John,
This is normal.
SQL Server is pre-formatting the files in preparation for the restore.
Data Protection for SQL restores a small bit of information that
the SQL Server requires to properly set up and preformat the files.
After that, Data Protection for SQL must wait around until the
SQL Serve
The delay is that with large DB's, you have to wait for the DB file to be
recreated on disk before it can be restored from backup.
With only say a 1 GB file, it's hardly noticeable.
They has been some occasional discussion about this.
David B. Longo
System Administrator
Health First, Inc.
3300 F
One of my users is trying to restore a 22 gig MSSQL database using TDP
v5.2.1. The entire restore is taking several hours from start to finish and
I have no idea why. I've watched the process and once it mounts the tape
(the whole DB fits on 1 tape) ,it just sits for usually hours and appears
to do
Timothy,
If you're not going to use the dsmcad for scheduling (which I would
recommend) then you have to have the dsmc sched nlm loaded.
To use the cad you need the line managedservices webclient schedule.
Here's an example of our opt file for a cluster node:
Check this out
http://www-1.ibm.com/servers/aix/whitepapers/db_perf_aix.pdf
Charlie Hurtubise
Tecsys Inc.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Thach, Kevin G
Sent: Wednesday, June 30, 2004 1:44 PM
To: [EMAIL PROTECTED]
Subject: Re: raw
If possible, I would be interested in obtaining a copy of the pdf document you refer
to. Thanks!
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Stef Coene
Sent: Wednesday, June 30, 2004 12:52 PM
To: [EMAIL PROTECTED]
Subject: Re: raw partitions
Anybody knows password on 5.2 Win2K3?
- Original Message -
From: "Otto Schakenbos" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 30, 2004 12:34 PM
Subject: Re: admin password on 5.2
> try to shutdown the tsmserver (sending a kill signal should do the trick
> or stop th
Questions:
1). Are the dsmsrv.opt compatible across 5.1 to a 5.2 TSM release
2). Will the upgradedb auto-invoke when I attempt to bring up the 5.2 server pointing
to the old 5.1 database
3). If not, where is it.upgradedb is not found on the server. Would it be
explicitly invoked prior to brin
try to shutdown the tsmserver (sending a kill signal should do the trick
or stop the service for windows)
then start the tsm server in console mode, this means get on a command
prompt and execute the dsmserv(.exe) This will give you an almost
standard dsmadmc prompt, now add/set an administrator,
it took 4 ddigits with f letters for the new password...
>>> [EMAIL PROTECTED] 06/30/2004 12:40:41 PM >>>
Check the minimum password length that was set on your TSM server
(query
status will show a minimum password length field).
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Sto
Hello David,
this is a known defect, described by apar IC39306.
This apar will be fixed in the 5.2.3.0 level of the server to be available
very shortly.
Rejean Larivee
IBM Tivoli Storage Manager support
**
hmmm.since I can't do a dsmadmc I don't know how I might do a q
status.
I don't see the parm in the dsmserv.opt
>>> [EMAIL PROTECTED] 06/30/2004 12:40:41 PM >>>
Check the minimum password length that was set on your TSM server
(query
status will show a minimum password length field).
Reg
I just last week upgraded TSM Server to 5.2.2.5 from 4.2.3.4 on AIX.
I just ran a DEL FILESPACE. While it was running it showed 0 objects
deleted and when it ended the actlog showed successful, but still
showed 0 objects deleted. It obviously did delete as the filespaces
didn't exist anymore and
On Tuesday 29 June 2004 20:33, [EMAIL PROTECTED] wrote:
> ==> In article <[EMAIL PROTECTED]>, Joni Moyer
<[EMAIL PROTECTED]> writes:
> > Hello all!
> >
> > I was reading the performance tuning guide and it states that we should
> > use raw partitions for server db, log and disk storage pool volume
Check the minimum password length that was set on your TSM server (query
status will show a minimum password length field).
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED]
Internet e-mail: [EMA
Do a "q script fsnobackup'. I think that might be a TSM supplied script
that does what you want. Matter of fact, do a "q script" and get
familar with the supplied scripts. Some of them are quite useful and
others serve as a good starting point for writing your own queries.
David
>>> [EMAIL PRO
Hallo Moses,
I although have to make a daily and a monthly backup on the server with
different retention periods.
I solve the problem by creating to policy domains dayly_pd and monthly_pd
where are different management classes.
On the node I use two different nodes _day and _mon
which are backed u
Trying to log onto a 5.2 installation. Get:
Enter your user id: admin
Enter your password:
Your password has expired.
Enter your password:
Please enter a new password:
Enter new password for verification:
ANS1262E Password is not updated. Either an invalid current password
was supplie
d or t
Hi,
We have several netapp filers in our environment. Because NDMP in
general (and specifically in the case of TSM) is lacking we use a
slightly different configuration. For each filer, we have an anti-virus
server that runs the off box mcafee solution for netapp. These also
double as the backu
I downloaded these products (with Passport Advantage site):
IBM Tivoli Storage Manager for SANS Managed Systems for SAN on UNIX V5.2.2,
Multi-Language (C566MML)
IBM Tivoli Storage Manager for SANS Managed Systems for SAN on Windows V5.2.2,
Multi-Language (C566LML)
Jeroen
-Original Messa
Hallo,
I use
select node_name,filespace_name,backup_end from filespaces where cast
((current_timestamp-backup_end)days as decimal(3,0))>3
mit freundlichen Grüßen
Ralf Behrendt
WGZ-Bank
Organisation und Betrieb
- IT-Systeme -
Ludwig-Erhard-Alle 20
D - 40227 Düsseldorf
Telefon: +49 211 778 39
Hello Bonnie,
If you delete your library, ITSM will delete the library inventory for you. So the
answer to you question is No, do not use checkout libv. It will only slow things down.
Regards,
Karel
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Ar
Hi, Bill
I met some problem about online restoring the DB2 database:
When I use command line to restore the database, the error is:
db2 => rollforward database hjy218 to end of logs and
stop SQL0956C Not enough storage is available in the
database heap to process the statement. SQLSTATE=5
Hi Chris,
the license file is 'mgsyssan.lic'.
Good luck,
Rainer
Christoph Pilgram
<[EMAIL PROTECTED] An: [EMAIL PROTECTED]
ELHEIM.COM> Kopie:
Gesendet von: "AD
Hi, Gurus,
.
TSM 5.2.2.5 windows 2003. But cannot login on web interface admin. It used to be admin
and admin.
but now no response. Is it Windows 2003 Security issue?
And in device configuration the tape library and drives are on same level, drives are
not under Tape library.
Any information
Hi,
there is a bug when you install a cluster service sched , you have to open the
GUI and reenter the password.
When we install a new cluster schedule we map the aktiv node cluster disk to
the inactiv node using the same drive letter.
This way we can use the same opt and path to the opt to insta
Hi all,
Can anybody tell me which product I have to licence, if I want to use
lanfree-Backup TSM5.2 on Unix and W2K-clients . My server is on AIX.
I can't see a product on the IBM-website, I only find the Storage Agent
Books.
Thanks a lot
Chris
-Ursprüngliche Nachricht-
Von: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Im Auftrag von Martin Krauß
Gesendet: Mittwoch, 30. Juni 2004 15:35
An: [EMAIL PROTECTED]
Betreff: Problem with TSM Client in a WIN2000 Cluster Environment
Hello everyone,
We have some problems with our TSM
Hello everyone,
We have some problems with our TSM scheduler service in a Windows 2000
Cluster Environment.
There are two cluster nodes in the cluster, and from each cluster node
we try to backup our data from the corresponding cluster-hard disks to a
remote TSM-server.
So cluster node A backs u
Hello everybody
I have a TSM client (version 4.2.1) running on AIX 4.3.3. I have two errors
situation (distinct, I think) on this client.
Situation 1:
When I make a "q node" I receive the following message:
I already change the node name and re-install the client with a new name.
tsm> q node
Pl
Hi,
First, try to avoid select statements against backup table since it take
some time to run... (and nobody mentioned it...)
Second, look at http://people.bu.edu/rbs/ADSM.QuickFacts, there are alot of
SQL links at the end.
Third, try select node_name, filespace_name, substr(cast(backup_end as
ch
Hello Karel,
Thank-you so much for your explanation...that really helped me to understand
why I
needed to check the tapes back in. I was hoping to just open the library
door and
remove them from the old library, but would you recommend that I use a
checkout
command to do this?
Thank-you,
Bonnie
Hello,
We are still working on our Novell TSM Cluster, We keep
getting the following message in the server log. while trying to
backup the Domain Novl3 on the Cluster at midnight.
(ANR2716E Schedule prompter was not able to contact client
DOCCS1USRS using type 1 (10.xx.xx.
"Karin Dambacher" <[EMAIL PROTECTED]>
>you can use the sample script FSNOBACKUP. Start it with "run
>fsnobackup 3"
>(3 = 3 days since they have not been completed).
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Moses Show
>Where can I locate this sample script
Read your
Hi,
in the web admin look at "object view - automation - server command
scripts". If this list is empty, you have to load the sample scripts with
"dsmserv runfile ..xyz\scripts.smp" where xyz is the server directory.
If the list is not empty, FSNOBACK is defined (you can see it in the list)
and yo
Where can I locate this sample script
"Karin Dambacher" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
30/06/2004 13:21
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Antwort: Re: Using select statements
Hi,
Hi,
you can use the sample script FSNOBACKUP. Start it with "run fsnobackup 3"
(3 = 3 days since they have not been completed).
Best regards, Karin
mailto:[EMAIL PROTECTED]
http://www.emprise.de/enc
Ein Unternehmen der EMPRISE Gruppe
Diese e-Mail einschließlich ihrer Anhänge ist vertraulich. W
Hi,
I forgot to include the select statement that I have written. It takes the
following form.
"select node_name, filespace_name, date(backup_date) from backups where
((days(backup_date) - days(current_date))) >=-3"
==
Thi
Hallo,
I did every day.
1. checkin libv IBM3570COPY search=yes,checkl=b stat=scr
2. checkin libv IBM3570COPY search=yes,checkl=b stat=pri
If you monitor it you see that there are the scratch Tape checked in with
the error message that it couldn't checkin the privat tape as Scratch
Tapes.
Then you
Hi everyone I need some help.
Was told by a colleague that you can run queries using SQL select
statements to obtain information regarding a TSM server.
I am trying to compose a select statement to display filespaces on the
server which have not been backed up in the last three days. Howeve
Hi all,
I have to implement TDP for Oracle at one our customer location right from
TSM.The oracle DB is 8.1.7 on windows NT 4.0. TSM version 5.2.0.0 on
windows 2000. RMAN is not used for backup now.
My problem is the customer is not willing to provide me with a
separate machine for RMAN recovery
Hi,
I have a potential customer who would like to backup his NetApp filer to
TSM. Now I just learned that NDMP allows for backups of the NetApp via
the LAN to a backup server with 'local attached' tapedrives.
Unfortunately, it seems this is not supported with TSM. Does anybody
know if this is in t
42 matches
Mail list logo