Re: [zfs-discuss] zpool wont get back online
On Mon, 19 Oct 2009, Jonas Nordin wrote: Hi, thank you for replying. I tried to set a label but I got this. #format -e The device does not support mode page 3 or page 4, or the reported geometry info is invalid. WARNING: Disk geometry is based on capacity data. Maybe your drives have bad firmware? Certain products (e.g. particular Seagate models) are known to spontaneously expire due to firmware bugs. Bob -- Bob Friesenhahn bfrie...@simple.dallas.tx.us, http://www.simplesystems.org/users/bfriesen/ GraphicsMagick Maintainer,http://www.GraphicsMagick.org/ ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] zpool wont get back online
Hi, thank you for replying. I tried to set a label but I got this. #format -e The device does not support mode page 3 or page 4, or the reported geometry info is invalid. WARNING: Disk geometry is based on capacity data. The current rpm value 0 is invalid, adjusting it to 3600 The device does not support mode page 3 or page 4, or the reported geometry info is invalid. WARNING: Disk geometry is based on capacity data. The current rpm value 0 is invalid, adjusting it to 3600 The device does not support mode page 3 or page 4, or the reported geometry info is invalid. WARNING: Disk geometry is based on capacity data. The current rpm value 0 is invalid, adjusting it to 3600 The device does not support mode page 3 or page 4, or the reported geometry info is invalid. WARNING: Disk geometry is based on capacity data. The current rpm value 0 is invalid, adjusting it to 3600 done c5t1d0: configured with capacity of 698.60GB c6t0d0: configured with capacity of 698.60GB c7t0d0: configured with capacity of 698.60GB c7t1d0: configured with capacity of 698.60GB AVAILABLE DISK SELECTIONS: 0. c5t0d0 /p...@0,0/pci1043,8...@5/d...@0,0 1. c5t1d0 /p...@0,0/pci1043,8...@5/d...@1,0 2. c6t0d0 /p...@0,0/pci1043,8...@5,1/d...@0,0 3. c6t1d0 /p...@0,0/pci1043,8...@5,1/d...@1,0 4. c7t0d0 /p...@0,0/pci1043,8...@5,2/d...@0,0 5. c7t1d0 /p...@0,0/pci1043,8...@5,2/d...@1,0 Specify disk (enter its number): 1 selecting c5t1d0 [disk formatted] Disk not labeled. Label it now? y Warning: error setting drive geometry. Warning: error writing VTOC. Warning: no backup labels Write label failed Running fdisk on a disk that is unavailable will show no partition at all. format> fdisk No fdisk table exists. The default partition for the disk is: a 100% "SOLARIS System" partition Type "y" to accept the default partition, otherwise type "n" to edit the partition table. n Total disk size is 45600 cylinders Cylinder size is 32130 (512 byte) blocks Cylinders Partition StatusType Start End Length% = == = === == === WARNING: no partitions are defined! Doing the same but on the healthy disk. format> fdisk Total disk size is 45600 cylinders Cylinder size is 32130 (512 byte) blocks Cylinders Partition Status TypeStart End Length% = == = === == === 1EFI0 45600 45601100 Looks like the partition information is gone on four of the drives and without it there is no way to set a label? Creating a new partition will erase all information of the disk? -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
Re: [zfs-discuss] zpool wont get back online
Hi Jonas, At first sight it looks like your "unopenable" disks were relabeled with SMI label (hence the cyl count on format's output). Not sure if it is completely safe data wise but you could try to relabel your disks with EFI label (use format -e to access label choice). F. On 10/18/09 20:47, Jonas Nordin wrote: hi, After a shutdown my zpool wont go online again, zpool status showed that only one of five hard drives is online. I tried to export the pool and get it back in hope of a fix but with no change. I have replaced the sata cables and even replaced the motherboard but it's always showes the same status of the zpool. #zpool import will show pool: tank id: 6529188950165676222 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: tankUNAVAIL insufficient replicas raidz1UNAVAIL insufficient replicas c7t1d0 UNAVAIL cannot open c6t1d0 ONLINE c6t0d0 UNAVAIL cannot open c5t1d0 UNAVAIL cannot open c7t0d0 UNAVAIL cannot open #format shows c5t1d0: configured with capacity of 698.60GB c6t0d0: configured with capacity of 698.60GB c7t0d0: configured with capacity of 698.60GB c7t1d0: configured with capacity of 698.60GB AVAILABLE DISK SELECTIONS: 0. c5t0d0 DEFAULT cyl 30512 alt 2 hd 255 sec 63 /p...@0,0/pci1043,8...@5/d...@0,0 1. c5t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5/d...@1,0 2. c6t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,1/d...@0,0 3. c6t1d0 ATA-WDC WD7500AAKS-0-4G30-698.64GB /p...@0,0/pci1043,8...@5,1/d...@1,0 4. c7t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,2/d...@0,0 5. c7t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,2/d...@1,0 I find the format a bit strange since it lists the capacity of the four missing zpool drives but not the hard drive that is online. Any take on how I can fix this or am I screwed? Jonas -- Francois Napoleoni / Sun Support Engineer mail : francois.napole...@sun.com phone : +33 (0)1 3403 1707 fax : +33 (0)1 3403 1114 ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
[zfs-discuss] zpool wont get back online
hi, After a shutdown my zpool wont go online again, zpool status showed that only one of five hard drives is online. I tried to export the pool and get it back in hope of a fix but with no change. I have replaced the sata cables and even replaced the motherboard but it's always showes the same status of the zpool. #zpool import will show pool: tank id: 6529188950165676222 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: tankUNAVAIL insufficient replicas raidz1UNAVAIL insufficient replicas c7t1d0 UNAVAIL cannot open c6t1d0 ONLINE c6t0d0 UNAVAIL cannot open c5t1d0 UNAVAIL cannot open c7t0d0 UNAVAIL cannot open #format shows c5t1d0: configured with capacity of 698.60GB c6t0d0: configured with capacity of 698.60GB c7t0d0: configured with capacity of 698.60GB c7t1d0: configured with capacity of 698.60GB AVAILABLE DISK SELECTIONS: 0. c5t0d0 DEFAULT cyl 30512 alt 2 hd 255 sec 63 /p...@0,0/pci1043,8...@5/d...@0,0 1. c5t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5/d...@1,0 2. c6t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,1/d...@0,0 3. c6t1d0 ATA-WDC WD7500AAKS-0-4G30-698.64GB /p...@0,0/pci1043,8...@5,1/d...@1,0 4. c7t0d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,2/d...@0,0 5. c7t1d0 ATA-WDCWD7500AAKS-0-4G30 cyl 45598 alt 2 hd 255 sec 126 /p...@0,0/pci1043,8...@5,2/d...@1,0 I find the format a bit strange since it lists the capacity of the four missing zpool drives but not the hard drive that is online. Any take on how I can fix this or am I screwed? Jonas -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
[zfs-discuss] zpool wont get back online
hi, After a shutdown my zpool wont go online again, zpool status showed that only one of five hard drives is online. I tried to export the pool and get it back in hope of a fix but with no change. I have replaced the sata cables and even replaced the motherboard but it's always showes the same status of the zpool. #zpool import will show pool: tank id: 6529188950165676222 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: tankUNAVAIL insufficient replicas raidz1UNAVAIL insufficient replicas c7t1d0 UNAVAIL cannot open c6t1d0 ONLINE c6t0d0 UNAVAIL cannot open c5t1d0 UNAVAIL cannot open c7t0d0 UNAVAIL cannot open #format shows c5t1d0: configured with capacity of 698.60GB c6t0d0: configured with capacity of 698.60GB c7t0d0: configured with capacity of 698.60GB c7t1d0: configured with capacity of 698.60GB AVAILABLE DISK SELECTIONS: 0. c5t0d0 /p...@0,0/pci1043,8...@5/d...@0,0 1. c5t1d0 /p...@0,0/pci1043,8...@5/d...@1,0 2. c6t0d0 /p...@0,0/pci1043,8...@5,1/d...@0,0 3. c6t1d0 /p...@0,0/pci1043,8...@5,1/d...@1,0 4. c7t0d0 /p...@0,0/pci1043,8...@5,2/d...@0,0 5. c7t1d0 /p...@0,0/pci1043,8...@5,2/d...@1,0 I find the format a bit strange since it lists the capacity of the four missing zpool drives but not the hard drive that is online. Any take on how I can fix this or am I screwed? Jonas -- This message posted from opensolaris.org ___ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
