答复: 答复: 高级网络虚拟路由问题
感谢各位的建议，下一步打算把tools装上，再把配置调高再测一个月 张仕博 基础软件事业部 东软集团股份有限公司 大连市甘井子区黄浦路901号D1座219室 Postcode：116085 Tel:(86 411) 8446 6538 Email：zhang...@neusoft.com -邮件原件- 发件人: linux...@gmail.com [mailto:linux...@gmail.com] 发送时间: 2014年5月14日 10:45 收件人: users-cn@cloudstack.apache.org 主题: Re: 答复: 高级网络虚拟路由问题 建议将虚拟路由器的配置调高 2014-05-13 16:47 GMT+08:00 ma y breeze7...@gmail.com: 是的，cs没有默认安装tools 2014-05-13 14:35 GMT+08:00 张仕博 zhang...@neusoft.com: 看来不稳定的还不仅仅是虚拟路由.. 我的测试环境是CS 4.2 + XenServer 6.2。 发现一个可疑的地方，CS系统虚拟机都没有安装tools，不知道有没有关系。 张仕博 基础软件事业部 东软集团股份有限公司 大连市甘井子区黄浦路901号D1座219室 Postcode：116085 Tel:(86 411) 8446 6538 Email：zhang...@neusoft.com -邮件原件- 发件人: ma y [mailto:breeze7...@gmail.com] 发送时间: 2014年5月13日 14:02 收件人: users-cn@cloudstack.apache.org 主题: Re: 高级网络虚拟路由问题 静态nat不能访问还没有遇到过 我经常遇到的系统虚拟机不工作的是ssvm和cpvm，重启后功能正常 4.3版本的系统虚拟机是64位debian，计算方案也有相应增加，可能是出于稳定性的考虑 2014-05-13 8:54 GMT+08:00 张仕博 zhang...@neusoft.com: 最近在测试高级网络中虚拟路由器的时候发现运行一段时间后，大概半个月，某些静态 NAT不能访问，而另外还有能访问的，解决办法是重启虚拟路由器就好，非常奇怪，请 问这是怎么回事？ _ 张仕博 基础软件事业部 东软集团股份有限公司 大连市甘井子区黄浦路901号D1座219室 Postcode：116085 Tel:(86 Tel:(86 411) 8446 6538 Email： mailto:zhang...@neusoft.com zhang...@neusoft.com --- --- - Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. --- --- - - -- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. - -- -- 白清杰 (Born Bai) 北京开源愿景信息技术有限公司 Mail: linux...@gmail.com --- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. ---
Re: Public networking VR fails to start
On Tue, 2014-05-13 at 09:13 -0400, Dean Kamali wrote: Try and login to system vm and run ssvm-check script located in /usr/local/cloud/ root@s-1-VM:~# /usr/local/cloud/systemvm/ssvm-check.sh First DNS server is 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 48 data bytes 56 bytes from 8.8.8.8: icmp_seq=0 ttl=63 time=0.867 ms 56 bytes from 8.8.8.8: icmp_seq=1 ttl=63 time=0.471 ms --- 8.8.8.8 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.471/0.669/0.867/0.198 ms Good: Can ping DNS server Good: DNS resolves download.cloud.com nfs is currently mounted Mount point is /mnt/SecStorage/f0b86218-6365-36f5-bd82-3848f9c7c574 Good: Can write to mount point Management server is 10.x.x.x. Checking connectivity. Good: Can connect to management server port 8250 Good: Java process is running Tests Complete. Look for ERROR or WARNING above. Have you tried to delete your virtual router and deploy it again? Define delete? If from the UI then yes, more than once. Is there anything in the DB that could do with flushing too? Which hypervisors are you using? KVM.
RE: Windows Server ISO
You will need to make the ISO available for download via http or https, and then from within the UI go to Templates, choose ISO from the drop down, choose to add an ISO and fill in the boxes with the appropriate values. -Original Message- From: Jeff Barnett [mailto:jbarn...@prokarma.com] Sent: Monday, May 12, 2014 5:34 PM To: users@cloudstack.apache.org Subject: Windows Server ISO Could someone guide me through getting a Windows Server ISO into CloudStack?
RE: Intermediate CA
David, excellent example. So all you needed to do was to replace the spaces in the cert with %20, and do nothing for the line breaks? From: david.bie...@appcore.com Subject: Re: Intermediate CA Date: Mon, 12 May 2014 12:18:39 -0500 To: users@cloudstack.apache.org There is still no way to do it in the GUI. That method works well. Or you can do it in cloud monkey like this. http://permalink.gmane.org/gmane.comp.apache.cloudstack.user/11711 On May 7, 2014, at 9:13 PM, Michael Phillips mphilli7...@hotmail.com wrote: All, Is it still necessary to follow this guide http://www.chipchilders.com/blog/2013/1/2/undocumented-feature-using-certificate-chains-in-cloudstack.html to import an SSL cert with an intermediate cert or can it be done direct via the GUI?
Console Proxy still not using HTTPS
Hi, I've install SSL certificate to enable HTTPS for Console Proxy VM, as described on http://docs.cloudstack.apache.org/projects/cloudstack-administration/en/latest/systemvm.html#console-proxy However my Console window still connecting to Console Proxy VM through unencrypted HTTP. The question is, how to force it to use HTTPS? Thanks. -- Vlad
Re: site-to-site vpn
Thanks Dean, I was trying not to use a client's actual range and made a mess of it. The real cidrs don't overlap, they're more like 10.14.0.0/16 and 10.17.0.0/16 The message I get back is that the cidr 10.14.0.0/16,10.17.0.0/16 is not a valid cidr. It appears not to be using the comma to separate. Regards, Paul Angus S: +44 20 3603 0540tel:+44%2020%203603%200540 | M: +447711418784tel:+447711418784 T: @CloudyAngus paul.an...@shapeblue.commailto:paul.an...@shapeblue.com Original message From: Daan Hoogland Date:14/05/2014 07:55 (GMT+00:00) To: users@cloudstack.apache.org Subject: Re: site-to-site vpn Paul, I don't think this is the answer but did you notice that 192.168.1.0/16 and 192.168.2.0/16 are actually the same cidr? You are passing the same address space twice. On Tue, May 13, 2014 at 7:42 PM, Paul Angus paul.an...@shapeblue.comwrote: Hi, I’m trying to create a site-to-site VPN but the CIDR entry: 192.168.1.0/16,192.168.2.0/16 is being returned as invalid. The documentation says that CIDRs should be comma separated, does anyone know why this isn’t working? Just using one or the other works fine. Regards Paul Angus *Senior Consultant / Cloud Architect* [image: cid:image002.png@01CE1071.C6CC9C10] S: +44 20 3603 0540 +442036030540 | M: +4 +44796816158147711418784 | T: @CloudyAngus paul.an...@shapeblue.com | www.shapeblue.comhttp://www.shapeblue.com | Twitter:@shapebluehttps://twitter.com/ ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment framework http://shapeblue.com/csforge/ CloudStack Consulting http://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. -- Daan Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment frameworkhttp://shapeblue.com/csforge/ CloudStack Consultinghttp://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: new installation--ssvm won't start
On May 14, 2014, at 1:17 AM, Ian Young iyo...@ratespecial.com wrote: I'm using 4.3. The Quick Installation Guide for CentOS (which is what I was following) still has the old URL. I forgot to mention changing the URL was another thing I did differently in order to get it working. http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/qig.html Thanks for catching this, I just fixed this. You should feel free to do a drive by contribution to the docs when you find an issue like this. Just click on the 'edit on github' button at the top right of the page, edit it and submit a patch. That would be very welcome, everyone needs to chime in to make the docs better. thanks, -sebastien On Tue, May 13, 2014 at 2:01 AM, sebgoa run...@gmail.com wrote: On May 13, 2014, at 10:02 AM, Geoff Higginbottom geoff.higginbot...@shapeblue.com wrote: Just for the record, the latest install doc does have the correct URLs for the System VM Templates http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html Yep, I just checked the master and the 4.3 version and the url seem correct: http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html#prepare-the-system-vm-template if it' snot let me know or submit a patch Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: dimas yoga pratama [mailto:smid...@gmail.com] Sent: 12 May 2014 17:44 To: users@cloudstack.apache.org Subject: Re: new installation--ssvm won't start Which version of Cloudstack you installd? If you follow the Cloudstack 4.3 installation guide there is a mistake in system template setup section, you should change the old URL with: http://download.cloud.com/templates/4.3/systemvm64template-2014-01-14-master-kvm.qcow2.bz2 hope it works. On Fri, May 9, 2014 at 7:20 AM, Ian Young iyo...@ratespecial.com wrote: I wiped the server clean and started over again today. In the process, I realized that, the previous time, I forgot to uncomment the Domain line in /etc/idmapd.conf. However, even though I included the step this time, the GUI installer still seems to hang on the final Creating system VMs step. I see two VMs running when I run virsh list (the secondary storage VM keeps getting regenerated). In the primary storage, it looks like there is one complete 693 MB image but the other two are only 11 and 12 MB, although they are gradually growing. What's happening here? [root@virthost1 ~]# ls -hl /var/primary/ total 715M -rwxr--r--. 1 nobody nobody 11M May 8 09:55 54de167f-ad9c-453b-91c7-fdd644922932 -rwxr--r--. 1 nobody nobody 12M May 8 09:55 91069b66-b1b3-41aa-8995-874fd4353473 -rwxr--r--. 1 nobody nobody 693M May 8 09:16 c2e6efba-d6c7-11e3-9e76-002590c96d30 The management server log keeps reporting that There is no secondary storage VM for secondary storage host nfs://192.168.100.6/var/secondary . Here is a larger section of logs: http://pastebin.com/NFf5cBx3 On Wed, May 7, 2014 at 10:49 AM, Ian Young iyo...@ratespecial.com wrote: I noticed that in Home Infrastructure Zones Zone1, Resources tab, the Secondary Storage says Allocated 0.00 KB / 0.00 KB. However, the secondary storage NFS mount is listed in Home Infrastructure Secondary Storage and the URL is correct. Does this mean the secondary storage is unreachable? On Wed, May 7, 2014 at 10:26 AM, Ian Young iyo...@ratespecial.com wrote: I reinstalled my single server CloudStack system yesterday, following the quick start guide precisely. The only difference was that I used /var/primary and /var/secondary instead of /primary and /secondary, because the /var partition on this machine is very large. The UI installer reached the point where it says Creating system VMs (this may take a while) but never finished. I left it overnight and it still hadn't completed. This is typically the step that fails, most of the times I've installed CloudStack, so I imagine I must be making the same fundamental mistake each time, and I'd like to know what that is. I checked management.log and it's in a loop where it creates a secondary storage VM, fails to start it, destroys it, and tries again. It says Host 1 is unreachable but I'm using the correct password, SELinux is permissive, and all the iptables rules are in place. In what way is it trying to connect to Host 1? SSH? NFS? Here's a log excerpt of messages related to the SSVM: http://pastebin.com/X11A51bh NFS appears to be functional, since CloudStack automatically mounted the primary storage. FilesystemSize Used Avail Use% Mounted on /dev/sda3 20G 1.8G 17G 10% / tmpfs 32G 0 32G 0% /dev/shm /dev/sda1 194M 42M 143M 23% /boot
Incorrect Instance State
Hi All, A number of my instances are incorrectly reporting state Stopped and are actually running. The user has told me that he did not initiate a stop of the instances, and is happy they are running, although now the reported state is wrong and misleading. Anyone have any ideas why this would happen, and how I can update the state to properly reflect the fact that these instances are running? Many Thanks, Jason === The Leonteq Mail Gateway made the following annotation === This e-mail is confidential. If you are not the intended recipient, you should not copy it, re-transmit it, use it or disclose its contents, but should return it to the sender immediately and delete the copy from your system. Leonteq Securities is not responsible for, nor endorses, any opinion, recommendation, conclusion, solicitation, offer or agreement or any information contained in this communication. Leonteq Securities cannot accept any responsibility for the accuracy or completeness of this message as it has been transmitted over a public network. If you suspect that the message may have been intercepted or amended, please call the sender. Should you require any further information, please contact the Compliance Manager on complia...@leonteq.commailto:complia...@leonteq.com. ==
RE: Can I copy one VM template from zone A to another zone B ?
What is the failure? -Original Message- From: Syed Ghayur [mailto:syed.gha...@bigswitch.com] Sent: Tuesday, May 13, 2014 8:44 AM To: users@cloudstack.apache.org Subject: Fwd: Can I copy one VM template from zone A to another zone B ? I tried but copying template failed (version 4.2) Any help in this regard ? Thanks, Syed
RE: site-to-site vpn
Thanks Pierre, I was trying not to use a client's actual range and made a mess of it. The real cidrs don't overlap, they're more like 10.14.0.0/16 and 10.17.0.0/16 The message I get back is that the cidr 10.14.0.0/16,10.17.0.0/16 is not a valid cidr. It appears not to be using the comma to separate. Regards Paul Angus Cloud Architect S: +44 20 3603 0540 | M: +447711418784 | T: CloudyAngus paul.an...@shapeblue.com -Original Message- From: Pierre-Luc Dion [mailto:pd...@cloudops.com] Sent: 14 May 2014 12:27 To: users@cloudstack.apache.org Subject: Re: site-to-site vpn Hi Paul, 192.168.1.0/16 and 192.168.2.0/16 are not valid CIDR. 192.168.1.0/24 and 192.168.2.0/24 will work Le mardi 13 mai 2014, Paul Angus paul.an...@shapeblue.com a écrit : Hi, I’m trying to create a site-to-site VPN but the CIDR entry: 192.168.1.0/16,192.168.2.0/16 is being returned as invalid. The documentation says that CIDRs should be comma separated, does anyone know why this isn’t working? Just using one or the other works fine. Regards Paul Angus *Senior Consultant / Cloud Architect* [image: cid:image002.png@01CE1071.C6CC9C10] S: +44 20 3603 0540 +442036030540 | M: +4 +44796816158147711418784 | T: @CloudyAngus paul.an...@shapeblue.comjavascript:_e(%7B%7D,'cvml','paul.angus@shape blue.com');| www.shapeblue.com | Twitter:@shapeblue https://twitter.com/ ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment framework http://shapeblue.com/csforge/ CloudStack Consulting http://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. -- Pierre-Luc Dion Architecte de Solution Cloud | Cloud Solutions Architect 855-OK-CLOUD (855-652-5683) x1101 - - - *CloudOps*420 rue Guy Montréal QC H3J 1S6 www.cloudops.com @CloudOps_ Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment frameworkhttp://shapeblue.com/csforge/ CloudStack Consultinghttp://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
RE: Incorrect Instance State
Hi Jason, You would need to look at logs to work out how this happened, but to fix it you would simply need to find the affected instances in the cloud.vm_instance table in the DB, and then change the state from 'Stopped' to 'Running' Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: STEENBLIK Jason [mailto:jason.steenb...@leonteq.com] Sent: 14 May 2014 11:34 To: users@cloudstack.apache.org Subject: Incorrect Instance State Hi All, A number of my instances are incorrectly reporting state Stopped and are actually running. The user has told me that he did not initiate a stop of the instances, and is happy they are running, although now the reported state is wrong and misleading. Anyone have any ideas why this would happen, and how I can update the state to properly reflect the fact that these instances are running? Many Thanks, Jason === The Leonteq Mail Gateway made the following annotation === This e-mail is confidential. If you are not the intended recipient, you should not copy it, re-transmit it, use it or disclose its contents, but should return it to the sender immediately and delete the copy from your system. Leonteq Securities is not responsible for, nor endorses, any opinion, recommendation, conclusion, solicitation, offer or agreement or any information contained in this communication. Leonteq Securities cannot accept any responsibility for the accuracy or completeness of this message as it has been transmitted over a public network. If you suspect that the message may have been intercepted or amended, please call the sender. Should you require any further information, please contact the Compliance Manager on complia...@leonteq.commailto:complia...@leonteq.com. == Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment frameworkhttp://shapeblue.com/csforge/ CloudStack Consultinghttp://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: site-to-site vpn
Hi Paul, 192.168.1.0/16 and 192.168.2.0/16 are not valid CIDR. 192.168.1.0/24 and 192.168.2.0/24 will work Le mardi 13 mai 2014, Paul Angus paul.an...@shapeblue.com a écrit : Hi, I’m trying to create a site-to-site VPN but the CIDR entry: 192.168.1.0/16,192.168.2.0/16 is being returned as invalid. The documentation says that CIDRs should be comma separated, does anyone know why this isn’t working? Just using one or the other works fine. Regards Paul Angus *Senior Consultant / Cloud Architect* [image: cid:image002.png@01CE1071.C6CC9C10] S: +44 20 3603 0540 +442036030540 | M: +4 +44796816158147711418784 | T: @CloudyAngus paul.an...@shapeblue.comjavascript:_e(%7B%7D,'cvml','paul.an...@shapeblue.com');| www.shapeblue.com | Twitter:@shapeblue https://twitter.com/ ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge – rapid IaaS deployment framework http://shapeblue.com/csforge/ CloudStack Consulting http://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. -- Pierre-Luc Dion Architecte de Solution Cloud | Cloud Solutions Architect 855-OK-CLOUD (855-652-5683) x1101 - - - *CloudOps*420 rue Guy Montréal QC H3J 1S6 www.cloudops.com @CloudOps_
Re: new installation--ssvm won't start
The master installation guide has the versions wrong for package repository. Look for 4.2 and you see it for DEB and RHEL. I think both need to be changed to 4.3. From: Ian Young iyo...@ratespecial.com To: users@cloudstack.apache.org Sent: Tuesday, May 13, 2014 7:17 PM Subject: Re: new installation--ssvm won't start I'm using 4.3. The Quick Installation Guide for CentOS (which is what I was following) still has the old URL. I forgot to mention changing the URL was another thing I did differently in order to get it working. http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/qig.html On Tue, May 13, 2014 at 2:01 AM, sebgoa run...@gmail.com wrote: On May 13, 2014, at 10:02 AM, Geoff Higginbottom geoff.higginbot...@shapeblue.com wrote: Just for the record, the latest install doc does have the correct URLs for the System VM Templates http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html Yep, I just checked the master and the 4.3 version and the url seem correct: http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html#prepare-the-system-vm-template if it' snot let me know or submit a patch Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: dimas yoga pratama [mailto:smid...@gmail.com] Sent: 12 May 2014 17:44 To: users@cloudstack.apache.org Subject: Re: new installation--ssvm won't start Which version of Cloudstack you installd? If you follow the Cloudstack 4.3 installation guide there is a mistake in system template setup section, you should change the old URL with: http://download.cloud.com/templates/4.3/systemvm64template-2014-01-14-master-kvm.qcow2.bz2 hope it works. On Fri, May 9, 2014 at 7:20 AM, Ian Young iyo...@ratespecial.com wrote: I wiped the server clean and started over again today. In the process, I realized that, the previous time, I forgot to uncomment the Domain line in /etc/idmapd.conf. However, even though I included the step this time, the GUI installer still seems to hang on the final Creating system VMs step. I see two VMs running when I run virsh list (the secondary storage VM keeps getting regenerated). In the primary storage, it looks like there is one complete 693 MB image but the other two are only 11 and 12 MB, although they are gradually growing. What's happening here? [root@virthost1 ~]# ls -hl /var/primary/ total 715M -rwxr--r--. 1 nobody nobody 11M May 8 09:55 54de167f-ad9c-453b-91c7-fdd644922932 -rwxr--r--. 1 nobody nobody 12M May 8 09:55 91069b66-b1b3-41aa-8995-874fd4353473 -rwxr--r--. 1 nobody nobody 693M May 8 09:16 c2e6efba-d6c7-11e3-9e76-002590c96d30 The management server log keeps reporting that There is no secondary storage VM for secondary storage host nfs://192.168.100.6/var/secondary . Here is a larger section of logs: http://pastebin.com/NFf5cBx3 On Wed, May 7, 2014 at 10:49 AM, Ian Young iyo...@ratespecial.com wrote: I noticed that in Home Infrastructure Zones Zone1, Resources tab, the Secondary Storage says Allocated 0.00 KB / 0.00 KB. However, the secondary storage NFS mount is listed in Home Infrastructure Secondary Storage and the URL is correct. Does this mean the secondary storage is unreachable? On Wed, May 7, 2014 at 10:26 AM, Ian Young iyo...@ratespecial.com wrote: I reinstalled my single server CloudStack system yesterday, following the quick start guide precisely. The only difference was that I used /var/primary and /var/secondary instead of /primary and /secondary, because the /var partition on this machine is very large. The UI installer reached the point where it says Creating system VMs (this may take a while) but never finished. I left it overnight and it still hadn't completed. This is typically the step that fails, most of the times I've installed CloudStack, so I imagine I must be making the same fundamental mistake each time, and I'd like to know what that is. I checked management.log and it's in a loop where it creates a secondary storage VM, fails to start it, destroys it, and tries again. It says Host 1 is unreachable but I'm using the correct password, SELinux is permissive, and all the iptables rules are in place. In what way is it trying to connect to Host 1? SSH? NFS? Here's a log excerpt of messages related to the SSVM: http://pastebin.com/X11A51bh NFS appears to be functional, since CloudStack automatically mounted the primary storage. Filesystem Size Used Avail Use% Mounted on /dev/sda3 20G 1.8G 17G 10% / tmpfs 32G 0 32G 0% /dev/shm /dev/sda1 194M 42M 143M 23% /boot
Re: Console Proxy still not using HTTPS
This link might explain you how is working https://cwiki.apache.org/confluence/display/CLOUDSTACK/Realhost+IP+changes On Wed, May 14, 2014 at 10:45 AM, Gopala Krishnan gopkris2...@gmail.com wrote: Hi, Check your SSL certificate intermediate CA setting. It should be need to enable manually in your cloud database and keystore table. 1 for root cert 2 for intermediate CA 3 for certificate On Wed, May 14, 2014 at 5:10 AM, Владислав Старков vladislav.star...@gmail.com wrote: Hi, I've install SSL certificate to enable HTTPS for Console Proxy VM, as described on http://docs.cloudstack.apache.org/projects/cloudstack-administration/en/latest/systemvm.html#console-proxy However my Console window still connecting to Console Proxy VM through unencrypted HTTP. The question is, how to force it to use HTTPS? Thanks. -- Vlad -- Gopala Krishnan.S Mobile : +91 9865709094 / +91 9994874447 *cPanel KnowledgeBase http://www.cpanelkb.net/* *Linux Server Admin Tools* http://www.gnutoolbox.com -- Centralway Factory AG | Konstantinos Karampogias, DevOps | LinkedIn | + 41 44 578 40 00
RE: Console Proxy still not using HTTPS
Can you check Global setting consoleproxy.url.domain value , HTTP will be used if this field is blank . Thanks Prashant -Original Message- From: Владислав Старков [mailto:vladislav.star...@gmail.com] Sent: Wednesday, May 14, 2014 5:10 AM To: users@cloudstack.apache.org Subject: Console Proxy still not using HTTPS Hi, I've install SSL certificate to enable HTTPS for Console Proxy VM, as described on http://docs.cloudstack.apache.org/projects/cloudstack-administration/en/latest/systemvm.html#console-proxy However my Console window still connecting to Console Proxy VM through unencrypted HTTP. The question is, how to force it to use HTTPS? Thanks. -- Vlad
LXC Tips and Tricks
All, I am reaching out to the community to see if anyone has any experience using LXC with CloudStack. I'm doing some RD in preparation for a potential Production Deployment in a Zone which will use either KVM or XenServer to run the System VMs, and also LXC. There appears to be very little documentation around LXC so I was hoping to consolidate experiences and any best practices people have developed etc. and eventually adding some content to the Docs or Wiki (or both) Regards Geoff Higginbottom CTO / Cloud Architect [Description: Mail Logo Bottom Align] D: +44 20 3603 0542tel:+442036030542 | S: +44 20 3603 0540tel:+442036030540 | M: +447968161581tel:+447968161581 geoff.higginbot...@shapeblue.commailto:geoff.higginbot...@shapeblue.com | www.shapeblue.comhtp://www.shapeblue.com/ | Twitter:@cloudstackguruhttps://twitter.com/#!/cloudstacguru ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Buildhttp://shapeblue.com/iaas-cloud-design-and-build// CSForge - rapid IaaS deployment frameworkhttp://shapeblue.com/csforge/ CloudStack Consultinghttp://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Supporthttp://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courseshttp://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark.
Re: new installation--ssvm won't start
I'm using 4.3. The Quick Installation Guide for CentOS (which is what I was following) still has the old URL. I forgot to mention changing the URL was another thing I did differently in order to get it working. http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/qig.html On Tue, May 13, 2014 at 2:01 AM, sebgoa run...@gmail.com wrote: On May 13, 2014, at 10:02 AM, Geoff Higginbottom geoff.higginbot...@shapeblue.com wrote: Just for the record, the latest install doc does have the correct URLs for the System VM Templates http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html Yep, I just checked the master and the 4.3 version and the url seem correct: http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/master/installation.html#prepare-the-system-vm-template if it' snot let me know or submit a patch Regards Geoff Higginbottom D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581 geoff.higginbot...@shapeblue.com -Original Message- From: dimas yoga pratama [mailto:smid...@gmail.com] Sent: 12 May 2014 17:44 To: users@cloudstack.apache.org Subject: Re: new installation--ssvm won't start Which version of Cloudstack you installd? If you follow the Cloudstack 4.3 installation guide there is a mistake in system template setup section, you should change the old URL with: http://download.cloud.com/templates/4.3/systemvm64template-2014-01-14-master-kvm.qcow2.bz2 hope it works. On Fri, May 9, 2014 at 7:20 AM, Ian Young iyo...@ratespecial.com wrote: I wiped the server clean and started over again today. In the process, I realized that, the previous time, I forgot to uncomment the Domain line in /etc/idmapd.conf. However, even though I included the step this time, the GUI installer still seems to hang on the final Creating system VMs step. I see two VMs running when I run virsh list (the secondary storage VM keeps getting regenerated). In the primary storage, it looks like there is one complete 693 MB image but the other two are only 11 and 12 MB, although they are gradually growing. What's happening here? [root@virthost1 ~]# ls -hl /var/primary/ total 715M -rwxr--r--. 1 nobody nobody 11M May 8 09:55 54de167f-ad9c-453b-91c7-fdd644922932 -rwxr--r--. 1 nobody nobody 12M May 8 09:55 91069b66-b1b3-41aa-8995-874fd4353473 -rwxr--r--. 1 nobody nobody 693M May 8 09:16 c2e6efba-d6c7-11e3-9e76-002590c96d30 The management server log keeps reporting that There is no secondary storage VM for secondary storage host nfs://192.168.100.6/var/secondary . Here is a larger section of logs: http://pastebin.com/NFf5cBx3 On Wed, May 7, 2014 at 10:49 AM, Ian Young iyo...@ratespecial.com wrote: I noticed that in Home Infrastructure Zones Zone1, Resources tab, the Secondary Storage says Allocated 0.00 KB / 0.00 KB. However, the secondary storage NFS mount is listed in Home Infrastructure Secondary Storage and the URL is correct. Does this mean the secondary storage is unreachable? On Wed, May 7, 2014 at 10:26 AM, Ian Young iyo...@ratespecial.com wrote: I reinstalled my single server CloudStack system yesterday, following the quick start guide precisely. The only difference was that I used /var/primary and /var/secondary instead of /primary and /secondary, because the /var partition on this machine is very large. The UI installer reached the point where it says Creating system VMs (this may take a while) but never finished. I left it overnight and it still hadn't completed. This is typically the step that fails, most of the times I've installed CloudStack, so I imagine I must be making the same fundamental mistake each time, and I'd like to know what that is. I checked management.log and it's in a loop where it creates a secondary storage VM, fails to start it, destroys it, and tries again. It says Host 1 is unreachable but I'm using the correct password, SELinux is permissive, and all the iptables rules are in place. In what way is it trying to connect to Host 1? SSH? NFS? Here's a log excerpt of messages related to the SSVM: http://pastebin.com/X11A51bh NFS appears to be functional, since CloudStack automatically mounted the primary storage. FilesystemSize Used Avail Use% Mounted on /dev/sda3 20G 1.8G 17G 10% / tmpfs 32G 0 32G 0% /dev/shm /dev/sda1 194M 42M 143M 23% /boot /dev/sda4 1.8T 1.9G 1.7T 1% /var 192.168.100.6:/var/primary 1.8T 1.9G 1.7T 1% /mnt/0594caa2-ceb4-36c6-9b13-0ff149a130af How can I identify whatever it is that's preventing the SSVM from starting? Here is another log excerpt, without any filtering: http://pastebin.com/XsPGJQik Find out more
Increase capacity
Dear, users. I wanna to increase system capacity, specifically cpu. I'm using CS 4.2.0 with vmware 5.1, when zone was created parameter cpu.overprovisioning.factor is equal to 1. I tried to change it, but to no success. Also tried to change the value in the table host, but also without success, after restarting cloudstack-management returns the old value. Maybe someone faced with this situation? Thanks! -- Alex.
Unable to remove Zone's public IP range
Hello, CloudStack 4.3 Home - Infrastructure - Zones - Zone-1 - Public and Guest Network - Public When I try to remove IP range, the pop-up window appears Status: 1 Ips are in use. Cannot delete this vlan. This is strange, as I disabled zone and stopped all guest instances, system VMs and virtual router there. What I'm doing wrong? -- Vlad
RE: Presentation videos from CloudStack Collab Conference #CCCNA14
Hi Kirk, Your video has been published: https://www.youtube.com/watch?v=EVLrSFkcpC0index=48list=PLU2OcwpQkYCyPx_cwJxyOK0YKSM86Mj9n All, Here's an update from The Linux Foundation on the remaining videos to be uploaded: The following videos are still in line to get uploaded: . Kirk Kosinski Troubleshooting Apache CloudStack Environments . Sebastien Goasguen CloudStack Clients and Tools . Animesh Chaturvedi - Managing Apache CloudStack Releases . Michael Ducy - Chef - Automation for the Cloud Part 1 . Ian Colle's session . CloudStack Mini Bootcamp I will upload them in the order I listed above. They are each taking 2-3 hours on my end so we should have all videos uploaded and on the CloudStack Collaboration Conference playlist by tomorrow late afternoon. Thanks, Karen -Original Message- From: Kirk Jantzer [mailto:kirk.jant...@gmail.com] Sent: Tuesday, May 06, 2014 10:19 AM To: Cloudstack users mailing list; fgaudrea...@cloudops.com Cc: Amogh Vasekar; market...@cloudstack.apache.org Subject: Re: Presentation videos from CloudStack Collab Conference #CCCNA14 Just wondering if there is an update to this, mine is still missing. Regards, Kirk Jantzer http://about.me/kirkjantzer On Thu, May 1, 2014 at 5:05 PM, Kirk Jantzer kirk.jant...@gmail.com wrote: Mine is missing :-( Regards, Kirk Jantzer http://about.me/kirkjantzer On Thu, May 1, 2014 at 4:06 PM, Francois Gaudreault fgaudrea...@cloudops.com wrote: Well at least one of the presentation we made is missing. FG On 2014-05-01, 5:48 PM, Amogh Vasekar wrote: Hi, Are some of the videos missing? Amogh On 5/1/14 2:39 PM, Karen Vuong karen.vu...@citrix.com wrote: Hi Adrian, The Linux Foundation is uploading the full video and correcting the typo. It will be up in a few days. Thanks, Karen -Original Message- From: Adrian Lewis [mailto:adr...@alsiconsulting.co.uk] Sent: Thursday, May 01, 2014 3:05 AM To: users@cloudstack.apache.org; fgaudrea...@cloudops.com; market...@cloudstack.apache.org Subject: RE: Presentation videos from CloudStack Collab Conference #CCCNA14 And Integration of Citrex XenDesktop and XenApp with CloudStack - Paul Howard is cut short to about 4 minutes. Is this the right place to report things like this? Would also be nice to correct the typo if it's being uploaded again. Adrian -Original Message- From: Francois Gaudreault [mailto:fgaudrea...@cloudops.com] Sent: 01 May 2014 02:20 To: users@cloudstack.apache.org; market...@cloudstack.apache.org Subject: Re: Presentation videos from CloudStack Collab Conference #CCCNA14 Looks like some are still missing? Francois On 2014-04-30, 5:03 PM, Tariq Iqbal wrote: Hi, The presentation videos from the CloudStack Collaboration Conference North America 2014 held in Denver earlier this month are now available: https://www.youtube.com/playlist?list=PLU2OcwpQkYCyPx_cwJxyOK0YKSM 86Mj 9napp=desktop Best Regards, Tariq Iqbal *Senior Consultant* ** Description: Mail Logo Bottom Align** ** S: +44 20 3603 0540 tel:+442036030540 | M: +447909911600 tel:+447909911600 tariq.iq...@shapeblue.com mailto:tariq.iq...@shapeblue.com | www.shapeblue.com http://www.shapeblue.com/ | Twitter:@shapeBlue https://twitter.com/#%21/shapeblue | Twitter:@TariqIqbal_ https://twitter.com/tariqiqbal_ ShapeBlue Ltd, 53 Chandos Place, Covent Garden, London, WC2N 4HS Find out more about ShapeBlue and our range of CloudStack related services IaaS Cloud Design Build http://shapeblue.com/iaas-cloud-design-and-build// CSForge rapid IaaS deployment framework http://shapeblue.com/csforge/ CloudStack Consulting http://shapeblue.com/cloudstack-consultancy/ CloudStack Infrastructure Support http://shapeblue.com/cloudstack-infrastructure-support/ CloudStack Bootcamp Training Courses http://shapeblue.com/cloudstack-training/ This email and any attachments to it may be confidential and are intended solely for the use of the individual to whom it is addressed. Any views or opinions expressed are solely those of the author and do not necessarily represent those of Shape Blue Ltd or related companies. If you are not the intended recipient of this email, you must neither take any action based upon its contents, nor copy or show it to anyone. Please contact the sender if you believe you have received this email in error. Shape Blue Ltd is a company incorporated in England Wales. ShapeBlue Services India LLP is a company incorporated in India and is operated under license from Shape Blue Ltd. Shape Blue Brasil Consultoria Ltda is a company incorporated in Brasil and is operated under license from Shape Blue Ltd. ShapeBlue is a registered trademark. -- Francois Gaudreault Gestionnaire de Produit | Product Manager - Cloud Platform Services fgaudrea...@cloudops.com 514-629-6775 - - - CloudOps 420 rue Guy Montréal QC
Re: Public networking VR fails to start
If you are able to delete the VR from UI, there is no need to do any clean up in the DB, ssvm checks seems fine, I would like you to review your networking settings, things like VLAN IDs, IP start / end range, also subnet mask for your network offering. System VMs gets a public IP, can you ping that IP from your local network? Dean On Tue, May 13, 2014 at 12:35 PM, Jonathan Gowar j...@whiteheat.org.ukwrote: On Tue, 2014-05-13 at 09:13 -0400, Dean Kamali wrote: Try and login to system vm and run ssvm-check script located in /usr/local/cloud/ root@s-1-VM:~# /usr/local/cloud/systemvm/ssvm-check.sh First DNS server is 8.8.8.8 PING 8.8.8.8 (8.8.8.8): 48 data bytes 56 bytes from 8.8.8.8: icmp_seq=0 ttl=63 time=0.867 ms 56 bytes from 8.8.8.8: icmp_seq=1 ttl=63 time=0.471 ms --- 8.8.8.8 ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.471/0.669/0.867/0.198 ms Good: Can ping DNS server Good: DNS resolves download.cloud.com nfs is currently mounted Mount point is /mnt/SecStorage/f0b86218-6365-36f5-bd82-3848f9c7c574 Good: Can write to mount point Management server is 10.x.x.x. Checking connectivity. Good: Can connect to management server port 8250 Good: Java process is running Tests Complete. Look for ERROR or WARNING above. Have you tried to delete your virtual router and deploy it again? Define delete? If from the UI then yes, more than once. Is there anything in the DB that could do with flushing too? Which hypervisors are you using? KVM.
Re: Increase capacity
Its broken in 4.2, it trys to adjust the number of currently running VMs somehow... so for me it would say 100% CPU used changing overpovisioning to 4 would simply change my system to show 400% CPU used Destroy all vms and recreate them after changing the overpovisioning on the cluster level. Or mess about with the sql tables... i gave up on messing about with mysql since my infrastructure is very dynamic and easy to re-create. On Wed, May 14, 2014 at 10:31 AM, Alexey Samarin nrg3...@gmail.com wrote: Dear, users. I wanna to increase system capacity, specifically cpu. I'm using CS 4.2.0 with vmware 5.1, when zone was created parameter cpu.overprovisioning.factor is equal to 1. I tried to change it, but to no success. Also tried to change the value in the table host, but also without success, after restarting cloudstack-management returns the old value. Maybe someone faced with this situation? Thanks! -- Alex. -- Tim Ehlers
Re: using cldstk-dploy with proxy
It should work as long as yum is configured to work using the proxy but this has not been tested. I be interested in your feedback if you test it. The cldstk-deploy tool is for the most automating the installation using ansible. There is also what I call a local installation type which creates a webserver/repo using nodejs but that's only for the cloudstack packages and systemtemplate to speed up multi system installs. You still need the Internet though for yum to install other packages and dependancies. On May 6, 2014 5:30 PM, Ian Duffy i...@ianduffy.ie wrote: I don't know the script in detail just briefly glanced over it. It looks like it should work if you 1) Set the proxy for yum. Modify /etc/yum.conf add in proxy=http://whatever:port 2) Modify /etc/bashrc and do exports for http_proxy and https_proxy 3) Modify /etc/wgetrc and do http_proxy=http://whatever:port and use_proxy = on On 6 May 2014 13:45, dimas yoga pratama smid...@gmail.com wrote: Hi all, is it possible to use cldstk-dply https://github.com/thehyperadvisor/cldstk-deploy with proxy environment and a single host? I want to test it in my college lab.thanks
Re: Console Proxy still not using HTTPS
After I added domain name to Global setting key consoleproxy.url.domain, it seems the JavaScript program in pop-up window now started sending request to HTTPS and proper domain name is used. However there is a drawback, the console proxy not working anymore. Is it possible, that something wrong with SSL certificate that I've uploaded to CloudStack (I suspect that the issue can be in certificate's passphrase)? Thanks On Wed, May 14, 2014 at 11:20 AM, Prashant Kumar Mishra prashantkumar.mis...@citrix.com wrote: Can you check Global setting consoleproxy.url.domain value , HTTP will be used if this field is blank . Thanks Prashant -Original Message- From: Владислав Старков [mailto:vladislav.star...@gmail.com] Sent: Wednesday, May 14, 2014 5:10 AM To: users@cloudstack.apache.org Subject: Console Proxy still not using HTTPS Hi, I've install SSL certificate to enable HTTPS for Console Proxy VM, as described on http://docs.cloudstack.apache.org/projects/cloudstack-administration/en/latest/systemvm.html#console-proxy However my Console window still connecting to Console Proxy VM through unencrypted HTTP. The question is, how to force it to use HTTPS? Thanks. -- Vlad
Importing Intermediate CA
All, Is it still necessary to follow this guide http://www.chipchilders.com/blog/2013/1/2/undocumented-feature-using-certificate-chains-in-cloudstack.html if you are importing an intermediate CA? Or can you just use the GUI?
CloudStack 4.2 Unable to add host
Hello! I reference the Link: http://www.vpsee.com/2013/11/install-cloudstack-4-2-on-centos-6-4/ Try to Use VMware to Install CentOS 6.5 set up a CloudStack Environment. The Control Node install cloudstack-management( IP:192.168.253.136) The Compute Node install cloudstack-agent kvm. (IP:192.168.253.138) I have a clean installation of Cloudstack in my local laboratory, I have configured: Zone, Pod Cluster http://i.imgur.com/0o32L3D.png Web UI Add Host Error: Something went wrong; you may go back and correct any errors: Unable to add the host How can I solve the problem? Troubleshooting the error. [root@cloudstack ~]# cd /var/log/cloudstack/management/ [root@cloudstack management]# tail catalina.out INFO [network.vpc.VpcManagerImpl] (VpcChecker-1:) Found 0 removed VPCs to cleanup WARN [apache.cloudstack.alerts] (HA-1:) alertType:: 13 // dataCenterId:: 0 // podId:: 0 // clusterId:: null // message:: No usage server process running INFO [cloud.ha.HighAvailabilityManagerImpl] (HA-2:) checking health of usage server WARN [apache.cloudstack.alerts] (HA-2:) alertType:: 13 // dataCenterId:: 0 // podId:: 0 // clusterId:: null // message:: No usage server process running INFO [cloud.ha.HighAvailabilityManagerImpl] (HA-3:) checking health of usage server WARN [apache.cloudstack.alerts] (HA-3:) alertType:: 13 // dataCenterId:: 0 // podId:: 0 // clusterId:: null // message:: No usage server process running INFO [cloud.ha.HighAvailabilityManagerImpl] (HA-2:) checking health of usage server WARN [apache.cloudstack.alerts] (HA-2:) alertType:: 13 // dataCenterId:: 0 // podId:: 0 // clusterId:: null // message:: No usage server process running INFO [cloud.ha.HighAvailabilityManagerImpl] (HA-1:) checking health of usage server WARN [apache.cloudstack.alerts] (HA-1:) alertType:: 13 // dataCenterId:: 0 // podId:: 0 // clusterId:: null // message:: No usage server process running [root@cloudstack management]# tail management-server.log 2014-05-06 05:10:55,560 DEBUG [host.dao.HostDaoImpl] (ClusteredAgentManager Timer:null) Completed acquiring hosts for clusters not owned by any management server 2014-05-06 05:11:18,242 DEBUG [cloud.consoleproxy.ConsoleProxyManagerImpl] (consoleproxy-1:null) Skip capacity scan due to there is no Primary Storage UPintenance mode 2014-05-06 05:11:20,420 DEBUG [network.router.VirtualNetworkApplianceManagerImpl] (RouterStatusMonitor-1:null) Found 0 routers to update status. 2014-05-06 05:11:20,422 DEBUG [network.router.VirtualNetworkApplianceManagerImpl] (RouterStatusMonitor-1:null) Found 0 networks to update RvR status. 2014-05-06 05:11:35,911 DEBUG [cloud.server.StatsCollector] (StatsCollector-3:null) VmStatsCollector is running... 2014-05-06 05:11:35,911 DEBUG [cloud.server.StatsCollector] (StatsCollector-2:null) HostStatsCollector is running... 2014-05-06 05:11:35,962 DEBUG [cloud.server.StatsCollector] (StatsCollector-1:null) StorageCollector is running... 2014-05-06 05:11:48,245 DEBUG [cloud.consoleproxy.ConsoleProxyManagerImpl] (consoleproxy-1:null) Skip capacity scan due to there is no Primary Storage UPintenance mode 2014-05-06 05:11:50,420 DEBUG [network.router.VirtualNetworkApplianceManagerImpl] (RouterStatusMonitor-1:null) Found 0 routers to update status. 2014-05-06 05:11:50,422 DEBUG [network.router.VirtualNetworkApplianceManagerImpl] (RouterStatusMonitor-1:null) Found 0 networks to update RvR status. [root@cloudstack management]#
Re: Unable to remove Zone's public IP range
Hi, try to reload CS service and hypervizor. Why do you want to delete this? If you wanna recreate zone i suggest delete db and redeploy cs database. Also i know that there some problem with DB data, you delete something in CS interface but record still remaining in some table. Look at log file On Wed, May 14, 2014 at 4:55 PM, Владислав Старков vladislav.star...@gmail.com wrote: Hello, CloudStack 4.3 Home - Infrastructure - Zones - Zone-1 - Public and Guest Network - Public When I try to remove IP range, the pop-up window appears Status: 1 Ips are in use. Cannot delete this vlan. This is strange, as I disabled zone and stopped all guest instances, system VMs and virtual router there. What I'm doing wrong? -- Vlad
