Re: [XFree86] No Screen Found Error with Intel845 video card

[Dr Andrew C Aitchison]

On Mon, 17 Feb 2003, Ngan Tran wrote:

> I've successfully installed Redhat Linux 8.0 with dual mode in my machine .
 
> I'm using the video card Intel 845.

Your video card is too new to be supported in Red Hat 8.0.

I recommend that you get an XFree86 CVS snapshot or wait for
XFree86 v4.3 which should be available next month.

If you are desparate, you could try using the vesa driver instead
of the i810 driver.

-- 
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED]   http://www.dpmms.cam.ac.uk/~werdna

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

RE: [XFree86] xlib: howto detect x killed

[Dr Andrew C Aitchison]

On Mon, 17 Feb 2003, Nick Shrake wrote:

> Type: ps -ef
> 
> View the process then if you're root you can kill it if it's running (I
> doubt it!)

If you started it you can kill -HUP the Xserver even if you aren't root.
(Not actually killing it, just asking it to die, but it obeys).

-- 
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED]   http://www.dpmms.cam.ac.uk/~werdna

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Som keys not working on MS Natural Keybord if microsoft keyboard is specified in XF86Config-4

[Mikael Andersson]

Upon upgrade to 4.1.99.4 my <>| key (.se layout keycode 94) stopped working.
Had to change to  Option  "XkbModel" "pc102" to get it to work
/regargs Mikael Andersson
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] (no subject)

[Paul N Cashman]

(See attached file: XFree86.0.log)


XFree86.0.log
Description: Binary data

[XFree86] Free Video of the Week

[FUN]

Free Movie of the Week

http://www.fun-www.com 













Remove me from List:
http://www.fun-www.com/newsletter.php

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Error - Unable to find config file

[Amit_Thawani]

Hi,

We are trying to use version 4.2.0 of XFree86 on RedHat Linux 7.2 kernel
version 2.4.17.
The build goes fine.

When trying to execute startx/xinit, the following error is thrown on
screen.

"on 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.17 i586 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 14 00:36:18 2003
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found"

What can be the possible cause of this error.

Thanks and Regards,
Amit Thawani
** 
This email (including any attachments) is intended for the sole use of the
intended recipient/s and may contain material that is CONFIDENTIAL AND
PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or
distribution or forwarding of any or all of the contents in this message is
STRICTLY PROHIBITED. If you are not the intended recipient, please contact
the sender by email and delete all copies; your cooperation in this regard
is appreciated.
**
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] ATI Radeon 9700 Pro

[Alastair G. Hogge]

On Monday, 17 February 2003 21:30, Nigel Taylor wrote:
> Hello all
Hello,

> Could some tell me when the ATI Radeon 9700 Pro will be support in
> XFree86?
Well 4.3 will ship with XFree86 2D drivers. As for 3D, I don't think so.
You could try hassling ATI for some FreeBSD drivers...I am constantly when I 
have time.

> or if there is any drivers for Freebsd so i could use it please.
I'm using CVS (X-4.2.99.901) under FreeBSD and my 9700 works okie
...well alittle screen flicker

> Thank you
Hope I was some help

-Al
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] [XFree86(TM) Bug Report] XFree86 ver.4.1.0-25 // Fatal server error: Caught signal 11. Server aborting

[Kazuki Tanaka]

Regarding: XFree86 ver.4.1.0-25 //  Fatal server error: Caught signal 11.  Server 
aborting
Email: [EMAIL PROTECTED]

XFree86 Version: XFree86 ver.4.1.0-25

OS: Red Hat Linux 7.2

Area: Xserver

Server: XFree86 (The XFree86 4.x server)

Video Card:


Matrox // Milennium G450 DVI  , RAMDAC 360MHz

Description:


I use a Linux-PC(Red Hat Linux 7.2) for a X-terminal of a UNIX server(hp-ux11i).
The Linux-PC is connected to the UNIX server like this.

  DISPLAY===Linux-PC --- HUB  UNIX server
 RGB LAN  LAN

I can see a UNIX screen at the display by changing configurations.

I set screensavers and DPMS off.
But the display suddenly becomes black when we use Linux-PC about 50 minutes.
This is one ploblem.

And ,
if I move the mouse soon , UNIX screen recovers normaly.
But if I don't move the mouse or I don't push any key on the key board about one hour ,
UNIX screen can't recover normaly.
When I move the mouse , UNIX screen recovers unperfectly , and the screen changes to
Linux login state.
This is a plobrem.

I show FULL server output.

XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-25) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.9-31smp i686 [ELF] 
Build Host: stripples.devel.redhat.com
 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 18 09:41:43 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Anaconda Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Matrox Millennium G450"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) XKB: rules: "xfree86"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) FontPath set to "tcp/L_CONT2:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 133, Mem @ 0xf600/25, 0xf480/14, 
0xf400/23
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.0.2
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w

[XFree86] Thinkpad A31 and Radeon Mobility 7500

[Dominik Szczerba]

Hi,

I have a problem on my IBM TP A31 running debian/unstable 2.4.20. Most 
(but not all!!) OpenGL commands dont work. Just "black screen" effect. 
GL_LINES and GL_POINTS work for example, but GL_TRIANGLES and more 
complex commands won't work.

Is it something to do with libGL* stuff? So will newer XFree version help?

What's the stage of development for Radeon 7500 in current CVS version?

Thanks a lot,
Dominik

--
--
Dominik Szczerba, Dr.
CO-ME, D-ITET, ETZ F85
ETH, Gloriastr. 35
CH-8092 Zurich
http://www.vision.ee.ethz.ch/~domi
--
ii swear i never use vi^[:wqZZ
--

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] plantage du xwindow

[sylvain]

J'ai trouvé un bug.
Quand je passe en mode texte (control+alt+F1 par exemple), Xfree86 plante 
après quelques secondes. Et je ne peu plus redémarrer startx.

Help!

Sylvain

([EMAIL PROTECTED])
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] (no subject)

[Jesper Gertz]

Med Venlig Hilsen
SIEMENS Technology Services Nord A/S


Jesper Gertz
Telefon:99 36 40 00
Direkte:99 36 40 24
Mobil:  20 22 10 78
Fax:99 36 40 40
mailto:[EMAIL PROTECTED]
Web:www.tp-as.dk

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] plantage du xwindow

[Peter Finderup Lund]

On Tue, 18 Feb 2003, sylvain wrote:

> J'ai trouvé un bug.
> Quand je passe en mode texte (control+alt+F1 par exemple), Xfree86 plante
> après quelques secondes. Et je ne peu plus redémarrer startx.

"I have found a bug.
When I pass through a text mode (ctrl+alt+F1, for example), XFree86
*plante* after some seconds.  And I can't restart(?) startx
any longer."

My severely limited French-Danish dictionary is no help with plante.
Unless you are talking about planting and gardening.  I suppose it's argot
for crashing.

Please write in English the next time.  Why should it be easier for others
to read your French than for you to write English?  The onus is on you to
make yourself understandable.

I could mutter something here about typical French arrogance which we see
plenty of in the EU but I won't.

-Peter

"Of course, I'm not unbiased, but in my humble opinion, I've
 gotten close to something that I can be really proud of."
 -- Knuth on The Art of Computer Programming.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Minimal build source required?

[Matthias Nispel]

Hi out there,


I'd like to get some information what's the minimum of source I need to
build a working Xserver. I looked around on the X website and may have
missed something. So far, I've downloaded the xc/programs/Xserver/ tree
from CVS repository.

Want to test some modification I made to the chips driver.
If successful, I'll submit a patch.
On the target machine I now run Debian woody. It's X environment is
pretty old (4.1.x).

Just give me apointer to the information I might need, please.

Thanks in Advance,
Matthias


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] xlib: howto detect x killed

[bitlov]

No the problem is that when my program try to draw something in the window
of a stopped/killed xserver, it crashs. It is impossible to test if the
xserver is alive before any drawing primitive. I just would like to get an
event that the communication with the xserver is broken instead of a big
crash while I send a request to the xserver.
Bitlov


> Type: ps -ef
>
> View the process then if you're root you can kill it if it's running (I
> doubt it!)
>
> -Original Message-
> How to detect that the X server has been killed or stopped ?
>
> My program that use a window with the override_redirect flag set crashs
> when
> sending x request to a dead X server. I have tried to detect dead X with
> XSetErrorHandler() and XSetIOErrorHandler() but the handlers are never
> called.
> Please help.
> Thanks
> Bitlov



_
Envie de discuter en "live" avec vos amis ? Télécharger MSN Messenger
http://www.ifrance.com/_reloc/m la 1ère messagerie instantanée de France

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Solution please

[Subramanian. K]

In my machine, i can start the X server only as root. 

I have attached the full logs. 

What to do ?

-- 
mani Feb 18


XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] 
Build Host: stripples.devel.redhat.com
 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 18 16:26:02 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "DELL 828FI"
(**) |   |-->Device "ATI Mach64 3D Rage IIC"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) xf86ReadBIOS: Failed to open /dev/mem (Operation not permitted)

Fatal server error:
xf86OpenConsole: Server must be suid root


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]

Re: [XFree86] Minimal build source required?

[Dr Andrew C Aitchison]

On Tue, 18 Feb 2003, Matthias Nispel wrote:

> I'd like to get some information what's the minimum of source I need to
> build a working Xserver. I looked around on the X website and may have
> missed something. So far, I've downloaded the xc/programs/Xserver/ tree
> from CVS repository.

You need the whole of the xc tree.
I get the cvs "packages":
cvs-base
cvs-src
xc-all
from cvsup.xfree86.org
but xc-all is probably sufficient

-- 
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED]   http://www.dpmms.cam.ac.uk/~werdna

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Solution please

[Dr Andrew C Aitchison]

On Tue, 18 Feb 2003, Subramanian. K wrote:

 
> In my machine, i can start the X server only as root. 
 
> Fatal server error:
> xf86OpenConsole: Server must be suid root

One solution would be to type
chmod 4711 /usr/X11R6/bin/XFree86
but that is a really dangerous command to use.
Please understand it and think why the X server binary lost the
"suid root" bit.
There are good arguments saying that it shouldn't be necessary to
fix it this way.

-- 
Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge
[EMAIL PROTECTED]   http://www.dpmms.cam.ac.uk/~werdna


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] radeon 9500 Xvideo crash w/SwCursor, 4.2.99.901

[Michel Dänzer]

On Die, 2003-02-18 at 05:03, Charles R. Anderson wrote:
> On Mon, Feb 17, 2003 at 09:52:53PM +0100, Michel Dänzer wrote:
> michel> Indeed, I suspect it's the xf86ForceHWCursor() call.
> michel> Can you try this patch? It didn't help for the same problem with the DRI
> michel> for someone else, but that was without the radeon_driver.c hunk; let's
> michel> hope that makes a difference.
> 
> Thanks!
> 
> It does indeed eliminate the crash. 

Great, thanks for testing. Have you also tried a DRI client? Even
glxinfo crashed the server for someone else.


> However, now I notice some (very minor) weirdness with Xv...namely, a 
> black block is left under the SwCursor when switching from a window to 
> fullscreen mode in mplayer...
> The black block remains there while the video plays underneath and
> around it.

Probably the cursor blending changes the color key around the cursor so
the video isn't visible there.

> HwCursor, once again, has no issues whatsoever.

That's why the driver wants to force HW cursor for Xv and DRI windows.
:)


-- 
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member   /  CS student, Free Software enthusiast

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500

[Michel Dänzer]

On Die, 2003-02-18 at 10:55, Dominik Szczerba wrote:
> 
> I have a problem on my IBM TP A31 running debian/unstable 2.4.20. Most 
> (but not all!!) OpenGL commands dont work. Just "black screen" effect. 
> GL_LINES and GL_POINTS work for example, but GL_TRIANGLES and more 
> complex commands won't work.
> 
> Is it something to do with libGL* stuff? So will newer XFree version help?

Yes, this is an xlibmesa3-gl problem (which has been reported several
times to the Debian BTS), the code is probably too old to build
correctly with the sid toolchain.

http://penguinppc.org/~daniels/README or
http://dri.sourceforge.net/snapshots/README.Debian should work.


> What's the stage of development for Radeon 7500 in current CVS version?

It's very well supported.


-- 
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member   /  CS student, Free Software enthusiast

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Minimal build source required?

[Michel Dänzer]

On Die, 2003-02-18 at 11:29, Matthias Nispel wrote:
> 
> I'd like to get some information what's the minimum of source I need to
> build a working Xserver.

The DRI CVS tree is cut down to only build the X server, libGL and the
DRI drivers. You could start from there.


-- 
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member   /  CS student, Free Software enthusiast

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Rental Car Hot Deals from RentalCars.com

[[EMAIL PROTECTED]]

Rental Car Hot Deals from http://www.RentalCars.com

Reserve today for Spring Vacation and Easter!  FREE Upgrades!

**Alamo: Sweet Deal on Compact Cars Nationwide 'till April 9!

http://alamo.com/hotdeals/template.asp?msg=affil_rentalcarscom_og

*Thrifty: Save 10% off Thrifty's PT Cruisers, Vans, SUVS & Pick-Up Trucks!

http://www.rentalcars.com/Untitled/Thrifty_/10percent.shtml

**Budget: FREE Upgrade through 7/2/03!

http://www.budget.com/partners/rentalcars.html

***Alamo: Super SUV Offer! Only $39/day $219/wk!

http://alamo.com/hotdeals/template.asp?msg=rentalcars_1w_offer


**Dollar: Minivan Offer Now thru 4/15/03! Only $199/week!
 
http://www.dollar.com/promotions/dol39_promo.asp?iatanbr=10003759


*Alamo: Up to 30% off SUV SKI rentals thru 4/30/03-free ski racks!

http://tinyurl.com/5txs

*Avis: FREE Upgrade through 12/31/2003!

http://www.avis.com/cgi-bin/go?LID=991&ADID=2557

*Budget: Additional $15 off your 4 day or longer rental!

http://www.budget.com/partners/rentalcars2002.html


*Fox: California & Phoenix! Rates up to 40% lower than most major
agencies!
http://www.foxrentacar.com/mini-sites/rentalcars/index.html

*Hertz: Get a FREE Upgrade through 2003!

http://www.rentalcars.com/Untitled/Hertz/upgrade.shtml


*National: New Low Weekly Rates starting at only $139/day!

http://tinyurl.com/5txv

*SIXT/DOLLAR: Has terrific rates in Ireland-at 13 Convenient Locations!
http://rentalcars.com/Untitled/Sixt/sixt.htm

**Priceline: Save up to 20%! BIG name brands! Go Ahead-Make an Offer!

http://tinyurl.com/5txl

***Thrifty: FREE car rental Upgrade through 2003!

http://www.rentalcars.com/Untitled/Thrifty_/thrifty_.shtml


Check out all Rental Car Hot Deals- updated daily at
http://www.RentalCars.com

Rates as of February 18, 2003 and are subject to availability.
Please confirm your reservation.

Thank you for shopping RentalCars.com. Have a great trip!

---
You are currently subscribed to rentalcars-specials as: [EMAIL PROTECTED]
To unsubscribe send a blank email to 
[EMAIL PROTECTED]
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Bug report 4.2.9.901

[Guillaume Burel]

X crashes at startup: the screen remains black, and the keyboard doesn't
answer any longer, so I must reboot my computer.

Guillaume Burel

On 17 Feb 2003, Michel Dänzer wrote:

>
> On Son, 2003-02-16 at 16:45, Guillaume Burel wrote:
> >
> > VERSION:
> >
> > 4.2.99.901
> >
> > VIDEO DRIVER:
> >
> > radeon
>
> [...]
>
> >  Problems with dri and glx: I downloaded and installed the latest
> > drivers of gatos, but if I write in XF86Config-4 the following lines:
> > Load  "glx"
> > Load  "dri"
> > X crashes (but I had the same problem with version 4.2.1).
>
> Crashes how (lockup? server crash? ...) and when (on server startup?
> when doing something in particular? ...)?
>
>
> --
> Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
> XFree86 and DRI project member   /  CS student, Free Software enthusiast
>
>

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] [XFree86(TM) Bug Report] XFree crashes when switching consoles with I810 driver

[Idan Sofer]

Regarding: XFree crashes when switching consoles with I810 driver
Email: [EMAIL PROTECTED]

XFree86 Version: 4.2.1

OS: Gentoo GNU/Linux 1.4rc, Kernel 2.4.20

Area: XServer

Server: XFree86 (The XFree86 4.x server)

Video Card:

Intergrated video chip of Intel 815e chipset(82815 CGC Rev 2 according to /proc/pci)

Description:

The XServer works smoothly when VideoRam is set to 4096 or less.

Setting to 8192 or larger variable can result in X11 crash when the two following 
conditions are fulfuilled:
A) User switches to another console(Ctrl-Alt-Fx)
B) An X11 client attempts to update display(such as rendering a web page), the 
following error is omitted:

XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20 i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 18 16:04:46 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "I810"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "il"
(**) XKB: layout: "il"
(**) Option "XkbOptions" "grp:switch,grp:shift_toggle,grp_led:scroll"
(**) XKB: options: "grp:switch,grp:shift_toggle,grp_led:scroll"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/hebrew" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/ttf" does not exist.
Entry deleted from font path.
(**) FontPath set to 
"/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card , rev 02 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,1132 card 8086,4541 rev 02 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card , rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card , rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 8086,4541 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2443 card 8086,4541 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 8086,4541 rev 02 class 0c,03,00 hdr 00
(II) PCI: 01:08:0: chip 8086,2449 card 8086,3013 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1  0x - 0x (0x1) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1  0x - 0x (0x0) MX[B]
(II) Bus 0 prefetchabl

Re: [XFree86] Error - Unable to find config file

[Lionel Lecoq]

since you are using RH 7.2 Xconfigurator should work for you
Lionel
--- Amit_Thawani <[EMAIL PROTECTED]> wrote:
> Hi,
> 
> We are trying to use version 4.2.0 of XFree86 on RedHat Linux 7.2 kernel
> version 2.4.17.
> The build goes fine.
> 
> When trying to execute startx/xinit, the following error is thrown on
> screen.
> 
> "on 4.2.0 / X Window System
> (protocol Version 11, revision 0, vendor release 6600)
> Release Date: 18 January 2002
> If the server is older than 6-12 months, or if your card is
> newer than the above date, look for a newer version before
> reporting problems.  (See http://www.XFree86.Org/)
> Build Operating System: Linux 2.4.17 i586 [ELF]
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
>  (++) from command line, (!!) notice, (II) informational,
>  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/XFree86.0.log", Time: Fri Feb 14 00:36:18 2003
> (EE) Unable to locate/open config file
> (EE) Error from xf86HandleConfigFile()
> 
> Fatal server error:
> no screens found"
> 
> What can be the possible cause of this error.
> 
> Thanks and Regards,
> Amit Thawani
> ** 
> This email (including any attachments) is intended for the sole use of the
> intended recipient/s and may contain material that is CONFIDENTIAL AND
> PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or
> distribution or forwarding of any or all of the contents in this message is
> STRICTLY PROHIBITED. If you are not the intended recipient, please contact
> the sender by email and delete all copies; your cooperation in this regard
> is appreciated.
> **
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86


__
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500

[Dominik Szczerba]

Hi,

Thanks a lot for hints. Here is the report:

1) I installed xserver-xfree86-dri-trunk and xlibmesa-gl1-dri-trunk
from http://people.debian.org/~daenzer/dri-trunk-sid/. I didnt find the
mentioned xlibmesa3-dri-trunk.

2) I installed drm-trunk-module-src package, but havent built it - I 
have no idea about it nor about kernel-package...

OK, I rebooted and... new login window

I CANNOT LOGIN EVEN AS ROOT

Switched to console, logged normally (uf, worked) and did startx. So 
I will get it fixed somehow myself, no problem.

glxgears reported first over 1000 fps but also:

libGL error: InitDriver failed

and screwing up a bit my machine (display is slooow, windows are messed
up a bit).

Starting it the second time reported 100 fps only consistent with 
other GL apps, which also are very slow The error is there, apps 
are working, but very slow.

What is wrong? Is it is this drm-trunk-module-src that I didnt built? If 
yes, then please, one word how to build it...

thank you!
Dominik


Michel Dänzer wrote:
On Die, 2003-02-18 at 10:55, Dominik Szczerba wrote:


I have a problem on my IBM TP A31 running debian/unstable 2.4.20. Most 
(but not all!!) OpenGL commands dont work. Just "black screen" effect. 
GL_LINES and GL_POINTS work for example, but GL_TRIANGLES and more 
complex commands won't work.

Is it something to do with libGL* stuff? So will newer XFree version help?


Yes, this is an xlibmesa3-gl problem (which has been reported several
times to the Debian BTS), the code is probably too old to build
correctly with the sid toolchain.

http://penguinppc.org/~daniels/README or
http://dri.sourceforge.net/snapshots/README.Debian should work.




What's the stage of development for Radeon 7500 in current CVS version?



It's very well supported.




___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Redhat vs plaympeg error message

[Graham Campbell]

I upgraded to Redhat 8.0 and plaympeg stopped working. It gives the
error:
--
[gc@sirius ~/tmp]$ plaympeg vid02.mpg
vid02.mpg: MPEG video stream
Video 160x120 resolution
Size: 238837
Total time: 8.00
X Error of failed request:  BadAlloc (insufficient resources for
operation)
  Major opcode of failed request:  141 (XVideo)
  Minor opcode of failed request:  19 ()
  Serial number of failed request:  21
  Current serial number in output stream:  22
--
Can anyone give me a quick explanation of what is going wrong?

But more importantly can you give me a pointer to how to understand
these error messages?
-- 
Graham Campbell <[EMAIL PROTECTED]>

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] plantage du xwindow

[David Bateman]

According to Peter Finderup Lund <[EMAIL PROTECTED]> (on 02/18/03):
> On Tue, 18 Feb 2003, sylvain wrote:
> 
> > J'ai trouvé un bug.
> > Quand je passe en mode texte (control+alt+F1 par exemple), Xfree86 plante
> > après quelques secondes. Et je ne peu plus redémarrer startx.
> 
> "I have found a bug.
> When I pass through a text mode (ctrl+alt+F1, for example), XFree86
> *plante* after some seconds.  And I can't restart(?) startx
> any longer."

C'est l'argo. :-)

It's slang, plante = "to crash" in this context

D.

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] unsubscribe

[Douglas Gray]

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] radeon 9500 Xvideo crash w/SwCursor, 4.2.99.901

[Charles R. Anderson]

On Tue, Feb 18, 2003 at 01:03:21PM +0100, Michel Dänzer wrote:
michel> Great, thanks for testing. Have you also tried a DRI client? Even
michel> glxinfo crashed the server for someone else.

glxinfo doesn't crash the server, however, I don't believe DRI is
supported on R300 chipsets yet:

Xlib:  extension "XFree86-DRI" missing on display ":0.0".

so I'm stuck at 2D for the time being.

-- 
Charles R. Anderson <[EMAIL PROTECTED]> / http://angus.ind.wpi.edu/~cra/
PGP Key ID: 49BB5886
Fingerprint: EBA3 A106 7C93 FA07 8E15  3AC2 C367 A0F9 49BB 5886

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] unsubscribe

[Chidambaram Ramachandran]

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500

[Dominik Szczerba]

Hi,

I just discovered that on knoppix debian-on-cd all works fine and very
fast (glxgears give 1.2kfps!!!):


knoppix@ttyp1[knoppix]$ XFree86 -version

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

***

XFree86 Version 4.2.1.1 (Debian 4.2.1-4 20021123003806
[EMAIL PROTECTED]) / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF]
Module Loader present

***

So what's going on here, they use even older version that I HAD (I used
your patches)...? So maybe the problem can be fixed more elegantly
without the mesa patches?  What am I doing wrong? Now, after the patches
I get very slow results and the windows system slows down...

regards,
Dominik


> Yes, this is an xlibmesa3-gl problem (which has been reported several
> times to the Debian BTS), the code is probably too old to build
> correctly with the sid toolchain.
>
> http://penguinppc.org/~daniels/README or
> http://dri.sourceforge.net/snapshots/README.Debian should work.
>
>
> > What's the stage of development for Radeon 7500 in current CVS version?
>
> It's very well supported.
>
>
>
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] plantage du xwindow

[Peter Finderup Lund]

On Tue, 18 Feb 2003, David Bateman wrote:

> According to Peter Finderup Lund <[EMAIL PROTECTED]> (on 02/18/03):
> > On Tue, 18 Feb 2003, sylvain wrote:
> >
> > > J'ai trouvé un bug.
> > > Quand je passe en mode texte (control+alt+F1 par exemple), Xfree86 plante
> > > après quelques secondes. Et je ne peu plus redémarrer startx.
> >
> > "I have found a bug.
> > When I pass through a text mode (ctrl+alt+F1, for example), XFree86
> > *plante* after some seconds.  And I can't restart(?) startx
> > any longer."
>
> C'est l'argo. :-)
>
> It's slang, plante = "to crash" in this context

Das war auch was ich geglaubt hatte.  Ich war aber nicht ganz sicher.

(just to ram down the point to Sylvain that using national languages in an
international forum only works for UK/EI/CA/US/NZ/AU and to a certain
extent South Africa and India)

-Peter

PS:  It's argot ;)

"Of course, I'm not unbiased, but in my humble opinion, I've
 gotten close to something that I can be really proud of."
 -- Knuth on The Art of Computer Programming.
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] XFree86 4.2.99 hangs Solaris 9 on Ultra 10 upon quitting

[Dan]

Hello,

I have XFree86 4.2.99-901, compiled with GCC 3.2.1, running on
Solaris 9 12/02 on an Ultra 10 using the built-in PGX24 video,
which is based on ATI's Mach64.  It build, starts, and runs
fine, however upon quitting X the entire machine hangs.  No
keyboard, no mouse, no Stop-A, and no response to pings.

Since the entire machine is freezing, I'm making an assumption
that it might be due to the kernel-mode aperture module.  That
was also built with GCC 3.2.1 with the -m64 flag.

There is one line in /var/log/XFree86.0.log that stands out
(mostly because it beeps):

(WW) INVALID IO ALLOCATION b: 0xff00 e: 0x
correcting

Could that be related?

Here are /var/log/XFree86.0.log and /etc/X11/XF86Config.

Thanks for any suggestions..

--- [ XFree86.0.log ] ---

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED]  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.2.99.901 (4.3.0 RC 1)
Release Date: 16 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: SunOS 5.9 Generic_112233-03 sun4u 
Build Date: 18 February 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 18 11:10:59 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on solaris
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.99.901, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.99.901, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Sabre or Hummingbird PCI host bridge found ("SUNW,sabre")
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 100:00:0: chip 108e,a000 card , rev 00 class 06,00,00 hdr 00
(II) PCI: 100:01:0: chip 108e,5000 card , rev 13 class 06,04,00 hdr 81
(II) PCI: 100:01:1: chip 108e,5000 card , rev 13 class 06,04,00 hdr 81
(II) PCI: 101:01:0: chip 108e,1000 card , rev 01 class 06,80,00 hdr 80
(II) PCI: 101:01:1: chip 108e,1001 card , rev 01 class 02,00,00 hdr 80
(II) PCI: 101:02:0: chip 1002,4750 card , rev 5c class 03,00,00 hdr 00
(II) PCI: 101:03:0: chip 1095,0646 card 1095,0646 rev 03 class 01,01,8f hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0@1: bridge is at (0@1:0:0), (0@1,0@1,2@1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0@1 I/O range:
[0] -1  1   0x - 0x00ff (0x100) IX[B]
(II) Bus 0@1 non-prefetchable memory range:
[0] -1  1   0x - 0x (0x0) MX[B]
(II) Bus 0@1 prefetchable memory range:
[0] -1  1   0x - 0x (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2@1: bridge is at (0@1:1:0), (0@1,2@1,255@1), BCTRL: 0x002b (VGA_EN is set)
(II) Bus 2@1 I/O range:
[0] -1  1   0x - 0x001f (0x20) IX[B]
[1] -1  1   0x0020 - 0x003f (0x20) IX[B]
[2] -1  1   0x0040 - 0x005f (0x20) IX[B]
[3] -1  1   0x0060 - 0x007f (0x20) IX[B]
[4] -1  1   0x0080 - 0x009f (0x20) IX[B]
[5] -1  1   0x00a0 - 0x00bf (0x20) IX[B]
(II) Bus 2@1 non-prefetchable memory range:
[0] -1  1   0x - 0x1fff (0x2000) MX[B]
[1] -1  1   0x2000 - 0x3fff (0x2000) MX[B]
[2] -1  1   0x4000 - 0x5fff (0x2000) MX[B]
[3] -1  1   0x6000 - 0x7fff (0x200

Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500

[Dominik Szczerba]

Hi,

The story goes on:

I very much apologize for my ignorance on kernel-package stuff. I just
compiled the modules myself, and brute-force copied radeon.o into my
/lib/modules. IT WORKS! No more errors, no unstabilities (well,
still I cant login, I have to kill login window, login via console and
then startx).

However, I get 20% less acceleration than with (older?) knoppix XFree...
glxgears give exactly 1kfps (0.1 before), while knoppix reports 1.2kfps.
It is not disaster, but I am just ambitious: why did it all happen, and
how/if could it have been avoided with normal sid xfree... and still,
why is knoppix faster?

thanks a lot for getting me on the right track
Dominik

On Tue, 18 Feb 2003, Dominik Szczerba wrote:

> Date: Tue, 18 Feb 2003 16:41:32 +0100
> From: Dominik Szczerba <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED], [EMAIL PROTECTED]
> Subject: Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500
>
> Hi,
>
> Thanks a lot for hints. Here is the report:
>
> 1) I installed xserver-xfree86-dri-trunk and xlibmesa-gl1-dri-trunk
> from http://people.debian.org/~daenzer/dri-trunk-sid/. I didnt find the
> mentioned xlibmesa3-dri-trunk.
>
> 2) I installed drm-trunk-module-src package, but havent built it - I
> have no idea about it nor about kernel-package...
>
> OK, I rebooted and... new login window
>
> I CANNOT LOGIN EVEN AS ROOT
>
> Switched to console, logged normally (uf, worked) and did startx. So
> I will get it fixed somehow myself, no problem.
>
> glxgears reported first over 1000 fps but also:
>
> libGL error: InitDriver failed
>
> and screwing up a bit my machine (display is slooow, windows are messed
> up a bit).
>
> Starting it the second time reported 100 fps only consistent with
> other GL apps, which also are very slow The error is there, apps
> are working, but very slow.
>
> What is wrong? Is it is this drm-trunk-module-src that I didnt built? If
> yes, then please, one word how to build it...
>
> thank you!
> Dominik
>
>
> Michel Dänzer wrote:
> > On Die, 2003-02-18 at 10:55, Dominik Szczerba wrote:
> >
> >>I have a problem on my IBM TP A31 running debian/unstable 2.4.20. Most
> >>(but not all!!) OpenGL commands dont work. Just "black screen" effect.
> >>GL_LINES and GL_POINTS work for example, but GL_TRIANGLES and more
> >>complex commands won't work.
> >>
> >>Is it something to do with libGL* stuff? So will newer XFree version help?
> >
> >
> > Yes, this is an xlibmesa3-gl problem (which has been reported several
> > times to the Debian BTS), the code is probably too old to build
> > correctly with the sid toolchain.
> >
> > http://penguinppc.org/~daniels/README or
> > http://dri.sourceforge.net/snapshots/README.Debian should work.
> >
> >
> >
> >>What's the stage of development for Radeon 7500 in current CVS version?
> >
> >
> > It's very well supported.
> >
> >
>
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>

-- 
--
Dominik Szczerba, Dr.
CO-ME, D-ITET, ETZ F85
ETH, Gloriastr. 35
CH-8092 Zurich
http://www.vision.ee.ethz.ch/~domi
--
ii swear i never use vi^[:wqZZ
--
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Redhat vs plaympeg error message

[Mark Vojkovich]

  Minor opcode 19 is XvShmPutImage.  BadAlloc on that request usually
means there's not enough video ram for the overlay buffers.  Maybe if
you don't use the DRI (which, if I recall correctly, steals video ram
for 3D) you will have enough memory?


Mark.


On Tue, 18 Feb 2003, Graham Campbell wrote:

> I upgraded to Redhat 8.0 and plaympeg stopped working. It gives the
> error:
> --
> [gc@sirius ~/tmp]$ plaympeg vid02.mpg
> vid02.mpg: MPEG video stream
> Video 160x120 resolution
> Size: 238837
> Total time: 8.00
> X Error of failed request:  BadAlloc (insufficient resources for
> operation)
>   Major opcode of failed request:  141 (XVideo)
>   Minor opcode of failed request:  19 ()
>   Serial number of failed request:  21
>   Current serial number in output stream:  22
> --
> Can anyone give me a quick explanation of what is going wrong?
> 
> But more importantly can you give me a pointer to how to understand
> these error messages?
> -- 
> Graham Campbell <[EMAIL PROTECTED]>
> 
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
> 

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] problems with APM and OpenGL

[Dominik Szczerba]

Hi,

I am using debian/unstable on IBM TH A31 ATI Mobility Radeon 7500, and
have installed the latest xfree86 from  the unofficial debian packages,
as advised.

1) APM doesnt work correctly anymore hanging my machine after sleep. It
*WAS* working before, compiled in the kernel (apm module wouldnt work).

2) OpenGL finally work, but still not 100%. I would say implementation
improved from 10% to 90%. What I noticed still doesnt work is the point
size (GL_POINT_SIZE, if I recall).

any ideas would be appreciated,
bye
Dominik

-- 
--
Dominik Szczerba, Dr.
CO-ME, D-ITET, ETZ F85
ETH, Gloriastr. 35
CH-8092 Zurich
http://www.vision.ee.ethz.ch/~domi
--
ii swear i never use vi^[:wqZZ
--
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] overdrive problem w/XF86 4.2.0, intel 845G, philips 180P2 LCD

[reece]

I'm having trouble getting a new flat panel display to work with
linux and I'd appreciate tips (or at least moral support).

The setup:
- RedHat 8.0, XFree86 4.2.0, kernel 2.4.20
- display configured with RedHat's redhat-config-xfree86
- video card: Intel 845 (Compaq Evo D510 onboard)
  /proc/pci says:
 VGA compatible controller: Intel Corp. 82845G/GL
  [Brookdale-G] Chipset Integrated Graphics Device (rev 1).
  identified as Intel 845 by redhat-config-xfree86, which selected the
  i810 driver
- monitor: Philips 180P2 TFT LCD
  redhat-config-xfree86 DDC probe incorrectly identifies this as a 180B
  and suggests HSync 30-82 (kHz), and VSync 56-76 (Hz).  (Compare with
  monitor's error, below, requesting 1280x1024@60Hz).

The problem:
  The monitor complains "This is 85HZ overdrive, change computer display
input to 1280x1024@60Hz".  Windows was able to drive the monitor at those
dimensions & refresh, but I can't make linux do so.  

I've tried:
  I've tried many combinations of H & V sync, resolution, and depth
(restarting X each time).  I get the same message every time, as though my
changes weren't doing anything.  I've changed settings via
redhat-config-xfree86 and by editing XF86Config directly.  I suspect I
need a custom modeline and tried to cobble a few together, but that's
really out of my league.

I've also browsed xfree86.org to for i810 info.  The 4.2.99.903 changelog
implies that the i810 driver previously doesn't recognize the 845G.  Any
ideas whether this is really my problem?

Thanks for any suggestions.

-Reece

-- 
Reece Hart, http://www.in-machina.com/~reece/, GPG:0x25EC91A0 0xD178AAF9

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Can't open X window

[jgao]

Dear Sir,

I am using RedHat. I did update the system with Redhat online service, and I
could not use X window after updating. The error message I got is

 "Fatal server error:
could not open default font 'fixed'
.."
The /var/log/XFree86.0.log file is attached here.(See attached file:
XFree86.0.log)

Would you please help me to check it?
Thanks a lot!

- Jinghong (Julia) Gao



XFree86.0.log
Description: Binary data

Re: [XFree86] Can't open X window

[Jason Cooper]

Julia,

Find the font paths in your XF86Config file and double check those
against what is on your system.  

Cooper.


[EMAIL PROTECTED] ([EMAIL PROTECTED]) wrote:
> 
>  "Fatal server error:
> could not open default font 'fixed'
> .."
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Cool free dating service

[sponge_bob]

Title: A little Valentine surprise!








		Hi, 
Still lonely?  Check out,
			
			 
 			
 		
 		 http://www.ewao.com/
   			
   		
   		
   			REAL FREE dating service. Why wasting time with so-called "Free" dating website. Check our unique, interesting and patented features 

			
		
		

   Privacy 
Dating is a private matter. In Ewao.com YOU can choose who can see your Private Personals. Of course, if you want everybody to know your profile, no problem, Ewoa.com is the hottest spot in Internet.  
 
  Easy to use
 Ewao.com is simple and powerful. 
Ewao.com is very easy and friendly; you can become a member and start communicating in less than a minute. 
 
 
International  
You can communicate to the whole world; just write in your preferred language. 

We take dating seriously

We know what you want and we have the features you need. We have friendly staff and the best customer service. 
Ewao.com is the answer. 


Enjoy! 

The Staff




If this email is sent to you by mistake, we are sorry about that.
Please send a message to [EMAIL PROTECTED] and we will remove this eamil address from the list.
 

[XFree86] Command Not Found when running Startx

[Kevin B. Payne]

Debian GNU Storm Linux (2.2.16) on an
AMD 300 CPU + IBM compatible system.
 
During the process of fighting to remove the old 
Xserver 3.3.? I accidently lost the links or something that is necessary to 
allow my system to see where the Xserver's programs are. I can startx by hand by 
going to /usr/X11R6/bin and typing ./startx but then the program complians that 
xauth and xinit which are both found in the same folder aren't 
there...
 IE: It also says, "command not found" for 
those files and won't even make an attempt at starting.
 
I have seen the Xserver running by using ./XFree86 
-xf86config /etc/X11/XF86Config
But even then it doesn't give me access to The 
Window Manager ( twm ) which is also in the same folder...
 
How can I tell Linux that these files are 
executable and add them to the list of available files that can be run from 
prompt?
Right now I cannot see startx from anywhere on the 
system without typing the full path
 
Thanks in advance.
 
Kevin88
 
 

Re: [XFree86] Can't open X window

[Oisin C. Feeley]

On Tue, 18 Feb 2003 [EMAIL PROTECTED] wrote:

>
>
>Dear Sir,
>
>I am using RedHat. I did update the system with Redhat online service, and I
>could not use X window after updating. The error message I got is

You should specify which _version_ of Red Hat's distribution you are 
using (e.g. 7.2, 7.3, 8.0).  It makes it easier to help you.

Do I understand correctly that _before_ you ran an "up2date" against the 
Red Hat Network your XFree86 ran properly?  If so do you remember which 
packages were updated?  You can see this by "cat /var/log/up2date" (or 
"cat /var/log/up2date.1" if /var/log/up2date is empty).

>
> "Fatal server error:
>could not open default font 'fixed'
>.."

This tells you that either the font called "fixed" is not installed on 
your system or that the _font_server_ is not running.  It is most likely 
that the font server (which is called "xfs" is not running).  You can 
use "/sbin/service xfs status" to see if it is running.  Or you can try 
"ps -ax | grep xfs").  If it seems that xfs is _not_ running then you 
can start it this way (on Red Hat 8.0) "/sbin/service xfs start".  Now, 
try to start XFree86.  If that works then make the change permanent by 
"/sbin/chkconfig --levels 35 xfs on".

 >The /var/log/XFree86.0.log file is attached here.(See attached file:
>XFree86.0.log)
>
>Would you please help me to check it?

Looking at the log it appears that you are using an "Nvidia" driver.  
Probably your kernel was updated by your last "up2date" and this has 
broken dependencies between the DRM module and the kernel.  You probably 
have to rebuild the nvidia driver against your new version of the 
kernel.  An alternative simpler way to do this (if I am correct) is to 
boot using the older kernel-version.

HTH,
Oisin Feeley

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Command Not Found when running Startx

[Oisin C. Feeley]

On Tue, 18 Feb 2003, Kevin B. Payne wrote:

>Debian GNU Storm Linux (2.2.16) on an
>AMD 300 CPU + IBM compatible system.
>
>During the process of fighting to remove the old Xserver 3.3.? I
>accidently lost the links or something that is necessary to allow my
>system to see where the Xserver's programs are. I can startx by hand by
>going to /usr/X11R6/bin and typing ./startx but then the program
>complians that xauth and xinit which are both found in the same folder
>aren't there...
> IE: It also says, "command not found" for those files and won't even
>make an attempt at starting.

It sounds as though your PATH doesn't contain the appropriate 
directories:

[ofeeley@ars ofeeley]$ echo $PATH
/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/ofeeley/bin

edit whatever files Storm Linux uses to set the PATH environment 
variable (perhaps /etc/profile ?)

>
>I have seen the Xserver running by using ./XFree86 -xf86config
>/etc/X11/XF86Config But even then it doesn't give me access to The
>Window Manager ( twm ) which is also in the same folder...

What do you mean "doesn't give me access" ?  Do you mean that if you do 
an "exec twm" it doesn't run?
  
>
>How can I tell Linux that these files are executable and add them to

Files are marked executable in most *NIX filesystems by having the "x" 
bit flipped on by chmod.  You need to make sure that you only make files 
executable by specific users for security reasons.  (It strikes me that 
you may be better starting off with a different distro than Storm Linux, 
or at the very least spending a bit of time with some manuals, HOWTOs 
(http://www.tldp.org) and books).

HTH,
Oisin Feeley

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Command Not Found when running Startx

[Kevin B. Payne]

Thank you for your input. The problem was caused by this distro. The default
working folder for the Xfree files was not the standard that the new
Installer automatically installes to... Therefore the link in /etc/profile
was not correct.

Now I amd getting "Unable to open wrapper config file
/etc/X11/Xwrapper.config" and at that point it crashes with Error number 111
"Connection refused"

Any ideas?

- Original Message -
From: "Oisin C. Feeley" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, February 18, 2003 5:37 PM
Subject: Re: [XFree86] Command Not Found when running Startx


> On Tue, 18 Feb 2003, Kevin B. Payne wrote:
>
> >Debian GNU Storm Linux (2.2.16) on an
> >AMD 300 CPU + IBM compatible system.
> >
> >During the process of fighting to remove the old Xserver 3.3.? I
> >accidently lost the links or something that is necessary to allow my
> >system to see where the Xserver's programs are. I can startx by hand by
> >going to /usr/X11R6/bin and typing ./startx but then the program
> >complians that xauth and xinit which are both found in the same folder
> >aren't there...
> > IE: It also says, "command not found" for those files and won't even
> >make an attempt at starting.
>
> It sounds as though your PATH doesn't contain the appropriate
> directories:
>
> [ofeeley@ars ofeeley]$ echo $PATH
> /usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/ofeeley/bin
>
> edit whatever files Storm Linux uses to set the PATH environment
> variable (perhaps /etc/profile ?)
>
> >
> >I have seen the Xserver running by using ./XFree86 -xf86config
> >/etc/X11/XF86Config But even then it doesn't give me access to The
> >Window Manager ( twm ) which is also in the same folder...
>
> What do you mean "doesn't give me access" ?  Do you mean that if you do
> an "exec twm" it doesn't run?
>
> >
> >How can I tell Linux that these files are executable and add them to
>
> Files are marked executable in most *NIX filesystems by having the "x"
> bit flipped on by chmod.  You need to make sure that you only make files
> executable by specific users for security reasons.  (It strikes me that
> you may be better starting off with a different distro than Storm Linux,
> or at the very least spending a bit of time with some manuals, HOWTOs
> (http://www.tldp.org) and books).
>
> HTH,
> Oisin Feeley
>
> ___
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86


___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Re: [XFree86] Thinkpad A31 and Radeon Mobility 7500

[Michel Dänzer]

On Die, 2003-02-18 at 19:28, Dominik Szczerba wrote:
> 
> I very much apologize for my ignorance on kernel-package stuff. I just
> compiled the modules myself, and brute-force copied radeon.o into my
> /lib/modules. IT WORKS! No more errors, no unstabilities (well,
> still I cant login, I have to kill login window, login via console and
> then startx).

If you're still using my packages, have you read
/usr/share/doc/xserver-xfree86-dri-trunk/README.Debian ?

Keep in mind though that my packages are bleeding edge DRI CVS
snapshots, you may prefer to use Daniel Stone's 4.2.99.x packages.


> However, I get 20% less acceleration than with (older?) knoppix XFree...
> glxgears give exactly 1kfps (0.1 before), while knoppix reports 1.2kfps.
> It is not disaster, but I am just ambitious: why did it all happen, and
> how/if could it have been avoided with normal sid xfree... and still,
> why is knoppix faster?

Not sure. First of all, are you sure you haven't mixed up the 'frames in
5 seconds' and FPS values? I ask because it's an easy mistake, and 1200
frames in 5 seconds would be 440 fps, which is about what I'd expect
from 4.2.x .

Something else to keep in mind is that people have been bitten by BIOS
CPU throttling 'features', which might only trigger with newer DRI
components because the use of interrupts decreases CPU usage (set
RADEON_NO_IRQS=1 to test this).

Here's a list of the major components having an influence on glxgears
framerate, roughly sorted by relevance:

  * how up to date radeon_dri.so is (the newer the better)
  * how up to date the DRM (radeon.o kernel module) is (the newer
the better)
  * whether page flipping (Option "EnablePageFlip", only in 4.2.99.x
or later) is enabled (page flipping is faster)
  * the AGP transfer rate (beware, anything more than 1x may be
unstable) and whether AGP fast writes (Option "AGPFastWrite")
are enabled (may again be unstable)

YMMV depending on the status of each of these.

For your reference, I get 1400-1500 fps on this PowerBook G4/667 with a
Radeon 7500 Mobility running at AGP 4x with fast writes using my
packages.


-- 
Earthling Michel Dänzer (MrCooper)/ Debian GNU/Linux (powerpc) developer
XFree86 and DRI project member   /  CS student, Free Software enthusiast

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] mouse crash

[frederick nguyen-xuan]

Hello

I wanted to send you my log file for an analyse, to find out what is going
wrong on my machine.

the system on which I try to run XFree86 is is a NetBSD 1.6 Duron 1GHz and a Abit KT7A.

Weither ATI Rage and geforce keep the problem. It seems to happen every time that the 
server detects a pointer motion/request: The server immediately goes down. 

Sincerly.

Frederick.

-

  = NGUYEN-XUAN Frederick =
==  {EPITECH.}  Promo 2006  ==

--


XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: NetBSD/i386 1.6 [ELF] The NetBSD Foundation, Inc.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 19 04:35:44 2003
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "aoc"
(**) |   |-->Device "atir"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us_intl"
(**) XKB: layout: "us_intl"
(**) Option "XkbVariant" "us"
(**) XKB: variant: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using pcvt driver (version 3.32)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on netbsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 147b,a401 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card , rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 147b, rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 1106,3057 rev 40 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5246 card 1002,0044 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1  0x - 0x (0x1) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1  0x - 0x (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1  0x - 0x (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1  0xd000 - 0xd0ff (0x100) IX[B]
[1] -1  0xd400 - 0xd4ff (0x100) IX[B]
[2] -1  0xd800 - 0xd8ff (0x100) IX[B]
[3] -1  0xdc00 - 0xdcff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1  0xdc00 - 0xddff (0x200) MX[B]
(II) Bus

[XFree86] Xfree HELP

[Slider Devils]

My Slackware Linux X server is not working. Atacched, the log.

And my monitor is LG StudioWorks 563A. Video Card SiS 315.

The error thar appears is :
No screens found.

Please help me as soon as you can, if can.

Thanks.



xfreelog.log
Description: Binary data

[XFree86] X11 crashing system with ATI Radeon 7500 QW...

[Gary Greene]

-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1

I've got a little problem with XFree's beta release 4.2.99. When I logout, or 
whenever the card blanks the screen (in X mode) my Linux system hangs and 
refuses to come out of the sinal off status. This happens only when DRI is 
enabled. with DRI off the card response normally. However, there goes my 3D 
Hardware support at that time:(

At this time I am forced to "zap" X to log in as another user, or since I've 
got X set up as a SysV-styled service, I have to run /etc/init.d/dm stop then 
restart it. This is a little aggrivating since I recently bought my ATI AIW 
Radeon 7500 because of the 3D support and the TV tuning capabilities.

I'll be more than happy to share my hardware and software info with whomever 
may be able to isolate/troubleshoot the cause.

- -- 
Gary L. Greene, Jr.
Sent from uriel.gvsu.edu
 00:03:29 up  1:42,  3 users,  load average: 0.00, 0.00, 0.00
===
Founder and president of GVLUG.
Chief Systems Architect, S4, Inc. - OS Department.
 -==-
Project Lead for the Sentinel Linux OS Project (KOMODO)
PHONE : 331-0562
EMAIL : [EMAIL PROTECTED]
[EMAIL PROTECTED]
===
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.2.1 (GNU/Linux)

iD8DBQE+UxS+Vg8c0/GZcW8RAlwGAJ9J8QeCkXHwkOx77czzjHATG8BhMQCfYpAq
fdypS6g04IZTeR01j/Jn8Eg=
=7emq
-END PGP SIGNATURE-

___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

[XFree86] Solution please !

[Subramanian. K]

I can't start x in my linux machine from a session other than 
root. What to do ? The log is given below.


-- 
mani Feb 19



XFree86 Version 4.1.0 (Red Hat Linux release: 4.1.0-3) / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.7-0.13.1smp i686 [ELF] 
Build Host: stripples.devel.redhat.com
 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 19 10:55:55 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "DELL 828FI"
(**) |   |-->Device "ATI Mach64 3D Rage IIC"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) xf86ReadBIOS: Failed to open /dev/mem (Operation not permitted)

Fatal server error:
xf86OpenConsole: Server must be suid root


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to [EMAIL PROTECTED]

[XFree86] bug or problem with ASUSA7V + ATI Xpert2000

[spirisi]

dear xfree86ists,
I'm spiri and I write you from Italy.
I 'd have liked very much to not disturb you, but I'd like to expose my X 
problem...
First of all, my HW configuration (in brief):
Asus A7V KT133;
386MB RAM;
Athlon ThB 700;
SoundBlaster Live!;
ATI Xpert2000 32MB.
Actually I'm running Slackware8.1 and Woody (and XP...), but I also used 
RedHat and Mandrake.
So...every OS I boot, I usually cannot starx (winXP: -> no ATI, but VGA 
standard).
I upgraded Asus BIOS to 1012 (if I'm not wrong...) and tried every bios cfg!
But nothing!
### I only could startx when reboot my pc! ###
(I really do not understand such a thing!).
I going to buy a new graphics-card if that is the problem (as I think).
Could you suggest my something about it?
It is a known problem-bug of ATI/ASUS or both?
I've searched by Saint Google but found a few guys with similar problems...
I hope my XFree.log-attachments could help in someway...
I thank you in advance !!!
Bye spiri
-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0278-027a : parport0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
7400-743f : Promise Technology, Inc. 20265
  7400-7407 : ide2
  7408-740f : ide3
  7410-743f : PDC20265
7800-7803 : Promise Technology, Inc. 20265
8000-8007 : Promise Technology, Inc. 20265
8400-8403 : Promise Technology, Inc. 20265
  8402-8402 : ide2
8800-8807 : Promise Technology, Inc. 20265
  8800-8807 : ide2
9000-9007 : Creative Labs SB Live! MIDI/Game Port
  9000-9007 : emu10k1-gp
9400-941f : Creative Labs SB Live! EMU10k1
  9400-941f : EMU10K1
b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
  b000-b01f : usb-uhci
b400-b41f : VIA Technologies, Inc. UHCI USB
  b400-b41f : usb-uhci
b800-b80f : VIA Technologies, Inc. Bus Master IDE
  b800-b807 : ide0
  b808-b80f : ide1
d000-dfff : PCI Bus #01
  d800-d8ff : ATI Technologies Inc Rage 128 RG
e200-e27f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]


XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
 (++) from command line, (!!) notice, (II) informational,
 (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.8.log", Time: Tue Feb 18 20:19:37 2003
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.5
	XFree86 XInput driver : 0.3
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0305 card 1043,8033 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8305 card , rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,8033 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 1106,0571 card , rev 10 class 01,01,8a hdr 00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:04:4: chip 1106,3057 card 1043,8033 rev 30 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,8027 rev 06 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 06 class 09,80,00 hdr 80
(II) PCI: 00:11:0: chip 105a,0d30 card 105a,4d33 rev 02 class 01,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5247 card 1002,0008 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unload

[XFree86] Problem booting into GUI

[Mell Anico]

I am using Red Hat linux v7.3 and I am currently
having problem booting my Linux server in GUI (using
KDM). I tried reboot a number of times and still did
not come up with the GUI login screen. This problem
started when the print servers hosted in this linux
box stop responding and I decided to reboot. Then I
cannot boot in GUI mode, although the server is still
functioning as I can telnet into it. Can you please
help us in restoring the GUI boot in our Linux server?
What we can do to resolve??

Thanks and regards.

Mell Anico
BKI, Singapore

__
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
http://shopping.yahoo.com
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86