Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?
Tidal got stuck again, today, and I tried a few more things. - On the Receiver, the MPEG-4 podcast did not play, either. It showed the same behaviour as tracks from Tidal, i.e. re-buffering and now and then playing a few seconds. - On squeezelite, Tidal tracks would still play, but they had some trouble taking off. The clock would start counting, but no music would play. After a few seconds, the music would follow, get stuck again, and start over. After one or two attempts and the occasional stuttering, the entire track less the first few seconds would play without any problem. It was the same for all tracks I tried. - On squeezelite, the MPEG-4 podcast played without any problems whatsoever. - Today, the piCorePlayer web interface was not working properly, either. The CPU temperature display for example would run into a "connection reset" error more often than not. I just restarted the LMS (took a few retries to load the LMS page), and the pCP web interface is back. Memory consumption of the LMS was at more than 210 MB and is back to 103 MB, now. Tidal tracks are playing properly again on the Receiver and on squeezelite. scaleo home server 2105 & picoreplayer 6.1.0 | logitech media server 8.0.0 | server power control 20120716.103808 | transporter & duet & touch & boom & radio | rotel rc-995 & rmb-100 | nubert nuvero 140 mvordeme's Profile: http://forums.slimdevices.com/member.php?userid=22892 View this thread: http://forums.slimdevices.com/showthread.php?t=113321 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
mherger wrote: > > Radio paradise will not work with IFT, either in my configuration: > > Which particular transcoding rule?l mcduman said the "flc pcm" which seems to have been changed from IFT to FT as part of thte "tdlflc" change. There is some other piece of information missing because it is unusual for the "flc pcm" rule to be invoked and not the "flc flc transcoding" bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
Radio paradise will not work with IFT, either in my configuration: Which particular transcoding rule? -- Michael ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer Documentation
Added Models and Recommendations to Components - "'Raspberry Pi' (https://docs.picoreplayer.org/components/raspberry_pi/)". Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=112996 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] LMS very unresponsive after upgrade from 7.9.1 to 7.9.2
GoodVibrations wrote:
> OK workaround.
> But I guess you'll have an unresponsive system as soon as you scan for a
> new album.
>
There are two options in TrackStat for its refresh operation, one for
refresh at startup and one for refresh after rescan, if you disable both
in TrackStat settings page you should not have the problem that LMS
hangs. The side effect of disabling them is that you will loose some of
the smart logic in TrackStat, primarily related to not loosing data if
you rename or move music files. If you dont rename/move music files you
are probably fine with having both these options disabled.
GoodVibrations wrote:
>
> I don't think a solution is on the horizon.
> Just a few weeks ago, Erland offered to let another take over the
> maintenance of his plugins. So he clearly has no time himself. Don't
> know if he even uses LMS anymore?
>
> So, I'm still on 7.9.1. :-)
>
I use LMS 7.8.0, unfortunately my current setup cant run any later LMS
version. Havent updated the Ubuntu OS for a long time and the old
Ubuntu version Im using breaks newer LMS versions. Unfortunately my
spare time is a bit limited at the moment so I will likely not have the
time to look into this in more detail in the foreseeable future.
Erland Isaksson ('My homepage' (http://erland.isaksson.info))
Developer of 'many plugins/applets'
(https://wiki.slimdevices.com/index.php/User_Erland.html)
erland's Profile: http://forums.slimdevices.com/member.php?userid=3124
View this thread: http://forums.slimdevices.com/showthread.php?t=112388
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
slartibartfast wrote: > I use that plugin. Do you know what the issue is? Never used it so don't know it's charactertistics but I can guess. User is playing Flac stream and possibly it has to be resampled or user has disabled Flac to player. I'll probably test to understand the issue. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
bpa wrote: > I think this is only with Radio Paradise / Flac which requires the > special Lossless Radio Paradise plugin.I use that plugin. Do you know what > the issue is? Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
slartibartfast wrote: > Is there an issue with Radio Paradise? I think this is only with Radio Paradise / Flac which requires the special Lossless Radio Paradise plugin. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
mcduman wrote: > Radio paradise will not work with IFT, either in my configuration: > > Logitech Media Server Status > Logitech Media Server Version: 8.0.1 - 1606756069 @ Mon Nov 30 > Operating system: Windows 10 - EN - cp1252 > > piCorePlayer > Player Model: SqueezeLite > Player Type: squeezelite > Firmware: v1.9.8-1294Is there an issue with Radio Paradise? Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Hifiberry Dac+ Pro and RPI4 combo not working
paul- wrote: > It should be fine, but then I'm not sure why 6.1 doesn't work with that > card. Perhaps there was a patch made in later kernels than pcp 6.1 > uses. O.K., thanks. A bit strange that this hasn't, yet, come up for anyone else. But, if it does, at least there's a solution out there, now. I guess if the official release doesn't work, I can always go back to this beta.but, I suspect you're right in that the official 7.0 will be fine. Rg System information Main: SGC microJukebox> RPI4B/piCoreplayer/Squeezelite > USB>RME ADI-2 DAC > Benchmark AHB2 > Revel Performa F208 speakers, 2X REL R-305 subs. Home Theatre: Pioneer VSX 919 > Energy Take 5 Classic 5.1. LMS 7.9.2 - 0.8.20181005git1538738519 on a 1TB microJukebox Vortexbox Appliance, SonicOrbiter V 2.7. rgro's Profile: http://forums.slimdevices.com/member.php?userid=34348 View this thread: http://forums.slimdevices.com/showthread.php?t=113343 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
bpa wrote: > This is specific to Tidal to fix problems with "IFT" in the normal > rules. It would not be used with Radio Paradise. > > > This rule was not part of this discussion. But the issue in this thread > showed that "IFT" cannot work if there is a "$START$" so the "working" > rule may have had a latent fault which has now been exposed. It sounds > like radio Paradise only works with "IFT". I don't know Radio Paradise > / Flac so you should give all the details of your system in case it is a > specifc combination of LMS version and player type and radio Paradise > Flac. > > What sort of player do you have ? > What version of LMS ? > > The generic solution that Philippe_44 is investigating is intended to > fix the underlying problems that "tdlflc" type was needed to fix and so > avoid requiring a "pdiseflac" type solution. Radio paradise will not work with IFT, either in my configuration: Logitech Media Server Status Logitech Media Server Version: 8.0.1 - 1606756069 @ Mon Nov 30 Operating system: Windows 10 - EN - cp1252 piCorePlayer Player Model: SqueezeLite Player Type: squeezelite Firmware: v1.9.8-1294 mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
mcduman wrote:
> i meant
>
> tdlflc pcm * *
> # IFT:{START=--skip=%t}U:{END=--until=%v}
> [flac] -dcs --force-raw-format --endian=little --sign=signed $START$
> $END$ -- $FILE$
>
> which works.
>
This is specific to Tidal to fix problems with "IFT" in the normal
rules. It would not be used with Radio Paradise.
>
> I also have in convert.conf
>
> flc pcm * *
> # FT:{START=--skip=%t}U:{END=--until=%v}
> [flac] -dcs --force-raw-format --endian=little --sign=signed $START$
> $END$ -- $FILE$
>
> which does not work with radio paradise
This rule was not part of this discussion. But the issue in this thread
showed that "IFT" cannot work if there is a "$START$" so the "working"
rule may have had a latent fault which has now been exposed. It sounds
like radio Paradise only works with "IFT". I don't know Radio Paradise
/ Flac so you should give all the details of your system in case it is a
specifc combination of LMS version and player type and radio Paradise
Flac.
What sort of player do you have ?
What version of LMS ?
The generic solution that Philippe_44 is investigating is intended to
fix the underlying problems that "tdlflc" type was needed to fix and so
avoid requiring a "pdiseflac" type solution.
bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806
View this thread: http://forums.slimdevices.com/showthread.php?t=113308
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Hifiberry Dac+ Pro and RPI4 combo not working
It should be fine, but then I'm not sure why 6.1 doesn't work with that card. Perhaps there was a patch made in later kernels than pcp 6.1 uses. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=113343 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Overlay for DAC audiophonics i-sabre ES9023 in PcP 6.0.0?
looks like to me that the font file is not found. The freetype package doesn't include fonts. But I don't do much with freetype. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=111835 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Overlay for DAC audiophonics i-sabre ES9023 in PcP 6.0.0?
Hi Paul, Shouldn't pip list show all packages? I think there is something up with the freetype package in reference to my previous post. Patrick pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342 View this thread: http://forums.slimdevices.com/showthread.php?t=111835 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
bpa wrote:
> Specifically which rule are you talking about ? This change affects the
> "flc flc transcoding" rule.
i meant
tdlflc pcm * *
# IFT:{START=--skip=%t}U:{END=--until=%v}
[flac] -dcs --force-raw-format --endian=little --sign=signed $START$
$END$ -- $FILE$
which works.
I also have in convert.conf
flc pcm * *
# FT:{START=--skip=%t}U:{END=--until=%v}
[flac] -dcs --force-raw-format --endian=little --sign=signed $START$
$END$ -- $FILE$
which does not work with radio paradise
mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702
View this thread: http://forums.slimdevices.com/showthread.php?t=113308
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
mcduman wrote: > i read the discussion here between you fine people with great interest > (although i miss some of the points). what i am curious to know is the > following: the new flc pcm conversion rule using [flac] for tidal > streams does not work with radio paradise. why is this the case? Specifically which rule are you talking about ? This change affects the "flc flc transcoding" rule. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PCP 6.1.0 - Issue with .cue. (LMS 8.0)
i read the discussion here between you fine people with great interest (although i miss some of the points). what i am curious to know is the following: the new flc pcm conversion rule using [flac] for tidal streams does not work with radio paradise. why is this the case? mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702 View this thread: http://forums.slimdevices.com/showthread.php?t=113308 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
the --release option has no functionality in pCP6 (It will in pCP7) Update nightly will install a nightly update found by LMS itself. Update Libs, updates all of the perl libraries and helper binaries (If there is one) piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] ANNOUNCE: piCorePlayer 6.0.0
Very useful to know how to do this. Can you explain how they relate to the UI "Nightly Update" and "Update Libs" buttons? mr-b's Profile: http://forums.slimdevices.com/member.php?userid=10044 View this thread: http://forums.slimdevices.com/showthread.php?t=111787 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Overlay for DAC audiophonics i-sabre ES9023 in PcP 6.0.0?
Hi Paul,
I tried a few times with --user and had the same result.
I did some reading about tinycore and extensions. I ended up using pip
with the --prefix switch and placed the packages in a known spot and
created an extension.
After boot:
Code:
$ pip list
PackageVersion
-- ---
cbor2 5.2.0
Deprecated 1.2.10
luma.core 2.1.0
luma.oled 3.8.1
Pillow 8.0.1
pip20.1.1
pyftdi 0.52.0
pylms 1.0
pyserial 3.5
pyusb 1.1.0
RPi.GPIO 0.7.0
setuptools 49.2.0
smbus2 0.3.0
spidev 3.5
wheel 0.35.1
wrapt 1.12.1
I finally have all the packages loaded for the OLED script. As expected
there are issues:
Code:
$ python3 lms_oled_3.12_spi_audiophonics.py
Traceback (most recent call last):
File "lms_oled_3.12_spi_audiophonics.py", line 46, in
font_title = make_font('msyh.ttf', 26)
File "lms_oled_3.12_spi_audiophonics.py", line 44, in make_font
return ImageFont.truetype(font_path, size)
File "/usr/local/lib/python3.8/site-packages/PIL/ImageFont.py", line 836, in
truetype
return freetype(font)
File "/usr/local/lib/python3.8/site-packages/PIL/ImageFont.py", line 833, in
freetype
return FreeTypeFont(font, size, index, encoding, layout_engine)
File "/usr/local/lib/python3.8/site-packages/PIL/ImageFont.py", line 193, in
__init__
self.font = core.getfont(
OSError: cannot open resource
So what do you use for python debugging in piCore? PyCharm?
Patrick
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread: http://forums.slimdevices.com/showthread.php?t=111835
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
