the player. Run SqueezePlay (or JiveLite...) on your PC instead. -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
mherger wrote: That's not what I'm seeing. I installed the plugin on top of 7.8 (with LocalFile support), and it would always register the plugin's protocol handler. That's fine, and expected. Either way we end up with the behaviour we want, if the squeezelite instance has sent the 'loc' capability to the server. JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
Triode wrote: I'd like to get confirmation that the patched protocol handler with the check for !$song-track-virtual works ok with CUE sheets. I can't remember whether I told you It worked for me, but I was only able to test with one file. Triode wrote: I think we then need to discuss whether this should be a default off option for the standard server or possibly default on? I don't think there is any downside from having it enabled by default. JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
mherger wrote: Done. Please verify - thanks! Verified! LOGITECHMEDIASERVER-7.8.0-0.20.20130515GIT1368635484 Update... Code: sudo yum --enablerepo=community-squeeze-testing update logitechmediaserver Changes... Code: * Wed May 15 2013 - 7.8.0-0.20.20130515git1368635484 - Latest git revision 1368635484. - Drop lms-server-warnings.patch. - Drop lms-server-Slim-SqueezePlay-pcm-max-rate.patch. - Drop lms-server-Slim-LocalFile.patch. - Drop lms-server-fedora.patch. * Wed May 15 2013 - 7.8.0-0.19.20130514git1368481770 - Test using perl 5.14 with 5.16 patch set. JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
Hello, The Pi and usb dac has been delivered and after two nights of installing PiCorePlayer, LMS etc it is working like a charm. I am able to play High res 24bit/96Khz without problems. I did had a hick up after playing internet radio (linn radio at 320kbps) After the first song ended and the next song started the sound got bad. A restart of the Pi got it right again. After that i did not try radio again. Shutdown's Profile: http://forums.slimdevices.com/member.php?userid=59790 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
slackhead wrote: If it is the squeezelite process actually dying as you say, you could create a cron job (that runs every hour say) that looks for the process having stopped and if it has restarts it. Relatively straight forward to do. I haven't completely ruled everything out yet. I was running headless with my wireless dongle and USB DAC in the R Pi usb ports. Might be a power thing but I don't think so. I'll eliminate all the hardware stuff first before I start asking for help with the log files. I also was using a Logitech wifi dongle that was getting pretty hot. Every once in a while I'd get a pop in there that I'm pretty sure was usb or wifi related. I swapped the dongle and we'll see what happens tonight and tomorrow morning. Could just be squeezelite crashing too. John hagensieker's Profile: http://forums.slimdevices.com/member.php?userid=59959 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
hagensieker wrote: I added the code as per this web page. [url]http://www.raspberrypi.org/phpBB3/viewtopic.php?t=31241p=270802[/url Thanks. PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
Hi Michael, I am using Jivelite on the wandboard to drive a monitor for now playing information from the onboard Squeezelite player. So normally it is just set and forget to 'Now Playing' after I have chosen the player. However I have seen after reboots Jivelite goes back to the menu screen rather than Now Playing and I have to connect a keyboard to get back my Now Playing screen. I was just trying to do this configuration remotely via a PC rather than connecting a keyboard to the wandboard. Is this possible? If not is there some configuration file or some such way to make JiveLite always boot into Now Playing? CW Chunkywizard's Profile: http://forums.slimdevices.com/member.php?userid=25868 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
KERNEL-WAND-3.0.35-CM43 Updated kernel includes 160 patches from 'Freescale git' (http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/log/?h=imx_3.0.35_4.0.0) (rel_imx_3.0.35_4.0.0) that have been sync'd into 'Wandboard git' (http://repo.or.cz/w/wandboard.git/shortlog/refs/heads/wandboard). (Reverted ENGR00254267 MX6DL/MX6SL max freq: Fix max cpu freq at 1G on MX6DL ARD. Results in the loss of 1GHz core speed. 800MHz is the max with patch applied.) The latest kernels have dependencies on a new uboot package. The uEnv.txt file is no longer included in the kernel package, it is contained in uboot-wandboard-env. I screwed up a little when making the switch, not providing a clean upgrade path. So if you have any kernels installed, older than cm39+. eg. kernel-wand-3.0.35-cm38+.fc18, you need to remove them before installing the update, or you wont be able to install the update due to a conflict with uEnv.txt being owned by two packages. So basically, you run... Code: $ rpm -q kernel-wand kernel-wand-3.0.35-cm38+.fc18.armv7hnl kernel-wand-3.0.35-cm37+.fc18.armv7hnl ... which will list the kernels you have installed. Any with a lower number than cm39 in the name, you remove them. eg. Code: sudo yum remove kernel-wand-3.0.35-cm38+.fc18 kernel-wand-3.0.35-cm37+.fc18 (NB. Use the package name returned by the rpm -q, without the .armv7hnl!) Now you install the new kernel... Install... Code: sudo csos-cleanInstall-testing kernel-wand-3.0.35-cm43.fc18 Changes... Code: * Tue May 14 2013 - 3.0.35-cm43 - Revert ENGR00254267.patch. * Tue May 14 2013 - 3.0.35-cm42 - Update to latest wandboard git 8d5d7282de02a8d3a0f07477f10ce16092ed7c8f. Anyone not interested in the techy stuff, stop reading. Wandboard uboot is included in mainline uboot since 2013.04 release. F18 ARM uses 2012.10. The uboot src rpm I have created for the 2013.04 release does not replace the Fedora uboot package. It just adds 3 new packages, uboot-wandboard-dl, (which contains the uboot imx binary for the dual lite board), uboot-wandboard-solo (which contains the uboot imx binary for the solo board), and uboot-wandboard-env, (which contains uEnv.txt). Too much of a risk to use the 2013.04 release for omap, tegra and every other platform that is built from the Fedora uboot. I can't validate, so I have left alone. (I still want the CSOS image to work on the BeagleBone, which it currently does.) When Fedora switches to a later uboot source, which supports the Wandboard, we'll build from that and drop our standalone package. JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
I am using Jivelite on the wandboard to drive a monitor for now playing information from the onboard Squeezelite player. So normally it is just set and forget to 'Now Playing' after I have chosen the player. However I have seen after reboots Jivelite goes back to the menu screen rather than Now Playing and I have to connect a keyboard to get back my Now Playing screen. Wouldn't it jump to Now Playing once you start playback on the controlled player? NP is a screensaver, by default configured to be used while playing. You might check the Display/Screensaver settings, probably decrease the timeout. -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: JiveLite - cut down squeezebox control application
mherger wrote: I am using Jivelite on the wandboard to drive a monitor for now playing information from the onboard Squeezelite player. So normally it is just set and forget to 'Now Playing' after I have chosen the player. However I have seen after reboots Jivelite goes back to the menu screen rather than Now Playing and I have to connect a keyboard to get back my Now Playing screen. Wouldn't it jump to Now Playing once you start playback on the controlled player? NP is a screensaver, by default configured to be used while playing. You might check the Display/Screensaver settings, probably decrease the timeout. -- Michael Thanks for the advice. Currently it doesn't jump back but I'll play with the settings like you said. Thanks CW Chunkywizard's Profile: http://forums.slimdevices.com/member.php?userid=25868 View this thread: http://forums.slimdevices.com/showthread.php?t=98156 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS Ubuntu help, please!
Hello all, I managed to mess up my system by putting (I think) too many contradictory commands into the terminal. I have therefore done a clean install of ubuntu, but now can't get LMS working at all. It won't connect to http://127.0.0.1:9000 , I just get a sorry, the website can't be found message. The Software Centre said that LMS ahd installed, so I really don't know what to do next. Thanks in advance for any help. jhnpennington's Profile: http://forums.slimdevices.com/member.php?userid=50163 View this thread: http://forums.slimdevices.com/showthread.php?t=98766 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
JackOfAll wrote: ...you need to remove them before installing the update, or you wont be able to install the update due to a conflict with uEnv.txt being owned by two packages... Clive, Just a clarification. As I want to build the kernel as per your instructions in post #643, before doing it, shall I remove any kernels installed, older than cm39+? Did I understand it tcorrectly? Thanks a lot! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
albertone74 wrote: Just a clarification. As I want to build the kernel as per your instructions in post #643, before doing it, shall I remove any kernels installed, older than cm39+? Did I understand it tcorrectly? Correct, Alberto. (Don't forget to substitute cm43 for cm41 in the instructions. And when you copy the kernel binary rpm from the desktop machine to the WB, install it with yum so it pulls the uboot-wandboard-* dependency packages from the repo. ie. sudo yum install ./kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm. It'll probably complain that your kernel package is not signed, which is OK to ignore, just press 'Y' to continue.) JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
JackOfAll wrote: Correct, Alberto. (Don't forget to substitute cm43 for cm41 in the instructions. And when you copy the kernel binary rpm from the desktop machine to the WB, install it with yum so it pulls the uboot-wandboard-* dependency packages from the repo. ie. sudo yum install ./kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm. It'll probably complain that your kernel package is not signed, which is OK to ignore, just press 'Y' to continue.) Great! Thanks! Can't wait to give it a go:) albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
Hi Clive, I updated the kernel and everything went very smoothly. Do you need any tests done? Secondly, one thing I have noticed is my plugins page on LMS is corrupted (see attached screenshot). I have seen this a few times after I have reimaged and I don't know what caused it, or how to fix it. It's not a real problem until you want to add a plugin then there is no mechanism to do so. Any ideas how to fix it? (I want to add in database query) The corruption seems to occur after rescanning and adding back in trackstat info on the occasions I have seen it, but I don't know if that is the cause. I reckon I could replicate, but then again one time you look at the screen its fine and then the next time you look at it then its like this so I am not sure I could provide steps to replicate (I would just play around with plug ins until it corrupted). CW14848 +---+ |Filename: plugins.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=14848| +---+ Chunkywizard's Profile: http://forums.slimdevices.com/member.php?userid=25868 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
Chunkywizard wrote: Hi Clive, I never got to the log before I restarted and the 1000 line buffer was full with other stuff. I'll definitely check if I see it again. Regarding the non-ascii characters, you are exactly right, its on a cifs share and I don't have that option in fstab. I'll add it now and rescan and see if that fixes it. [Edit] yep, all working fine now, thanks for the pointer. Cheers CW I'm quoting the above because I have encountered a similar problem but with the metadata from a radio stream - not sure if this falls under the same problem area. Playing Classic FM via latest LMS on a Touch - this displays track titles and album art. I noticed that a title displayed as 'espan?ola' and not 'española'. castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
Chunkywizard wrote: Hi Clive, I updated the kernel and everything went very smoothly. Do you need any tests done? Secondly, one thing I have noticed is my plugins page on LMS is corrupted (see attached screenshot). I have seen this a few times after I have reimaged and I don't know what caused it, or how to fix it. It's not a real problem until you want to add a plugin then there is no mechanism to do so. Any ideas how to fix it? (I want to add in database query) The corruption seems to occur after rescanning and adding back in trackstat info on the occasions I have seen it, but I don't know if that is the cause. I reckon I could replicate, but then again one time you look at the screen its fine and then the next time you look at it then its like this so I am not sure I could provide steps to replicate (I would just play around with plug ins until it corrupted). CW14848 This is the server's built in plugin page - if you enable Extension Downloader then you will see the more complete plugin page including ablity to download and install additional plugins. Triode's Profile: http://forums.slimdevices.com/member.php?userid=17 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
Thanks Triode, I never knew that! I guess I must have disabled that plugin when I was getting rid of all the stuff I don't use. Thanks for your help - user error again! CW Chunkywizard's Profile: http://forums.slimdevices.com/member.php?userid=25868 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
JackOfAll wrote: Correct, Alberto. (Don't forget to substitute cm43 for cm41 in the instructions. And when you copy the kernel binary rpm from the desktop machine to the WB, install it with yum so it pulls the uboot-wandboard-* dependency packages from the repo. ie. sudo yum install ./kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm. It'll probably complain that your kernel package is not signed, which is OK to ignore, just press 'Y' to continue.) Clive, Hope you can help me out with this. After downloading the kernel source rpm, I have tried to build it but I am getting the following: Code: [root@localhost SRPMS]# rpmbuild --rebuild --target armv7hnl --define cross_compile arm-linux-gnu- kernel-wand-3.0.35-cm43.fc18.src.rpm error: cannot open kernel-wand-3.0.35-cm43.fc18.src.rpm: No such file or directory [root@localhost SRPMS]# I don't get what I am doing wrong! Thanks a lot! albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
JackOfAll wrote: Yes, don't use root user! Create a normal non-privileged user and run rpmdev-setuptree as the normal user, to create the ~/rpmbuild directory structure. Thanks! I have created a normal user but I am still getting the same error message: Code: [fedora@localhost ~]$ rpmdev-setuptree [fedora@localhost ~]$ cd ~/rpmbuild/SRPMS [fedora@localhost SRPMS]$ wget http://www.communitysqueeze.org/repo/18/testing/armhfp/kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm --2013-05-16 20:25:15-- http://www.communitysqueeze.org/repo/18/testing/armhfp/kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm Resolving www.communitysqueeze.org (www.communitysqueeze.org)... 85.158.46.143 Connecting to www.communitysqueeze.org (www.communitysqueeze.org)|85.158.46.143|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 8662040 (8.3M) [application/x-redhat-package-manager] Saving to: kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm 100%[==] 8,662,040416KB/s in 21s 2013-05-16 20:25:36 (402 KB/s) - kernel-wand-3.0.35-cm43.fc18.armv7hnl.rpm saved [8662040/8662040] [fedora@localhost SRPMS]$ rpmbuild --rebuild --target armv7hnl --define cross_compile arm-linux-gnu- kernel-wand-3.0.35-cm43.fc18.src.rpm error: cannot open kernel-wand-3.0.35-cm43.fc18.src.rpm: No such file or directory [fedora@localhost SRPMS]$ What could it be Clive? albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
albertone74 wrote: What could it be Clive? Download the src rpm, not the binary. Code: wget http://www.communitysqueeze.org/repo/18/testing/SRPMS/kernel-wand-3.0.35-cm43.fc18.src.rpm JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
JackOfAll wrote: Download the src rpm, not the binary. Code: wget http://www.communitysqueeze.org/repo/18/testing/SRPMS/kernel-wand-3.0.35-cm43.fc18.src.rpm Great! That worked like a charm Clive. Thanks. But now I am getting the following: :) Code: Installing kernel-wand-3.0.35-cm43.fc18.src.rpm warning: kernel-wand-3.0.35-cm43.fc18.src.rpm: Header V4 RSA/SHA1 Signature, key ID a2b76ec4: NOKEY warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root warning: user clivem does not exist - using root warning: group clivem does not exist - using root Building target platforms: armv7hnl Building for target armv7hnl error: Failed build dependencies: lzma is needed by kernel-wand-3.0.35-cm43.fc18.armv7hnl albertone74's Profile: http://forums.slimdevices.com/member.php?userid=23863 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Fedora 18 Upgrade appears to break LMS 7.7.2 and 7.7.3
JackOfAll wrote: Verified! LOGITECHMEDIASERVER-7.8.0-0.20.20130515GIT1368635484 Update... Code: sudo yum --enablerepo=community-squeeze-testing update logitechmediaserver Changes... Code: * Wed May 15 2013 - 7.8.0-0.20.20130515git1368635484 - Latest git revision 1368635484. - Drop lms-server-warnings.patch. - Drop lms-server-Slim-SqueezePlay-pcm-max-rate.patch. - Drop lms-server-Slim-LocalFile.patch. - Drop lms-server-fedora.patch. * Wed May 15 2013 - 7.8.0-0.19.20130514git1368481770 - Test using perl 5.14 with 5.16 patch set. Seems to be okay on Cubieboard. castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=97862 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] Bluetooth source audio
Hi dudes, Got an LMS system setup in my house, running 4 zones on 3 raspberry pi's. Wondering if anyone knows of a solution that would allow me to push bluetooth audio out from my laptop, phone, etc to my LMS server pi (which would have a bluetooth dongle). I know it _can_ be done (in theory only) as I currently can do this in my car from iPhone to asus eee car-pc (running windows xp). Cheers Ste SteUK's Profile: http://forums.slimdevices.com/member.php?userid=59485 View this thread: http://forums.slimdevices.com/showthread.php?t=98787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS R3
albertone74 wrote: Great! That worked like a charm Clive. Thanks. But now I am getting the following: :) Code: error: Failed build dependencies: lzma is needed by kernel-wand-3.0.35-cm43.fc18.armv7hnl If when you try and build from a src rpm you get a failed build dependency, just install it. So Code: sudo yum install lzma ... and run the build again. JackOfAll's Profile: http://forums.slimdevices.com/member.php?userid=3069 View this thread: http://forums.slimdevices.com/showthread.php?t=98544 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix