Re: [weewx-user] Re: V3.9.1
Super big thanks to TK and to all who contribute to weewx!Thank you! Upgraded from 3.8.0 to 3.9.1 last night. Everything is running smoothly. The new seasons skin is sweet! :) Thank, Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Replaced VantagePro2 console with new console, more errors
I upgraded from an old console & firmware (1.90) to a new console & firmware (3.80). Getting some errors. Jan 11 22:11:48 raspberrypi1 weewx[12267]: vantage: ip-read error: timed out Jan 11 22:11:57 raspberrypi1 weewx[12267]: vantage: ip-read error: timed out Jan 11 22:12:07 raspberrypi1 weewx[12267]: vantage: Unable to wake up console Jan 11 22:12:07 raspberrypi1 weewx[12267]: vantage: LOOP try #2; error: Unable to wake up Vantage console Jan 11 22:12:08 raspberrypi1 weewx[12267]: vantage: No received from console Jan 11 22:12:08 raspberrypi1 weewx[12267]: vantage: LOOP try #3; error: No received from Vantage console Jan 11 22:12:17 raspberrypi1 weewx[12267]: vantage: ip-read error: timed out Is anyone using a VP2 console with 3.80 firmware and weewx 3.80? The versions match which is sort of odd. Davis doesn't list a console firmware of 3.80 which is also odd. Thanks, Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
Update: I upgraded my console to the latest and greatest firmware. Still seeing network issues so the problem isn't the console firmware. I'm using an Ethernet to WiFi bridge between logger and network. I think that is my issue. Going to make some network changes to see if I can isolate my timeout problem. Doug B. > On Wednesday, December 27, 2017 at 5:13:14 AM UTC-8, Tom Keffer wrote: >> >> Thanks, Doug >> >> Could you put your comments in the Wiki? That way it will be easier for >> someone to find, rather than search through the nearly 5,000 topics in >> weewx-user. >> >> Perhaps something in the hardware >> <https://github.com/weewx/weewx/wiki#hardware> section? >> >> -tk >> >> On Tue, Dec 26, 2017 at 7:53 PM, Doug Bo wrote: >> >>> I'm running an older Vantage Pro2 console, vintage 2007, firmware 1.90 >>> (can't update firmware due to console hardware changes) >>> My WeatherlinkIP is running current firmware but console seems to be >>> very slow to respond. I disabled the upload to weatherlink. >>> >>> I had to tweak the conf file to get it to run more than 24 hours. The >>> parameter adjustments below are based on threads I found in this forum. >>> Hopefully my discoveries will help someone. Although I doubt anyone (other >>> than me) is running old consoles. LOL >>> >>> Any other tips are appreciated. Thanks. >>> >>> I'm currently discussing my options with Davis on updating my consoles. >>> Maybe newer hardware. :) >>> >>> Doug B. >>> >>> >>> >>> loop_on_init = True >>> >>> >>> # TCP send delay (when using the WeatherLinkIP): >>> tcp_send_delay = 0.5 >>> >>> >>> >>> *# experimentcommand_delay = 1.0* >>> # The id of your ISS station (usually 1). If you use a wind meter >>> connected >>> # to a anemometer transmitter kit, use its id >>> iss_id = 2 >>> >>> # How long to wait for a response from the station before giving up >>> (in >>> # seconds; must be greater than 2) >>> # timeout = 4 >>> >>> *timeout = 8* >>> # How long to wait before trying again (in seconds) >>> # wait_before_retry = 1.2 >>> >>> *wait_before_retry = 3.5* >>> # How many times to try before giving up: >>> max_tries = 4 >>> >>> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >>> model_type = 2 >>> >>> # The driver to use: >>> driver = weewx.drivers.vantage >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to weewx-user+...@googlegroups.com. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
Firmware updaters for console & WL IP: https://www.davisnet.com/resources/weather-monitoring/#support My console has old hardware so I was stuck at 1.90 I ended up purchasing a new console which has version 3.80 which you can't download from the web. I'm going to ask Davis about this oddity. Doug B. On Sunday, January 14, 2018 at 8:15:48 AM UTC-8, John wrote: > > >> I upgraded my console to the latest and greatest firmware. >> > > My Vantage Pro2 console could use a firmware update as well. How did you > manage to get the update installed? > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
Will do. Today's chat: I was told 3.80 has "minor improvements", if current version of console firmware is working properly then don't worry about new version. I'll see if I can get in touch with an engineer tomorrow. Doug B. On Monday, January 15, 2018 at 2:23:15 PM UTC-8, bgra...@umw.edu wrote: > > Doug, > I too have an old and new console and have asked Davis about 3.80. Please > let me know if you hear from them. Thanks. > Bob -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
I agree, the 1.90 firmware is quite good. Also very true, don't fix something that isn't broke. My deal is that I run multiple consoles with multiple ISS at multiple locations with repeaters, remote temp sensors and soil sensors. I want everything to be interchangeable so that if something breaks or dies or gets weird I can swap out components quickly to keep the weather data flowing. Thus I want matching firmware to minimize surprises down the road. I'm a farmer so my weather stations have a direct impact on my wallet. I guess I'm sort of fussy about my setup. LOL I'll do a bit more digging on this to satisfy my own curiosity. Thanks for the input, Doug B. On Tuesday, January 16, 2018 at 1:37:59 PM UTC-8, Tom Keffer wrote: > > Why update? > > My console dates back to 2006 and runs fine. Take a look at the Davis > change logs and you'll see that the "fixes" are all very esoteric and > unlikely to be encountered. > https://www.davisnet.com/resources/weather-monitoring/#support (Then > select Software/Firmware, then select VantagePro 2) > > If it ain't broke, don't fix it. > > -tk > > > On Tue, Jan 16, 2018 at 2:10 PM, John > > wrote: > >> I have an old console, firmware date May 27 2005. >> >> It looks like I need a special firmware updater that is no longer >> available. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
Tom, Wow! Thank you for the amazing resource. Already found a couple of interesting tidbits. And thank you for weewx - very happy with the software. :) Thanks again, Doug B. On Tuesday, January 16, 2018 at 4:37:55 PM UTC-8, Tom Keffer wrote: > > Doug, the biggest incompatibility problem is actually between loggers. > Sometime in 2012, Davis changed the interface to the logger. Modern > consoles will not work with old loggers. The console looks for a key in the > logger and, if it doesn't find it, refuses to boot. This was to prevent 3rd > party loggers although, human nature being what it is, smart people have > found ways around the lock. > > New loggers will work with any console. > > Details here > <https://www.manula.com/manuals/pws/davis-kb/1/en/topic/green-dot-loggers> > . > > -tk > > On Tue, Jan 16, 2018 at 5:01 PM, Doug Bo > > wrote: > >> I agree, the 1.90 firmware is quite good. Also very true, don't fix >> something that isn't broke. >> >> My deal is that I run multiple consoles with multiple ISS at multiple >> locations with repeaters, remote temp sensors and soil sensors. I want >> everything to be interchangeable so that if something breaks or dies or >> gets weird I can swap out components quickly to keep the weather data >> flowing. Thus I want matching firmware to minimize surprises down the >> road. I'm a farmer so my weather stations have a direct impact on my >> wallet. I guess I'm sort of fussy about my setup. LOL >> >> I'll do a bit more digging on this to satisfy my own curiosity. >> >> Thanks for the input, >> Doug B. >> >> >> On Tuesday, January 16, 2018 at 1:37:59 PM UTC-8, Tom Keffer wrote: >>> >>> Why update? >>> >>> My console dates back to 2006 and runs fine. Take a look at the Davis >>> change logs and you'll see that the "fixes" are all very esoteric and >>> unlikely to be encountered. >>> https://www.davisnet.com/resources/weather-monitoring/#support (Then >>> select Software/Firmware, then select VantagePro 2) >>> >>> If it ain't broke, don't fix it. >>> >>> -tk >>> >>> >>> On Tue, Jan 16, 2018 at 2:10 PM, John wrote: >>> >>>> I have an old console, firmware date May 27 2005. >>>> >>>> It looks like I need a special firmware updater that is no longer >>>> available. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Android phone users weather app.
Looks really nice. I have not installed it so forgive my noob question please: does it handle 2 or 3 different weewx sites (different URL's)? Thanks, Doug B. On Monday, February 19, 2018 at 8:15:10 PM UTC-8, Greg from Oz wrote: > > I use this android app > https://play.google.com/store/apps/details?id=ales.veluscek.weatherstation&hl=en > > It was designed for Cumulus weather program but I create the same file > format using weewx. > > To make it work with weewx do the following: > > > Under [CheetahGenerator] in your skin.conf add this line: > [[[Realtime]]] > template = realtime.xml.tmpl > > Place the attached file into the same directory(folder) as the skin.conf > you just edited. > > Run wee_reports and see if a realtime.xml file is produced in the root of > the website for the weewx weather. > > Download the app to your phone and put in your url for you weather website > e.g http://yourweathersite.com.au/realtime.xml > > That's about it. Hopefully it will help someone. I use this app everyday > and I used to use cumulus on a windows pc but since swapping > to weewx I couldn't find any app that was as good. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Android weather app for weeWx users
Look forward to trying it out. Thank you for your time and efforts! Doug B. On Tuesday, April 10, 2018 at 2:01:46 AM UTC-7, John Smith wrote: > > Just to give some background I made an android app similar to Pocket PWS. > I liked the app, but it was closed source so I couldn't do anything to add > new features. > > With Tom's blessing I named the app weeWx Weather App and I have published > it to google play > https://play.google.com/store/apps/details?id=com.odiousapps.weewxweather > > To use the app there needs to be some small changes made to weeWx, to > automate some of the steps needed I created a pair of weeWx extensions, one > for metric and one for imperial units. > > I've outlined the installation steps on github: > https://github.com/evilbunny2008/weeWxWeatherApp/wiki#concise-instructions > > All comments and requests about the app should go to github > https://github.com/evilbunny2008/weeWxWeatherApp/issues > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Update vp2 firmware
Send an e-mail to Davis support and they'll walk you through it - the update method depends on the hardware date. Newer consoles can updated via the logger interface. http://www.davisnet.com/contact-us/ Doug B. On Saturday, June 24, 2017 at 7:18:09 AM UTC-7, WxManAJB wrote: > > I recently got my Davis VP2 back up and running using Weewx on a RPi. My > firmware (VP console) is 1.x and I'd like to upgrade it but I haven't been > able to find instructions on how to do so. Anyone know how to do it? > Thanks! -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Best way to add WebDAV to weewx?
Uploading files to a remote web server using FTP is not working due to multiple levels of NAT on my local network (wireless ISP) & my web server provider setup. My web server provider prefers WebDAV over FTP when uploading files from a device buried behind multiple levels of NAT. Currently I'm using cadaver in a cron job to upload the images & files generated by the StandardReport. It appears that Python has webdavclient which should do the same job as cadaver. I would like to remove the cron job and use either cadaver or webdavclient in place of FTP to upload the files & images created by StandardReport. How should I proceed? Feature request? Change code? I'm running weewx 3.8.0 on Raspberry Pi 3 using Vantage Pro2 hardware. Thanks, Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
I'm running an older Vantage Pro2 console, vintage 2007, firmware 1.90 (can't update firmware due to console hardware changes) My WeatherlinkIP is running current firmware but console seems to be very slow to respond. I disabled the upload to weatherlink. I had to tweak the conf file to get it to run more than 24 hours. The parameter adjustments below are based on threads I found in this forum. Hopefully my discoveries will help someone. Although I doubt anyone (other than me) is running old consoles. LOL Any other tips are appreciated. Thanks. I'm currently discussing my options with Davis on updating my consoles. Maybe newer hardware. :) Doug B. loop_on_init = True # TCP send delay (when using the WeatherLinkIP): tcp_send_delay = 0.5 *# experimentcommand_delay = 1.0* # The id of your ISS station (usually 1). If you use a wind meter connected # to a anemometer transmitter kit, use its id iss_id = 2 # How long to wait for a response from the station before giving up (in # seconds; must be greater than 2) # timeout = 4 *timeout = 8* # How long to wait before trying again (in seconds) # wait_before_retry = 1.2 *wait_before_retry = 3.5* # How many times to try before giving up: max_tries = 4 # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 model_type = 2 # The driver to use: driver = weewx.drivers.vantage -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Best way to add WebDAV to weewx?
Thanks guys, some good ideas and direction. :) I tried mounting davfs2 and it didn't seem like a robust solution for a wireless link. Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Some possible helps for anyone running an old Davis Vantage Pro2 console
Sounds good. Will figure out how to add my comments to the Wiki. :) Doug B. On Wednesday, December 27, 2017 at 5:13:14 AM UTC-8, Tom Keffer wrote: > > Thanks, Doug > > Could you put your comments in the Wiki? That way it will be easier for > someone to find, rather than search through the nearly 5,000 topics in > weewx-user. > > Perhaps something in the hardware > <https://github.com/weewx/weewx/wiki#hardware> section? > > -tk > > On Tue, Dec 26, 2017 at 7:53 PM, Doug Bo > > wrote: > >> I'm running an older Vantage Pro2 console, vintage 2007, firmware 1.90 >> (can't update firmware due to console hardware changes) >> My WeatherlinkIP is running current firmware but console seems to be very >> slow to respond. I disabled the upload to weatherlink. >> >> I had to tweak the conf file to get it to run more than 24 hours. The >> parameter adjustments below are based on threads I found in this forum. >> Hopefully my discoveries will help someone. Although I doubt anyone (other >> than me) is running old consoles. LOL >> >> Any other tips are appreciated. Thanks. >> >> I'm currently discussing my options with Davis on updating my consoles. >> Maybe newer hardware. :) >> >> Doug B. >> >> >> >> loop_on_init = True >> >> >> # TCP send delay (when using the WeatherLinkIP): >> tcp_send_delay = 0.5 >> >> >> >> *# experimentcommand_delay = 1.0* >> # The id of your ISS station (usually 1). If you use a wind meter >> connected >> # to a anemometer transmitter kit, use its id >> iss_id = 2 >> >> # How long to wait for a response from the station before giving up >> (in >> # seconds; must be greater than 2) >> # timeout = 4 >> >> *timeout = 8* >> # How long to wait before trying again (in seconds) >> # wait_before_retry = 1.2 >> >> *wait_before_retry = 3.5* >> # How many times to try before giving up: >> max_tries = 4 >> >> # Vantage model Type: 1 = Vantage Pro; 2 = Vantage Pro2 >> model_type = 2 >> >> # The driver to use: >> driver = weewx.drivers.vantage >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com . >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: We have finally put the last nail on the coffin for Wunderfixer?
Sort of a noob question or maybe a feature request: how about adding a web interface to search the database for historic weather data? I grab the wunderground data that I have uploaded to add to various farm records a few months or even a year after the fact. If WU is getting worse perhaps I need another solution? Thanks, Doug B. On Tuesday, May 21, 2019 at 11:09:14 AM UTC-7, tds wrote: > > For the last three days, my daily cron job of wunderfixer have returned > "503 Unavaialbe" (May 18), "404 Not Found" (May 19) and "403 Forbidden" > (May 20). > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/22591326-058f-4717-bdb4-2f91cd099e68%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Re: We have finally put the last nail on the coffin for Wunderfixer?
Hi Leon, Agreed, I realize my post is a bit off topic but if WU continues to be less than reliable then perhaps other solutions might be viable? Thanks for the reply, perhaps a new thread needs to be started by someone smarter than me about historical data search. Good luck with your research & fix. I'm a big WU fan and am sad they are slipping. Thank you for trying to resolve the issue. :) Thanks again, Doug B. On Wednesday, May 22, 2019 at 1:41:08 PM UTC-7, Leon Shaner wrote: > > Hey, Doug, > Creating a front end to search your own local data would certainly be > doable. > For sure, directing end-users to our own sites and letting them search our > historical data would be useful. > > But that wouldn't fix the problem at hand. :-/ > The wunderfixer utility is there to query what data WU has on record from > your station and to re-upload any missing data. > Basically if we can't fix this then it means WU will often be missing data > from time to time for various reasons. > Really only WU should care and end-users who go to their site to look at > historical data. So yeah, they should be invented to help, since they're > the ones missing the data, and the less reliable their data, the more > likely even end-users will begin to abandon using them. > > Regards, > \Leon > -- > Leon Shaner :: Dearborn, Michigan (iPad Pro) > > On May 22, 2019, at 4:33 PM, Doug Bo > > wrote: > > Sort of a noob question or maybe a feature request: how about adding a web > interface to search the database for historic weather data? I grab the > wunderground data that I have uploaded to add to various farm records a few > months or even a year after the fact. If WU is getting worse perhaps I > need another solution? > > Thanks, > Doug B. > > On Tuesday, May 21, 2019 at 11:09:14 AM UTC-7, tds wrote: >> >> For the last three days, my daily cron job of wunderfixer have returned >> "503 Unavaialbe" (May 18), "404 Not Found" (May 19) and "403 Forbidden" >> (May 20). >> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx...@googlegroups.com . > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/22591326-058f-4717-bdb4-2f91cd099e68%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/22591326-058f-4717-bdb4-2f91cd099e68%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/cab1516c-06fb-4dcf-80df-184565dc1db5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Running on RPi for over a year, now some engine shutdowns
Been running on RPi for over a year and now getting some weird errors. Perhaps my SD card is having issues? Maybe my router, Weatherlink IP or ISP? It is a remote site on a farm so not always easy to debug. I have run a UPS since day one so I do have clean power. My Davis console & Weatherlink IP are about 4 years old but have current firmware. Where should I start? Thanks, Doug B. Jul 15 21:48:10 raspberrypi2 weewx[820]: vantage: ip-read error: timed out Jul 15 21:48:10 raspberrypi2 weewx[820]: vantage: LOOP try #1; error: timed out Jul 15 21:49:38 raspberrypi2 weewx[820]: vantage: ip-read error: timed out Jul 15 21:49:38 raspberrypi2 weewx[820]: vantage: LOOP try #2; error: timed out Jul 15 21:49:46 raspberrypi2 weewx[820]: vantage: ip-read error: timed out Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-read error: [Errno 104] Connection reset by peer Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: Unable to wake up console Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP try #3; error: Unable to wake up Vantage console Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: Unable to wake up console Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP try #4; error: Unable to wake up Vantage console Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP max tries (4) exceeded. Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Main loop exiting. Shutting engine down. Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Shutting down StdReport thread Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno 32] Broken pipe Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Caught WeeWxIOError: Max tries exceeded while getting LOOP data. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8caee058-75ab-4a31-b766-f65264a080e8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [weewx-user] Running on RPi for over a year, now some engine shutdowns
OK, thanks. Not sure what an SD card issue looks like so had to ask. :) I have rebooted everything except for the console. I have the IP connection to the console on both of my stations and it seems to be rock solid once everything is setup. Will give it a try. Thanks, Doug B. On Tuesday, July 16, 2019 at 10:50:21 AM UTC-7, Daniel Rich wrote: > > That doesn’t sound like an SD card issue to me, it sounds like something > is up either with the console or the USB or serial connection. Usually > either unplugging and reconnecting the console or a reboot will clear that > up. > > I have the old Vantage Pro USB module and I have had a couple of times > where I have to pull it out of the console and re-insert it in order to get > communications running again. > > Dan Rich > | > http://www.employees.org/~drich/ >| "Step up to red alert!" "Are you sure, sir? >| It means changing the bulb in the sign..." > | - Red Dwarf (BBC) > > On Jul 16, 2019, 10:39 -0700, Doug Bo >, > wrote: > > Been running on RPi for over a year and now getting some weird errors. > Perhaps my SD card is having issues? Maybe my router, Weatherlink IP or > ISP? It is a remote site on a farm so not always easy to debug. I have > run a UPS since day one so I do have clean power. My Davis console & > Weatherlink IP are about 4 years old but have current firmware. > > Where should I start? > > Thanks, > Doug B. > > > Jul 15 21:48:10 raspberrypi2 weewx[820]: vantage: ip-read error: timed out > Jul 15 21:48:10 raspberrypi2 weewx[820]: vantage: LOOP try #1; error: > timed out > Jul 15 21:49:38 raspberrypi2 weewx[820]: vantage: ip-read error: timed out > Jul 15 21:49:38 raspberrypi2 weewx[820]: vantage: LOOP try #2; error: > timed out > Jul 15 21:49:46 raspberrypi2 weewx[820]: vantage: ip-read error: timed out > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-read error: [Errno > 104] Connection reset by peer > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: Unable to wake up console > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP try #3; error: > Unable to wake up Vantage console > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: Unable to wake up console > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP try #4; error: > Unable to wake up Vantage console > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: LOOP max tries (4) > exceeded. > Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Main loop exiting. > Shutting engine down. > Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Shutting down StdReport > thread > Jul 15 21:49:52 raspberrypi2 weewx[820]: vantage: ip-write error: [Errno > 32] Broken pipe > Jul 15 21:49:52 raspberrypi2 weewx[820]: engine: Caught WeeWxIOError: Max > tries exceeded while getting LOOP data. > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx...@googlegroups.com . > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/8caee058-75ab-4a31-b766-f65264a080e8%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/8caee058-75ab-4a31-b766-f65264a080e8%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4358f80f-0bec-48fa-8851-fe66be07fc5e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[weewx-user] Re: Weewx and Weather Underground
WU has been quite odd with one of my stations lately. Slow updates, I lost my data quality sticker which happens every once in a while. We've had some extreme heat events so I assume once the weather returns to "normal" that will help. I also have slow upload speeds which I'm guessing impacts WU. I was just watching WU and although WU is receiving my realtime updates, they didn't update the data table for 15 minutes. I think it is a WU problem for certain stations. Doug B. On Thursday, August 4, 2022 at 12:48:32 PM UTC-7 Alastair L wrote: > My Davis Vantage Pro2 has been running in Weewx faultlessly for over two > years now and so my problem is unlikely to be Weewx related, however, I > can’t think of a better place to ask for potential solutions to my > problem. My detailed knowledge of ‘things internet’ is pretty limited. > > Weewx sends data every 5 minutes to Weather Underground. Over the last > several months my station does not appear consistently on my WU dashboard > map or on the Wundermap. It’s been getting worse for months and I don’t > understand what the issue could be. Sometimes the station appears, mostly > now it doesn’t. > > I can see from my Weewx log that data is being posted every 5 minutes, and > from the WU dashboard data table that data is being received by WU. The WU > dashboard shows eg “Online(updated 1 minute ago)” and the data table on my > WU dashboard is being populated. I read that WU checks your station data > for consistency with local stations and stops showing your data if it’s > inaccurate, however many random checks between my readings and two local > stations on WU show no significant differences. The data timestamp for > the last data entry on my WU data table is always 5 to 20 minutes older > than the current time. The two local stations do appear consistently on > the Wundermap and the timestamp on their dashboards are within 5 minutes of > the current time leading me to think the problem could possibly be internet > related. > > The internet here is not great by current standards, with a max upload of > 1 mbps (it’s a rural location, no fibre), but the 2 other local stations > (which do not appear to run Weewx) will have the same internet > limitations. My ping to Google is consistently between 50 and 90 ms if > that’s relevant. I’ve had the internet provider check out my connection a > couple of times. I had a new router and they did some other tweaks, but > they say there are no issues. I experimented with posting data every one > minute to WU but that had no effect. I have also contacted WU a couple of > times but didn’t get any responses. So I’m out of ideas. > > Any thoughts to get my station to appear on the WU map would be greatly > appreciated. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8f63c36c-7517-4037-bb0b-38d8e946e588n%40googlegroups.com.
[weewx-user] Re: Weewx and Weather Underground
Good point about the system clock. Mine is spot on which leads me to believe when weather is extreme the QC algorithm does not like my data. My data matches my neighbors so I'm not sure what WU dislikes about my data. Be nice if WU would tell me what they don't like about my data. One observation that I've made is this: my neighbor had his wind direction 180 degrees off for weeks after a fresh install and WU continued to accept his data as valid & give preference to his station on the map. I just had to laugh. Doug B. On Friday, August 5, 2022 at 12:25:35 PM UTC-7 vince wrote: > Some quick research yesterday popped up some threads elsewhere saying > their QC algorithms sometimes drop sites from the map if they aren't > uploading reliably, which might be the original poster's underlying issue > (perhaps). > > It could also be something as minor as clock skew. I'd suggest the > original poster check their system clock for drift. Run ntp if you're not > already doing so. The systemd timesync stuff is not as good in my > experience. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fe112aca-48c4-4eac-89a2-19087a893383n%40googlegroups.com.
Re: [weewx-user] Re: Weewx and Weather Underground
Another data point, my station is missing some location info and barometric pressure on the Android app. I have verified my upload data on the WU station web page and everything looks good. One thing WU "lost" is my hardware type. I have reset the station hardware info so we'll see what happens. I have also opened a ticket with them on this issue. FWIW, a few years back WU moved some PWS stations to a new server and messed up my station. I wonder if they have performed some data house cleaning and mucked up a few things? I'll update the thread when I have additional info. Thanks all for the input. Doug B. On Sunday, August 7, 2022 at 9:02:10 AM UTC-7 tom.h...@gmail.com wrote: > I might have a hint about this. For quite some time, my VP2 (KAKWASIL2) > was one of very few PWS in my area. I had the same issues you described, > where it would disappear from the map but when viewed directly it would be > uploading. I went through all the troubleshooting steps with WU, and we > essentially came down to the sanity checks - if your weather is too far off > the "normal" reports then it's considered "bad" and not displayed until > "corrected". Thing is, my station is close to town, while the "official" > airport weather is several miles away and across a small set of hills, so > can be quite different. With no other reports to compare to, mine was > considered "off". > > As more stations came online, and more data was available, mine became > "more reliable" since more stations showed similar data. RapidFire adds > more data into the mix, so if your data is consistent and within certain > limits, then it's considered "more reliable". Also, if there's other PWS in > the area and all show similar data it helps. Mine would drop for a day or > two, then suddenly you'd query for zip 99654 and it would show as the > official town weather again :-) > > WU algorithms are known to be a bit flaky with sanity checks, but have > gotten much better over the years as more data has come online. Still, if > you're in an area with somewhat different temp/wind patterns, it can cause > WU's AI some headaches. > > > On Saturday, August 6, 2022 at 11:21:38 AM UTC-8 Alastair L wrote: > >> Hi >> >> Many thanks for all your responses and suggestions. As a result I >> believe I can report success, my station now appears reliably in the WU >> maps. >> >> I checked out the time on both my Pi and the Vantage console against my >> PC time and all were within seconds of each other. So I tried I editing >> the rapidfire setting in the config file as suggested and changed it from >> false to true. For the first time in ages my station (ILAIRG10) appeared >> on WU maps and continues to appear - great! I've waited some hours to >> confirm this is not just a fluke, and so far the station appears every time >> I have I've checked. This hasn't been possible in months. I have wasted a >> lot of time fretting over this problem and it's great to have a solution. >> >> I can see from the weewx log that weewx now sends data to WU every 2 >> seconds now instead of every 5 minutes previously and that the WU data >> table still updates every 5 minutes. Curiously the time stamp on my WU >> data table changed as soon as the rapid fire option was made, from e.g. >> 2:00PM, 2:05 PM, 2:10 PM etc to e.g 2:34 PM, 2:39 PM, 2:44 PM etc. These >> post rapidfire change time stamps now precisely align with the other two >> local stations (that I believe not running on Weewx), but what the >> significance is escapes me. The comment made regarding WU dropping >> sites from the map if they aren't uploading reliably looks to have been >> true for me, but why, to my likely simplistic understanding, firing data at >> WU 150 times in 5 minutes, instead of a nice sedate once, improves >> reliability surprises me. I'm not really clear what the logic behind >> this is but it works for me. Perhaps someone can suggest an explanation? >> >> Anyway, I'm happy now and thanks once again to you all for your input. >> >> Alastair >> >>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/dbf454bc-6fb3-4d76-8c97-46cb4efcebe0n%40googlegroups.com.
Re: [weewx-user] Re: Weewx and Weather Underground
My guess on Rapid Fire is that if your neighbors are doing it then the WU app "downgrades" your station. Back 10-15 years ago, I uploaded at 5 min intervals & had no neighbors uploading to WU. As more neighbors started uploading and switching to Rapid Fire I was sort of left behind. My data showed up on the web but the app viewed my station as a 3rd class citizen. Much has changed at WU over the years with the web and app so just my observations. YMMV :) Play with the config until you get the desired results. LOL Doug B. On Sunday, August 7, 2022 at 12:54:31 PM UTC-7 tast...@gmail.com wrote: > Curious that enabling rapid-fire improved reliability for you. I was > having reliability issues posting to WU and was told that having it enabled > led to problems. So I disabled, and things have been consistently good for > me over the past month (i.e. since that change). > > On Sunday, August 7, 2022 at 1:53:44 PM UTC-4 Doug Bo wrote: > >> Another data point, my station is missing some location info and >> barometric pressure on the Android app. I have verified my upload data on >> the WU station web page and everything looks good. One thing WU "lost" is >> my hardware type. I have reset the station hardware info so we'll see what >> happens. I have also opened a ticket with them on this issue. >> FWIW, a few years back WU moved some PWS stations to a new server and >> messed up my station. I wonder if they have performed some data house >> cleaning and mucked up a few things? >> >> I'll update the thread when I have additional info. >> >> Thanks all for the input. >> Doug B. >> >> >> On Sunday, August 7, 2022 at 9:02:10 AM UTC-7 tom.h...@gmail.com wrote: >> >>> I might have a hint about this. For quite some time, my VP2 (KAKWASIL2) >>> was one of very few PWS in my area. I had the same issues you described, >>> where it would disappear from the map but when viewed directly it would be >>> uploading. I went through all the troubleshooting steps with WU, and we >>> essentially came down to the sanity checks - if your weather is too far off >>> the "normal" reports then it's considered "bad" and not displayed until >>> "corrected". Thing is, my station is close to town, while the "official" >>> airport weather is several miles away and across a small set of hills, so >>> can be quite different. With no other reports to compare to, mine was >>> considered "off". >>> >>> As more stations came online, and more data was available, mine became >>> "more reliable" since more stations showed similar data. RapidFire adds >>> more data into the mix, so if your data is consistent and within certain >>> limits, then it's considered "more reliable". Also, if there's other PWS in >>> the area and all show similar data it helps. Mine would drop for a day or >>> two, then suddenly you'd query for zip 99654 and it would show as the >>> official town weather again :-) >>> >>> WU algorithms are known to be a bit flaky with sanity checks, but have >>> gotten much better over the years as more data has come online. Still, if >>> you're in an area with somewhat different temp/wind patterns, it can cause >>> WU's AI some headaches. >>> >>> >>> On Saturday, August 6, 2022 at 11:21:38 AM UTC-8 Alastair L wrote: >>> >>>> Hi >>>> >>>> Many thanks for all your responses and suggestions. As a result I >>>> believe I can report success, my station now appears reliably in the WU >>>> maps. >>>> >>>> I checked out the time on both my Pi and the Vantage console against my >>>> PC time and all were within seconds of each other. So I tried I editing >>>> the rapidfire setting in the config file as suggested and changed it from >>>> false to true. For the first time in ages my station (ILAIRG10) appeared >>>> on WU maps and continues to appear - great! I've waited some hours >>>> to confirm this is not just a fluke, and so far the station appears every >>>> time I have I've checked. This hasn't been possible in months. I have >>>> wasted a lot of time fretting over this problem and it's great to have a >>>> solution. >>>> >>>> I can see from the weewx log that weewx now sends data to WU every 2 >>>> seconds now instead of every 5 minutes previously and th
[weewx-user] Future support for EnviroMonitor IP Gateway (Wi-Fi/Ethernet) #6805
Will weewx support the EnviroMonitor IP Gateway in the future? I want to expand my soil moisture monitoring and the only way I can see to do it with Davis products is to make the jump to the EnviroMonitor hardware. :( Thanks, Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4d774b2e-6712-403c-8d91-6d6054473790n%40googlegroups.com.
Re: [weewx-user] Future support for EnviroMonitor IP Gateway (Wi-Fi/Ethernet) #6805
OK, thank you. I'm starting to investigate the new to me EnviroMonitor hardware & monthly cloud costs. I assume the EnviroMonitor protocol is quite different from the VP2 since the Davis site states that VP2 wireless communications will not work with the EnviroMonitor hardware. It would be great if my beloved weewx could support the EM hardware. However, given the initial cost of the gateway, nodes & sensors I'm guessing it is too expensive for most weather watchers. I think I can justify the additional expense for the farm given the expanded node network & sensor array. However the cloud expenses & Davis storing my data are sort of a bummer. Doug B. On Monday, October 12, 2020 at 5:21:56 AM UTC-7 tke...@gmail.com wrote: > No explicit plans. I don't see any documentation on their website for > whatever protocol it uses. Do you have any more information? > > On Sun, Oct 11, 2020 at 7:08 PM Doug Bo wrote: > >> >> Will weewx support the EnviroMonitor IP Gateway in the future? I want >> to expand my soil moisture monitoring and the only way I can see to do it >> with Davis products is to make the jump to the EnviroMonitor hardware. :( >> >> Thanks, >> Doug B. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/4d774b2e-6712-403c-8d91-6d6054473790n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/4d774b2e-6712-403c-8d91-6d6054473790n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b44c2a37-39a5-4be1-9183-951cb1a6d27an%40googlegroups.com.
Re: [weewx-user] Future support for EnviroMonitor IP Gateway (Wi-Fi/Ethernet) #6805
Ha ha, if I head down this path I could let you borrow one to do some investigation. ;) One other little nugget. The EM IP Gateway will receive data from a VP2 wireless ISS. https://www.davisinstruments.com/product/wireless-vantage-pro2-plus-iss/ Doug B. On Monday, October 12, 2020 at 9:21:05 AM UTC-7 tke...@gmail.com wrote: > Agree. Too expensive to buy for its limited audience. However, if Davis > wanted to *give* me one... :-) > > On Mon, Oct 12, 2020 at 8:53 AM Doug Bo wrote: > >> OK, thank you. >> >> I'm starting to investigate the new to me EnviroMonitor hardware & >> monthly cloud costs. I assume the EnviroMonitor protocol is quite >> different from the VP2 since the Davis site states that VP2 wireless >> communications will not work with the EnviroMonitor hardware. >> >> It would be great if my beloved weewx could support the EM hardware. >> However, given the initial cost of the gateway, nodes & sensors I'm >> guessing it is too expensive for most weather watchers. I think I can >> justify the additional expense for the farm given the expanded node network >> & sensor array. However the cloud expenses & Davis storing my data are >> sort of a bummer. >> >> Doug B. >> >> >> On Monday, October 12, 2020 at 5:21:56 AM UTC-7 tke...@gmail.com wrote: >> >>> No explicit plans. I don't see any documentation on their website for >>> whatever protocol it uses. Do you have any more information? >>> >>> On Sun, Oct 11, 2020 at 7:08 PM Doug Bo wrote: >>> >>>> >>>> Will weewx support the EnviroMonitor IP Gateway in the future? I want >>>> to expand my soil moisture monitoring and the only way I can see to do it >>>> with Davis products is to make the jump to the EnviroMonitor hardware. :( >>>> >>>> Thanks, >>>> Doug B. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/4d774b2e-6712-403c-8d91-6d6054473790n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/4d774b2e-6712-403c-8d91-6d6054473790n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/b44c2a37-39a5-4be1-9183-951cb1a6d27an%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/b44c2a37-39a5-4be1-9183-951cb1a6d27an%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/dba19c7d-d87c-4188-8306-a539ef8e1bd2n%40googlegroups.com.
[weewx-user] Re: Version 4.2.0 ready
Thanks to Tom & all of the contributors! Time to upgrade! :) Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/d7a9ca54-7d00-4f33-ba8e-93546b2da6e0n%40googlegroups.com.
[weewx-user] WUnderground not publishing again (Oct 4, 2022)
Anyone else having problems with Weather Underground again? Wunderground-RF: Failed to publish record Wunderground-RF: Failed to publish record Wunderground-RF: Failed to publish record I sent WU a message but this is the same station that is missing the pressure reading on their app but pressure appears just fine on the web. No response on that issue. Sigh, remember when WU just worked as intended? LOL Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/992bbe35-7d42-4438-aeb9-9f7eea2b55b3n%40googlegroups.com.
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
Surprise, surprise I got a reply! Thank you for reaching out. I checked the information we have for your station, and it looks like it went down when we turned off the old infrastructure. So the station is hanging on to something it ought not. The best thing to do is to reboot/reset/power cycle everything from the instrument itself to the internet, including your router if you can. That should insure a fresh connection to us. Please let me know if you don’t see data again on the PWS dashboard within about 20-30 minutes after finishing the reset. On Wednesday, October 5, 2022 at 8:50:00 AM UTC-7 David Barto wrote: > > On Oct 5, 2022, at 8:44 AM, Doug Bo wrote: > > > > Anyone else having problems with Weather Underground again? > > > > Wunderground-RF: Failed to publish record > > Wunderground-RF: Failed to publish record > > Wunderground-RF: Failed to publish record > > > > I sent WU a message but this is the same station that is missing the > pressure reading on their app but pressure appears just fine on the web. No > response on that issue. Sigh, remember when WU just worked as intended? LOL > > > > Doug B. > > > > Yes, I noticed this AM that WU stopped updating. > > Sigh, again. > > David > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c8bd9df6-a8be-4681-a7a6-3a7ef3503da2n%40googlegroups.com.
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
Turned on weewx debugging ... Oct 5 09:12:39 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed upload attempt 1: Oct 5 09:12:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed to publish record 2022-10-05 09:11:39 PDT (1664986299): Failed upload after 1 tries Oct 5 09:13:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed upload attempt 1: Oct 5 09:13:49 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed to publish record 2022-10-05 09:12:44 PDT (1664986364): Failed upload after 1 tries Maybe version 3.9.1 has the old URL? Which is odd, my other 3.9.1 station is running just fine. Also I switched from the old password method to the ID key. No change, still broken. Doug B. On Wednesday, October 5, 2022 at 9:12:25 AM UTC-7 tke...@gmail.com wrote: > Pretty mysterious. I wonder if this is due to using a password instead of > an id key? > > On Wed, Oct 5, 2022 at 8:55 AM Doug Bo wrote: > >> Surprise, surprise I got a reply! >> >> Thank you for reaching out. I checked the information we have for your >> station, and it looks like it went down when we turned off the old >> infrastructure. So the station is hanging on to something it ought not. >> >> The best thing to do is to reboot/reset/power cycle everything from the >> instrument itself to the internet, including your router if you can. That >> should insure a fresh connection to us. >> >> Please let me know if you don’t see data again on the PWS dashboard >> within about 20-30 minutes after finishing the reset. >> >> >> >> >> On Wednesday, October 5, 2022 at 8:50:00 AM UTC-7 David Barto wrote: >> >>> > On Oct 5, 2022, at 8:44 AM, Doug Bo wrote: >>> > >>> > Anyone else having problems with Weather Underground again? >>> > >>> > Wunderground-RF: Failed to publish record >>> > Wunderground-RF: Failed to publish record >>> > Wunderground-RF: Failed to publish record >>> > >>> > I sent WU a message but this is the same station that is missing the >>> pressure reading on their app but pressure appears just fine on the web. No >>> response on that issue. Sigh, remember when WU just worked as intended? LOL >>> > >>> > Doug B. >>> > >>> >>> Yes, I noticed this AM that WU stopped updating. >>> >>> Sigh, again. >>> >>> David >>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/c8bd9df6-a8be-4681-a7a6-3a7ef3503da2n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/c8bd9df6-a8be-4681-a7a6-3a7ef3503da2n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/6f801f90-2d60-48a2-9a61-f69b239fbb8bn%40googlegroups.com.
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
Thanks Tom & David Guess I'm going to upgrade to the latest & greatest. :) Stand by... Doug B. On Wednesday, October 5, 2022 at 10:01:39 AM UTC-7 tke...@gmail.com wrote: > V3.9.2 switched from using http to https. That could definitely be the > issue. > > On Wed, Oct 5, 2022 at 9:39 AM David Barto wrote: > >> I’m on 3.9.1 and am seeing the failure to publish as well. Mine started >> as the first update after midnight on Oct 5. So they changed something at >> their end, as I was asleep at that time. >> >> Just restarted everything based on the earlier email to the list, no >> success (and I didn’t expect it either). >> >> David >> >> >> On Oct 5, 2022, at 9:16 AM, Doug Bo wrote: >> >> Turned on weewx debugging ... >> >> Oct 5 09:12:39 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >> upload attempt 1: >> Oct 5 09:12:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >> to publish record 2022-10-05 09:11:39 PDT (1664986299): Failed upload after >> 1 tries >> Oct 5 09:13:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >> upload attempt 1: >> Oct 5 09:13:49 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >> to publish record 2022-10-05 09:12:44 PDT (1664986364): Failed upload after >> 1 tries >> >> Maybe version 3.9.1 has the old URL? >> >> Which is odd, my other 3.9.1 station is running just fine. >> >> Also I switched from the old password method to the ID key. No change, >> still broken. >> >> Doug B. >> >> On Wednesday, October 5, 2022 at 9:12:25 AM UTC-7 tke...@gmail.com wrote: >> >>> Pretty mysterious. I wonder if this is due to using a password instead >>> of an id key? >>> >>> On Wed, Oct 5, 2022 at 8:55 AM Doug Bo wrote: >>> >>>> Surprise, surprise I got a reply! >>>> >>>> Thank you for reaching out. I checked the information we have for your >>>> station, and it looks like it went down when we turned off the old >>>> infrastructure. So the station is hanging on to something it ought not. >>>> >>>> The best thing to do is to reboot/reset/power cycle everything from the >>>> instrument itself to the internet, including your router if you can. That >>>> should insure a fresh connection to us. >>>> >>>> Please let me know if you don’t see data again on the PWS dashboard >>>> within about 20-30 minutes after finishing the reset. >>>> >>>> >>>> >>>> >>>> On Wednesday, October 5, 2022 at 8:50:00 AM UTC-7 David Barto wrote: >>>> >>>>> > On Oct 5, 2022, at 8:44 AM, Doug Bo wrote: >>>>> > >>>>> > Anyone else having problems with Weather Underground again? >>>>> > >>>>> > Wunderground-RF: Failed to publish record >>>>> > Wunderground-RF: Failed to publish record >>>>> > Wunderground-RF: Failed to publish record >>>>> > >>>>> > I sent WU a message but this is the same station that is missing the >>>>> pressure reading on their app but pressure appears just fine on the web. >>>>> No >>>>> response on that issue. Sigh, remember when WU just worked as intended? >>>>> LOL >>>>> > >>>>> > Doug B. >>>>> > >>>>> >>>>> Yes, I noticed this AM that WU stopped updating. >>>>> >>>>> Sigh, again. >>>>> >>>>> David >>>>> >>>>> >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to weewx-user+...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/weewx-user/c8bd9df6-a8be-4681-a7a6-3a7ef3503da2n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/weewx-user/c8bd9df6-a8be-4681-a7a6-3a7ef3503da2n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
Updated to v4.8 and still receiving the same error... Oct 5 11:08:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: Wunderground-RF: Failed upload attempt 1: Oct 5 11:08:41 raspberrypi2 weewx[3430] ERROR weewx.restx: Wunderground-RF: Failed to publish record 2022-10-05 11:07:41 PDT (1664993261): Failed upload after 1 tries Oct 5 11:09:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: Wunderground-RF: Failed upload attempt 1: Oct 5 11:09:41 raspberrypi2 weewx[3430] ERROR weewx.restx: Wunderground-RF: Failed to publish record 2022-10-05 11:08:40 PDT (1664993320): Failed upload after 1 tries Guess I'll reboot the router and see if that helps. My remaining 3.9.1 station is running fine, even with the old password. Go figure. LOL Doug B. On Wednesday, October 5, 2022 at 10:39:06 AM UTC-7 Doug Bo wrote: > Thanks Tom & David > > Guess I'm going to upgrade to the latest & greatest. :) > > Stand by... > > Doug B. > > > On Wednesday, October 5, 2022 at 10:01:39 AM UTC-7 tke...@gmail.com wrote: > >> V3.9.2 switched from using http to https. That could definitely be the >> issue. >> >> On Wed, Oct 5, 2022 at 9:39 AM David Barto wrote: >> >>> I’m on 3.9.1 and am seeing the failure to publish as well. Mine started >>> as the first update after midnight on Oct 5. So they changed something at >>> their end, as I was asleep at that time. >>> >>> Just restarted everything based on the earlier email to the list, no >>> success (and I didn’t expect it either). >>> >>> David >>> >>> >>> On Oct 5, 2022, at 9:16 AM, Doug Bo wrote: >>> >>> Turned on weewx debugging ... >>> >>> Oct 5 09:12:39 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >>> upload attempt 1: >>> Oct 5 09:12:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >>> to publish record 2022-10-05 09:11:39 PDT (1664986299): Failed upload after >>> 1 tries >>> Oct 5 09:13:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >>> upload attempt 1: >>> Oct 5 09:13:49 raspberrypi2 weewx[1601]: restx: Wunderground-RF: Failed >>> to publish record 2022-10-05 09:12:44 PDT (1664986364): Failed upload after >>> 1 tries >>> >>> Maybe version 3.9.1 has the old URL? >>> >>> Which is odd, my other 3.9.1 station is running just fine. >>> >>> Also I switched from the old password method to the ID key. No change, >>> still broken. >>> >>> Doug B. >>> >>> On Wednesday, October 5, 2022 at 9:12:25 AM UTC-7 tke...@gmail.com >>> wrote: >>> >>>> Pretty mysterious. I wonder if this is due to using a password instead >>>> of an id key? >>>> >>>> On Wed, Oct 5, 2022 at 8:55 AM Doug Bo wrote: >>>> >>>>> Surprise, surprise I got a reply! >>>>> >>>>> Thank you for reaching out. I checked the information we have for >>>>> your station, and it looks like it went down when we turned off the old >>>>> infrastructure. So the station is hanging on to something it ought not. >>>>> >>>>> The best thing to do is to reboot/reset/power cycle everything from >>>>> the instrument itself to the internet, including your router if you can. >>>>> That should insure a fresh connection to us. >>>>> >>>>> Please let me know if you don’t see data again on the PWS dashboard >>>>> within about 20-30 minutes after finishing the reset. >>>>> >>>>> >>>>> >>>>> >>>>> On Wednesday, October 5, 2022 at 8:50:00 AM UTC-7 David Barto wrote: >>>>> >>>>>> > On Oct 5, 2022, at 8:44 AM, Doug Bo wrote: >>>>>> > >>>>>> > Anyone else having problems with Weather Underground again? >>>>>> > >>>>>> > Wunderground-RF: Failed to publish record >>>>>> > Wunderground-RF: Failed to publish record >>>>>> > Wunderground-RF: Failed to publish record >>>>>> > >>>>>> > I sent WU a message but this is the same station that is missing >>>>>> the pressure reading on their app but pressure appears just fine on the >>>>>> web. No response on that issue. Sigh, remember when WU just worked as >>>>>> intended? LOL >>>>>> > >>>>>
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
Reboot of the router seems to have fixed the issue. Weird. Thanks all, Doug B. On Wednesday, October 5, 2022 at 11:47:15 AM UTC-7 Doug Bo wrote: > Updated to v4.8 and still receiving the same error... > > Oct 5 11:08:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: > Wunderground-RF: Failed upload attempt 1: > Oct 5 11:08:41 raspberrypi2 weewx[3430] ERROR weewx.restx: > Wunderground-RF: Failed to publish record 2022-10-05 11:07:41 PDT > (1664993261): Failed upload after 1 tries > Oct 5 11:09:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: > Wunderground-RF: Failed upload attempt 1: > Oct 5 11:09:41 raspberrypi2 weewx[3430] ERROR weewx.restx: > Wunderground-RF: Failed to publish record 2022-10-05 11:08:40 PDT > (1664993320): Failed upload after 1 tries > > Guess I'll reboot the router and see if that helps. My remaining 3.9.1 > station is running fine, even with the old password. Go figure. LOL > > Doug B. > > > On Wednesday, October 5, 2022 at 10:39:06 AM UTC-7 Doug Bo wrote: > >> Thanks Tom & David >> >> Guess I'm going to upgrade to the latest & greatest. :) >> >> Stand by... >> >> Doug B. >> >> >> On Wednesday, October 5, 2022 at 10:01:39 AM UTC-7 tke...@gmail.com >> wrote: >> >>> V3.9.2 switched from using http to https. That could definitely be the >>> issue. >>> >>> On Wed, Oct 5, 2022 at 9:39 AM David Barto wrote: >>> >>>> I’m on 3.9.1 and am seeing the failure to publish as well. Mine started >>>> as the first update after midnight on Oct 5. So they changed something at >>>> their end, as I was asleep at that time. >>>> >>>> Just restarted everything based on the earlier email to the list, no >>>> success (and I didn’t expect it either). >>>> >>>> David >>>> >>>> >>>> On Oct 5, 2022, at 9:16 AM, Doug Bo wrote: >>>> >>>> Turned on weewx debugging ... >>>> >>>> Oct 5 09:12:39 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>> Failed upload attempt 1: >>>> Oct 5 09:12:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>> Failed to publish record 2022-10-05 09:11:39 PDT (1664986299): Failed >>>> upload after 1 tries >>>> Oct 5 09:13:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>> Failed upload attempt 1: >>>> Oct 5 09:13:49 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>> Failed to publish record 2022-10-05 09:12:44 PDT (1664986364): Failed >>>> upload after 1 tries >>>> >>>> Maybe version 3.9.1 has the old URL? >>>> >>>> Which is odd, my other 3.9.1 station is running just fine. >>>> >>>> Also I switched from the old password method to the ID key. No change, >>>> still broken. >>>> >>>> Doug B. >>>> >>>> On Wednesday, October 5, 2022 at 9:12:25 AM UTC-7 tke...@gmail.com >>>> wrote: >>>> >>>>> Pretty mysterious. I wonder if this is due to using a password instead >>>>> of an id key? >>>>> >>>>> On Wed, Oct 5, 2022 at 8:55 AM Doug Bo wrote: >>>>> >>>>>> Surprise, surprise I got a reply! >>>>>> >>>>>> Thank you for reaching out. I checked the information we have for >>>>>> your station, and it looks like it went down when we turned off the old >>>>>> infrastructure. So the station is hanging on to something it ought not. >>>>>> >>>>>> The best thing to do is to reboot/reset/power cycle everything from >>>>>> the instrument itself to the internet, including your router if you can. >>>>>> That should insure a fresh connection to us. >>>>>> >>>>>> Please let me know if you don’t see data again on the PWS dashboard >>>>>> within about 20-30 minutes after finishing the reset. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Wednesday, October 5, 2022 at 8:50:00 AM UTC-7 David Barto wrote: >>>>>> >>>>>>> > On Oct 5, 2022, at 8:44 AM, Doug Bo wrote: >>>>>>> > >>>>>>> > Anyone else having problems with Weather Underground again? >>>>>>> > >>>>>>> > Wunderground-RF: Failed to
[weewx-user] WU App and missing barometric pressure
Confirmed with WU support, finally. Certain stations are missing the barometric pressure in the Weather Underground app thus preventing you from adding the station to your favorites. This is a bug in the WU app. The pressure appears on the web and of course shows up properly on weewx generated pages. :) Big thanks to Tom & the team for wonderful software. Doug B. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/de2f5997-f459-4306-8a2d-f4e5e6090011n%40googlegroups.com.
Re: [weewx-user] WUnderground not publishing again (Oct 4, 2022)
My only thoughts are to turn on debugging and/or upgrade weewx. Doug B. On Sunday, October 9, 2022 at 7:57:36 AM UTC-7 David Barto wrote: > So I finally got around to rebooting my router and restarting weewx, and > nothing. Still offline. > > David > > On Oct 5, 2022, at 12:33 PM, Doug Bo wrote: > > Reboot of the router seems to have fixed the issue. Weird. > > Thanks all, > Doug B. > > > On Wednesday, October 5, 2022 at 11:47:15 AM UTC-7 Doug Bo wrote: > >> Updated to v4.8 and still receiving the same error... >> >> Oct 5 11:08:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: >> Wunderground-RF: Failed upload attempt 1: >> Oct 5 11:08:41 raspberrypi2 weewx[3430] ERROR weewx.restx: >> Wunderground-RF: Failed to publish record 2022-10-05 11:07:41 PDT >> (1664993261): Failed upload after 1 tries >> Oct 5 11:09:41 raspberrypi2 weewx[3430] DEBUG weewx.restx: >> Wunderground-RF: Failed upload attempt 1: >> Oct 5 11:09:41 raspberrypi2 weewx[3430] ERROR weewx.restx: >> Wunderground-RF: Failed to publish record 2022-10-05 11:08:40 PDT >> (1664993320): Failed upload after 1 tries >> >> Guess I'll reboot the router and see if that helps. My remaining 3.9.1 >> station is running fine, even with the old password. Go figure. LOL >> >> Doug B. >> >> >> On Wednesday, October 5, 2022 at 10:39:06 AM UTC-7 Doug Bo wrote: >> >>> Thanks Tom & David >>> >>> Guess I'm going to upgrade to the latest & greatest. :) >>> >>> Stand by... >>> >>> Doug B. >>> >>> >>> On Wednesday, October 5, 2022 at 10:01:39 AM UTC-7 tke...@gmail.com >>> wrote: >>> >>>> V3.9.2 switched from using http to https. That could definitely be the >>>> issue. >>>> >>>> On Wed, Oct 5, 2022 at 9:39 AM David Barto wrote: >>>> >>>>> I’m on 3.9.1 and am seeing the failure to publish as well. Mine >>>>> started as the first update after midnight on Oct 5. So they changed >>>>> something at their end, as I was asleep at that time. >>>>> >>>>> Just restarted everything based on the earlier email to the list, no >>>>> success (and I didn’t expect it either). >>>>> >>>>> David >>>>> >>>>> >>>>> On Oct 5, 2022, at 9:16 AM, Doug Bo wrote: >>>>> >>>>> Turned on weewx debugging ... >>>>> >>>>> Oct 5 09:12:39 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>>> Failed upload attempt 1: >>>>> Oct 5 09:12:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>>> Failed to publish record 2022-10-05 09:11:39 PDT (1664986299): Failed >>>>> upload after 1 tries >>>>> Oct 5 09:13:44 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>>> Failed upload attempt 1: >>>>> Oct 5 09:13:49 raspberrypi2 weewx[1601]: restx: Wunderground-RF: >>>>> Failed to publish record 2022-10-05 09:12:44 PDT (1664986364): Failed >>>>> upload after 1 tries >>>>> >>>>> Maybe version 3.9.1 has the old URL? >>>>> >>>>> Which is odd, my other 3.9.1 station is running just fine. >>>>> >>>>> Also I switched from the old password method to the ID key. No >>>>> change, still broken. >>>>> >>>>> Doug B. >>>>> >>>>> On Wednesday, October 5, 2022 at 9:12:25 AM UTC-7 tke...@gmail.com >>>>> wrote: >>>>> >>>>>> Pretty mysterious. I wonder if this is due to using a password >>>>>> instead of an id key? >>>>>> >>>>>> On Wed, Oct 5, 2022 at 8:55 AM Doug Bo wrote: >>>>>> >>>>>>> Surprise, surprise I got a reply! >>>>>>> >>>>>>> Thank you for reaching out. I checked the information we have for >>>>>>> your station, and it looks like it went down when we turned off the old >>>>>>> infrastructure. So the station is hanging on to something it ought not. >>>>>>> >>>>>>> The best thing to do is to reboot/reset/power cycle everything from >>>>>>> the instrument itself to the internet, including your router if you >>>>>>> can. >>>>>>> That should insure a fresh connection to u
[weewx-user] Re: weewx alerting
Funny, I was just thinking I need a script to monitor weewx remote
installs. Thanks!
Doug B.
On Saturday, May 13, 2023 at 11:40:14 AM UTC-7 vince wrote:
> I always recommend a standalone external program called occasionally by
> cron as the simplest way to do these kinds of things.
>
> Here's a quickie script in bash as an example
>
> #!/bin/bash
> # max time since last record in seconds
> maxDifference=3600
>
> # timestamp of the last record in the db
> lastTimestamp=`echo "select dateTime from archive order by dateTime desc
> limit 1;" | sqlite3 weewx.sdb`
>
> # current timestamp
> now=`date +%s`
>
> # difference in timestamps
> declare -i delta=${now}-${lastTimestamp}
>
> # print it out
> echo "lastTimestamp=${lastRecord} now=${now} delta=${delta}"
> if test ${delta} -gt ${maxDifference}
> then
> echo "too long since last record"
> # put something here to syslog and/or email
> else
> echo "last record check within limits"
> fi
>
> On Friday, May 12, 2023 at 7:42:35 PM UTC-7 Ryan Stasel wrote:
>
>> Hey All,
>>
>> Is there a way to have WeeWX send email alerts for when it hasn’t
>> received data from the station after X amount of time? My Weatherlink seems
>> to have gone offline a few days ago (network dropped, but kept logging data
>> thankfully), but I didn’t notice until now.
>>
>> Is there an option to have it alert? I see alarming for weather
>> conditions here:
>> https://github.com/weewx/weewx/blob/master/examples/alarm.py but not
>> really anything for “I haven’t gotten any data for X time, or “station has
>> gone offline””
>>
>> Thanks!
>>
>> -Ryan Stasel
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/20e38ba4-3e92-4a2f-a27a-0b2280080980n%40googlegroups.com.
