I do not have the same problem but it is simpler. Since we have data stay
on our disk pool, reclaim is slow. So we run a process that looks for
offsite tapes that have a low fill amount (less than 10%) and do a move data
on them. After the process sees the move data process end it check the
We do(or did..Someone else handles most of the server issues) have a PMR
open on this issue. No results as of yet. It is so sporadic it is hard to
track.
I must say it hasn't happened in a while.
-Original Message-
From: Remco Post [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 14,
we recover our systems in dr via our backup storage pools obviously... Our
backup storage pool is not collocated.. So the data is spread across more
tapes. Now is there a report I can run like a select statement which will
tell met how many tapes I would need during a point in time recovery
I have a W2K box that has been backing up just fine for months. Nothing
has changed except the addition of service pack 4 in just as long.
However, when ever I run a backup the client backs up every single file
even though it's executing an incremental. As a test we event manually
did an incr on
Normally, you would use private' to check in an offsite vol with data on
it.
[EMAIL PROTECTED] 08/13/03 06:49PM
Hi there,
A generic question. I cannot find a satisfactory answer from the
manuals.
Under what circumstances do we want to check in a newly labelled tape
with
status=private ? Do we
From: Niklas Lundstrom
It is still in beta...
Download it from
ftp://service.boulder.ibm.com/storage/tivoli-storage-management/techprev
/tsmopreport/latest/
This information is incorrect. The TSM operational reporting tool has
been publicly released (although the designation still says beta).
Hi everybody!
We are going to purchase a LTO Ultrium Ultrascalable tape library 3584 model
L32, but I don't know yet how many drives we need for running TDP for R/3 (Oracle)
on IBM 6M1 RS/600 in under 4 hours.
There are 8 CPU's (750 Mhz) with memoria real = 10 GB. The
Arnaud,
Depending upon how much you want the files on this volume back, it *is*
possible, but not using any cosy commands like restore volume etc.
As TSM only deletes references from the database and not the actual data
from the tapes, providing you haven't overwritten the data yet on the
volume
Hi there,
I found the answer to my problem ... from the latest patch README
The Media Labeling wizard of the TSM Management Console for Windows does not
support the labeling of tapes in non-IBM LTO devices. The TSM LABEL
LIBVOLUME
command should be used to label tapes in such devices.
I'm looking through the 5.2 disks and I see no mention of the reporting
tool people have discussed recently
Morning All TSMers :)
and I will be free to start running some movedata commands to start
consolidating tapes (using the new higher compression).
...
3590H upgrading is fully covered in the server README file.
I must apologise for being a bit thick here, but exactly which README is
this. I can
From: Debi Randolph [mailto:[EMAIL PROTECTED]
We Received this same error on 3 Domino servers last night.
The Server Support group checked the servers and say they do
not have the virus.
However, the RPC service died at 11:00 am yesterday, for
unknown reasons.
(Actually it stopped at
I know this was in the 4.1.5.0 README for the 3590E drive conversion, and
in the 5.1.6.0 readme for the 3590H upgrade. It may appear in others as
well.
I believe I have a copy if you have trouble finding it; contact me
directly if you want me to send it over.
Regards,
-Lloyd
On Thu, 14 Aug
That can be like the conclusion of an operation where the surgeon
cannot
account for a sponge or tool. It's best to check for the tape being
stuck in a drive, dropped inside the library, or other expeditionary
search.
Oh believe me, we're doing an exhausive search. I just want to know
what the
Windows 2000 server -- B/A client 5.1.5.9 (occurs on other levels too)
TSM server - AIX 5.1 - Server code 5.1.6.2
This, ironically started happening at the same time as the latest MS worm
outbreak. Has anyone else experienced this??
Regards,
Matt
08/12/2003 22:11:31 ANS1183E An unknown
Hmm,
I played around between TSM server and an test file server,
both NT2000,
TSM server beeing in a workgroup
and test file server beeing in a domain.
I defined very same local users on both,
plan NET USE Z: ...
from TSM server to test file server works, no password input necessary (same
Imre, Allan,
thanks for the quick reply, but:
Allan Hansen wrote:
Hi Tobias,
Don't use the drive letter. It will work with the server name of the
remote machine.
e.g.:
define devclass remoteshare devtype=file dir=\\servername\tsmbackups
tsm: CMS2_SERVER1define devclass remoteshare
Whoops
As I said before, switching management classes is not the correct
solution. Remember, when you change a management class
Forgot to complete my thought
When you change a management class, the next time the file is backed up,
*all* versions of that file will now be bound by the
All right, this approach was discussed many times on this list with only
one exception - you are the first one willing to do it on separate
instance. What others do: 1 node for backups and 1 or more nodes for
different archival requirements (each node can belong to different policy
domain), both
Hi TSM-ers,
I have a new AIX 5.1 box with HACMP and TSM 5.1.6.0.
When I try to start DSMC -optfile=/home/tivoli/tsm/dsm.opt for a cluster
group I get the following message:
10.08.2003 17:09:03 ANS1478E CLUSTERNODE is set to YES but the cluster
software is not available
on this system.
I'm not
I am watching a computer sit idle waiting for the TSM server to do something
with the restore session open. After selecting files and clicking restore it
has been 15 minutes and nothing has happened. I know it needs to mount a
tape yet I see no drives in reserved status. Nor does a q sess f=d show
hi all,
I would like to create a devclass of devtype=file on a windows 2000
server (w2k) running tsm5.1.0.0 using as dir-path a mounted share of
another machine. So what I do is I mount the share of the other machine,
using the gui-analogon to net use (sorry, German OS here, don,t know
the
Hi Joni!
I dont know if this is the best way to do it.
I have create a script who delete the filespace (del filespace nodename *)
And after that I delete the node.
Maybe that is not the right way to do it.
But its works all the time. :)
/Christian Svensson
-Ursprungligt meddelande-
Oh believe me, we're doing an exhausive search. I just want to know
what the damages are if we can't find it. The good news is all the data
is in the offsite pool. The bad news is that it would take 65
non-collocated tapes to recover this one collocated tape!
David - One of those handy
Is there space in the filesystem? The MAXCAPACITY of the device class...is
there that much space available?
Bill Boyer
DSS, Inc.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Salak Juraj
Sent: Wednesday, August 06, 2003 5:30 AM
To: [EMAIL PROTECTED]
Why do you have stay on server version 4.2 because of Novell? I backed up
my 4.11 Novell servers to a 5.1 server with no problems.
I know when I had my DR test last year with 4.1 on AIX I had to change my
devconfig to a manual library to restore the DB...
--
From: Julius Loman [mailto:[EMAIL PROTECTED]
have you done something like this before ? I'd like to ask if it's
possible to use drives on other TSM server (for example TSM2), that is
used only to manage this single manual drive. Main tsm server (for
example TSM1) should use this drive for
Many comments:
1. Multi-gigabyte backup needs time to be created on that file. Afterwards
you need to backup the file using the backup product (be it TSM or not).
Hope you are not adding to the sum backup to diskpool and migration to
tape.
Use TDP for SQL as already suggested. It is not that
I had my first experience with 5.2 client code a few weeks ago. We had
initially manually selected to install the open file module (among others)
when we installed the client on a WinXP machine. I received the same
errors you listed. After much trial and error, we had ran the setup
again, chose
I've seen this same symptom Debi. I only have two or three tapes in the copy
dir pool but when I tried to reclaim one it took all day to finish. Maybe it
has something to do with the number of files on the tape??? I know it's not
a whole lot of data in megabytes...
Mark
-Original
So, TSM is able to break up a single file and back up the file in parallel?
Thanks,
yi
[EMAIL PROTECTED] 08/07/03 03:19PM
Look out for the network speed on this! 100 Mb is 15 GB/hr. 1 GB is 50
GB/hr. So, if you get 4 sessions going (4 nics on TSM) you could crank 200
GB/hr on the 1 Gb
Hmm,
I played around between TSM server and an test file server,
both NT2000,
TSM server beeing in a workgroup
and test file server beeing in a domain.
I defined same local users on both,
NET USE from TSM server to test file server works, no password input
necessary (same passwords).
But
hi
have you done something like this before ? I'd like to ask if it's
possible to use drives on other TSM server (for example TSM2), that is
used only to manage this single manual drive. Main tsm server (for
example TSM1) should use this drive for backups.
Is it possible to define this drive
Hi All,
I've seen some stuff I don't understand with a reclaim stg command and I'd like anyone
who does understand to enlighten me.
TSM server is 4.2.3.3 on AIX 5.1 RML03 running in a p690 LPAR. All disk is FC
attached to IBM ESS arrays, disk stgpools are not mirrored but DB and log are
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/
and this is an alias to good old service.boulder.ibm.com
Zlatko Krastev
IT Consultant
Christian Svensson [EMAIL PROTECTED]
Sent by: ADSM: Dist Stor Manager [EMAIL PROTECTED]
06.08.2003 11:12
Please respond to ADSM: Dist Stor
Joni,
In order to get the 5.2.0 server and storage agent, you need to purchase
TSM 5.2.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED]
Internet e-mail: [EMAIL PROTECTED]
The only dumb
Hi,
We were hit with the Blaster virus bad last night. We patched everything up
last night and fixed the problem, but I noticed the exact same symptoms on
three workstations (windows 2000 pro) that I was backing up. I chalked it
up to the worm that hit us. It uses the rpc exploit to attack the
Files are backed up onto 3590 tapes using 3494 tape library. I noticed that
there are files onto tapes that should be expired and deleted from the
tapes.
I am running expiration process every day.
Any ideas why the expired files are keep on reside onto tapes?
You leave us at a disadvantage in
Hi,
Check the manual that came with the library:
For windows systems: drive 1-12 = elment 0-11
For unix systems: drive 1-12 = element 257-268
Michael Wheelock
Integris Health of Oklahoma
-Original Message-
From: Bradberry, Kenneth [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 12,
From: Christian Svensson [mailto:[EMAIL PROTECTED]
Has anyone get Windows 2003 ASR working with TSM?
When ASR try to recover my system he asking for a TSM Client CD.
When I create the Client CD it´s never work.
So I wonder. Is there a unique CD that ASR want´s. And which CD is it?
RTF the
So, TSM is able to break up a single file
YES, it is inherent functionality which works without any intervention or
special configuration
and back up the file in parallel?
NO
Tsm will write to a tape untill it is full
and continue on next available tape - so that one file
can be spread over
Hello.
I have a LTO Ultrium Ultrascalable Tape Library 3584 L32 and this library has three
(3) drives LTO Ultrium I (First Generation). Every day the TDP for R/3 (version
3.2.0.8) takes backups online of database's SAP (Oracle) through TSM Server 4.2. This
TSM Server is running on an RS/600
This is what I get when using DRM to restore my database.
My version of TSM is no longer supported, and it works when done from a
base install, but I am having trouble getting it to restore the database
from
a tape.
The library and drive seem to work OK otherwise. And I can't seem to
determine
...
After all that, the reclamation is going at a better rate. I think it is
because the one 1GB disk volume containing all of the directory objects
was just too resource intensive to scan. The 10MB volumes are much faster
to scan through. Personally, it doesn't make sense that a random access
Take a look at the maximum scratch volumes allowed in the DIRFILE storage
pool.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED]
Internet e-mail: [EMAIL PROTECTED]
The only dumb question is
From: Wheelock, Michael D
Check the manual that came with the library:
For windows systems: drive 1-12 = elment 0-11
This information is incorrect. For Windows 2000, the element numbers are
257-268.
--
Mark Stapleton ([EMAIL PROTECTED])
Berbee Information Networks
Office 262.521.5627
Hello Guys,
I have exported a Node onto a tape but it was the wrong node name. So
after doing it correctly onto another tape, I wish to place the
incorrect exported tape back into the scratch pool. Any ideas ??? I
thought it'd be under the update volhist but can't see it.
Thanks
Adrian
AIX 5.1
On Fri, 8 Aug 2003 09:27:24 -0500
Stapleton, Mark [EMAIL PROTECTED] wrote:
From: Remco Post [mailto:[EMAIL PROTECTED]
Is support for 32 bit LinuxPPC planned, It can't be that
hard, once you have
the code running on 4 different types of CPU with Linux, the
5th must be
little more than
Hi,
I have the next error every night...
ANE4993E (session:11103, node:bwnt7) tdp mssqlv2 nt
ACO3002 tdp for microsoft sql server:full backup of database baccambios from
server bwnt7 failed, rc=1914
I have a tsm client 5.1.6.2 and tdp for sql 2.2.1
what can I do?
best regards,
Josi Antonio
Lori Simcox is out of the office from 8/5/03 through 8/8/03. I will
respond to your message when I return on 8/11/03.
From: Michael Swinhoe [mailto:[EMAIL PROTECTED]
I have had the same error with our TSM environment.
The PLM is AIX. And we have 5 * W2K library clients
connected to a LTO.
The problem was that when RSM was enabled they were all picking up the
Library changer, which therefore stopped any
From: Thomas Rupp, Vorarlberger Illwerke AG
I have a new AIX 5.1 box with HACMP and TSM 5.1.6.0.
When I try to start DSMC -optfile=/home/tivoli/tsm/dsm.opt
for a cluster
group I get the following message:
10.08.2003 17:09:03 ANS1478E CLUSTERNODE is set to YES but the cluster
software is
Hi all!
We use two device: IBM 20/40GB DDS4 Internal Tape (FRU: 24P2414) and IBM Tape
Autoloader (P/N: 3607-16X) for testing.
The following is the result:
a.. We can label and backup data into the DDS4 tape cartridge.
b.. We can't label tape cartridge in tape autoloader. It always shows
I know that you can EXPORT NODE, and then IMPORT NODE on the new server. But, if you
do not have the POLICY set up, it has errors. Does anyone know the correct procedure
for moving a client from one server to another?
Jamie Aldrich
Verizon
I have a wintel TSM server version 4.2.3.1 with Windows 2000, and I am
trying to get a
'smooth' DRM run (where I have to do minimal editing of the plan file, and
no major re-configuration
of TSM after it is restored).
One issue I have is the DR server and the production server are not
My motivation was to keep the backup database size small.
We have to archive about 5,000,000 small files off our NT servers every month. I
found that our database size was growing by about 5GB per month as a result. At that
rate I would have had a database that was about 100GB in a year.
I
In the below scenario, I have a NetApp filer that I am backing up the
/vol/widgets volume using image backups via Tivoli TSM NDMP. To keep the
scenario simple, assume the volume is associated with a Backup Copy Group
setting of:
Versions Data Exists: NOLIMIT
Versions Data Deleted: NOLIMIT
Hi to all,
I have the following backup copy groups defined:
Policy Domain NameBWDOMAIN
Policy Set Name BWPOLICYSET_DAILY
Mgmt Class Name BWMGMT
Copy Group Name STANDARD
Versions Data Exists 4
Versions Data Deleted
a simple success story:
I just finished reorganisation of my TSM Server.
I added 3 disks to build new Raid,
I changed location, names, size and count of both database and logfile
volumes
I added redundancy to database and logfile
I completly reorganised all disk storage volumes to optimally use
Is it supposed to take forever and 2 days to reclaim my Copy Dirs pool?
Not for the price of the product...
You haven't told us if you are checking for tape drive contention,
as in drives busy with higher priority tasks.
If no contention, you may have some difficult tapes, consuming costly
Hi all,
I was very pleased to find a TSM client for LinuxPPC 64 bit, usefull (though
not for us). What I'd had hoped for was a version that would run on 32 bit
versions of LinuxPPC as well as on 64bit LinuxPPC, so it would not only run
on IBM hardware, but also on the tons of other LinuxPPC
It may be worth while looking in ~/Library/Logs/CrashReporter/ or
/Library/Logs/CrashReporter/ for dumps, if enabled. To enable, open
the Console app, under preferences check Enable crash reporting.
If nothing else, this info could be valuable to IBM to determine the
cause of the problem.
Also,
Hello,
Once more a question concerning the 'always incremental' backup behaviour of TSM.
I'm examining a TSM setup done by a thirth party and he has done something strange.
He performs a selective full backup in the weekend and the normal incremental backups
during the week. But if a file A
Hi there,
A generic question. I cannot find a satisfactory answer from the manuals.
Under what circumstances do we want to check in a newly labelled tape with
status=private ? Do we have to assign it to a storage pool as a subsequent
step or it's not going to be available?
Hector Chan
From: Coolen, IG (Ilja) [mailto:[EMAIL PROTECTED]
I am not anctious to use a 1TB tape.
Your points are well taken, but 1TB tapes are evolving because of the
need for:
1) high-capacity cartridges for machine image backups and large file
backups
2) long-term archival storage
3) collocated
i am using using tsm with primary disk storage pools (zos 3390's) and secondary
storage pools
3590's
new server i installed has a file that is over 300gb's, changes daily
i have had to exclude the folder that contains the file till i can find
a storage medium that will have enough capacity
well, after upgrading to 5.1 we have this peculiar problem:
a recclamation in one of our libraries fails.
- reclamation starts
- one cartridge is loaded
- get ANR1081W
- process cancels
anyone seen this?
Library Name Drive Name Device Type On-Line
Hi Markus,
The TSM device driver for Windows 2003 is a new device driver and different
from the previous driver for Win2K and NT. It is a plug and play driver and
you won't be able to control it through the TSM MC. You will have to
configure the library through the device manager first. The
Hi,
Sorry but you have deleted the files from the database. In fact, they are
not erased from the the tape so a restore vol won't help.
The only way I know would be to restore an old database backup, you could
do it on another server if you can.
Cordialement
Etienne GUILLAUMONT
e-mail : [EMAIL
...
ANS1028S Internal program error. Please see your service representative.
...
Any ideas what can cause it?
See http://people.bu.edu/rbs/ADSM.QuickFacts for accumulated hinky causes
of many of the problems and error messages we've all experienced.
Richard Sims, BU
About year ago, we started new business. Remote off-site backup. We have server in
internet data center and basically we are renting disk space /month/GB, and storing
customers data off-site.
We tested couple of softwares that are available on market (made for internet backup-
I did power down everything, re-check all the scsi connections,
clean drives again, and go from 'scratch' (roughly 3 hours to
do it). Still got the same errors.
I can run dsmserv restore db todate=today
and it loads the tape, before getting the error.
I am about to swap the two drives we have,
Hi,
I have a couple of small file servers beeing backed up over VPN´s of
128-256k.
All share same business requirement- to be able to restore single files
rapidly,
while restoration of whole server - considered to be rare - may take a
week.
So raising this limits would be of help for me and my
Try your command and specify a source category... -s and if it says
manually ejected that should be FFFA
OH, and if you want to remove it from reference in the library manager...
use target -t FFFB to purge the volume information...
Dwight
Mike Cantrell
Had forgotten about this little bug.
VOLUME_NAME: D00596
STGPOOL_NAME: C1_FS_DRMP
DEVCLASS_NAME: 3590DEVCLASS
EST_CAPACITY_MB: 0.0
PCT_UTILIZED: 0.0
STATUS: EMPTY
ACCESS: OFFSITE
PCT_RECLAIM: 0.0
SCRATCH: Yes
ERROR_STATE: No
NUM_SIDES: 1
From: Jim Kirkman [mailto:[EMAIL PROTECTED]
Selective Backup of the D: drive on a NT4 SP6a machine running TSM
Client 4.1.2.12 with nodename apimage2
Newer machine, W2K SP4 running TSM Client 5.1.5 .
Commandeered nodename
apimage2. Trying to restore the D: drive contents.
TSM uses the
Hello Brion,
Thank u so much for ur kind reply and script.I will
load it in linux systems.If I have any problem
I will contact u.
Thanks
-
Geetha Thanu
CDFD
-
-REPLY TO-
Hi folks,
TSM server 5.1 on AIX 5.1
(This may a little more of an AIX question, but I've lost my TSM database...)
I rebooted my Unix server today and four disks that belong to a volume for my TSM
database, were not in the volume group any more! I know that I can't add them back in
to the VG
Hello all,
I have an error I cannot pin down.
I have set reclaim of LTO to use a storage pool defined in SEQEUNTIAL FILE
device class.
This saves mount points in library and speeds reclamations things up at low
costs,
it is basically a recommendable configuration.
TSM sometimes gets a disk
Hello,
we have TDP 5.1.* from MS SQL Server.
Is this supported on Windows 2K SP3, SP4 and SQL Server 2K SP3a?
Thanks,
yi
Selective Backup of the D: drive on a NT4 SP6a machine running TSM
Client 4.1.2.12 with nodename apimage2
Newer machine, W2K SP4 running TSM Client 5.1.5 . Commandeered nodename
apimage2. Trying to restore the D: drive contents.
TSM uses the System account, and we're logged using a local admin
The restore was initiated from the client with the GUI. At that time only
expiration was running.
It just so happened that about 15 minutes after I clicked the restore
button migration kicked off and finally the restore requested a tape, which
it got right away and the restore finished. Thirty
With the SQL Database set to SIMPLE you can't run a backup of the redologs
(transactionlogs), but only full backups.
If your SQL-dba wants to have log backups he should set the DB recovery mode
to full in the SQL-Enterprise Manager.
(we never backup the Northwind-DB)
Jeroen
-Original
On Mon, 11 Aug 2003 09:56:35 -0400
Lawrence Clark [EMAIL PROTECTED] wrote:
well, after upgrading to 5.1 we have this peculiar problem:
a recclamation in one of our libraries fails.
- reclamation starts
- one cartridge is loaded
- get ANR1081W
- process cancels
anyone seen this?
Library
does anyone have this information for converting from 3590B to the 3590E drives? I
know I am behind the tech curve, but that's life.
Bill
[EMAIL PROTECTED] 08/14/03 09:27AM
and I will be free to start running some movedata commands to start
consolidating tapes (using the new higher
Jeff,
This should not be a problem.
If you are using a different NODENAME for DP for SQL
and the BA client (recommended), they will be maintained
and updated separately.
If you are using the same NODENAME for DP for SQL
and the TSM BA client, the password is stored (and retrieved)
from the same
Are you using the Sp Switch? I had a problem the SP Switch after the AIX 5 upgrade.
Miles
[EMAIL PROTECTED] 14-Aug-03 2:39:02 PM
Michael,
What I understand that your data transfer rate over network went down to
200k after AIX OS upgrade. What is the level of ML you have upgraded ? What
was
-2147220998: Internal error in Windows Installer
The box is WinNT 4.00.1381
Dameon - The error would suggest that your Windows Service Pack level is
too low.
Richard Sims, BU
Hi Etienne,
Thanks for your response ... Not exactly the one I would have liked to read, as we're
in the middle of a migration process from non collocated to collocated stgpools, and
going back to yesterday would be really painfull, as our server is very time
constrained :-(
Thanks anyway.
Ok you guys had to start talking about this and now it has happened to me. Nearly all
my servers in prompt mode didn't take a backup last night. Nothing in the activity
log and nothing in the dsmsched.logs. I'm running server 5.1.6.4 on AIX 5.1 and
clients range from 4.1.2.12 to 5.1.5.15, all
It soudns like if you do a 'netstat -e' from the command line, this could
be the issue if you see lots of errors under the recieve column.
Now how to change it is the next question :)
-Original Message-
From: Debi Randolph [mailto:[EMAIL PROTECTED]
Sent: Thursday, August 14, 2003 10:55
We just upgrade our server version from 4.2.1.7 to 5.1.7.1 on AIX 4.3.3.
We had to upgrade to stay in support.
The client having problems is 3.1.0.8 running on Netware 4.10 (I
understand Netware 4.10 cannot use TSM B/A Clients higher than 3.1.0.8).
I understand B/A 3.x is way out of support.
This
IBM added two extra drives, since I associated them with the zone on the SAN
I have been getting the error below. IBM did have to take slots out of the
library to install the two additional drives. Any ideas on how to resolve
this issue? Thanks. Ken.
ANR8441E Initialization failed for SCSI
Hello,
The result of a back-up schedule looks like this in the actlog:
08/12/03 06:01:52 ANE4952I (Session: 10317, Node: ABC) Total number of
objects inspected: 132,391
08/12/03 06:01:52 ANE4954I (Session: 10317, Node: ABCL) Total number of
objects backed up:1,666
When I query the
From: brian welsh [mailto:[EMAIL PROTECTED]
The result of a back-up schedule looks like this in the actlog:
08/12/03 06:01:52 ANE4952I (Session: 10317, Node: ABC)
Total number of
objects inspected: 132,391
08/12/03 06:01:52 ANE4954I (Session: 10317, Node: ABCL)
Total number of
Hi all,
I have installed TSm client in Redhat linux 8.If I am taking
backup manually evrything goes on well.But I want to
schedule and backup automatically and when I am starting the scheduler
using nohup it runs fine, but is killed when i come out of that window.Pls
help me.
thanks and regds
I've got a collocated offsite copy storage pool and need to get a list of what nodes
are represented on what volumes. The only way I know of is to issue a select
distinct node_name from volumeusage where volume_name=volume but this seems
inelegant and in any case takes a VERY, VERY long time.
Hello,
TSM-server 4.2.2.8 on AIX 5.1
TSM-client 4.2.1.25 on AIX 5.1
Commonstore version 8.0
SAP version 4.6c
We install, configure and so on Commonstore on the TSM-client system. We set
up the necessary policy on the TSM-server. Set up the SAP-part. So far so
good. But when we activate
Hello group,
I am posting this by request of IBM Tivoli Worldwide Education. Please
direct any questions to the contact provided in the information below.
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL
Patricia,
Take a look at your dsm.opt file for the TDP job and make sure you have the
TCPCLIENTPORT set to a different port number than the TCPCLIENTPORT in the
dsm.opt file for the Backup/Archive client jobs. I had the same problem
until I specified a separate port. Also, is it set for server
1 - 100 of 248 matches
Mail list logo