Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
Liffy99, Which Edimax device are you using? Some of them are a bit finicky and the do use slot of power. Please go to the diagnostics page on the pCP device and look at the dmesg section. Look for voltage warnings. Paul piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
Nickdanp, You are missing pressing the install button on on the card control page piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
mcduman wrote: > Good reading from klaus re: slimserver sox binaries vs generic ones from > your favourite distro vs self-compiled ones. Without the flac patches some functionality will be lost - IIRC transcoding stream will stop after 2hrs30mins. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
bpa wrote: > There were patches to flac for slimserver - these may not be in the > version of flac from another repo. Good reading from klaus re: slimserver sox binaries vs generic ones from your favourite distro vs self-compiled ones. https://soundcheck-audio.blogspot.com/2018/04/sox-on-steroids.html mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
System: FLAC library / Qobuz streaming on IMac running LMS v7.9 Raspbery Pi3 / Allo Digione running Picoreplayer v3.5 (with Edimax wifi dongle) Ipad used as controller via Squeezepad Every day I have no problems playing music with this set up. Everyday, at some point in late afternoon / evening (I cannot pin the time down) the system loses its link with the server. The Imac is internet connected. (Its ethernet cabled to the router with its own internal Wifi off). I can access the IP addresses of Picoreplayer, the router, and other equipment. I cannot access the IP address of the Imac (eg 192.18.1.111:9000 for LMS The RPi shows its power light, the Wifi indicator continues to flash. The only solution seems to be a repeated hard reboot of the Pi. I have tried using (and not) wake on LAN I cannot see any sleep settings that would interfere (ie turn the Imac off) It makes no sense with the system working fine, and then not, with no changes being made anywhere. Any clues where to look ? liffy99's Profile: http://forums.slimdevices.com/member.php?userid=7832 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
Hi, Apologies if this is a dumb question, but I cannot get Bluetooth to work on two RPis - a Model 3 and a Model 3B+ - which makes me think I'm missing something fundamental. Basically I disable built-in Wi-Fi and enable built-in Bluetooth. No problem. Reboot when done. But when I go to enable Bluetooth Audio and save/reboot I get Squeezelite not running and when I click Card Control I see BT Controller is Off, Connect Daemon is not running and BT Device is Not Connected. Additionally Show Logs is greyed out. I've tried wiping the card and starting from scratch with PiCorePlayer 3.5.0 (non audio), but the same problem persists. It's as if the built-in Bluetooth isn't being switched on or detected - have I missed a fundamental step in the process or is it something deeper? Many thanks for any advice you can offer me. nickdanp's Profile: http://forums.slimdevices.com/member.php?userid=68221 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
ralphy wrote: > Setting the Max sample rate to 96000 on the squeezelite settings page > will cause LMS to downsample on-the-fly all content with a higher sample > rate. > > 25171 > > This is equivalent to adding -r 96000 to the squeezelite command line. > > Make sure not to have any values in the Upsample setting as this causes > squeezelite to do resampling, not LMS. Hi Ralphy, many thanks! That is what I tried first and trying to play a 192/24 file resulted in "unsupported sample rate" error. At that point I thought that was because I left the upsample setting empty. Meanwhile I have tried this: max sample rate: "44100,48000,88200,96000" upsample setting: "E" This setting works after I cleared the "Restrict codec setting" which was filled with "pcm,alac,mp3" before in order to have LMS send out PCM. Probably your suggestion would have worked too if I had cleared that setting before. Is my setting in effect any different from your suggested setting? Or is my setting now resampling on pCP client instead of LMS server? Resampling on LMS server would of course be preferable. Best regards Stefan steklo's Profile: http://forums.slimdevices.com/member.php?userid=67653 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
steklo wrote: > Hello, > > maybe there is some experienced pCP user around here who might help me > to find the right upsampling settings in pCP (RPi) to have LMS (NAS) > downsample all highres files beyond 96/24 which is the maximum my DAC > can process without touching the DAC supported resolutions 96 > kHz? I started a specific thread here: > https://forums.slimdevices.com/showthread.php?109106-downsampling-files-beyond-96-24-on-the-fly > As this question is also very pCP related I thought it might make sense > to ask for support here too. Please contribute your answers in the > existing thread I linked above. > > Thanks, > Stefan Setting the Max sample rate to 96000 on the squeezelite settings page will cause LMS to downsample on-the-fly all content with a higher sample rate. 25171 This is equivalent to adding -r 96000 to the squeezelite command line. Make sure not to have any values in the Upsample setting as this causes squeezelite to do resampling, not LMS. +---+ |Filename: max96000.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=25171| +---+ Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.5.0
mcduman wrote: > It should be said that I have replaced the slimserver sox and flac > binaries (from when the pyramids were built -hi @mherger-) with those > from the tinycore repo (still ancient but at least from when electricity > was invented) with fantastic results. There were patches to flac for slimserver - these may not be in the version of flac from another repo. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=108852 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix