Re: [Veritas-bu] Status 57 - Resolutions?
A reinstall seemed to fix the situation. Thanks for all the suggestions. Jason > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Patrick > Sent: Monday, September 10, 2007 12:41 PM > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > I assume from your email that the master is also the media > server. Have you tried telnet bpcd from > both ends. If you run bpgetconfig -M from the master > what are the results? > > If the master is not the media server can the client see it > and vise versa? > > Regards, > > Patrick Whelan > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Brooks, Jason > Sent: 10 September 2007 16:15 > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Status 57 - Resolutions? > > I've been getting Status 57s on a host since we added it to > the NBU environment. Here's the setup: > Master server: Windows2K3, SP2 with NBU 6.0MP4 > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > Anytime a backup is initiated, it ends with a 57. Looking at > the BPCD logs, here's what I see: > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > 192.168.64.169.1952 TO 192.168.64.206.13724 > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection > from host master.longwood.edu (192.168.64.169) port 1952 > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing > master and master.longwood.edu > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname > comparison succeeded > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd > socket on stderr > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > initiated > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS > authentication with master.longwood.edu > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config > key not found. > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:40.271 [3152.1472] <2> bpcd main: > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > main: BPCD_GET_VERSION_RQST > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = > Intel x86 - Unknown - Revision x403 > 10:31:41.755 [3152.1472] <2> getUnameInfo: END > 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST > 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status > --->exiting > > By this, I can't see that it fails. Is it dumping to another > service and failing there? The only other thing I have > logging is bpbkar and vnetd, and there's nothing there. > > I've retried with loglevel at 5, but still nothing. The > firewall isn't turned on on the client, so I'm at a loss. > > Suggestions? > > Thanks, > Jason > > > Jason Brooks > Computer Systems Engineer > IITS - Longwood University > voice - (434) 395-2034 > fax - (434) 395-2035 > mailto:<[EMAIL PROTECTED]> > > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > smime.p7s Description: S/MIME cryptographic signature ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Status 57 - Resolutions?
The master is the media server. Bpgetconfig -M dumps the config. Was there anything particular that I should look for? I can telnet from client to master on bpcd fine, and vice versa. Reinstall client? That's about where I'm at now. Jason > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Patrick > Sent: Monday, September 10, 2007 12:41 PM > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > I assume from your email that the master is also the media > server. Have you tried telnet bpcd from > both ends. If you run bpgetconfig -M from the master > what are the results? > > If the master is not the media server can the client see it > and vise versa? > > Regards, > > Patrick Whelan > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Brooks, Jason > Sent: 10 September 2007 16:15 > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Status 57 - Resolutions? > > I've been getting Status 57s on a host since we added it to > the NBU environment. Here's the setup: > Master server: Windows2K3, SP2 with NBU 6.0MP4 > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > Anytime a backup is initiated, it ends with a 57. Looking at > the BPCD logs, here's what I see: > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > 192.168.64.169.1952 TO 192.168.64.206.13724 > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection > from host master.longwood.edu (192.168.64.169) port 1952 > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing > master and master.longwood.edu > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname > comparison succeeded > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd > socket on stderr > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > initiated > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS > authentication with master.longwood.edu > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config > key not found. > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:40.271 [3152.1472] <2> bpcd main: > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > main: BPCD_GET_VERSION_RQST > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = > Intel x86 - Unknown - Revision x403 > 10:31:41.755 [3152.1472] <2> getUnameInfo: END > 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST > 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status > --->exiting > > By this, I can't see that it fails. Is it dumping to another > service and failing there? The only other thing I have > logging is bpbkar and vnetd, and there's nothing there. > > I've retried with loglevel at 5, but still nothing. The > firewall isn't turned on on the client, so I'm at a loss. > > Suggestions? > > Thanks, > Jason > > > Jason Brooks > Computer Systems Engineer > IITS - Longwood University > voice - (434) 395-2034 > fax - (434) 395-2035 > mailto:<[EMAIL PROTECTED]> > > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > smime.p7s Description: S/MIME cryptographic signature ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Status 57 - Resolutions?
I assume from your email that the master is also the media server. Have you tried telnet bpcd from both ends. If you run bpgetconfig -M from the master what are the results? If the master is not the media server can the client see it and vise versa? Regards, Patrick Whelan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, Jason Sent: 10 September 2007 16:15 To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Status 57 - Resolutions? I've been getting Status 57s on a host since we added it to the NBU environment. Here's the setup: Master server: Windows2K3, SP2 with NBU 6.0MP4 Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client Anytime a backup is initiated, it ends with a 57. Looking at the BPCD logs, here's what I see: 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM 192.168.64.169.1952 TO 192.168.64.206.13724 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host master.longwood.edu (192.168.64.169) port 1952 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and master.longwood.edu 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison succeeded 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on stderr 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 initiated 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication with master.longwood.edu 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST 10:31:39.458 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not found. 10:31:39.677 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:40.271 [3152.1472] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = Intel x86 - Unknown - Revision x403 10:31:41.755 [3152.1472] <2> getUnameInfo: END 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status --->exiting By this, I can't see that it fails. Is it dumping to another service and failing there? The only other thing I have logging is bpbkar and vnetd, and there's nothing there. I've retried with loglevel at 5, but still nothing. The firewall isn't turned on on the client, so I'm at a loss. Suggestions? Thanks, Jason Jason Brooks Computer Systems Engineer IITS - Longwood University voice - (434) 395-2034 fax - (434) 395-2035 mailto:<[EMAIL PROTECTED]> ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Status 57 - Resolutions?
Jason, Also, make sure the source IP address of the client is recognizable by the master. I have seen in some cases where a multi-home hosts is routing BP traffic from an interface not recognized by the master What about a tool similar to tcpdump, or snoop to examine your traffic? Thanks, Chris Hall -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blaine Robison Sent: Monday, September 10, 2007 12:03 PM To: Brooks, Jason; [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Status 57 - Resolutions? Did You try running bptestbpcd to determine if the ports were open? --- "Brooks, Jason" <[EMAIL PROTECTED]> wrote: > I've ran that with success. The host can resolve the master and they're on > the same subnet. For the Windows folks, the client is in a child domain of > the master. None of the troubleshooting steps for the 57s have produced > anything - i.e., all the steps have succeeded. That's why I'm wondering > about the next step, which I thought was bpbkar, but produced no logs at > all. > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf > > Of Bobby Williams > > Sent: Monday, September 10, 2007 11:22 AM > > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > > > Run bpclntcmd -pn on the client. > > > > I would suspect that the client can't resolve the master. > > > > Can you view the host properties via the GUI? > > > > > > > > > > Bobby Williams > > 2205 Peterson Drive > > Chattanooga, Tennessee 37421 > > 423-296-8200 > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf > > Of Brooks, Jason > > Sent: Monday, September 10, 2007 11:15 AM > > To: veritas-bu@mailman.eng.auburn.edu > > Subject: [Veritas-bu] Status 57 - Resolutions? > > > > I've been getting Status 57s on a host since we added it to > > the NBU environment. Here's the setup: > > Master server: Windows2K3, SP2 with NBU 6.0MP4 > > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > > > Anytime a backup is initiated, it ends with a 57. Looking at > > the BPCD logs, here's what I see: > > > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > > 192.168.64.169.1952 TO 192.168.64.206.13724 > > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection > > from host master.longwood.edu (192.168.64.169) port 1952 > > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing > > master and master.longwood.edu > > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname > > comparison succeeded > > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd > > socket on stderr > > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > > initiated > > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS > > authentication with master.longwood.edu > > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > > NetBackup 6.0 > > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config > > key not found. > > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > > NetBackup 6.0 > > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > > 10:31:40.271 [3152.1472] <2> bpcd main: > > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > > main: BPCD_GET_VERSION_RQST > > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > > 10:31:41.7
Re: [Veritas-bu] Status 57 - Resolutions?
Did You try running bptestbpcd to determine if the ports were open? --- "Brooks, Jason" <[EMAIL PROTECTED]> wrote: > I've ran that with success. The host can resolve the master and they're on > the same subnet. For the Windows folks, the client is in a child domain of > the master. None of the troubleshooting steps for the 57s have produced > anything - i.e., all the steps have succeeded. That's why I'm wondering > about the next step, which I thought was bpbkar, but produced no logs at > all. > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf > > Of Bobby Williams > > Sent: Monday, September 10, 2007 11:22 AM > > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > > > Run bpclntcmd -pn on the client. > > > > I would suspect that the client can't resolve the master. > > > > Can you view the host properties via the GUI? > > > > > > > > > > Bobby Williams > > 2205 Peterson Drive > > Chattanooga, Tennessee 37421 > > 423-296-8200 > > > > -Original Message- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf > > Of Brooks, Jason > > Sent: Monday, September 10, 2007 11:15 AM > > To: veritas-bu@mailman.eng.auburn.edu > > Subject: [Veritas-bu] Status 57 - Resolutions? > > > > I've been getting Status 57s on a host since we added it to > > the NBU environment. Here's the setup: > > Master server: Windows2K3, SP2 with NBU 6.0MP4 > > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > > > Anytime a backup is initiated, it ends with a 57. Looking at > > the BPCD logs, here's what I see: > > > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > > 192.168.64.169.1952 TO 192.168.64.206.13724 > > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection > > from host master.longwood.edu (192.168.64.169) port 1952 > > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing > > master and master.longwood.edu > > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname > > comparison succeeded > > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd > > socket on stderr > > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > > initiated > > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS > > authentication with master.longwood.edu > > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > > NetBackup 6.0 > > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config > > key not found. > > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > > NetBackup 6.0 > > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > > 10:31:40.271 [3152.1472] <2> bpcd main: > > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > > main: BPCD_GET_VERSION_RQST > > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 > > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = > > Intel x86 - Unknown - Revision x403 > > 10:31:41.755 [3152.1472] <2> getUnameInfo: END > > 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST > > 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status > > --->exiting > > > > By this, I can't see that it fails. Is it dumping to another > > service and failing there? The only other thing I have
Re: [Veritas-bu] Status 57 - Resolutions?
The only other thing that I could suggest is that some other process is locking the port. Bobby Williams 2205 Peterson Drive Chattanooga, Tennessee 37421 423-296-8200 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, Jason Sent: Monday, September 10, 2007 11:35 AM To: [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Status 57 - Resolutions? I've ran that with success. The host can resolve the master and they're on the same subnet. For the Windows folks, the client is in a child domain of the master. None of the troubleshooting steps for the 57s have produced anything - i.e., all the steps have succeeded. That's why I'm wondering about the next step, which I thought was bpbkar, but produced no logs at all. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bobby > Williams > Sent: Monday, September 10, 2007 11:22 AM > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > Run bpclntcmd -pn on the client. > > I would suspect that the client can't resolve the master. > > Can you view the host properties via the GUI? > > > > > Bobby Williams > 2205 Peterson Drive > Chattanooga, Tennessee 37421 > 423-296-8200 > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Brooks, Jason > Sent: Monday, September 10, 2007 11:15 AM > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Status 57 - Resolutions? > > I've been getting Status 57s on a host since we added it to the NBU > environment. Here's the setup: > Master server: Windows2K3, SP2 with NBU 6.0MP4 > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > Anytime a backup is initiated, it ends with a 57. Looking at the BPCD > logs, here's what I see: > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > 192.168.64.169.1952 TO 192.168.64.206.13724 > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host > master.longwood.edu (192.168.64.169) port 1952 > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and > master.longwood.edu > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison > succeeded > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on > stderr > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > initiated > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication > with master.longwood.edu > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not > found. > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:40.271 [3152.1472] <2> bpcd main: > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > main: BPCD_GET_VERSION_RQST > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = Intel x86 - > Unknown - Revision x403 > 10:31:41.755 [3152.1472] <2> getUnameInfo: END > 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST > 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status > --->exiting > > By this, I can't see that it fails. Is it dumping to another service > and failing there? The only other thing I have logging is bpbkar and > vnetd, and there's nothing there. > > I've retried with loglevel at 5, but still nothing. The firewall
Re: [Veritas-bu] Status 57 - Resolutions?
Have you created all the log folders on the client and the master server? Make sure you look at the logs on the master server and the client. Doug Preston Systems Engineer Land America Tax and Flood Services Phone 626-339-5221 Ext 1104 Email [EMAIL PROTECTED] NOTICE: This electronic mail transmission may constitute a communication that is legally privileged. It is not intended for transmission to, or receipt by, any unauthorized persons. If you have received this electronic mail transmission in error, please delete it from your system without copying it, and notify the sender by reply e-mail, so that our address record can be corrected. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, Jason Sent: Monday, September 10, 2007 8:35 AM To: [EMAIL PROTECTED]; veritas-bu@mailman.eng.auburn.edu Subject: Re: [Veritas-bu] Status 57 - Resolutions? I've ran that with success. The host can resolve the master and they're on the same subnet. For the Windows folks, the client is in a child domain of the master. None of the troubleshooting steps for the 57s have produced anything - i.e., all the steps have succeeded. That's why I'm wondering about the next step, which I thought was bpbkar, but produced no logs at all. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Bobby > Williams > Sent: Monday, September 10, 2007 11:22 AM > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > Run bpclntcmd -pn on the client. > > I would suspect that the client can't resolve the master. > > Can you view the host properties via the GUI? > > > > > Bobby Williams > 2205 Peterson Drive > Chattanooga, Tennessee 37421 > 423-296-8200 > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Brooks, Jason > Sent: Monday, September 10, 2007 11:15 AM > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Status 57 - Resolutions? > > I've been getting Status 57s on a host since we added it to the NBU > environment. Here's the setup: > Master server: Windows2K3, SP2 with NBU 6.0MP4 > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > Anytime a backup is initiated, it ends with a 57. Looking at the BPCD > logs, here's what I see: > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > 192.168.64.169.1952 TO 192.168.64.206.13724 > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host > master.longwood.edu (192.168.64.169) port 1952 > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and > master.longwood.edu > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison > succeeded > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on > stderr > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > initiated > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication > with master.longwood.edu > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not > found. > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:40.271 [3152.1472] <2> bpcd main: > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > main: BPCD_GET_VERSION_RQST > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION =
Re: [Veritas-bu] Status 57 - Resolutions?
I've ran that with success. The host can resolve the master and they're on the same subnet. For the Windows folks, the client is in a child domain of the master. None of the troubleshooting steps for the 57s have produced anything - i.e., all the steps have succeeded. That's why I'm wondering about the next step, which I thought was bpbkar, but produced no logs at all. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Bobby Williams > Sent: Monday, September 10, 2007 11:22 AM > To: Brooks, Jason; veritas-bu@mailman.eng.auburn.edu > Subject: Re: [Veritas-bu] Status 57 - Resolutions? > > Run bpclntcmd -pn on the client. > > I would suspect that the client can't resolve the master. > > Can you view the host properties via the GUI? > > > > > Bobby Williams > 2205 Peterson Drive > Chattanooga, Tennessee 37421 > 423-296-8200 > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Brooks, Jason > Sent: Monday, September 10, 2007 11:15 AM > To: veritas-bu@mailman.eng.auburn.edu > Subject: [Veritas-bu] Status 57 - Resolutions? > > I've been getting Status 57s on a host since we added it to > the NBU environment. Here's the setup: > Master server: Windows2K3, SP2 with NBU 6.0MP4 > Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client > > Anytime a backup is initiated, it ends with a 57. Looking at > the BPCD logs, here's what I see: > > 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM > 192.168.64.169.1952 TO 192.168.64.206.13724 > 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete > 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection > from host master.longwood.edu (192.168.64.169) port 1952 > 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing > master and master.longwood.edu > 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname > comparison succeeded > 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 > 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd > socket on stderr > 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 > initiated > 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS > authentication with master.longwood.edu > 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST > 10:31:39.458 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST > 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config > key not found. > 10:31:39.677 [3152.1472] <4> bpcd main: Version string is > NetBackup 6.0 > 60"C:\ProgramFiles\VERITAS\NetBackup\bin" > 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST > 10:31:40.271 [3152.1472] <2> bpcd main: > BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd > main: BPCD_GET_VERSION_RQST > 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST > 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST > 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 > 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = > Intel x86 - Unknown - Revision x403 > 10:31:41.755 [3152.1472] <2> getUnameInfo: END > 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST > 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status > --->exiting > > By this, I can't see that it fails. Is it dumping to another > service and failing there? The only other thing I have > logging is bpbkar and vnetd, and there's nothing there. > > I've retried with loglevel at 5, but still nothing. The > firewall isn't turned on on the client, so I'm at a loss. > > Suggestions? > > Thanks, > Jason > > > Jason Brooks > Computer Systems Engineer > IITS - Longwood University > voice - (434) 395-2034 > fax - (434) 395-2035 > mailto:<[EMAIL PROTECTED]> > > ___ > Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu > smime.p7s Description: S/MIME cryptographic signature ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Status 57 - Resolutions?
Run bpclntcmd -pn on the client. I would suspect that the client can't resolve the master. Can you view the host properties via the GUI? Bobby Williams 2205 Peterson Drive Chattanooga, Tennessee 37421 423-296-8200 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brooks, Jason Sent: Monday, September 10, 2007 11:15 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Status 57 - Resolutions? I've been getting Status 57s on a host since we added it to the NBU environment. Here's the setup: Master server: Windows2K3, SP2 with NBU 6.0MP4 Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client Anytime a backup is initiated, it ends with a 57. Looking at the BPCD logs, here's what I see: 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM 192.168.64.169.1952 TO 192.168.64.206.13724 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host master.longwood.edu (192.168.64.169) port 1952 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and master.longwood.edu 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison succeeded 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on stderr 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 initiated 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication with master.longwood.edu 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST 10:31:39.458 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not found. 10:31:39.677 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:40.271 [3152.1472] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = Intel x86 - Unknown - Revision x403 10:31:41.755 [3152.1472] <2> getUnameInfo: END 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status --->exiting By this, I can't see that it fails. Is it dumping to another service and failing there? The only other thing I have logging is bpbkar and vnetd, and there's nothing there. I've retried with loglevel at 5, but still nothing. The firewall isn't turned on on the client, so I'm at a loss. Suggestions? Thanks, Jason Jason Brooks Computer Systems Engineer IITS - Longwood University voice - (434) 395-2034 fax - (434) 395-2035 mailto:<[EMAIL PROTECTED]> ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Status 57 - Resolutions?
I've been getting Status 57s on a host since we added it to the NBU environment. Here's the setup: Master server: Windows2K3, SP2 with NBU 6.0MP4 Client: Windows2K3 Enterprise, R2 SP2 with 6.0MP4 client Anytime a backup is initiated, it ends with a 57. Looking at the BPCD logs, here's what I see: 10:31:38.505 [3152.1472] <2> logconnections: BPCD ACCEPT FROM 192.168.64.169.1952 TO 192.168.64.206.13724 10:31:38.505 [3152.1472] <2> bpcd main: setup_sockopts complete 10:31:38.521 [3152.1472] <2> bpcd peer_hostname: Connection from host master.longwood.edu (192.168.64.169) port 1952 10:31:38.521 [3152.1472] <2> bpcd valid_server: comparing master and master.longwood.edu 10:31:38.521 [3152.1472] <4> bpcd valid_server: hostname comparison succeeded 10:31:38.708 [3152.1472] <2> bpcd main: output socket port number = 1 10:31:39.021 [3152.1472] <2> bpcd main: Duplicated vnetd socket on stderr 10:31:39.021 [3152.1472] <2> bpcd main: < NetBackup 6.0 0 initiated 10:31:39.021 [3152.1472] <2> bpcd main: Not using VxSS authentication with master.longwood.edu 10:31:39.177 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:39.458 [3152.1472] <2> bpcd main: BPCD_GET_NB_VERSION_RQST 10:31:39.458 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.677 [3152.1472] <2> bpcd main: BPCD_GET_BE_VERSION_RQST 10:31:39.677 [3152.1472] <4> bpcd main: Backup Exec Config key not found. 10:31:39.677 [3152.1472] <4> bpcd main: Version string is NetBackup 6.0 60"C:\ProgramFiles\VERITAS\NetBackup\bin" 10:31:39.942 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:40.271 [3152.1472] <2> bpcd main: BPCD_READ_HOST_CONFIG_RQST 10:31:40.880 [3152.1472] <2> bpcd main: BPCD_GET_VERSION_RQST 10:31:41.114 [3152.1472] <2> bpcd main: BPCD_GET_PRIVILEGES_RQST 10:31:41.427 [3152.1472] <2> bpcd main: BPCD_GET_PLATFORM_RQST 10:31:41.755 [3152.1472] <2> bpcd main: BPCD_GET_UNAME_RQST 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_SYSNAME = WindowsNET 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_NODENAME = CLIENT1 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_RELEASE = 5 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_VERSION = 2 10:31:41.755 [3152.1472] <2> getUnameInfo: UNAME_MACHINE = Intel x86 - Unknown - Revision x403 10:31:41.755 [3152.1472] <2> getUnameInfo: END 10:31:41.989 [3152.1472] <2> bpcd main: BPCD_DISCONNECT_RQST 10:31:41.989 [3152.1472] <2> bpcd exit_bpcd: exit status --->exiting By this, I can't see that it fails. Is it dumping to another service and failing there? The only other thing I have logging is bpbkar and vnetd, and there's nothing there. I've retried with loglevel at 5, but still nothing. The firewall isn't turned on on the client, so I'm at a loss. Suggestions? Thanks, Jason Jason Brooks Computer Systems Engineer IITS - Longwood University voice - (434) 395-2034 fax - (434) 395-2035 mailto:<[EMAIL PROTECTED]> smime.p7s Description: S/MIME cryptographic signature ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
