Re: [WISPA] UBNT repeater
On Wed, Oct 13, 2010 at 9:05 PM, Jerry Richardson jrichard...@aircloud.com wrote: But I think that there is a version of openwrt or ddwrt for ubnt ns2? Any of the Atheros specific firmware images for OpenWRT or DD-WRT should load on the ns2. I think this is what you would need: http://downloads.openwrt.org/backfire/10.03-rc3/atheros/ openwrt-atheros-ubnt2-squashfs.bin 02-Apr-2010 16:02 2752920 I haven't tested it against the ns2 though, but it shouldn't hurt to try; you can always use the ubnt utility to flash it back to stock firmware. Jerry Richardson Sent Mobile On Oct 13, 2010, at 6:06 PM, Chuck Profito cprof...@cv-access.com wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ATT1.c WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Silver Lining Networks http://slwifi.com/ http://twitter.com/slwifi o: 888.334.6602 m: 415.720.2103 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Or just get a Deliberant Duo and be done with it... :-) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Fred Moyer Sent: Wednesday, October 13, 2010 9:05 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater On Wed, Oct 13, 2010 at 6:09 PM, Greg Ihnen os10ru...@gmail.com wrote: But I think in the open mesh thing the units are in the ad-hoc mode. I thought someone said there was some way for the unit to repeat an AP. You can bridge the units together using WDS. I'm *pretty sure* that you can connect them back to back with cat5 to get basically a dual radio setup and push full speed over one hop: base unit = wds backhaul = receiver wds = ubnt configured as access point If you go ad hoc, you'll lose 50% of your speed over a one hop link. If you have a cheap linksys router, you can create a triple radio and go full speed up to 4 or 5 hops. I've done this with Engenius gear (with 5ghz for the backhaul), I learned it from a guy who has done it several hops deep with the Ubiquiti gear. Greg On Oct 13, 2010, at 8:36 PM, Chuck Profito wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] on Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] on Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Thanks. I thought I had read somewhere that there was a way to use the UBNT gear as a repeater or extender (not WDS) that involved something like leaving the ssid blank, and the unit would act as a client to the nearest open network but also act as an AP allowing it to repeat (extend) the open network it found. Maybe I dreamt about about it. Greg On Oct 12, 2010, at 11:23 PM, Robert West wrote: I use UBNT as a repeater by using a NanoM that has a secondary Ether and plug a second radio in it pointing to where I want to go and set it also as an AP, not WDS, with a different channel. Gets me around corners as in clumps of trees or whatever. Never had the SSID blank but I have set some SSID to ANY which will allow anyone to connect with zero security. Albert- (Formally Bob) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Tuesday, October 12, 2010 9:54 PM To: WISPA General List Subject: [WISPA] UBNT repeater I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Thanks. I thought I had read somewhere that there was a way to use the UBNT gear as a repeater or extender (not WDS) that involved something like leaving the ssid blank, and the unit would act as a client to the nearest open network but also act as an AP allowing it to repeat (extend) the open network it found. Maybe I dreamt about about it. On Oct 12, 2010, at 10:32 PM, Josh Luthman wrote: If it isn't doing WDS you need to a) plug into the station or b) plug an AP into that same station. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 12, 2010 at 10:53 PM, RickG rgunder...@gmail.com wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.commailto:os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.orgmailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
You could always set they up by hand in the CLI, but really, single radio repeaters cause as much issues as they 'solve'. On Wed, Oct 13, 2010 at 4:00 PM, Greg Ihnen os10ru...@gmail.com wrote: Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Dunno, but I once duct taped two NANOs together facing one another and cranked up the power beyond legal limits. After three days they turned into a kitten. As in your case, I actually dreamt it although I remained quite disturbed for many weeks afterwards Lenny- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 7:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089 http://ubnt.com/forum/showthread.php?t=24089highlight=repeater highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
I like yours better. Greg On Oct 13, 2010, at 8:30 PM, Robert West wrote: Dunno, but I once duct taped two NANOs together facing one another and cranked up the power beyond legal limits. After three days they turned into a kitten. As in your case, I actually dreamt it although I remained quite disturbed for many weeks afterwards Lenny- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 7:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
You mean like open mesh with picos? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089 http://ubnt.com/forum/showthread.php?t=24089highlight=repeater highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
But I think in the open mesh thing the units are in the ad-hoc mode. I thought someone said there was some way for the unit to repeat an AP. Greg On Oct 13, 2010, at 8:36 PM, Chuck Profito wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
On Wed, Oct 13, 2010 at 6:09 PM, Greg Ihnen os10ru...@gmail.com wrote: But I think in the open mesh thing the units are in the ad-hoc mode. I thought someone said there was some way for the unit to repeat an AP. You can bridge the units together using WDS. I'm *pretty sure* that you can connect them back to back with cat5 to get basically a dual radio setup and push full speed over one hop: base unit = wds backhaul = receiver wds = ubnt configured as access point If you go ad hoc, you'll lose 50% of your speed over a one hop link. If you have a cheap linksys router, you can create a triple radio and go full speed up to 4 or 5 hops. I've done this with Engenius gear (with 5ghz for the backhaul), I learned it from a guy who has done it several hops deep with the Ubiquiti gear. Greg On Oct 13, 2010, at 8:36 PM, Chuck Profito wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] on Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] on Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wirel...@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Maybe that's it. Jerry Richardson Sent Mobile On Oct 13, 2010, at 6:06 PM, Chuck Profito cprof...@cv-access.commailto:cprof...@cv-access.com wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen mailto:os10ru...@gmail.comos10ru...@gmail.commailto:os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/http://signup.wispa.org/ WISPA Wireless List: mailto:wireless@wispa.org wireless@wispa.orgmailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wirelesshttp://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/http://signup.wispa.org/ WISPA Wireless List: mailto:wireless@wispa.org wireless@wispa.orgmailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wirelesshttp://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ http://lists.wispa.org/pipermail/wireless/ ATT1.c WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
But I think that there is a version of openwrt or ddwrt for ubnt ns2? Jerry Richardson Sent Mobile On Oct 13, 2010, at 6:06 PM, Chuck Profito cprof...@cv-access.commailto:cprof...@cv-access.com wrote: You mean like open mesh with picos? From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Jerry Richardson Sent: Wednesday, October 13, 2010 4:03 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater I think the OpenWRT image will do that, but the stock firmware will not. - Jerry From: wireless-boun...@wispa.orgmailto:wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Wednesday, October 13, 2010 4:01 PM To: WISPA General List Subject: Re: [WISPA] UBNT repeater Yeah, not that either. I must have dreamt there was a way to use UBNT gear as a repeater/extender. Greg On Oct 12, 2010, at 10:23 PM, RickG wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen mailto:os10ru...@gmail.comos10ru...@gmail.commailto:os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/http://signup.wispa.org/ WISPA Wireless List: mailto:wireless@wispa.org wireless@wispa.orgmailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wirelesshttp://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/http://signup.wispa.org/ WISPA Wireless List: mailto:wireless@wispa.org wireless@wispa.orgmailto:wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wirelesshttp://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ http://lists.wispa.org/pipermail/wireless/ ATT1.c WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] UBNT repeater
I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
If it isn't doing WDS you need to a) plug into the station or b) plug an AP into that same station. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Oct 12, 2010 at 10:53 PM, RickG rgunder...@gmail.com wrote: Not looking good for this: http://ubnt.com/forum/showthread.php?t=24089highlight=repeater On Tue, Oct 12, 2010 at 9:53 PM, Greg Ihnen os10ru...@gmail.com wrote: I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] UBNT repeater
I use UBNT as a repeater by using a NanoM that has a secondary Ether and plug a second radio in it pointing to where I want to go and set it also as an AP, not WDS, with a different channel. Gets me around corners as in clumps of trees or whatever. Never had the SSID blank but I have set some SSID to ANY which will allow anyone to connect with zero security. Albert- (Formally Bob) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Greg Ihnen Sent: Tuesday, October 12, 2010 9:54 PM To: WISPA General List Subject: [WISPA] UBNT repeater I remember (I think) reading on this forum about how to use a UBNT radio as a repeater (not WDS) by leaving the SSID blank and choosing Station mode. Can anyone tell me how to do that? I'm near an open network (no encryption) and I have permission to extend it. Can't do WDS, the existing AP doesn't support it. Thanks! Greg WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
