printers listed after deletion
I deleted a network printer and then I reinstalled (by Hplip, by cups, by system-config-printer, for testing) and while in Hplip, Cups or system-config-printer I get only one printer in the list, if I print from Firefox, Thunderbird for example I have in the list also the deleted printers that were installed with different names. Why? -- Antonio Montagnani Linux Fedora 33 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
vinagre
I can connect from my Fedora laptop to my 2 Rasperry's with no issues, they can connect each other with vinagre and vnc, but I cannot connect from either Raspberry to my Fedora laptop with vinagre, as soon as I give permission to connect, connection is closed. Any idea??? no difference if firewall is active or disactivated -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: dnfdragora freezing, pausing, crashing
Richard England ha scritto il 06/05/20 alle 21:02: Steven, I've checked all the locations I know of and using the techniques I'm aware of but I don't seem to be able to locate dnfdragora-1.1.1-6.fc32.noarch.rpm All I turn up for F32 is dnfdragora-2.0.0-2.fc32.noarch.rpm When I checked FC31 it only showed dnfdragora-1.1.1-3.fc31.noarch.rpm Do you have a location where I can find dnfdragora-1.1.1-6.fc32.noarch.rpm Thanks for your time. ~~R On 2020-05-04 04:26, Steven Usdansky via users wrote: The current version of dnfdragora has been crashing for me for about a week. Not wanting to investigate further, I downgraded to dnfdragora-1.1.1-6.fc32.noarch.rpm which still works ___ ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org https://koji.fedoraproject.org/koji/packageinfo?packageID=23704 -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: ODP: Re: dnfdragora freezing, pausing, crashing
Bogusław Augustyniak ha scritto il 04/05/20 alle 13:40: *Yes. It crashes, and isn’t accessible with orca screenreader. On my fedora mate I installed gnome-software package. And it works.* ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org https://bugzilla.redhat.com/show_bug.cgi?id=1828911 please check this bug -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: "dnf upgrade" crashing machine
George Avrunin ha scritto il 29/04/20 alle 13:40: On Tue, 28 Apr 2020 21:04:10 -0600, Jerry James wrote: Andre Robatino posted a link to this bug awhile ago: https://bugzilla.redhat.com/show_bug.cgi?id=1826091 That sounds like the symptoms you are seeing. It's a bug in the 5.6.6 kernel. It should be fixed in the 5.6.7 kernel, which will be available soon: https://bodhi.fedoraproject.org/updates/FEDORA-2020-64c805f706 Thanks! I'll look for 5.6.7 (and be careful when dnf installs it. ;-) George ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org installed 5.6.7 kernel on F32 machines and I thinkthat bug has been solved. Please check also on your side -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
gnome freezing on F32
Installed F32 on two machines last sunday; I have experienced freezing of the machines and I had to hard reboot, Anyone experiencing same issue?? -- Antonio MontagInstalled nani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Grub2 update on F32 strange results
stan via users ha scritto il 25/04/20 alle 18:17: On Sat, 25 Apr 2020 17:55:42 +0200 antonio montagnani wrote: After an update from F31 to F32, the next update sent these warnings, but upgrade was completed: Upgrading: grub2-common-1:2.04-13.fc32.noarch 4/299 errore: lsetfilecon: (/boot/efi/EFI/fedora, system_u:object_r:boot_t:s0) Operazione non supportata Upgrading: grub2-efi-x64-1:2.04-13.fc32.x86_64 110/299 errore: lsetfilecon: (/boot/efi/EFI/fedora/fonts, system_u:object_r:boot_t:s0) Operazione non supportata errore: lsetfilecon: (/boot/efi/EFI/fedora/grubx64.efi;5ea454b1, system_u:object_r:boot_t:s0) Operazione non supportata Operazione non supportata = unsupported operation Any clue?? Running as root, what does ls -nZ in /boot/efi/EFI/fedora show? Are the selinux contexts set properly? If they are, you can ignore the warnings. On my system, instead of boot_t, they show dosfs_t, which is probably correct, since that directory is vfat. So, the error was probably because grub was trying to set an incorrect context, and selinux rejected it. You could open a bugzilla against grub2-common to get this fixed. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 110 2 ott 2018 BOOTX64.CSV drwx--. 2 0 0 system_u:object_r:dosfs_t:s04096 16 apr 22.05 fonts -rwx--. 1 0 0 system_u:object_r:dosfs_t:s05752 30 apr 2019 grub.cfg -rwx--. 1 0 0 system_u:object_r:dosfs_t:s04728 30 apr 2019 grub.cfg.rpmsave -rwx--. 1 0 0 system_u:object_r:dosfs_t:s01024 25 apr 17.49 grubenv -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 2500936 16 apr 22.05 grubx64.efi -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 1159560 2 ott 2018 mmx64.efi -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 1210776 2 ott 2018 shim.efi -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 1210776 2 ott 2018 shimx64.efi -rwx--. 1 0 0 system_u:object_r:dosfs_t:s0 1204496 2 ott 2018 shimx64-fedora.efi Tnx for your reply. Bug has been already opened at this link https://bugzilla.redhat.com/show_bug.cgi?id=1827922 -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Grub2 update on F32 strange results
After an update from F31 to F32, the next update sent these warnings, but upgrade was completed: Upgrading: grub2-common-1:2.04-13.fc32.noarch 4/299 errore: lsetfilecon: (/boot/efi/EFI/fedora, system_u:object_r:boot_t:s0) Operazione non supportata Upgrading: grub2-efi-x64-1:2.04-13.fc32.x86_64 110/299 errore: lsetfilecon: (/boot/efi/EFI/fedora/fonts, system_u:object_r:boot_t:s0) Operazione non supportata errore: lsetfilecon: (/boot/efi/EFI/fedora/grubx64.efi;5ea454b1, system_u:object_r:boot_t:s0) Operazione non supportata Operazione non supportata = unsupported operation Any clue?? -- Antonio Montagnani Linux Fedora 32 (Workstation) Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Firefox in wayland
Samuel Sieb ha scritto il 12/11/19 alle 23:20: On 11/12/19 1:33 PM, Matthew Miller wrote: On Tue, Nov 12, 2019 at 01:06:36PM -0800, Samuel Sieb wrote: ## Enable Wayland backend? ## if true && ! [ $MOZ_DISABLE_WAYLAND ]; then Are you on F31? They must have changed it there. On F30, that line starts with "if false". https://fedoraproject.org/wiki/Changes/Firefox_Wayland_By_Default_On_Gnome I guess I'm just remembering it from F30 where it got pulled for still having issues. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org additional info: Firefox&Wayland are not working properly on mylaptop with intel i915 driver, but they are fine on Wayland with AMD graphics: I filed a bug against Firefox but I suppose that it is a wrong component -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Firefox in wayland
Samuel Sieb ha scritto il 11/11/19 alle 22:21: On 11/11/19 11:19 AM, Matthew Saltzman wrote: On Mon, 2019-11-11 at 17:55 +0100, antonio montagnani wrote: shall I moveto Firefox-wayland when I use wayland? if I switch to Gnome classic what happens?? IIRC, for GNOME, Wayland is the default and firefox-wayland is the default. You can install and run firefox-x11 even when running Wayland, but someone else might be able to say whether the reverse is true. For other desktops, firefox-x11 is the default and if running Wayland, you can install firefox-wayland. firefox-wayland is not the default anywhere yet. It is intended but there are still some issues to fix before that. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org so, my Fedora 31 has been updated from Fedora 6 and the only package for firefox is firefox-70.0-1.fc31.x86_64 . Is it correct??? -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Firefox in wayland
shall I moveto Firefox-wayland when I use wayland? if I switch to Gnome classic what happens?? I am confused -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Noscript add-on for Firefox fuzzy behaviour
antonio montagnani ha scritto il 10/11/19 alle 07:57: stan via users ha scritto il 10/11/19 alle 01:42: On Sat, 9 Nov 2019 22:20:36 +0100 antonio montagnani wrote: after upgrading to F31, when I use the Noscript add-on for Firefox, I note that I cannot set different options (Trusted, untrusted and so on) because mouse must be shifted left compared to the right position, I apologize if I am not clear Is anybody using Noscript add-on?? Works fine here. Did you try manually updating the add-on? I say that in case you have automatic updates turned off. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org I made a test switching from Gnome wayland to Gnome classic ans urprise it works as expected. So, I am going to file for a bug (component to blame is wayland I suppose) https://bugzilla.redhat.com/show_bug.cgi?id=1770520 please add your personal experience -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Noscript add-on for Firefox fuzzy behaviour
stan via users ha scritto il 10/11/19 alle 01:42: On Sat, 9 Nov 2019 22:20:36 +0100 antonio montagnani wrote: after upgrading to F31, when I use the Noscript add-on for Firefox, I note that I cannot set different options (Trusted, untrusted and so on) because mouse must be shifted left compared to the right position, I apologize if I am not clear Is anybody using Noscript add-on?? Works fine here. Did you try manually updating the add-on? I say that in case you have automatic updates turned off. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org I made a test switching from Gnome wayland to Gnome classic ans urprise it works as expected. So, I am going to file for a bug (component to blame is wayland I suppose) -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: Noscript add-on for Firefox fuzzy behaviour
stan via users ha scritto il 10/11/19 alle 01:42: On Sat, 9 Nov 2019 22:20:36 +0100 antonio montagnani wrote: after upgrading to F31, when I use the Noscript add-on for Firefox, I note that I cannot set different options (Trusted, untrusted and so on) because mouse must be shifted left compared to the right position, I apologize if I am not clear Is anybody using Noscript add-on?? Works fine here. Did you try manually updating the add-on? I say that in case you have automatic updates turned off. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org tnx. utomatic updates are on, and I am running two diffeerent systems experiencing same problem. -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Noscript add-on for Firefox fuzzy behaviour
after upgrading to F31, when I use the Noscript add-on for Firefox, I note that I cannot set different options (Trusted, untrusted and so on) because mouse must be shifted left compared to the right position, I apologize if I am not clear Is anybody using Noscript add-on?? Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
Re: System hung over night
SternData ha scritto il 18/07/2018 alle 20:23: On 07/15/2018 07:30 AM, Robert Moskowitz wrote: When I woke up this morning at 5:30 to head to the airport, I heard my system fan going at full speed. I tried to log in to the locked system, but no response. I had to power cycle. Looking back in messages, the last messages were right after 4am: # grep "Jul 15 04" messages Jul 15 04:01:01 lx121e audit[6374]: USER_ACCT pid=6374 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_localuser acct="rgm" exe="/usr/sbin/crond" hostname=? addr=? terminal=cron res=success' Jul 15 04:01:01 lx121e audit[6374]: CRED_ACQ pid=6374 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='op=PAM:setcred grantors=pam_env,pam_localuser,pam_unix acct="rgm" exe="/usr/sbin/crond" hostname=? addr=? terminal=cron res=success' Jul 15 04:01:02 lx121e systemd[1]: Started Session 5 of user rgm. Jul 15 04:01:02 lx121e audit[6374]: USER_START pid=6374 uid=0 auid=1000 ses=5 subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_systemd acct="rgm" exe="/usr/sbin/crond" hostname=? addr=? terminal=cron res=success' Jul 15 04:01:02 lx121e audit[6374]: CRED_REFR pid=6374 uid=0 auid=1000 ses=5 subj=system_u:system_r:crond_t:s0-s0:c0.c1023 msg='op=PAM:setcred grantors=pam_env,pam_localuser,pam_unix acct="rgm" exe="/usr/sbin/crond" hostname=? addr=? terminal=cron res=success' And then nothing until the restart. Any recommendations on where to dig to guess at what caused this? Last night I had done an update and had rebooted the system, so it was a fresh boot, but with all my processes running. thanks Tried 4.17.6, but still have the problem. Back on 4.17.3 https://bugzilla.redhat.com/show_bug.cgi?id=1598462 -- Antonio Montagnani Linux Fedora 28 (Workstation) ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/O5XAO5BWG476L6URQS42ATR4ND3CXTA4/
Re: off-topic : Adobe reader doesn't show file window
Antonio M ha scritto il 28/06/2018 alle 22:23: as Adobe Reader cannot be fully replaced by evince or other application, I note that if I start Acroread and I use the File/open menu, it doesn't work. Using acroread name_of_file in a terminal it works. Any idea? sorry for the off-topic Antonio Montagnani Linux Fedora 28 Workstation da/from Gmail ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/CTUVYLWZHWXRO7UEWBTFN7UYECSOYIZ3/ I don't have access to your file, but I am encountering the same issue with some PDF files. The only reader to use is unfortunately Acrobat Reader itself. No way with evince, qpdf, okular and so on... -- Antonio Montagnani Linux Fedora 28 (Workstation) ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/HX4WUIR25PZDKZMYAALCQ4F43W6EPEQ6/
Re: Strange PDF file (Version 1.7)
Dario Lesca ha scritto il 30/06/2018 alle 18:58: How to read this kind of PDF file without Adobe Reader? [lesca@dodo <mailto:lesca@dodo> pdf-reader]$ file strange-adobe-pdf.pdf strange-adobe-pdf.pdf: PDF document, version 1.7 [lesca@dodo <mailto:lesca@dodo> pdf-reader]$ If I open with one of the Linux PDF Reader I get this message: Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visitinghttp://www.adobe.com/go/reader_download. For more assistance with Adobe Reader visithttp://www.adobe.com/go/acrreader. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac is a trademark of Apple Inc., registered in the United States and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries Thanks for suggest. -- Dario Lesca (inviato dal mio Linux Fedora 28 Workstation) ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/5WR3PSVICP7WLZQERYUC77A345IZICLF/ I don't have access to your file, but I am encountering the same issue with some PDF files. The only reader to use is unfortunately Acrobat Reader itself. No way with evince, qpdf, okular and so on... in some case I note that PDF file was created with fields... -- Antonio Montagnani Linux Fedora 28 (Workstation) ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org/message/ZAMYZXDLDEGXWL3PCGZ4GE63B4O3REDA/
Re: dnf update strange comment
Samuel Sieb ha scritto il 08/11/2017 alle 20:31: On 11/08/2017 09:58 AM, antonio montagnani wrote: Problema 1: cannot install both webkitgtk4-jsc-2.18.2-1.fc26.i686 and webkitgtk4-jsc-2.18.0-1.fc26.i686 - package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 requires webkitgtk4-jsc(x86-32) = 2.18.0-1.fc26, but none of the providers can be installed - cannot install the best update candidate for package webkitgtk4-jsc-2.18.0-1.fc26.i686 - problem with installed package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 Problema 2: webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 has inferior architecture - cannot install both webkitgtk4-plugin-process-gtk2-2.18.2-1.fc26.x86_64 and webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.x86_64 - cannot install the best update candidate for package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 - cannot install the best update candidate for package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.x86_64 I've seen some discussion about multi-lib issues recently that sometimes 32-bit packages are not getting included in the repo. The packages were built: https://koji.fedoraproject.org/koji/buildinfo?buildID=991410 However, I just checked the mirrors and I don't see that version at all, not even in updates-testing. I wonder where you're picking it up from. updates-testing has 2.18.1. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org tnx for your reply. What do you suggest?? Wait and see?? -- Antonio M Skype: amontag52 Linux Fedora F26 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
dnf update strange comment
tonight I get this dnf update Ultima verifica della scadenza dei metadati: 1:19:08 fa il mer 08 nov 2017 17:36:39 CET. Dipendenze risolte. Problema 1: cannot install both webkitgtk4-jsc-2.18.2-1.fc26.i686 and webkitgtk4-jsc-2.18.0-1.fc26.i686 - package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 requires webkitgtk4-jsc(x86-32) = 2.18.0-1.fc26, but none of the providers can be installed - cannot install the best update candidate for package webkitgtk4-jsc-2.18.0-1.fc26.i686 - problem with installed package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 Problema 2: webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 has inferior architecture - cannot install both webkitgtk4-plugin-process-gtk2-2.18.2-1.fc26.x86_64 and webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.x86_64 - cannot install the best update candidate for package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.i686 - cannot install the best update candidate for package webkitgtk4-plugin-process-gtk2-2.18.0-1.fc26.x86_64 pacchetto Arch Versione Repository Dim. Esclusione dei pacchetti con conflitti: (aggiungere '--best --allowerasing' alla lina di comando per forzarne l'aggiornamento): webkitgtk4-jsci686 2.18.2-1.fc26 updates 3.8 M webkitgtk4-plugin-process-gtk2x86_642.18.2-1.fc26 updates 9.7 M Riepilogo della transazione Ignorati 2 pacchetti Nothing to do. Fatto! -- Antonio M Skype: amontag52 Linux Fedora F26 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: wireless mouse dies
Joe Zeff ha scritto il 07/10/2017 alle 00:05: On 10/06/2017 02:54 PM, Rick Stevens wrote: Yeah. As a hardware engineer that has, over many years, transitioned to a software engineer, I always assume my software is buggy. I can't believe how often it turns out it's hardware like a bad cable or something. My rule of thumb is "If it always happens, it's probably software. If it's intermittent, then it's likely hardware. Or not." Pournelle's first rule of debugging is, "The first thing you check is the cables." ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org really it is hard to check cables on a wireless mouse, isn't it?? :-) -- Antonio M Skype: amontag52 Linux Fedora F26 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: Adobe Acrobat & F26
Tom Horsley ha scritto il 18/07/2017 alle 14:55: You could try running ldd with the path to acroread as an arg and see if it says some libraries are not found. If the only problem is missing libraries, perhaps you could get them from an older fedora where acroread worked (or they might be in the repos still, but you just don't have them installed). ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org same here. ldd /usr/bin/acroread not a dynamic executable am I missing something?? -- Antonio M Skype: amontag52 Linux Fedora F26 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Failed update
After proceeding to download updated packages after the usual dnf system-upgrade download --refresh --releasever=26 --allowerasing I get this warning. Is it safe to remove fwupdate-libs and related packages?? Errore: Transaction check error: il file /usr/share/locale/en/libfwup.po entra in conflitto durante il tentativo d'installazione di fwupdate-libs-8-2.fc26.i686 e fwupdate-libs-8-2.fc26.x86_64 Tnx for help -- Antonio M Skype: amontag52 Linux Fedora F25 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: Gparted doesn't start
Michael Schwendt ha scritto il 16/12/2016 alle 12:22: On Fri, 16 Dec 2016 12:03:02 +0100, antonio montagnani wrote: When I start Gparted, after the password request window nothing happens. If started in a terminal I get: gparted Created symlink /run/systemd/system/-.mount → /dev/null. Created symlink /run/systemd/system/boot-efi.mount → /dev/null. Created symlink /run/systemd/system/boot.mount → /dev/null. Created symlink /run/systemd/system/home.mount → /dev/null. Created symlink /run/systemd/system/proc-fs-nfsd.mount → /dev/null. Created symlink /run/systemd/system/run-user-1000.mount → /dev/null. Created symlink /run/systemd/system/run-user-42.mount → /dev/null. Created symlink /run/systemd/system/tmp.mount → /dev/null. Created symlink /run/systemd/system/var-lib-machines.mount → /dev/null. Created symlink /run/systemd/system/var-lib-nfs-rpc_pipefs.mount → /dev/null. No protocol specified (gpartedbin:3003): Gtk-WARNING **: cannot open display: :0 Removed /run/systemd/system/-.mount. Removed /run/systemd/system/boot-efi.mount. Removed /run/systemd/system/boot.mount. Removed /run/systemd/system/home.mount. Removed /run/systemd/system/proc-fs-nfsd.mount. Removed /run/systemd/system/run-user-1000.mount. Removed /run/systemd/system/run-user-42.mount. Removed /run/systemd/system/tmp.mount. Removed /run/systemd/system/var-lib-machines.mount. Removed /run/systemd/system/var-lib-nfs-rpc_pipefs.mount. whtat is going on?? Check out the older ticket at: http://bugz.fedoraproject.org/gparted ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org Tnx for your comment, as I filed the new ticket that is similar to the old one and I didn't detect it. Looking forward to a solution in a Wayland and not for a workaround :-) -- Antonio M Skype: amontag52 Linux Fedora F25 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Gparted doesn't start
When I start Gparted, after the password request window nothing happens. If started in a terminal I get: gparted Created symlink /run/systemd/system/-.mount → /dev/null. Created symlink /run/systemd/system/boot-efi.mount → /dev/null. Created symlink /run/systemd/system/boot.mount → /dev/null. Created symlink /run/systemd/system/home.mount → /dev/null. Created symlink /run/systemd/system/proc-fs-nfsd.mount → /dev/null. Created symlink /run/systemd/system/run-user-1000.mount → /dev/null. Created symlink /run/systemd/system/run-user-42.mount → /dev/null. Created symlink /run/systemd/system/tmp.mount → /dev/null. Created symlink /run/systemd/system/var-lib-machines.mount → /dev/null. Created symlink /run/systemd/system/var-lib-nfs-rpc_pipefs.mount → /dev/null. No protocol specified (gpartedbin:3003): Gtk-WARNING **: cannot open display: :0 Removed /run/systemd/system/-.mount. Removed /run/systemd/system/boot-efi.mount. Removed /run/systemd/system/boot.mount. Removed /run/systemd/system/home.mount. Removed /run/systemd/system/proc-fs-nfsd.mount. Removed /run/systemd/system/run-user-1000.mount. Removed /run/systemd/system/run-user-42.mount. Removed /run/systemd/system/tmp.mount. Removed /run/systemd/system/var-lib-machines.mount. Removed /run/systemd/system/var-lib-nfs-rpc_pipefs.mount. whtat is going on?? -- Antonio M Skype: amontag52 Linux Fedora F25 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
two wireless cards
When I connect an external wi-fi card, if I switch off the internal card, also the external card is switched off. That is not correct, IMHO. And I remember that in F24 I had the option to switch off only one card. Using the terminal I can switch off the card, but it doesn't work in the graphical interface -- Antonio M Skype: amontag52 Linux Fedora F25 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: how to login to the list
Patrick O'Callaghan ha scritto il 20/10/2016 alle 18:45: On Thu, 2016-10-20 at 13:29 -0300, Fernando Cassia wrote: On Thu, Oct 20, 2016 at 12:56 PM, antonio montagnani < antonio.montagn...@alice.it> wrote: I am receiving all posts, but if I try to log to the list and I say that I forgot the password, I get the answer that this e-mail is not connected to any account!!! That of course is not possible This is a mailing list, not a web-based forum. There is nothing to log-in to. To send messages you write a new e-mail to the list address and everyone subscribed gets it into their inboxes. Some services like Google Groups and Yahoo groups host discussion groups which can be accessed like a traditional mailing list and also as a web based forum (in other words reading and writing new messages from its web interface). But AFAIK this is a traditional style mailing list . Yes, but the web-based archive system changed a few months ago, (to something that is IMHO markedly worse than what it used to be) and that does require a login. ___ in the previous interface I could log in by e-mail address and password, and now ?? I don't have any user accountor if I had one I have no idea how to recover it -- Antonio M Skype: amontag52 Linux Fedora F24 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
how to login to the list
I am receiving all posts, but if I try to log to the list and I say that I forgot the password, I get the answer that this e-mail is not connected to any account!!! That of course is not possible -- Antonio M Skype: amontag52 Linux Fedora F24 (Workstation Edition) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Firewall behaviour is strange on one of my systems
I am using a desktop where I have connected a printer: if I enable the firewall I can connect by IP numbers and print if printer is nameofprinter@IPof desktop (the same with vinagre, i can connect by IP numbers and not by names): the only way to print (and connect by names in vinagre, and share Public Files) is to have firewall stopped. This is my firewall configuration: FedoraWorkstation (default, active) interfaces: p19p1 sources: services: dhcpv6-client dns ipp ipp-client mdns samba-client ssh ports: 1025-65535/udp 1025-65535/tcp masquerade: no forward-ports: icmp-blocks: rich rules: any help??? Tnx -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty Two) on PcDesktop1 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: e2fsck after hard shutdown
Michael D. Setzer II ha scritto il 05/09/2015 alle 08:21: As root you can run this # touch /forcefsck Then the next reboot should result in it running an fsck on the root partition as part of the boot. I have an option on my classroom machines, that has it boot with a kernel that runs in just ram, and it does an fsck of all of the regular linux partitions on the disk to confirm everything is error free. One could also boot from a live cd and run fsck since the partitions should not be mounted. On 5 Sep 2015 at 7:59, Ralf Corsepius wrote: Subject:Re: e2fsck after hard shutdown To: users@lists.fedoraproject.org From: Ralf Corsepius Date sent: Sat, 5 Sep 2015 07:59:50 +0200 Send reply to: Community support for Fedora users On 09/05/2015 07:31 AM, antonio montagnani wrote: do you mean that I could run e2fsck from inside the root shell? Yes. I guessed that filesystems were already mounted and e2fsck doesn't work on mounted filesystems I have to study. :-) Depends, depends on what actually happened/gone wrong. In most such cases, the filesystems are mounted read-only or not mounted at all. Ralf -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org +--+ Michael D. Setzer II - Computer Science Instructor Guam Community College Computer Center mailto:mi...@kuentos.guam.net mailto:msetze...@gmail.com http://www.guam.net/home/mikes Guam - Where America's Day Begins G4L Disk Imaging Project maintainer http://sourceforge.net/projects/g4l/ +--+ http://setiathome.berkeley.edu (Original) Number of Seti Units Returned: 19,471 Processing time: 32 years, 290 days, 12 hours, 58 minutes (Total Hours: 287,489) BOINC@HOME CREDITS ROSETTA 33898211.543299 | SETI61203875.206697 ABC 16613838.513356 | EINSTEIN70320821.471095 I am not sure that it could work with system.d systems -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: e2fsck after hard shutdown
Robert Nichols ha scritto il 05/09/2015 alle 03:32: On 09/04/2015 04:40 PM, antonio montagnani wrote: Sometimes if you have to shut-down improperly or power is missing, it happens that your system doesn't start in the usual way, but in a kind of emergency mode, and you can enter in it by Ctrl D...after that usually you have to make a control on your filesystem using an installation media (DVD or USB key) and running e2fsck at least on your /home. Is it not possible to run e2fsck during the standard boot before filesystems are mounted?? (maybe a stupid question, forgive me and my bad english) Instead of typing Ctrl-D, enter the root password and you should get a root shell, from which you can run e2fsck. The only time you should need to do that is if the filesystem has damage more serious than can be safely repaired by the automatic fsck. Since you mentioned "e2fsck" I'm assuming that your filesystem is ext2/3/4. If it's actually one of the newer, more exotic types (xfs, btrfs, ...), none of this advice may apply. do you mean that I could run e2fsck from inside the root shell? I guessed that filesystems were already mounted and e2fsck doesn't work on mounted filesystems I have to study. :-) -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
e2fsck after hard shutdown
Sometimes if you have to shut-down improperly or power is missing, it happens that your system doesn't start in the usual way, but in a kind of emergency mode, and you can enter in it by Ctrl D...after that usually you have to make a control on your filesystem using an installation media (DVD or USB key) and running e2fsck at least on your /home. Is it not possible to run e2fsck during the standard boot before filesystems are mounted?? (maybe a stupid question, forgive me and my bad english) -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: unmaintained bugs
Roger Heflin ha scritto il 25/07/2015 alle 17:54: You are assuming that the maintainers are employed/paid to maintain that project. In quite a number of cases they are not paid for it, so given that you may or may not get it fixed. And if I was a volunteer for a project and my "supervisor" started harassing me, then you would need a new maintainer for that project. Remember they are not being paid and you are not paying for the product. Even when one has an expensive paid support contract getting some things fix is still often impossible/difficult and in that case there is some limited contract requirements for the support organization to help you. Remember most of the less used parts are volunteers they may or may not have time to fix the bug. I have fixed a few bugs that were in stuff that I used and that I was pretty sure there was no paid person to maintain. I submitted the fix/patch back to fedora and they fairly quickly put that patch into an update. This is how open source generally can work, others see the bug, figure out the fix and submit the fix. On Sat, Jul 25, 2015 at 4:02 AM, antonio montagnani wrote: Chris Murphy ha scritto il 24/07/2015 alle 16:47: On Fri, Jul 24, 2015 at 7:58 AM, Matthew Miller wrote: On Fri, Jul 24, 2015 at 08:36:05AM +0200, antonio montagnani wrote: * If a package maintainer appears to be totally unresponsive to bug reports, follow the process here: https://fedoraproject.org/wiki/Policy_for_nonresponsive_package_maintainers and when you contact him, you get the answer not to contact him on his personal mail (that is the same as in bugzilla)??? https://fedoraproject.org/wiki/Policy_for_nonresponsive_package_maintainers#Notes_for_invalid_email_addresses responsive |riˈspänsiv| adjective 1 reacting quickly and positively I'd say a maintainer who responds to an email saying not to contact him on that email, is non-responsive. no, I am not assuming that maintainers are paid, but when you are a volunteer you must be honest to you and other people to say when you cannot continue to be a volunteer. And the circle is broken when the final user reports a bug but nobody seems to be working on it for a long time and you have no feedback -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: unmaintained bugs
Chris Murphy ha scritto il 24/07/2015 alle 16:47: On Fri, Jul 24, 2015 at 7:58 AM, Matthew Miller wrote: On Fri, Jul 24, 2015 at 08:36:05AM +0200, antonio montagnani wrote: * If a package maintainer appears to be totally unresponsive to bug reports, follow the process here: https://fedoraproject.org/wiki/Policy_for_nonresponsive_package_maintainers and when you contact him, you get the answer not to contact him on his personal mail (that is the same as in bugzilla)??? https://fedoraproject.org/wiki/Policy_for_nonresponsive_package_maintainers#Notes_for_invalid_email_addresses responsive |riˈspänsiv| adjective 1 reacting quickly and positively I'd say a maintainer who responds to an email saying not to contact him on that email, is non-responsive. I find really silly that when you are encharged of a bug, there is no kind of supervisor checking if you are are working on it and any problem arisingImagine it at Nasa, ehi guy, I have no time to check your bug and don't bother me :-) -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: unmaintained bugs
Matthew Miller ha scritto il 21/07/2015 alle 19:09: On Tue, Jul 21, 2015 at 06:53:12PM +0200, antonio montagnani wrote: for my info, when a bug can be defined orphaned, i.e. which is the grace period not to be sorpassed??? I don't know what sorpassed means. But * When a Fedora release reaches end-of-life, bugs filed against that release are automatically closed as "EOL". If you know that bug still exists in a supported version, please reopen these and reassign them to the current version or to rawhide. * If a package maintainer appears to be totally unresponsive to bug reports, follow the process here: https://fedoraproject.org/wiki/Policy_for_nonresponsive_package_maintainers and when you contact him, you get the answer not to contact him on his personal mail (that is the same as in bugzilla)??? -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
unmaintained bugs
for my info, when a bug can be defined orphaned, i.e. which is the grace period not to be sorpassed??? -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Dnf-yumex doesn't recognize root password
after this morning updated, dnf-yumex doesn't work anymore as it doesn't understand my root passwor (error 36). Is anybody taking care to make any test before issuing updates (from testing-updated to updates)?? -- Antonio M Skype: amontag52 Linux Fedora F22 (Twenty two) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F22 - DNF migrate
if I issue the command dnf-2 migrate I get: vim-minimal-7.4.475-2.fc20.x86_64 found in DNFDB; skipping vlc-2.1.5-1.fc20.x86_64 found in DNFDB; skipping vino-3.14.2-1.fc21.x86_64 found in DNFDB; skipping vim-common-7.4.027-2.fc19.x86_64 found in DNFDB; skipping vte291-0.38.3-1.fc21.x86_64 found in DNFDB; skipping vim-enhanced-7.4.475-2.fc20.x86_64 found in DNFDB; skipping 3930 YUMDB records found, 0 migrated, 3930 skipped/preserved Migrating groups data... Yum command has been deprecated, use dnf instead. See 'man dnf' and 'man yum2dnf' for more information. Errore: Malformed yum output Not very familiar with Dnf.What does it mean?? -- Antonio M Skype: amontag52 Linux Fedora F22 on PcDesktop1 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Fedora on Rasperry: Arduino is not working
when I compile a sketch in the Arduino Ide I get this error: avr-g++: error trying to exec 'cclplus' : execcvp : No such file or directory working great in raspian -- Antonio M Skype: amontag52 Linux Fedora F21 (Twenty one) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://campingmonterosa.altervista.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: [SOLVED] Re: [F21] NetworkManager won't connect
Marco Guazzone ha scrito il 17/01/2015 alle 14:31: On Sat, Jan 17, 2015 at 9:39 AM, antonio wrote: Marco Guazzone ha scrito il 17/01/2015 alle 09:16: On Sat, Jan 17, 2015 at 8:39 AM, Marco Guazzone wrote: Hello, I have connectivity problem since the last two updates of NM. Specifically, when I boot the system and I log in in the graphical environment (XFCE in my case), the NM applet continuesly animates, trying to connect to my network. I can wait any time (actually I've tried for a max waiting time of 10 minutes), but NM seems to have trouble to connect. In order to connect I have to: 1. Right-click on the NM applet and deselect "Enable Networking". The applet stops animating 2. Again, right-click on the NM applet and re-select "Enable Networking". Now, NM successfully connects to the network. Am I alone to experience such problem? The NM version is 0.9.10.1-1.2.20150109git for Fedora 21 x86_64 I've just updated NM to the version that is currently in updates-testing http://koji.fedoraproject.org/koji/buildinfo?buildID=604111 and the problem seems to be fixed. Bye, -- Marco I am experiencing a similar issue: sometimes NM doesn't connect to my wireless network, I have to switch to a different wireless net, then back to my network: but if only one network is available, I have to switch off and on NM In my case, the patched NM solved the problem. If you want, you can try it as follows: 1. Enable the yum repo /etc/yum.d/fedora-updates-testing.repo $ sudo vi /etc/yum.d/fedora-updates-testing.repo (change "enabled=0" in "enabled=1") 2. sudo yum update NetworkManager 3. Disable the "feodra-updates-testing" repo $ sudo vi /etc/yum.d/fedora-updates-testing.repo (change "enabled=1" in "enabled=0") 4. Reboot and cross your fingers -- Marco you have to download from koij, I don't see it in updates-testing. I can wait, it is really a minor issue Tnx anyway -- Antonio M Skype: amontag52 Linux Fedora F21 (Twenty one) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
wireless is strange
I am connected to a Picostation as repeater: sometimes laptop is disconnected and I see a question mark on the top line wireless icon, and it connects again only if I switch of and then on the wirelss... in F20 it never happened.Smarthphone is always connected Any idea??? -- Antonio M Skype: amontag52 Linux Fedora F21 (Twenty one) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Monitor is not blanketed when inactive
I note today that when my system becomes inactive (let me say 5 minutes) monior is not blacked...it was working before latest updates -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
Ed Greshko ha scrito il 11/09/2014 alle 01:24: On 09/11/14 06:24, antonio wrote: I knew the systemctl way of switching, but I am lazy (and love the graphical tool): I hope that maintainer will report some improvement in a fairly short time, in the meantime I will see if kdm has no issues.. Tnx again for help (I learnt a lot from you guys) OK Sounds like it shouldn't take too long to determine if the switch to kdm is a valid workaround. I hope one of the lessons to be learned is "don't jump to conclusions". :-) :-) so far switching from gdm to kdm works fine: but I don't see any improvement/activity on reported bugs in bugzilla -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
Ed Greshko ha scrito il 10/09/2014 alle 22:57: On 09/11/14 00:32, antonio montagnani wrote: [root@Fujiantonio ~]# ps -eaf | grep X root 653 1 0 18:27 ?00:00:00 /usr/bin/abrt-watch-log -F Backtrace /var/log/Xorg.0.log -- /usr/bin/abrt-dump-xorg -xD root 1291 1244 0 18:30 pts/100:00:00 grep --color=auto X it seems that X is not started, doesn't it?? Yes While the bug doesn't mention that in particular, it would seem consistent with the bug. Would you like to switch to a different Display Manager to see if you can work around the issue? I would require adding some additional Fedora packages. You will still be using Gnomejust not Gnome's gdm. installed kdm and the graphical display manager switch tool: let us see if same problem will be present in kdm (not sure but in abovementioned bug a reported stated that he had no improvement withi lightdm) tnx again -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
Anders Wegge Keller ha scrito il 10/09/2014 alle 14:49: On Mon, 8 Sep 2014 08:51:28 +0200 Antonio M wrote: When I start one of my systems, sometimes it stalls, even using Esc to see what is going on, I cannot enter the text mode.If I issue a Ctrl+Alt+Del, it switches to text mode but it is so fast that I cannot read anything.. Any advice is appreciated (is systemd to be blamed?) Systemd is probably involved, but I rather suspect plymouth to be the real culprit. If you have the ability to get to a console (CTRL+ALT+Fn), try logging in as root there, and switch to runlevel 3 and back to runlevel 5. That does the trick for me. from ssh I issued an init 3, I got the request for username and I logged...then startx and it is working...so what is the component to blame??? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on PcDesktop1 http://lugsaronno.altervista.org http://www.campingmonterosa.com <>-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
Ed Greshko ha scrito il 10/09/2014 alle 16:01: On 09/10/14 19:17, antonio wrote: Gdm Gnome: it is a pretty standard installationhow do I kill X when ssh-ing?? Tnx again (I have to wait until problem is out again) Well, assuming you can ssh into that system, when you do the "ps -eaf | grep X" and the X server is running you will get a line similar to root 1365 1320 1 Sep03 tty1 03:11:27 /usr/bin/X :0 vt1 -background none -nolisten tcp -seat seat0 -auth /var/run/kdm/A:0-xBMk9b you can then just do a "sudo kill -9 1365" replacing the 1365 with the number you get. Now with all that said. I just noticed the following in you failed.boot file set 10 06:00:51 Fujiantonio gdm[741]: GdmLocalDisplayFactory: Failed to issue method call: È stato raggiunto il timeout This then led me to find. https://bugzilla.redhat.com/show_bug.cgi?id=1018902 Which sounds very similar to what you're reporting. [root@Fujiantonio ~]# ps -eaf | grep X root 653 1 0 18:27 ?00:00:00 /usr/bin/abrt-watch-log -F Backtrace /var/log/Xorg.0.log -- /usr/bin/abrt-dump-xorg -xD root 1291 1244 0 18:30 pts/100:00:00 grep --color=auto X it seems that X is not started, doesn't it?? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on PcDesktop1 http://lugsaronno.altervista.org http://www.campingmonterosa.com <>-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
antonio ha scrito il 10/09/2014 alle 17:31: Ed Greshko ha scrito il 10/09/2014 alle 16:01: On 09/10/14 19:17, antonio wrote: Gdm Gnome: it is a pretty standard installationhow do I kill X when ssh-ing?? Tnx again (I have to wait until problem is out again) Well, assuming you can ssh into that system, when you do the "ps -eaf | grep X" and the X server is running you will get a line similar to root 1365 1320 1 Sep03 tty1 03:11:27 /usr/bin/X :0 vt1 -background none -nolisten tcp -seat seat0 -auth /var/run/kdm/A:0-xBMk9b you can then just do a "sudo kill -9 1365" replacing the 1365 with the number you get. Now with all that said. I just noticed the following in you failed.boot file set 10 06:00:51 Fujiantonio gdm[741]: GdmLocalDisplayFactory: Failed to issue method call: È stato raggiunto il timeout This then led me to find. https://bugzilla.redhat.com/show_bug.cgi?id=1018902 Which sounds very similar to what you're reporting. I joined that bug, as I have same problems of comment #12. In particular I get: systemd[1] bus_get_selinux_context failed: resource temporarily unavailable systemd: Failed to get caller's security context on: resource temporarily unavailable. Now I switched Selinux to permissive to see if it is connected no, Selinux in permissive mode doesn't cure the problem -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on PcDesktop1 http://lugsaronno.altervista.org http://www.campingmonterosa.com <>-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: One of my systems stalls at start-up
Ed Greshko ha scritto / said the followingil giorno/on 09/09/2014 02:31: On 09/09/14 08:13, Rick Stevens wrote: On 09/08/2014 05:00 PM, Ed Greshko issued this missive: On 09/09/14 07:55, Joe Zeff wrote: On 09/08/2014 04:39 PM, Ed Greshko wrote: systemctl start network.service You might want to try this first: systemctl status network.service This will not only verify that it's down, it will tell you why it failed. No. Remember I said to start in "single user mode" so it is *expected* that it will start in the DOWN status. I just wanted to verify that the link is shown as existing. If the link is down, the boot probably hasn't stalled, but assuming things like sendmail and such are configured, it can take a LONG time to come up because DNS resolution will have time out before things will continue. One thing is true. Nobody asked the OP how long he let the system sit before he decided it was "stalled". So, I ask that now. How long, Antonio, did you wait for the system to come up the login screen before you decided it was "stalled". 1) In a "normal" operation (but I am online by wireless card): systemctl status network.service network.service - LSB: Bring up/down networking Loaded: loaded (/etc/rc.d/init.d/network) Active: inactive (dead) 2) Ed, do you mean that waiting for a minute or two is too short? :-) 3) I repeat, this behaviour is not constant Waiting for your advice. Tnx to all -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: System starts in emergency mode...how do I recover ?? (as a newbie)
Ed Greshko ha scritto / said the followingil giorno/on 25/08/2014 07:06: On 08/25/14 12:59, antonio wrote: recovered using a Live Fedora and run a fsck on /dev/sda. Run a smartctl test with no errors. Any idea what could have caused it?? Good. Possible caused by improper power down I would also run... smartctl --all /dev/sda | grep Real To see if any badspots have been reallocated. smartctl --all /dev/sda | grep Real 5 Reallocated_Sector_Ct 0x0033 100 100 005Pre-fail Always - 0 196 Reallocated_Event_Count 0x0032 100 100 000Old_age Always - 0 can you explain??? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
System starts in emergency mode...how do I recover ?? (as a newbie)
Suddenly my laptop when rebooted doesn't start in the usual way After six months of hard work) but it stops when bootib with this message drm:cpt-serr_int_handler ERROR PCH transcoder a FIFO underrun and the appears some lines with request for password for maintenance mode or CTRL-D option... If I open journalctl -xb I see some errors in particular saying that fsck failed with error code 4 on dev/mapper/fedora and suggestint to use fsck. How do I revover from this situation?? (I am writing from this machine started with CTRL-D option) Tnx -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Cannot make a copy of video DVD with k3b
Joe Zeff ha scritto / said the followingil giorno/on 07/08/2014 08:34: On 08/06/2014 11:31 PM, Doug wrote: This is not an answer, but a question: Is there a bit-by-bit copy program that will copy _anything_ exactly, including encoding. so that Antonio's last comment becomes moot? You should be able to do that with dd. of course I solved as suggested changing the image folderbut in my opinion for a new Linux user it should not happen to have to change any k3b setting as it should work immediately or to have to use dd. Please note that this is a fresh Fedora 20 installation and it is the first time that I wanted to make a DVD copy on this machine (it didn't happen for example in F18 or F19 on another machine) Tnx to all -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Cannot make a copy of video DVD with k3b
I got a DVD recorded with a Sony DVD player. When I try to make a copy 1:1 using k3b I get the error that seems no available space in temporary folder!!! Temporary folder seems to be /tmp/kde-antonio/sony_dvd_recorder_volume and available space is detected as 1.9GB while project space is 4.2 GB I tried also with Brasero but copy was incomplete and I wasted a new DVD. Forgot to say that recorded files on original DVD are ok. (DVD is played fine). Anyway I can't do a copy of Video files on my PC as permits don't allow it. -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: New kernel in updates-testing prevents from fast shut-down on one ofmy systems
Joe Zeff ha scritto / said the followingil giorno/on 17/04/2014 02:11: On 04/16/2014 12:33 PM, antonio montagnani wrote: Installed 3.13.10-200.fc20.x86_64 kernel When shutting down from inside a session I get a stop job is running for user session andit takes a long time to shut down, that is normal if I shut down after exiting any session. What happens when you boot the previous kernel? If this doesn't happen, you might want to give the new kernel some negative karma. any previous kernel works fine, but I can't give any karma as it seem already in stable repo -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: New kernel in updates-testing prevents from fast shut-down on one ofmy systems
poma ha scritto / said the followingil giorno/on 16/04/2014 23:50: On 16.04.2014 21:33, antonio montagnani wrote: Installed 3.13.10-200.fc20.x86_64 kernel When shutting down from inside a session I get a stop job is running for user session andit takes a long time to shut down, that is normal if I shut down after exiting any session. Kernel!? :) $ rpm -q --changelog systemd | less poma I assumed kernel as it was the only update to system. Then I filed a bug against systemd https://bugzilla.redhat.com/show_bug.cgi?id=1088619 * lun apr 07 2014 Zbigniew Jędrzejewski-Szmek - 208-16 - Rework systemd-logind shutdown logic (#1032695) - Fix saving of logind session state and change notifications - Enable timeouts for generator execution - Recognize buttonless joystick types (https://bugs.freedesktop.org/show_bug.cgi?id=70734) - Fix policykit check for reboot - Fix udev behaviour for unconnected loop devices - Fix overflow on password entry (#1084286) - Update hardware database - Consider glusterfs and fuse.glusterfs to be networked filesystems - Fix journalctl -o export for multiline messages - Fix get_catalog() in systemd-python for UUID arguments under Python 3 - Documentation updates -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on PcDesktop1 http://lugsaronno.altervista.org http://www.campingmonterosa.com <>-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: New kernel in updates-testing prevents from fast shut-down on one ofmy systems
antonio montagnani ha scritto / said the followingil giorno/on 16/04/2014 21:33: Installed 3.13.10-200.fc20.x86_64 kernel When shutting down from inside a session I get a stop job is running for user session andit takes a long time to shut down, that is normal if I shut down after exiting any session. The correct message is: a stop job is running for Session 1 of user antonio -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
New kernel in updates-testing prevents from fast shut-down on one ofmy systems
Installed 3.13.10-200.fc20.x86_64 kernel When shutting down from inside a session I get a stop job is running for user session andit takes a long time to shut down, that is normal if I shut down after exiting any session. -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re:Laptop bootup randomly stalls
even my laptop is affected, I have no idea where to look, I am not so expert.Shall we file a bug against plymouth? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Fujitsu Lifebook A512 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Session expiration after desired time
Ed Greshko ha scritto / said the followingil giorno/on 07/03/2014 14:42: On 03/07/14 21:25, antonio.montagn...@alice.it wrote: We are setting up a kiosk for a library with Fedora xguest (running Lxde) How can I force the guest session (and only the guest session) to expire after an hour (or any desired time)?? Tnx for help Are you saying you want to force a logout even if the guest is still using, or are you saying you want to logout after inactivity? For inactivity, adding "export TMOUT=#seconds" to .bashrc should do the trick. The library policy is that an user should connect for an hour, and it should provide an automatic logoff with a pop-up window that tell the user that is close to be logged off. Tnx for help -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Gnome is sometimes blurred
Steve Searle ha scritto / said the followingil giorno/on 06/03/2014 12:46: Around 04:16pm on Wednesday, March 05, 2014 (UK time), antonio wrote: Sometimes when I start my laptop (with Intel card) Gnome doesn't start as it should, icons are in the wrong position (I mean that the top panel is sitting on the right and I get the wheel on the bottom left angle of the screen). Any idea?? should I file a bug against Gnome?? I can't help that much, but this does happen to me on both my Fedora 20/GNOME desktops quite frequently. So I presume it isn't Intel related. I currently get round it by logging into a virtual console as root, and running telinit 3 then telinit 5, which is quicker than rebooting. Steve Sometimes before getting into Gnome no user name appears on the login screen, afterwards when I get into Gnome panel icons are in the wrong position. It happened only recently, no idea what is the update that caused this problem -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F20: some characters are missing in the icon titles
After latest updates I note that some characters are missing from icon titles. Am I alone??? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: update partially fails
Patrick Dupre ha scritto / said the followingil giorno/on 18/01/2014 17:59: Hello, The last update did not go very well. I got: Failed: bind.i686 32:9.9.4-8.fc20 bind.i686 32:9.9.4-11.P2.fc20 firefox.i686 0:26.0-3.fc20 firewalld.noarch 0:0.3.9-1.fc20 initscripts.i686 0:9.50-1.fc20 initscripts.i686 0:9.51-1.fc20 nfs-utils.i686 1:1.2.8-6.0.fc20 nfs-utils.i686 1:1.2.9-2.1.fc20 selinux-policy-targeted.noarch 0:3.12.1-116.fc20 selinux-policy-targeted.noarch 0:3.12.1-117.fc20 tcpdump.i686 14:4.5.0-1.20131108gitb07944a.fc20 tcpdump.i686 14:4.5.1-1.fc20 yum.noarch 0:3.4.3-129.fc20 then rpm -q yum yum-3.4.3-129.fc20.noarch yum-3.4.3-130.fc20.noarch yum remove yum-3.4.3-129.fc20.noarch Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package yum.noarch 0:3.4.3-129.fc20 will be erased --> Finished Dependency Resolution Dependencies Resolved Package ArchVersion Repository Size Removing: yum noarch 3.4.3-129.fc20@updates 5.4 M Transaction Summary Remove 1 Package Installed size: 5.4 M Is this ok [y/N]: y Downloading packages: Running transaction check Running transaction test Transaction test succeeded Running transaction error: %preun(yum-3.4.3-129.fc20.noarch) scriptlet failed, exit status 127 Error in PREUN scriptlet in rpm package yum-3.4.3-129.fc20.noarch Verifying : yum-3.4.3-129.fc20.noarch1/1 Failed: yum.noarch 0:3.4.3-129.fc20 Complete! === Patrick DUPRÉ | | email: pdu...@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France === it is a common bug since yesterday. Please check in the mail archive about failed scripts. Anyway the easiest way is to set Selinux to permissive, perform update and back to enforcing. Hope it can help -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F20: yum gives strange messages
Frank Murphy ha scritto / said the followingil giorno/on 17/01/2014 17:54: On Fri, 17 Jan 2014 17:47:29 +0100 antonio montagnani wrote: updating my F20 I get this kind of messages!!! with the failure to update Check the archives for today. Full details are there. ___ Regards, Frank www.frankly3d.com tnx Frank. I saw archive just after sending the message (shame on me): I updated to selinux policy in updates-testing, that seems to solve the problem: any action to do toclean the system or the system will be cleared by itself?? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F20: yum gives strange messages
updating my F20 I get this kind of messages!!! with the failure to update Downloading packages: nfs-utils-1.2.9-2.1.fc20.i686.rpm | 356 kB 00:01 Running transaction check Running transaction test Transaction test succeeded Running transaction error: %pre(nfs-utils-1:1.2.9-2.1.fc20.i686) scriptlet failed, exit status 127 Error in PREIN scriptlet in rpm package 1:nfs-utils-1.2.9-2.1.fc20.i686 Verifica in corso : 1:nfs-utils-1.2.9-2.1.fc20.i686 1/2 1:nfs-utils-1.2.8-6.0.fc20.i686 was supposed to be removed but is not! Verifica in corso : 1:nfs-utils-1.2.8-6.0.fc20.i686 2/2 Fallito: nfs-utils.i686 1:1.2.8-6.0.fc20nfs-utils.i686 1:1.2.9-2.1.fc20 Completo! -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F-20: no shutdown/reboot due to unstopped jobs
antonio ha scritto / said the followingil giorno/on 18/12/2013 20:53: Chris Murphy ha scritto / said the followingil giorno/on 18/12/2013 20:48: On Dec 18, 2013, at 5:11 AM, antonio montagnani wrote: when I want to poweroff/reboot the machine I get this message: a stop job is running for User Manager for 42 and it takes a very long time to stop Sometimes I get a similar message for CUPS printing Any idea?? Might be a variant of this bug: https://bugzilla.redhat.com/show_bug.cgi?id=1023820 What you can do as a work around is: sync && reboot -f That's an abrupt forced reboot but syncs and should unmount file systems cleanly. Chris Murphy https://bugzilla.redhat.com/show_bug.cgi?id=1044602 Please have a look: it seems different, but I am not a technician :-) Tnx anyway it is related to some problem at cups services stoppage,as if I issue a systemctl stop cups I get : systemctl stop cups Warning: Stopping cups, but it can still be activated by: cups.path cups.socket after a couple of minutes waiting -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F-20: no shutdown/reboot due to unstopped jobs
when I want to poweroff/reboot the machine I get this message: a stop job is running for User Manager for 42 and it takes a very long time to stop Sometimes I get a similar message for CUPS printing Any idea?? -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Smooth Upgrade
Dave Cross ha scritto / said the followingil giorno/on 18/12/2013 10:21: Upgraded my Dell XPS 14z laptop from F19 to F20 last night using fedup. Everything went smoothly and within an hour I was happily using F20. Probably the smoothest upgrade I've seen between two versions of Fedora (and I've been using Fedora for ten years). Thanks to everyone who put time and effort into making the upgrade process work so well. Dave... same here on an old laptop and a brand new laptop Tnx everybody -- Antonio M Skype: amontag52 Linux Fedora F20 (Heisenbug) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Gnome & Clementine
When I start Clementine from inside Firefox (i.e. connecting to radio stream of www.liveireland.com, music starts but Clementine is not shown (playing in the background..so when I want to stop it I have to use System Monitor to kill)- But this happens in Gnome not in Mate for example. Is anyone elsenoting this?? -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: No access to DHCP table on my router
antonio ha scritto / said the followingil giorno/on 14/11/2013 10:58: Roberto Ragusa ha scritto / said the followingil giorno/on 14/11/2013 10:42: On 11/13/2013 06:36 PM, antonio montagnani wrote: This is the script that is not working any more (and prevents me from seeing connected clients) May be related to popup blocking? no, window opens but table is empty (that clearly is not true): same problem with latest Firefox in Windows. But I am trying to connect to my provider of electric energy/gas and when I want todownload my invoices I cannot connect, while in Windows it works flawlessy (I am sure that it was working also in Linux) http://192.168.1.1/DHCPTable.asp when I want to see my DHCP pages https://login.enel.com/adfs/ls/EnelPassiveLogon.aspx when I want to connect to my energy provider (but nothing happens) -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com <>-- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: No access to DHCP table on my router
antonio ha scritto / said the followingil giorno/on 12/11/2013 19:19: after some updates on my system I cannot see my DHCP table of my router through webpages:I guess that is connected to some modification in javascript management in latest Firefox.My router is a Lynksis Cisco X3000 with latest firmware This is the script that is not working any more (and prevents me from seeing connected clients)
3D printing
we are testing a 3D printer, with Marlin driver.With Repitiert Host at first test we didn't get any connection with 25 baud rate.From googling around I am confused if 25 baud can be accepted by Fedora (I think so) Printer works fine in Windows with same baud rate.Are we missing some point?? Printer is 3drag from an Italian company, Futura Elettronica -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F19:personal file sharing doesn't work
antonio ha scritto / said the followingil giorno/on 30/09/2013 00:05: Mateusz Marzantowicz ha scritto / said the followingil giorno/on 29/09/2013 23:58: On 29.09.2013 21:16, antonio wrote: when I want to share files in a easy way, I was used to Personal Files Sharing. Now I enabled it on my F19 systems (both in Gnome and Mate) but something seems wrong: When I open Resources/Network I see shares of computers A and B but: working on A clicking on B I get : Impossible to mount position Error HTTP: Cannot connect to destination (PCdesktop.local) Clicking on A (per quanto abbia senso) I get: Impossible to mount the position Error HTTP: Internal Server Error Same if I work on B any hint?? googling around didn't give me any clue Tnx Firewall? Mateusz Marzantowicz same when Firewalld is stopped Personal-file-sharing (Gnome-user-share or Mate-user-share) works only if: 1)firewalld service is stopped/disabled 2)password is set to join Public shares It shouldn't work like this, see https://bugzilla.redhat.com/show_bug.cgi?id=1013385 in particular comment #9 -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F19: Gnome 3 doesn't show full list of activities
I have installed a F19 on an old laptop with Nvidia G72M (Quadro NVS 110M/ Geforce Go 7300). Installed Gnome 3 but when I want to see all application instead of more frequent, nothing appears.I noticed also some artifacts on some windows. No problem when user starts LXDE instead of Gnome 3. Tnx -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F19: cannot choose desktop session
antonio montagnani ha scritto / said the followingil giorno/on 16/09/2013 14:10: After latest updates I cannot choose different installed desktops at login. I have to use mate, no GNOME, there is no option to choose. Using lightdm. Shall I file a bug? i understand that in lightdm choice is on the top bar on the right and not in the login screen where you can only choose users and passwords -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F19: cannot choose desktop session
After latest updates I cannot choose different installed desktops at login. I have to use mate, no GNOME, there is no option to choose. Using lightdm. Shall I file a bug? -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F19- Totem doesn't play a film to the end
I recorded a bike-ride with a Go-Pro action camera, then I downloaded the Mp4 to my laptop: Totem starts playing it fine but after 5 minutes stops playing. Same file is played fine by VLC. Format is Mp4 Any idea?? -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: R: F18 to F19: shutdown doesn't work in LXDE
Ed Greshko ha scritto / said the followingil giorno/on 13/07/2013 09:03:
On 07/13/13 15:01, antonio wrote:
Ed Greshko ha scritto / said the followingil giorno/on 13/07/2013 08:53:
On 07/13/13 13:52, antonio wrote:
poma ha scritto / said the followingil giorno/on 12/07/2013 23:03:
On 12.07.2013 11:12, antonio.montagn...@alice.it wrote:
https://bugzilla.redhat.com/show_bug.cgi?id=981738
here we are :-)
https://bugzilla.redhat.com/show_bug.cgi?id=800658
poma
should it be already fixed in F19??? ..that is fully updated
No, it is not fixed. I just verified that hitting "Shutdown" results in the
following AVC...
type=USER_AVC msg=audit(1373698327.629:499): pid=1 uid=0 auid=4294967295 ses=4294967295
subj=system_u:system_r:init_t:s0 msg='avc: denied { start } for auid=-1 uid=0 gid=0
path="/usr/lib/systemd/system/poweroff.target" scontext=system_u:system_r:consolekit_t:s0
tcontext=system_u:object_r:power_unit_file_t:s0 tclass=service
exe="/usr/lib/systemd/systemd" sauid=0 hostname=? addr=? terminal=?'
I'll add that note to the bugzilla.
do you mean that it is Selinux related?? because the bug has been reported
against lxsession
Yes. Comment 1 has been verified.
You may want to consider opening a new bugzilla against selinux-policy. It may
be fixed faster than waiting for the person assigned to transfer it to that
component/responsible person.
Bug's reporter should change component, I am not allowed to do it
--
Antonio M
Skype: amontag52
Linux Fedora F19(Schroedinger's cat) on Acer 5720
http://lugsaronno.altervista.org
http://www.campingmonterosa.com
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
F18 ti F19: can't create a Java virtual machine
We made un update to a laptop, fedup worked very well but now user when starts arduino gets a message (we can see it in a terminal) that can't create a Java virtual machine. Same Arduino worked fine in F18 Any idea??? -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F19: error in yum transaction
Reindl Harald ha scritto / said the followingil giorno/on 06/07/2013 21:39: Am 06.07.2013 21:31, schrieb antonio montagnani: Reindl Harald ha scritto / said the followingil giorno/on 06/07/2013 13:39: Am 06.07.2013 08:51, schrieb antonio montagnani: I get this message: RPM Scriptlet: dracut-install: ERROR: installing '/usr/lib/kbd/consolefonts/True.*' 08:49:39 : YUM: E: /usr/lib/dracut/dracut-install -D /var/tmp/initramfs.3dcDyn /usr/lib/kbd/consolefonts/True. what does it mean?? that the bug "FONT=true" in /etc/vconsole.conf hitted you or you have "=True" for "vconsole.font" in /etc/default/grub or /boot/grub2/grub.conf [root@srv-rhsoft:~]$ cat /etc/vconsole.conf FONT=latarcyrheb-sun16 KEYMAP=de-latin1-nodeadkeys cat /etc/vconsole.conf FONT=True KEYMAP=it and then??? then fix it? you see my output, you see yours, you see that "True" is wrong since you are in italy "de-latin1-nodeadkeys" fits perfectly I understand what you mean, I should change True in : /boot/grub2/grub.cfg /etc/sysconfig/i18n /etc/default/grub But I don't find /etc/sysconfig/i18n (it is missing) Why?? -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F19: error in yum transaction
Reindl Harald ha scritto / said the followingil giorno/on 06/07/2013 13:39: Am 06.07.2013 08:51, schrieb antonio montagnani: I get this message: RPM Scriptlet: dracut-install: ERROR: installing '/usr/lib/kbd/consolefonts/True.*' 08:49:39 : YUM: E: /usr/lib/dracut/dracut-install -D /var/tmp/initramfs.3dcDyn /usr/lib/kbd/consolefonts/True. what does it mean?? that the bug "FONT=true" in /etc/vconsole.conf hitted you or you have "=True" for "vconsole.font" in /etc/default/grub or /boot/grub2/grub.conf [root@srv-rhsoft:~]$ cat /etc/vconsole.conf FONT=latarcyrheb-sun16 KEYMAP=de-latin1-nodeadkeys cat /etc/vconsole.conf FONT=True KEYMAP=it and then??? Tnx for the reply -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F19: error in yum transaction
I get this message: RPM Scriptlet: dracut-install: ERROR: installing '/usr/lib/kbd/consolefonts/True.*' 08:49:39 : YUM: E: /usr/lib/dracut/dracut-install -D /var/tmp/initramfs.3dcDyn /usr/lib/kbd/consolefonts/True. what does it mean?? -- Antonio M Skype: amontag52 Linux Fedora F19(Schroedinger's cat) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: R: Re: F19: after upgrading I cant't login from gdm
Stephen Gallagher ha scritto / said the followingil giorno/on 03/07/2013 17:33: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 07/03/2013 10:27 AM, antonio montagnani wrote: Andre Robatino ha scritto / said the followingil giorno/on 03/07/2013 11:46: antonio.montagnani alice.it alice.it> writes: that means that I have to install also Xcfe and/or kde. Do you think that this could solve also the issue of Authentication failure when password is required inside a pop-window.Could I run Gnome in fallback mode as in F18?? You don't have to install a new desktop, just the display manager, which will let you log into any desktop. For example yum install lightdm system-switch-displaymanager system-switch-displaymanager lightdm and then to see the new DM, you can either reboot, or run "systemctl stop gdm" and "systemctl start lightdm" in a VT to get it without rebooting. now I can log in, still I have the Authentication failure on password request when Gnome is running... Log in as root on a virtual terminal (ctrl-alt-f2) and check /var/log/secure for errors and tell us what it says. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.13 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlHUREUACgkQeiVVYja6o6N5ywCeMXh7MDpQsjH777BIHZRhnD7+ yJ0Ani08sG9usJIr1xSxnaYZ6fx7r4mq =I+kI -END PGP SIGNATURE- part of final secure file when issuing root password in order to start yumex that is working fine in mate (it doesn't work either in gnome or gnome-classic Jul 3 17:48:52 PCdesktop polkitd[507]: Registered Authentication Agent for unix-session:4 (system bus name :1.188 [/usr/bin/gnome-shell --mode=classic], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale it_IT.UTF-8) Jul 3 17:51:16 PCdesktop polkitd[507]: Operator of unix-session:4 FAILED to authenticate to gain authorization for action dk.yumex.backend.pkexec.run for unix-process:4655:537976 [/usr/bin/python -tt /usr/bin/yumex] (owned by unix-user:antonio) Jul 3 17:51:16 PCdesktop pkexec[4661]: antonio: Error executing command as another user: Request dismissed [USER=root] [TTY=/dev/pts/0] [CWD=/home/antonio] [COMMAND=/usr/share/yumex/backend-launcher.py] -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: R: Re: F19: after upgrading I cant't login from gdm
Andre Robatino ha scritto / said the followingil giorno/on 03/07/2013 11:46: antonio.montagnani alice.it alice.it> writes: that means that I have to install also Xcfe and/or kde. Do you think that this could solve also the issue of Authentication failure when password is required inside a pop-window.Could I run Gnome in fallback mode as in F18?? You don't have to install a new desktop, just the display manager, which will let you log into any desktop. For example yum install lightdm system-switch-displaymanager system-switch-displaymanager lightdm and then to see the new DM, you can either reboot, or run "systemctl stop gdm" and "systemctl start lightdm" in a VT to get it without rebooting. now I can log in, still I have the Authentication failure on password request when Gnome is running... Tnx -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F19: after upgrading I cant't login from gdm
After fedup'ing I have a fully updated system but surprise I cannot login, after the password insertion of any user I get a blank screen with the fedora log on the bottom, and nothing happens. If I start from a console startx, it works fine. Furthermore if the screen saver starts, if a password is required i get an authentication failure, same for any application asking for root password (i.e.yumex) Running nouveau on a old FX5200 video card (but now Gnome 3 at least works, in F18 I was an fallback mode) -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: fedup f18->f19 going OK?
Stephen Gallagher ha scritto / said the followingil giorno/on 02/07/2013 15:03: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 07/02/2013 09:02 AM, Neal Becker wrote: I'm about to try fedup f18->f19. Any reports good/bad on this route? I'm mostly hearing good things at this point. A few people are reporting that the final reboot at the end sometimes hangs[1], but manually rebooting the system ends up in a workable state, so it's survivable. [1] https://bugzilla.redhat.com/show_bug.cgi?id=957783 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.13 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlHSz6EACgkQeiVVYja6o6N1kwCfeodraEGRCAfiY/crti8MOSNM H+oAn2vPJ2adKtylJ/OJ0Dap42JtA9cu =XUNr -END PGP SIGNATURE- no, my system (quite old system, a Pentium 4 about 8 yo) cannot work after fedup I hope that we can debug otherwise I have to try a fesh installation... First of all Gnome 3 works (I was running F18 in fallback mode) when I enter an user name and password nothing happens, I get a blank screen with fedora logo on the bottom and I have to issue a Ctrl+alt+f2 to enter as root or any other user, in text mode then with startx I am in graphics... If I start for example yumes as user I am requested the password, but I get authentication error!!! Systm is fully updated -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
UID instead of users name in a mounted samba share
This morning at office I was listing files in a terminal inside a samba share from my networked server and surprise folder was identified inside run/user/1000/gvfs instead of run/user/antonio/gvfs (of course antonio has UID 1000). Is it correct??? -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F18 - Connect to server doesn't show recent server list
antonio montagnani ha scritto / said the followingil giorno/on 30/06/2013 07:24: I have two F18 systems. 1) when I open Connect to server I see the list of recent connected server and I have also the Explore button 2) in a fresh installed system I don't have the server list and also explore button is missing Both system connect each other fine with smb or sftp. What am I missing?? the only difference is tha system 1 runs Gnome 3 while system 2 is running gnome in fallback mode due to a poor video card -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F18 - Connect to server doesn't show recent server list
I have two F18 systems. 1) when I open Connect to server I see the list of recent connected server and I have also the Explore button 2) in a fresh installed system I don't have the server list and also explore button is missing Both system connect each other fine with smb or sftp. What am I missing?? -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F18- Not able to share Printer
Made a fresh installation on a machine where a printer is connected. Printer is installed locally, but when I try to share it I cannot see it on the network, and if I use system-printer-setting no printer is seen on the network even if I write the correct IP (i.e. 192.168.1.2) Both machines ping each other. I cannot see it eeven if I stop firewalld. Any idea??? -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: firefox
Joachim Backes ha scritto / said the followingil giorno/on 29/06/2013 18:49: On 06/29/2013 06:28 PM, Patrick Dupre wrote: Hello, I am still experiencing toubles with firefox 22 when I browse some web sites. I was trying to downgrade to firefox 20, but I cannot find firefox-20.0-5.fc18.x86_64.rpm on http://koji.fedoraproject.org/koji/ (firefox-20.0-5.fc18.x86_64.rpm was not found on this server). Where can I get it? Thank. === Patrick DUPRÉ | | email: pdu...@gmx.com Laboratoire de Physico-Chimie de l'Atmosphère | | Université du Littoral-Côte d'Opale | | Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44 189A, avenue Maurice Schumann | | 59140 Dunkerque, France === http://koji.fedoraproject.org/koji/packageinfo?packageID=37 Kind regards I guess that operator has already got this link and the underlaying page where he gets the error when looking for the package -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Upgrading to 19 by fedup: bad and good news
Fred Smith ha scritto / said the followingil giorno/on 29/06/2013 17:59: On Sat, Jun 29, 2013 at 04:52:16PM +0200, antonio wrote: antonio montagnani ha scritto / said the followingil giorno/on 29/06/2013 15:39: antonio montagnani ha scritto / said the followingil giorno/on 29/06/2013 15:17: Today I issues a fedup-cli network 19 command ( At the end of procedure that ended right when rebooting I get Bad news: I get a black window if I login as any user with a fedora logo on the bottom of screen but I can use tty and then issue a startx Good news after issuing startx my old video card (Geforce FX5200) works fine with Gnome 3. Why do I have only F18 kernel?? Tnx more info: I have two users, when I issue startx with user A (that is coming from F18) I get the message oh no something went wrong, while a fresh user B can issue startx flawlessy. Also root can startx with no problem when the screensaver starts I get authorization failed, i.e. I have to hard reset the machine!!! Antonio: Right up front I'll say I have no idea about the various problems you report (apparently) from having used fedup. However, this last one, you almost certainly DO NOT need to reset the machine. If I read you right, it's stuck in the screensaver, you can't authenticate to get back to your login. If that's right, you can do one of at least a couple different things: 1. try CTRL-ALT-BKSP, which should kill your X session and return it to a login. Note that this only happens if that response to CTRL-ALT-BKSP hasn't been disabled by default. 2. switch to another VT, log in, kill the X session that's stuck. 3. probably a dozen other choices that don't come to mind right now. In my F19 system, CTRL-ALT-BKSP seems to be disabled by default. you can enable it in the gnome tweak tool. click "typing" and in the resulting list select "Key sequence to kill the X server", set it to "Control + Alt + Backspace. then the next time you have this kind of fail, just do the 3-finger-salute and voila. Fred tnx for the reply. I have decided to reinstall F18 from the net. The machine is connected to the home printer and scanner so it cannot stay out-of-service for a long time. I have the doubt that at this stage of release, my fedup-cli 19 network command may have got the wrong packages, (for example no F19 kernel, that is quite surprising) -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Upgrading to 19 by fedup: bad and good news
antonio montagnani ha scritto / said the followingil giorno/on 29/06/2013 15:17: Today I issues a fedup-cli network 19 command ( At the end of procedure that ended right when rebooting I get Bad news: I get a black window if I login as any user with a fedora logo on the bottom of screen but I can use tty and then issue a startx Good news after issuing startx my old video card (Geforce FX5200) works fine with Gnome 3. Why do I have only F18 kernel?? Tnx more info: I have two users, when I issue startx with user A (that is coming from F18) I get the message oh no something went wrong, while a fresh user B can issue startx flawlessy. Also root can startx with no problem -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Upgrading to 19 by fedup: bad and good news
Today I issues a fedup-cli network 19 command ( At the end of procedure that ended right when rebooting I get Bad news: I get a black window if I login as any user with a fedora logo on the bottom of screen but I can use tty and then issue a startx Good news after issuing startx my old video card (Geforce FX5200) works fine with Gnome 3. Why do I have only F18 kernel?? Tnx -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
F18: Gnome-user-share
Did anybody succeed to have Gnome-user-share working?? It was working on F17, now I cannot share any folder, actually I do not see any shared machine on Network. Any hint?? -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
R: Re: driver for a printer connected to a remote computer
The computer where the printer is connected is a F18 system, the other computers run on F18 or Ubuntu (that has the same behaviour) Antonio da Samsung MobileMark LaPierre ha scritto:On 03/31/2013 05:36 PM, antonio montagnani wrote: > A printer connected to a computer on my network is easily discovered but > driver is generally a Raw generic driver: therefore I cannot use part of > options (i.e. printing multiple pages on a single sheet and so on). > > If I want to have full functionality I have to install driver by hand > using system-config-printer. > > (I am using a Samsung ML-1610 laser printer) > > Is this behaviour normal?? > > Antonio > > Running Fedora F-18 (Spherical Cow) > On my home PcDesktop I suppose the first question would be: How is this printer that is connected to a computer on your network being shared by that computer? Is the machine that the printer is connected to also running F-18? -- _ °v° /(_)\ ^ ^ Mark LaPierre Registered Linux user No #267004 https://linuxcounter.net/ -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
R: Re: driver for a printer connected to a remote computer
On the computer where the printer is connected driver is installed fine, only on networked computer I have to install it by hand Antonio da Samsung MobileSuvayu Ali ha scritto:On Sun, Mar 31, 2013 at 11:36:23PM +0200, antonio montagnani wrote: > A printer connected to a computer on my network is easily discovered but > driver is generally a Raw generic driver: therefore I cannot use part of > options (i.e. printing multiple pages on a single sheet and so on). > > If I want to have full functionality I have to install driver by hand using > system-config-printer. > > (I am using a Samsung ML-1610 laser printer) > > Is this behaviour normal?? You need to install network printers too. This means you need to choose the appropriate drivers to get a complete functionality. Usually Fedora ships most printer drivers, if the driver for your printer is missing please try to file a bugzilla report. Hope this helps, -- Suvayu Open source is the future. It sets us free. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
driver for a printer connected to a remote computer
A printer connected to a computer on my network is easily discovered but driver is generally a Raw generic driver: therefore I cannot use part of options (i.e. printing multiple pages on a single sheet and so on). If I want to have full functionality I have to install driver by hand using system-config-printer. (I am using a Samsung ML-1610 laser printer) Is this behaviour normal?? Antonio Running Fedora F-18 (Spherical Cow) On my home PcDesktop -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: at boot-time echoed kernel is older that started kernel
Joachim Backes ha scritto / said the followingil giorno/on
17/02/2013 10:33:
On 02/17/2013 09:23 AM, antonio montagnani wrote:
It is not really important, but I realized that when I start the machine
with a kernel, the echoed line on the screen reports the previous kernel.
Any idea??
This is part of the grub configuration file where you can see that the
first menu entry reports a previous kernel in the echo line (but older
kernel seems o.k.):
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Fedora (3.7.8-202.fc18.i686.PAE)' --class fedora --class
gnu-linux --class gnu --class os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 --hint='hd0,msdos3'
5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo 'Caricamento Linux 3.7.7-201.fc18.i686.PAE...'
linux /vmlinuz-3.7.8-202.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8 rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
rhgb quiet
echo 'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.8-202.fc18.i686.PAE.img
}
menuentry 'Fedora' --class fedora --class gnu-linux --class gnu --class
os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 --hint='hd0,msdos3'
5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo'Caricamento Linux 3.7.7-201.fc18.i686.PAE...'
linux /vmlinuz-3.7.7-201.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8 rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
rhgb quiet
echo'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.7-201.fc18.i686.PAE.img
I reported this already in F16:
https://bugzilla.redhat.co/show_bug.cgi?id=732654
added myself to the bug :-) . It seems still open for F18
--
Antonio M
Skype: amontag52
Linux Fedora F18(Spherical Cow) on Acer 5720
http://lugsaronno.altervista.org
http://www.campingmonterosa.com
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
at boot-time echoed kernel is older that started kernel
It is not really important, but I realized that when I start the machine
with a kernel, the echoed line on the screen reports the previous kernel.
Any idea??
This is part of the grub configuration file where you can see that the
first menu entry reports a previous kernel in the echo line (but older
kernel seems o.k.):
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Fedora (3.7.8-202.fc18.i686.PAE)' --class fedora --class
gnu-linux --class gnu --class os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 --hint='hd0,msdos3'
5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo 'Caricamento Linux 3.7.7-201.fc18.i686.PAE...'
linux /vmlinuz-3.7.8-202.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8 rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
rhgb quiet
echo 'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.8-202.fc18.i686.PAE.img
}
menuentry 'Fedora' --class fedora --class gnu-linux --class gnu --class
os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3 --hint='hd0,msdos3'
5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo'Caricamento Linux 3.7.7-201.fc18.i686.PAE...'
linux /vmlinuz-3.7.7-201.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8 rd.md=0 rd.dm=0 rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
rhgb quiet
echo'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.7-201.fc18.i686.PAE.img
--
Antonio M
Skype: amontag52
Linux Fedora F18(Spherical Cow) on Acer 5720
http://lugsaronno.altervista.org
http://www.campingmonterosa.com
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
F18: what to to do when plymouth is not loading charge image at boot time
After updating my laptop from F17 to F18, at boot time I get a progression line at screen bottom instead of the standard charge image in the centre of the screen. Of course I have rhgb set in grub configuration file. What shall I check?? Please note that it was working in F16 and F17. -- Antonio M Skype: amontag52 Linux Fedora F18(Spherical Cow) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: F18 : echo is different from loaded kernel in grub
Kevin Martin ha scritto / said the followingil giorno/on 15/02/2013
16:30:
On 02/15/13 01:32, antonio montagnani wrote:
I updated to F18, after some time I realized that echoed kernel is older that
loaded kernel: why is grub like this??
__
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub2-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod lvm
insmod ext2
set root='lvm/vg_acer5720-lv_root'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint='lvm/vg_acer5720-lv_root'
422dbeae-9692-4677-bf2b-8e5c0e1aed0b
else
search --no-floppy --fs-uuid --set=root 422dbeae-9692-4677-bf2b-8e5c0e1aed0b
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=it_IT
insmod gettext
fi
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Fedora (3.7.6-201.fc18.i686.PAE)' --class fedora --class gnu-linux
--class gnu --class os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3
--hint='hd0,msdos3' 5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo 'Caricamento Linux 3.7.2-204.fc18.i686.PAE...'
linux/vmlinuz-3.7.6-201.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8
rd.md=0 rd.dm=0 SYSFONT=True rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
KEYTABLE=it rhgb quiet
echo 'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.6-201.fc18.i686.PAE.img
}
menuentry 'Fedora (3.7.5-201.fc18.i686.PAE)' --class fedora --class gnu-linux
--class gnu --class os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3
--hint='hd0,msdos3' 5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo 'Caricamento Linux 3.7.2-204.fc18.i686.PAE...'
linux/vmlinuz-3.7.5-201.fc18.i686.PAE
root=/dev/mapper/vg_acer5720-lv_root ro rd.lvm.lv=vg_acer5720/lv_root
LANG=it_IT.UTF-8
rd.md=0 rd.dm=0 SYSFONT=True rd.luks=0 rd.lvm.lv=vg_acer5720/lv_swap
KEYTABLE=it rhgb quiet
echo 'Caricamento ramdisk iniziale...'
initrd /initramfs-3.7.5-201.fc18.i686.PAE.img
}
menuentry 'Fedora (3.7.4-204.fc18.i686.PAE)' --class fedora --class gnu-linux
--class gnu --class os $menuentry_id_option
'gnulinux-simple-422dbeae-9692-4677-bf2b-8e5c0e1aed0b' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos3
--hint-efi=hd0,msdos3 --hint-baremetal=ahci0,msdos3
--hint='hd0,msdos3' 5d6db129-001a-4159-bc3c-7c368eecedaa
else
search --no-floppy --fs-uuid --set=root
5d6db129-001a-4159-bc3c-7c368eecedaa
fi
echo 'Caricamento Linux 3.7.2-204.fc18.i686.PA
