[weewx-user] Re: Sun Shine Hours

[Phil Owers]

Thanks Gary
That worked ok to a temp field but then I realised that I had added a new 
field to the weewx.sdb.
I have 4 conf files working on the same rasp pi and the sun console has its 
own database.
Just wondered how thats done.
Thanks
Phil

On Saturday, July 25, 2020 at 5:39:58 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> Have been using the Instromet Stand Alone Sun Duration sensor which if 
> connected to a Davis Vantage Pro2 system needs to go to a spare rain socket 
> in the ISS.
> Each 0.01 is equivalent to 36 seconds of sunshine and I have converted 
> that to hours and minutes on my web page. 
> The next stage was to produce a graph per hour using the rain field in the 
> database  and to adjust that  reading.either with another field in the 
> database or when the plot/graph was produced .
> I did have a look in the vantage.py and came across  loop_packet['rain'] = 
> delta. 
> So im asking is this the place to do this or am I totally in the wrong 
> place to achieve a field with with rain * 36 in.
> Thanks in Advance
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1cf3e00e-4327-47f2-996a-f731237f1ae3o%40googlegroups.com.

[weewx-user] Re: Sun Shine Hours

[Phil Owers]

Hi Gary
Thanks for your quick response.
You have confirmed the best way is to populate a new field to get the graph 
Im looking for.
Im happy with adding a new field to the database
This new field would have the 0.01 * 36 but im not sure how to do that
Is that done in the vantage.py file, and if so how please, or somewhere else
Phil


On Saturday, July 25, 2020 at 5:39:58 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> Have been using the Instromet Stand Alone Sun Duration sensor which if 
> connected to a Davis Vantage Pro2 system needs to go to a spare rain socket 
> in the ISS.
> Each 0.01 is equivalent to 36 seconds of sunshine and I have converted 
> that to hours and minutes on my web page. 
> The next stage was to produce a graph per hour using the rain field in the 
> database  and to adjust that  reading.either with another field in the 
> database or when the plot/graph was produced .
> I did have a look in the vantage.py and came across  loop_packet['rain'] = 
> delta. 
> So im asking is this the place to do this or am I totally in the wrong 
> place to achieve a field with with rain * 36 in.
> Thanks in Advance
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/cdd0c7e8-a905-4e7d-9cc9-c0216d0641f8o%40googlegroups.com.

[weewx-user] Sun Shine Hours

[Phil Owers]

Hi All

Have been using the Instromet Stand Alone Sun Duration sensor which if 
connected to a Davis Vantage Pro2 system needs to go to a spare rain socket 
in the ISS.
Each 0.01 is equivalent to 36 seconds of sunshine and I have converted that 
to hours and minutes on my web page. 
The next stage was to produce a graph per hour using the rain field in the 
database  and to adjust that  reading.either with another field in the 
database or when the plot/graph was produced .
I did have a look in the vantage.py and came across  loop_packet['rain'] = 
delta. 
So im asking is this the place to do this or am I totally in the wrong 
place to achieve a field with with rain * 36 in.
Thanks in Advance

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e7cbf097-2b2d-412c-b84f-86df450613c9o%40googlegroups.com.

[weewx-user] Re: UKMO moving from datapoint to datahub

[Phil Owers]

Yes it would be the forecast extension

On Wednesday, July 15, 2020 at 3:23:34 PM UTC+1, Phil Owers wrote:
>
> UK met office is moving to DataHub at some stage so wondered if anybody 
> had got it to work. From my first looks it appears it uses latitude and 
> longitude instead of Location
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/64927458-a8b4-456d-a13f-64f164d32013o%40googlegroups.com.

[weewx-user] UKMO moving from datapoint to datahub

[Phil Owers]

UK met office is moving to DataHub at some stage so wondered if anybody had 
got it to work. From my first looks it appears it uses latitude and 
longitude instead of Location
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2751eddc-0b42-4f46-ad3d-918902b25fb4o%40googlegroups.com.

Re: [weewx-user] Re: Forecast Xtide

[Phil Owers]

In forecast.py under def xtides there is a max_events = 45. Changing that
to a higher number has sorted my problem, however you may well tell me that
could upset something.
Phil

On Thu, 4 Jun 2020, 16:10 Phil Owers,  wrote:

> Hi Mathew
> Sorry I need your help again
> Im trying to display at least 3 months of tide time data
>
> Jun  4 15:32:12 raspberrypi weewx[9290] INFO user.forecast: MainThread:
> XTide: forecast version 3.4.0b1
> Jun  4 15:32:12 raspberrypi weewx[9290] INFO user.forecast: MainThread:
> XTide: interval=86400 max_age=2419200 location='Cromer, England'
> duration=864
> The above log has the data in the database and have confirmed by looking
> at the XTide first and last entry.
> By using
> #set $tides = $forecast.xtides
> #if len($tides) > 0
>   #for $tide in $tides
> $tide.event_ts $tide.hilo $tide.offset
>   #end for
> I can only get 12 days displayed so I decided to see what this displayed
> #set $periods = $forecast.weather_periods('XTide', max_events=100)
>   #for $period in $periods
>   $period.event_ts $period.hilo
>   #end for
> It worked but only up to 54 events and refused to go any further
> So what am I doing wrong.
> Thanks in advance
> Phil
>
>
> On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>>
>> Hi
>> Using the tide.html.tmpl that is associated with
>> weewx-forecast-master.zip it displays 12 days ish of tide times
>> Im trying to increase this to a month or even longer. The times in the
>> forecast.sdb are for about a month
>> Just wondered how I could display further than 12 days.
>> Thanks for any help
>> Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/03a35cca-2c4d-4127-a1d1-5e4b78c0ad75%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/03a35cca-2c4d-4127-a1d1-5e4b78c0ad75%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pP_W5DYviLYOAKtaDAk88Nkk5Ek867B%2BYEm2BKKSNzsjA%40mail.gmail.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Hi Mathew
Sorry I need your help again
Im trying to display at least 3 months of tide time data

Jun  4 15:32:12 raspberrypi weewx[9290] INFO user.forecast: MainThread: 
XTide: forecast version 3.4.0b1
Jun  4 15:32:12 raspberrypi weewx[9290] INFO user.forecast: MainThread: 
XTide: interval=86400 max_age=2419200 location='Cromer, England' 
duration=864
The above log has the data in the database and have confirmed by looking at 
the XTide first and last entry.
By using
#set $tides = $forecast.xtides
#if len($tides) > 0
  #for $tide in $tides
$tide.event_ts $tide.hilo $tide.offset
  #end for
I can only get 12 days displayed so I decided to see what this displayed 
#set $periods = $forecast.weather_periods('XTide', max_events=100)
  #for $period in $periods
  $period.event_ts $period.hilo
  #end for
It worked but only up to 54 events and refused to go any further
So what am I doing wrong.
Thanks in advance
Phil


On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/03a35cca-2c4d-4127-a1d1-5e4b78c0ad75%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Took a while for the penny to drop but now  realise they go in the 
weewx.conf file. 
Still cant display more than 12 days with the previous method but using the 
following method

#set $periods = $forecast.weather_periods('XTide', max_events=50)
  #for $period in $periods
  $period.event_ts $period.hilo
  #end for

I can get anything I wont displayed.

Phil

On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d74b3491-35bf-47c1-bc49-ab25faa97979%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

>From the logs

Jun  3 00:05:16 raspberrypi weewx[15036] INFO user.forecast: MainThread: 
XTide: forecast version 3.4.0b1
Jun  3 00:05:16 raspberrypi weewx[15036] INFO user.forecast: MainThread: 
XTide: interval=1728000 max_age=2419200 location='Cromer, England' 
duration=3456000

Jun  3 00:10:15 raspberrypi weewx[15036] INFO user.forecast: XTideThread: 
XTide: generating tides from 2020-06-03 00:00:00 BST (1591138800) to 
2020-07-13 00:00:00 BST (1594594800)
Jun  3 00:10:15 raspberrypi weewx[15036] INFO user.forecast: 
ZambrettiThread: Zambretti: generated 1 forecast record
Jun  3 00:10:15 raspberrypi weewx[15036] INFO user.forecast: UKMOThread: 
UKMO: got 34 forecast records
Jun  3 00:10:15 raspberrypi weewx[15036] INFO user.forecast: XTideThread: 
XTide: saved 154 forecast records
Jun  3 00:10:16 raspberrypi weewx[15036] INFO user.forecast: XTideThread: 
XTide: deleted forecasts prior to 1588720215

Duration is 3456000 with the interval set at 1728000 (20 days) so shouldn't 
that display 20 days, I cant get it any further than 12 days.

To clear one thing up 
[Forecast]
  [[XTide]]
location = Boston
interval = 1209600 # how often to generate forecast. default is 14 days
duration = 2419200 # how far in future to forecast. default is 28 days
max_age = 2419200 # how long to keep each forecast
Where should this go please as Im changing the values in forecast.py where 
I couldn't find DURATION
Sorry to be a pain
Phil



On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e4e78a67-adef-49ac-93dc-744131023270%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Thanks Mathew
By changing the interval and deleting the database I can now change whats 
displayed
Interval = 86400 displays jun3 to jun4
Interval = 864000 gives a display of Jun3rd to Jun14
However changing the interval to anything higher  say 20 days (1728000) 
makes no difference and I did delete the database twice .
When you start weewx the log shows 
Xtide interval=1728000 max_age=2419200 duration=3456000
Xtide thread getting tides for 3/6/2020 to 13/7/2020
Im changing the parameters interval and max_age is also there but I cant 
find duration so Im wondering where that is.
weewx is ver 4.1

On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a550f42e-c18d-43d6-91c2-ad64dbe3af2e%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Whatever I change It still only displays 12 days
Any help will be appreciated
Thanks Phil


On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/89c8d7ee-2653-485f-bafd-c0255bc52f6f%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Sorry I had set the interval to 86400.

On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4a2c37d3-6301-47e5-9721-8790fb286d1d%40googlegroups.com.

[weewx-user] Re: Forecast Xtide

[Phil Owers]

Thanks for the quick reply
Ive checked that Im using
#set $tides = $forecast.xtides
#if len($tides) > 0
  #for $tide in $tides
$tide.event_ts $tide.hilo $tide.offset
  #end for
and the interval and duration are set to the default
Ive check that in the forecast.sdb has tide times that go to June28
The page gets updated every 10 mins and the first tide is June 2 16:18 but 
the last time is June 14th
When the first time is reached that goes and a new date gets added to the 
end
.I cant get it to go any further. than 12 days
Phil

On Tuesday, June 2, 2020 at 1:18:55 PM UTC+1, Phil Owers wrote:
>
> Hi
> Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
> it displays 12 days ish of tide times
> Im trying to increase this to a month or even longer. The times in the 
> forecast.sdb are for about a month 
> Just wondered how I could display further than 12 days.
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/9bab27e2-d31a-40e5-8bf1-77d6d8ff%40googlegroups.com.

[weewx-user] Forecast Xtide

[Phil Owers]

Hi
Using the tide.html.tmpl that is associated with weewx-forecast-master.zip 
it displays 12 days ish of tide times
Im trying to increase this to a month or even longer. The times in the 
forecast.sdb are for about a month 
Just wondered how I could display further than 12 days.
Thanks for any help
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/106ee85c-bf74-4de7-9b97-2e0951e3b676%40googlegroups.com.

[weewx-user] Re: Forecast End of Month Date out of Order

[Phil Owers]

In forecast_strip.inc line 564   is
#set $thisdate = $period.event_ts.format('%Y.%m.%d') which is OK
If I change it to
  #set $thisdate = $period.event_ts.format('%m.%d')  is OK
If I change it to
  #set $thisdate = $period.event_ts.format('%b.%d') it puts the new month 
first so doesn't work.
So Im assuming I have to change the date appearance in probably the 
weewx.conf


On Friday, May 29, 2020 at 9:56:21 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Just wondered if anybody else has seen this, It may well have started 
> after the we had a time change in March
> as I seem to remember something similar at the end of Mar and also April 
> but didn't have the time to investigate.
> It appears that when a new month is displayed it is displayed before the 
> last days of the old month
> Have a look at 
> http://sheringhamweather.ddns.net/forecast/3dayforecast.html it will 
> explain it better
> Once in the new month all is OK , until the end of the month.
> You will see that I have added a couple of things to the display so its 
> probably something I have caused and I have tried on different browsers 
> Phil
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/5affa6df-b32a-4b84-b81f-38fb818caa85%40googlegroups.com.

[weewx-user] Re: Forecast End of Month Date out of Order

[Phil Owers]

It appears that the date is not sync up with the forecast info. The 
forecast info from the time (22h etc) and everything underneath is correct 
and in the time correct order beginning with the next time slot.
Could somebody explain please how the Mon Jun 01, Sat May 30 and Sun May 31 
is sync up to the rest of the display as this seems to be the problem.
Reading from the left the first time 22h is in fact Fri May 30 and not Mon 
Jun 01.
Thanks for any help
Phil

On Friday, May 29, 2020 at 9:56:21 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Just wondered if anybody else has seen this, It may well have started 
> after the we had a time change in March
> as I seem to remember something similar at the end of Mar and also April 
> but didn't have the time to investigate.
> It appears that when a new month is displayed it is displayed before the 
> last days of the old month
> Have a look at 
> http://sheringhamweather.ddns.net/forecast/3dayforecast.html it will 
> explain it better
> Once in the new month all is OK , until the end of the month.
> You will see that I have added a couple of things to the display so its 
> probably something I have caused and I have tried on different browsers 
> Phil
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/795dc05f-49f5-42b9-aabf-bf80d011f23a%40googlegroups.com.

[weewx-user] Forecast End of Month Date out of Order

[Phil Owers]

Hi Guys
Just wondered if anybody else has seen this, It may well have started after 
the we had a time change in March
as I seem to remember something similar at the end of Mar and also April 
but didn't have the time to investigate.
It appears that when a new month is displayed it is displayed before the 
last days of the old month
Have a look at http://sheringhamweather.ddns.net/forecast/3dayforecast.html 
it will explain it better
Once in the new month all is OK , until the end of the month.
You will see that I have added a couple of things to the display so its 
probably something I have caused and I have tried on different browsers 
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fec5e61c-3fdb-4af7-93d6-31708a50e273%40googlegroups.com.

[weewx-user] Re: Database Problem

[Phil Owers]

Sorry Im a little confused here.
If as an example you tried to add something new into weewx.sdb by using
import schemas.wview
schema_extended = schemas.wview.schema + [('whateveryoulikehere', 'REAL')]
in the extension.py file
with
 manager = weewx.manager.DaySummaryManager
I can see people falling into a bit of a black hole as looking back in the 
logs 
May 27 20:10:16 raspberrypi weewx[1464] ERROR weewx.cheetahgenerator: 
File "_home_weewx_skins_Standard_NOAA_NOAA__Y_txt_tmpl.py", line 
862, in respond
May 27 20:10:16 raspberrypi weewx[1464] ERROR weewx.cheetahgenerator:   
NameMapper.NotFound: cannot find 'count' while searching for 
'month.wind.count.raw'
and it didn't like  $day.wind.max from $day.wind.gustdir.ordinal_compass at 
$day.wind.maxtime  
So how can you add to weewx.sdb without it changing the structure and 
causing these errors 
Phil

On Thursday, May 28, 2020 at 12:06:30 AM UTC+1, Phil Owers wrote:
>
> Have just tried to add avg_distance and lightning_strikes to the 
> weewx.sdb. schema by adding
> import schemas.wview
> schema_extended = schemas.wview.schema + [('avg_distance', 
> 'REAL'),('lightning_strikes', 'REAL')]
> in the extension.py file
> and in the weewx.conf
>  changed schema = schemas.wview_extended.schema
>  to schema = user.extensions.schema_extended
> then
> sudo ./bin/wee_database weewx.conf --reconfigure
>
> The new weewx.sdb was produced and so I then did --rebuild-daily.
> Restarted weewx and started getting a failure with $day.wind.max and also 
> the following was produced in the log with 
> May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread: 
>  data = self.calculate(cached_packet)
> May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:    
> File "/home/weewx/bin/user/rtgd.py", line 1926, in calculate
> May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread: 
>  wgust_tm_vt = ValueTuple(self.day_stats['wind'].max,
> May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:  
> KeyError: 'wind'
>
> Had a look at the old and new weew.sdb and in the database file structure 
> the tables had gone from 114 Table Schema in the original to 54 Table 
> Schema after I had done the above change with daily_archive_wind missing 
> with lots of others.
> Reverted back to the original weewx.sdb and it was Ok again.
> Im using weewx Ver 4.1
> Just wondered if there was a different way of doing the above since 
> version 4
> Thanks for any help
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a83fb07a-a361-42d2-9927-9318db92dc01%40googlegroups.com.

[weewx-user] Database Problem

[Phil Owers]

Have just tried to add avg_distance and lightning_strikes to the weewx.sdb. 
schema by adding
import schemas.wview
schema_extended = schemas.wview.schema + [('avg_distance', 
'REAL'),('lightning_strikes', 'REAL')]
in the extension.py file
and in the weewx.conf
 changed schema = schemas.wview_extended.schema
 to schema = user.extensions.schema_extended
then
sudo ./bin/wee_database weewx.conf --reconfigure

The new weewx.sdb was produced and so I then did --rebuild-daily.
Restarted weewx and started getting a failure with $day.wind.max and also 
the following was produced in the log with 
May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:  
data = self.calculate(cached_packet)
May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:    
File "/home/weewx/bin/user/rtgd.py", line 1926, in calculate
May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:  
wgust_tm_vt = ValueTuple(self.day_stats['wind'].max,
May 27 19:20:11 raspberrypi weewx[529] INFO user.rtgd: rtgdthread:  
KeyError: 'wind'

Had a look at the old and new weew.sdb and in the database file structure 
the tables had gone from 114 Table Schema in the original to 54 Table 
Schema after I had done the above change with daily_archive_wind missing 
with lots of others.
Reverted back to the original weewx.sdb and it was Ok again.
Im using weewx Ver 4.1
Just wondered if there was a different way of doing the above since version 
4
Thanks for any help
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/b4a60685-724e-4260-834e-3589af69dcba%40googlegroups.com.

[weewx-user] Re: Highcharts on Weewx v4

[Phil Owers]

Thanks Gary
To keep every thing in its own sub-directory  I did add HTML_ROOT = 
public_html/highchartaverages in weewx.conf
Cant remember if it was like that before or if I added it.
And thanks again for all your great work, and all others of course
Phil


On Saturday, April 18, 2020 at 7:48:17 PM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> Loaded highcharts onto my weewx v4 machine and it failed
> averagesSearchX.py line 105 which is 
>  except Exception, e:
>
> Just wondered if this was a known problem
>
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bf65d5ce-043b-45e5-b54c-c28d96ddbe44%40googlegroups.com.

[weewx-user] Re: Highcharts on Weewx v4

[Phil Owers]

Hi Gary
Just wondered if you have updated highcharts to work with ver4 /p3 yet
Cheers Phil

On Saturday, April 18, 2020 at 7:48:17 PM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> Loaded highcharts onto my weewx v4 machine and it failed
> averagesSearchX.py line 105 which is 
>  except Exception, e:
>
> Just wondered if this was a known problem
>
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/52bfe440-0429-4f98-81f1-19a8b3ee9772%40googlegroups.com.

[weewx-user] Re: RTGD

[Phil Owers]

After changing a couple of things on my web hosting (under supervision) it 
started producing the gauge-data.txt.
We changed them back one at a time and it still produces the txt file so 
didn't prove anything but it is now working


On Thursday, May 14, 2020 at 3:36:33 PM UTC+1, Phil Owers wrote:
>
> Im trying to set up the HTTP POST.  The gauge-data.txt is being produced 
> as the web site already uses that which gets updated every 10 mins.
> Ive set a gaugedata sub-directory up with post_gauge-data.php in it, but 
> Im not getting a gauge-data.txt file generated.
> In weewx.conf the remote_server_url = 
> http://www.sheringhamweathercentre.uk/gaugedata/post_gauge-data.php but 
> its not generating a gauge-data.txt file
> In the log I get 
> DATA MAY HAVE BEEN POSTED SUCCESFULLY RESPONCE MESSAGE WAS NOT RECEIVED 
> BUT A VALID CODE WAS RECEIVED.
> I was wondering if the PHP 7.4 installed on my web hosting may be the 
> problem, it can be changed but im afraid im guessing here
> Any help would be appreciated 
> Thanks Phil
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/fa5349af-89ad-44c9-8317-5e8c47a80337%40googlegroups.com.

[weewx-user] Re: suggestion for a future release

[Phil Owers]

Silly question time but why can you load it in (at least ) 2 places

On Thursday, May 14, 2020 at 6:06:42 AM UTC+1, Andrew Milner wrote:
>
> I have seen many posts where there has been confusion or doubt as to how 
> weewx has been installed or updated.  As a suggestion would it not be good 
> idea for this information to be included in weewx.conf together with the 
> version.
> ie if installing or updating via setup.py this is included together with 
> the current version (and ideally the previous version)
> and similarly if using one of the other installes / updaters.
> Just a thought for a future release/update
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a5ec532c-14bc-4127-9de9-7d3c01d9604c%40googlegroups.com.

[weewx-user] RTGD

[Phil Owers]

Im trying to set up the HTTP POST.  The gauge-data.txt is being produced as 
the web site already uses that which gets updated every 10 mins.
Ive set a gaugedata sub-directory up with post_gauge-data.php in it, but Im 
not getting a gauge-data.txt file generated.
In weewx.conf the remote_server_url 
= http://www.sheringhamweathercentre.uk/gaugedata/post_gauge-data.php but 
its not generating a gauge-data.txt file
In the log I get 
DATA MAY HAVE BEEN POSTED SUCCESFULLY RESPONCE MESSAGE WAS NOT RECEIVED BUT 
A VALID CODE WAS RECEIVED.
I was wondering if the PHP 7.4 installed on my web hosting may be the 
problem, it can be changed but im afraid im guessing here
Any help would be appreciated 
Thanks Phil


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4e942db8-7429-402d-80b1-b461fc8a0f25%40googlegroups.com.

Re: [weewx-user] Re: Forecast from UKMO no longer working after upgrade to V4 of weewx

[Phil Owers]

Just leave it. P

On Mon, 4 May 2020, 16:39 Ian Flipp,  wrote:

> Thank you,
>
> That's sorted it :-) Everything now working as expected.
>
> Is there a way of closing the thread or do I just leave it hanging?
>
> Cheers,
> Ian
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/809e0555-7111-463b-b5f1-13748fa27597%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pNUHfdwRX_bQHNs-cdFUr7ik_dQyZdwWMRYndwoXe%3DEVA%40mail.gmail.com.

[weewx-user] Re: Forecast from UKMO no longer working after upgrade to V4 of weewx

[Phil Owers]

Sorry it would help if I attached 
this https://github.com/chaunceygardiner/weewx-forecast

On Monday, May 4, 2020 at 12:37:59 PM UTC+1, Ian Flipp wrote:
>
> Hello everyone,
>
> This is my first post on any forums so if I mess please advise accordingly.
>
> I've been running weewx for many years using the WMR100 driver, the actual 
> station is an oregan scientific from Maplins.  I've always run weewx on a 
> RPi, now running on RPi 4.  Everything has been fine until I upgraded to V4 
> and I noticed the following error in my syslog:
>
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: got 38 
> forecast records
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: saving 38 
> forecast records
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: forecast 
> failure: addRecord() got an unexpected keyword argument 'log_level'
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: terminating 
> thread
>
> I've confirmed that the datapoint key etc are correct by posting the full 
> url into a browser and getting the data back.
>
> It would appear that the problem is when the retrieved data is being 
> written to the database, is this the forecast.py module? or something else.
>
> Any help very much appreciated.
>
> Thanks,
>
> Ian
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1a9c7c51-74be-4a13-83e2-8338934c1580%40googlegroups.com.

[weewx-user] Re: Forecast from UKMO no longer working after upgrade to V4 of weewx

[Phil Owers]

This should help although I seem to remember somebody  saying an upgrade to 
weewx-forcast-3.3.2.tar.gz would be released when weewx V4 was released
Phil

On Monday, May 4, 2020 at 12:37:59 PM UTC+1, Ian Flipp wrote:
>
> Hello everyone,
>
> This is my first post on any forums so if I mess please advise accordingly.
>
> I've been running weewx for many years using the WMR100 driver, the actual 
> station is an oregan scientific from Maplins.  I've always run weewx on a 
> RPi, now running on RPi 4.  Everything has been fine until I upgraded to V4 
> and I noticed the following error in my syslog:
>
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: got 38 
> forecast records
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: saving 38 
> forecast records
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: forecast 
> failure: addRecord() got an unexpected keyword argument 'log_level'
> May  4 12:20:32 backup-pi weewxd: forecast: UKMOThread: UKMO: terminating 
> thread
>
> I've confirmed that the datapoint key etc are correct by posting the full 
> url into a browser and getting the data back.
>
> It would appear that the problem is when the retrieved data is being 
> written to the database, is this the forecast.py module? or something else.
>
> Any help very much appreciated.
>
> Thanks,
>
> Ian
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/81ddc14c-de33-475f-8555-8f9b429af9c5%40googlegroups.com.

[weewx-user] New Installation with V4 with old weewx.sdb

[Phil Owers]

Just wondered  what the preferred method was if you bring old data 
(weewx.sdb) into a new installation with V4
I believe the new weewx.sdb has new fields so  Im assuming wee_import is to 
be used instead of just coping and replacing.
Thanks for some great software and all the time many of you put in
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/651f8d37-8202-4084-92e5-11e78b7a1519%40googlegroups.com.

[weewx-user] Re: Weewx version 4

[Phil Owers]

Sorry Tom you are correct
I didn't know I had a weewx.conf file in etc/weewx/

Sorry if this is a silly question but how can I get it back to using the 
home/weewx/weewx.conf file which it did before. I must have missed 
something in the upgrage
Phil

On Friday, May 1, 2020 at 2:17:12 PM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Just upgraded from v4.0.18b to version 4 and it has stopped weewx
> From the logs 
>
> May  1 14:05:56 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
> May  1 14:05:59 raspberrypi systemd[1]: Starting LSB: weewx weather 
> system...
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Initializing weewx 
> version 4.0.0
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Using Python 3.7.3 
> (default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Platform 
> Linux-4.19.97-v7l+-armv7l-with-debian-10.3
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Locale is 
> 'en_GB.UTF-8'
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: PID file is 
> /var/run/weewx.pid
> May  1 14:05:59 raspberrypi weewx[1140] INFO __main__: Using configuration 
> file /etc/weewx/weewx.conf
> May  1 14:05:59 raspberrypi weewx[1140] INFO weewx.engine: Loading station 
> type Vantage (weewx.drivers.vantage)
> May  1 14:05:59 raspberrypi weewx[1124]: Starting weewx weather system: 
> weewx.
> May  1 14:05:59 raspberrypi systemd[1]: Started LSB: weewx weather system.
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: Caught 
> unrecoverable exception:
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   could 
> not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Traceback (most recent call last):
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewxd", line 148, in main
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> engine = weewx.engine.StdEngine(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 72, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.preLoadServices(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 112, in preLoadServices
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.stn_info = weewx.station.StationInfo(self.console, 
> **config_dict['Station'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/station.py", line 51, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.latitude_f  = float(stn_dict['latitude'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> ValueError: could not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Exiting.
>
> When I look in the weewx.conf file it had the lat an lon figures of 
> 52.9444 and 1.2110
> I changed the values to mine of 52.944 and 1.211 (not sure where the extra 
> digits came from) stopped and restarted weewx but it still fails
> The above is after I changed the weewx.conf file which has
>
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2019 Tom Keffer 
> # See the file LICENSE.txt for your rights.
>
> ##
> # This section is for general configuration information.
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 0
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /home/weewx
> # Whether to log successful operations
> log_success = True
> # Whether to log unsuccessful operations
> log_failure = True
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
> # Do not modify this. It is used when installing and updating weewx.
> version = 4.0.0
>
> ##
> #   This section is for information about the station.
> [Station]
> 
> # Description of the station location
> location = SheringhamWeatherCenter
> 
> # Latitude in decimal degrees. Negative for southern hemisphere
> latitude = 52.944
> # Longitude in decimal degrees. Negative for western hemisphere.
> longitude = 1.211
> 
> # Altitude of the station, with unit it is in. This is downloaded from
> 

[weewx-user] Re: Weewx version 4

[Phil Owers]

Yes the snippet is from the home/weewx/weewx.conf file that Im using
When it first failed the 52.9444 and 1.2110 where in the weewx.conf file 
and not sure where they came from
So I changed them to 52.944 and 1.211 in the weewx.conf file which is what 
they should be
Stopped and started weewx and it still failed with the old figures of 
52.9444 and 1.2110

I have since changed the figures in the weewx.conf file to blanks and also 
to other lat and long figures and have restarted weewx each time.
It doesn't matter what I enter in the weewx.conf file its not reflected in 
the start up log which always has 52.9444 and 1.2110
I have even rebooted the pi on several occasions but the start up log still 
has 52.9444 and 1.2110
Phil

On Friday, May 1, 2020 at 2:17:12 PM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Just upgraded from v4.0.18b to version 4 and it has stopped weewx
> From the logs 
>
> May  1 14:05:56 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
> May  1 14:05:59 raspberrypi systemd[1]: Starting LSB: weewx weather 
> system...
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Initializing weewx 
> version 4.0.0
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Using Python 3.7.3 
> (default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Platform 
> Linux-4.19.97-v7l+-armv7l-with-debian-10.3
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Locale is 
> 'en_GB.UTF-8'
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: PID file is 
> /var/run/weewx.pid
> May  1 14:05:59 raspberrypi weewx[1140] INFO __main__: Using configuration 
> file /etc/weewx/weewx.conf
> May  1 14:05:59 raspberrypi weewx[1140] INFO weewx.engine: Loading station 
> type Vantage (weewx.drivers.vantage)
> May  1 14:05:59 raspberrypi weewx[1124]: Starting weewx weather system: 
> weewx.
> May  1 14:05:59 raspberrypi systemd[1]: Started LSB: weewx weather system.
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: Caught 
> unrecoverable exception:
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   could 
> not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Traceback (most recent call last):
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewxd", line 148, in main
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> engine = weewx.engine.StdEngine(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 72, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.preLoadServices(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 112, in preLoadServices
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.stn_info = weewx.station.StationInfo(self.console, 
> **config_dict['Station'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/station.py", line 51, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.latitude_f  = float(stn_dict['latitude'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> ValueError: could not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Exiting.
>
> When I look in the weewx.conf file it had the lat an lon figures of 
> 52.9444 and 1.2110
> I changed the values to mine of 52.944 and 1.211 (not sure where the extra 
> digits came from) stopped and restarted weewx but it still fails
> The above is after I changed the weewx.conf file which has
>
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2019 Tom Keffer 
> # See the file LICENSE.txt for your rights.
>
> ##
> # This section is for general configuration information.
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 0
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /home/weewx
> # Whether to log successful operations
> log_success = True
> # Whether to log unsuccessful operations
> log_failure = True
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
> # Do not modify this. It is used when installing and updating weewx.
> version = 4.0.0
>
> ##

[weewx-user] Re: Weewx version 4

[Phil Owers]

On Friday, May 1, 2020 at 2:17:12 PM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Just upgraded from v4.0.18b to version 4 and it has stopped weewx
> From the logs 
>
> May  1 14:05:56 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
> May  1 14:05:59 raspberrypi systemd[1]: Starting LSB: weewx weather 
> system...
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Initializing weewx 
> version 4.0.0
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Using Python 3.7.3 
> (default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Platform 
> Linux-4.19.97-v7l+-armv7l-with-debian-10.3
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Locale is 
> 'en_GB.UTF-8'
> May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: PID file is 
> /var/run/weewx.pid
> May  1 14:05:59 raspberrypi weewx[1140] INFO __main__: Using configuration 
> file /etc/weewx/weewx.conf
> May  1 14:05:59 raspberrypi weewx[1140] INFO weewx.engine: Loading station 
> type Vantage (weewx.drivers.vantage)
> May  1 14:05:59 raspberrypi weewx[1124]: Starting weewx weather system: 
> weewx.
> May  1 14:05:59 raspberrypi systemd[1]: Started LSB: weewx weather system.
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: Caught 
> unrecoverable exception:
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   could 
> not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Traceback (most recent call last):
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewxd", line 148, in main
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> engine = weewx.engine.StdEngine(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 72, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.preLoadServices(config_dict)
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/engine.py", line 112, in preLoadServices
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.stn_info = weewx.station.StationInfo(self.console, 
> **config_dict['Station'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: 
> File "/usr/share/weewx/weewx/station.py", line 51, in __init__
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> self.latitude_f  = float(stn_dict['latitude'])
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> ValueError: could not convert string to float: '52.9444 1.2110'
> May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
> Exiting.
>
> When I look in the weewx.conf file it had the lat an lon figures of 
> 52.9444 and 1.2110
> I changed the values to mine of 52.944 and 1.211 (not sure where the extra 
> digits came from) stopped and restarted weewx but it still fails
> The above is after I changed the weewx.conf file which has
>
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2019 Tom Keffer 
> # See the file LICENSE.txt for your rights.
>
> ##
> # This section is for general configuration information.
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 0
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /home/weewx
> # Whether to log successful operations
> log_success = True
> # Whether to log unsuccessful operations
> log_failure = True
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
> # Do not modify this. It is used when installing and updating weewx.
> version = 4.0.0
>
> ##
> #   This section is for information about the station.
> [Station]
> 
> # Description of the station location
> location = SheringhamWeatherCenter
> 
> # Latitude in decimal degrees. Negative for southern hemisphere
> latitude = 52.944
> # Longitude in decimal degrees. Negative for western hemisphere.
> longitude = 1.211
> 
> # Altitude of the station, with unit it is in. This is downloaded from
> # from the station if the hardware supports it.
> altitude = 150, foot# Choose 'foot' or 'meter' for unit
> Phil
> 
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d3aac356-1759-4d76-9899-dec1c06ef02b%40googlegroups.com.

[weewx-user] Weewx version 4

[Phil Owers]

Hi Guys
Just upgraded from v4.0.18b to version 4 and it has stopped weewx
>From the logs 

May  1 14:05:56 raspberrypi systemd[1]: Stopped LSB: weewx weather system.
May  1 14:05:59 raspberrypi systemd[1]: Starting LSB: weewx weather 
system...
May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Initializing weewx 
version 4.0.0
May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Using Python 3.7.3 
(default, Dec 20 2019, 18:57:59) #012[GCC 8.3.0]
May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Platform 
Linux-4.19.97-v7l+-armv7l-with-debian-10.3
May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: Locale is 
'en_GB.UTF-8'
May  1 14:05:59 raspberrypi weewx[1136] INFO __main__: PID file is 
/var/run/weewx.pid
May  1 14:05:59 raspberrypi weewx[1140] INFO __main__: Using configuration 
file /etc/weewx/weewx.conf
May  1 14:05:59 raspberrypi weewx[1140] INFO weewx.engine: Loading station 
type Vantage (weewx.drivers.vantage)
May  1 14:05:59 raspberrypi weewx[1124]: Starting weewx weather system: 
weewx.
May  1 14:05:59 raspberrypi systemd[1]: Started LSB: weewx weather system.
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: Caught 
unrecoverable exception:
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   could 
not convert string to float: '52.9444 1.2110'
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
Traceback (most recent call last):
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: File 
"/usr/share/weewx/weewxd", line 148, in main
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
engine = weewx.engine.StdEngine(config_dict)
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: File 
"/usr/share/weewx/weewx/engine.py", line 72, in __init__
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
self.preLoadServices(config_dict)
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: File 
"/usr/share/weewx/weewx/engine.py", line 112, in preLoadServices
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
self.stn_info = weewx.station.StationInfo(self.console, 
**config_dict['Station'])
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__: File 
"/usr/share/weewx/weewx/station.py", line 51, in __init__
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
self.latitude_f  = float(stn_dict['latitude'])
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
ValueError: could not convert string to float: '52.9444 1.2110'
May  1 14:05:59 raspberrypi weewx[1140] CRITICAL __main__:   
Exiting.

When I look in the weewx.conf file it had the lat an lon figures of 52.9444 
and 1.2110
I changed the values to mine of 52.944 and 1.211 (not sure where the extra 
digits came from) stopped and restarted weewx but it still fails
The above is after I changed the weewx.conf file which has

# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2019 Tom Keffer 
# See the file LICENSE.txt for your rights.
##
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx
# Whether to log successful operations
log_success = True
# Whether to log unsuccessful operations
log_failure = True
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 4.0.0
##
#   This section is for information about the station.
[Station]

# Description of the station location
location = SheringhamWeatherCenter

# Latitude in decimal degrees. Negative for southern hemisphere
latitude = 52.944
# Longitude in decimal degrees. Negative for western hemisphere.
longitude = 1.211

# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 150, foot# Choose 'foot' or 'meter' for unit
Phil


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4d00aa13-0eef-422b-9625-dc40e7411631%40googlegroups.com.

Re: [weewx-user] Re: Highcharts on Weewx v4

[Phil Owers]

Hi Gary
Hope you are keeping well and safe. Yes its averages-0.5.0.tar.gz
Phil

On Sat, 18 Apr 2020, 20:08 gjr80,  wrote:

> If you are referring to my weewx-highcharts extension then no it has not
> yet been ported to WeeWX 4.0. It may work under WeeWX 4.0/python 2 but
> definitely won't work under python 3.
>
> Give me a few days and I should have it ported.
>
> Gary
>
> On Sunday, 19 April 2020 04:48:17 UTC+10, Phil Owers wrote:
>>
>> Hi Guys
>>
>> Loaded highcharts onto my weewx v4 machine and it failed
>> averagesSearchX.py line 105 which is
>>  except Exception, e:
>>
>> Just wondered if this was a known problem
>>
>> Cheers Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/d6a23c01-e84b-4757-a85e-d7ffb68fde48%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/d6a23c01-e84b-4757-a85e-d7ffb68fde48%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pNEGS-vccK1GVw1wpyYNRF6CfN6CzqxAoQV6_OAVDKtAA%40mail.gmail.com.

Re: [weewx-user] Re: Highcharts on Weewx v4

[Phil Owers]

It works fine on Python 2
 Where could i find a python3 version
P

On Sat, 18 Apr 2020, 19:56 J D,  wrote:

> Hi,
> Run withPython2.7 or get a version of highcharts search for python3
>
> On Saturday, April 18, 2020 at 11:48:17 AM UTC-7, Phil Owers wrote:
>>
>> Hi Guys
>>
>> Loaded highcharts onto my weewx v4 machine and it failed
>> averagesSearchX.py line 105 which is
>>  except Exception, e:
>>
>> Just wondered if this was a known problem
>>
>> Cheers Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/c1562dc0-07d2-4f6b-84fe-be0f22d34ab4%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/c1562dc0-07d2-4f6b-84fe-be0f22d34ab4%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pNUueH2PxCRi%2BxThghGkqY%3Dwmu%2B1H99k-Kn_7ZW8BWKQg%40mail.gmail.com.

[weewx-user] Highcharts on Weewx v4

[Phil Owers]

Hi Guys

Loaded highcharts onto my weewx v4 machine and it failed
averagesSearchX.py line 105 which is 
 except Exception, e:

Just wondered if this was a known problem

Cheers Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c0c07cf7-9497-4236-9b0e-32283d0d4a09%40googlegroups.com.

[weewx-user] Re: I'm trying to install the weewx-forcast-master

[Phil Owers]

Hi
I had a similar problem  but as the file is a zip file I tried 
weewx-forecast-master.zip and via wee_extension it worked.
Phil

On Friday, April 10, 2020 at 9:58:03 PM UTC+1, David Barto wrote:
>
> I’m getting the following: 
>
> Magrathea:weewx$ wee_extension --install ~/weewx-forecast-master.tgz 
> Request to install '/Users/katherinebarto/weewx-forecast-master.tgz' 
> Extracting from tar archive 
> /Users/katherinebarto/weewx-forecast-master.tgz 
> Traceback (most recent call last): 
>   File "/Users/Shared/weewx/bin/wee_extension", line 82, in  
> main() 
>   File "/Users/Shared/weewx/bin/wee_extension", line 74, in main 
> ext.install_extension(options.install) 
>   File "/Users/Shared/weewx/bin/weecfg/extension.py", line 114, in 
> install_extension 
> raise InstallError("Unable to install from '%s': no common path (the 
> extension archive contains more than a single root directory)" % 
> extension_path) 
> weecfg.extension.InstallError: Unable to install from 
> '/Users/katherinebarto/weewx-forecast-master.tgz': no common path (the 
> extension archive contains more than a single root directory) 
>
> I don’t have any extension_path configured in my weewx.conf file and a 
> search of the discussion archive says that the above command should work. 
>
> What, again, am I doing incorrectly? 
>
> David

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/36814b34-36f7-4036-a58a-d92f1abdf3af%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

John
I did have the filename wrong, your file is a zip file so as soon as I 
changed it to weewx-forecast-master.zip wee_extension installed correctly 
and Im
now downloading from UKMO.
So thanks for your help and patience
Phil

On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/53061b53-7216-48a5-8d7e-35f3ee2fce25%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

Hi John
Ive just downloaded your new weewx-forecast-master and downloaded to my 
Downloads directory (weewx-forecast-master.gz)
Then sudo ./bin/wee_extension --install 
/home/pi/Downloads/weewx-forecast-master.gz (must be in home/weewx 
directory and it works for other install packages)
It doesn't install and I get 'readerror: file could not be opened  
successfully
I cant remember how I did this last time and to make sure I install 
correctly could you confirm the correct way of installing so to eliminate 
any mistakes I could make.
Cheers Phil 

On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8add067b-155a-4cbe-beea-ba4fbfdd4971%40googlegroups.com.

Re: [weewx-user] Re: Forecast 3.3.2

[Phil Owers]

Just getting another SD Card loaded with everything fresh. Then tomorrow
will start again on a spare pi3. Will keep you posted.  Phil

On Fri, 10 Apr 2020, 18:25 John Kline,  wrote:

> This is telling me that your issues are not with WeeWX and the forecast
> plugin.
>
> Do you have another machine you could try this on?  Running the simulator
> driver would be just fine for this excersize.
>
> On Apr 10, 2020, at 10:22 AM, Phil Owers  wrote:
>
> 
> Yes im running the latest buster on an RPI4.  Running host after running
> PYTHONPATH just replied connection timed out , no servers could be
> reached.  Yet my RPI3 works perfectly ok.
>
> On Fri, 10 Apr 2020, 17:55 John Kline,  wrote:
>
>> My guess is that the Akamai servers that you are being directed to are
>> acting up when you are getting the denied messages.
>>
>> The temporary name resolution could also be Akamai dns problems.
>>
>> Immediately after you see the temporary failure, does running ‘host
>> datapoint.metoffice.gov.uk‘ resolve?
>>
>> Just grasping at straws for these remaining questions:
>> What raspberry pi, what version of Raspbian, what version of Py3?  (I’m
>> running an up to date RPi4 with Buster 4.19.97-v7l+ #1294 SMP Thu Jan 30
>> 13:21:14 GMT 2020 armv7l GNU/Linux and Python 3.7.3 on my end to try this
>> and all is working fine.)
>>
>> On Apr 10, 2020, at 9:28 AM, Phil Owers  wrote:
>>
>> 
>> At the cursor
>> pi@raspberrypi:/home/weewx $ PYTHONPATH=/home/weewx/bin python3
>> /home/weewx/bin/user/forecast.py --method UKMO --action download --loc
>> 354731 --api-key ----f051
>> None
>> pi@raspberrypi:/home/weewx $
>>
>> In the log
>> Apr 10 17:17:12 raspberrypi forecast[3785] INFO __main__: MainThread:
>> UKMO: download forecast from '
>> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=f051
>> '
>> Apr 10 17:17:32 raspberrypi forecast[3785] ERROR __main__: MainThread:
>> UKMO: failed attempt 1 to download forecast: > Temporary failure in name resolution>
>> Apr 10 17:17:52 raspberrypi forecast[3785] ERROR __main__: MainThread:
>> UKMO: failed attempt 2 to download forecast: > Temporary failure in name resolution>
>> Apr 10 17:18:01 raspberrypi kernel: [23984.559200] brcmfmac:
>> brcmf_run_escan: error (-110)
>> Apr 10 17:18:01 raspberrypi kernel: [23984.559217] brcmfmac:
>> brcmf_cfg80211_scan: scan error (-110)
>> Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread:
>> UKMO: failed attempt 3 to download forecast: > Temporary failure in name resolution>
>> Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread:
>> UKMO: failed to download forecast
>>
>> Phil
>> On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>>>
>>> Just downloaded the forecast extension which was 3.3.2.which I think is
>>> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails
>>> forecast.py Line 567 except OSError , e; with an underscore under the ,
>>> Just wondered if anybody else has had this.
>>> Cheers Phil
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/21c677cf-99b6-412d-8085-24dfea8e5b7c%40googlegroups.com
>> <https://groups.google.com/d/msgid/weewx-user/21c677cf-99b6-412d-8085-24dfea8e5b7c%40googlegroups.com?utm_medium=email_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/758FAA47-402E-467A-BB66-681A4E3E8C28%40johnkline.com
>> <https://groups.google.com/d/msgid/weewx-user/758FAA47-402E-467A-BB66-681A4E3E8C28%40johnkline.com?utm_medium=email_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.go

Re: [weewx-user] Re: Forecast 3.3.2

[Phil Owers]

Yes im running the latest buster on an RPI4.  Running host after running
PYTHONPATH just replied connection timed out , no servers could be
reached.  Yet my RPI3 works perfectly ok.

On Fri, 10 Apr 2020, 17:55 John Kline,  wrote:

> My guess is that the Akamai servers that you are being directed to are
> acting up when you are getting the denied messages.
>
> The temporary name resolution could also be Akamai dns problems.
>
> Immediately after you see the temporary failure, does running ‘host
> datapoint.metoffice.gov.uk‘ resolve?
>
> Just grasping at straws for these remaining questions:
> What raspberry pi, what version of Raspbian, what version of Py3?  (I’m
> running an up to date RPi4 with Buster 4.19.97-v7l+ #1294 SMP Thu Jan 30
> 13:21:14 GMT 2020 armv7l GNU/Linux and Python 3.7.3 on my end to try this
> and all is working fine.)
>
> On Apr 10, 2020, at 9:28 AM, Phil Owers  wrote:
>
> 
> At the cursor
> pi@raspberrypi:/home/weewx $ PYTHONPATH=/home/weewx/bin python3
> /home/weewx/bin/user/forecast.py --method UKMO --action download --loc
> 354731 --api-key ----f051
> None
> pi@raspberrypi:/home/weewx $
>
> In the log
> Apr 10 17:17:12 raspberrypi forecast[3785] INFO __main__: MainThread:
> UKMO: download forecast from '
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=f051
> '
> Apr 10 17:17:32 raspberrypi forecast[3785] ERROR __main__: MainThread:
> UKMO: failed attempt 1 to download forecast:  Temporary failure in name resolution>
> Apr 10 17:17:52 raspberrypi forecast[3785] ERROR __main__: MainThread:
> UKMO: failed attempt 2 to download forecast:  Temporary failure in name resolution>
> Apr 10 17:18:01 raspberrypi kernel: [23984.559200] brcmfmac:
> brcmf_run_escan: error (-110)
> Apr 10 17:18:01 raspberrypi kernel: [23984.559217] brcmfmac:
> brcmf_cfg80211_scan: scan error (-110)
> Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread:
> UKMO: failed attempt 3 to download forecast:  Temporary failure in name resolution>
> Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread:
> UKMO: failed to download forecast
>
> Phil
> On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>>
>> Just downloaded the forecast extension which was 3.3.2.which I think is
>> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails
>> forecast.py Line 567 except OSError , e; with an underscore under the ,
>> Just wondered if anybody else has had this.
>> Cheers Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/21c677cf-99b6-412d-8085-24dfea8e5b7c%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/21c677cf-99b6-412d-8085-24dfea8e5b7c%40googlegroups.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/758FAA47-402E-467A-BB66-681A4E3E8C28%40johnkline.com
> <https://groups.google.com/d/msgid/weewx-user/758FAA47-402E-467A-BB66-681A4E3E8C28%40johnkline.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pP-Zz4b8%2BOWAtawr4%2BEvP%3DKjk-hvZq0LJwmriP36aJd-g%40mail.gmail.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

At the cursor
pi@raspberrypi:/home/weewx $ PYTHONPATH=/home/weewx/bin python3 
/home/weewx/bin/user/forecast.py --method UKMO --action download --loc 
354731 --api-key ----f051
None
pi@raspberrypi:/home/weewx $ 

In the log
Apr 10 17:17:12 raspberrypi forecast[3785] INFO __main__: MainThread: UKMO: 
download forecast from 
'http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=f051'
Apr 10 17:17:32 raspberrypi forecast[3785] ERROR __main__: MainThread: 
UKMO: failed attempt 1 to download forecast: 
Apr 10 17:17:52 raspberrypi forecast[3785] ERROR __main__: MainThread: 
UKMO: failed attempt 2 to download forecast: 
Apr 10 17:18:01 raspberrypi kernel: [23984.559200] brcmfmac: 
brcmf_run_escan: error (-110)
Apr 10 17:18:01 raspberrypi kernel: [23984.559217] brcmfmac: 
brcmf_cfg80211_scan: scan error (-110)
Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread: 
UKMO: failed attempt 3 to download forecast: 
Apr 10 17:18:12 raspberrypi forecast[3785] ERROR __main__: MainThread: 
UKMO: failed to download forecast

Phil
On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/21c677cf-99b6-412d-8085-24dfea8e5b7c%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

I raised a second API to see if that was the problem hence why you got 2 
different ones.  The following is from the key ending in f051.   Both keys 
acted the same.

pi@raspberrypi:~ $ curl --user-agent 'foo' 
"http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=----f051;
{"SiteRep":{"Wx":{"Param":[{"name":"F","units":"C","$":"Feels Like 
Temperature"},{"name":"G","units":"mph","$":"Wind 
Gust"},{"name":"H","units":"%","$":"Screen Relative 
Humidity"},{"name":"T","units":"C","$":"Temperature"},{"name":"V","units":"","$":"Visibility"},{"name":"D","units":"compass","$":"Wind
 
Direction"},{"name":"S","units":"mph","$":"Wind 
Speed"},{"name":"U","units":"","$":"Max UV 
Index"},{"name":"W","units":"","$":"Weather 
Type"},{"name":"Pp","units":"%","$":"Precipitation 
Probability"}]},"DV":{"dataDate":"2020-04-10T09:00:00Z","type":"Forecast","Location":{"i":"354731","lat":"52.9456","lon":"1.212","name":"SHERINGHAM
 
(BEACH)","country":"ENGLAND","continent":"EUROPE","elevation":"0.0","Period":[{"type":"Day","value":"2020-04-10Z","Rep":[{"D":"ESE","F":"6","G":"13","H":"87","Pp":"5","S":"11","T":"8","V":"GO","W":"7","U":"1","$":"360"},{"D":"ESE","F":"9","G":"18","H":"79","Pp":"4","S":"9","T":"11","V":"GO","W":"7","U":"3","$":"540"},{"D":"ESE","F":"10","G":"18","H":"68","Pp":"4","S":"16","T":"13","V":"GO","W":"7","U":"4","$":"720"},{"D":"ESE","F":"12","G":"18","H":"60","Pp":"4","S":"13","T":"15","V":"GO","W":"7","U":"2","$":"900"},{"D":"ESE","F":"10","G":"13","H":"73","Pp":"4","S":"9","T":"11","V":"GO","W":"7","U":"1","$":"1080"},{"D":"SE","F":"7","G":"20","H":"78","Pp":"3","S":"9","T":"9","V":"GO","W":"7","U":"0","$":"1260"}]},{"type":"Day","value":"2020-04-11Z","Rep":[{"D":"SE","F":"7","G":"20","H":"79","Pp":"4","S":"9","T":"9","V":"GO","W":"7","U":"0","$":"0"},{"D":"SSE","F":"6","G":"22","H":"82","Pp":"4","S":"9","T":"9","V":"GO","W":"7","U":"0","$":"180"},{"D":"SSE","F":"6","G":"22","H":"81","Pp":"0","S":"9","T":"9","V":"GO","W":"1","U":"1","$":"360"},{"D":"S","F":"13","G":"18","H":"62","Pp":"0","S":"11","T":"15","V":"VG","W":"1","U":"3","$":"540"},{"D":"S","F":"17","G":"18","H":"50","Pp":"0","S":"11","T":"19","V":"VG","W":"1","U":"5","$":"720"},{"D":"SSW","F":"18","G":"16","H":"49","Pp":"7","S":"9","T":"20","V":"VG","W":"3","U":"2","$":"900"},{"D":"S","F":"16","G":"16","H":"61","Pp":"36","S":"9","T":"17","V":"GO","W":"3","U":"1","$":"1080"},{"D":"SW","F":"13","G":"13","H":"77","Pp":"8","S":"7","T":"14","V":"VG","W":"7","U":"0","$":"1260"}]},{"type":"Day","value":"2020-04-12Z","Rep":[{"D":"WSW","F":"11","G":"11","H":"84","Pp":"10","S":"7","T":"12","V":"VG","W":

Download failures are every time, hence why the forecast.sdb is empty.
Im using a Python 3 only machine with your forecast.py file from your link 
you gave me the other day. The weewx version is V4.0.0.b18 and always fails.
My main machine runs weewx Version 3.9.2 and downloads from the met office 
and uses forecast 3.3.2 forecast.py that was modified to use mozilla5.0 to 
work and works fine.
About a couple of months ago UKMO started to fail and via email they 
suggested to use mozilla5.0. There were others around the UK who also had 
problems it wasn't just me. 
It failed HTTP Error 403: Forbidden which is the same as your forecast.py 
hence why I think it is the same problem.
 I cant remember the person name, its on this forum somewhere, who changed 
his code form
try:
response = urllib2.urlopen(u)
return response.read()
to 
try:
req = urllib2.Request(u)
req.add_header('User-Agent', 'Mozilla/5.0')

response = urllib2.urlopen(req)
return response.read()
This changed worked and we have been using it ever since.
Phil


On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d4bbeec7-b162-46de-b0c9-65f8ec4ea221%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

But looking in the log a little late I see this
Apr 10 10:39:24 raspberrypi weewx[626] INFO user.forecast: UKMOThread: 
UKMO: download forecast from 
'http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=f051'
Apr 10 10:39:24 raspberrypi weewx[626] INFO weewx.manager: Added record 
2020-04-10 10:30:00 BST (1586511000) to daily summary in 'weewx.sdb'
Apr 10 10:39:24 raspberrypi weewx[626] ERROR user.forecast: UKMOThread: 
UKMO: failed attempt 1 to download forecast: HTTP Error 403: Forbidden
Apr 10 10:39:24 raspberrypi weewx[626] ERROR user.forecast: UKMOThread: 
UKMO: failed attempt 2 to download forecast: HTTP Error 403: Forbidden
Apr 10 10:39:24 raspberrypi weewx[626] ERROR user.forecast: UKMOThread: 
UKMO: failed attempt 3 to download forecast: HTTP Error 403: Forbidden
Apr 10 10:39:24 raspberrypi weewx[626] ERROR user.forecast: UKMOThread: 
UKMO: failed to download forecast
Apr 10 10:39:24 raspberrypi weewx[626] ERROR user.forecast: UKMOThread: 
UKMO: no forecast data for 354731 from 
http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/
Apr 10 10:39:24 raspberrypi weewx[626] INFO user.forecast: UKMOThread: 
UKMO: download forecast from 
'http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=f051'

On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/755d97de-cac8-4c97-85ea-9fb98a453d17%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

pi@raspberrypi:~ $ host datapoint.metoffice.gov.uk
datapoint.metoffice.gov.uk is an alias for 
datapoint.metoffice.gov.uk.edgesuite.net.
datapoint.metoffice.gov.uk.edgesuite.net is an alias for a978.r.akamai.net.
a978.r.akamai.net has address 213.123.252.58
a978.r.akamai.net has address 213.123.252.56
pi@raspberrypi:~ $
{"SiteRep":{"Wx":{"Param":[{"name":"F","units":"C","$":"Feels Like 
Temperature"},{"name":"G","units":"mph","$":"Wind 
Gust"},{"name":"H","units":"%","$":"Screen Relative 
Humidity"},{"name":"T","units":"C","$":"Temperature"},{"name":"V","units":"","$":"Visibility"},{"name":"D","units":"compass","$":"Wind
 
Direction"},{"name":"S","units":"mph","$":"Wind 
Speed"},{"name":"U","units":"","$":"Max UV 
Index"},{"name":"W","units":"","$":"Weather 
Type"},{"name":"Pp","units":"%","$":"Precipitation 
Probability"}]},"DV":{"dataDate":"2020-04-10T07:00:00Z","type":"Forecast","Location":{"i":"3772","lat":"51.479","lon":"-0.449","name":"HEATHROW","country":"ENGLAND","continent":"EUROPE","elevation":"25.0","Period":[{"type":"Day","value":"2020-04-10Z","Rep":[{"D":"NE","F":"9","G":"13","H":"78","Pp":"0","S":"4","T":"10","V":"MO","W":"2","U":"0","$":"180"},{"D":"NE","F":"8","G":"18","H":"87","Pp":"0","S":"4","T":"9","V":"MO","W":"1","U":"1","$":"360"},{"D":"E","F":"12","G":"11","H":"71","Pp":"0","S":"9","T":"14","V":"MO","W":"1","U":"3","$":"540"},{"D":"ESE","F":"19","G":"13","H":"51","Pp":"0","S":"9","T":"21","V":"GO","W":"1","U":"5","$":"720"},{"D":"ESE","F":"21","G":"16","H":"44","Pp":"0","S":"11","T":"23","V":"GO","W":"1","U":"2","$":"900"},{"D":"ESE","F":"18","G":"18","H":"50","Pp":"0","S":"11","T":"20","V":"GO","W":"1","U":"1","$":"1080"},{"D":"E","F":"14","G":"13","H":"65","Pp":"0","S":"7","T":"15","V":"GO","W":"0","U":"0","$":"1260"}]},{"type":"Day","value":"2020-04-11Z","Rep":[{"D":"E","F":"12","G":"11","H":"76","Pp":"0","S":"4","T":"12","V":"GO","W":"0","U":"0","$":"0"},{"D":"E","F":"11

There is more but it only copied what was on the screen I then usedmy 
location and got 
i@raspberrypi:~ $ curl --user-agent 'foo' 
"http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=8f916e8d-7477-4198-8ecc-ae764ff7bb84;
{"SiteRep":{"Wx":{"Param":[{"name":"F","units":"C","$":"Feels Like 
Temperature"},{"name":"G","units":"mph","$":"Wind 
Gust"},{"name":"H","units":"%","$":"Screen Relative 
Humidity"},{"name":"T","units":"C","$":"Temperature"},{"name":"V","units":"","$":"Visibility"},{"name":"D","units":"compass","$":"Wind
 
Direction"},{"name":"S","units":"mph","$":"Wind 
Speed"},{"name":"U","units":"","$":"Max UV 
Index"},{"name":"W","units":"","$":"Weather 
Type"},{"name":"Pp","units":"%","$":"Precipitation 
Probability"}]},"DV":{"dataDate":"2020-04-10T07:00:00Z","type":"Forecast","Location":{"i":"354731","lat":"52.9456","lon":"1.212","name":"SHERINGHAM
 
(BEACH)","country":"ENGLAND","continent":"EUROPE","elevation":"0.0","Period":[{"type":"Day","value":"2020-04-10Z","Rep":[{"D":"ESE","F":"5","G":"13","H":"90","Pp":"5","S":"11","T":"8","V":"MO","W":"7","U":"0","$":"180"},{"D":"ESE","F":"6","G":"13","H":"87","Pp":"5","S":"11","T":"8","V":"GO","W":"7","U":"1","$":"360"},{"D":"ESE","F":"7","G":"16","H":"84","Pp":"4","S":"11","T":"9","V":"GO","W":"7","U":"3","$":"540"},{"D":"ESE","F":"10","G":"18","H":"66","Pp":"4","S":"16","T":"13","V":"GO","W":"7","U":"4","$":"720"},{"D":"ESE","F":"11","G":"20","H":"61","Pp":"5","S":"16","T":"14","V":"GO","W":"7","U":"2","$":"900"},{"D":"SE","F":"10","G":"16","H":"72","Pp":"4","S":"9","T":"12","V":"GO","W":"7","U":"1","$":"1080"},{"D":"SE","F":"7","G":"20","H":"77","Pp":"4","S":"9","T":"9","V":"GO","W":"7","U":"0","$":"1260"}]},{"type":"Day","value":"2020-04-11Z","Rep":[{"D":"SSE","F":"7",
Again there is more
Phil


On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/956e76a2-776e-46ba-8fd9-1bff76e9654a%40googlegroups.com.

Re: [weewx-user] Re: Forecast 3.3.2

[Phil Owers]

That gives me a display of siterep and then the list of param name units
feels like etc and then the info. So works.  Its also the same on my
working pi.  So that looks good
Phil

On Fri, 10 Apr 2020, 05:34 John Kline,  wrote:

> Hi Phil,
>
> Please run the following command (it is a single line), substituting your
> API key, and reply with the output you receive.
>
> curl --user-agent 'foo' "
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/3772?res=3hourly=X
> "
>
> For me, with —user-agent not specified, with —user-agent ‘foo’ specified,
> or with any other user-agent specified, the command works.
>
> Web searches do show that, from time to time, UKMO has issues and there is
> anecdotal evidence that changing the user-agent sometimes helps.  I wonder
> if your original problem, where you needed to change the user-agent, was
> one of those times.
>
> It will also be interested to see if you can resolve
> datapoint.metoffice.gov.uk.  In addition to that above, please also
> include the output of:
>
> host datapoint.metoffice.gov.uk
>
> I will revert the change I made to specify a user-agent if it turns out it
> is not needed (which currently appears to be the case).
>
> John
>
> On Apr 9, 2020, at 6:05 PM, John Kline  wrote:
>
> 
> Hi Phil,
>
> I committed the change.  Please pull again.
>
> None of the code is going to help you with name resolution; but it doesn’t
> hurt to try anyway.
>
> Afterwards, try resolving the machine name in the UKMO url on the same
> machine that WeeWX is running (with host or nslookup).
>
> On Apr 9, 2020, at 4:49 PM, Phil Owers  wrote:
>
> 
> John
> Mine keeps saying temp temporary failure in name. Could you send me your
> forecast.py file please
> Phil
>
> On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>>
>> Just downloaded the forecast extension which was 3.3.2.which I think is
>> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails
>> forecast.py Line 567 except OSError , e; with an underscore under the ,
>> Just wondered if anybody else has had this.
>> Cheers Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/88ea690b-da8c-49f2-8b62-53b275ee31e7%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/88ea690b-da8c-49f2-8b62-53b275ee31e7%40googlegroups.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/9EE1E277-3441-4AA8-ADCF-BC0E78B28F06%40johnkline.com
> <https://groups.google.com/d/msgid/weewx-user/9EE1E277-3441-4AA8-ADCF-BC0E78B28F06%40johnkline.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pM1OnEg1ia%2BNose1qfZhiox%2BPMV40X5N516zH5%2BjegPNg%40mail.gmail.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

John
Mine keeps saying temp temporary failure in name. Could you send me your 
forecast.py file please
Phil 

On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/88ea690b-da8c-49f2-8b62-53b275ee31e7%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/
Apr  9 23:11:21 raspberrypi weewx[1898] ERROR user.forecast: UKMOThread: 
UKMO: failed attempt 3 to download forecast: 

Hope that's what you need 

I could set up a temp api / location for UKMO if that would help.  But its 
late here so it would be later tomorrow 
Phil


On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/c0d8f662-4ca3-472a-8252-c05a45216b2c%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

John
That was quick
It failed in the syslog NameError : name 'request' is not defined
I will put log.info(u) before the first line if that helps
and thanks for helping Phil

On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/91a060e1-ba96-40fd-99ea-a03a84b1254f%40googlegroups.com.

[weewx-user] Re: Forecast 3.3.2

[Phil Owers]

Hi John
Just need to tweek the forecast.py so it can download from the UK Met 
Office.
They changed a few weeks ago to only excepting   'User-Agent', 'Mozilla/5.0 

In the forecast.py you sent me it had 
response = six.moves.urllib.request.urlopen(u)
return response.read().decode('utf-8')

My previous forecast.py I used

req = urllib2.Request(u)
req.add_header('User-Agent', 'Mozilla/5.0')
response = urllib2.urlopen(req)
return response.read()
But I cant get that to work any chance you could help out please.   Sorry 
to be a pain
Phil


   



On Wednesday, April 8, 2020 at 3:11:31 PM UTC+1, Phil Owers wrote:
>
> Just downloaded the forecast extension which was 3.3.2.which I think is 
> the latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
> forecast.py Line 567 except OSError , e; with an underscore under the ,
> Just wondered if anybody else has had this.
> Cheers Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e9b708ad-835c-40bb-a0a8-1899260f5cec%40googlegroups.com.

Re: [weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Hi Gary.  Couldn't add apptime on my main file using 4.0.0b18 several day
errors even after using rebuild daily.  As a work round I added appTime
perfectly ok on v3.9.2 waited several cycles without errors then
transferred the sdb file to v4.0.018b and thats been working fine. Phil

On Tue, 7 Apr 2020, 16:10 Phil Owers,  wrote:

> Just pause on my last post.  Didn't spot you added   _extended on line 1
> which I missed
> Phil
>
> On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>>
>> Hi Guys
>>
>> First of all I hope everybody is staying safe and well
>>
>> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>>
>> Followed the Installation using setup.py, loaded all the prerequisites
>> for Debian 10(Buster)
>> Installed using python3 ./setup.py build  , sudo python3 ./setup.py
>> install
>>
>> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>>
>> Then started weewx using sudo ./bin/weewx
>> It downloaded all the data from my test console (This works fine plug
>> into another rasp pi v 3.9.2) then failed continuously overnight with no
>> graphs being generated.
>> The weewx.sdb was generated.
>>
>> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting
>> backfill of daily summaries
>> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main
>> packet loop.
>> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop
>> exiting. Shutting engine down.
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught
>> OSError: [Errno 5] Input/output error
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> Traceback (most recent call last):
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> File "./bin/weewxd", line 154, in main
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> engine.run()
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> File "/home/weewx/bin/weewx/engine.py", line 191, in run
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> callback(event)
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> to_sorted_string(event.packet))
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> OSError: [Errno 5] Input/output error
>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>> Waiting 10 seconds then retrying...
>> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new
>> high-speed USB device number 6 using xhci_hcd
>>
>> No extensions have been added . Apologies if Ive jumped the gun and this
>> doesn't work yet as a standalone
>> Phil
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/256271b3-cecd-44ea-b969-8cdb7eabae88%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/256271b3-cecd-44ea-b969-8cdb7eabae88%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pPz2XVeo9pFnKvEDjLuqSvnN07uA1Cg-68YaPU2D7YFjw%40mail.gmail.com.

Re: [weewx-user] Re: Forecast 3.3.2

[Phil Owers]

Thanks John.  Will give it ago
Phil

On Wed, 8 Apr 2020, 20:30 John Kline,  wrote:

> If you want while waiting for Matthew to update:
>
> https://github.com/chaunceygardiner/weewx-forecast
>
> It requires WeeWX 4 and works with Python 2 and 3.
>
> I’ve been running it for months and Vince (on this mailing list) has also
> been running it.
>
> On Apr 8, 2020, at 12:13 PM, William Burton  wrote:
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/C370F50B-9049-4D55-BB89-DB16B05C1C86%40johnkline.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pPjezqjymV4KJB38OC3vFBPBGO5g3fws%2BGoP86yj%2BZt5g%40mail.gmail.com.

[weewx-user] Forecast 3.3.2

[Phil Owers]

Just downloaded the forecast extension which was 3.3.2.which I think is the 
latest on to a python 3 only machine (weewx 4.0.0b18) and it fails 
forecast.py Line 567 except OSError , e; with an underscore under the ,
Just wondered if anybody else has had this.
Cheers Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/809b732c-76cc-4166-bc62-c47263fe0e70%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Ooops sorry I can see that now  Didn't realize that. Thanks Vince
I was trying to upgrade a database that didn't have appTemp in it and that 
failed.
Will retry Garys change and see what happens
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/200a8c1d-0041-456f-b95a-b7b1a09b5edc%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Just pause on my last post.  Didn't spot you added   _extended on line 1 
which I missed
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/256271b3-cecd-44ea-b969-8cdb7eabae88%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Sorry Gary it didn't work 
schema_extended = {'table': schemas.wview_extended.table +  [('appTemp', 
'REAL'), ('windrun', 'REAL')], 'day_summaries' : 
schemas.wview_extended.day_summaries}
AttributeError: module 'schemas' has no attribute 'wview_extended'

I think its what you had written ??
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f62049c4-d1c8-40bf-b036-dce727432b81%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

' while searching for 
'day.wind.count.raw'

I restored the origanal weewx.sdb (without appTemp and windrun and and it 
works OK
I then tried update the database a second time and got the same results and 
the above log.
As it worked with the pre change weewx.sdb and not to the new database Im 
assuming (don't like doing that) the problem may well be the new database
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/1849e978-9319-418b-b139-8296061ef08b%40googlegroups.com.

Re: [weewx-user] Re: SteelSeries Gauges for WeeWx install problem

[Phil Owers]

I believe 2.7.4.tar.gz is the correct one perhaps somebody could confirm
that Please..   Phil

On Mon, 6 Apr 2020, 20:01 weather list,  wrote:

> Ah, it looks as if perhaps I got the wrong repository/version. This
>  seems to
> be the correct one. Will try again.
>
> On Monday, April 6, 2020 at 2:05:03 PM UTC-4, weather list wrote:
>>
>> Using the downloaded master from here,
>>  I ran the standard install:
>>
>> $ sudo bin/wee_extension --install /home/pi/Downloads/weewx-steelseries-
>> master.zip --config=weewx.conf
>> Request to install '/home/pi/Downloads/weewx-steelseries-master.zip'
>> Extracting from zip archive /home/pi/Downloads/weewx-steelseries-master.
>> zip
>> Traceback (most recent call last):
>>   File "bin/wee_extension", line 82, in 
>> main()
>>   File "bin/wee_extension", line 74, in main
>> ext.install_extension(options.install)
>>   File "/home/weewx/bin/weecfg/extension.py", line 116, in
>> install_extension
>> self.install_from_dir(extension_dir)
>>   File "/home/weewx/bin/weecfg/extension.py", line 174, in
>> install_from_dir
>> shutil.copy(source_path, destination_path)
>>   File "/usr/lib/python2.7/shutil.py", line 139, in copy
>> copyfile(src, dst)
>>   File "/usr/lib/python2.7/shutil.py", line 96, in copyfile
>> with open(src, 'rb') as fsrc:
>> IOError: [Errno 2] No such file or directory:
>> '/var/tmp/weewx-steelseries-master/skins/ss/gauge-data.txt.tmpl'
>> Can someone tell where I have this wrong?
>>
>> Raspbian Desktop running in a virtual machine.
>>
>> All other extensions have installed normally.
>>
>> WeeWx installed using setup.py, version 3.9.2, Python 2.7x
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/09e86a4f-9a97-4e00-8b4e-36867c10663a%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pNaEW%3DOx%2BLyc%2BKmScdMAVzLGRQ3AZkStf3%3DEqxuOVMj-w%40mail.gmail.com.

Re: [weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

I used steelseries-2.7.4.tar.gz
Phil

On Mon, 6 Apr 2020, 19:46 steeple ian,  wrote:

> Phil,
> Could it be that you downloaded your installs from different places? I
> have just worked out that there are two out there.
> Ian
>
> On Mon, Apr 6, 2020 at 4:38 PM Thomas Keffer  wrote:
>
>> As far as weewx is concerned, it's always been rainRate.
>>
>> I don't know how Steelgauges works, but it's possible it's only used in
>> case-insensitive database queries.
>>
>> -tk
>>
>> On Mon, Apr 6, 2020 at 8:12 AM Phil Owers 
>> wrote:
>>
>>> This is interesting
>>> I have a pi running 3.9.2 (Python2) which runs OK with rainrate
>>> (Steelgauges 2.7.4) ( yes all lower case)
>>>
>>> But on a pi running v4.0.0.b18 (Python3) with Steelgauges 2.7.4 rainrate
>>> generates an error in the log which is corrected if its changed to rainRate.
>>>
>>> Phil
>>>
>>>
>>>
>>> On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>>>>
>>>> Hi Guys
>>>>
>>>> First of all I hope everybody is staying safe and well
>>>>
>>>> Before I go into to many details  should weewx v4.0.0b18 work on its
>>>> own.
>>>>
>>>> Followed the Installation using setup.py, loaded all the prerequisites
>>>> for Debian 10(Buster)
>>>> Installed using python3 ./setup.py build  , sudo python3 ./setup.py
>>>> install
>>>>
>>>> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>>>>
>>>> Then started weewx using sudo ./bin/weewx
>>>> It downloaded all the data from my test console (This works fine plug
>>>> into another rasp pi v 3.9.2) then failed continuously overnight with no
>>>> graphs being generated.
>>>> The weewx.sdb was generated.
>>>>
>>>> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting
>>>> backfill of daily summaries
>>>> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting
>>>> main packet loop.
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop
>>>> exiting. Shutting engine down.
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught
>>>> OSError: [Errno 5] Input/output error
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> Traceback (most recent call last):
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> File "./bin/weewxd", line 154, in main
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:
>>>>   engine.run()
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> File "/home/weewx/bin/weewx/engine.py", line 191, in run
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:
>>>>   self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET,
>>>> packet=packet))
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:
>>>>   callback(event)
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:
>>>>   to_sorted_string(event.packet))
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> OSError: [Errno 5] Input/output error
>>>> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
>>>> Waiting 10 seconds then retrying...
>>>> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new
>>>> high-speed USB device number 6 using xhci_hcd
>>>>
>>>> No extensions have been added . Apologies if Ive jumped the gun and
>>>> this doesn't work yet as a standalone
>>>> Phil
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "weewx-user" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to weewx-user+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d

Re: [weewx-user] SteelSeries Gauges for WeeWx install problem

[Phil Owers]

I used sudo ./bin/wee_extension --install  /home
pi/Downloads/steelseries.2.7.4.tar.gzThat worked for me. Phil

On Mon, 6 Apr 2020, 19:05 weather list,  wrote:

> Using the downloaded master from here,
>  I ran the standard install:
>
> $ sudo bin/wee_extension --install /home/pi/Downloads/weewx-steelseries-
> master.zip --config=weewx.conf
> Request to install '/home/pi/Downloads/weewx-steelseries-master.zip'
> Extracting from zip archive /home/pi/Downloads/weewx-steelseries-master.
> zip
> Traceback (most recent call last):
>   File "bin/wee_extension", line 82, in 
> main()
>   File "bin/wee_extension", line 74, in main
> ext.install_extension(options.install)
>   File "/home/weewx/bin/weecfg/extension.py", line 116, in
> install_extension
> self.install_from_dir(extension_dir)
>   File "/home/weewx/bin/weecfg/extension.py", line 174, in
> install_from_dir
> shutil.copy(source_path, destination_path)
>   File "/usr/lib/python2.7/shutil.py", line 139, in copy
> copyfile(src, dst)
>   File "/usr/lib/python2.7/shutil.py", line 96, in copyfile
> with open(src, 'rb') as fsrc:
> IOError: [Errno 2] No such file or directory:
> '/var/tmp/weewx-steelseries-master/skins/ss/gauge-data.txt.tmpl'
> Can someone tell where I have this wrong?
>
> Raspbian Desktop running in a virtual machine.
>
> All other extensions have installed normally.
>
> WeeWx installed using setup.py, version 3.9.2, Python 2.7x
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/131dc366-fd77-48d5-a589-c84d53483e6f%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pPgyBMQhJinRQ-HF1cJkNXogyeZtt8qovS6a2%3DwMuGoQQ%40mail.gmail.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

This is interesting
I have a pi running 3.9.2 (Python2) which runs OK with rainrate 
(Steelgauges 2.7.4) ( yes all lower case)

But on a pi running v4.0.0.b18 (Python3) with Steelgauges 2.7.4 rainrate 
generates an error in the log which is corrected if its changed to rainRate.

Phil



On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/8720d1b3-1d3f-4c78-9aec-5896b1b0e63e%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Gary
Couldn't understand where rainrate came from so Just wee_extension -- 
install steelseries-2.7.4tar.gz onto a spare pi and rainrate and not 
rainRate is in the ss/skin.conf file.
Any chance somebody else could try just to make sure.
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2cefabaa-9937-4f4c-a4b8-385964218a2e%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Yep case sure does, log clear.  Apologies for that part no idea where that 
came from
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e27589ca-7ac5-47f9-b4d4-914e26074e74%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Here is the log

Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: Caught 
unrecoverable exception in generator 'weewx.imagegenerator.ImageGenerator'
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  rainrate
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  Traceback (most recent call last):
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 197, in run
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  obj.start()
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 280, in start
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  self.run()
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/imagegenerator.py", line 41, in run
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  self.genImages(self.gen_ts)
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/imagegenerator.py", line 180, in 
genImages
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  aggregate_interval=aggregate_interval)
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/xtypes.py", line 91, in get_series
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  raise weewx.UnknownType(obs_type)
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  weewx.UnknownType: rainrate
Apr  6 14:40:17 raspberrypi weewx[612] ERROR weewx.reportengine: 
  Generator terminated

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/a1fd90ae-45c5-42f7-a2a5-f4eb7a96f6cb%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Gary
That worked and generated a gauge-data.txt file and it showed 0.2mm of 
hourly rain which is correct.

The log still has UnknownType rainrate when it try's to produce images

Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6f6735f2-7e2a-4f79-a337-e706844230c1%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

It rained this morning and it registered ok on another page
Cant tell about the gauges as while the log reports this error the 
gauge-data.txt file does not generate.
Loading your new gauge-data file now
Phil


On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/175840bb-2986-4711-abd9-cf4c5e8ae404%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Hi Gary
Returned gauge template to normal and restored rainrate in ss/skin.conf.
Its still failing at the moment
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/41b9d852-ef8a-4c07-8b4f-b156f72504b2%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

If I take out the rainrate in ss/skin.conf that gets rid of the rainrate 
error in the log
If I ## all the lines with rain in them in gauge.date.txt file in SS then 
all the other errors in the log then go and the gauge.data.txt is formed 
correctly(all be it without the rain info)

Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/34f4fc85-6725-4b27-8871-0f1623f7cf37%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Gary
It downloaded all the records from the console which was about 3 weeks 
records but the last 24 hrs did have some gaps so I downloaded my full 
working copy of weewx.sdb 
but im afraid the result was the same with the same errors
Phil

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/weewxd", line 154, in main
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> engine.run()
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 191, in run
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> callback(event)
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> to_sorted_string(event.packet))
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> OSError: [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Waiting 10 seconds then retrying...
> Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
> high-speed USB device number 6 using xhci_hcd
>
> No extensions have been added . Apologies if Ive jumped the gun and this 
> doesn't work yet as a standalone
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/4cd21914-fc06-4e7d-bca5-ca92481f35fd%40googlegroups.com.

[weewx-user] Re: weewx beta version 4.0.0b18

[Phil Owers]

Thanks Gary 
Changed it run automatically from start up and it worked fine overnight
So decided the next step was to load steelguages 2.7.4 via wee_extension.   
It loaded ok but the next download I got the following errors 

Apr  5 13:00:19 raspberrypi weewx[604] INFO weewx.reportengine: Copied 5 
files to /home/weewx/public_html
Apr  5 13:00:19 raspberrypi weewx[604] INFO weewx.reportengine: Copied 6 
files to /home/weewx/public_html/ss
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator: 
Generate failed with exception ''
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator:  
Ignoring template /home/weewx/skins/ss/gauge-data.txt.tmpl
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator:  
Reason: '>' not supported between instances of 'NoneType' and 'int'
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator:   
Traceback (most recent call last):
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator: 
File "/home/weewx/bin/weewx/cheetahgenerator.py", line 322, in 
generate
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator: 
  unicode_string = compiled_template.respond()
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator: 
File "_home_weewx_skins_ss_gauge_data_txt_tmpl.py", line 339, in 
respond
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.cheetahgenerator:   
TypeError: '>' not supported between instances of 'NoneType' and 'int'
Apr  5 13:00:19 raspberrypi weewx[604] INFO weewx.cheetahgenerator: 
Generated 1 files for report SteelSeries in 0.32 seconds
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: Caught 
unrecoverable exception in generator 'weewx.imagegenerator.ImageGenerator'
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  rainrate
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  Traceback (most recent call last):
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 197, in run
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  obj.start()
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/reportengine.py", line 280, in start
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  self.run()
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/imagegenerator.py", line 41, in run
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  self.genImages(self.gen_ts)
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/imagegenerator.py", line 180, in 
genImages
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  aggregate_interval=aggregate_interval)
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
File "/home/weewx/bin/weewx/xtypes.py", line 91, in get_series
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  raise weewx.UnknownType(obs_type)
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  weewx.UnknownType: rainrate
Apr  5 13:00:19 raspberrypi weewx[604] ERROR weewx.reportengine: 
  Generator terminated

Phil 

On Saturday, April 4, 2020 at 10:40:41 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
>
> First of all I hope everybody is staying safe and well
>
> Before I go into to many details  should weewx v4.0.0b18 work on its own.
>
> Followed the Installation using setup.py, loaded all the prerequisites for 
> Debian 10(Buster)
> Installed using python3 ./setup.py build  , sudo python3 ./setup.py install
>
> Entered the name, vantage (6), serial , metric, ttyusb0  etc.
>
> Then started weewx using sudo ./bin/weewx
> It downloaded all the data from my test console (This works fine plug into 
> another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
> being generated.
> The weewx.sdb was generated.
>
> Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
> backfill of daily summaries
> Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
> packet loop.
> Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
> exiting. Shutting engine down.
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
> [Errno 5] Input/output error
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
> Traceback (most recent call last):
> Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: 
> File "./bin/wee

[weewx-user] weewx beta version 4.0.0b18

[Phil Owers]

Hi Guys

First of all I hope everybody is staying safe and well

Before I go into to many details  should weewx v4.0.0b18 work on its own.

Followed the Installation using setup.py, loaded all the prerequisites for 
Debian 10(Buster)
Installed using python3 ./setup.py build  , sudo python3 ./setup.py install

Entered the name, vantage (6), serial , metric, ttyusb0  etc.

Then started weewx using sudo ./bin/weewx
It downloaded all the data from my test console (This works fine plug into 
another rasp pi v 3.9.2) then failed continuously overnight with no graphs 
being generated.
The weewx.sdb was generated.

Apr  4 10:22:20 raspberrypi weewx[1030] INFO weewx.manager: Starting 
backfill of daily summaries
Apr  4 10:22:22 raspberrypi weewx[1030] INFO weewx.engine: Starting main 
packet loop.
Apr  4 10:22:26 raspberrypi weewx[1030] INFO weewx.engine: Main loop 
exiting. Shutting engine down.
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: Caught OSError: 
[Errno 5] Input/output error
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
Traceback (most recent call last):
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: File 
"./bin/weewxd", line 154, in main
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
engine.run()
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: File 
"/home/weewx/bin/weewx/engine.py", line 191, in run
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
self.dispatchEvent(weewx.Event(weewx.NEW_LOOP_PACKET, packet=packet))
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: File 
"/home/weewx/bin/weewx/engine.py", line 224, in dispatchEvent
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
callback(event)
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__: File 
"/home/weewx/bin/weewx/engine.py", line 740, in new_loop_packet
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
to_sorted_string(event.packet))
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
OSError: [Errno 5] Input/output error
Apr  4 10:22:26 raspberrypi weewx[1030] CRITICAL __main__:   
Waiting 10 seconds then retrying...
Apr  4 10:22:28 raspberrypi kernel: [38075.324656] usb 1-1.3: new 
high-speed USB device number 6 using xhci_hcd

No extensions have been added . Apologies if Ive jumped the gun and this 
doesn't work yet as a standalone
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7c8f08d3-6b37-4126-b135-a7202ab01769%40googlegroups.com.

Re: [weewx-user] Re: weewx 4.0.0b16 stopped working at 02:00 this morning

[Phil Owers]

I also had the same problem and the dump option failed the 1st time it then
partially worked the 2nd time before failing, 3rd time went a bit further.
Not sure if I tried it 4 or 5 times but it did download everthing in the
end. Im using weewx 3.9.2.  Phil

On Sun, 29 Mar 2020, 19:33 Jeff A. D.,  wrote:

> Use the "dump" option.  The dump option does not clear the datalogger so
> you still have the data in the logger available if something goes wrong.
> If you clear memory you lose the data in the logger.
>
> On Sunday, March 29, 2020 at 9:56:03 AM UTC-6, Mike Revitt wrote:
>>
>>
>> Thanks Phil,
>>
>> Never had to do it for the spring clock change before though.
>>
>> Do you know what the difference between dump and clear memory is?
>>
>>
>> On Sunday, March 29, 2020 at 3:19:29 PM UTC+1, Phil Green wrote:
>>>
>>> Because of DST coming into play at 2am I stop Weewx and ran
>>> wee_device —clear-memory
>>> Then restart Weewx
>>> I have to do this in autumn too when the clocks change again.
>>> Seems to work for me every time change.
>>> I am running Vantage Vue with Weewx 3.9.2
>>>
>>> Regards
>>> Phil
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/0183c7a8-237e-431a-bd21-b52861a48d6b%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pPX%2B-D-bKX0ReXXwMZb1hJ7bj%2B4WRCsXFXhHKz-w6_eHw%40mail.gmail.com.

Re: [weewx-user] Re: Cant download Uk Met Office forecast

[Phil Owers]

Thanks Mike that worked.
Strange way to go about things though from the Met Office. They did tell me
Datapoint is to be replaced by DataHub. Perhaps its there way of changing.
Thanks again Phil

On Sun, 1 Mar 2020, 17:36 Mike Hawkins,  wrote:

> Hi, yes, sorry the last email was a bit of a dump and run as I was in a
> hurry.
>
> I have attached a forecast.py file with the two added and one modified
> line.  This is at line 3280.  I have changed
>
> try:
> response = urllib2.urlopen(u)
> return response.read()
>
>
>
> to:
> try:
> req = urllib2.Request(u)
> req.add_header('User-Agent', 'Mozilla/5.0')
> response = urllib2.urlopen(req)
> return response.read()
>
>
> the file to edit or replace is user/forecast.py.  The shorter user-agent
> seems to work just as well as the longer one.
>
> Hope it works for you
>
> Mike
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/6ef7dbb2-b6cf-45b6-9eb8-dc07cef5930c%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pNF10UhLUv5Vp7acEbiGBZpw9ReE9CTpfs8eYSgZNi99Q%40mail.gmail.com.

[weewx-user] Re: Cant download Uk Met Office forecast

[Phil Owers]

Hi Mike

Sorry to be a pain but did you modify or add and if you added could you 
explain where.

Phil

On Saturday, February 29, 2020 at 6:38:50 PM UTC, Phil Owers wrote:
>
> Hi Guys
> Have 2 raspberry pi each running to a vantage pro. Both stopped 
> downloading uk met office forecasts (2 api keys) on the 25 feb.  The log 
> suggests HTTP Error 403 Forbidden.  If i put the 
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=api
>  
> key into a browser it has data. Has anybody else had this problem.  Nothing 
> has changed on the rasberry as both have been working without intervention 
> since 3.9.2 many weeks ago.  Thanks for any help Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/6d89d68a-a2e4-47cd-8dfe-8340ed78c872%40googlegroups.com.

[weewx-user] Re: Cant download Uk Met Office forecast

[Phil Owers]

The UK Met Office has now raised an issue with there datapoint services but 
did suggest to try

Could you try the following : change the User-Agent to
'Mozilla/5.0'. It could be that the user agent of 'python/urllib/2.5' is 
the issue. This worked for some users.


Not sure what that means

Phil


On Saturday, February 29, 2020 at 6:38:50 PM UTC, Phil Owers wrote:
>
> Hi Guys
> Have 2 raspberry pi each running to a vantage pro. Both stopped 
> downloading uk met office forecasts (2 api keys) on the 25 feb.  The log 
> suggests HTTP Error 403 Forbidden.  If i put the 
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=api
>  
> key into a browser it has data. Has anybody else had this problem.  Nothing 
> has changed on the rasberry as both have been working without intervention 
> since 3.9.2 many weeks ago.  Thanks for any help Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/98825d52-82d2-4ebb-9541-0537967bdd78%40googlegroups.com.

[weewx-user] Re: Cant download Uk Met Office forecast

[Phil Owers]

This is the first few lines of what I get back from the datapoint url on my 
browser

{"SiteRep":{"Wx":{"Param":[{"name":"F","units":"C","$":"Feels Like 
Temperature"},{"name":"G","units":"mph","$":"Wind 
Gust"},{"name":"H","units":"%","$":"Screen Relative 
Humidity"},{"name":"T","units":"C","$":"Temperature"},{"name":"V","units":"","$":"Visibility"},{"name":"D","units":"compass","$":"Wind
 
Direction"},{"name":"S","units":"mph","$":"Wind 
Speed"},{"name":"U","units":"","$":"Max UV 
Index"},{"name":"W","units":"","$":"Weather 
Type"},{"name":"Pp","units":"%","$":"Precipitation 
Probability"}]},"DV":{"dataDate":"2020-03-01T10:00:00Z","type":"Forecast","Location":{"i":"354731","lat":"52.9456","lon":"1.212","name":"SHERINGHAM
 
(BEACH)","country":"ENGLAND","continent":"EUROPE","elevation":"0.0","Period":[{"type":"Day","value":"2020-03-01Z","Rep":[{"D":"SW","F":"-2","G":"40","H":"78","Pp":"0","S":"25","T":"4","V":"GO","W":"0","U":"0","$":"360"},{"D":"SW","F":"-1","G":"40","H":"72","Pp":"0","S":"27","T":"5","V":"VG","W":"1","U":"1","$":"540"},{"D":"SW","F":"2","G":"38","H":"63","Pp":"1","S":"25","T":"7","V":"VG","W":"1","U":"2","$":"720"},{"

Can anybody spot any changes that may give us the HTTP 403 Error.

Thanks Phil
On Saturday, February 29, 2020 at 6:38:50 PM UTC, Phil Owers wrote:
>
> Hi Guys
> Have 2 raspberry pi each running to a vantage pro. Both stopped 
> downloading uk met office forecasts (2 api keys) on the 25 feb.  The log 
> suggests HTTP Error 403 Forbidden.  If i put the 
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=api
>  
> key into a browser it has data. Has anybody else had this problem.  Nothing 
> has changed on the rasberry as both have been working without intervention 
> since 3.9.2 many weeks ago.  Thanks for any help Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/00bb5301-be20-4c6f-b241-713e26809df8%40googlegroups.com.

Re: [weewx-user] Re: Cant download Uk Met Office forecast

[Phil Owers]

I was in contact with enquir...@metoffice.gov.uk yesterday but they thought
it was more my end than theres.  Now others are reporting the same issue
perhaps if we all send them an email to the above address they might start
to think its there end. I did create a new account with a new API but also
failed.  Unless of course somebody has another theory.  Phil

On Sun, 1 Mar 2020, 10:18 'Ben B' via weewx-user, <
weewx-user@googlegroups.com> wrote:

> Hi all
>
> Yes I have this 403 issue too - checked my Met Office account and no issue
> there as account and API key active and nothing changed on the Pi or weewx.
> Using weewx v3.8 and Forecast 3.3.2.  Need some help please!
>
> forecast: UKMOThread: UKMO: download forecast from '
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354123?res=3hourly=8995
> '
>
> forecast: UKMOThread: UKMO: failed attempt 1 to download forecast: HTTP
> Error 403: Forbidden
>
> Thanks, Ben.
>
> On Saturday, 29 February 2020 18:38:50 UTC, Phil Owers wrote:
>>
>> Hi Guys
>> Have 2 raspberry pi each running to a vantage pro. Both stopped
>> downloading uk met office forecasts (2 api keys) on the 25 feb.  The log
>> suggests HTTP Error 403 Forbidden.  If i put the
>> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=api
>> key into a browser it has data. Has anybody else had this problem.  Nothing
>> has changed on the rasberry as both have been working without intervention
>> since 3.9.2 many weeks ago.  Thanks for any help Phil
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/6cd01ffe-a138-4ea9-b95b-599aa4fe3441%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/6cd01ffe-a138-4ea9-b95b-599aa4fe3441%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pM58Q%2B5rMKpLySSbcWkjyb5v8C-PBV3KuUNdP6tLhrVZw%40mail.gmail.com.

[weewx-user] Cant download Uk Met Office forecast

[Phil Owers]

Hi Guys
Have 2 raspberry pi each running to a vantage pro. Both stopped downloading uk 
met office forecasts (2 api keys) on the 25 feb.  The log suggests HTTP Error 
403 Forbidden.  If i put the 
http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/json/354731?res=3hourly=api
 key into a browser it has data. Has anybody else had this problem.  Nothing 
has changed on the rasberry as both have been working without intervention 
since 3.9.2 many weeks ago.  Thanks for any help Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/9eff58cd-a4d1-425c-8583-d3f6d9b6adaf%40googlegroups.com.

Re: [weewx-user] Re: crash of my weather station

[Phil Owers]

When I started with raspberry pi it came with pre-loaded software one of
which was noobs.  In there I found an SD card copier app. I use that ,
amongst other things, to back up the entire system plus weewx. I have put
the backup SD card into another pi and it works fine as it does in the pi
it was copied from. Ive never seen this mentioned on this forum but its an
easy way to back up valuable data. Just a thought Phil

On Tue, 7 Jan 2020, 14:01 Thomas Keffer,  wrote:

> It's also important to use a high-quality power supply.
>
> A small uninterruptible power supply (UPS) also helps. Like this
> 
> .
>
> -tk
>
> On Tue, Jan 7, 2020 at 6:53 AM salinois  wrote:
>
>> thanks Thomas
>>
>> I am going to search this model because an other crash since 1 hour of my
>> SD Card !!!
>>
>> this is the time to do somethings
>>
>> patrick
>> Le 07/01/2020 à 14:50, Thomas Keffer a écrit :
>>
>> It's a 16 GB Sandisk Extreme Plus. Something like this
>> .
>> But, keep in mind, this is now a 5+ year old model. There are probably
>> better choices now.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/weewx-user/c7b6825c-8e93-1f27-ab35-805a93347478%40gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/CAPq0zED_4Tdf-L0jDvGvSd7f5PZ7UDNCXphF%2Bag9KUj9LdUcxg%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pMLN0OnAp4yexMyhaWOo1j-7cr2BXkqwBy47DteFpuouw%40mail.gmail.com.

[weewx-user] Re: weewxaverage extension

[Phil Owers]

Hi Gary
Yep confirmed the files were where they should be so as you mentioned it 
got me thinking about permissions and it maybe useful for others.
To cut a long story short my web server only hosts windows type web sites 
which need a web.config file to give it clues as to what to do with certain 
things.
So I added an empty web.config and added the following (which I admit I got 
from searching good old google.

 
 
 
 
 
 
 


It now works OK so thanks to you and eveybody else.
Phil

 


On Friday, July 19, 2019 at 8:30:30 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> I had trouble with the average extension back end of last year and thanks 
> to Gary he put me right. I'm changing over to a new server and I'm having 
> trouble again
>
> The old is on http://www.sheringhamweather.org.uk/averages.html  and 
> works.
>
> The new looks to be set up the same but the graph is empty.  Ive look 
> through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
> my understanding of it is limited but it looks similar as the files look 
> the same.  
> You can look at this at 
> http://www.sheringhamukweather.org.uk/averages.html   
>
> The problem is the same what ever browser I use and I have deleted the 
> browsing history as Ive had problems with that especially if I change an 
> icon on the forecast.
>
> Any help would be appreciated Thanks Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/212625d6-b30f-4ae2-bf14-2691b5f57d68%40googlegroups.com.

[weewx-user] Re: weewxaverage extension

[Phil Owers]

I should also add that when I go into my new web server and find 
averages.json the properties are
/sheringhamukweather.org.uk/wwwroot/json/averages.json

Is that a clue

Phil

On Friday, July 19, 2019 at 8:30:30 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> I had trouble with the average extension back end of last year and thanks 
> to Gary he put me right. I'm changing over to a new server and I'm having 
> trouble again
>
> The old is on http://www.sheringhamweather.org.uk/averages.html  and 
> works.
>
> The new looks to be set up the same but the graph is empty.  Ive look 
> through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
> my understanding of it is limited but it looks similar as the files look 
> the same.  
> You can look at this at 
> http://www.sheringhamukweather.org.uk/averages.html   
>
> The problem is the same what ever browser I use and I have deleted the 
> browsing history as Ive had problems with that especially if I change an 
> icon on the forecast.
>
> Any help would be appreciated Thanks Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/64e1832a-e165-48c1-81f5-64157a909a80%40googlegroups.com.

[weewx-user] Re: weewxaverage extension

[Phil Owers]

Hi Gary
The averages.html is in the same directory as index.html (the main 
directory)   The scripts / json sub-directory hang of that.
This is the same as my old server which works OK.

>From the Browser  Control / hsr tag I get
XHRGEThttp://www.sheringhamukweather.org.uk/json/averages.json  [HTTP/1.1 
404 Not Found 32ms]
 
Phil

On Friday, July 19, 2019 at 8:30:30 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> I had trouble with the average extension back end of last year and thanks 
> to Gary he put me right. I'm changing over to a new server and I'm having 
> trouble again
>
> The old is on http://www.sheringhamweather.org.uk/averages.html  and 
> works.
>
> The new looks to be set up the same but the graph is empty.  Ive look 
> through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
> my understanding of it is limited but it looks similar as the files look 
> the same.  
> You can look at this at 
> http://www.sheringhamukweather.org.uk/averages.html   
>
> The problem is the same what ever browser I use and I have deleted the 
> browsing history as Ive had problems with that especially if I change an 
> icon on the forecast.
>
> Any help would be appreciated Thanks Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d826f4c9-5060-4440-9c64-55e77fce1cdb%40googlegroups.com.

Re: [weewx-user] Re: weewxaverage extension

[Phil Owers]

>From memory it says cant open file
www.sheringhamukweather.org.uk/json/averages.json with  a 404 error
number.  Or should l be looking for something else. Phil

On Sat, 20 Jul 2019, 16:09 gjr80,  wrote:

> Yes, can that part ids fixed now but there will be another error
> somewhere, you need to open the page in your browser and then use your
> browsers developer tools to look at the console log, in particular the java
> console log and see what rrrors come up when you refresh the page. That is
> where you will get s clue as to the error.
>
> Unfortunately I am away from home with only an iPad and I can’t view the
> console log on my browser.
>
> Gary
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/cf460458-e617-47df-a2e0-24d663025332%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CALTQ7pOc_XxpEfN%2BvpGpN5oOPeRqujv5yQ9X48LavyoJWQ_3%2Bw%40mail.gmail.com.

[weewx-user] Re: weewxaverage extension

[Phil Owers]

Sorry Gary, either you were to quick or I was to slow.
After I posted I realised I hadn't changed it back to json/averages.json. 
where it is now.  I was playing to see if I could change anything but it 
didn't.
Afraid to say it still fails
Phil

On Friday, July 19, 2019 at 8:30:30 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> I had trouble with the average extension back end of last year and thanks 
> to Gary he put me right. I'm changing over to a new server and I'm having 
> trouble again
>
> The old is on http://www.sheringhamweather.org.uk/averages.html  and 
> works.
>
> The new looks to be set up the same but the graph is empty.  Ive look 
> through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
> my understanding of it is limited but it looks similar as the files look 
> the same.  
> You can look at this at 
> http://www.sheringhamukweather.org.uk/averages.html   
>
> The problem is the same what ever browser I use and I have deleted the 
> browsing history as Ive had problems with that especially if I change an 
> icon on the forecast.
>
> Any help would be appreciated Thanks Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7ff66e12-15f6-4f4a-982d-2fab102756e6%40googlegroups.com.

[weewx-user] Re: weewxaverage extension

[Phil Owers]

Thanks for your time Jerry.
I can see that its failed to open 
http://www.sheringhamukweather.org.uk/json/averages.json but looking on the 
server it has a subdirectory called json

drwxr-xr-x 1 ftp ftp  0 Jul 20 14:44 json 

and it has a file called averages.json will the following in it

[{
"_version": "averages.json.tmpl version 0.5.0",
"temperatureplot": {"series":
{"outTempMeanMinMax": {"name": "Temperature", "data": [[3.0, 7.2], [3.3, 
7.8], [4.2, 10.1], [6.2, 13.0], [9.0, 16.0], [11.9, 19.1], [14.1, 21.5], 
[14.1, 21.2], [12.1, 18.6], [10.1, 15.2], [6.5, 10.8], [4.5, 8.6]]},
"outTempMean": {"name": "Mean Temperature", "data": [5.1, 5.6, 7.1, 9.6, 
12.5, 15.5, 17.8, 17.6, 15.4, 12.7, 8.7, 6.6]},
"outTempMax": {"name": "Maximum Temperature", "data": [15.2, 18.3, 21.8, 
28.3, 28.8, 32.3, 34.1, 30.9, 30.3, 28.2, 17.6, 15.6]},
"outTempMin": {"name": "Minimum Temperature", "data": [-7.9, -5.4, -6.1, 
-0.3, -1.5, 5.1, 9.2, 8.1, 5.3, 2.8, -0.1, -5.9]}},
"yAxisLabel": {"text":  "(\u00B0 C)"
},
"yAxisUnits": {"text":  "\u00B0 C"
}},
"rainplot": {"series":
{"rainAvg": {"name": "Rain", "data": [53.5, 44.7, 43.4, 33.7, 46.0, 47.5, 
44.4, 52.2, 42.9, 62.1, 64.0, 56.5]}},
"yAxisLabel": {"text":  "(mm)"
},
"yAxisUnits": {"text":  "mm"
}},
"generated": "20 July 2019 14:50"
}]

but for some reason it cant see it.   Any more help would be appreciated.
Phil

On Friday, July 19, 2019 at 8:30:30 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> I had trouble with the average extension back end of last year and thanks 
> to Gary he put me right. I'm changing over to a new server and I'm having 
> trouble again
>
> The old is on http://www.sheringhamweather.org.uk/averages.html  and 
> works.
>
> The new looks to be set up the same but the graph is empty.  Ive look 
> through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
> my understanding of it is limited but it looks similar as the files look 
> the same.  
> You can look at this at 
> http://www.sheringhamukweather.org.uk/averages.html   
>
> The problem is the same what ever browser I use and I have deleted the 
> browsing history as Ive had problems with that especially if I change an 
> icon on the forecast.
>
> Any help would be appreciated Thanks Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/22317aa6-4d31-42a9-bc0e-d41ac5313703%40googlegroups.com.

[weewx-user] weewxaverage extension

[Phil Owers]

Hi All

I had trouble with the average extension back end of last year and thanks 
to Gary he put me right. I'm changing over to a new server and I'm having 
trouble again

The old is on http://www.sheringhamweather.org.uk/averages.html  and works.

The new looks to be set up the same but the graph is empty.  Ive look 
through VIEW SOURCE on edge or View Page Source on Firefox and admittedly 
my understanding of it is limited but it looks similar as the files look 
the same.  
You can look at this at http://www.sheringhamukweather.org.uk/averages.html 
  

The problem is the same what ever browser I use and I have deleted the 
browsing history as Ive had problems with that especially if I change an 
icon on the forecast.

Any help would be appreciated Thanks Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/f8a02076-8f5d-44aa-aff9-b6365647d617%40googlegroups.com.

[weewx-user] Re: Forecast from Met Office UK UKMO

[Phil Owers]

On Thursday, April 11, 2019 at 11:54:59 PM UTC+1, gjr80 wrote:
>
> I suspect that is one for Matthew.
>
> Gary
>
> On Thursday, 11 April 2019 22:25:48 UTC+10, Phil Owers wrote:
>>
>>
>>
>> On Sunday, April 7, 2019 at 4:18:53 PM UTC+1, Phil Owers wrote:
>>>
>>> Hi All
>>>
>>> My forecast comes from the UK Met Office and I don't seem to get the 
>>> full forecast.
>>>
>>> If you view 
>>> http://sheringhamweather.ddns.net/forecast/single-stripQnap.html I just 
>>> get a days short summary with no forecast and looking in the forecast.sdb I 
>>> view what I receive
>>>
>>>
>>> But if I go to 
>>>
>>>
>>> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/xml/354731?res=3hourly=
>>> 8f916e8d-7477-4198-8ecc-ae764ff7bb84
>>>
>>> It shows me what I should get.
>>>
>>> Anybody help me to where Im going wrong please
>>>
>>> Thanks Phil
>>>
>>> Thanks Gary
>>>
>> I printed out the forecast.py code and half came to that conclusion but 
>> then I came across  on my Page 62 a section marked UK MET OFFICE 5day/3hour 
>> forecast which stated the full 30 Weather Types which is missing so 
>> wondered why they were missing but then mentioned in the code. 
>> Phil
>>
>
Ive managed to save all data to the forecast.sdb and using .inc files it 
all works fine
So moved on the using the forecast variables method, using the example 

#set $periods = $forecast.weather_periods('UKMO', max_events=1)
#for $period in $periods
$period.event_ts $forecast.label('Weather', $period.clouds)
#end for 
I get the following print out

27-Apr-2019 10:00 OT

Viewing the source code in a browser I get the same thing, so it would 
appear that its reading the database OK.  
The OT is the cloud cover in the dbase so it seems its not putting the .png 
Is there something else to add
Thanks  Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: Forecast from Met Office UK UKMO

[Phil Owers]

On Sunday, April 7, 2019 at 4:18:53 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> My forecast comes from the UK Met Office and I don't seem to get the full 
> forecast.
>
> If you view 
> http://sheringhamweather.ddns.net/forecast/single-stripQnap.html I just 
> get a days short summary with no forecast and looking in the forecast.sdb I 
> view what I receive
>
>
> But if I go to 
>
>
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/xml/354731?res=3hourly=
> 8f916e8d-7477-4198-8ecc-ae764ff7bb84
>
> It shows me what I should get.
>
> Anybody help me to where Im going wrong please
>
> Thanks Phil
>
> Thanks Gary
>
I printed out the forecast.py code and half came to that conclusion but 
then I came across  on my Page 62 a section marked UK MET OFFICE 5day/3hour 
forecast which stated the full 30 Weather Types which is missing so 
wondered why they were missing but then mentioned in the code. 
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: Forecast from Met Office UK UKMO

[Phil Owers]

On Sunday, April 7, 2019 at 4:18:53 PM UTC+1, Phil Owers wrote:
>
> Hi All
>
> My forecast comes from the UK Met Office and I don't seem to get the full 
> forecast.
>
> If you view 
> http://sheringhamweather.ddns.net/forecast/single-stripQnap.html I just 
> get a days short summary with no forecast and looking in the forecast.sdb I 
> view what I receive
>
>
> But if I go to 
>
>
> http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/xml/354731?res=3hourly=
> 8f916e8d-7477-4198-8ecc-ae764ff7bb84
>
> It shows me what I should get.
>
> Anybody help me to where Im going wrong please
>
> Thanks Phil
>
> Let me explain this another way
>
Using UK Met office  I don't get any forecast icons in the display.  
Looking under the met office 3hr definitions they send out a weather type 
an example is below
Weather types 
ValueDescription
NA Not available 
0 Clear night 
1 Sunny dayThe description goes up to a VALUE of 30

Looking in the forecast.sdb I don't see any of the above, the database has 
a clouds field name but it has a NULL value.
So my question is does anybody else download from UKMO and have the same 
problem or is it just me
Thanks Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Forecast from Met Office UK UKMO

[Phil Owers]

Hi All

My forecast comes from the UK Met Office and I don't seem to get the full 
forecast.

If you 
view http://sheringhamweather.ddns.net/forecast/single-stripQnap.html I 
just get a days short summary with no forecast and looking in the 
forecast.sdb I view what I receive


But if I go to 

http://datapoint.metoffice.gov.uk/public/data/val/wxfcs/all/xml/354731?res=3hourly=
8f916e8d-7477-4198-8ecc-ae764ff7bb84

It shows me what I should get.

Anybody help me to where Im going wrong please

Thanks Phil


-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: No updates since 2am start of British Summer Time

[Phil Owers]

As an update, my second rpi although it failed clear memory and dump
commands must have done some good as it started working again shortly after
i did the dump command. Phil O

On Mon, 1 Apr 2019, 16:55 Phil Green,  wrote:

> Hi
> Why do you need to do a ‘dump’ command when you do the clear-memory?
>
> Yes would be interested in a cron script.
> I presume the same one to be run twice a year when the clocks change
> forwards & backwards?
> Regards
> Phil
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: No updates since 2am start of British Summer Time

[Phil Owers]

Thanks.
The rpi/davis console which I de_powered worked perfectly with --dump, i didnt 
try -clear--memory on this set up so thanks for that as it only missed 2 
timestamps.
The other one (only rebooted) failed clear--memory also failed --dump which i 
have a screen jpg off. It seemed to fail on the same time stamp at 0410 this 
morning. I can download the failure but not till tommorrow when i can explore 
more. Again to both thanks for your time and also the url with notes regarding 
this problem
Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: No updates since 2am start of British Summer Time

[Phil Owers]

Hi Phil. Thanks for the reply but I get  
wee_device error: no such option -c when i tried. 

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] No updates since 2am start of British Summer Time

[Phil Owers]

Hi All
Have 2 vantage pro,s each working to its own raspberry and both stopped 
downloading from the davis console at 2am this morning which is when the clocks 
moved forward 1hr in the UK. Both davis consoles had the correct new time on 
there screen. On one of them  I de-powered the davis console (batteries out as 
well) and the raspberry and then powered them both up, as yet still no new 
downloads.  On the 2nd one I just re-booted, that didnt work either. Weewx is 
downloading to the web pages as the times are changing so it would appear that 
the davis console may be the problem. Using minicom from both rpi's they both 
return TEST ok.  Incidentally when the clocks went back last October they were 
both ok. Im working at strange times at the moment so replying make take a 
while  but any clues would  be very helpfull. Weewx version is still 3.8.2 
Thanks for your time Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Database error

[Phil Owers]

Thomas
Using SQLITE on my raspberry with the 7" screen attached to it SQLITE was
twice the size and I couldn't get it smaller so was very difficult to use,
therefore decided to try it on the laptop with the bigger screen plus the
fact as I had a lot to change I could take it work and do the adjustments
there in between trsins. Hope my boss doesn't see this ???

On Wed, 31 Oct 2018, 15:51 Jules,  wrote:

> It worked!  installed Sqlite3 on my Pi, dumped, rebuilt, no more errors!
>
> Thanks again.
>
>
>
> On Wednesday, 31 October 2018 12:41:57 UTC, Jules wrote:
>>
>> Hi,
>>
>> I'm seeing database is malformed errors.  I've searched and found post on
>> how to fix this by running sqlite3 and dumping to ascii and re-importing.
>>
>> My problem is running sqlite3 !  My weewx Pi doesn't respond to sqlite3
>> as a command (I thought weewx used sqlite3?).  Do I install sqlite3 on my
>> weewx Pi or will that cause problems?
>>
>> I've tried installing the sqlite3 utilites on my windows machine.  I can
>> make it dump my weewx.sdb to my screen but can't work out how to make it
>> send it back to a new file - it doesn't chcuk an error but also doesn't
>> create the file.
>>
>> Can anyone point me in the right direction?
>>
>> Thanks,
>>
>>
>> Jules
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Database error

[Phil Owers]

I downloaded DB Browser for SQLITE windows edition on to my laptop. Stopped
weeewx throughout the process. Took a copy weewx file.sdb ,opened it up in
the above software and made the changes and then WRITE then to the
database. Took the new copy back to weeewx ,start weeewx and wait till it
adds all the new records. Once that's done I used wee_database --drop-daily
and rebuild-daily so the new data is seen, then delete the NOAA reports
that were affected so weeewx can create the new NOAA reports.  Also take a
copy of the original weewx.sdb just in case. Have used this method several
times but be carefully with adding new data and don't leave blanks as weewx
didn't like it.
Phil

On 31 Oct 2018 13:00, "Thomas Keffer"  wrote:

Not all versions of Linux include the utility sqlite3. You may have to
install it. How to do so depends on your operating system. If you use
Debian,

sudo apt-get install sqlite3

will generally do it.

-tk

On Wed, Oct 31, 2018 at 5:41 AM Jules  wrote:

> Hi,
>
> I'm seeing database is malformed errors.  I've searched and found post on
> how to fix this by running sqlite3 and dumping to ascii and re-importing.
>
> My problem is running sqlite3 !  My weewx Pi doesn't respond to sqlite3 as
> a command (I thought weewx used sqlite3?).  Do I install sqlite3 on my
> weewx Pi or will that cause problems?
>
> I've tried installing the sqlite3 utilites on my windows machine.  I can
> make it dump my weewx.sdb to my screen but can't work out how to make it
> send it back to a new file - it doesn't chcuk an error but also doesn't
> create the file.
>
> Can anyone point me in the right direction?
>
> Thanks,
>
>
> Jules
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
-- 
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an
email to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Changing Tide times on the tide.html

[Phil Owers]

Thanks Thomas for your quick reply I will give that a go although I was
having problems getting it to a variable. Phil

On Tue, 30 Oct 2018, 00:10 Thomas Keffer,  wrote:

> I'm not familiar with the search list used by $tide, but if it works like
> the others, it is actually returning an instance of ValueHelper, which
> does not support arithmetic. You need an actual number, which requires the "
> .raw" suffix: $tide.event_ts.raw
>
>
>
> On Mon, Oct 29, 2018 at 4:48 PM Phil Owers 
> wrote:
>
>> Hi Guys
>> The nearest place I can get tide times using XTides is 8 minutes
>> difference to where I live and was wondering if its possible to change this
>> in the tide.html.tmpl template using the tide.event_ts field in the
>> forecast db.
>> As this field stores the time in epoch Ive been trying to just take 480
>> from it.
>> Using weewx v 3.8.2
>>
>> Any help would be appreciated Thanks Phil
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to weewx-user+unsubscr...@googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Changing Tide times on the tide.html

[Phil Owers]

Hi Guys
The nearest place I can get tide times using XTides is 8 minutes difference 
to where I live and was wondering if its possible to change this in the 
tide.html.tmpl template using the tide.event_ts field in the forecast db.
As this field stores the time in epoch Ive been trying to just take 480 
from it.
Using weewx v 3.8.2

Any help would be appreciated Thanks Phil

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: weewx-averages extension

[Phil Owers]

Gary
I copied the json sub-directory   to my root directory and it worked.
I now have the averages.html and averages .json files in my root directory
scripts sub- directory containing the average.js and theme.js
json sub directory containing the scripts sub directory and the 
averages.html and averages.json

If I point my average hyperlink (index page)to the average.html in the root 
directory it works
If I point my average hyperlink (index page) to the average.html in the 
json sub-directory it doesn't work

You can view the web site at  http://www.sheringhamweather.com 

Phil


On Thursday, October 11, 2018 at 12:35:24 PM UTC+1, gjr80 wrote:
>
> Phil,
>
> The lines I highlighted suggest there is a syntax error in averages.js and 
> theme.js accessed by your web server. The averages skin should be copying 
> these files unchanged from the averages skin directory to a location that 
> is accessed by your web server. What I wanted you to do was to rule out 
> these files having been changed or otherwise corrupted somewhere along the 
> way. Hence asking you to compare what is being used by your web server 
> against what is on github. Downloading and reinstalling the files does not 
> necessarily prove they are good, especially if something is occurring 
> somewhere during installation/execution to corrupt them.
>
> If the web server versions are the same as on github I suspect there is 
> something else going on that manifests itself as syntax errors in these 
> files. Since your site is not visible publicly I would like to get a 
> picture of where the various files are on your system. Can you give me the 
> full path to the following files on your web server:
>
> averages.html
> averages.js
> theme.js
> averages.json
>
> If you are running your web server on your WeeWX machine it is likely 
> these files are somewhere in /home/weewxpublic_html or /var/www/html.
>
> Can you also give me the URL you are using to access averages.html in your 
> browser. Not so much interested in the server address but the path that is 
> used to get to averages.html
>
> Unfortunately I am interstate until 22 October so am somewhat limited as 
> to what troubleshooting I can do.
>
> Gary
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: weewx-averages extension

[Phil Owers]

Hi Gary
Downloaded the zip file from the GitHub website and still the same

SyntaxError: unexpected token: ':' theme.js:1:11
SyntaxError: unexpected token: ':' averages.js:1:11

Looking at averages.js starting at line 1 the next few lines are

/**
 * Theme distributed with Averages weewx extension
 * Based on Gray theme for Highcharts JS by Torstein Honsi
 **/
Highcharts.theme = {
chart: {
backgroundColor: 'rgb(208, 208, 208)',
borderWidth: 1,
borderColor: '#00',
borderRadius: 8,
plotShadow: false,
plotBorderWidth: 0,
},
colors: ["#B44242", "#4242B4", "#42B442", "#DF5353", "#aa", 
"#ff0066", "#eeaaee",
"#55BF3B", "#DF5353", "#7798BF", "#aa"],
labels: {
style: {
color: '#CCC'
}
},


On Wednesday, October 10, 2018 at 3:37:49 PM UTC+1, gjr80 wrote:
>
> Yep, this is not right:
>
> SyntaxError: unexpected token: ':' theme.js:1:11
> SyntaxError: unexpected token: ':' averages.js:1:11
>
> Have a look at averages.js on your web server, is it the same as 
> skins/HighchartsAverages/scripts/averages.js on your WeeWX machine and is 
> that the same as averages.js in the GitHub repo 
> <https://github.com/gjr80/weewx-averages/blob/master/skins/HighchartsAverages/scripts/averages.js>?
>  
> The error indicates a problem on lien 1 position 11 but my my reckoning 
> that is a comment.
>
> Gary
>
> On Wednesday, 10 October 2018 23:57:45 UTC+10, Phil Owers wrote:
>>
>> I used firefox. As a first attempt, is this what you mean
>>  [Show/hide message details.] TelemetryStopwatch: key 
>> "TELEMETRY_PENDING_LOAD_MS" was already initialized 
>> TelemetryStopwatch.jsm:352
>> [Show/hide message details.] TelemetryStopwatch: requesting elapsed time 
>> for nonexisting stopwatch. Histogram: "TELEMETRY_PENDING_LOAD_MS", key: 
>> "null"
>> TelemetryStopwatch.jsm:373
>> SyntaxError: unexpected token: ':' theme.js:1:11
>> SyntaxError: unexpected token: ':' averages.js:1:11
>> IndexedDB UnknownErr: ActorsParent.cpp:13930
>> [Show/hide message details.] SearchSuggestionController: Cannot stop 
>> fetching if remote results were not requested
>> SearchSuggestionController.jsm:169
>> Empty string passed to getElementById(). ee9f5ae1.js:3:2617
>> Use of Mutation Events is deprecated. Use MutationObserver instead. 
>> ee8d79e1.js:1:1409
>> SyntaxError: unexpected token: ':' theme.js:1:11
>> SyntaxError: unexpected token: ':' averages.js:1:11
>>
>> On Wednesday, October 10, 2018 at 11:53:35 AM UTC+1, Phil Owers wrote:
>>>
>>> Hi Guys
>>> Downloaded the weewx-averages extension a few days ago but cant get 
>>> anything on the averages.html
>>> I changed the report_timing to @daily to get it started and appears that 
>>> the averages.json file has data in it
>>>
>>> [{
>>> "_version": "averages.json.tmpl version 0.5.0",
>>> "temperatureplot": {"series":
>>> {"outTempMeanMinMax": {"name": "Temperature", "data": [[3.0, 7.2], [3.1, 
>>> 7.4], [4.0, 9.9], [6.2, 13.1], [9.0, 16.1], [11.9, 19.1], [14.1, 21.5], 
>>> [14.1, 21.2], [12.1, 18.6], [10.2, 15.2], [6.4, 10.7], [4.4, 8.5]]},
>>> "outTempMean": {"name": "Mean Temperature", "data": [5.1, 5.2, 7.0, 9.6, 
>>> 12.6, 15.5, 17.8, 17.6, 15.4, 12.7, 8.6, 6.5]},
>>> "outTempMax": {"name": "Maximum Temperature", "data": [15.2, 17.6, 21.8, 
>>> 28.3, 28.8, 32.3, 34.1, 30.9, 30.3, 28.2, 17.6, 15.6]},
>>> "outTempMin": {"name": "Minimum Temperature", "data": [-7.9, -5.4, -6.1, 
>>> -0.3, -1.5, 5.1, 9.2, 8.1, 5.3, 2.8, -0.1, -5.9]}},
>>> "yAxisLabel": {"text":  "(\u00B0 C)"
>>> },
>>> "yAxisUnits": {"text":  "\u00B0 C"
>>> }},
>>> "rainplot": {"series":
>>> {"rainAvg": {"name": "Rain", "data": [54.6, 46.0, 43.0, 36.5, 48.3, 
>>> 42.4, 44.4, 52.2, 42.9, 62.1, 65.3, 55.1]}},
>>> "yAxisLabel": {"text":  "(mm)"
>>> },
>>> "yAxisUnits": {"text":  "mm"
>>> }},
>>> "generated": "10 October 2018 00:00"
>>> }]
>>>
>>> but the averages.html is blank
>>>
>>> The ave

[weewx-user] Re: weewx-averages extension

[Phil Owers]

I used firefox. As a first attempt, is this what you mean
 [Show/hide message details.] TelemetryStopwatch: key 
"TELEMETRY_PENDING_LOAD_MS" was already initialized 
TelemetryStopwatch.jsm:352
[Show/hide message details.] TelemetryStopwatch: requesting elapsed time 
for nonexisting stopwatch. Histogram: "TELEMETRY_PENDING_LOAD_MS", key: 
"null"
TelemetryStopwatch.jsm:373
SyntaxError: unexpected token: ':' theme.js:1:11
SyntaxError: unexpected token: ':' averages.js:1:11
IndexedDB UnknownErr: ActorsParent.cpp:13930
[Show/hide message details.] SearchSuggestionController: Cannot stop 
fetching if remote results were not requested
SearchSuggestionController.jsm:169
Empty string passed to getElementById(). ee9f5ae1.js:3:2617
Use of Mutation Events is deprecated. Use MutationObserver instead. 
ee8d79e1.js:1:1409
SyntaxError: unexpected token: ':' theme.js:1:11
SyntaxError: unexpected token: ':' averages.js:1:11

On Wednesday, October 10, 2018 at 11:53:35 AM UTC+1, Phil Owers wrote:
>
> Hi Guys
> Downloaded the weewx-averages extension a few days ago but cant get 
> anything on the averages.html
> I changed the report_timing to @daily to get it started and appears that 
> the averages.json file has data in it
>
> [{
> "_version": "averages.json.tmpl version 0.5.0",
> "temperatureplot": {"series":
> {"outTempMeanMinMax": {"name": "Temperature", "data": [[3.0, 7.2], [3.1, 
> 7.4], [4.0, 9.9], [6.2, 13.1], [9.0, 16.1], [11.9, 19.1], [14.1, 21.5], 
> [14.1, 21.2], [12.1, 18.6], [10.2, 15.2], [6.4, 10.7], [4.4, 8.5]]},
> "outTempMean": {"name": "Mean Temperature", "data": [5.1, 5.2, 7.0, 9.6, 
> 12.6, 15.5, 17.8, 17.6, 15.4, 12.7, 8.6, 6.5]},
> "outTempMax": {"name": "Maximum Temperature", "data": [15.2, 17.6, 21.8, 
> 28.3, 28.8, 32.3, 34.1, 30.9, 30.3, 28.2, 17.6, 15.6]},
> "outTempMin": {"name": "Minimum Temperature", "data": [-7.9, -5.4, -6.1, 
> -0.3, -1.5, 5.1, 9.2, 8.1, 5.3, 2.8, -0.1, -5.9]}},
> "yAxisLabel": {"text":  "(\u00B0 C)"
> },
> "yAxisUnits": {"text":  "\u00B0 C"
> }},
> "rainplot": {"series":
> {"rainAvg": {"name": "Rain", "data": [54.6, 46.0, 43.0, 36.5, 48.3, 42.4, 
> 44.4, 52.2, 42.9, 62.1, 65.3, 55.1]}},
> "yAxisLabel": {"text":  "(mm)"
> },
> "yAxisUnits": {"text":  "mm"
> }},
> "generated": "10 October 2018 00:00"
> }]
>
> but the averages.html is blank
>
> The averages.json file is in the HTML_ROOT/Jason folder and the 
> averages.html is in HTMT_ROOT folder
>
> The [[HighChartsAverages]] section in the weewx.conf is
>
> [[HighchartsAverages]]
> report_timing = @daily
> skin = HighchartsAverages
> [[[Units]]]
> StringFormats
> inch = %.2f
> mm = %.1f
> degree_F = %.1f
> cm = %.2f
> degree_C = %.1f
> TimeFormats
> current = %-d %B %Y %H:%M
> Groups
> group_temperature = degree_C
> group_rain = mm
> [[[CopyGenerator]]]
> copy_once = scripts/averages.js, scripts/theme.js, 
> averages.html
> [[[Generators]]]
> generator_list = weewx.cheetahgenerator.CheetahGenerator, 
> weewx.reportengine.CopyGe$
>
> I loaded the extension using wee_extension --install= 
>
> Weewx is version 3.8.2 and I have data in the sdb file back to 2010
>
> Am I being in to much of a rush or have I missed something
> Any help would be most welcome
> Thanks in advance
> Phil
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.