Re: [AFMUG] AF2015 List setup

disappointing that we can't start rodizio discussions on af2015 until FEB 2... b. lol - Original Message - From: Paul McCall To: af@afmug.com Sent: Friday, January 16, 2015 3:33 PM Subject: Re: [AFMUG] AF2015 List setup +1 LOL From: Af [mailto:

Re: [AFMUG] Teltonika Wimax CPE

Yeah, unfortunately we didn't get far with these guys despite the persistence of the sales dude. I believe it requires an engineering firmware or credentials or some such and they weren't exactly jumping to hand that out. If I recall, they want to sell you, in bulk, units that are pre-programmed

Re: [AFMUG] Canopy AP Utilization Graphing

I've seen the same thing, like middle of the night when there's almost no traffic on an AP. But when an AP is obviously overloaded, this stat is much higher than you'd typically see for those other times. Like a 900 AP sitting there pushing 3.4Mbps will show 15-20% discard rate. And another tim

Re: [AFMUG] Canopy AP Utilization Graphing

Like this? [root@cacti ~]# snmpwalk -v2c -cCanopy 192.168.111.1 1.3.6.1.4.1.161.19.3.1.7.35 SNMPv2-SMI::enterprises.161.19.3.1.7.35.0 = INTEGER: 2 Not exactly sure, but I think you need the throughput monitoring feature enabled to get this stat. I have it enabled on every AP anyway. I have

Re: [AFMUG] Forrest's Monday Rant - MikroTik Ethernet Funkyness

They are the best Ethernet trolls around. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 27, 2015 7:42 PM, "Forrest Christian (List Account)" < li...@packetflux.com> wrote: > The most ironic thing about my whole rant issue - and I just realiz

Re: [AFMUG] Forrest's Monday Rant - MikroTik Ethernet Funkyness

The most ironic thing about my whole rant issue - and I just realized it late last night. When I finally *want* a 100Mb/s link, it gives me a 10Mb/s one, and refuses to play nice at 100Mb/s - only 10. -forrest On Tue, Jan 27, 2015 at 5:09 PM, George Skorup (Cyber Broadcasting) < geo...@cbcast.co

Re: [AFMUG] Canopy AP Utilization Graphing

On Tue, Jan 27, 2015 at 5:54 PM, George Skorup (Cyber Broadcasting) wrote: > rfOutDiscardRate > > Object ID: 1.3.6.1.4.1.161.19.3.1.7.35 > Syntax: INTEGER > Constraints: 0..100 > Access: read-only > Status: current > > Percentage of OutDiscards on the RF link (RF Overload %) in the last minute. >

Re: [AFMUG] And this is the agency that wants to tax and regulate us

I’m shocked, shocked ... https://www.youtube.com/watch?v=SjbPi00k_ME From: Rory Conaway Sent: Tuesday, January 27, 2015 2:21 PM To: af@afmug.com Subject: [AFMUG] And this is the agency that wants to tax and regulate us http://denver.cbslocal.com/2015/01/26/phone-company-outraged-by-fraud-abuse

[AFMUG] glibc vulnerability

http://arstechnica.com/security/2015/01/highly-critical-ghost-allowing-code-execution-affects-most-linux-systems/ Says patch is 2 years old but not in most distributions. Probably requires reboot.

Re: [AFMUG] Forrest's Monday Rant - MikroTik Ethernet Funkyness

That Base-II you replaced for me made this quite obvious. It would not work in any port unless forced to 10HD. That's the one I did all of the polarity swapping on and nothing would make it work with auto-nego. Worked perfectly fine plugged into any old dumb or managed switch. Nothing MikroTik

Re: [AFMUG] [WISPA Members] Petition Circulating

In telephone there's a thing called a "de minimus" provider. There are some conditions for it, but basically if you are collecting less than $10k /year for USF then it's possible you can just keep the money. I'm wondering if this will have a similar provision. I also wonder if the 16.8% is o

Re: [AFMUG] Canopy AP Utilization Graphing

rfOutDiscardRate Object ID: 1.3.6.1.4.1.161.19.3.1.7.35 Syntax: INTEGER Constraints: 0..100 Access: read-only Status: current Percentage of OutDiscards on the RF link (RF Overload %) in the last minute. On 1/26/2015 12:07 PM, Adam Moffett wrote: I have often thought they needed something like "

Re: [AFMUG] Alvarion- 2.5Ghz WIMAX network 75 sites

Openrange? On 1/27/2015 4:08 PM, Peter Kranz wrote: Lots of junk, but lots of nice Eltek 48V flatpacks.. *Peter Kranz *Founder/CEO - Unwired Ltd www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com *F

Re: [AFMUG] Alvarion- 2.5Ghz WIMAX network 75 sites

Lots of junk, but lots of nice Eltek 48V flatpacks.. Peter Kranz Founder/CEO - Unwired Ltd www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com From: Af [mailto:af-boun...@afmug.com] On Behalf Of

Re: [AFMUG] is fiber more brittle in cold?

Lol yes they get a little grumpy in the cold Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / car...@race.com / http://www.race.com From: Chuck McCown mailto:ch...@wbmfg.co

Re: [AFMUG] Teltonika Wimax CPE

Andrius Mackevicius is the fella who calls and emails us... dont mention me to him On Tue, Jan 27, 2015 at 3:48 PM, Philip Rankin wrote: > Prolly the best place for them! Maybe the company too with this response > performance! > > On Tue, Jan 27, 2015 at 3:46 PM, That One Guy > wrote: > >> Ho

Re: [AFMUG] Teltonika Wimax CPE

Prolly the best place for them! Maybe the company too with this response performance! On Tue, Jan 27, 2015 at 3:46 PM, That One Guy wrote: > Holy cow, you cant get them to respond? Jebus, they call constantly. we > have 2 of their units sitting on the shelf just because I havent thrown > them i

Re: [AFMUG] WiFi for restaurant

I teach the classes, and a lot of the Unifi students are doing some variation of this as part of their other included managed services. So maybe they're AV, put in all the fancy AV stuff and tie together with Unifi and have a maintenance package for all the hardware together. Or managed IT service

Re: [AFMUG] Teltonika Wimax CPE

Holy cow, you cant get them to respond? Jebus, they call constantly. we have 2 of their units sitting on the shelf just because I havent thrown them in the junk mans collection box On Tue, Jan 27, 2015 at 3:40 PM, Philip Rankin wrote: > Hey all, I have a Teltonika 3.65GHz Wimax CPE that I'm havi

[AFMUG] Teltonika Wimax CPE

Hey all, I have a Teltonika 3.65GHz Wimax CPE that I'm having difficulty programming the radio features, channel bandwidth and channels. I can't get Teltonika to respond for any information. I'm using the default user username and user password to try to program the thing. I suspect it is a POS,

Re: [AFMUG] WiFi for restaurant

We're thinking a managed WiFi service might be appropriate. We have quite a few subs with really large homes, and a managing a bunch of them could be significant overhead. Wondering if anyone is doing this on any kind of production scale, and what seems appropriate for residential service. W

Re: [AFMUG] WiFi for restaurant

Request it on their forum. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com - Original Message - From: "Bill Prince" To: af@afmug.com Sent: Tuesday, January 27, 2015 3:29:47 PM Subject: Re: [AFMUG] WiFi for restaurant Yah. Seems a bit involved for so

Re: [AFMUG] WiFi for restaurant

Yah. Seems a bit involved for something you think would be part of the basic package. Especially when the APs will all be installed at the customer's premises; we don't want to have to do a truck roll to move each one into our cloud controller, but with many of them it would be required becaus

Re: [AFMUG] WiFi for restaurant

I would like to see a migration tool of some sort. Our big controller has gotten a bit too big and we are about to split it into multiple pieces. It's an adventure. On Tue, Jan 27, 2015 at 3:47 PM, Bill Prince wrote: > I see one thing that could be smoother. We set up a couple of Unifi APs; >

Re: [AFMUG] WiFi for restaurant

I see one thing that could be smoother. We set up a couple of Unifi APs; one here in our office, and another in a large home. The controller was on my traveling laptop. Now that each of them is running, I wanted to move the controller to a VM in our colo. It seems to me that if you are logg

Re: [AFMUG] WiFi for restaurant

Thanks for the update! On Tue, Jan 27, 2015 at 1:41 PM, Bill Prince wrote: > I've tried stopping/starting the controller several times, and have not > see it again. So maybe it was a coincidence with the laptop involved. > > bp > > > > On 1/21/2015 12:09 PM, Ben Moore wrote: > > Hi Bill - > >

Re: [AFMUG] WiFi for restaurant

I've tried stopping/starting the controller several times, and have not see it again. So maybe it was a coincidence with the laptop involved. bp On 1/21/2015 12:09 PM, Ben Moore wrote: Hi Bill - I have never seen this. I have done this various times in my tests and never had an issue. Le

Re: [AFMUG] And this is the agency that wants to tax and regulate us

Ring ring ring ring Obamaphone -Original Message- From: Rory Conaway Sender: "Af" Date: Tue, 27 Jan 2015 20:21:15 To: af@afmug.com Reply-To: af@afmug.com Subject: [AFMUG] And this is the agency that wants to tax and regulate us http://denver.cbslocal.com/2015/01/26/phone-company-outrag

[AFMUG] And this is the agency that wants to tax and regulate us

http://denver.cbslocal.com/2015/01/26/phone-company-outraged-by-fraud-abuse-in-obamaphone-program/ The FCC can't even create a program that can regulate a simple program like handing out phones without massive fraud and corruption.I say give them more tax money, the Comcast corporate jet nee

Re: [AFMUG] [FS] Training ONLINE

Can we get a detailed syllabus for what is covered in this class? On 1/27/2015 12:33 PM, Butch Evans wrote: On 01/25/2015 12:38 PM, CBB - Jay Fuller wrote: Given a month or two out, i'd try to schedule some of this for the guys. If this one goes well enough, there will be others to follow.

Re: [AFMUG] ID this PCB Antenna Connector

You think they don't? :) On January 27, 2015 9:16:49 AM AKST, Adam Moffett wrote: > >I hate U.Fl. I think I need to hire a kid with tiny fingers to plug >those in. >> I concur doctor :) >> >> On January 27, 2015 8:53:19 AM AKST, Josh Luthman >> wrote: >> >> Looks like ufl. >> >> Josh

Re: [AFMUG] ID this PCB Antenna Connector

Ahh have fun with it then :D vlad On 1/27/2015 12:52 PM, Chris Fabien wrote: It came with a little internal antenna connected to that radio by coax, so the port is live. Was just thinking if hooking up an external to the 2.4 radio would help range, seems like it would. On Tue, Jan 27, 2015

Re: [AFMUG] ID this PCB Antenna Connector

They have a little switch built in too. From: Mathew Howard Sent: Tuesday, January 27, 2015 11:53 AM To: af Subject: Re: [AFMUG] ID this PCB Antenna Connector Some of the Ubiquiti radios (NanoBridges, if I remember right), have u.fl connectors inside, I've never tried it, but I've always assum

Re: [AFMUG] ID this PCB Antenna Connector

There's no reason at all that it wouldn't work in that case - assuming the external antenna is higher gain than what it came with. On Tue, Jan 27, 2015 at 12:52 PM, Chris Fabien wrote: > It came with a little internal antenna connected to that radio by coax, so > the port is live. Was just think

Re: [AFMUG] ID this PCB Antenna Connector

Some of the Ubiquiti radios (NanoBridges, if I remember right), have u.fl connectors inside, I've never tried it, but I've always assumed those aren't active since they have antennas integrated onto the board. On Tue, Jan 27, 2015 at 12:35 PM, Josh Luthman wrote: > Never seen that before. Any e

Re: [AFMUG] ID this PCB Antenna Connector

It came with a little internal antenna connected to that radio by coax, so the port is live. Was just thinking if hooking up an external to the 2.4 radio would help range, seems like it would. On Tue, Jan 27, 2015 at 1:49 PM, Vlad Sedov wrote: > if the connector wasn't made to be user-accessibl

Re: [AFMUG] ID this PCB Antenna Connector

if the connector wasn't made to be user-accessible, it stands to reason that it would not be enabled in the firmware.. you wouldn't want to transmit on that side if there's no antenna. vlad On 1/27/2015 12:35 PM, Josh Luthman wrote: Never seen that before. Any examples where you've seen it?

Re: [AFMUG] ID this PCB Antenna Connector

U.FL isn't intended to be repeatedly plugged/unplugged, it was designed for laptop miniPCI cards back when 802.11g was hot shit, it's for electronics manufacturing to connect a laptop's built in antenna to the 50 ohm RF connector on a minipci card module. On

Re: [AFMUG] ID this PCB Antenna Connector

Never seen that before. Any examples where you've seen it? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 27, 2015 at 1:33 PM, Vlad Sedov wrote: > unless that antenna connector is disabled in the router firmware. > > > vlad > > > On

Re: [AFMUG] [FS] Training ONLINE

On 01/25/2015 12:38 PM, CBB - Jay Fuller wrote: Given a month or two out, i'd try to schedule some of this for the guys. If this one goes well enough, there will be others to follow. -- Butch Evans 702-537-0979 Network Support and Engineering http://store.wispgear.net/ http://www.butchevans.c

Re: [AFMUG] ID this PCB Antenna Connector

unless that antenna connector is disabled in the router firmware. vlad On 1/27/2015 12:30 PM, Josh Luthman wrote: You will always be able to add external antennas if there's a connector =) Generally speaking people will get a u.fl to N female bulkhead. Then box it up as "the radio". On t

Re: [AFMUG] ID this PCB Antenna Connector

You will always be able to add external antennas if there's a connector =) Generally speaking people will get a u.fl to N female bulkhead. Then box it up as "the radio". On the tower you have the antenna, N male jumper and "the radio". Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 110

Re: [AFMUG] ID this PCB Antenna Connector

Thanks guys. Trying to see if we can add external antenna to these new routers we're testing. On Tue, Jan 27, 2015 at 1:19 PM, Josh Luthman wrote: > Position above it and snap them together, that was pretty easy. > Disconnecting them was a pain though... > > > Josh Luthman > Office: 937-552-2340

Re: [AFMUG] ID this PCB Antenna Connector

Position above it and snap them together, that was pretty easy. Disconnecting them was a pain though... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jan 27, 2015 at 1:16 PM, Adam Moffett wrote: > > I hate U.Fl. I think I need to hire a

Re: [AFMUG] ID this PCB Antenna Connector

I hate U.Fl. I think I need to hire a kid with tiny fingers to plug those in. I concur doctor :) On January 27, 2015 8:53:19 AM AKST, Josh Luthman wrote: Looks like ufl. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 4

Re: [AFMUG] ID this PCB Antenna Connector

I concur doctor :) On January 27, 2015 8:53:19 AM AKST, Josh Luthman wrote: >Looks like ufl. > >Josh Luthman >Office: 937-552-2340 >Direct: 937-552-2343 >1100 Wayne St >Suite 1337 >Troy, OH 45373 >On Jan 27, 2015 12:51 PM, "Chris Fabien" wrote: > >> Can anyone id the connectors on the left? I p

Re: [AFMUG] ID this PCB Antenna Connector

Quick-draw Josh strikes again.. lol vlad On 1/27/2015 11:53 AM, Josh Luthman wrote: Looks like ufl. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 27, 2015 12:51 PM, "Chris Fabien" > wrote: Can anyone

Re: [AFMUG] ID this PCB Antenna Connector

U.FL maybe? vlad On 1/27/2015 11:51 AM, Chris Fabien wrote: Can anyone id the connectors on the left? I put a mikrotik with MMCX next to it for comparison.

Re: [AFMUG] ID this PCB Antenna Connector

Looks like ufl. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jan 27, 2015 12:51 PM, "Chris Fabien" wrote: > Can anyone id the connectors on the left? I put a mikrotik with MMCX next > to it for comparison. >

Re: [AFMUG] Alvarion- 2.5Ghz WIMAX network 75 sites

Wonder if the price includes the 2.5 GHz license? bp On 1/26/2015 9:10 PM, Colin Stanners wrote: http://www.ebay.com/itm/111065551821 Get it while it's hot! Only $375K

Re: [AFMUG] Alvarion- 2.5Ghz WIMAX network 75 sites

Those buildings look yum! From: Af [mailto:af-boun...@afmug.com] On Behalf Of Colin Stanners Sent: Tuesday, January 27, 2015 12:11 AM To: af@afmug.com Subject: [AFMUG] Alvarion- 2.5Ghz WIMAX network 75 sites http://www.ebay.com/itm/111065551821 Get it while it's hot! Only $375K

[AFMUG] ISP Radio Wednesday -- Telrad LTE with Patrick Leary

http://www.ispradio.com/images/ispLogoWoodWhite.PNGWednesday we will have Patrick Leary with Telrad talking everything LTE. Wednesday 11am CST Don't forgot you can download the previous episodes to put on your media player and listen while in your car free

Re: [AFMUG] is fiber more brittle in cold?

That includes splicers, as the human splicers, too. From: Carlos Alcantar Sent: Tuesday, January 27, 2015 12:56 AM To: af@afmug.com Subject: Re: [AFMUG] is fiber more brittle in cold? Also remember the splicers them selfs may not operate the same at lower temperatures, we have notices a bit

Re: [AFMUG] Fiber pricing.

Just be careful on the duct, sometimes it's quoted + shipping. My quotes are in-line with Chris, but include shipping...We've been at .33 on the low side and .40 on the high side for 1.25" SDR11...SDR13.5 can be had for cheaper, but we don't recommend it. I've seen pricing all over the place, .75