Re: [libreoffice-users] Printing in Impress and file dialogue choice
Mike Scott wrote: On 09/10/15 20:24, libreoffice-ml.mbou...@spamgourmet.com wrote: Mike Scott wrote: On 09/10/15 12:43, Malcolm Moore wrote: ... This is outstandingly horrible ! Yes. My summary for anyone in the same boat suffering from brain failure at the end of the week: . It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. Not correct AFAICS. Unfortunately, changing print properties doesn't seem to mark the file as needs-to-be-saved, so ^S does nothing (and File|Save is greyed out). That depends on the settings: - Tools > Options > LibreOffice > General > Printing sets "document modified" status and: - Tools > Options > LibreOffice > General > Allow to save document even when the document is not modified Tools > Options > Load/Save > General > Load printer settings with the document probably also affects whether previously saved printer settings are actually used next time the document is opened. Hmmm. I think the problem here is one of obscurity. Too many options spread over too many dialogues/tabs all affecting results, no obvious way to find what's happening unless you "just know" to look there, and the help file isn't very helpful. There's even inconsistency between programs. Try the following in each of Writer and Impress. Create a new document and save it. Change the printer via File|Print setting. Now look at menu choice File|Save. In Impress, it's greyed out. In Writer, it's available. (Both options you mention above are unset in my system, btw.) Now you mention it, I see that too in LibreOffice 4.4.2 on Windows. With both unset: - Tools > Options > LibreOffice > General > Printing sets "document modified" status - Tools > Options > LibreOffice > General > Allow to save document even when the document is not modified Changing printer: - Create new document (for Base, also create a database form) - Save - Change the printer at File > Printer Settings - In Writer or Base (at least in form editor), the document is treated as modified (Save is available, and attempting to close give a warning that it's not saved) - In Calc, Impress, Draw and Formula, the document is NOT treated as modified. Changing printer-specific properties: - Create new document (for Base, also create a database form) - Save - Change printer-specific settings at File > Printer Settings > Properties (I've tried with an Epson SX100 changing the Quality and Reverse Order settings) - In Writer or Base (at least in form editor), the document is treated as modified - In Calc, Impress, Draw and Formula, the document is NOT treated as modified. - Save - Again, change printer-specific settings at File > Printer Settings > Properties - This time, the document is NOT treated as modified, even in Writer and Base forms; it is only the first time that treats the document as modified. Changing LibreOffice printer options: - Create new document (for Base, also create a database form) - Save - Change all the tick-box options at File > Printer Settings > Options - In all components, the document is NOT treated as modified. It's probably not worth me reporting this against 4.4.2, but if you can reproduce with the latest version it would probably be worth submitting a bug report against Writer (it also affects Base forms, but I think that just uses Writer so probably really the same problem). If you submit a bug, please post back with the bug number. Mark. -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress and file dialogue choice
Under my version of LO 5.0.2.2 (under Linux Mint 17.2 32 bit) I still have the choice between LO's dialogues and the system dialogues. Graham On 10 October 2015 at 09:59, Mike Scott wrote: > On 09/10/15 20:24, libreoffice-ml.mbou...@spamgourmet.com wrote: > >> Mike Scott wrote: >> >>> On 09/10/15 12:43, Malcolm Moore wrote: >>> ... >>> This is outstandingly horrible ! >>> >>> Yes. >>> >>> My summary for anyone in the same boat suffering from brain failure at the end of the week: >>> . >>> >>> It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. >>> >>> Not correct AFAICS. Unfortunately, changing print properties doesn't >>> seem to mark the file as needs-to-be-saved, so ^S does nothing (and >>> File|Save is greyed out). >>> >> >> That depends on the settings: >> - Tools > Options > LibreOffice > General > Printing sets "document >> modified" status >> and: >> - Tools > Options > LibreOffice > General > Allow to save document even >> when the document is not modified >> >> Tools > Options > Load/Save > General > Load printer settings with the >> document probably also affects whether previously saved printer settings >> are actually used next time the document is opened. >> >> Mark. >> >> >> > Hmmm. > > I think the problem here is one of obscurity. Too many options spread over > too many dialogues/tabs all affecting results, no obvious way to find > what's happening unless you "just know" to look there, and the help file > isn't very helpful. > > There's even inconsistency between programs. Try the following in each of > Writer and Impress. Create a new document and save it. Change the printer > via File|Print setting. Now look at menu choice File|Save. In Impress, it's > greyed out. In Writer, it's available. > > (Both options you mention above are unset in my system, btw.) > > > To add more annoyance, as part of trying to get my own brochure issue > sorted, I upgraded to 5.0.2.2. A minor upgrade, yet it's changed the file > load/save dialogues to LO's own. The option to revert to (my preference) > the system dialogues has apparently gone. The information at > > https://help.libreoffice.org/Common/Opening_Documents#System_File_Dialogs_or_LibreOffice_Dialogs > is clearly now wrong. It's not helpful to do this to the poor user!!! > > > -- > Mike Scott (unet2 [deletethis] scottsonline.org.uk) > Harlow Essex England > > -- > To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org > Problems? > http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ > Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette > List archive: http://listarchives.libreoffice.org/global/users/ > All messages sent to this list will be publicly archived and cannot be > deleted > -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress and file dialogue choice
On 09/10/15 20:24, libreoffice-ml.mbou...@spamgourmet.com wrote: Mike Scott wrote: On 09/10/15 12:43, Malcolm Moore wrote: ... This is outstandingly horrible ! Yes. My summary for anyone in the same boat suffering from brain failure at the end of the week: . It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. Not correct AFAICS. Unfortunately, changing print properties doesn't seem to mark the file as needs-to-be-saved, so ^S does nothing (and File|Save is greyed out). That depends on the settings: - Tools > Options > LibreOffice > General > Printing sets "document modified" status and: - Tools > Options > LibreOffice > General > Allow to save document even when the document is not modified Tools > Options > Load/Save > General > Load printer settings with the document probably also affects whether previously saved printer settings are actually used next time the document is opened. Mark. Hmmm. I think the problem here is one of obscurity. Too many options spread over too many dialogues/tabs all affecting results, no obvious way to find what's happening unless you "just know" to look there, and the help file isn't very helpful. There's even inconsistency between programs. Try the following in each of Writer and Impress. Create a new document and save it. Change the printer via File|Print setting. Now look at menu choice File|Save. In Impress, it's greyed out. In Writer, it's available. (Both options you mention above are unset in my system, btw.) To add more annoyance, as part of trying to get my own brochure issue sorted, I upgraded to 5.0.2.2. A minor upgrade, yet it's changed the file load/save dialogues to LO's own. The option to revert to (my preference) the system dialogues has apparently gone. The information at https://help.libreoffice.org/Common/Opening_Documents#System_File_Dialogs_or_LibreOffice_Dialogs is clearly now wrong. It's not helpful to do this to the poor user!!! -- Mike Scott (unet2 [deletethis] scottsonline.org.uk) Harlow Essex England -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
Mike Scott wrote: On 09/10/15 12:43, Malcolm Moore wrote: ... This is outstandingly horrible ! Yes. My summary for anyone in the same boat suffering from brain failure at the end of the week: . It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. Not correct AFAICS. Unfortunately, changing print properties doesn't seem to mark the file as needs-to-be-saved, so ^S does nothing (and File|Save is greyed out). That depends on the settings: - Tools > Options > LibreOffice > General > Printing sets "document modified" status and: - Tools > Options > LibreOffice > General > Allow to save document even when the document is not modified Tools > Options > Load/Save > General > Load printer settings with the document probably also affects whether previously saved printer settings are actually used next time the document is opened. Mark. -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
I stand corrected :-) but the fun continues... If you set it up, save it and reopen it, you are correct it does save the printer settings but then select another identical printer from your list of printers it goes back to A4 for that printer . If then you go 'oops, my mistake' and go back to the original printer that has gone back to A4 again. At that point if you cancel out and do file print again on the original printer it's back to A3. Are there bugs posted for this - this seems almost designed to be a monumental pain in the behind ? Best wishes Mal From: Mike Scott To: Sent: 09/10/2015 1:57 PM Subject: Re: [libreoffice-users] Printing in Impress On 09/10/15 12:43, Malcolm Moore wrote: ... > This is outstandingly horrible ! Yes. > My summary for anyone in the same boat suffering from brain failure at the > end of the week: . > It will then work for the duration of the session as A3 and Landscape are now > selected ( but greyed out again ) > Once you save it and open it again you have to start from the beginning. Not correct AFAICS. Unfortunately, changing print properties doesn't seem to mark the file as needs-to-be-saved, so ^S does nothing (and File|Save is greyed out). However, if the print stuff is set up, and then a substantive change is made followed by a save, the print info is saved as well. But if you need to change it again, you have to go through the whole procedure again. At least it seems that way after a quick experiment. -- Mike Scott (unet2 [deletethis] scottsonline.org.uk) Harlow Essex England -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
On 09/10/15 12:43, Malcolm Moore wrote: ... This is outstandingly horrible ! Yes. My summary for anyone in the same boat suffering from brain failure at the end of the week: . It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. Not correct AFAICS. Unfortunately, changing print properties doesn't seem to mark the file as needs-to-be-saved, so ^S does nothing (and File|Save is greyed out). However, if the print stuff is set up, and then a substantive change is made followed by a save, the print info is saved as well. But if you need to change it again, you have to go through the whole procedure again. At least it seems that way after a quick experiment. -- Mike Scott (unet2 [deletethis] scottsonline.org.uk) Harlow Essex England -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
Eventually the penny dropped, sorry for being thick ! This is outstandingly horrible ! My summary for anyone in the same boat suffering from brain failure at the end of the week: You have to go to 'Tools/Options/LibreOffice Impress/Print Make sure Paper tray from printer settings is unchecked Then 'File/Print' ( at this point the Print/Properties are wrong and greyed out ) Then 'Options' and check 'Use only paper tray from printer preferences' and 'Use only paper size from printer preferences' Then go back to 'General' select the printer and go to 'Properties' ( If you don't do this now it forgets the previous step ) The paper size and orientation are now available to change Then OK It will then work for the duration of the session as A3 and Landscape are now selected ( but greyed out again ) Once you save it and open it again you have to start from the beginning. Mal From: Mike Scott To: Sent: 09/10/2015 9:54 AM Subject: Re: [libreoffice-users] Printing in Impress On 09/10/15 09:31, Malcolm Moore wrote: > Hi, > > > Yes the printer does A3 and borderless > > > Creating an A3 presentation ( Format page / Page ) > will not print as A3 it always comes out as A4. > Using 'Use only paper tray from printer preferences' > means it prints landscape but it is still on A4 As Regina said, you also need to set 'use only paper /size/ from...' as well. Otherwise I see the same symptom (landscape, and size locked to A4). BTW, Impress seems to pick its size differently from Draw, which chooses a more useful default of A3 for an A3 drawing. Haven't we only just been here? :-) :-) :-) I suggest again that the Print dialogue could use some improvement in this area. > > > An A3 Writer document prints as expected > > > Ta > > > Mal > > > > From: Regina Henschel . > > For to enable the printer settings you need to check the options "Use > only paper tray from printer preferences" and "Use only size form > printer preferences" in the tab "Options". > > Kind regards > Regina > -- Mike Scott Harlow, Essex, England -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
On 09/10/15 09:31, Malcolm Moore wrote: Hi, Yes the printer does A3 and borderless Creating an A3 presentation ( Format page / Page ) will not print as A3 it always comes out as A4. Using 'Use only paper tray from printer preferences' means it prints landscape but it is still on A4 As Regina said, you also need to set 'use only paper /size/ from...' as well. Otherwise I see the same symptom (landscape, and size locked to A4). BTW, Impress seems to pick its size differently from Draw, which chooses a more useful default of A3 for an A3 drawing. Haven't we only just been here? :-) :-) :-) I suggest again that the Print dialogue could use some improvement in this area. An A3 Writer document prints as expected Ta Mal From: Regina Henschel . For to enable the printer settings you need to check the options "Use only paper tray from printer preferences" and "Use only size form printer preferences" in the tab "Options". Kind regards Regina -- Mike Scott Harlow, Essex, England -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
Hi, Yes the printer does A3 and borderless Creating an A3 presentation ( Format page / Page ) will not print as A3 it always comes out as A4. Using 'Use only paper tray from printer preferences' means it prints landscape but it is still on A4 An A3 Writer document prints as expected Ta Mal From: Regina Henschel To: Sent: 08/10/2015 2:52 PM Subject: Re: [libreoffice-users] Printing in Impress Hi Malcome, Malcolm Moore schrieb: > If I create a presentation in Impress and set the > page size to A3 landscape, how do I print it ? > > > It always comes out ( partly on ) A4 and the > dropdown to change the paper size in the print > dialog is greyed out at A4 What paper size is your printer able to print on? Has hit got A3? Can it print A4 borderless? For to enable the printer settings you need to check the options "Use only paper tray from printer preferences" and "Use only size form printer preferences" in the tab "Options". Kind regards Regina -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
Re: [libreoffice-users] Printing in Impress
Hi Malcome, Malcolm Moore schrieb: If I create a presentation in Impress and set the page size to A3 landscape, how do I print it ? It always comes out ( partly on ) A4 and the dropdown to change the paper size in the print dialog is greyed out at A4 What paper size is your printer able to print on? Has hit got A3? Can it print A4 borderless? For to enable the printer settings you need to check the options "Use only paper tray from printer preferences" and "Use only size form printer preferences" in the tab "Options". Kind regards Regina -- To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/ Posting guidelines + more: http://wiki.documentfoundation.org/Netiquette List archive: http://listarchives.libreoffice.org/global/users/ All messages sent to this list will be publicly archived and cannot be deleted
