Hi,
Maybe if you restore the vm with a new name...
Before check these values for your backup
select * from summary_extended where sub_entity=''
De :"McWilliams, Eric"
A : ADSM-L@VM.MARIST.EDU,
Date : 2015-03-23 16:39
Objet : [ADSM-L] Restore error message
E
I haven't received any replies so I thought I would re-post.
Please forgive me if you've see the post already.
Is there any way to recover from this error? I'm trying to restore a full vm.
I deleted the vm but before I could get the tape back to do a restore someone
created a new vm with the
Hi everyone,
today I installed TDP for Exchange on an Exchange 2013 server with a single
database, no DAGs. The backup went OK and the restore went OK too. Problem
now is, after telling the restore assistant to close and delete the
Recovery Database, the "MSExchange Mailbox Replication" service is
s you encountered, but
it sounds closest to the issue you initially reported (the RC 12 with no
other error message).
Regards,
- Andy
Andrew Raibeck | Tivoli Storage Manager Level 3 Technical Lead |
stor...@us.ibm.com
IBM T
hard limit of about
4 GB before running another backup with tracing. For some reason I only got
half the requested limit. The backup failed, but produced a useful error
message for the first time in the history of this problem: an ANS1225E message
indicating that the client software was unable to
te: 2014-07-10 12:47
> Subject: Re: Backup fails with no error message
> Sent by: "ADSM: Dist Stor Manager"
>
> The error log entries for each day usually include a few messages about
> files not found or files that changed while TSM was reading them. There
> is a warning
July 8 and the failed backup on July 9
Thomas Denier
Thomas Jefferson University Hospital
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of An=
drew Raibeck
Sent: Wednesday, July 09, 2014 10:44 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Backu
he highest severity prevails,
so if, for example, an ANSW (RC 8) and ANSE (RC 12) are issued,
then the RC will be 12. We have had the odd "skipped file" message that is
not setting the RC to 4, but those have been fixed via APARs, and in any
case I would still expect some error messag
The regularly scheduled backup ran successfully on Tuesday morning.
The scheduled backup this morning failed with exit status 12 and no
error message. The backup start and end times indicated that the
failure occurred while processing a different file system in the same
resource group.
I ran a
10:18 AM
>
> Subject:
>
> Re: Backup fails with no error message
>
> Sent by:
>
> "ADSM: Dist Stor Manager"
>
> Andy,
>
> The failure did not occur when I ran the backup with service
> tracing. Further testing
> revealed that the failure no longer
homas Jefferson University Hospital
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Andrew
Raibeck
Sent: Monday, July 07, 2014 4:19 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Backup fails with no error message
Thomas,
Run the failing backup co
ge/Home
"ADSM: Dist Stor Manager" wrote on 2014-07-07
15:59:57:
> From: Thomas Denier
> To: ADSM-L@vm.marist.edu,
> Date: 2014-07-07 16:00
> Subject: Backup fails with no error message
> Sent by: "ADSM: Dist Stor Manager"
>
> We have an AIX system on whic
We have an AIX system on which backups of a specific file system terminate with
exit status 12 but with no error message indicating a reason for this exit
status.
If I execute the command
dsmc inc /main/UT -servername=DC1P1_MAIN
as root, I will see typical messages about the number of files
Gary
Problems relating to that specific file are documented here:
http://www-01.ibm.com/support/docview.wss?uid=swg1IC79284
Seemingly it was a problem that Microsoft introduced in SP1 for Windows
2008 R2 and can be ignored.
Regards
Neil Schofield
Technical Leader
Yorkshire Water Services Ltd.
vironments.
(would have been nice if they had given me a heads up on that...)
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Richard Sims
Sent: Wednesday, April 04, 2012 2:32 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Another queer err
Gary - You probably have some Internet miscreant going at your client port with
non-TSM software. Windows boxes tend to be honeypots without trying. Various
systems at your site may evidence such probing, in their logs. Given that you
are at a recent TSM level, it should not be the case of mo
Tsm client 6.2.3 and 6.2.4 both win 2008.
Receiving messages
04/04/2012 14:42:49 ANS0361I DIAG: sessRecvVerb(): Invalid verb received.
04/04/2012 14:42:49 ANS0361I DIAG: sessRecvVerb(): length=4745, verb=54,magic=20
04/04/2012 14:42:50 ANS0361I DIAG: sessRecvVerb(): Invalid verb received.
04/04/2
DSM-L@VM.MARIST.EDU
To
ADSM-L@VM.MARIST.EDU
cc
Subject
[ADSM-L] Cryptic tsm error message, not sure what to do with it.
Tsm client 6.2.4 on windows 2008.
Tsm server 5.5.4.
Receive the following for each nightly backup.
04/03/2012 21:26:43 ANS1417W Protected system state file
'\\?\GLOBALR
Hi,
this message is documented for 6.3:
http://publib.boulder.ibm.com/infocenter/tsminfo/v6r3/index.jsp?topic=%2Fcom.ibm.itsm.msgs.client.doc%2Fmsgs_client553.html
but I couldn't find it in the 6.2 infocenter.
- Rainer
ProteoSys AG
C
Tsm client 6.2.4 on windows 2008.
Tsm server 5.5.4.
Receive the following for each nightly backup.
04/03/2012 21:26:43 ANS1417W Protected system state file
'\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy25\Windows\System32\iscsilog.dll'
is backed up
to the drive file space, not system state fil
On Jun 26, 2009, at 10:09 AM, David W Daniels/AC/VCU wrote:
Has anyone received this error before? If so, what is/was the fix.
Note
the windows tech rebooted the machine several times and still got this
error. Note user is using TSM client 6.1
The List archives chronicle what we've encountere
Has anyone received this error before? If so, what is/was the fix. Note
the windows tech rebooted the machine several times and still got this
error. Note user is using TSM client 6.1
** Don't be a phishing victim - VCU and other reputable organizations will
never use email to request that you r
Joni,
I made a mistake, yours is Window 2000. You can try submitting a PMR
to ask for support. Richard Sim pointed this out for me. Thanks Richard.
"Windows NT 5.0" (WinNT 5.0)The actual, official
designation of
Windows 2000, as shows up
8 20:08:49 ANS1802E Incremental backup of 'System Volume'
finished with 8192 failure
01/06/2008 20:08:49 ANS1802E Incremental backup of 'System Volume'
finished with 8192 failure
01/06/2008 20:13:12 ANS1512E Scheduled event 'WINDOWS-DAILY-INCR1' failed.
Return code =
****
Joni Moyer
Highmark
Storage Systems, Storage Mngt Analyst III
Phone Number: (717)302-9966
Fax: (717) 302-9826
[EMAIL PROTECTED]
"Avy Wong" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
01/07/2008 09:5
Manager"
<[EMAIL PROTECTED] Subject
.EDU> Re: [ADSM-L] failed 12 error
message
01/07/2008 09:46
AM
Please respond to
"ADSM: Dist S
e enemy of excellence.
"ADSM: Dist Stor Manager" wrote on 01/07/2008
07:23:05 AM:
> Hello everyone,
>
> I was just wondering if anyone would happen to know what the failed 12
> error message means? And where can I find more information on why the
> client failed w
We see these, as well. You need to check the dsmerror/dsmsched.log files
on the client. That is how I was able to determine the error message
associated with the rc=12 and resolved the problem.
Joni Moyer <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
01/07/2008
Hello everyone,
I was just wondering if anyone would happen to know what the failed 12
error message means? And where can I find more information on why the
client failed with this error?
Scheduled Start Actual Start Schedule Name Node
Name Status
Orin,
I'm afraid that's not enough details to provide real help...
Did you check the incl/excl list?
Is there a domain-statement to backup a filesystem that is not a
mountpoint (-> use virtualmountpoint)?
Regards,
Michael
Am 18.12.2007 um 18:47 schrieb Orin Rehorst:
Tried to back up 100 GB
Tried to back up 100 GB file on AIX box.
TSM server is Windows, TSM 5.3.2.
No error in TSM activity log, non on AIX box either.
Please advise.
Regards,
Orin
Orin Rehorst
Read this topic:
http://publib.boulder.ibm.com/infocenter/tivihelp/v1r1/index.jsp?topic=/com.ibm.itsmfdt.doc/ans6103.htm
Can you post dsm.opt after.
+--
|This was sent by [EMAIL PROTECTED] via Backup Central.
|Forward SPAM to
Hello All!
Recently we upgraded TSM agent on Win2003 servers to version 5.4.1.0.
On lot's of servers were we've installed online image support & open file
support we get an ntfs error in the system event log:
"
The file system structure on the disk is corrupt and unusable. Please run the
c
Hi John! Google produces the same question, but no answers. Which server is
it? - Margaret
>>> [EMAIL PROTECTED] 5/2/2007 8:41 AM >>>
Has anyone seen this message before. It started showing up multiple times in
the dsmerror.log.
(TSAFS.NLM 6.51.5 291) An invalid path was used.
Thanks
Has anyone seen this message before. It started showing up multiple times in
the dsmerror.log.
(TSAFS.NLM 6.51.5 291) An invalid path was used.
Thanks
John Bortscheller
Network Administrator
San Diego Data Processing Corporation
(858) 581-9718
[EMAIL PROTECTED]
BEGIN:VCARD
VERSION:2.1
X
offline, I get this error message:
>
> Backup of SQL Database RefTables will not be attempted.
> SQL Database Status: StatusError768
> ACO5422E Received the following from the MS SQL server:
> [Microsoft][ODBC SQL Server Driver][SQL Server]Database 'RefTables'
> cannot be
Mark -
See past pursuits of this issue, as in:
http://www.mail-archive.com/adsm-l@vm.marist.edu/msg62440.html
Richard Sims
case.
:)
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Mark
Stapleton
Sent: Friday, March 23, 2007 9:10 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Spurious error message with TSM for Databases (SQL)
When I use the SQL agent (version 5.3.3.0) to
When I use the SQL agent (version 5.3.3.0) to back up SQL2000 databases on a
Windows 2000 server, and the SQL machine has one or more databases offline, I
get this error message:
Backup of SQL Database RefTables will not be attempted.
SQL Database Status: StatusError768
ACO5422E Received the
All fixed, thanks
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Del Hoobler
Sent: Thursday, January 04, 2007 8:53 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] SQL TDP error message
David,
Go to:
http://www.ibm.com/us/
and search
David,
Go to:
http://www.ibm.com/us/
and search for:
ACO5423E
You will find your answer.
Bascially, it says you need to obtain Data Protection for SQL 5.2.1.03
or later for SQL Server 2005 support.
Thanks,
Del
"ADSM: Dis
TECTED] On Behalf Of
Tyree, David
Sent: Thursday, January 04, 2007 8:38 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] SQL TDP error message
TSM server running 5.3.2 on a Win2k box.
We have put in a new server in running Windows 2003R2
Standard Edition and S
TSM server running 5.3.2 on a Win2k box.
We have put in a new server in running Windows 2003R2
Standard Edition and SQL 2005. I installed TSM client 5.3.2 and got it
configured with no problem.
I then installed the TDP for SQL 5.2.1.0.
Hi to all
Just install on a test machine Windows Vista + Office 2007 …. When trying to
connect the clients via the browser (now is IE7) I got this following message
error:
Runtime error!
Program: C:\Program Files\Internet Explorer\iexplore.exe
Abnormal program termination
I know it’
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Greg Yuzik
>I am in the process of updating my WIN2K3 clients to 5.3.4.8 (in
>accordance to the recent critical alert TSM announced a couple days ago
>APAR IC50347), and I am receiving an error message that I cannot seem
ng,
>
>
>
> I am in the process of updating my WIN2K3 clients to 5.3.4.8 (in
> accordance to the recent critical alert TSM announced a couple days ago
> APAR IC50347), and I am receiving an error message that I cannot seem to
> find any answers to.
>
>
>
> After upda
Good morning,
I am in the process of updating my WIN2K3 clients to 5.3.4.8 (in
accordance to the recent critical alert TSM announced a couple days ago
APAR IC50347), and I am receiving an error message that I cannot seem to
find any answers to.
After updating my client node, I start the
ANR8984E error message
On Oct 24, 2006, at 2:00 PM, James Choate wrote:
> We are receiving the following ANR message from TSM.
>
> I can't find any references to the message in the messages and
> problems guide. Nor the IBM web site. I even tried google :( with no
> respon
On Oct 24, 2006, at 2:00 PM, James Choate wrote:
We are receiving the following ANR message from TSM.
I can't find any references to the message in the messages and
problems
guide. Nor the IBM web site. I even tried google :( with no
responses.
James - Try the most intrinsic approach: he
109
Cell: 952-221-6938
http://www.computechresources.com
http://us.logicalis.com
James Choate <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager"
10/24/2006 01:00 PM
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Subject
ANR8984E error mess
We are receiving the following ANR message from TSM.
I can't find any references to the message in the messages and problems
guide. Nor the IBM web site. I even tried google :( with no responses.
We get the message when we turn on migration from our disk storage pool
to our newly defined 3592
On Sep 18, 2006, at 1:20 AM, Reeves, Damion wrote:
...
09/18/06 11:28:50 ANS0236E On dsmInit, the owner is not allowed to
establish a session when PASSWORDACCESS=generate.
...
That message tells me that your TDPO is misconfigured. I would
advise completely reviewing your TDPO client options
Hi All,
I was wondering if someone could assist with the following.
We have installed and configured TDPO 5.3.2 (32-bit) and TDPO 5.3.2
(64-bit) on the same Sun Solaris SPARC 5.8 system.
I have successfully completed a backup and restore to SCSI TAPE via
tdpo.opt files for Oracle 8i
nt: Monday, December 19, 2005 11:31 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Error message
I'm in the transfert of my IBM 3583 to my new IBM 3584 and I have some
error messages while I'm moving data from one library to the other
ANR1330E and ANR1331E
any ideas ???
Thanks
Luc Beaudoin
N
I'm in the transfert of my IBM 3583 to my new IBM 3584 and I have some
error messages while I'm moving data from one library to the other
ANR1330E and ANR1331E
any ideas ???
Thanks
Luc Beaudoin
Network Administrator / Storage
Hopital General Juif S.M.B.D.
Tel: (514) 340-8222 ext:8254
Timo - See that message number in 'dsmc help', at the IBM Web site,
and in ADSM QuickFacts.
Richard Sims
Hi List,
I`ve trouble with a TSM Backup Client.
Client (SuSE Linux 9.3 x86_64) 5.3.0.0 (API 64Bit)
Server (AIX 5.2) 5.1.65
Every night or at start/restart of the client I get this error:
09/16/2005 08:13:58 ANS2820E An interrupt has occurred.
The current operation will end and the client will sh
drivers solved the prolem.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Desalegne Guangul
Sent: 17 May 2005 01:39
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] ANRD error message?
Hi Everybody!
My Environment is TSM V 5.1.1.6 on Win2k SP4.
Did
Hi Everybody!
My Environment is TSM V 5.1.1.6 on Win2k SP4.
Did you ever found fix to the problem below? I'm getting the same error
messages and won't let me edit the client nodes.
Please let me know! Any one please help!
Thanks,
Greetings all!
Environment: TSM V 5.1.1.0 on Win2k SP3
Wh
Andy,
Thank you very much!
This time I went to Enterprise Management (again) and I
entered in the tsm server name that it was giving me and
this time I put in "localhost" (I swear I tried this before!) and
this time the server showed up.
Andrew Raibeck wrote:
> Timothy,
>
> 1) Silly question pe
Timothy,
1) Silly question perhaps, but are you certain you are providing the
server connection info for the intended TSM server?
2) When you click on "Health Monitor", do you see *any* TSM servers show
up in the list in the right-hand pane?
3) Connect to your TSM server via the Admin CLI and ru
claiming
> you've already added it, or is this an *additional* TSM server that you're
> trying to add as a connection to the ISC?
>
> regards,
>
> Paul
>
> - Original Message -
> From: "Timothy Hughes" <[EMAIL PROTECTED]>
> To:
> Se
Andrew
We upgraded our server(s) to 5.3 then installed the ISC and admin.
the server that I am trying to add to the Admin Center is up and running.
I am trying to add a server connection by doing the following
clicking
1) Health Monitor
2) select server action/ click add server connection
Addi
Paul
- Original Message -
From: "Timothy Hughes" <[EMAIL PROTECTED]>
To:
Sent: Monday, February 14, 2005 3:11 PM
Subject: Re: [ADSM-L] Error message when trying to install server to admin
center
The message seems self-expanatory but why doesn't the server
show up Wh
I don't know enough about the specifics of your configuration to give you
a specific answer. Are you trying to register more than one server whose
name is "TSM"? What are the exact steps that you have performed, from
start to finish, that lead to this message being issued?
Regards,
Andy
Andy Rai
The message seems self-expanatory but why doesn't the server
show up When I click on Health monitor? or anything else?
if it's been added?
Andrew Raibeck wrote:
> I'm not certain how knowing whether anyone else has come across this
> message is of any particular use. The message seems self-expl
I'm not certain how knowing whether anyone else has come across this
message is of any particular use. The message seems self-explanatory. Is
there a more specific problem or question that you have?
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal
Hello has anyone who installed TSM 5.3 come across this message when
trying to add a server to the Admin Center?
The specified server has been contacted and it has a server name of TSM.
This server connection name has already been added to the Administration
Center.
Every server added to the Admi
lient backup by TSM ,
some
> forget to close Outlook so when the backup occurred I got this error
message:
>
> 11/19/2004 23:44:03 ANS1228E Sending of object 'SYM:
> /Users/BDOTAN/Files/Office/Outlook/outlook.pst' failed
> 11/19/2004 23:44:03 ANS1301E Server detected syste
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Robert Ouzen
>Some users saved their outlook.ps on a Netware client backup
>by TSM , some forget to close Outlook so when the backup
>occurred I got this error message:
>
>11/19/2004 23:44:03 ANS1228E Sending o
Hi
Some users saved their outlook.ps on a Netware client backup by TSM , some
forget to close Outlook so when the backup occurred I got this error message:
11/19/2004 23:44:03 ANS1228E Sending of object
'SYM:/Users/BDOTAN/Files/Office/Outlook/outlook.pst' failed
11/19/2004 23:44:0
gt;
Hi to all
I have a Netware Client version 6.5 service pack revision 02 , my Tsm
Client Version is 5.2.0.3 and Tsm Server Version is 5.2.3.0
I got yesterday this error message:
server NW halted Wednesday, November 17, 2004 11:23:21.351 pm
Abend 1 on P00: Server-5.70.02: Page Fault Processo
ntage and how
to do it .
Thanks for the answer.
Regards Robert
-Original Message-
From: Troy Frank [mailto:[EMAIL PROTECTED]
Sent: Thursday, November 18, 2004 5:06 PM
To: רוברט אוזן; [EMAIL PROTECTED]
Subject: Re: Netware error message
Assuming that it's been fine up until no
Hi to all
I have a Netware Client version 6.5 service pack revision 02 , my Tsm Client
Version is 5.2.0.3 and Tsm Server Version is 5.2.3.0
I got yesterday this error message:
server NW halted Wednesday, November 17, 2004 11:23:21.351 pm
Abend 1 on P00: Server-5.70.02: Page Fault Processor
We upgraded from 5.2.2 to 5.2.3.0 to (among other
things) try and fix this problem. No luck. I've also
tried the txnbytelimit fix on the client, and again,
no luck.
If you find any other "solutions" I would be most
interested in them.
Thanks,
T.
--- Zoltan Forray <[EMAIL PROTECTED]> wrote:
>
Just upgraded my AIX server from 5.2.1.3 to 5.2.3.2.
Now I am seeing these error messages from various clients
9/2/2004 6:13:11 PM ANR1339W Session 710 underestimated a size allocation
request - 222MB more space was allocated to allow the operation to
continue.
I searched IBM.COM and found
c Beaudoin
Sent: Tuesday, August 31, 2004 2:07 PM
To: [EMAIL PROTECTED]
Subject: Re: server error message
Hi
check that link ... maybe it could help U
http://www.mail-archive.com/[EMAIL PROTECTED]/msg40927.html
Luc
"Weinstein, Stephen" <[EMAIL PROTECTED]>
Sent by: "A
ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:server error message
I just started having trouble with my Tivoli server 5.2.3. I am getting
the follow error.
ANR0287W contents of the page shadow file dbpgshdw.dbt are not valid.
the tivoli manual i
I just started having trouble with my Tivoli server 5.2.3. I am getting the follow
error.
ANR0287W contents of the page shadow file dbpgshdw.dbt are not valid.
the tivoli manual isn't much help..
anyone have an idea what this message means and how to fix it.
thanx
steve
***
To: [EMAIL PROTECTED]
Subject: error message in my actlog
Hi everyone
I have a lot of those in the actlog of my TSM server
ANE4987E
Error processing '\\003123a\c$\WINNT\system32\Perflib_Perfdata_5b0.dat':
the object is in use by another process
anybody knows what R t
] Behalf Of
Luc Beaudoin
Sent: dinsdag 20 juli 2004 15:48
To: [EMAIL PROTECTED]
Subject: error message in my actlog
Hi everyone
I have a lot of those in the actlog of my TSM server
ANE4987E
Error processing '\\003123a\c$\WINNT\system32\Perflib_Perfdata_5b0.dat':
the object is in use
Hi everyone
I have a lot of those in the actlog of my TSM server
ANE4987E
Error processing '\\003123a\c$\WINNT\system32\Perflib_Perfdata_5b0.dat':
the object is in use by another process
anybody knows what R those files (Perflib_perfdata ...) I think it's the
performance monitor but I'm not sur
I found out that My trial has expired. and thanks to Richard Sims I
located the tdpoerror.log which was stored in the oracle install directory
(from some reason) and this log file confirmed this. Strange that it only
had one error message saying the trial has expired and numerous other
|
| cc:
AN-00569: === ERROR MESSAGE STACK FOLLOWS ===
RMAN-00571: ===
RMAN-03002: failure of crosscheck command at 06/16/2004 11:14:31
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi
...
>passworddir /usr/tivoli/tsm/client/ba/bin/passwd.daily
>
>When i run dsmc command i receive the following error:
>
>/17/2003 17:12:54 TCA EXIT rc = 168
>11/17/03 17:12:54 ANS1503E Valid password not available for server
> 'TSMSERVER'.
My guess would be that either the "passwd
Hi to all
I have the following definition in dsm.sys (client option file on AIX):
SErvername tsmserver
COMMmethod TCPip
TCPPort1500
TCPServeraddress 192.168.1.100
NODENAME sap-bw
TCPNODELAY YES
passwordaccess generate
passworddir /usr/tivoli/tsm/client/ba/bin/passwd.daily
TED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
07.11.2003 09:43
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Error Message - ANS1512E
Hi to all
When i am trying to run a schedule
Hi to all
When i am trying to run a scheduled backup i receive the following error
message:
Executing Operating System command or script:
c:\tsmscripts\backupnas_daily.bat
The process cannot access the file because it is being used by onother
process
I have looked to the Task Manager but i did
Hi Richard,
U where right, the objects was not there.
Thanks
- Michael
-Oprindelig meddelelse-
Fra: Richard Sims [mailto:[EMAIL PROTECTED]
Sendt: 21. september 2003 19:22
Til: [EMAIL PROTECTED]
Emne: Re: Error message - Lotus Domino
>When trying to backup tranaction logs for Lo
>When trying to backup tranaction logs for Lotus Domino. I got the following
>error:
>ACD0200E (Unable to open a file for reading).
>What can course this problem!
>Whar have I done wrong.
Probably, working on Sunday. :-)
This might be because some type of Domino maintenance activity is happening
When trying to backup tranaction logs for Lotus Domino. I got the following error:
ACD0200E (Unable to open a file for reading).
What can course this problem!
Whar have I done wrong.
Please advice
- Michael
anyone ever see this before in the actlog while trying to checkin a scratch
tape?:
ANR2033E QUERY STGPOOL: Command failed - lock conflict.
ANR0405I Session 107371 ended for administrator ADMIN (AIX).
ANRD mmslib.c(7894): ThreadId<79> Test storage volume failed - rc =
142.
ANRD mmslib.c(781
m: "Scott Figgins" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, June 23, 2003 10:17 AM
Subject: Re: oops forgot the error message.
Anderson/Group -
# lsdev -Cc tape
rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive
rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive
From: Scott Figgins [mailto:[EMAIL PROTECTED]
# lsdev -Cc tape
rmt0 Available 1P-08-00-0,0 4.0 GB 4mm Tape Drive
rmt1 Available 1P-08-00-2,0 4.0 GB 4mm Tape Drive
smc0 Available 1P-08-00-3,0 IBM 7336 Tape Medium Changer
# lsdev -Cc adsmtape
mt0 Available 1P-08-00-0,0 Tivoli Storage Manager Tape Dr
dev -Cc tape
> # lsdev -Cc adsmtape
>
> Regards,
>
> Anderson
>
> - Original Message -
> From: "Scott Figgins" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Monday, June 23, 2003 12:46 AM
> Subject: oops forgot the error message.
>
>
I do have the latest ATAPE 8.2.5.0. Yes you do need it for it to define the
SMC0 media changer. I have loaded the AIX ML4 Maintenance Level. The drives
work fine with sysback and at the normal AIX level. It's just when I try to
setup the library. Thanks for your help for this Newbie at TSM :)
Scot
6.2003 07:02
Please respond to "ADSM: Dist Stor Manager"
To: [EMAIL PROTECTED]
cc:
Subject:Re: oops forgot the error message.
Hot Diggety! Dan Foster was rumored to have written:
> Hot Diggety! Scott Figgins was rumored to have written:
> >
quot;Scott Figgins" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, June 23, 2003 12:46 AM
Subject: oops forgot the error message.
I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after
defining a 7336-205 4mm Tape library. Any ideas? IBM says this
Hot Diggety! Dan Foster was rumored to have written:
> Hot Diggety! Scott Figgins was rumored to have written:
> > I'm getting this error in my Server log on AIX 5.1 with TSM 5.1.6.5 after
> > defining a 7336-205 4mm Tape library. Any ideas? IBM says this library is
> > supported in the BASE codese
1 - 100 of 208 matches
Mail list logo
