AW: [XFree86] XFree86 4.2.1 on Toshiba Sattelite 4090XCDT
When I upgrade to XFree86 4.3.0 I still get the same problem. Perhaps somebody who wrote the driver knows what was change from 4.1 to 4.2!? Jan. -Ursprungliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Alan Hourihane Gesendet: Sonntag, 22. Juni 2003 00:33 An: [EMAIL PROTECTED] Betreff: Re: [XFree86] XFree86 4.2.1 on Toshiba Sattelite 4090XCDT Upgrade to XFree86 4.3.0 Alan. On Sat, Jun 21, 2003 at 10:15:31AM +0200, Jan Stillings wrote: > Hi, > > I have updatet my xserver 4.1.0 to 4.2.1 and 4.3.0 on my > Toshiba Sattelite 4090XCDT with a Trident Cyber9525DVD > graphics chip. With version 4.1.0 all worked perfect but > after the upgrade i had some serious problems with my > colors. Nearly all colors are displayed very dark. > The XServer runs and doesn't crash. Only I can't see what > is displayed. I had the same problems running Debian, > SuSE 8.1, KNOPPIX and other distributions therefore > I think the problem results from the xserver. I tried out both > the trident and the VESA driver resulting in the same effects. > > Has somebody a solution? > > Greetings > > Jan Stillings > > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] cannot load startx
On Sunday, June 22, 2003 10:55 pm, root wrote: > nothing :^( Your log doesn't indicate any error. Probably what's happening is X is starting successfully but whatever program it's trying to run either doesn't exist or exits/crashes immediately. Try this: startx $(which xterm) This ought to start the X server and connect an xterm to it. Whenever the xterm quits, the X server stops too. Tell us if it works. -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ End communication. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xserver crashes
On Mon, 2003-06-23 at 08:44, firoz wrote: > my system configuration is as follows : > intel pentium 4 1.7 Ghz > 256 mb ram > nvidia riva tnt model 64 / model 64 pro > acer ac711 17 " monitor > genius netscroll + ps/2 mouse > plz help me ... my xserver crashes > I have had most success by changing the card driver to "vesa" in the XF86Config or XF86Config-4 files in the /etc/X11 HTH -- Sudev Barar <[EMAIL PROTECTED]> ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] 答复: [XFree86] xserver crashes
On Mon, 23 Jun 2003 [EMAIL PROTECTED] wrote: > I think the best way for you is finding out and setuping the nvidia driver from the > www.nvidia.com. > > wish it can help you. 8-) Won't help, since according to his log, he doesn't have an NVIDIA chip. The stock XFree86 would have worked fine if that was actually a TNT M64. Mark. > > Tom > -ì©l?¥ó- > ?¥ó¤H: firoz [mailto:[EMAIL PROTECTED] > ?°e??: 2003¦~6¤ë23¤é 11:15 > ¦¬¥ó¤H: [EMAIL PROTECTED] > ¥D?: [XFree86] xserver crashes > > > my system configuration is as follows : > intel pentium 4 1.7 Ghz > 256 mb ram > nvidia riva tnt model 64 / model 64 pro > acer ac711 17 " monitor > genius netscroll + ps/2 mouse > plz help me ... my xserver crashes > > > the full bug report is attached > > > > > > > Do you Yahoo!? > SBC Yahoo! DSL - Now only $29.95 per month! > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xserver crashes
On Sun, 22 Jun 2003, firoz wrote: > my system configuration is as follows : > intel pentium 4 1.7 Ghz > 256 mb ram > nvidia riva tnt model 64 / model 64 pro > acer ac711 17 " monitor > genius netscroll + ps/2 mouse > plz help me ... my xserver crashes > You don't have a NVIDIA chip you have an SiS chip: (--) PCI:*(1:0:0) SiS 300 rev 144, Mem @ 0xe800/27, 0xff8e/17, I/O @ 0xc c00/7, BIOS @ 0xff8d/16 Start by using the correct driver (the "sis" driver). Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 23 11:33:52 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000600c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:0c:0: chip 10ec,8139 card 1186,1300 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 5333,8a13 card 5333,8a13 rev 02 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xdc00 - 0xe3ef (0x7f0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe3f0 - 0xe3ff (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) S3 Inc. 86c368 [Trio 3D/2X] rev 2, Mem @ 0xdc00/26, BIOS @ 0xe3ff/16 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0x0009 (0xa) MX[B] [5] -1 0 0x - 0x (0x1) IX[B] [6] -1 0 0x - 0x00ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe400 from 0xe7ff to 0xe3ff (II) Active PCI resource ranges: [0] -1 0 0xdb80 - 0xdb8000ff (0x100) MX[B] [1] -1 0 0xe400 - 0xe3ff (0x0) MX[B]O [2] -1 0 0xe3ff - 0xe3ff (0x1) MX[B](B) [3] -1 0 0xdc00 - 0xdfff (0x400) MX[B](B)
[XFree86] cannot load startx
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Jun 23 11:33:52 2003 (==) Using config file: "/etc/X11/XF86Config" waiting for X server to shut down
[XFree86] Radeon 7500 DRI Lockup
Someone else on this list seemed to have the exact same problem... When I try to start X with DRI, I get a black screen. I can telnet in from a different host, though, and through that I see that X is taking 100% cpu time. When I SIGKILL X, the computer halts. http://ioioio.net/XF86Config http://ioioio.net/XFree86.0.log -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ End communication. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] 答复: [XFree86] xserver crashes
I think the best way for you is finding out and setuping the nvidia driver from the www.nvidia.com. wish it can help you. 8-) Tom -ì©l?¥ó- ?¥ó¤H: firoz [mailto:[EMAIL PROTECTED] ?°e??: 2003¦~6¤ë23¤é 11:15 ¦¬¥ó¤H: [EMAIL PROTECTED] ¥D?: [XFree86] xserver crashes my system configuration is as follows : intel pentium 4 1.7 Ghz 256 mb ram nvidia riva tnt model 64 / model 64 pro acer ac711 17 " monitor genius netscroll + ps/2 mouse plz help me ... my xserver crashes the full bug report is attached Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] How to reduce the size of XFree86 in RedHat 9?
Title: How to reduce the size of XFree86 in RedHat 9? Hi, All I want reduce the size of X in RedHat 9. My idea size is about 30M with fvwm. Somebady tell me, I can just keep the lib & bin folder in the /usr/X11. But the size of the two folders is about 90 M. Can you give me any information or suggestion about the files' structure of XFree86 or how to reduce the XFree86? Thanks Tom
Re: [XFree86] (no subject)
The problem lies with the Nvidia nforce chipset utilised with the Asus A7n266-VM motherboard. I have the same mobo and am using the same version of Redhat Linux. To fix this problem you need to first install in text mode, taking care NOT to install/setup the Xserver first. Then, get hold of audio and video drivers from the Nvidia website and do the needful. For further details, you can also goto nvnews.net.enthil kumar <[EMAIL PROTECTED]> wrote: respected sir/madami have purchased Redhat Linux 8.0 cds i also install to my system.my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution it will hanging as well as not any action please give solutionmy system monitor is Samsung SyncMaster 753s 17''my driver status is Nvidia getforce my board is Asus Motherboard and Amd ProcessorYours FaithfullyR.S.SenthilKumar SMS using the Yahoo! Messenger; Download latest version.
[XFree86] xserver crashes
my system configuration is as follows : intel pentium 4 1.7 Ghz 256 mb ram nvidia riva tnt model 64 / model 64 pro acer ac711 17 " monitor genius netscroll + ps/2 mouse plz help me ... my xserver crashes the full bug report is attached Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! XFree86.0.log Description: XFree86.0.log
[XFree86] Can't run startx, KDE, GNOME
I cannot get startx or any GUI to work. When I type startx my monitor shuts off and my computer freezes. I can't reboot it or anything -- the only way to get out of it is to manually turn the computer off. I tried a different monitor and that made no difference. I'm running Mandrake 9.1 on a Celeron 500 with a Radeon 7000 32MB PCI card. For whatever reason, I cannot get X server to work at all. If I type startkde I get the following error message: xmodmap: unable to open display "xmodmap: unable to open display "xset: unable to open display ""startkde: starting upksplash: cannot connect to X serverkdeinit: Aborting. $DISPLAY is not set.Warning: connect() failed: : No such file or directoryksmserver: cannot connect to X serverstartkde: shutting down...Warning: connect() failed: : No such file or directoryError: Can't contact kdeinit!startkde: Running shutdown scripts...startkde: Done. If I try to start GNOME, I get the monitor shutdown thing, same as with startx. I have a total of two days worth of Linux/Unix experience, so I am baffled and I need someone to really hold my hand. I checked at ati.com for Linux drivers, and supposedly Mandrake 9.1 has XFree86 4.3, which supposedly already has a radeon driver. Any suggestions?
Re: [XFree86] Help me please!!!!!!
I write the new parameter in the XFreee86. config file, but the not start and the font for the screen change to blue coulor. Do you have what the parameter is correct for the BusID for my card? Thanks XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 16:42:56 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun 22 20:43:35 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8058, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7030 card , rev 02 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7000 card , rev 01 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7010 card , rev 00 class 01,01,80 hdr 00 (II) PCI: 00:0a:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:00:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:01:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:02:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:03:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:04:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:05:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:06:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:07:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:08:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:09:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0a:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0b:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0c:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0d:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0e:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:0f:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:10:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:11:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:12:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:13:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:14:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:15:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:16:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:17:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:18:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:19:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:1a:0: chip 5333,88f0 card , rev 00 class 03,00,00 hdr 00 (II) PCI: 20:1b:0: chip 5333,88f0 c
[XFree86] X forwarding
I am desperately in need of help. I have the following set up ++ ++++++ | A | >>ssh>> | B | >>ssh>>| C | >>ssh>> | D | ++ ++++++ a and D are both on private networks and can't talk to each other, but b and c can talk to each other and b can talk to a and c can talk to d, I am trying to get an X application on D to show up on A. A, B, and D have X installed but C does NOT have X installed. When i try to do an ssh -X from A to B it works fine, but when i do that from B to C it does not set the diplay to anything. and when i do ssh -X from C to D again the display is not set and i dont get any forwarding, any help would be great ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Error Message Help
Any client which wants to talk to the server needs to have authorization to do so. X is a network transparent window system and it's what keeps *me* from popping windows up on *your* server. It also keeps other processes on your system (potentially owned by other users) from displaying or getting information from the screen. That's what's happening in this case since it's rejecting from "localhost". Whatever is trying to connect to your server doesn't have authorization to do so. I would guess it's a bug in your display manager or a script related to it. Also, some apps like xscreensaver can have this problem if you are running as root. See the man page on xhost. Mark. On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote: > I guess I'm not clear as to what an unauthorized > client is. > Is this something I need to correct? Never happened > before. > Thanks, > > > --- Mark Vojkovich <[EMAIL PROTECTED]> wrote: > > On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote: > > > > > This message is in my XFree86.log Can someone tell > > me > > > what this means and how to correct? > > > Thanks, > > > > > > > > > AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4 > > > rejected from local host > > > >It means the X-server denied a particular > > XOpenDisplay() > > request from some client because it was not > > authorized to > > connect to the X-server. It is the correct > > behavior for > > dealing with unauthorized clients. > > > > > > Mark. > > > > ___ > > XFree86 mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xfree86 > > > __ > Do you Yahoo!? > SBC Yahoo! DSL - Now only $29.95 per month! > http://sbc.yahoo.com > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Error Message Help
I guess I'm not clear as to what an unauthorized client is. Is this something I need to correct? Never happened before. Thanks, --- Mark Vojkovich <[EMAIL PROTECTED]> wrote: > On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote: > > > This message is in my XFree86.log Can someone tell > me > > what this means and how to correct? > > Thanks, > > > > > > AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4 > > rejected from local host > >It means the X-server denied a particular > XOpenDisplay() > request from some client because it was not > authorized to > connect to the X-server. It is the correct > behavior for > dealing with unauthorized clients. > > > Mark. > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] crash on exiting XFree with xinerama
My guess is that this would be a driver problem with the one of the cards and is probably not a configuration issue. Which screen is the primary? Ie, which screen does the machine boot up on? If you can go into your motherboard bios and switch those around, you may have better luck with it. Some drivers have problems when they are the secondary card. Mark. On Sun, 22 Jun 2003, db administrator wrote: > Dear Users and Experts, > > my machine has the following problem. When I exit XFree86 > (configured with Xinerama) the second screen becomes inaccessible and > the display manager (kdm) does not redisplay its window. Moreover, the > system does not accept ssh connections. However, if a ssh is *already* > open at the time of exiting XFree86, I can kill relevant processes, > start the dm again and login (although the second screen fails to > initialize). This problem used to occur in the previous release of > Mandrake (and XFree86) as well. I remember to have read somewhere in > the xfree86 site that a bug like this had been fixed or assigned but I > cannot find the reference any more. > > My current configuration is: > > Mandrake 9.1 with all (relevant) updates applied > XFree86 4.3 > 3dfx vodoo3 16M AGP (1st screen) > S3VirgeDX 4M PCI (2nd screen) > AMD Duron 1.2GHz > XF86Config-4: see below signature > > I would really appreciate suggestions or comments and reports from > anyone with a similar configuration (especially video cards) or any > suggestion. > > Thank you > > Stefano > > > Section "Files" > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Mandrake 6.0 and later now use a font server > independent of > # the X server to render fonts. > FontPath "unix/:-1" > EndSection > > Section "ServerFlags" > #DontZap # disable (server abort) > AllowMouseOpenFail # allows the server to start up even if the mouse > doesn't work > #DontZoom # disable / (resolution switching) > EndSection > > Section "Module" > Load "dbe" # Double-Buffering Extension > Load "v4l" # Video for Linux > Load "extmod" > Load "type1" > Load "freetype" > Load "glx" # 3D layer > Load "dri" # direct rendering > EndSection > > Section "DRI" > Mode 0666 > EndSection > > Section "InputDevice" > Identifier "Keyboard1" > Driver "Keyboard" > Option "XkbModel" "pc105" > Option "XkbLayout" "us" > Option "XkbCompat" "" > Option "XkbOptions" "" > EndSection > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/usbmouse" > Option "ZAxisMapping" "4 5" > EndSection > > Section "Monitor" > Identifier "monitor1" > VendorName "Digital Equipment Corp." > ModelName "Digital 17 in. Color (SN-VRTX7-WA)" > HorizSync 31.5-82 > VertRefresh 50-76 > EndSection > > Section "Monitor" > Identifier "Sun 3651324-01" > VendorName "Sun" > ModelName "GDM-20D10" > HorizSync 60-85 > VertRefresh 65-77 > # 1152x900 @ 66 Hz, 61.8 kHz hsync > Modeline "1152x900" 94.5 1152 1240 1440 1528 900 908 916 936 > -hsync -vsync > # 1152x900 @ 76 Hz, 71.67 kHz hsync > Modeline "1152x900" 108 1152 1176 1336 1504 900 908 916 945 > -hsync -vsync > EndSection > > Section "Device" > Identifier "device1" > VendorName "3Dfx Interactive, Inc." > BoardName "Voodoo3 (generic)" > Driver "tdfx" > BusID "PCI:1:0:0" > Option "DPMS" > EndSection > > Section "Device" > Identifier "device2" > VendorName "S3" > BoardName "ViRGE (generic)" > Driver "s3virge" > Option "DPMS" "on" > BusID "PCI:0:12:0" > EndSection > > Section "Screen" > Identifier "screen1" > Device "device2" > Monitor"monitor1" > DefaultColorDepth 24 > Subsection "Display" > Depth 24 > Modes "1024x768" "800x600" #"640x480" > EndSubsection > EndSection > > Section "Screen" > Identifier "screen2" > Device "device1" > Monitor"Sun 3651324-01" > DefaultColorDepth 24 > Subsection "Display" > Depth 24 > Modes "1152x900" "1152x864" "1024x768" > EndSubsection > EndSection > > Section "ServerLayout" > Identifier "layout1" > Screen "screen2" > Screen "screen1" RightOf "screen2" > Option "Xinerama" "on" > InputDevice "Keyboard1" "CoreKeyboard" > InputDevice "Mouse1" "CorePointer" > EndSection > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] (no subject)
You need to upgrade your XFree86 version to 4.3 OR you need to use NVIDIA's binary Linux drivers which will work with your current XFree86 version. Mark. On 22 Jun 2003, shanmugham senthil kumar wrote: > respected sir/madam i have purchased Redhat Linux 8.0 cds i have install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvida getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Error Message Help
On Sun, 22 Jun 2003 [EMAIL PROTECTED] wrote: > This message is in my XFree86.log Can someone tell me > what this means and how to correct? > Thanks, > > > AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4 > rejected from local host It means the X-server denied a particular XOpenDisplay() request from some client because it was not authorized to connect to the X-server. It is the correct behavior for dealing with unauthorized clients. Mark. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] No window
Do things change if you start with "X -ac" ? Mark. On Sun, 22 Jun 2003, Stephane Corbe wrote: > Hello, > > I tried to upgrade from 4.3.0 to the cvs snapshot, but I have problem : > > I started X just by typing "X" so I have the X background and the mouse. > From another console I typed "export DISPLAY=:0" and "xclock" : > nothing is printed on the console, nothing is displayed on the X screen. > There's no error on the console, in log/message nor XFree0log. > > This is exactly the same behavior with other X app, everybody seems happy but I > never saw a window ... > > Stephane > > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86 version 4.2.99
Hello, I've received the info, that the version 4.2.99 (the last before 4.3.0) could help to solve the problem with my ATI Rareon card. Can sombody give me a hint / link to find this version of XFree86 ? thanx in advance oTTo JmgRunD ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Help enabling X extensions, Xrunner program
Title: Help enabling X extensions, Xrunner program I am trying to get my X test suite running on RedHat 9.0/XFree86 4.3.0 on an IBM 225 eServer (Xeon) w/ onboard ATI Mach64 card. Currently I have added "Load" lines to the Module Section of my XF86Config file, however I cannot seem to get XTestExtension1 recognized as a valid extension. I downloaded the source of XFree86 and it appears like code from XTestExtension1 is bound into libXext.so but how do I enable it? No library file exists in ./usr/X11R6/lib/modules/extensions so how does it get enabled? The root problem I am trying to debug is that I cannot seem to get "Mouse playback" working with my Xrunner product to the XFree86 screen. Playback works on another propriety X11R6.6-based Xserver(same HW, RH9.0) I have limited access to. It has the XTestExtension1. Unfortunately, my Xrunner is running on an old Tru64 unix box and the version is 6 years old, so I no longer have any support. Any help appreciated, Erik Reference data below... Current module section of my /etc/X11/XF86Config file. Section "Module" Load "record" # X event recorder Load "xtrap" # You only need the following two modules if you do not use xfs. # Load "freetype" # TrueType font handler # Load "type1" # Adobe Type 1 font handler Load "dbe" # Double-buffering Load "GLcore" # OpenGL support Load "dri" # Direct rendering infrastructure Load "glx" # OpenGL X protocol interface Load "extmod" # Misc. required extensions Load "v4l" # Video4Linux EndSection Below is a output from "xdpyinfo" (partial). => xdpyinfo -display :0 | more name of display: :0.0 version number: 11.0 vendor string: The XFree86 Project, Inc vendor release number: 4030 XFree86 version: 4.3.0 maximum request size: 4194300 bytes motion buffer size: 256 bitmap unit, bit order, padding: 32, LSBFirst, 32 image byte order: LSBFirst number of supported pixmap formats: 7 supported pixmap formats: depth 1, bits_per_pixel 1, scanline_pad 32 depth 4, bits_per_pixel 8, scanline_pad 32 depth 8, bits_per_pixel 8, scanline_pad 32 depth 15, bits_per_pixel 16, scanline_pad 32 depth 16, bits_per_pixel 16, scanline_pad 32 depth 24, bits_per_pixel 32, scanline_pad 32 depth 32, bits_per_pixel 32, scanline_pad 32 keycode range: minimum 8, maximum 255 focus: window 0x40002c, revert to PointerRoot number of extensions: 30 BIG-REQUESTS DEC-XTRAP DOUBLE-BUFFER DPMS Extended-Visual-Information FontCache GLX LBX MIT-SCREEN-SAVER MIT-SHM MIT-SUNDRY-NONSTANDARD RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC TOG-CUP X-Resource XC-APPGROUP XC-MISC XFree86-Bigfont XFree86-DGA XFree86-Misc XFree86-VidModeExtension XInputExtension XKEYBOARD XTEST Xvideo Below is output from /var/log/XFree86*log ... XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun 22 16:50:33 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "VP201mb" (**) | |-->Device "ATI Mach64" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/local/fonts,unix/:7100,/usr/lib/X11/fonts/misc" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "DontZap" (**) Option "DontZoom" (--) using VT number 2 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Re
[XFree86] Send problem report
I have a problem while i try to start XWindow During the red hat installation i cannot install in graphic mode because XWindow fail start. I have installed red hat in text mode and now i have this problem. Good work. XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 20 10:30:01 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "it" (**) XKB: layout: "it" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1106,3189 card 1106,3189 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1106,b168 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 1283,8872 card , rev 01 class 07,00,02 hdr 00 (II) PCI: 00:0b:0: chip 1397,2bd0 card 1397,2bd0 rev 02 class 02,80,00 hdr 00 (II) PCI: 00:0c:0: chip 1013,6003 card 1681,a011 rev 01 class 04,01,00 hdr 00 (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80 (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00 (II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80 (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00 (II) PCI: 00:11:5: chip 1106,3059 card 4005,24dc rev 50 class 04,01,00 hdr 00 (II) PCI: 00:12:0: chip 1106,3065 card 1106,0102 rev 74 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4966 card 174b,7194 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0xa000 - 0xa0ff (0x100) IX[B] [1] -1 0 0xa400 - 0xa4ff (0x100) IX[B] [2] -1 0 0xa800 - 0xa8ff (0x100) IX[B] [3] -1 0 0xac00 - 0xacff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xe000 - 0xe00f (0x10) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd800 - 0xdfff (0x800) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 If [Radeon 9000] rev 1, Mem @ 0xd800/27, 0xe002/16, I/O @ 0xa000/8 (II) Addressable bus resource ranges are
[XFree86] crash on exiting XFree with xinerama
Dear Users and Experts, my machine has the following problem. When I exit XFree86 (configured with Xinerama) the second screen becomes inaccessible and the display manager (kdm) does not redisplay its window. Moreover, the system does not accept ssh connections. However, if a ssh is *already* open at the time of exiting XFree86, I can kill relevant processes, start the dm again and login (although the second screen fails to initialize). This problem used to occur in the previous release of Mandrake (and XFree86) as well. I remember to have read somewhere in the xfree86 site that a bug like this had been fixed or assigned but I cannot find the reference any more. My current configuration is: Mandrake 9.1 with all (relevant) updates applied XFree86 4.3 3dfx vodoo3 16M AGP (1st screen) S3VirgeDX 4M PCI (2nd screen) AMD Duron 1.2GHz XF86Config-4: see below signature I would really appreciate suggestions or comments and reports from anyone with a similar configuration (especially video cards) or any suggestion. Thank you Stefano Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable / (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "DRI" Mode 0666 EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbCompat" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/usbmouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Digital Equipment Corp." ModelName "Digital 17 in. Color (SN-VRTX7-WA)" HorizSync 31.5-82 VertRefresh 50-76 EndSection Section "Monitor" Identifier "Sun 3651324-01" VendorName "Sun" ModelName "GDM-20D10" HorizSync 60-85 VertRefresh 65-77 # 1152x900 @ 66 Hz, 61.8 kHz hsync Modeline "1152x900" 94.5 1152 1240 1440 1528 900 908 916 936 -hsync -vsync # 1152x900 @ 76 Hz, 71.67 kHz hsync Modeline "1152x900" 108 1152 1176 1336 1504 900 908 916 945 -hsync -vsync EndSection Section "Device" Identifier "device1" VendorName "3Dfx Interactive, Inc." BoardName "Voodoo3 (generic)" Driver "tdfx" BusID "PCI:1:0:0" Option "DPMS" EndSection Section "Device" Identifier "device2" VendorName "S3" BoardName "ViRGE (generic)" Driver "s3virge" Option "DPMS" "on" BusID "PCI:0:12:0" EndSection Section "Screen" Identifier "screen1" Device "device2" Monitor"monitor1" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1024x768" "800x600" #"640x480" EndSubsection EndSection Section "Screen" Identifier "screen2" Device "device1" Monitor"Sun 3651324-01" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1152x900" "1152x864" "1024x768" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen2" Screen "screen1" RightOf "screen2" Option "Xinerama" "on" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" EndSection ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] (no subject)
respected sir/madam i have purchased Redhat Linux 8.0 cds i also install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution it will hanging as well as not any action please give solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvidia getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar
[XFree86] (no subject)
respected sir/madam i have purchased Redhat Linux 8.0 cds i also install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution it will hanging as well as not any action please give solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvida getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar
[XFree86] (no subject)
respected sir/madam i have purchased Redhat Linux 8.0 cds i also install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvida getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar
[XFree86] (no subject)
respected sir/madam i have purchased Redhat Linux 8.0 cds i have install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvida getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar
[XFree86] (no subject)
respected sir/madam i have purchased Redhat Linux 8.0 cds i have install to my system. my system didn't detect the monitor to gui but it detect in the text mode so i want the solution to interface to GUI to my system please give the solution my system monitor is Samsung SyncMaster 753s 17'' my driver status is Nvida getforce my board is Asus Motherboard and Amd Processor Yours Faithfully R.S.SenthilKumar
[XFree86] Error Message Help
This message is in my XFree86.log Can someone tell me what this means and how to correct? Thanks, AUDIT: Sun Jun 22 07:33:20 2003: 3170 X: client 4 rejected from local host __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: Re : Re : [XFree86] How do I use these options?
Emmanuel writes: > On 2003.06.20 18:10, Christoffer Dahl Petersen wrote: > > fre, 2003-06-20 kl. 14:31 skrev Emmanuel: > > > > > All these options are commented out by the leading "#". You just > > have > > > to remove it to active the option. Moreover several of this option > > > takes an argument (the type of which is indicated in the right > > comment, > > > ie [] means that you must put "true" or "false" as arguments > > > (with the quotes IIRC)). > > > > Yes I know :) , but can someone explain what the option do/meen? - > > the option "name" dosent explain it self. > > Sorry ;-) But I don't know what are the options for your driver. Try on > the web or hope that someone smarter will answer to you. > Bye > Manu You may try: man ie. man radeon to get a man page and a discription of options. Egbert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] No window
You probably clobered the init file in which you started whichever window manager you were using. The file is usually .initrc (I am not sure, I am not on my linux mobo) but it can be something else (I believe RH uses .Clients or something like that...) depending on your distro Lionel --- Stephane Corbe <[EMAIL PROTECTED]> wrote: > Hello, > > I tried to upgrade from 4.3.0 to the cvs snapshot, but I have problem : > > I started X just by typing "X" so I have the X background and the mouse. > From another console I typed "export DISPLAY=:0" and "xclock" : > nothing is printed on the console, nothing is displayed on the X screen. > There's no error on the console, in log/message nor XFree0log. > > This is exactly the same behavior with other X app, everybody seems happy but I > never saw a > window ... > > Stephane > > > # XFree86 4 configuration created by redhat-config-xfree86 > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Screen0" > InputDevice"Mouse0" "CorePointer" > InputDevice"Keyboard0" "CoreKeyboard" > InputDevice"DevInputMice" "AlwaysCore" > EndSection > > Section "Files" > > # RgbPath is the location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are concatenated together) > # By default, Red Hat 6.0 and later now use a font server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" >Load "dri" > EndSection > > Section "InputDevice" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # To disable the XKEYBOARD extension, uncomment XkbDisable. > # Option "XkbDisable" > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant""nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions""ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions""ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "keyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "jp106" > Option "XkbLayout" "jp" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "PS/2" > Option "Device" "/dev/psaux" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "InputDevice" > > # If the normal CorePointer mouse is not a USB mouse then > # this input device can be used in AlwaysCore mode to let you > # also use USB mice at the same time. > Identifier "DevInputMice" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName"NEC MultiSync LCD1701" > HorizSync31.0 - 81.0 > VertRefresh 56.0 - 60.0 > Option "dpms" > EndSection > > Section "Device" > Identifier "Videocard0" > Driver "radeon" > VendorName "Videocard vendor" > BoardName "ATI Radeon 7000" > Option "ForcePCIMode" "true" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor"Monitor0" > DefaultDepth 16 > SubSection "Display" > Depth16 > Modes"1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "DRI" > Group0 > Mode 0666 > EndSection > > > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs). > > XFree86 Version 4.3.99.
[XFree86] No window
Hello, I tried to upgrade from 4.3.0 to the cvs snapshot, but I have problem : I started X just by typing "X" so I have the X background and the mouse. From another console I typed "export DISPLAY=:0" and "xclock" : nothing is printed on the console, nothing is displayed on the X screen. There's no error on the console, in log/message nor XFree0log. This is exactly the same behavior with other X app, everybody seems happy but I never saw a window ... Stephane # XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "Default Layout" Screen "Screen0" InputDevice"Mouse0" "CorePointer" InputDevice"Keyboard0" "CoreKeyboard" InputDevice"DevInputMice" "AlwaysCore" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant""nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions""ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions""ctrl:nocaps" # Identifier "Keyboard0" Driver "keyboard" Option "XkbRules" "xfree86" Option "XkbModel" "jp106" Option "XkbLayout" "jp" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "InputDevice" # If the normal CorePointer mouse is not a USB mouse then # this input device can be used in AlwaysCore mode to let you # also use USB mice at the same time. Identifier "DevInputMice" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName"NEC MultiSync LCD1701" HorizSync31.0 - 81.0 VertRefresh 56.0 - 60.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "radeon" VendorName "Videocard vendor" BoardName "ATI Radeon 7000" Option "ForcePCIMode" "true" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor"Monitor0" DefaultDepth 16 SubSection "Display" Depth16 Modes"1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group0 Mode 0666 EndSection This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.6 Release Date: 18 June 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-13.9 i686 [ELF] Build Date: 22 June 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/va
Re: [XFree86] cant start gui
I thought that the 845 was first supported by X 4.3 which would be RH 9.0 Lionel --- rajaguru mahadevan <[EMAIL PROTECTED]> wrote: > redhat 8.0 gui won't start because i changed the display resolution to > 1024 * 768 at 24 bitsper second > the monitor is a lg 500g > 845 intel glly original motherboard > we tried xf86 config but the display took bizzare size > tell us more test to pin down the problem > should the installation of the entire software in the 3 cd s solve the > problem , we installed only 75% of the problem > > please send us a pointer on how to install new software for our system > > SMS using the Yahoo! Messenger;Download latest version. __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] compiling XFree86 4.3.0 and matrox drivers 2.1
I am confronted with a similar problem I understood that, according to this list, one should use the X 4.2 Matrox drivers instead of the ones for 4.3 I would be interested to have that confirmed Lionel --- Ian Romanick <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] wrote: > > I have downloaded the XFree86 4.3.0 source code and the mgadrivers-2.1-src > > from matrox's web site. I am running linux kernel 2.4.20 with glibc-2.3.1 > > and gcc 3.2.1. do I need to copy the mgadrivers source into the xc > > directory to compile them or do I need to copy them into my linux source > > tree and re-compile my kernel? > > Unless they've updated something when I wasn't look, the drivers > provided by Matrox do *not* work with XFree86 4.3.0. Just use the ones > that come with XFree86. > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86 errors.
first check on your log which version of X you run (RH 7.3 has both 3.3.6 and 4.1 if I remember well) Check in the same log whether it uses XF86Config or XF86Config-4 Then look in the appropriate file whether there is a Section Keyboard if yes this is a 3.3.6 config file if not it is a X 4.x config file, does it fit with what you are running? (probably not from the error message) use Xconfigurator to generate an appropriate config file for that version of RH... Lionel --- Mark Vojkovich <[EMAIL PROTECTED]> wrote: >Isn't xf86config an XFree86 3.x config tool? It sounds like maybe > you are forcing it to use the old XFree86 3.x when you run xf86config > and then your distribution "fixes" it so you run XFree86 4.x but the > old and incompatible XF86Config file is being used. You should run > "XFree86 -configure" which is the XFree86 4.x config file generator, > or use Red Hat's config tool (xconfigurator ?). > > > Mark. > > On Sat, 21 Jun 2003, 640 (@Home) wrote: > > > Hi everyone. > > I've just subscribed to this list for some post-installation troubleshooting > > for Xfree86 (as per the error output) > > > > Here's the prob. > > Running (as root) XF86config, the config script goes through and asks me the > > relevant questions, and writes the new XF86Config file. I start x with > > "startx" and I get a screen with a bash shell in it. (I used apt-get to > > install the xfree86 packages. My install is Redhat 7.3 and was bare bones > > text based prior to my XF experiences today. > > When I run XFree the Next time, it bombs out with this error > > > > snip > > > > Parse error on line 207 of section InputDevice in file /etc/X11/XF86Config > > "Device" is not a valid keyword in this section. > > (EE) Problem parsing the config file > > (EE) Error from xf86HandleConfigFile() > > > > Fatal server error: > > no screens found > > > > un-snip > > The only way to successfully run XF is only after I go through the > > XF86config before start. > > Painfull indeed. > > > > Any clues? > > > > Thanks > > Andy > > > > All outgoing emails are scanned with virus scanning software > > with daily virus definition updates. > > > > > > ___ > > XFree86 mailing list > > [EMAIL PROTECTED] > > http://XFree86.Org/mailman/listinfo/xfree86 > > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
