[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
I have an engine restored from a back-up but with no hosts connected I'll try with that first. Thanks, Paul S. From: Sahina Bose Sent: 17 October 2018 12:40 To: Staniforth, Paul Cc: Gobinda Das; rk...@humboldt.edu; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 6:08 PM Staniforth, Paul mailto:p.stanifo...@leedsbeckett.ac.uk>> wrote: Yes it was originally installed in virt only rather than both and it doesn't ask when running engine-setup, in the answerfile it has OVESETUP_CONFIG/applicationMode=none:None I don't think there's a way to change this via reconfigure. But if you're up to experiment, you can try changing the value of "ApplicationMode" to 255 in the database table "vdc_options". Restart your engine once you make this change. It lets me configure it at the cluster level so I was initially confused as to why it didn't work. I have been trying to find an option for otopi. Thanks, Paul S. From: Sahina Bose mailto:sab...@redhat.com>> Sent: 16 October 2018 12:53 To: Staniforth, Paul; Gobinda Das Cc: rk...@humboldt.edu<mailto:rk...@humboldt.edu>; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul mailto:p.stanifo...@leedsbeckett.ac.uk>> wrote: Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider Ah, you did not install in "Both" mode? I haven't tried changing from virt to virt+gluster mode for engine deployment. Does running engine-setup again prompt for this? If not, we'll need to dig into this a bit more. Or are you talking of the services enabled on Cluster? Thanks, Paul S. From: Sahina Bose mailto:sab...@redhat.com>> Sent: 16 October 2018 08:28 To: rk...@humboldt.edu<mailto:rk...@humboldt.edu> Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani mailto:rk...@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/. Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RS6AFOTG3PVFE5UKVGLNRIDXH2AIX6YJ/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
On Tue, Oct 16, 2018 at 6:08 PM Staniforth, Paul < p.stanifo...@leedsbeckett.ac.uk> wrote: > Yes it was originally installed in virt only rather than both and it > doesn't ask when running engine-setup, in the answerfile it has > > OVESETUP_CONFIG/applicationMode=none:None > I don't think there's a way to change this via reconfigure. But if you're up to experiment, you can try changing the value of "ApplicationMode" to 255 in the database table "vdc_options". Restart your engine once you make this change. > > It lets me configure it at the cluster level so I was initially confused > as to why it didn't work. > > > I have been trying to find an option for otopi. > > > Thanks, > > Paul S. > > > -- > *From:* Sahina Bose > *Sent:* 16 October 2018 12:53 > *To:* Staniforth, Paul; Gobinda Das > *Cc:* rk...@humboldt.edu; users > *Subject:* Re: [ovirt-users] Re: How do you install oVirt Hyperconverged > with six or nine nodes instead of the default three nodes? > > > > On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul < > p.stanifo...@leedsbeckett.ac.uk> wrote: > >> Hello Sahina, >> >> do you know how to configure the gluster service in >> an already installed engine, it was originally installed with virt only >> service >> >> engine-setup --reconfigure-optional-components only allows me to install >> the ovirt-ovn-provider >> > > Ah, you did not install in "Both" mode? I haven't tried changing from virt > to virt+gluster mode for engine deployment. Does running engine-setup again > prompt for this? If not, we'll need to dig into this a bit more. > > Or are you talking of the services enabled on Cluster? > >> >> Thanks, >> >> Paul S. >> ------ >> *From:* Sahina Bose >> *Sent:* 16 October 2018 08:28 >> *To:* rk...@humboldt.edu >> *Cc:* users >> *Subject:* [ovirt-users] Re: How do you install oVirt Hyperconverged >> with six or nine nodes instead of the default three nodes? >> >> >> >> On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani >> wrote: >> >>> Already have working three node 4.2.5 HA cluster in the lab using this >>> guide: >>> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/ >>> . >>> >>> Now I would like to test a six or nine node cluster mentioned in the >>> RHHI 1.1 guide. Is there some doc I am missing? >>> >> >> If you already have the setup running with 3 nodes, you can add the >> additional nodes using the oVirt engine. >> >> >>> Thanks >>> ___ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ >>> >> To view the terms under which this email is distributed, please go to:- >> http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html >> >> To view the terms under which this email is distributed, please go to:- > http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/44KN253FBGMTDFMSS2PJCLERMNIYULB2/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
The 3 node cluster will remain a dev cluster for testing. I would like to set up a new six node or nine node cluster from scratch using a different set of hosts. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2KY2LM7WJ4WUFRHFOC54BDOE7TRUI2ML/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
Yes it was originally installed in virt only rather than both and it doesn't ask when running engine-setup, in the answerfile it has OVESETUP_CONFIG/applicationMode=none:None It lets me configure it at the cluster level so I was initially confused as to why it didn't work. I have been trying to find an option for otopi. Thanks, Paul S. From: Sahina Bose Sent: 16 October 2018 12:53 To: Staniforth, Paul; Gobinda Das Cc: rk...@humboldt.edu; users Subject: Re: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul mailto:p.stanifo...@leedsbeckett.ac.uk>> wrote: Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider Ah, you did not install in "Both" mode? I haven't tried changing from virt to virt+gluster mode for engine deployment. Does running engine-setup again prompt for this? If not, we'll need to dig into this a bit more. Or are you talking of the services enabled on Cluster? Thanks, Paul S. From: Sahina Bose mailto:sab...@redhat.com>> Sent: 16 October 2018 08:28 To: rk...@humboldt.edu<mailto:rk...@humboldt.edu> Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani mailto:rk...@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/. Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HM24QU34QVL6JDXGKQLZPE7TH42IIYWP/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
On Tue, Oct 16, 2018 at 4:47 PM Staniforth, Paul < p.stanifo...@leedsbeckett.ac.uk> wrote: > Hello Sahina, > > do you know how to configure the gluster service in > an already installed engine, it was originally installed with virt only > service > > engine-setup --reconfigure-optional-components only allows me to install > the ovirt-ovn-provider > Ah, you did not install in "Both" mode? I haven't tried changing from virt to virt+gluster mode for engine deployment. Does running engine-setup again prompt for this? If not, we'll need to dig into this a bit more. Or are you talking of the services enabled on Cluster? > > Thanks, > > Paul S. > -- > *From:* Sahina Bose > *Sent:* 16 October 2018 08:28 > *To:* rk...@humboldt.edu > *Cc:* users > *Subject:* [ovirt-users] Re: How do you install oVirt Hyperconverged with > six or nine nodes instead of the default three nodes? > > > > On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani wrote: > >> Already have working three node 4.2.5 HA cluster in the lab using this >> guide: >> https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/ >> . >> >> Now I would like to test a six or nine node cluster mentioned in the RHHI >> 1.1 guide. Is there some doc I am missing? >> > > If you already have the setup running with 3 nodes, you can add the > additional nodes using the oVirt engine. > > >> Thanks >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ >> > To view the terms under which this email is distributed, please go to:- > http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ZLUTCLNUSGK3S5HKFZRLEB2UJLEDGEA2/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
Hello Sahina, do you know how to configure the gluster service in an already installed engine, it was originally installed with virt only service engine-setup --reconfigure-optional-components only allows me to install the ovirt-ovn-provider. Thanks, Paul S. From: Sahina Bose Sent: 16 October 2018 08:28 To: rk...@humboldt.edu Cc: users Subject: [ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes? On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani mailto:rk...@humboldt.edu>> wrote: Already have working three node 4.2.5 HA cluster in the lab using this guide: https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/. Now I would like to test a six or nine node cluster mentioned in the RHHI 1.1 guide. Is there some doc I am missing? If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. Thanks ___ Users mailing list -- users@ovirt.org<mailto:users@ovirt.org> To unsubscribe send an email to users-le...@ovirt.org<mailto:users-le...@ovirt.org> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ To view the terms under which this email is distributed, please go to:- http://disclaimer.leedsbeckett.ac.uk/disclaimer/disclaimer.html ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/DKIJHTTZC3NNOLPODPHUP4PJY5BFEN3U/
[ovirt-users] Re: How do you install oVirt Hyperconverged with six or nine nodes instead of the default three nodes?
On Tue, Oct 16, 2018 at 5:01 AM Ravi Chalasani wrote: > Already have working three node 4.2.5 HA cluster in the lab using this > guide: > https://ovirt.org/blog/2017/04/up-and-running-with-ovirt-4.1-and-gluster-storage/ > . > > Now I would like to test a six or nine node cluster mentioned in the RHHI > 1.1 guide. Is there some doc I am missing? > If you already have the setup running with 3 nodes, you can add the additional nodes using the oVirt engine. > Thanks > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/HJKCQVJGI3M3Y6QKBW75AGUVRBRRBHR3/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/K7SSV7LMWGD5NNYZZD5AJJJD6IFCHWNV/
