Re: [wsjt-devel] Received RR73 Tx4 msg turning off our "Enable Tx"
>Even when calling with a different Tx tone frequency, as to not cause on-freq >QRM, as long as our Rx window is within 50 Hz of the station we want to call, >the disabling of "Tx Enable" occurs. Hi Rich, You are causing QRM as long as any of your transmitted FSK frequencies hits any of the FSK frequencies of the calling station. FT8 signal FSK frequencies are distributed over 50 Hz band and that’s why the Tx disabling is acting as intended to prevent unnecessary QRM. 73, Reino OH3mA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Received RR73 Tx4 msg turning off our "Enable Tx"
Presently on FT8, when we turn on our “Tx enable” button to call a station ending a QSO with another station, when we receive his Tx4 “ RR73” message, WSJT-X disables our “Enable Tx” button. Even when calling with a different Tx tone frequency, as to not cause on-freq QRM, as long as our Rx window is within 50 Hz of the station we want to call, the disabling of "Tx Enable" occurs. Is there any reason why this feature couldn't be eliminated, so we can proceed calling that station without having to re-enable the “Enable Tx” button when an "RR73" message is received? 73, Rich – K1HTV ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] WSJT-X v2.4.0 ** WSJT-X\status-file.txt
Win10. After running a few hours, I begin getting error messages from WSJT-X saying it can't find "C:\Users\\AppData\Local\Temp\WSJT-X". That folder is indeed missing. No surprise since it's in a "temp" folder. What is a surprise is that the missing folder should be under constant use and therefore, I would assume, protected as long as WSJT-X is running and re-established when WSJT-X is once again operational. If my assumption is correct, then why is it disappearing? Is there a way to either protect it, or move it to another folder? __ Dan - K4SHQ CFI/II ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
On Fri, Aug 6, 2021 at 8:31 AM jarmo via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Fri, 6 Aug 2021 08:06:36 -0500 > Richard Shaw via wsjt-devel > kirjoitti: > > > You can use my COPR test packages if using Fedora, or worst case > > download and unpack the RPM to get the source: > > > > https://copr.fedorainfracloud.org/coprs/hobbes1069/WSJT/build/2365258/ > > > > $ rpm2cpio .rpm | cpio -idmv > > > > Thanks, > > Richard > > KF5OIM > > Tnx Richard > > I wait, when I get normal Fedora update. I'm aware your > site and some times tested from there. > Now have time to calm down a bit and wait official updates > from Fedora. > I'm only building the RC's in COPR, once we reach full release I'll build for Fedora proper. Thanks, Richard ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
Fri, 6 Aug 2021 08:06:36 -0500 Richard Shaw via wsjt-devel kirjoitti: > You can use my COPR test packages if using Fedora, or worst case > download and unpack the RPM to get the source: > > https://copr.fedorainfracloud.org/coprs/hobbes1069/WSJT/build/2365258/ > > $ rpm2cpio .rpm | cpio -idmv > > Thanks, > Richard > KF5OIM Tnx Richard I wait, when I get normal Fedora update. I'm aware your site and some times tested from there. Now have time to calm down a bit and wait official updates from Fedora. Jarmo ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
Hello Kari, Friday, August 6, 2021, 2:56:55 PM, you wrote: > Nothing we can do about it, or perhaps you could change your ISP ;) oh yes, use the free 'Hoxx VPN Proxy' plugin, available for Firefox & Chrome to connect to https://www.physics.princeton.edu/pulsar/k1jt/index.html 73 de Wolfgang OE1MWW -- under construction: https://www.oe1mww.work/ ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
You can use my COPR test packages if using Fedora, or worst case download and unpack the RPM to get the source: https://copr.fedorainfracloud.org/coprs/hobbes1069/WSJT/build/2365258/ $ rpm2cpio .rpm | cpio -idmv Thanks, Richard KF5OIM ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
Yeah, known issue with their firewall blocking ranges that some algorythm has determined is a source of intrusion attempts. Use a VPN or Tor or equivalent. I suppose it would be easy enough to mirror to Amazon S3 or somewhere, but that's a rathole, and what we call "An Easy Task" 73, Willie N1JBJ > On Aug 6, 2021, at 8:25 AM, jarmo via wsjt-devel > wrote: > > Not a big deal, but is my ISP, IP-range 109.108.16.0 - 109.108.31.255 > somehow blocked from > https://www.physics.princeton.edu/pulsar/k1jt/index.html ? > If i try connect normally with any browser, never get site > opened. > But if I use TOR-browswr I get connected to site.. Any check? > > Jarmo > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Blocked?
Jarmo, princenton.edu blocks some ip-address ranges. Others have reported the same problenm, see https://wsjtx.groups.io/g/main/message/27219 for example. Nothing we can do about it, or perhaps you could change your ISP ;) 73's de Kari, oh2gqc On 6.8.2021 15.25, jarmo via wsjt-devel wrote: Not a big deal, but is my ISP, IP-range 109.108.16.0 - 109.108.31.255 somehow blocked from https://www.physics.princeton.edu/pulsar/k1jt/index.html ? If i try connect normally with any browser, never get site opened. But if I use TOR-browswr I get connected to site.. Any check? Jarmo ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Blocked?
Not a big deal, but is my ISP, IP-range 109.108.16.0 - 109.108.31.255 somehow blocked from https://www.physics.princeton.edu/pulsar/k1jt/index.html ? If i try connect normally with any browser, never get site opened. But if I use TOR-browswr I get connected to site.. Any check? Jarmo ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] RC5
Yes, Thanks to Joe and Team. Working fine here also. Bobby/N4AU -- n...@outlook.com n...@arrl.net ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X 2.5.0-rc4 and MAP65 3.0-rc5
On 06/08/2021 09:29, Claude Frantz via wsjt-devel wrote: On 8/5/21 3:40 PM, Joe Taylor via wsjt-devel wrote: WSJT-X 2.5.0-rc4 has a bug that prevents normal use of messages that include compound or nonstandard callsigns. For this reason we are making a public Release Candidate WSJT-X 2.5.0-rc5 after an unusually short interval. The RC5 release candidate is now ready for download by beta testers. On Windows the installation package also includes MAP65 3.0.0-rc5. Thanks Joe ! Up to now, the rc5 is not available on the git repo. Best wishes, Claude (DJ0OT) Hi Claude, apologies for the delay, Source Forge is now updated. 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] WSJT-X 2.5.0-rc4 and MAP65 3.0-rc5
On 8/5/21 3:40 PM, Joe Taylor via wsjt-devel wrote: WSJT-X 2.5.0-rc4 has a bug that prevents normal use of messages that include compound or nonstandard callsigns. For this reason we are making a public Release Candidate WSJT-X 2.5.0-rc5 after an unusually short interval. The RC5 release candidate is now ready for download by beta testers. On Windows the installation package also includes MAP65 3.0.0-rc5. Thanks Joe ! Up to now, the rc5 is not available on the git repo. Best wishes, Claude (DJ0OT) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
