Re: [Users] so, what do you want next in oVirt?
Hi, I would like to see a more advanced type of Power-Saving Cluster policy, where an empty Host gets put into a sleep-mode, so that it draws as little power as possible and can be awoken by engine when VM's starts to use more resources. A typical scenario would be that all VM's are spread evenly over Hosts during day-time, when customers are actively using their VM's. But then during off-hours, VM's gets clumped up into maybe one or two Hosts, and the other Hosts can be put to sleep to save energy, and then woken up in the morning again. /Karli tis 2013-08-20 klockan 17:19 -0400 skrev Itamar Heim: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? below[1] I've listed my understanding of what already went in from previous survey requests (to various degrees of coverage). Thanks, Itamar [1] from the top 12 V Allow disk resize V Integrate Nagios/Zabbix monitoring - via a ui plugin V Highly Available engine - via hosted engine[2] V Open vSwitch integration - via neutron integration X Allow cloning VMs without template ? Enable hypervisor upgrade/updates through engine[3] V Allow engine on an oVirt hosted VM - via hosted engine[2] V Enable guest configuration (root password, SSH keys, network) via guest agent in engine - via cloud-init X Integrate v2v into engine ? Bond/extend ovirtmgmt with a second network for HA/increased bandwidth[4] X Integrate scheduling of snapshots and VM export for backups in engine[5] V Spice – support Google Chrome - via mime based launch Other items mentioned in previous survey which should be covered by now: - Fix timeout when adding local host during all-in-one configuration - Fix engine set-up when SELinux is disabled - Provide packages for el6 (CentOS, Red Hat Enterprise Linux) - Allow multiple VMs to be deployed from the same template at the same time - ISO domains on local/GlusterS - Show IP addresses in Virtual Machines-Network Interfaces - OpenStack Quantum support (now called Neutron) - noVNC support - Support spice.html5 and websocket proxy - Add other guest OSes to list - Port oVirt guest agent to Ubuntu[6] - SLA - Allow resource time-sharing - Spice - Mac client (via mime based launch) - Spice - port XPI plug-in to Windows (not sure this will happen, but mime based launch allows using firefox now) - Spice - client for Ubuntu/Debian (should be covered via mime based launch) [2] hosted engine is in active development, but not released yet. [3] host update is supported, but not for general yum update. [4] a lot of improvements were done in this space, but i'm not sure if they cover this exact use case [5] backup api is now being pushed to master, and orchestration of backups should probably happen via 3rd part backup vendors? [6] I'm not sure packaging exists yet, but ubuntu is covered for the basic functionality of the guest agent. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.semailto:karli.sjob...@adm.slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Host stuck in unresponsive state
Hi René, On 01.09.2013 19:55, René Koch wrote: I sometimes have (had) the same issues with all-in-one-setups, so I don't use local storage in all-in-one-setup anymore. thanks for the hint, I'll definitely give this a try if the problem persists. As of yet I found that completely disabling all blocking services helps stabilizing vdsmd-startup: [root@aio ~]# systemctl disable iscsid.service [root@aio ~]# systemctl disable multipathd.service So far vdsmd starts and runs without any issues. Thanks - Frank ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] so, what do you want next in oVirt?
Hi, On 09/02/2013 01:12 PM, Karli Sjöberg wrote: Hi, I would like to see a more advanced type of Power-Saving Cluster policy, where an empty Host gets put into a sleep-mode, so that it draws as little power as possible and can be awoken by engine when VM's starts to use more resources. A typical scenario would be that all VM's are spread evenly over Hosts during day-time, when customers are actively using their VM's. But then during off-hours, VM's gets clumped up into maybe one or two Hosts, and the other Hosts can be put to sleep to save energy, and then woken up in the morning again. I agree. Current power-saving policy doesn't do much other than consolidating VMs. Having a tunable based on which X/Y idle hosts in the cluster could be powered-off, where Y-X hosts are ON just for backup. I would love to see that in the coming days in oVirt. It would also benefit if there is some kind of power-metering that is flagged in the GUI. How much power each system is consuming and over-all cluster is consuming. This would be a real handy number to access power consumption of the systems. Regards, Deepthi /Karli tis 2013-08-20 klockan 17:19 -0400 skrev Itamar Heim: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? below[1] I've listed my understanding of what already went in from previous survey requests (to various degrees of coverage). Thanks, Itamar [1] from the top 12 V Allow disk resize V Integrate Nagios/Zabbix monitoring - via a ui plugin V Highly Available engine - via hosted engine[2] V Open vSwitch integration - via neutron integration X Allow cloning VMs without template ? Enable hypervisor upgrade/updates through engine[3] V Allow engine on an oVirt hosted VM - via hosted engine[2] V Enable guest configuration (root password, SSH keys, network) via guest agent in engine - via cloud-init X Integrate v2v into engine ? Bond/extend ovirtmgmt with a second network for HA/increased bandwidth[4] X Integrate scheduling of snapshots and VM export for backups in engine[5] V Spice – support Google Chrome - via mime based launch Other items mentioned in previous survey which should be covered by now: - Fix timeout when adding local host during all-in-one configuration - Fix engine set-up when SELinux is disabled - Provide packages for el6 (CentOS, Red Hat Enterprise Linux) - Allow multiple VMs to be deployed from the same template at the same time - ISO domains on local/GlusterS - Show IP addresses in Virtual Machines-Network Interfaces - OpenStack Quantum support (now called Neutron) - noVNC support - Support spice.html5 and websocket proxy - Add other guest OSes to list - Port oVirt guest agent to Ubuntu[6] - SLA - Allow resource time-sharing - Spice - Mac client (via mime based launch) - Spice - port XPI plug-in to Windows (not sure this will happen, but mime based launch allows using firefox now) - Spice - client for Ubuntu/Debian (should be covered via mime based launch) [2] hosted engine is in active development, but not released yet. [3] host update is supported, but not for general yum update. [4] a lot of improvements were done in this space, but i'm not sure if they cover this exact use case [5] backup api is now being pushed to master, and orchestration of backups should probably happen via 3rd part backup vendors? [6] I'm not sure packaging exists yet, but ubuntu is covered for the basic functionality of the guest agent. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Med Vänliga Hälsningar --- Karli Sjöberg Swedish University of Agricultural Sciences Box 7079 (Visiting Address Kronåsvägen 8) S-750 07 Uppsala, Sweden Phone: +46-(0)18-67 15 66 karli.sjob...@slu.se mailto:karli.sjob...@adm.slu.se ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt REST API
On Tue, 2013-08-27 at 19:04 +0300, Michael Pasternak wrote: Hi James, On 08/27/2013 06:45 PM, James Laska wrote: Greetings Michael, Thanks for your guidance earlier today on IRC regarding accessing the oVirt REST API using json. Can you direct me to examples, or documentation, on how to pass arguments via the REST API? I'm able to get basic queries working ... https://somehost.example.com/api/vms?search=name=foo you can use very same query you use in UI. However, more exhaustive documentation/examples would be very helpful. see https://somehost.example.com/api?rsdl Brilliant! Thanks, James signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] EL6 and gluster domain [was Re: oVirt Weekly Meeting Minutes -- 2013-08-28]
Hi. That is exactly what I was afraid of. I found a repo with a recent qemu and libvirt packages but after upgrading them I was always getting this message while trying to start a VM: Host does not comply with the cluster emulated machines. The Hosts emulated machines are UNKNOWN and the cluster is rhel6.4.0 This repo address is http://rnd.rajven.net/centos/6.4/os/x86_64/ so maybe there is a possibility to join forces as those packages are there only need some final polish I think. Maciek 2013/8/30 Gianluca Cecchi gianluca.cec...@gmail.com On Fri, Aug 30, 2013 at 9:03 AM, Ofer Schreiber wrote: (Sorry for the format, sent from my cell) I don't remember any work on that issue. I really wonder now whether the el6 build work fine. For sure it would be impossible to have the new feature Gluster Storage Domain in both plain el6 servers configured as ovirt nodes and in ovirt-node iso for EL6. I'm now following this blocker for 3.3 that is strictly connected with this problem https://bugzilla.redhat.com/show_bug.cgi?id=988299 Latest post I read is from yesterday: Hi. I was wondering if it is possible to include correct version of qemu into ovirt 3.3 repository as it is required for one of ovirt's main new features - Gluster Storage Domain. Is there any release plan for RHEL 6.5? It seems that it will be a long time for having this feature in CentOS (supported by ovirt as I understand). Maciek Tracker bug for libgfapi backport in RHEL 6.5, currently in QA (this means in the best scenario end of 2013... donna if usable on 6.4 though...): https://bugzilla.redhat.com/show_bug.cgi?id=848070 related thread I found on ovirt-devel list: https://lists.fedorahosted.org/pipermail/vdsm-devel/2013-August/002497.html Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] EL6 and gluster domain [was Re: oVirt Weekly Meeting Minutes -- 2013-08-28]
Has anyone tried compiling qemu from source with the -enable-gluster option? On Mon, Sep 2, 2013 at 8:31 PM, Maciej Malesa mmal...@gmail.com wrote: Hi. That is exactly what I was afraid of. I found a repo with a recent qemu and libvirt packages but after upgrading them I was always getting this message while trying to start a VM: Host does not comply with the cluster emulated machines. The Hosts emulated machines are UNKNOWN and the cluster is rhel6.4.0 This repo address is http://rnd.rajven.net/centos/6.4/os/x86_64/ so maybe there is a possibility to join forces as those packages are there only need some final polish I think. Maciek 2013/8/30 Gianluca Cecchi gianluca.cec...@gmail.com On Fri, Aug 30, 2013 at 9:03 AM, Ofer Schreiber wrote: (Sorry for the format, sent from my cell) I don't remember any work on that issue. I really wonder now whether the el6 build work fine. For sure it would be impossible to have the new feature Gluster Storage Domain in both plain el6 servers configured as ovirt nodes and in ovirt-node iso for EL6. I'm now following this blocker for 3.3 that is strictly connected with this problem https://bugzilla.redhat.com/show_bug.cgi?id=988299 Latest post I read is from yesterday: Hi. I was wondering if it is possible to include correct version of qemu into ovirt 3.3 repository as it is required for one of ovirt's main new features - Gluster Storage Domain. Is there any release plan for RHEL 6.5? It seems that it will be a long time for having this feature in CentOS (supported by ovirt as I understand). Maciek Tracker bug for libgfapi backport in RHEL 6.5, currently in QA (this means in the best scenario end of 2013... donna if usable on 6.4 though...): https://bugzilla.redhat.com/show_bug.cgi?id=848070 related thread I found on ovirt-devel list: https://lists.fedorahosted.org/pipermail/vdsm-devel/2013-August/002497.html Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt 3.4 roadmap (was: Re: so, what do you want next in oVirt?)
Hi everyone, On 08/20/2013 11:19 PM, Itamar Heim wrote: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? below[1] I've listed my understanding of what already went in from previous survey requests (to various degrees of coverage). Just to follow on from Itamar's request - I would sayt that this is also your opportunity, if there are things which you would like to see included in oVirt and are working on, then this is a great opportunity to ensure that it's on the radar for the next release or two. Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Cannot download some noarch when exec 'yum install ovirt-engine'
On 08/31/2013 01:32 PM, 陈良 wrote: Thanks for your help! I do not use any repo, I just get the guidiline from the website:http://www.ovirt.org/Download. And my host os is just install by the cd from download on the fedora govement website. how Can I solve this problems. 在 2013-08-30 23:57:13，Itamar Heim ih...@redhat.com 写道： On 08/30/2013 10:46 AM, 陈良 wrote: Hi, Everyone When I exec 'yum install ovirt-engine',there are some problems ,as below: Error Downloading Packages: ovirt-log-collector-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-log-collector-3.2.2-1.fc18.noarch: Downloaded package ovirt-log-collector-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-host-deploy-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-1.0.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-image-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-image-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. ovirt-image-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-java-1.0.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-host-deploy-java-1.0.2-1.fc18.noarch: Downloaded package ovirt-host-deploy-java-1.0.2-1.fc18.noarch, fr om ovirt-stable, but it was invalid. ovirt-iso-uploader-3.2.2-1.fc18.noarch: [Errno 256] No more mirrors to try. ovirt-iso-uploader-3.2.2-1.fc18.noarch: Downloaded package ovirt-iso-uploader-3.2.2-1.fc18.noarch, from ovirt-stable, but it was invalid. my host is fedora 18 Thanks what is your repo configuration / which installation guidelines are you following? thanks, Itamar ofer - thoughts on --^ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] EL6 and gluster domain [was Re: oVirt Weekly Meeting Minutes -- 2013-08-28]
On 09/02/2013 01:31 PM, Maciej Malesa wrote: Hi. That is exactly what I was afraid of. I found a repo with a recent qemu and libvirt packages but after upgrading them I was always getting this message while trying to start a VM: Host does not comply with the cluster emulated machines. The Hosts emulated machines are UNKNOWN and the cluster is rhel6.4.0 This repo address is http://rnd.rajven.net/centos/6.4/os/x86_64/ so maybe there is a possibility to join forces as those packages are there only need some final polish I think. Maciek 2013/8/30 Gianluca Cecchi gianluca.cec...@gmail.com mailto:gianluca.cec...@gmail.com On Fri, Aug 30, 2013 at 9:03 AM, Ofer Schreiber wrote: (Sorry for the format, sent from my cell) I don't remember any work on that issue. I really wonder now whether the el6 build work fine. For sure it would be impossible to have the new feature Gluster Storage Domain in both plain el6 servers configured as ovirt nodes and in ovirt-node iso for EL6. I'm now following this blocker for 3.3 that is strictly connected with this problem https://bugzilla.redhat.com/show_bug.cgi?id=988299 Latest post I read is from yesterday: Hi. I was wondering if it is possible to include correct version of qemu into ovirt 3.3 repository as it is required for one of ovirt's main new features - Gluster Storage Domain. Is there any release plan for RHEL 6.5? It seems that it will be a long time for having this feature in CentOS (supported by ovirt as I understand). Maciek Tracker bug for libgfapi backport in RHEL 6.5, currently in QA (this means in the best scenario end of 2013... donna if usable on 6.4 though...): https://bugzilla.redhat.com/show_bug.cgi?id=848070 related thread I found on ovirt-devel list: https://lists.fedorahosted.org/pipermail/vdsm-devel/2013-August/002497.html Gianluca ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users can you share what does 'virsh capabilities' or 'vdsClient -s 0 getVdsCaps' returns? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt 3.3 Release Go/No-Go meeting
BEGIN:VCALENDAR PRODID:Zimbra-Calendar-Provider VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem BEGIN:STANDARD DTSTART:16010101T02 TZOFFSETTO:+0200 TZOFFSETFROM:+0300 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=10;BYDAY=1SU TZNAME:IST END:STANDARD BEGIN:DAYLIGHT DTSTART:16010101T02 TZOFFSETTO:+0300 TZOFFSETFROM:+0200 RRULE:FREQ=YEARLY;WKST=MO;INTERVAL=1;BYMONTH=3;BYDAY=-1FR TZNAME:IDT END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT UID:e4bb4608-7bca-4ed5-a0a3-7abc6a64af7a SUMMARY:oVirt 3.3 Release Go/No-Go meeting LOCATION:#ovirt IRC channel @oftc ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:board@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:users@o virt.org ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE:mailto:engine- de...@ovirt.org ORGANIZER;CN=Ofer Schreiber:mailto:oschr...@redhat.com DTSTART;TZID=Asia/Jerusalem:20130903T16 DTEND;TZID=Asia/Jerusalem:20130903T163000 STATUS:CONFIRMED CLASS:PUBLIC X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY TRANSP:OPAQUE LAST-MODIFIED:20130902T140644Z DTSTAMP:20130902T140644Z SEQUENCE:0 DESCRIPTION:The following is a new meeting request:\n\nSubject: oVirt 3.3 Re lease Go/No-Go meeting \nOrganizer: Ofer Schreiber oschr...@redhat.com \ n\nLocation: #ovirt IRC channel @oftc \nTime: Tuesday\, September 3\, 2013\, 4:00:00 PM - 4:30:00 PM GMT +02:00 Jerusalem\n \nInvitees: bo...@ovirt.org\ ; users@ovirt.org\; engine-de...@ovirt.org \n\n\n*~*~*~*~*~*~*~*~*~*\n\noVir t 3.3 Release Go/No-Go meeting BEGIN:VALARM ACTION:DISPLAY TRIGGER;RELATED=START:-PT5M DESCRIPTION:Reminder END:VALARM END:VEVENT END:VCALENDAR___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] so, what do you want next in oVirt?
On 09/02/2013 05:07 PM, NOC wrote: On 08/20/2013 11:19 PM, Itamar Heim wrote: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? I'd like to see some way to ensure redundant groups of VMs are running on physically different hosts. E.g. if I have 2 or 3 dns servers running in a VM, I'd like to have them running on different hosts if they are available. I'd like these VMs to repel each other w.r.t. the physical running space. I imagine sometimes one could want the opposite as well, that two VM's that depend on each other over the network are running as close together as possible... (i.e. attract each other) I'm sure this is all scriptable, but it seems to fit with the management part of oVirt very well. while scriptable, its been made an api in 3.3 (which allows to easily extend the scheduler, until such features are incorporated into mainline codebase as out of the box): http://www.ovirt.org/Features/oVirt_scheduler http://www.ovirt.org/Features/oVirtSchedulerAPI its also going to be covered here tomorrow: http://lists.ovirt.org/pipermail/users/2013-August/015936.html (other than that - yes, above feature is positive/negative vm affinity for scheduling and should be on the list) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] so, what do you want next in oVirt?
On 08/20/2013 11:19 PM, Itamar Heim wrote: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? I'd like to see some way to ensure redundant groups of VMs are running on physically different hosts. E.g. if I have 2 or 3 dns servers running in a VM, I'd like to have them running on different hosts if they are available. I'd like these VMs to repel each other w.r.t. the physical running space. I imagine sometimes one could want the opposite as well, that two VM's that depend on each other over the network are running as close together as possible... (i.e. attract each other) I'm sure this is all scriptable, but it seems to fit with the management part of oVirt very well. Cheers Simon ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] so, what do you want next in oVirt?
On 08/21/2013 12:11 PM, Itamar Heim wrote: On 08/21/2013 02:40 AM, Joop van de Wege wrote: What I would like to see in the ! next version is pxe boot of the nodes. Probably not easy to achieve because of dependency on dhcp. Hi Joop, can you please give a bit more information on the use case / how you envision this? current thinking around bare metal provisioning of hosts is to extend the functionality around the foreman provider for this, but you may have other suggestions? I think Joop means to be able to add hosts (nodes) to a cluster by adding their MAC address to the dhcp list for PXE boot into ovirt-node and thus join the cluster. This would make it easy to add new physical nodes without any spinning disks or other local storage requirements. I suppose this may not be easy with complex network connections (bonds on mgmt network, mgmt network on a tagged vlan, etc), but it should be possible if the management network interface is plain and physical. /Simon PS, Perhaps Joop can confirm this idea, we've talked about it IRL. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] so, what do you want next in oVirt?
- Original Message - | From: Karli Sjöberg karli.sjob...@slu.se | To: Itamar Heim ih...@redhat.com | Cc: users@ovirt.org, Jan-Olov Persson jan-olov.pers...@slu.se | Sent: Monday, September 2, 2013 10:42:52 AM | Subject: Re: [Users] so, what do you want next in oVirt? | | Hi, | | I would like to see a more advanced type of Power-Saving Cluster policy, | where an empty Host gets put into a sleep-mode, so that it draws as little | power as possible and can be awoken by engine when VM's starts to use more | resources. | | A typical scenario would be that all VM's are spread evenly over Hosts during | day-time, when customers are actively using their VM's. But then during | off-hours, VM's gets clumped up into maybe one or two Hosts, and the other | Hosts can be put to sleep to save energy, and then woken up in the morning | again. | | /Karli | Hi Karli, this should be achievable for you in 3.3 with some minor work on your side; In oVirt 3.3 we introduce the new scheduler, which allows you to run your own code when doing VM placement and load balancing. You can write your own load balancing logic replacing the built-in one, which will switch to power saving at a given time. Once a host has no running VMs, your balance logic can switch it into S3 state (sleep), and when needed or in a given time use wake-on-lan to resume all suspended hosts. If you want we can guide you through it post 3.3 release. Doron | tis 2013-08-20 klockan 17:19 -0400 skrev Itamar Heim: | | | earlier in the year we did a survey for feature requests / improvements | / etc. | | since a lot of things were added, and priorities usually change, I'd | like to ask again for what do you need the most from oVirt / what are | your pain points next? | | below[1] I've listed my understanding of what already went in from | previous survey requests (to various degrees of coverage). | | Thanks, | Itamar | | [1] from the top 12 | V Allow disk resize | V Integrate Nagios/Zabbix monitoring - via a ui plugin | V Highly Available engine - via hosted engine[2] | V Open vSwitch integration - via neutron integration | X Allow cloning VMs without template | ? Enable hypervisor upgrade/updates through engine[3] | V Allow engine on an oVirt hosted VM - via hosted engine[2] | V Enable guest configuration (root password, SSH keys, network) via |guest agent in engine - via cloud-init | X Integrate v2v into engine | ? Bond/extend ovirtmgmt with a second network for HA/increased |bandwidth[4] | X Integrate scheduling of snapshots and VM export for backups in |engine[5] | V Spice – support Google Chrome - via mime based launch | | | Other items mentioned in previous survey which should be covered by now: | - Fix timeout when adding local host during all-in-one configuration | - Fix engine set-up when SELinux is disabled | - Provide packages for el6 (CentOS, Red Hat Enterprise Linux) | - Allow multiple VMs to be deployed from the same template at the same |time | - ISO domains on local/GlusterS | - Show IP addresses in Virtual Machines-Network Interfaces | - OpenStack Quantum support (now called Neutron) | - noVNC support | - Support spice.html5 and websocket proxy | - Add other guest OSes to list | - Port oVirt guest agent to Ubuntu[6] | - SLA - Allow resource time-sharing | - Spice - Mac client (via mime based launch) | - Spice - port XPI plug-in to Windows (not sure this will happen, but |mime based launch allows using firefox now) | - Spice - client for Ubuntu/Debian (should be covered via mime based |launch) | | | [2] hosted engine is in active development, but not released yet. | [3] host update is supported, but not for general yum update. | [4] a lot of improvements were done in this space, but i'm not sure if | they cover this exact use case | [5] backup api is now being pushed to master, and orchestration of | backups should probably happen via 3rd part backup vendors? | [6] I'm not sure packaging exists yet, but ubuntu is covered for the | basic functionality of the guest agent. | ___ | Users mailing list Users@ovirt.org | http://lists.ovirt.org/mailman/listinfo/users | | | -- | | Med Vänliga Hälsningar | --- | Karli Sjöberg | Swedish University of Agricultural Sciences | Box 7079 (Visiting Address Kronåsvägen 8) | S-750 07 Uppsala, Sweden | Phone: +46-(0)18-67 15 66 | karli.sjob...@slu.se | | ___ | Users mailing list | Users@ovirt.org | http://lists.ovirt.org/mailman/listinfo/users | ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Starting VM Error
Dan Kenigsberg wrote: On Sun, Sep 01, 2013 at 08:41:24PM +0200, Joop wrote: Shaun Glass wrote: Good Day All, I am running the latest version of oVirt for Fedora 18 (3.2.2) I have re-installed just in case but still get this error below : VM freenas is down. Exit message: internal error process exited while connecting to monitor: ((null):3390): Spice-Warning **: reds.c:3247:reds_init_ssl: Could not use private key file qemu-kvm: failed to initialize spice server . Got the same error on one of my hosts which I incidentally I just upgraded and before the upgrade it did work. On my other hosts which isn't upgraded yet I can still start VMs. The differences are minimal but either libvirt of qemu is probably having a problem. Reinstalling will give you the latest packages WITH the problem so that won't help. I'll try to add logs tomorrow. Please include qemu logs from /var/log/libvirt/qemu/vmname.log, and the qemu/libvirt versions on the working setup and the failing one. OK, here come the logs. Logs and packages might seem strange at first but don't worry to much about that. The *working* files are from a rather standard install of F18 and the *nonw* are from a F18 install which used to be a allinone but has been 'converted' to an engine/host, thats why it has a quite a few more packages. This worked until I did yum update! Can't go back because yum downgrade will go back to the base packages and there are requirements because of other packages and thus won't work. Regards, Joop 2013-09-02 15:12:02.988+: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=spice /usr/bin/qemu-kvm -name test06-puzzle-it-local -S -M pc-0.14 -cpu Nehalem,+vmx -enable-kvm -m 1024 -smp 2,sockets=1,cores=2,threads=1 -uuid a4d1cbed-3daa-4669-8f1d-3a6cdd4337a9 -smbios type=1,manufacturer=oVirt,product=oVirt Node,version=18-1,serial=dee2fbc8-b54c-46dc-87c1-fa2ea3784c1f,uuid=a4d1cbed-3daa-4669-8f1d-3a6cdd4337a9 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/test06-puzzle-it-local.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=2013-09-02T15:12:02,driftfix=slew -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive if=none,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/rhev/data-center/ccf85fab-6d36-4db9-bffd-e55b78bcf100/4897d9dc-f651-466d-bbe6-9f884892f77f/images/3b0de05b-3b7d-4664-8e6c-a11be5c5ee83/27eee563-2b6e-4663-99a8-4c420bed1068,if=none,id=drive-virtio-disk0,format=qcow2,serial=3b0de05b-3b7d-4664-8e6c-a11be5c5ee83,cache=none,werror=stop,rerror=stop,aio=threads -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 -netdev tap,fd=27,id=hostnet0,vhost=on,vhostfd=28 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a:a8:0b:f5,bus=pci.0,addr=0x3,bootindex=1 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/test06-puzzle-it-local.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/test06-puzzle-it-local.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0 -chardev spicevmc,id=charchannel2,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0 -spice port=5900,tls-port=5901,addr=0,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir -k en-us -vga qxl -global qxl-vga.vram_size=67108864 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 spice-server-0.12.2-3.fc18.x86_64 spice-vdagent-0.14.0-1.fc18.x86_64 ipxe-roms-qemu-20120328-2.gitaac9718.fc18.noarch libvirt-daemon-driver-qemu-0.10.2.4-1.fc18.x86_64 qemu-common-1.2.2-11.fc18.x86_64 qemu-img-1.2.2-11.fc18.x86_64 qemu-kvm-1.2.2-11.fc18.x86_64 qemu-kvm-tools-1.2.2-11.fc18.x86_64 qemu-system-x86-1.2.2-11.fc18.x86_64 libvirt-0.10.2.4-1.fc18.x86_64 libvirt-client-0.10.2.4-1.fc18.x86_64 libvirt-daemon-0.10.2.4-1.fc18.x86_64 libvirt-daemon-config-network-0.10.2.4-1.fc18.x86_64 libvirt-daemon-config-nwfilter-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-interface-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-libxl-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-lxc-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-network-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-nodedev-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-nwfilter-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-qemu-0.10.2.4-1.fc18.x86_64
Re: [Users] Starting VM Error
On Mon, Sep 02, 2013 at 03:41:41PM +0200, Joop wrote: Dan Kenigsberg wrote: On Sun, Sep 01, 2013 at 08:41:24PM +0200, Joop wrote: Shaun Glass wrote: Good Day All, I am running the latest version of oVirt for Fedora 18 (3.2.2) I have re-installed just in case but still get this error below : VM freenas is down. Exit message: internal error process exited while connecting to monitor: ((null):3390): Spice-Warning **: reds.c:3247:reds_init_ssl: Could not use private key file qemu-kvm: failed to initialize spice server . Got the same error on one of my hosts which I incidentally I just upgraded and before the upgrade it did work. On my other hosts which isn't upgraded yet I can still start VMs. The differences are minimal but either libvirt of qemu is probably having a problem. Reinstalling will give you the latest packages WITH the problem so that won't help. I'll try to add logs tomorrow. Please include qemu logs from /var/log/libvirt/qemu/vmname.log, and the qemu/libvirt versions on the working setup and the failing one. OK, here come the logs. Logs and packages might seem strange at first but don't worry to much about that. The *working* files are from a rather standard install of F18 and the *nonw* are from a F18 install which used to be a allinone but has been 'converted' to an engine/host, thats why it has a quite a few more packages. This worked until I did yum update! Can't go back because yum downgrade will go back to the base packages and there are requirements because of other packages and thus won't work. Regards, Joop 2013-09-02 15:12:02.988+: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin QEMU_AUDIO_DRV=spice /usr/bin/qemu-kvm -name test06-puzzle-it-local -S -M pc-0.14 -cpu Nehalem,+vmx -enable-kvm -m 1024 -smp 2,sockets=1,cores=2,threads=1 -uuid a4d1cbed-3daa-4669-8f1d-3a6cdd4337a9 -smbios type=1,manufacturer=oVirt,product=oVirt Node,version=18-1,serial=dee2fbc8-b54c-46dc-87c1-fa2ea3784c1f,uuid=a4d1cbed-3daa-4669-8f1d-3a6cdd4337a9 -no-user-config -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/test06-puzzle-it-local.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=2013-09-02T15:12:02,driftfix=slew -no-shutdown -device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 -device virtio-serial-pci,id=virtio-serial0,bus=pci.0,addr=0x4 -drive if=none,id=drive-ide0-1-0,readonly=on,format=raw,serial= -device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -drive file=/rhev/data-center/ccf85fab-6d36-4db9-bffd-e55b78bcf100/4897d9dc-f651-466d-bbe6-9 f884892f77f/images/3b0de05b-3b7d-4664-8e6c-a11be5c5ee83/27eee563-2b6e-4663-99a8-4c420bed1068,if=none,id=drive-virtio-disk0,format=qcow2,serial=3b0de05b-3b7d-4664-8e6c-a11be5c5ee83,cache=none,werror=stop,rerror=stop,aio=threads -device virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,id=virtio-disk0 -netdev tap,fd=27,id=hostnet0,vhost=on,vhostfd=28 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:1a:4a:a8:0b:f5,bus=pci.0,addr=0x3,bootindex=1 -chardev socket,id=charchannel0,path=/var/lib/libvirt/qemu/channels/test06-puzzle-it-local.com.redhat.rhevm.vdsm,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,id=channel0,name=com.redhat.rhevm.vdsm -chardev socket,id=charchannel1,path=/var/lib/libvirt/qemu/channels/test06-puzzle-it-local.org.qemu.guest_agent.0,server,nowait -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel1,id=channel1,name=org.qemu.guest_agent.0 -chardev spicevmc,id=charchannel2,name=vdagent -device virtserialport,bus=virtio-serial0.0,nr=3,chardev=charchannel2,id=channel2,name=com.redhat.spice.0 -spice port=5900,tls-port=5901,addr=0,x509-dir=/etc/pki/vdsm/libvirt-spice,tls-channel=main,tls-channel=display,tls-channel=inputs,tls-channel=cursor,tls-channel=playback,tls-channel=record,tls-channel=smartcard,tls-channel=usbredir -k en-us -vga qxl -global qxl-vga.vram_size=67108864 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x6 spice-server-0.12.2-3.fc18.x86_64 spice-vdagent-0.14.0-1.fc18.x86_64 ipxe-roms-qemu-20120328-2.gitaac9718.fc18.noarch libvirt-daemon-driver-qemu-0.10.2.4-1.fc18.x86_64 qemu-common-1.2.2-11.fc18.x86_64 qemu-img-1.2.2-11.fc18.x86_64 qemu-kvm-1.2.2-11.fc18.x86_64 qemu-kvm-tools-1.2.2-11.fc18.x86_64 qemu-system-x86-1.2.2-11.fc18.x86_64 libvirt-0.10.2.4-1.fc18.x86_64 libvirt-client-0.10.2.4-1.fc18.x86_64 libvirt-daemon-0.10.2.4-1.fc18.x86_64 libvirt-daemon-config-network-0.10.2.4-1.fc18.x86_64 libvirt-daemon-config-nwfilter-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-interface-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-libxl-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-lxc-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-network-0.10.2.4-1.fc18.x86_64 libvirt-daemon-driver-nodedev-0.10.2.4-1.fc18.x86_64
[Users] Setup 3.3 RC2 All-in-one fails
Hi, setting up a new installation of 3.3 RC2 fails: - installed Fedora 19 - setup ovirt repo, enable beta repo - install all-in-one rpms - run engine-setup [ INFO ] Stage: Setup validation --== CONFIGURATION PREVIEW ==-- Database name : engine Database secured connection: False Database host : localhost Database user name : engine Database host name validation : False Datbase port : 5432 NFS setup : True PKI organization : example.com NFS mount point: /home/ovirt/iso Application mode : both Host FQDN : aoi.example.com Datacenter storage type: nfs Configure local database : True Set application as default page: True Configure Apache SSL : True Configure VDSM on this host: True Local storage domain directory : /home/ovirt/vm [...skipping successful steps...] [ INFO ] Starting engine service [ INFO ] Restarting httpd [ ERROR ] Failed to execute stage 'Closing up': 'module' object has no attribute 'SSH' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20130902192543.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed And these are the relevant bits from install log: 2013-09-02 19:28:56 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:213 Creating the local data center 2013-09-02 19:28:56 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:223 Creating the local cluster into the local data center 2013-09-02 19:28:57 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:238 Adding the local host to the local cluster 2013-09-02 19:28:58 DEBUG otopi.context context._executeMethod:133 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 123, in _executeMethod method['method']() File /usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/all-in-one/vdsm.py, line 249, in _closeup ssh=self._ovirtsdk_xml.params.SSH( AttributeError: 'module' object has no attribute 'SSH' 2013-09-02 19:28:58 ERROR otopi.context context._executeMethod:142 Failed to execute stage 'Closing up': 'module' object has no attribute 'SSH' Seems like RC2 broke this I was able to successfully setup an all-on-one setup with RC1 before. Thanks - Frank ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Setup 3.3 RC2 All-in-one fails
- Original Message - From: Frank Wall f...@moov.de To: users@ovirt.org Sent: Monday, September 2, 2013 8:36:44 PM Subject: [Users] Setup 3.3 RC2 All-in-one fails Hi, setting up a new installation of 3.3 RC2 fails: - installed Fedora 19 - setup ovirt repo, enable beta repo - install all-in-one rpms - run engine-setup [ INFO ] Stage: Setup validation --== CONFIGURATION PREVIEW ==-- Database name : engine Database secured connection: False Database host : localhost Database user name : engine Database host name validation : False Datbase port : 5432 NFS setup : True PKI organization : example.com NFS mount point: /home/ovirt/iso Application mode : both Host FQDN : aoi.example.com Datacenter storage type: nfs Configure local database : True Set application as default page: True Configure Apache SSL : True Configure VDSM on this host: True Local storage domain directory : /home/ovirt/vm [...skipping successful steps...] [ INFO ] Starting engine service [ INFO ] Restarting httpd [ ERROR ] Failed to execute stage 'Closing up': 'module' object has no attribute 'SSH' [ INFO ] Stage: Clean up Log file is located at /var/log/ovirt-engine/setup/ovirt-engine-setup-20130902192543.log [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination [ ERROR ] Execution of setup failed And these are the relevant bits from install log: 2013-09-02 19:28:56 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:213 Creating the local data center 2013-09-02 19:28:56 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:223 Creating the local cluster into the local data center 2013-09-02 19:28:57 DEBUG otopi.plugins.ovirt_engine_setup.all-in-one.vdsm vdsm._closeup:238 Adding the local host to the local cluster 2013-09-02 19:28:58 DEBUG otopi.context context._executeMethod:133 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 123, in _executeMethod method['method']() File /usr/share/ovirt-engine/setup/bin/../plugins/ovirt-engine-setup/all-in-one/vdsm.py, line 249, in _closeup ssh=self._ovirtsdk_xml.params.SSH( AttributeError: 'module' object has no attribute 'SSH' 2013-09-02 19:28:58 ERROR otopi.context context._executeMethod:142 Failed to execute stage 'Closing up': 'module' object has no attribute 'SSH' Seems like RC2 broke this I was able to successfully setup an all-on-one setup with RC1 before. Yes[1], you probably need newer sdk. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1002749 Thanks - Frank ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.4 roadmap (was: Re: so, what do you want next in oVirt?)
Hi, I'm not sure if someone has already requested this, but it would be nice to deploy multiple vm's from the same template concurrently. Currently you need to wait until a VM is deployed before the template is unlocked to deploy the next. Vincent Dave Neary dne...@redhat.com wrote: Hi everyone, On 08/20/2013 11:19 PM, Itamar Heim wrote: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? below[1] I've listed my understanding of what already went in from previous survey requests (to various degrees of coverage). Just to follow on from Itamar's request - I would sayt that this is also your opportunity, if there are things which you would like to see included in oVirt and are working on, then this is a great opportunity to ensure that it's on the radar for the next release or two. Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Setup 3.3 RC2 All-in-one fails
On 02.09.2013 20:03, Alon Bar-Lev wrote: Yes[1], you probably need newer sdk. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1002749 Thanks for the pointer to BZ. I've cherry-picked a newer version from nightly repo (ovirt-engine-sdk-python-3.3.0.5-1.20130828.gitdbe6e62.fc19.noarch) and was able to successfully setup my all-in-one setup. Thanks - Frank ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Enabled SpamAssassin for mailing list filtering pre-moderation
Hi all, I have just set up SpamAssassin for Mailman for all ovirt.org mailing lists - I will be checking in regularly to make sure that this change does not cause dropping of legitimate emails. If you send an email to the list and it doesn't get there, please mail me personally at dneary @redhat.com to let me know, and we'll adjust the spam level appropriately. I have trained all the lists with a corpus of ham and spam, so hopefully this will significantly lessen the moderation load. Let me know if you notice anything out of the ordinary on *any* ovirt.org lists, please! Thanks, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] oVirt 3.4 roadmap (was: Re: so, what do you want next in oVirt?)
On 09/02/2013 09:09 PM, Vincent Van der Kussrn wrote: Hi, I'm not sure if someone has already requested this, but it would be nice to deploy multiple vm's from the same template concurrently. Currently you need to wait until a VM is deployed before the template is unlocked to deploy the next. actually, this should already be fixed in 3.3. /Vincent/ Dave Neary dne...@redhat.com wrote: Hi everyone, On 08/20/2013 11:19 PM, Itamar Heim wrote: earlier in the year we did a survey for feature requests / improvements / etc. since a lot of things were added, and priorities usually change, I'd like to ask again for what do you need the most from oVirt / what are your pain points next? below[1] I've listed my understanding of what already went in from previous survey requests (to various degrees of coverage). Just to follow on from Itamar's request - I would sayt that this is also your opportunity, if there are things which you would like to see included in oVirt and are working on, then this is a great opportunity to ensure that it's on the radar for the next release or two. Cheers, Dave. -- Dave Neary - Community Action and Impact Open Source and Standards, Red Hat - http://community.redhat.com Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] el6 gluster temporary setup?
On 09/01/2013 03:42 AM, Andrew Lau wrote: Hi, From what I've been reading there's going to be quite a while until el6 will be getting native gluster support, rhel 6.5? If we use gluster + nfs/posix to access it temporarily, what would our options be to migrate to native gluster when the patch comes along? Would it be possible to do a quick datacenter modification or do all the VMs need to be exported and imported again. there is no 'legit' way of doing this today. i think the data is identical, and hacking the db to change the storage domain type would work, but not sure. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
