Re: [ovirt-users] cannot connect to spice console with portaloVirt 3.4.1
It worked,The port was blocked by iptables 2014-05-13 13:53 GMT+08:00 Zhong Qiang xiaoqiang3...@gmail.com: In this same way I can connect to spice console before i've upgraded ovirt. I can download the .vv file,with the following content. [virt-viewer] type=spice host=ovirt.vdi.com port=5900 password=Fi2ah6jsr7e8 tls-port=5901 fullscreen=0 title=win7_x64_one:%d - 按 SHIFT+F12 释放光标 enable-smartcard=0 enable-usb-autoshare=1 delete-this-file=1 usb-filter=-1,-1,-1,-1,0 tls-ciphers=DEFAULT host-subject=O=vdi.com,CN=ovirt.vdi.com ca=-BEGIN CERTIFICATE-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\nQ+5VWhHE590NAx2xoAu0LG/FoEu2r3/z/JQ=\n-END CERTIFICATE-\n toggle-fullscreen=shift+f11 release-cursor=shift+f12 secure-attention=ctrl+alt+end secure-channels=main;inputs;cursor;playback;record;display;usbredir;smartcard 2014-05-13 12:50 GMT+08:00 Michal Skrivanek michal.skriva...@redhat.com: On 13 May 2014, at 05:13, Zhong Qiang xiaoqiang3...@gmail.com wrote: I installed virt-viewer-0.6 on win2008R2( http://virt-manager.org/download/sources/virt-viewer/virt-viewer-x64-0.6.0.msi),but it doesn't work. and got the same error messages. And how did you connect before you've upgraded ovirt? Can you download and open the .vv file manually? Thanks, michal Thanks, qiang 2014-05-12 18:30 GMT+08:00 Michal Skrivanek michal.skriva...@redhat.com : On May 12, 2014, at 12:04 , Zhong Qiang xiaoqiang3...@gmail.com wrote: since I upgraded from oVirt 3.4.0,I can't connect to spice console with userportal/adminportal.received this error: Unable to conect to the graphic server c:\DOCUME~1\it\LOCALS~1\Temp\console.vv Any help is greatly appreciated. Thank you Most likely you have an outdated and old virt-viewer… Thanks, michal ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster performance oVirt 3.4
| | Citējot Vijay Bellur vbel...@redhat.com : | On 05/11/2014 02:04 AM, Vadims Korsaks wrote: |HI! | |Created 2 node setup with oVirt 3.4 and | CentOS 6.5, for storage created |2 node replicated gluster (3.5) fs on same | hosts with oVirt. |mount looks like this: |127.0.0.1:/gluster01 on | | /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01 | type fuse.glusterfs | | (rw,default_permissions,allow_other,max_read=131072) | |when i making gluster test with dd, something | like |dd if=/dev/zero bs=1M count=2 | | of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka |i'm gettting speed ~ 110 MB/s, so this is | 1Gbps speed of ethernet adapter | |but with in VM created in oVirt speed is | lower than 20 MB/s | |why there is so huge difference? |how can improve VMs disks speed? | | | What are your gluster volume settings? Have you | applied the following | performance tunables in gluster's virt profile: | | eager-lock=enable | remote-dio=enable | | Regards, | Vijay | | setting were: | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | storage.owner-gid: 36 | storage.owner-uid: 36 | | | add your settings settings now it looks | | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | network.remote-dio: enable | cluster.eager-lock: enable | storage.owner-gid: 36 | storage.owner-uid: 36 | | | but this didn't affected performace in any big way | should hosts to be restarted? | glusterfs storage domain configuration GUI got Optimize for virt. store option which have to be enabled when configuring for virt store. Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain If the configuration is manual, you need to set the group to 'virt' as shown below #gluster volume set VOLNAME group virt This will enable below options on gluster volume : quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=on Can you please make sure group has set properly ? Also, invoke dd with oflag=direct option and check whether it helps .. --Humble ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] is there a complete feature list for respective os template in the OS list when make a new vm
On May 12, 2014, at 11:13 , Omer Frenkel ofren...@redhat.com wrote: - Original Message - From: Ricky Schneberger ri...@schneberger.se To: users@ovirt.org Sent: Friday, May 9, 2014 10:16:21 AM Subject: [ovirt-users] is there a complete feature list for respective os template in the OS list when make a new vm -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, When I will make a new Windows 2012 vm and choose OS-type 2012 I am unable to connect with spice to the vm,but if I change this to type 2008 R2 I can. Still I am not able to install spice-guest-tools to the vm as its not supported the installer told me. So what is the difference between these OS types in the selector? Is there a complete list (CPU features etc)to get where I can se the differences between the OS types? most per-guest-os configuration is found under /etc/ovirt-engine/osinfo.conf.d/ but i dont see a reason for spice to fail with one and not the other. Win2012 and Win8 have SPICE disabled in osinfo. Only VNC is allowed since there is/were no qxl drivers. regards - -- Ricky Schneberger -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.14 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iEYEARECAAYFAlNsgMUACgkQOap81biMC2O10gCfeh6U+Z6taWGOnFiLDZfNXN+H iIQAnjRfOd3SEFukIxRSqGQOW0OK4fj3 =2nk+ -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] is there a complete feature list for respective os template in the OS list when make a new vm
Am 12.05.2014 11:13, schrieb Omer Frenkel: most per-guest-os configuration is found under /etc/ovirt-engine/osinfo.conf.d/ This implies you can not find _all_ info there, where is the rest? ;) Thanks in advance -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
- Original Message - From: Ricardo Esteves ricardo.m.este...@gmail.com To: users@ovirt.org Sent: Friday, April 11, 2014 1:07:31 AM Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) Hi, I've put my host on maintenance, then i configured iscsi offload for my broadcom cards changing target's file's (192.168.12.2,3260 and 192.168.12.4,3260) in my node iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations are back to default. Can you share the changes you made? Thanks. -- Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)
Hello all, I was asked to post the following problem on this mailinglist. After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the instructions from http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions I went to http://localhost.localdomain:80/ovirt-engine as indicated and was redirected to a 404 page. The same happened when using https. During the installation, engine-setup will print out the following on my VM with 512MB RAM: [WARNING] Warning: Not enough memory is available on the host. Minimum requirement is 4096MB, and 16384MB is recommended. SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00 Internal CA FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47 Web access is enabled at: http://localhost.localdomain:80/ovirt-engine https://localhost.localdomain:443/ovirt-engine Please use the user admin and password specified in order to login into oVirt Engine The consequence of not having enough RAM for oVirt is that it will silently fail to start up, without apparent errors or warnings. In my view, the warning above should be rephrased as Not enough memory is available on the host, oVirt will refuse to start and colored red. The solution to this problem is to have at least 4GB of RAM, after which oVirt seems to start up fine (with only 1.2GB of RAM in use). kr, -- Steven ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] stateless is false, but state changes do not persist after a poweroff.
oVirt:3.4.1 Guest_OS: win7_x64 VMpool_Name:normal [oVirt shell (connected)]# list vms --query name=normal-8 --show-all id : 92d11bbd-61dd-49a2-a18a-aeed44f06bb6 name : normal-8 cluster-id : ecd1f4cd-a3f4-46ea-a2ad-dc604218d47a cpu-architecture : X86_64 cpu-topology-cores : 1 cpu-topology-sockets : 2 cpu_shares : 0 creation_time: 2014-05-09 14:25:04+08:00 delete_protected : False display-address : ovirt.vdi.com display-allow_override : False display-monitors : 1 display-port : 5900 display-secure_port : 5901 display-single_qxl_pci : False display-smartcard_enabled: False display-type : spice high_availability-enabled: False high_availability-priority : 0 host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6 memory : 1073741824 memory_policy-guaranteed : 536870912 migration_downtime : -1 origin : ovirt os-boot-dev : hd os-type : windows_7x64 placement_policy-affinity: migratable placement_policy-host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6 sso-methods-method-id: GUEST_AGENT start_time : 2014-05-13 15:40:20.855000+08:00 stateless: False status-state : up stop_time: 2014-05-13 15:40:02.807000+08:00 template-id : 3f72cea1-9b2f-4025-862a-8acd3010fcb1 type : desktop usb-enabled : False vmpool-id: f12de2e0-1b68-4f77-a428-a9a83a5ac458 *I create a file called vmuser1 and put it in the desktop on vm(normal-8:win7),then shut down and power on*. *This file disappeared* Thanks, qiang ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster performance oVirt 3.4
| | Citējot Vijay Bellur vbel...@redhat.com : | On 05/11/2014 02:04 AM, Vadims Korsaks wrote: |HI! | |Created 2 node setup with oVirt 3.4 and | CentOS 6.5, for storage created |2 node replicated gluster (3.5) fs on same | hosts with oVirt. |mount looks like this: |127.0.0.1:/gluster01 on | | /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01 | type fuse.glusterfs | | (rw,default_permissions,allow_other,max_read=131072) | |when i making gluster test with dd, something | like |dd if=/dev/zero bs=1M count=2 | | of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka |i'm gettting speed ~ 110 MB/s, so this is | 1Gbps speed of ethernet adapter | |but with in VM created in oVirt speed is | lower than 20 MB/s | |why there is so huge difference? |how can improve VMs disks speed? | | | What are your gluster volume settings? Have you | applied the following | performance tunables in gluster's virt profile: | | eager-lock=enable | remote-dio=enable | | Regards, | Vijay | | setting were: | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | storage.owner-gid: 36 | storage.owner-uid: 36 | | | add your settings settings now it looks | | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | network.remote-dio: enable | cluster.eager-lock: enable | storage.owner-gid: 36 | storage.owner-uid: 36 | | | but this didn't affected performace in any big way | should hosts to be restarted? | glusterfs storage domain configuration GUI got Optimize for virt. store option which have to be enabled when configuring for virt store. Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain If the configuration is manual, you need to set the group to 'virt' as shown below #gluster volume set VOLNAME group virt This will enable below options on gluster volume : quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=on Can you please make sure group has set properly ? Also, invoke dd with oflag=direct option and check whether it helps .. --Humble ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Fwd: question from facebook : i'm writing about ovirt in French magazine
Hi all i'm writing about ovirt in a French magazine ... What do you think i cań't Forget to speak about ? Ovirt VS Vsphere Why is ovirt better ? Thanks for help PC-CALL Liège - Neva Systems sprl Raphaël NEIJENS | Responsable technique Quai des ardennes 140 - 4031 Angleur ( Liège, Belgique ) tel : (+32) 4 277 93 38 - (+32) 476 217 188 raph...@pc-call.be Facebook | Twitter | www.pc-call.bewww.raphaelneijens.be___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)
Hello all, I was asked to post the following problem on this mailinglist. After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the instructions from http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions I went to http://localhost.localdomain:80/ovirt-engine as indicated and was redirected to a 404 page. The same happened when using https. During the installation, engine-setup will print out the following on my VM with 512MB RAM: [WARNING] Warning: Not enough memory is available on the host. Minimum requirement is 4096MB, and 16384MB is recommended. SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00 Internal CA FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47 Web access is enabled at: http://localhost.localdomain:80/ovirt-engine https://localhost.localdomain:443/ovirt-engine Please use the user admin and password specified in order to login into oVirt Engine The consequence of not having enough RAM for oVirt is that it will silently fail to start up, without apparent errors or warnings. In my view, the warning above should be rephrased as Not enough memory is available on the host, oVirt will refuse to start and colored red. The solution to this problem is to have at least 4GB of RAM, after which oVirt seems to start up fine (with only 1.2GB of RAM in use). kr, -- Steven ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
Il 13/05/2014 00:33, Bob Doolittle ha scritto: On 05/12/2014 06:21 PM, Dan Kenigsberg wrote: On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should have fixed the that problem. I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): vdsm-4.14.6-0.fc19.x86_64 Should stable be updated with vdsm-4.14.7? Can I workaround the problem by using a different repository? I even instrumented the code in /usr/lib64/python2.7/site-packages/vdsm/netinfo.py The device name (p3p1) being passed in is correct (I even tried setting the string directly), but the returned object is empty. If I start python by hand and run ethtool.get_interfaces_info(p3p1) it returns the correct data. So it seems as though the code is somehow environmentally sensitive. I'm not sure what it is about my environment that would cause issues here however, since presumably this is working for others... I'm afraid this has recently been tickled by a relase of python-ethtool to Fedora 19. What is my best workaround? I need to get going again ASAP. if it's a python-ethtool issue, try with yum downgrade python-ethtool if it works, add it to exclusion (in /etc/yum.conf add exclude=python-ethtool) until the issue is fixed. Dan, can we have a respin of VDSM once the issue is handled (if it has to be solved vdsm side)? If we haven't already a BZ, please open one and make it blocking 3.4.2 release, thanks! Thanks, Bob ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)
- Original Message - From: Steven Van Acker steven.vanac...@cs.kuleuven.be To: users@ovirt.org Sent: Tuesday, May 13, 2014 10:39:03 AM Subject: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution) Hello all, I was asked to post the following problem on this mailinglist. After installing a clean CentOS 6.5 with a clean oVirt 3.4, following the instructions from http://www.ovirt.org/Download#Red_Hat_Enterprise_Linux_6.2FCentOS_Installation_Instructions I went to http://localhost.localdomain:80/ovirt-engine as indicated and was redirected to a 404 page. The same happened when using https. During the installation, engine-setup will print out the following on my VM with 512MB RAM: [WARNING] Warning: Not enough memory is available on the host. Minimum requirement is 4096MB, and 16384MB is recommended. SSH fingerprint: 4B:DE:48:26:99:AA:C0:72:E3:C8:B5:64:5F:6E:6D:00 Internal CA FB:82:FE:14:35:3A:BE:1A:B1:E6:99:C2:DC:CD:6D:E0:44:64:0F:47 Web access is enabled at: http://localhost.localdomain:80/ovirt-engine https://localhost.localdomain:443/ovirt-engine Please use the user admin and password specified in order to login into oVirt Engine The consequence of not having enough RAM for oVirt is that it will silently fail to start up, without apparent errors or warnings. You mean, in the log? In my view, the warning above should be rephrased as Not enough memory is available on the host, oVirt will refuse to start and colored red. Did it 'refuse' to start, or simply failed to start? With what conditions exactly you want this error? What if the engine does manage to start (e.g. because you did some weird tweaking and managed to make it run in 256MB)? What if it later fails, after you add a few tens of hosts/VMs? I know I regularly use a 1GB VM for testing setup, never had problems. Generally, red stuff in setup is reserved to real errors - when something failed. The solution to this problem is to have at least 4GB of RAM, after which oVirt seems to start up fine (with only 1.2GB of RAM in use). How did you measure that? On my current test VM, I have: # ps aux | grep ovirt-engine ovirt10840 0.0 0.2 207952 2168 ?Ss 10:08 0:00 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-engine/ovirt-engine.py --redirect-output --systemd=notify start ovirt10879 0.8 52.4 2247040 534892 ? Sl 10:08 0:46 ovirt-engine -server -XX:+TieredCompilation -Xms1g -Xmx1g -XX:PermSize=256m -XX:MaxPermSize=256m -Djava.net.preferIPv4Stack=true -Dsun.rmi.dgc.client.gcInterval=360 -Dsun.rmi.dgc.server.gcInterval=360 -Djava.awt.headless=true -Djsse.enableSNIExtension=false -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath=/var/log/ovirt-engine/dump -Djava.util.logging.manager=org.jboss.logmanager -Dlogging.configuration=file:///var/tmp/ovirt-engine/config/ovirt-engine-logging.properties -Dorg.jboss.resolver.warning=true -Djboss.modules.system.pkgs=org.jboss.byteman -Djboss.modules.write-indexes=false -Djboss.server.default.config=ovirt-engine -Djboss.home.dir=/usr/share/jboss-as -Djboss.server.base.dir=/usr/share/ovirt-engine -Djboss.server.data.dir=/var/lib/ovirt-engine -Djboss.server.log.dir=/var/log/ovirt-engine -Djboss.server.config.dir=/var/tmp/ovirt-engine/config -Djboss.server.temp.dir=/var/tmp/ovirt-engine/tmp -D jboss.controller.temp.dir=/var/tmp/ovirt-engine/tmp -jar /usr/share/jboss-as/jboss-modules.jar -mp /var/tmp/ovirt-engine/modules/00-ovirt-engin -modules:/var/tmp/ovirt-engine/modules/01-jboss-as-modules -jaxpmodule javax.xml.jaxp-provider org.jboss.as.standalone -c ovirt-engine.xml ovirt10900 0.0 0.2 286084 2604 ?Ss 10:08 0:01 /usr/bin/python /usr/share/ovirt-engine/services/ovirt-websocket-proxy/ovirt-websocket-proxy.py --systemd=notify start root 12200 0.0 0.0 112636 964 pts/10 S+ 11:38 0:00 grep --color=auto ovirt-engine # free total used free sharedbuffers cached Mem: 1019660 936780 82880 0 5068 259496 -/+ buffers/cache: 672216 347444 Swap: 14749692 164328 14585364 So the engine uses 2.2GB of virtual memory, but only 530MB rss, and total system use is, without caches, 670MB. So it's likely that a 512MB VM will not be enough. Thanks for the report! -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
On 13/05/14 00:35, Bob Doolittle wrote: Also - is there a bugID for this new issue? The one I quoted is supposed to only affect non-existent device names. Why is this affecting valid device names as well, and only in the VDSM context? Antonio may correct me here, but I believe it's caused by vdsm using libnl-1.x and py-ethtool using libnl3. We've discovered an issue with this combination, where libnl-1.x is able to invalidate the netlink socket libnl3 gives py-ethtool; rendering py-ethtool useless. This issue is somewhat tracked in this bz: https://bugzilla.redhat.com/show_bug.cgi?id=1078312 This is actually quite a delicate issue, as I believe there are some fixes in vdsm, py-ethtool have some patches to improve the error handling (which should help vdsm too) and we're waiting for an official libnl3 update to tackle the socket handling better. I have hopes that once the libnl3 fixes gets out, much of this will be solved. David S. On 05/12/2014 06:21 PM, Dan Kenigsberg wrote: On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should have fixed the that problem. I even instrumented the code in /usr/lib64/python2.7/site-packages/vdsm/netinfo.py The device name (p3p1) being passed in is correct (I even tried setting the string directly), but the returned object is empty. If I start python by hand and run ethtool.get_interfaces_info(p3p1) it returns the correct data. So it seems as though the code is somehow environmentally sensitive. I'm not sure what it is about my environment that would cause issues here however, since presumably this is working for others... I'm afraid this has recently been tickled by a relase of python-ethtool to Fedora 19. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] How to install spice-xpi-2.8 on ubuntu12.04?
Hi Qiang, you should be able to rebuild debian spice-xpi package: https://packages.debian.org/source/spice-xpi That should give you working spice-xpi with least effort. David On Čt, 2014-05-08 at 13:22 +0800, Zhong Qiang wrote: when i complie spice-xpi-2.8 on ubuntu12.04 with firefox29,i receive this error: root@user:~/src/spice-xpi-2.8# make make all-recursive make[1]: Entering directory `/root/src/spice-xpi-2.8' Making all in SpiceXPI make[2]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI' Making all in src make[3]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI/src' Making all in plugin make[4]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin' GENnsISpicec.xpt make all-am make[5]: Entering directory `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin' CXXlibnsISpicec_la-controller.lo controller.cpp: In destructor 'SpiceController::~SpiceController()': controller.cpp:73:5: warning: format not a string literal and no format arguments [-Wformat-security] CXXlibnsISpicec_la-np_entry.lo CXXlibnsISpicec_la-npn_gate.lo CXXlibnsISpicec_la-npp_gate.lo CXXlibnsISpicec_la-nsScriptablePeer.lo In file included from nsScriptablePeer.cpp:54:0: /root/src/xulrunner-sdk/include/nsError.h:186:14: error: expected constructor, destructor, or type conversion before '(' token /root/src/xulrunner-sdk/include/nsError.h:188:14: error: expected constructor, destructor, or type conversion before '(' token make[5]: *** [libnsISpicec_la-nsScriptablePeer.lo] Error 1 make[5]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin' make[4]: *** [all] Error 2 make[4]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI/src/plugin' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/root/src/spice-xpi-2.8/SpiceXPI' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/src/spice-xpi-2.8' make: *** [all] Error 2 # Any help is greatly appreciated. Thank you ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] newbee questions
Am 13.05.2014 11:12, schrieb Dan Kenigsberg: If you are planning to run only a couple of VMs on a single laptop, going to basics and using qemu/libvirt directly, or gnome-boxes, would make sense. If you plan to manage a multitude of hosts, then the benefits of oVirt comes to play. In the long run, it would be a huge achievement to utilize ovirt even for little vm workloads, especially if you want to compete with vmware. I know one size never fits all but I guess ovirt could very well be improved for single host management as well. -- Mit freundlichen Grüßen / Regards Sven Kieske Systemadministrator Mittwald CM Service GmbH Co. KG Königsberger Straße 6 32339 Espelkamp T: +49-5772-293-100 F: +49-5772-293-333 https://www.mittwald.de Geschäftsführer: Robert Meyer St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] stateless is false, but state changes do not persist after a poweroff.
I've known that Virtual machines in a pool are stateless,meaning that data is not persistent across reboots. Virtual machines in a pool are started when taken by a user, and shut down when the user is finished. 2014-05-13 16:10 GMT+08:00 Zhong Qiang xiaoqiang3...@gmail.com: oVirt:3.4.1 Guest_OS: win7_x64 VMpool_Name:normal [oVirt shell (connected)]# list vms --query name=normal-8 --show-all id : 92d11bbd-61dd-49a2-a18a-aeed44f06bb6 name : normal-8 cluster-id : ecd1f4cd-a3f4-46ea-a2ad-dc604218d47a cpu-architecture : X86_64 cpu-topology-cores : 1 cpu-topology-sockets : 2 cpu_shares : 0 creation_time: 2014-05-09 14:25:04+08:00 delete_protected : False display-address : ovirt.vdi.com display-allow_override : False display-monitors : 1 display-port : 5900 display-secure_port : 5901 display-single_qxl_pci : False display-smartcard_enabled: False display-type : spice high_availability-enabled: False high_availability-priority : 0 host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6 memory : 1073741824 memory_policy-guaranteed : 536870912 migration_downtime : -1 origin : ovirt os-boot-dev : hd os-type : windows_7x64 placement_policy-affinity: migratable placement_policy-host-id : 867b2e10-45fe-4305-98af-b7aa6fddb2a6 sso-methods-method-id: GUEST_AGENT start_time : 2014-05-13 15:40:20.855000+08:00 stateless: False status-state : up stop_time: 2014-05-13 15:40:02.807000+08:00 template-id : 3f72cea1-9b2f-4025-862a-8acd3010fcb1 type : desktop usb-enabled : False vmpool-id: f12de2e0-1b68-4f77-a428-a9a83a5ac458 *I create a file called vmuser1 and put it in the desktop on vm(normal-8:win7),then shut down and power on*. *This file disappeared* Thanks, qiang ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
- Original Message - From: David Sommerseth dav...@redhat.com To: Bob Doolittle b...@doolittle.us.com, Dan Kenigsberg dan...@redhat.com, asegu...@redhat.com Cc: users users@ovirt.org Sent: Tuesday, May 13, 2014 10:59:47 AM Subject: Re: Failure during self-hosted deployment: exception configuring management bridge On 13/05/14 00:35, Bob Doolittle wrote: Also - is there a bugID for this new issue? The one I quoted is supposed to only affect non-existent device names. Why is this affecting valid device names as well, and only in the VDSM context? Antonio may correct me here, but I believe it's caused by vdsm using libnl-1.x and py-ethtool using libnl3. We've discovered an issue with this combination, where libnl-1.x is able to invalidate the netlink socket libnl3 gives py-ethtool; rendering py-ethtool useless. This issue is somewhat tracked in this bz: https://bugzilla.redhat.com/show_bug.cgi?id=1078312 This is actually quite a delicate issue, as I believe there are some fixes in vdsm, py-ethtool have some patches to improve the error handling (which should help vdsm too) and we're waiting for an official libnl3 update to tackle the socket handling better. I have hopes that once the libnl3 fixes gets out, much of this will be solved. In vdsm's ovirt-3.4 branch we have detection of ethtool's version and use the same libnl version, as seen in: http://gerrit.ovirt.org/gitweb?p=vdsm.git;a=blob_plain;f=lib/vdsm/netlink.py;hb=7e306159d5f10f67197d499daa282d3d4c1bef73 if _ethtool_uses_libnl3(): This looks to me like there might be a python-ethtool 0.9.2 bug for devices that do not get ipv6 autoconf addresses. I'll investigate. David S. On 05/12/2014 06:21 PM, Dan Kenigsberg wrote: On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should have fixed the that problem. I even instrumented the code in
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote: Il 13/05/2014 00:33, Bob Doolittle ha scritto: On 05/12/2014 06:21 PM, Dan Kenigsberg wrote: On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should have fixed the that problem. I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): vdsm-4.14.6-0.fc19.x86_64 Should stable be updated with vdsm-4.14.7? Can I workaround the problem by using a different repository? I even instrumented the code in /usr/lib64/python2.7/site-packages/vdsm/netinfo.py The device name (p3p1) being passed in is correct (I even tried setting the string directly), but the returned object is empty. If I start python by hand and run ethtool.get_interfaces_info(p3p1) it returns the correct data. So it seems as though the code is somehow environmentally sensitive. I'm not sure what it is about my environment that would cause issues here however, since presumably this is working for others... I'm afraid this has recently been tickled by a relase of python-ethtool to Fedora 19. What is my best workaround? I need to get going again ASAP. if it's a python-ethtool issue, try with yum downgrade python-ethtool if it works, add it to exclusion (in /etc/yum.conf add exclude=python-ethtool) until the issue is fixed. Dan, can we have a respin of VDSM once the issue is handled (if it has to be solved vdsm side)? If we haven't already a BZ, please open one and make it blocking 3.4.2 release, thanks! The bug has been solved in vdsm-4.14.7, and should have been in ovirt-3.4-stable as of the release of ovirt-3.4.1. Sandro, do you know why Bob reports that 4.14.6 is still there? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
Il 13/05/2014 11:50, Dan Kenigsberg ha scritto: On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote: Il 13/05/2014 00:33, Bob Doolittle ha scritto: On 05/12/2014 06:21 PM, Dan Kenigsberg wrote: On Mon, May 12, 2014 at 05:53:10PM -0400, Bob Doolittle wrote: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 Which version of Vdsm are you using? ovirt-3.4.1's vdsm-4.14.7 should have fixed the that problem. I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): vdsm-4.14.6-0.fc19.x86_64 Should stable be updated with vdsm-4.14.7? Can I workaround the problem by using a different repository? I even instrumented the code in /usr/lib64/python2.7/site-packages/vdsm/netinfo.py The device name (p3p1) being passed in is correct (I even tried setting the string directly), but the returned object is empty. If I start python by hand and run ethtool.get_interfaces_info(p3p1) it returns the correct data. So it seems as though the code is somehow environmentally sensitive. I'm not sure what it is about my environment that would cause issues here however, since presumably this is working for others... I'm afraid this has recently been tickled by a relase of python-ethtool to Fedora 19. What is my best workaround? I need to get going again ASAP. if it's a python-ethtool issue, try with yum downgrade python-ethtool if it works, add it to exclusion (in /etc/yum.conf add exclude=python-ethtool) until the issue is fixed. Dan, can we have a respin of VDSM once the issue is handled (if it has to be solved vdsm side)? If we haven't already a BZ, please open one and make it blocking 3.4.2 release, thanks! The bug has been solved in vdsm-4.14.7, and should have been in ovirt-3.4-stable as of the release of ovirt-3.4.1. Sandro, do you know why Bob reports that 4.14.6 is still there? ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: http://resources.ovirt.org/pub/ovirt-3.4/rpm Can you point me to the email where he says he has 4.14.6? That's the version we released with 3.4.0. Maybe he didn't follow installation
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
Il 12/05/2014 23:53, Bob Doolittle ha scritto: On 05/12/2014 02:49 PM, Bob Doolittle wrote: Hi, I'm trying to set up a fresh system on F19, using oVirt 3.4. Hi Bob, can you check you're using right repositories in order to get 3.4.1? See http://www.ovirt.org/OVirt_3.4.1_release_notes Thanks, When running hosted-engine --deploy, it fails during Configuring the management bridge. The ovirt-hosted-engine-setup log shows: 2014-05-12 13:59:35 INFO otopi.plugins.ovirt_hosted_engine_setup.network.bridge bridge._misc:196 Configuring the management bridge 2014-05-12 13:59:35 DEBUG otopi.context context._executeMethod:152 method exception Traceback (most recent call last): File /usr/lib/python2.7/site-packages/otopi/context.py, line 142, in _executeMethod method['method']() File /usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/network/bridge.py, line 201, in _misc ].s.getVdsCapabilities()['info']['nics'][nics] KeyError: 'info' 2014-05-12 13:59:35 ERROR otopi.context context._executeMethod:161 Failed to execute stage 'Misc configuration': 'info' The vdsm.log shows: Thread-14::DEBUG::2014-05-12 13:59:35,840::BindingXMLRPC::1067::vds::(wrapper) client [127.0.0.1]::call getCapabilities with () {} Thread-14::DEBUG::2014-05-12 13:59:35,875::utils::642::root::(execCmd) '/sbin/ip route show to 0.0.0.0/0 table all' (cwd None) Thread-14::DEBUG::2014-05-12 13:59:35,879::utils::662::root::(execCmd) SUCCESS: err = ''; rc = 0 Thread-14::ERROR::2014-05-12 13:59:35,882::BindingXMLRPC::1086::vds::(wrapper) unexpected error Traceback (most recent call last): File /usr/share/vdsm/BindingXMLRPC.py, line 1070, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/BindingXMLRPC.py, line 393, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1185, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 369, in get caps.update(netinfo.get()) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 566, in get d['nics'][dev.name] = _nicinfo(dev.name, paddr) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 516, in _nicinfo info = _devinfo(nic) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 536, in _devinfo ipv4addr, ipv4netmask, ipv6addrs = getIpInfo(dev) File /usr/lib64/python2.7/site-packages/vdsm/netinfo.py, line 317, in getIpInfo ipv6addrs = devInfo.get_ipv6_addresses() SystemError: error return without exception set I have two NICs - a wireless NIC which is disabled, and an ethernet NIC p3p1 which is statically configured via network-scripts. I've also attached the output of ip addr. I also notice some disturbing looking messages in the vdsm log during setupMultipath, including Panic: Error initializing IRS and then subsequent lvm-related errors during StorageRefresh. Those did not abort the deployment, however. What do those failures indicate? This looks a lot like a new manifestation of: https://bugzilla.redhat.com/show_bug.cgi?id=1057772 I even instrumented the code in /usr/lib64/python2.7/site-packages/vdsm/netinfo.py The device name (p3p1) being passed in is correct (I even tried setting the string directly), but the returned object is empty. If I start python by hand and run ethtool.get_interfaces_info(p3p1) it returns the correct data. So it seems as though the code is somehow environmentally sensitive. I'm not sure what it is about my environment that would cause issues here however, since presumably this is working for others... -Bob ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Snapshot removal
- Original Message - From: Dafna Ron d...@redhat.com To: users@ovirt.org Sent: Thursday, April 17, 2014 12:52:04 PM Subject: Re: [ovirt-users] Snapshot removal NFS is wipe_after_delete=true always. so delete of snapshot will merge the data to upper level image + zero in on the data which is why this is taking a long time. I double checked this and I was very much surprised by this finding! We need a bz right away, Dafna can file it? Thanks! -- Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Mirrors
Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) Thanks, Andrew ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
On Tue, May 13, 2014 at 12:03:28PM +0200, Sandro Bonazzola wrote: Il 13/05/2014 11:50, Dan Kenigsberg ha scritto: On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote: Il 13/05/2014 00:33, Bob Doolittle ha scritto: I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): vdsm-4.14.6-0.fc19.x86_64 Should stable be updated with vdsm-4.14.7? Can I workaround the problem by using a different repository? ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: http://resources.ovirt.org/pub/ovirt-3.4/rpm Can you point me to the email where he says he has 4.14.6? Look up ^^^ ;-) That's the version we released with 3.4.0. Maybe he didn't follow installation instructions here: http://www.ovirt.org/OVirt_3.4.1_release_notes Maybe. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) Thanks, Andrew ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
You'd have a good chance with AARNET http://mirror.aarnet.edu.au/ On Tue, May 13, 2014 at 10:41 PM, Eyal Edri ee...@redhat.com wrote: Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) Thanks, Andrew ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
I have reached out to a couple of Australian mirror sites to see if they will be interested. Peace, Brian - Original Message - From: Eyal Edri ee...@redhat.com To: Andrew Lau and...@andrewklau.com, David Caro Estevez dcaro...@redhat.com, Brian Proffitt bprof...@redhat.com Cc: users users@ovirt.org, infra in...@ovirt.org Sent: Tuesday, May 13, 2014 8:41:36 AM Subject: Re: [ovirt-users] oVirt Mirrors Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) Thanks, Andrew ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as dropping a static file at a well known place with one URL per line. Yum can do the heavy lifting of determining the fastest mirror. Additionally I'd really like some clear instructions of how to set up a mirror and get it published as public mirror. We should ensure we have GPG-signed packages though. IIRC someone was working on this. Anyone has more information about this? On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote: I have reached out to a couple of Australian mirror sites to see if they will be interested. Peace, Brian - Original Message - From: Eyal Edri ee...@redhat.com To: Andrew Lau and...@andrewklau.com, David Caro Estevez dcaro...@redhat.com, Brian Proffitt bprof...@redhat.com Cc: users users@ovirt.org, infra in...@ovirt.org Sent: Tuesday, May 13, 2014 8:41:36 AM Subject: Re: [ovirt-users] oVirt Mirrors Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
- Original Message - From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl To: Brian Proffitt bprof...@redhat.com Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra in...@ovirt.org, Andrew Lau and...@andrewklau.com Sent: Tuesday, May 13, 2014 4:28:30 PM Subject: Re: [ovirt-users] oVirt Mirrors Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as dropping a static file at a well known place with one URL per line. Yum can do the heavy lifting of determining the fastest mirror. Additionally I'd really like some clear instructions of how to set up a mirror and get it published as public mirror. We should ensure we have GPG-signed packages though. IIRC someone was working on this. Anyone has more information about this? yes. afaik ovirt 3.4.1 was already released with signed pkg. sandro/kiril ? On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote: I have reached out to a couple of Australian mirror sites to see if they will be interested. Peace, Brian - Original Message - From: Eyal Edri ee...@redhat.com To: Andrew Lau and...@andrewklau.com, David Caro Estevez dcaro...@redhat.com, Brian Proffitt bprof...@redhat.com Cc: users users@ovirt.org, infra in...@ovirt.org Sent: Tuesday, May 13, 2014 8:41:36 AM Subject: Re: [ovirt-users] oVirt Mirrors Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
That was one on my list... BKP - Original Message - From: Andrew Lau and...@andrewklau.com To: Eyal Edri ee...@redhat.com Cc: David Caro Estevez dcaro...@redhat.com, Brian Proffitt bprof...@redhat.com, users users@ovirt.org, infra in...@ovirt.org Sent: Tuesday, May 13, 2014 8:49:40 AM Subject: Re: [ovirt-users] oVirt Mirrors You'd have a good chance with AARNET http://mirror.aarnet.edu.au/ On Tue, May 13, 2014 at 10:41 PM, Eyal Edri ee...@redhat.com wrote: Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) Thanks, Andrew ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
Il 13/05/2014 15:31, Eyal Edri ha scritto: - Original Message - From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl To: Brian Proffitt bprof...@redhat.com Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra in...@ovirt.org, Andrew Lau and...@andrewklau.com Sent: Tuesday, May 13, 2014 4:28:30 PM Subject: Re: [ovirt-users] oVirt Mirrors Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as dropping a static file at a well known place with one URL per line. Yum can do the heavy lifting of determining the fastest mirror. Additionally I'd really like some clear instructions of how to set up a mirror and get it published as public mirror. We should ensure we have GPG-signed packages though. IIRC someone was working on this. Anyone has more information about this? yes. afaik ovirt 3.4.1 was already released with signed pkg. sandro/kiril ? Yes, 3.4.1 packages have been signed. GPG public key is delivered within ovirt-release34 rpm. About the mirrorlist, I think Ewoud is right, it should be only a matter of dropping a static text file with the list and change yum repo config for pointing to the mirror list. We'll handle it for next release. Ewoud, do you mind open a BZ on this and make it blocker for 3.4.2? On Tue, May 13, 2014 at 08:52:49AM -0400, Brian Proffitt wrote: I have reached out to a couple of Australian mirror sites to see if they will be interested. Peace, Brian - Original Message - From: Eyal Edri ee...@redhat.com To: Andrew Lau and...@andrewklau.com, David Caro Estevez dcaro...@redhat.com, Brian Proffitt bprof...@redhat.com Cc: users users@ovirt.org, infra in...@ovirt.org Sent: Tuesday, May 13, 2014 8:41:36 AM Subject: Re: [ovirt-users] oVirt Mirrors Hi, We have some mirrors up and running for a few universities, not sure any of them are in australia though. david/brian - any chance of contacting an australia university for another mirror? Eyal. - Original Message - From: Andrew Lau and...@andrewklau.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 3:13:44 PM Subject: [ovirt-users] oVirt Mirrors Hi, I was wondering if there were any plans on drumming up an oVirt mirror down in Australia. It takes me nearly a few hours just to grab all the required packages to spin up a new box. Alternatively, the mirror does not seem to support rsync. Is there a recommended way to sync? (w/o ISOs) -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster performance oVirt 3.4
Citējot Humble Devassy Chirammal humble.deva...@gmail.com : | | Citējot Vijay Bellur vbel...@redhat.com : | On 05/11/2014 02:04 AM, Vadims Korsaks wrote: |HI! | |Created 2 node setup with oVirt 3.4 and | CentOS 6.5, for storage created |2 node replicated gluster (3.5) fs on same | hosts with oVirt. |mount looks like this: |127.0.0.1:/gluster01 on | | /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01 | type fuse.glusterfs | | (rw,default_permissions,allow_other,max_read=131072) | |when i making gluster test with dd, something | like |dd if=/dev/zero bs=1M count=2 | | of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka |i'm gettting speed ~ 110 MB/s, so this is | 1Gbps speed of ethernet adapter | |but with in VM created in oVirt speed is | lower than 20 MB/s | |why there is so huge difference? |how can improve VMs disks speed? | | | What are your gluster volume settings? Have you | applied the following | performance tunables in gluster's virt profile: | | eager-lock=enable | remote-dio=enable | | Regards, | Vijay | | setting were: | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | storage.owner-gid: 36 | storage.owner-uid: 36 | | | add your settings settings now it looks | | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | network.remote-dio: enable | cluster.eager-lock: enable | storage.owner-gid: 36 | storage.owner-uid: 36 | | | but this didn't affected performace in any big way | should hosts to be restarted? | glusterfs storage domain configuration GUI got Optimize for virt. store option which have to be enabled when configuring for virt store. Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain If the configuration is manual, you need to set the group to 'virt' as shown below #gluster volume set VOLNAME group virt This will enable below options on gluster volume : quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=on Can you please make sure group has set properly ? Also, invoke dd with oflag=direct option and check whether it helps .. --Humble tnx a lot!! now it's much better - from VM i can get dd with ~ 60 MB/s this is still ~ x2 lower than from host, but x3 better than it was before :) BTW could not found GUI got Optimize for virt. store option in oVirt 3.5 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
On Thu, May 8, 2014 at 11:40 PM, Gianluca Cecchi gianluca.cec...@gmail.comwrote: On May 8, 2014 11:01 PM, Einav Cohen eco...@redhat.com wrote: Hi Lukas, we don't have Italian supported in oVirt. In order to have that, we need first to translate all relevant strings to Italian. We manage the ovirt-engine string translations in the 'oVirt' project in Zanata: https://translate.zanata.org/zanata/project/view/ovirt in order to contribute translations to this project, you need to become a translator - instructions can be found in the Translators section in the Zanata home page: https://translate.zanata.org/zanata/ Thanks, Einav I'm interested in helping with italian translation too. In the mean time I created an account on zanata using my FAS account and asked to join the Italian translators team. Gianluca Hello, today it seems I was given right to join the Italian translators' team on Zanata (I see myself as one of the team members). What is the next step? I'm following https://github.com/zanata/zanata-server/wiki/Opening-a-Translation-Project but I don't see a link to translate oVirt in Italian Is it responsibility of one of oVirt project maintainers to allow me to create an it branch? Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt Mirrors
On Tue, May 13, 2014 at 03:41:57PM +0200, Sandro Bonazzola wrote: Il 13/05/2014 15:31, Eyal Edri ha scritto: - Original Message - From: Ewoud Kohl van Wijngaarden ewoud+ov...@kohlvanwijngaarden.nl To: Brian Proffitt bprof...@redhat.com Cc: Eyal Edri ee...@redhat.com, users users@ovirt.org, infra in...@ovirt.org, Andrew Lau and...@andrewklau.com Sent: Tuesday, May 13, 2014 4:28:30 PM Subject: Re: [ovirt-users] oVirt Mirrors Would it be an idea to keep a mirrorlist file? AFAIK it's as simple as dropping a static file at a well known place with one URL per line. Yum can do the heavy lifting of determining the fastest mirror. Additionally I'd really like some clear instructions of how to set up a mirror and get it published as public mirror. We should ensure we have GPG-signed packages though. IIRC someone was working on this. Anyone has more information about this? yes. afaik ovirt 3.4.1 was already released with signed pkg. sandro/kiril ? Yes, 3.4.1 packages have been signed. GPG public key is delivered within ovirt-release34 rpm. About the mirrorlist, I think Ewoud is right, it should be only a matter of dropping a static text file with the list and change yum repo config for pointing to the mirror list. We'll handle it for next release. Ewoud, do you mind open a BZ on this and make it blocker for 3.4.2? I opened https://bugzilla.redhat.com/show_bug.cgi?id=1097307 for this. I did not see a relevant component to select though. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
- Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com Sent: Tuesday, May 13, 2014 10:03:51 AM On Thu, May 8, 2014 at 11:40 PM, Gianluca Cecchi gianluca.cec...@gmail.com wrote: On May 8, 2014 11:01 PM, Einav Cohen eco...@redhat.com wrote: Hi Lukas, we don't have Italian supported in oVirt. In order to have that, we need first to translate all relevant strings to Italian. We manage the ovirt-engine string translations in the 'oVirt' project in Zanata: https://translate.zanata.org/zanata/project/view/ovirt in order to contribute translations to this project, you need to become a translator - instructions can be found in the Translators section in the Zanata home page: https://translate.zanata.org/zanata/ Thanks, Einav I'm interested in helping with italian translation too. In the mean time I created an account on zanata using my FAS account and asked to join the Italian translators team. you need to request that from one of the maintainers of the oVirt Zanata project: http://i.imgur.com/K36FrPQ.png luckily for you, I am one of them :) Italian is now added. Gianluca Hello, today it seems I was given right to join the Italian translators' team on Zanata (I see myself as one of the team members). What is the next step? I'm following https://github.com/zanata/zanata-server/wiki/Opening-a-Translation-Project but I don't see a link to translate oVirt in Italian Is it responsibility of one of oVirt project maintainers to allow me to create an it branch? Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] update vm in a pool
Good morning, I am new user, and I would ask you an information. I have installed ovirt 3.4. I created a pool with 3 vm, too. I should add software to 3 vm how I must proceed? 1) I must delete the vm from pool, and than add the software and then recreate the pool? 2) or there are other solution? Thank you a lot. ng ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] My presentation and first question - RAM limit 64000MB
Hello Everybody My name is Fagner Patrício and i am new in the list, I am from Brazil and I am a network admin of a public institution of my state. I have a first question, a few months ago i installed a oVirt enviroment and so far so good, but last week we received a big data application with big RAM needs, about 96GB. So i created a virtual machine with this RAM configuration, but when a start, it report a error, that my limit o RAM per machine is between 1024MB and 64000MB. How can i change this limits? My oVirt is version 3.3 of compatibility. -- Fagner Patrício João Pessoa - PB Brasil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
On Tue, May 13, 2014 at 4:51 PM, Einav Cohen eco...@redhat.com wrote: luckily for you, I am one of them :) Italian is now added. ;-) ok, started with messages part... is it correct that I can translate only oVirt master branch (and rhevm ones)? Will it be automatically applied to 3.4 too? If I have a 3.4.1 environment can I then easily apply my translation over so that I can check with real application? Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] My presentation and first question - RAM limit 64000MB
On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio fagner.patri...@gmail.comwrote: Hello Everybody My name is Fagner Patrício and i am new in the list, I am from Brazil and I am a network admin of a public institution of my state. I have a first question, a few months ago i installed a oVirt enviroment and so far so good, but last week we received a big data application with big RAM needs, about 96GB. So i created a virtual machine with this RAM configuration, but when a start, it report a error, that my limit o RAM per machine is between 1024MB and 64000MB. How can i change this limits? My oVirt is version 3.3 of compatibility. Possibly stupid question: how much physical ram do you have on your oVirt Hypervisor? Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] My presentation and first question - RAM limit 64000MB
Hello Cecchi. I Have 192GB in my oVirt Hypervisor. 2014-05-13 12:57 GMT-03:00 Gianluca Cecchi gianluca.cec...@gmail.com: On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio fagner.patri...@gmail.com wrote: Hello Everybody My name is Fagner Patrício and i am new in the list, I am from Brazil and I am a network admin of a public institution of my state. I have a first question, a few months ago i installed a oVirt enviroment and so far so good, but last week we received a big data application with big RAM needs, about 96GB. So i created a virtual machine with this RAM configuration, but when a start, it report a error, that my limit o RAM per machine is between 1024MB and 64000MB. How can i change this limits? My oVirt is version 3.3 of compatibility. Possibly stupid question: how much physical ram do you have on your oVirt Hypervisor? Gianluca -- Fagner Patrício João Pessoa - PB Brasil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Failure during self-hosted deployment: exception configuring management bridge
I think I did in fact start with the wrong ovirt-release RPM, and consequently the wrong repos. I have started over as specified in the 3.4.1 release notes (fresh Fedora 19 install, yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm). Now I am encountering a different issue during the same step, but I'll start a new e-mail thread for clarity. Thanks, Bob On 05/13/2014 08:24 AM, Dan Kenigsberg wrote: On Tue, May 13, 2014 at 12:03:28PM +0200, Sandro Bonazzola wrote: Il 13/05/2014 11:50, Dan Kenigsberg ha scritto: On Tue, May 13, 2014 at 10:27:12AM +0200, Sandro Bonazzola wrote: Il 13/05/2014 00:33, Bob Doolittle ha scritto: I am using the vdsm from ovirt-stable (and ovirt-3.4-stable): vdsm-4.14.6-0.fc19.x86_64 Should stable be updated with vdsm-4.14.7? Can I workaround the problem by using a different repository? ovirt-3.4.1 deliver vdsm-4.14.8.1 not 4.14.7, you can check yourself here: http://resources.ovirt.org/pub/ovirt-3.4/rpm Can you point me to the email where he says he has 4.14.6? Look up ^^^ ;-) That's the version we released with 3.4.0. Maybe he didn't follow installation instructions here: http://www.ovirt.org/OVirt_3.4.1_release_notes Maybe. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] New problem with hosted-engine during Configuring the management bridge
Hi, I have started a new installation as specified in the 3.4.1 release notes (fresh Fedora 19 install, yum localinstall http://resources.ovirt.org/pub/yum-repo/ovirt-release34.rpm). This is failing in the step Configuring the management bridge. Based on the vdsm.log, it appears I am hitting: *Bug 988995* https://bugzilla.redhat.com/show_bug.cgi?id=988995 -vdsm multipath.py restarts mutipathd, cutting the branch vdsm sits on multipath -F is returning invalid keyword: getuid_callout and it appears that this is causing vdsm-tool to abort (although the command exit status is 0 and the bug report says that those are only harmless warnings). There is no workaround stated in that bug report. Help? -Bob ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)
On Tue, 13 May 2014, Sven Kieske wrote: Doesn't this make you wonder where the minimum requirements come from? If it runs with less than 1 GB RAM, why do the docs say you need 4 GB and recommend even 16 GB ? certainly a fair question ... There is also a statement in that setup script as to needed filesystem space which seems to have been simply 'pulled out of the air', rather than documented / explained Is it just a matter of scale(number of vms/hosts/DCs) ? What would make engine consume more RAM? Can you maybe lower the minimum requirements? Or isolate the recommendations to a flat file which is commented, and sourced by the script, so a person can discern the difference between 'hard' requirements, and simple 'recommendations' for a stated use case -- Russ herrold ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] AllInOne
Hi, I'm trying to install ovirt AllnOne, following these steps: Install FC19 yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm yum install yum-utils yum-config-manager --enable ovirt-3.4 yum-config-manager --enable fedora-virt-preview yum-config-manager --enable ovirt-epel yum install epel-release yum -y update yum -y install ovirt-engine engine-setup When asked Configure VDSM on this host?, I answered yes rpm -qa|grep vdsm vdsm-xmlrpc-4.14.6-0.fc19.noarch vdsm-python-zombiereaper-4.14.6-0.fc19.noarch vdsm-4.14.6-0.fc19.x86_64 vdsm-cli-4.14.6-0.fc19.noarch vdsm-python-4.14.6-0.fc19.x86_64 Now I can access to the Administration Portal, but cannot start the local Hots, allways get this message: Host's Compatibility Version doesn't match the Cluster's Compatibility Version. Host local_host is installed with VDSM version (Non interactive user) and cannot join cluster local_cluster which is compatible with VDSM versions [4.13, 4.14, 4.9, 4.11, 4.12, 4.10]. What can I do to fix it? Thanks -- Jose Ferradeira http://www.logicworks.pt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] My presentation and first question - RAM limit 64000MB
Il 13/mag/2014 18:15 Fagner Patricio fagner.patri...@gmail.com ha scritto: Hello Cecchi. I Have 192GB in my oVirt Hypervisor. 2014-05-13 12:57 GMT-03:00 Gianluca Cecchi gianluca.cec...@gmail.com: On Tue, May 13, 2014 at 5:07 PM, Fagner Patricio fagner.patri...@gmail.com wrote: Hello Everybody My name is Fagner Patrício and i am new in the list, I am from Brazil and I am a network admin of a public institution of my state. I have a first question, a few months ago i installed a oVirt enviroment and so far so good, but last week we received a big data application with big RAM needs, about 96GB. So i created a virtual machine with this RAM configuration, but when a start, it report a error, that my limit o RAM per machine is between 1024MB and 64000MB. How can i change this limits? My oVirt is version 3.3 of compatibility. Possibly stupid question: how much physical ram do you have on your oVirt Hypervisor? Gianluca -- Fagner Patrício João Pessoa - PB Brasil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Could it be that for some reason the guest is configured as 32bit? Because in that case the limit should be indeed 64gb if guest is supporting pae, otherwise probably 4gb. How did you configure your guest os? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
- Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com Sent: Tuesday, May 13, 2014 11:16:47 AM On Tue, May 13, 2014 at 4:51 PM, Einav Cohen eco...@redhat.com wrote: luckily for you, I am one of them :) Italian is now added. ;-) ok, started with messages part... is it correct that I can translate only oVirt master branch (and rhevm ones)? Will it be automatically applied to 3.4 too? every version in Zanata tracks the translation for a different ovirt-engine code-branch: the 'master' version in Zanata is tracking the translation for the 'master' branch in ovirt-engine's code repo. therefore the 'master' version should *always* be kept up-to-date with regards to translations. the 'ovirt-3.4' version in Zanata is tracking the translation for the 'ovirt- engine-3.4' branch. AFAIK, the ovirt-engine-3.4.1 code was already branched out of ovirt-engine-3.4, therefore we will need to create an 'ovirt-3.4.1' version in Zanata if we would like to track translations specifically for ovirt 3.4.1 (the 'ovirt-engine-3.4' code branch is now the baseline for ovirt-engine-3.4.2, AFAIK). we are typically not updating translations for versions that were already GA'd (3.4), therefore I recommend to concentrate at this point only on the 'master' version (which is currently tracking the ovirt-engine-3.5 translations, practically). once we will branch the ovirt-engine-3.5 code out of the 'master' code branch, I will create an 'ovirt-3.5' version in Zanata, to track the ovirt-engine-3.5 translations. the 'master' version will remain the translation tracker for the 'master' code branch [which would practically become the baseline for the next ovirt-engine planned release (ovirt-3.6?)]. from that point on, translations which we want to land in ovirt-3.5 will need to be updated in both the 'master' version and the 'ovirt-3.5' version in Zanata (very similar to code patches: once we branch out, if we want a certain piece of code to land in ovirt-3.5, we will need to fix it in 'master' as well as in the 'ovirt-engine-3.5' branch). If I have a 3.4.1 environment can I then easily apply my translation over so that I can check with real application? again, doing translations specifically for 3.4.1 is problematic, as I explained above; I recommend working on a 'master'-based environment. in order to apply your translations, a regular ovirt environment is not enough - you will need a development environment, since the GUI code needs to be re-compiled with the new locale to make that new locale available in the GUI. Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
OK, thanks for explaining. If a sentence is completely equal in English and Italian (eg ovirt engine), can I leave it blanck or must I fill it with something? In case of no translation for a sentence what would be behaviour during use with that localization: English will be automatically put in or an error shown to the user or what? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Hitachi hus110 and ovirt
Hi all I wonder if anyone has a working setup with a HDS device. Right now I am seeing a weird performance issue. With default multipath settings dd of zeros into the /dev/mapper lun shows at 0.2kbps while writing directly into a single path at /dev/sdb provides 900Mbps. I am using 10g iscsi with 4 ports on the HDS and dual port cnas on the hosts Thanks Dan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] italian language pack ?
- Original Message - From: Gianluca Cecchi gianluca.cec...@gmail.com Sent: Tuesday, May 13, 2014 12:57:25 PM OK, thanks for explaining. If a sentence is completely equal in English and Italian (eg ovirt engine), can I leave it blanck or must I fill it with something? you can leave it untranslated or copy-paste the English string into the Italian translation - the result should be the same (English string displayed in GUI). It is recommended to copy the translation rather than leaving it untranslated, since leaving it untranslated will affect the statistics of the translation completeness (i.e. even if the translation is actually 100% complete, it will not be shown as 100% if strings were left untranslated, even deliberately). if you will leave the translation blank but mark it as 'translated' (so statistics are not affected), there is a good chance that the GUI will simply display a blank text as the translation, rather than the English text, so need to be careful with that. In case of no translation for a sentence what would be behaviour during use with that localization: English will be automatically put in or an error shown to the user or what? missing translations will result in displaying the corresponding English string instead. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Video Acceleration
Does anyone know if 3D acceleration is available or will be available in ovirt? https://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_enabling_vm.html ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] getting 404 after fresh install of oVirt 3.4 on CentOS 6.5 (+ solution)
I've seen a similar problem (404 on webadmin) on my 4GB physical ovirt engine box, but it turned out to be the jboss timeout in deployment Relevant bz https://bugzilla.redhat.com/show_bug.cgi?format=multipleid=1078291 so it might have been that it wasn't a memory limit in the OP that caused failure, but the time it took jboss to deploy -John On Tue, May 13, 2014 at 12:31 PM, R P Herrold herr...@owlriver.com wrote: On Tue, 13 May 2014, Sven Kieske wrote: Doesn't this make you wonder where the minimum requirements come from? If it runs with less than 1 GB RAM, why do the docs say you need 4 GB and recommend even 16 GB ? certainly a fair question ... There is also a statement in that setup script as to needed filesystem space which seems to have been simply 'pulled out of the air', rather than documented / explained Is it just a matter of scale(number of vms/hosts/DCs) ? What would make engine consume more RAM? Can you maybe lower the minimum requirements? Or isolate the recommendations to a flat file which is commented, and sourced by the script, so a person can discern the difference between 'hard' requirements, and simple 'recommendations' for a stated use case -- Russ herrold ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Video Acceleration
- Original Message - From: Maurice James mja...@media-node.com To: users users@ovirt.org Sent: Tuesday, May 13, 2014 7:40:01 PM Subject: [ovirt-users] Video Acceleration Does anyone know if 3D acceleration is available or will be available in ovirt? It is not available but leveraging http://virgil3d.github.io/ it might be at some point in the future. https://www.vmware.com/support/ws5/doc/ws_vidsound_d3d_enabling_vm.html ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Unable to make Single Sign on working on Windows 7 Guest
Thanks Vinzenz for your reply, we have just installed 3.5 and is working.. seems the fix has finally corrected SSO issue for Windows guest. BRgds, F. On May 12, 2014, at 9:21 AM, Vinzenz Feenstra wrote: On 05/11/2014 11:59 PM, Felipe Herrera Martinez wrote: I haven't seen any fix on this. I would be more than interested to know the fix if any. I have posted a change in this regard to the ovirt engine frontend to send the login request always. This change was merged to the master branch of ovirt engine. (for ovirt 3.5) Additionally I made a second change to vdsm that it decides when to forward the login request when the guest agent is responsive. This change is currently still pending. I am sorry that I did not respond to you mail. I was rather immediately taking an action to having this addressed as this was the second time somebody mentions this limitation. Unfortunately there's no real quick fix at the moment where I am certain that it works. In theory it should be enough to have an uninstall application entry in the registry for the RHEV Agent, however this is not a good thing and therefore I went with a different solution to avoid such kind of problems in future. Thanks in advance, Felipe On May 11, 2014, at 11:15 PM, Itamar Heim wrote: On 04/29/2014 07:40 PM, Felipe Herrera Martinez wrote: On the case I'll be able to create an installer, what is the name of the Application need to be there, in order to ovirt detects that Ovirt Guest agent is installed? I have created an installer adding OvirtGuestService files and the Product Name to be shown, a part of the command line post installs.. I have tried with ovirt-guest-agent and Ovirt guest agent Names for the application installed on Windows 7 guest and even both are presented on ovirt VM Applications tab, on any case LogonVDScommand appears. There is other option to make it work now? Thanks in advance, Felipe ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users i didn't see a reply to this. I think the validation for guest agent to be installed was removed recently though. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] My presentation and first question - RAM limit 64000MB
On 05/13/2014 11:07 AM, Fagner Patricio wrote: Hello Everybody My name is Fagner Patrício and i am new in the list, I am from Brazil and I am a network admin of a public institution of my state. I have a first question, a few months ago i installed a oVirt enviroment and so far so good, but last week we received a big data application with big RAM needs, about 96GB. So i created a virtual machine with this RAM configuration, but when a start, it report a error, that my limit o RAM per machine is between 1024MB and 64000MB. How can i change this limits? My oVirt is version 3.3 of compatibility. -- Fagner Patrício João Pessoa - PB Brasil ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users which version of 3.3? this should have been fixed in 3.3.2 http://www.ovirt.org/OVirt_3.3.2_release_notes BZ 1014952 - [admin portal] cannot add Windows VM with 512MB memory, or more than 64GB ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] AllInOne
On 05/13/2014 12:38 PM, supo...@logicworks.pt wrote: Hi, I'm trying to install ovirt AllnOne, following these steps: Install FC19 yum localinstall http://resources.ovirt.org/releases/ovirt-release.noarch.rpm yum install yum-utils yum-config-manager --enable ovirt-3.4 yum-config-manager --enable fedora-virt-preview yum-config-manager --enable ovirt-epel yum install epel-release yum -y update yum -y install ovirt-engine engine-setup When asked Configure VDSM on this host?, I answered yes rpm -qa|grep vdsm vdsm-xmlrpc-4.14.6-0.fc19.noarch vdsm-python-zombiereaper-4.14.6-0.fc19.noarch vdsm-4.14.6-0.fc19.x86_64 vdsm-cli-4.14.6-0.fc19.noarch vdsm-python-4.14.6-0.fc19.x86_64 Now I can access to the Administration Portal, but cannot start the local Hots, allways get this message: Host's Compatibility Version doesn't match the Cluster's Compatibility Version. Host local_host is installed with VDSM version (Non interactive user) and cannot join cluster local_cluster which is compatible with VDSM versions [4.13, 4.14, 4.9, 4.11, 4.12, 4.10]. What can I do to fix it? Thanks -- Jose Ferradeira http://www.logicworks.pt ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users anything in engine log? (similar log error in this bug:) Bug 1052314 - [RHEVM] cannot put 3.3 host into maintenance after failed addition to 3.4 cluster ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] update vm in a pool
On 05/13/2014 11:00 AM, nicola gentile wrote: Good morning, I am new user, and I would ask you an information. I have installed ovirt 3.4. I created a pool with 3 vm, too. I should add software to 3 vm how I must proceed? 1) I must delete the vm from pool, and than add the software and then recreate the pool? 2) or there are other solution? Thank you a lot. ng ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users do you want to use the VMs as stateless or statefull? did you use the pool to assign a single vm per user from user portal, or just to create a bunch of similar VMs? 3.4 has template versions, so you can create a new version of the template, and next time you shutdown/start the VMs, they will rebase to latest version of the template if pool is so defined. you can also install the application on the VM after you start it as an admin (which doesn't create the stateless snapshot by default like when a user starts the pool'd vm from the user portal). ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
In attachment follows the defaults and the modified versions of the nodes files. -Original Message- From: Federico Simoncelli [mailto:fsimo...@redhat.com] Sent: terça-feira, 13 de Maio de 2014 08:58 To: Ricardo Esteves Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) - Original Message - From: Ricardo Esteves ricardo.m.este...@gmail.com To: users@ovirt.org Sent: Friday, April 11, 2014 1:07:31 AM Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) Hi, I've put my host on maintenance, then i configured iscsi offload for my broadcom cards changing target's file's (192.168.12.2,3260 and 192.168.12.4,3260) in my node iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations are back to default. Can you share the changes you made? Thanks. -- Federico iscsi_nodes_default.tar.bz2 Description: Binary data iscsi_nodes_modified.tar.bz2 Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] newbee questions
On 05/13/2014 05:22 AM, Sven Kieske wrote: Am 13.05.2014 11:12, schrieb Dan Kenigsberg: If you are planning to run only a couple of VMs on a single laptop, going to basics and using qemu/libvirt directly, or gnome-boxes, would make sense. If you plan to manage a multitude of hosts, then the benefits of oVirt comes to play. In the long run, it would be a huge achievement to utilize ovirt even for little vm workloads, especially if you want to compete with vmware. I know one size never fits all but I guess ovirt could very well be improved for single host management as well. single host management is not the same as roaming laptop with wireless... all-in-one and hosted engine should provide a decent solution for single host management - what are the gaps? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
In attachment follows the defaults and the modified versions of the nodes files. -Original Message- From: Federico Simoncelli [mailto:fsimo...@redhat.com] Sent: terça-feira, 13 de Maio de 2014 08:58 To: Ricardo Esteves Cc: users@ovirt.org Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) - Original Message - From: Ricardo Esteves ricardo.m.este...@gmail.com To: users@ovirt.org Sent: Friday, April 11, 2014 1:07:31 AM Subject: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i) Hi, I've put my host on maintenance, then i configured iscsi offload for my broadcom cards changing target's file's (192.168.12.2,3260 and 192.168.12.4,3260) in my node iqn.1986-03.com.hp:storage.msa2324i.1226151a6 to use interface bnx2i.d8:d3:85:67:e3:bb, but after activating the host, configurations are back to default. Can you share the changes you made? Thanks. -- Federico iscsi_nodes_default.tar.bz2 Description: Binary data iscsi_nodes_modified.tar.bz2 Description: Binary data ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Cluster emulation mode issue
On 05/13/2014 08:46 PM, Doug Bishop wrote: Hope someone can help. I have been fighting this for the past day or so. I have a fresh install of ovirt-engine 3.4 all is working except when I try and add a newly provisioned host with Centos 6.5. I get the following: Custom Event ID: -1, Message: Host ovirt-vmtest does not comply with the cluster Default emulated machines. The Hosts emulated machines are rhel6.4.0,pc,rhel6.3.0,rhel6.2.0,rhel6.1.0,rhel6.0.0,rhel5.5.0,rhel5.4.4,rhel5.4.0 and the cluster is [rhel6.5.0, pc-1.0, pseries]} The above error shows up right after the machine is finished installing. Im sure there is something simple I am missing but at the moment I have no idea. Attached is my host-deploy log. For those that can help thanks again! Doug Bishop Sr. Systems Engineer dbis...@controlscan.com Controlscan, Inc. 11475 Great Oaks Way, Suite 300 Alpharetta, GA 30022 www.controlscan.com NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) or entity and may contain sensitive information that is confidential, proprietary, privileged or otherwise protected by law. Any unauthorized review, use, disclosure, distribution, copying or other use of, or taking of any action in reliance upon, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this message. This e-mail is and any response to it will be unencrypted and, therefore, potentially unsecure. The recipient should check this email and any attachments for the presence of viruses/malware according to security best practices. Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users that is very strange. what does running 'qemu-kvm -M ?' shows? (and just to make sure, running 'qemu-kvm-rhev -M ?' as well) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Cluster emulation mode issue
Here ya go : [root@ovirt-vmtest ~]# /usr/libexec/qemu-kvm -M ? Supported machines are: pc RHEL 6.4.0 PC (alias of rhel6.4.0) rhel6.4.0 RHEL 6.4.0 PC (default) rhel6.3.0 RHEL 6.3.0 PC rhel6.2.0 RHEL 6.2.0 PC rhel6.1.0 RHEL 6.1.0 PC rhel6.0.0 RHEL 6.0.0 PC rhel5.5.0 RHEL 5.5.0 PC rhel5.4.4 RHEL 5.4.4 PC rhel5.4.0 RHEL 5.4.0 PC qemu-kvm-rhev -M ? isn’t working The package is installed but the binary isn’t on the machine anywhere. Doug Bishop Sr. Systems Engineer ControlScan, Inc. Phone: tel://Phone:%20678-279-2659 678-848-6658 Fax: 1-800-825-2207tel://Fax:%201-800-825-2207 dbis...@controlscan.comhttp://mailto:dbis...@controlscan.com www.ControlScan.comhttp://www.controlscan.com/ Follow ControlScan: [cid:32D897E8-DA68-4BAE-8295-04CD1B9C4173] https://www.facebook.com/ControlScan [cid:C4DDA60C-7948-4B2D-96A7-E22979FBA8F7] http://twitter.com/ControlScan [cid:090C41F2-3F31-4EC1-BF48-E334D38A2DD8] http://www.linkedin.com/groups?about=gid=2181227trk=anet_ug_grppr [cid:9FCE4B8D-1225-4A2D-AC6A-94852AA9ED98] http://google.com/+Controlscan [cid:A6CC9822-5370-40C1-B667-522DE25B933C] http://www.pcicomplianceguide.org/ On May 13, 2014 at 8:55:28 PM, Itamar Heim (ih...@redhat.commailto:ih...@redhat.com) wrote: On 05/13/2014 08:46 PM, Doug Bishop wrote: Hope someone can help. I have been fighting this for the past day or so. I have a fresh install of ovirt-engine 3.4 all is working except when I try and add a newly provisioned host with Centos 6.5. I get the following: Custom Event ID: -1, Message: Host ovirt-vmtest does not comply with the cluster Default emulated machines. The Hosts emulated machines are rhel6.4.0,pc,rhel6.3.0,rhel6.2.0,rhel6.1.0,rhel6.0.0,rhel5.5.0,rhel5.4.4,rhel5.4.0 and the cluster is [rhel6.5.0, pc-1.0, pseries]} The above error shows up right after the machine is finished installing. Im sure there is something simple I am missing but at the moment I have no idea. Attached is my host-deploy log. For those that can help thanks again! Doug Bishop Sr. Systems Engineer dbis...@controlscan.com Controlscan, Inc. 11475 Great Oaks Way, Suite 300 Alpharetta, GA 30022 www.controlscan.com NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) or entity and may contain sensitive information that is confidential, proprietary, privileged or otherwise protected by law. Any unauthorized review, use, disclosure, distribution, copying or other use of, or taking of any action in reliance upon, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this message. This e-mail is and any response to it will be unencrypted and, therefore, potentially unsecure. The recipient should check this email and any attachments for the presence of viruses/malware according to security best practices. Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users that is very strange. what does running 'qemu-kvm -M ?' shows? (and just to make sure, running 'qemu-kvm-rhev -M ?' as well) NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) or entity and may contain sensitive information that is confidential, proprietary, privileged or otherwise protected by law. Any unauthorized review, use, disclosure, distribution, copying or other use of, or taking of any action in reliance upon, is strictly prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of this message. This e-mail is and any response to it will be unencrypted and, therefore, potentially unsecure. The recipient should check this email and any attachments for the presence of viruses/malware according to security best practices. Thank you. image001.jpg@01CF5D78.4B809390 Description: image001.jpg@01CF5D78.4B809390 image002.jpg@01CF5D78.4B809390 Description: image002.jpg@01CF5D78.4B809390 image003.jpg@01CF5D78.4B809390 Description: image003.jpg@01CF5D78.4B809390 image004.png@01CF5D78.4B809390 Description: image004.png@01CF5D78.4B809390 image005.jpg@01CF5D78.4B809390 Description: image005.jpg@01CF5D78.4B809390 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] gluster performance oVirt 3.4
On 05/13/2014 07:27 PM, Vadims Korsaks wrote: Citējot Humble Devassy Chirammal humble.deva...@gmail.com : | | Citējot Vijay Bellur vbel...@redhat.com : | On 05/11/2014 02:04 AM, Vadims Korsaks wrote: |HI! | |Created 2 node setup with oVirt 3.4 and | CentOS 6.5, for storage created |2 node replicated gluster (3.5) fs on same | hosts with oVirt. |mount looks like this: |127.0.0.1:/gluster01 on | | /rhev/data-center/mnt/glusterSD/127.0.0.1:_gluster01 | type fuse.glusterfs | | (rw,default_permissions,allow_other,max_read=131072) | |when i making gluster test with dd, something | like |dd if=/dev/zero bs=1M count=2 | | of=/rhev/data-center/mnt/glusterSD/127.0.0.1\:_gluster01/kaka |i'm gettting speed ~ 110 MB/s, so this is | 1Gbps speed of ethernet adapter | |but with in VM created in oVirt speed is | lower than 20 MB/s | |why there is so huge difference? |how can improve VMs disks speed? | | | What are your gluster volume settings? Have you | applied the following | performance tunables in gluster's virt profile: | | eager-lock=enable | remote-dio=enable | | Regards, | Vijay | | setting were: | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | storage.owner-gid: 36 | storage.owner-uid: 36 | | | add your settings settings now it looks | | [root@centos155 ~]# gluster volume info gluster01 | | Volume Name: gluster01 | Type: Replicate | Volume ID: 436edaa3-ac8b-421f-aa35-68b5bd7064b6 | Status: Started | Number of Bricks: 1 x 2 = 2 | Transport-type: tcp | Bricks: | Brick1: 10.2.75.152:/mnt/gluster01/brick | Brick2: 10.2.75.155:/mnt/gluster01/brick | Options Reconfigured: | network.remote-dio: enable | cluster.eager-lock: enable | storage.owner-gid: 36 | storage.owner-uid: 36 | | | but this didn't affected performace in any big way | should hosts to be restarted? | glusterfs storage domain configuration GUI got Optimize for virt. store option which have to be enabled when configuring for virt store. Ref#http://www.ovirt.org/Features/GlusterFS_Storage_Domain If the configuration is manual, you need to set the group to 'virt' as shown below #gluster volume set VOLNAME group virt This will enable below options on gluster volume : quick-read=off read-ahead=off io-cache=off stat-prefetch=off eager-lock=enable remote-dio=on Can you please make sure group has set properly ? Also, invoke dd with oflag=direct option and check whether it helps .. --Humble tnx a lot!! now it's much better - from VM i can get dd with ~ 60 MB/s this is still ~ x2 lower than from host, but x3 better than it was before :) BTW could not found GUI got Optimize for virt. store option in oVirt 3.5 The option Optimize for Virt store is available when you select a volume in Ovirt - both as a right click menu option as well as a button in the top sub navigation bar. You also can check this option while creating a gluster volume using the oVirt GUI ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users