Re: [AFMUG] a new one, I think...

According to a friend of mine "Anything can be built." We have several solar sites, and when they have enough battery and panels, they are every bit as reliable as utility power. In fact, one site we have had installed for 4 years without a single power issue. Our older sites have had some

Re: [AFMUG] 2.5Gbps lic symmetrical link

I think ceragon can do this with IP20C-hp in 4x4 mimo? On Fri, Sep 11, 2015 at 9:12 AM, Gino Villarini wrote: > you need to load balance via routing or mpls > > i would say 11ghz 4+0 using 80 mhz channels > > On Fri, Sep 11, 2015 at 11:54 AM, Sorin Esanu

Re: [AFMUG] 2.5Gbps lic symmetrical link

yeah, we kind of know what we have to do. what I would like to know is what vendors we should look for radio side. thanks!

Re: [AFMUG] a new one, I think...

Interesting… 8c off-peak 12.2c mid-peak 16.1c peak Supposed to jump 40% over next three years ;( The worst part is the delivery charges too … I don’t have a bill in front of me but it’s quite substantial … A lot of politics but prices are very high in the province of Ontario in

[AFMUG] LED colors and color blindness

A quick question for those who have problems distinguishing colors or those who know about colorblindness. Let's assume I need to add a set of indicators to some new products. I'm considering using some multicolored leds (aka dual, tri, full) for indication on a single led. For instance

Re: [AFMUG] LED colors and color blindness

I don't know anything about colorblindness, but one mistake I've seen on certain other products is using LEDs that are barely visible in daylight... so that's another thing to keep in mind. On Fri, Sep 11, 2015 at 1:55 PM, Forrest Christian (List Account) < li...@packetflux.com> wrote: > A quick

Re: [AFMUG] a new one, I think...

Take your kWh consumed for a full year. The power company can probably email that to you. Say it is 15,000 kWh. Divide by 3 and that conveniently works out to how many watts you need to offset about 70% of your bill. From: Paul Stewart Sent: Friday, September 11, 2015 12:57 PM To:

Re: [AFMUG] LED colors and color blindness

Forrest, We have an employee with this issue and the trick for him is distinguishing between certain shades of green and blue. With some wire and lighting conditions, he will send me a cell phone pic of the wire and ask if the green is on the right or the left.As long as you don't go

Re: [AFMUG] pmp100 upgrade path to 13.4

Was there some reason to go through stages in 450 due to something about frequency calibration drifting or something? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Wednesday, September 9, 2015 2:53 PM To: af@afmug.com Subject: Re: [AFMUG] pmp100 upgrade path to 13.4

Re: [AFMUG] 2.5Gbps lic symmetrical link

Pull quotes from all three, see who comes up with the best price. Never hurts to have vendors competing, especially with that is sure to be a VERY expensive link. Peter Kranz www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207-

Re: [AFMUG] a new one, I think...

Northern latitudes are hard just because of the low sun hours. But the price keeps dropping, and with each drop in price, and each increase in energy costs, solar keeps getting more and more attractive. In places with high energy costs and lots of sun, payback is starting to be so short that it

Re: [AFMUG] Field Service Bulletin - PMP 450 SM

We are working hard to determine the extent of any problems outside the date range already identified. There are personnel at the factory. We are investigating the solder process, solder material, reflow process, etc. to eliminate any sources of problems due to this (or related) issues. There

Re: [AFMUG] LED colors and color blindness

True, it's not nearly as big of a problem as on a radio, but if it's in a NEMA box on top of a grain leg or something like that, it can still be a problem. On Fri, Sep 11, 2015 at 2:39 PM, Josh Luthman wrote: > In a cabinet though? > > Josh Luthman > Office:

Re: [AFMUG] Field Service Bulletin - PMP 450 SM

I presume you are heat cycling while on a shake table? From: Matt Mangriotis Sent: Friday, September 11, 2015 1:39 PM To: af@afmug.com Subject: Re: [AFMUG] Field Service Bulletin - PMP 450 SM We are working hard to determine the extent of any problems outside the date range already

Re: [AFMUG] a new one, I think...

Wait 2-3 years for the Perovskite panels coming out. The price is going to nosedive for solar. ROI’s are going to be measured in months, not years. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Forrest Christian (List Account) Sent: Friday, September 11, 2015 11:45 AM To: af

Re: [AFMUG] LED colors and color blindness

I'm color blind. That said, I also have a pilot's license, and have passed a field test authorizing me to fly at night because I am able to distinguish light signals. Not all color blindness is the same. There are varying degrees, as well as specific color issues for many different kinds of

Re: [AFMUG] a new one, I think...

Most regular sized panels are about 280 watts. Figure 11-12 watts per square foot. From: Paul McCall Sent: Friday, September 11, 2015 2:42 PM To: af@afmug.com Subject: Re: [AFMUG] a new one, I think... Chuck, What would the panel size before for 100 to 110watt? How would the mounting

Re: [AFMUG] Field Service Bulletin - PMP 450 SM

That's seriously just fucked up. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Sep 11, 2015 at 3:20 PM, Jeff Hardy wrote: > I'll second that. We've had 10 out of 16 fail so far from a box of 25. > One

Re: [AFMUG] a new one, I think...

I can get you a complete system for about $1/watt. Panels, inverter and mount. From: Forrest Christian (List Account) Sent: Friday, September 11, 2015 12:45 PM To: af Subject: Re: [AFMUG] a new one, I think... Depending on where you are, you may want to consider a grid-tie system.

Re: [AFMUG] 2.5Gbps lic symmetrical link

Do you know anything about Exalt and Bridgewave? I've just got suggested those... On 9/11/2015 9:07 PM, Peter Kranz wrote: Yhea IP20C.. *Peter Kranz *www.UnwiredLtd.com Desk: 510-868-1614 x100 Mobile: 510-207- pkr...@unwiredltd.com

Re: [AFMUG] Field Service Bulletin - PMP 450 SM

I'll second that. We've had 10 out of 16 fail so far from a box of 25. One customer has had 4 radios now installed at his location. We've started replacing 450s with FSK equipment in critical locations. We are trying to get the remainder of this box (9 radios) replaced since it is very

Re: [AFMUG] LED colors and color blindness

In a cabinet though? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 11, 2015 3:38 PM, "Mathew Howard" wrote: > I don't know anything about colorblindness, but one mistake I've seen on > certain other products is using

Re: [AFMUG] LED colors and color blindness

I know I can see WB APC cards' LEDs just fine in bright daylight, but that's almost always in a NEMA box. In this same box I can easily see the MT lights that you can't see easily in the truck. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On

Re: [AFMUG] LED colors and color blindness

I find many customers have a hard time distinguishing green from yellow. (or amber, orange, whatever you call it) It’s easier if there’s a sample next to it, like a green power LED. Also if there’s a brightness difference, like blue and white are generally blindingly bright. Also I hate it

Re: [AFMUG] LED colors and color blindness

Orange and Red is a dumb dumb choice. I know there are websites out there that recommend colors based on one you choose (like red contrasts with green or whatever). Two colors next to each other is a clear nono. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337

Re: [AFMUG] a new one, I think...

Chuck, What would the panel size before for 100 to 110watt? How would the mounting be up a water tower, as far as wind-bearing in a 100mph or 120mph storm Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Friday, September 11, 2015 3:55 PM To: af Subject: Re:

Re: [AFMUG] 2.5Gbps lic symmetrical link

Bridgewave is millimeter wave, right? So not at that distance. Unless you can break up that 8 miles into multiple hops. Exalt doesn’t seem a logical choice for that throughput, they are probably stuck on 2-3 year old technology. Start with Ceragon (or Cambium, same thing), give them your

Re: [AFMUG] Field Service Bulletin - PMP 450 SM

Dear Cambium, I hope by now you have sent few people to factory and they are sitting down there and running test for a week at least before the radios leave the factory. Can somebody address to us on what is going on and what steps are being taken to address this? Tushar

Re: [AFMUG] a new one, I think...

Grid-tie would probably be the better way to go for you. Assuming it works the same way it does around here, you would mostly be getting paid the peak rate for your power and a good part of what you use would presumably be off-peak, so you could potentially only need to generate half as much as

Re: [AFMUG] LED colors and color blindness

The biggest problem I've had in NEMA boxes is trying to tell the difference between orange and red on Mikrotik RB750UPs. The other Mikrotik stuff usually isn't too bad and the LEDs on the WB cards seem fine. On Fri, Sep 11, 2015 at 3:04 PM, Josh Luthman wrote: > I

Re: [AFMUG] 2.5Gbps lic symmetrical link

Bridgewave ge80 will 5 miles Unless something out there. Exalt is like the dead parrot...no more...unless someone bought them? Gino's recommended gear he actually uses. Solid recommendation On Sep 11, 2015 2:22 PM, "Sorin Esanu" wrote: > Do you know anything about Exalt

[AFMUG] Stainless Bolts

Is there a spray that can be used to loosen stainless bolts that are just starting to seize? They still turn a bit but I dared not try any farther. Pre sprayed them with CRC silicone spray but they still seized. Was wandering if there was something better then the silicone spray I could use?

Re: [AFMUG] LED colors and color blindness

Haha, people of less color. From: Sam Lambie Sent: Friday, September 11, 2015 4:51 PM To: af@afmug.com Subject: Re: [AFMUG] LED colors and color blindness I remember Sean Heskitt mentioning a while ago about the epmp GUI in its early stages was hard for him to be able to tell the difference

Re: [AFMUG] Ok Josh. Happy now?

Adequate. I'll be happy when food is in front of me :) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 11, 2015 7:18 PM, "Jaime Solorza" wrote: > On water tank railing and tank. >

Re: [AFMUG] 2.5Gbps lic symmetrical link

Why not look at the AF24HD for that application? I would think 5 miles would be in it’s wheelhouse. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sorin Esanu Sent: Friday, September 11, 2015 2:30 PM To: af@afmug.com Subject: Re: [AFMUG] 2.5Gbps lic symmetrical link Ken, It's

Re: [AFMUG] 2.5Gbps lic symmetrical link

Never ask a vendor one question in isolation from the other requirements, or the answer will always be yes. Can you do 3 Gbps? Can you go 5 miles? Can you do 3 Gbps at 5 miles? How many nines availability at 3 Gbps and 5 miles in my rain zone? What minimum throughput for 5 nines at 5 miles in my

Re: [AFMUG] LED colors and color blindness

I remember Sean Heskitt mentioning a while ago about the epmp GUI in its early stages was hard for him to be able to tell the difference between orange and green. Maybe he will chime in. Cambium listened to him and made it much easier for people of less color to adapt.

Re: [AFMUG] Ok Josh. Happy now?

I like using those. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: "Jaime Solorza" To: "Animal Farm" Sent: Friday,

Re: [AFMUG] 2.5Gbps lic symmetrical link

Ken, It's actually 8 miles :) Exalt quoted NodeX. I am not sure about exact specs, as their website is down (lol). On 9/12/2015 12:26 AM, Ken Hohhof wrote: Never ask a vendor one question in isolation from the other requirements, or the answer will always be yes. Can you do 3 Gbps? Can

Re: [AFMUG] a new one, I think...

Yes. Especially if you bond the common to the ground bus as is the usual. May even be NEC, don't know. On Thu, Sep 10, 2015, 10:48 PM Paul McCall wrote: > “Bad things can pass transformers”, meaning pass isolation transformers as > well? > > > > *From:* Af

Re: [AFMUG] a new one, I think...

Just remember you will need heavier gauge wire at 24V than 48V. Current is double, and the voltage drop as a percentage is double, so the net effect is like 4X. That’s like the difference between 12 AWG and 18 AWG wire. From: Paul McCall Sent: Thursday, September 10, 2015 10:38 PM To:

Re: [AFMUG] B5c with 2' Rocket Dish

Yep, got one up now. I'm shooting 14 miles to a 34dB dish in a high-interference environment. It's okay but I'm going to upgrade it to a 34dBi and also try the dual-slant to see the difference. -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Brett A Mansfield

Re: [AFMUG] School me on AF5X

I modified all of the AF5X dishes before the kits were released. Now we use the cross-pol kits on all of the Rocket dishes. We haven't had any issues. I deployed a 18.5 mile link yesterday (3' on both sides), getting 256 QAM. 75% duty cycle, pulling 300Mbps by 100Mbps on 5225. On Thu, Sep 10,

[AFMUG] B5c with 2' Rocket Dish

Anyone use the Mimosa B5c along with the UBNT 30dB rocket dish? What kind of performance did you get? Any good for collocation? Thank you, Brett A Mansfield

Re: [AFMUG] 4 hour spider viagra

(walked right into that one) On Fri, Sep 11, 2015 at 10:51 PM, Jeremy wrote: > A big pussy with a four hour hard-on?? Seems like a perfect match to > me > > On Fri, Sep 11, 2015 at 8:15 PM, Jaime Solorza > wrote: > >> No way

Re: [AFMUG] 4 hour spider viagra

A big pussy with a four hour hard-on?? Seems like a perfect match to me On Fri, Sep 11, 2015 at 8:15 PM, Jaime Solorza wrote: > No way ...ESE...after having millions well thousands well hundreds well > too many daddy long legs on me in attic of Castle AFB I am

Re: [AFMUG] Fw: a new one, I think...

If you get the gearing right and a good rope grab it could save a lot of time climbing too! On Sep 11, 2015 12:04 AM, "Chuck McCown" wrote: > You could add solar to the generator. Lots of folks do a mixed system > like that in off grid situations. > > Here is one, put a pulley

Re: [AFMUG] Fw: a new one, I think...

Chuck, you tritely think outside the box. But I think this is the best idea yet. There is a company that makes a small 24VDC propane generator. I'll try to find it. On Thu, Sep 10, 2015, 10:55 PM Chuck McCown wrote: > You could have a propane generator charge the batts for a

Re: [AFMUG] a new one, I think...

That typically is done at the service panel in 95% of the cases, as far as I have seen. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Lewis Bergman Sent: Friday, September 11, 2015 8:05 AM To: af@afmug.com Subject: Re: [AFMUG] a new one, I think... Yes. Especially if you bond the common

Re: [AFMUG] Stainless Bolts

Liquid wrench maybe... On Friday, September 11, 2015, Matt wrote: > Is there a spray that can be used to loosen stainless bolts that are > just starting to seize? They still turn a bit but I dared not try any > farther. Pre sprayed them with CRC silicone spray but

Re: [AFMUG] Ok Josh. Happy now?

Yes, spiders can be very dangerous: http://www.dailymail.co.uk/sciencetech/article-1363810/Spider-venom-cause-hour-erections-new-Viagra.html From: Mathew Howard Sent: Friday, September 11, 2015 7:11 PM To: af Subject: Re: [AFMUG] Ok Josh. Happy now? Best to hit it with a shovel... just in

Re: [AFMUG] Stainless Bolts

Yeah, it's probably sawzall time. But one thought comes to mind, I haven't tried this, but what about lock fluid that is like penetrating oil with graphite in it? I say that because some anti-seize compounds contain graphite. -Original Message- From: Bill Prince Sent: Friday,

Re: [AFMUG] 2.5Gbps lic symmetrical link

He said he wants to go 8 miles and I'm not sure I'd use the 24HD for more than 2.5 or 3 in my environment and that's giving the HD a lot of credit over the 24 and he needs 2.5 gigabit, not just 1. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest

[AFMUG] 4 hour spider viagra

That’s gotta be an agonizing 3 hours and 57 minutes. From: Ken Hohhof Sent: Friday, September 11, 2015 6:23 PM To: af@afmug.com Subject: Re: [AFMUG] Ok Josh. Happy now? Yes, spiders can be very dangerous:

Re: [AFMUG] Ok Josh. Happy now?

Looks like some kind of orb weaver spider - they're pretty scary looking, but I don't think they're particularly dangerous. On Friday, September 11, 2015, Ken Hohhof wrote: > A! > > What kind is that? > > *From:* Jaime Solorza >

Re: [AFMUG] Stainless Bolts

I you want exact replacement, I have ordered from McMaster-Carr: 18-8 Stainless Steel Hex Head Cap Screw, M8x1.25 thread, 140mm long, fully threaded, $2.70 ea 18-8 Stainless Steel Serrated-Flange Locknut, M8x1.25 thread, $6.24 per pack of 25 8 mm is very close to 5/16, so you could probably

Re: [AFMUG] Ok Josh. Happy now?

Real Mexican Food On Sep 11, 2015 5:30 PM, "Josh Luthman" wrote: > Adequate. I'll be happy when food is in front of me :) > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Sep 11, 2015 7:18 PM,

Re: [AFMUG] Ok Josh. Happy now?

A! What kind is that? From: Jaime Solorza Sent: Friday, September 11, 2015 6:21 PM To: Animal Farm Subject: Re: [AFMUG] Ok Josh. Happy now? And lazy assistant On Sep 11, 2015 5:18 PM, "Jaime Solorza" wrote: On

Re: [AFMUG] Ok Josh. Happy now?

Friend says its a harmless garden spider...fuck that Looks mean to me On Sep 11, 2015 5:44 PM, "Ken Hohhof" wrote: > A! > > What kind is that? > > *From:* Jaime Solorza > *Sent:* Friday, September

Re: [AFMUG] Stainless Bolts

You're in trouble. Might work to smear a little anti-seize on the threads (both sides). Otherwise get out the hack saw or some armstrong. bp On 9/11/2015 4:39 PM, Matt wrote: Is there a spray that can be used to loosen stainless bolts that are just starting to

Re: [AFMUG] Stainless Bolts

I think a good soak of penetrating oil (wd40, etc) should allow them to be removed, get some silicone bronze nuts and get the problem over for good On Fri, Sep 11, 2015 at 4:39 PM, Matt wrote: > Is there a spray that can be used to loosen stainless bolts that are >

Re: [AFMUG] Ok Josh. Happy now?

Best to hit it with a shovel... just in case. On Fri, Sep 11, 2015 at 6:50 PM, Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > Looks like some kind of orb weaver spider - they're pretty scary looking, > but I don't think they're particularly dangerous. > > On Friday, September 11,

Re: [AFMUG] LED colors and color blindness

I have two combinations commonly used on products that are difficult for me to differentiate. Yellow/green as some switches use to indicate 100meg vs 1gig. And red/orange as on the RB750UP look identical to me. The mikrotik FTC11 has a pretty unique combination that seems to work well. Its a

Re: [AFMUG] LED colors and color blindness

This is the solution. At least it works on monkeys... http://www.newsweek.com/cure-color-blindness-isnt-just-monkey-business-330258 bp On 9/11/2015 11:55 AM, Forrest Christian (List Account) wrote: A quick question for those who have problems distinguishing

Re: [AFMUG] 2.5Gbps lic symmetrical link

Hmm, First choice for me would be the new ptp820 series. Why no compression? Seems the 820 would do what you need with a 2+0 config running at max qam 2048 with multilayer compression should see around 1.6gbs one way 6 or 11ghz would work fine at 8mile On 9/11/2015 10:44 AM, Sorin Esanu

Re: [AFMUG] LED colors and color blindness

Color blindness is X-linked and supposedly 16 times as prevalent in males as females. Yet I find just as many women who can’t tell the difference between green and yellow LEDs as men. Oh, and Newsweek wanted me to subscribe. From: Bill Prince Sent: Friday, September 11, 2015 9:01 PM To:

Re: [AFMUG] Stainless Bolts

Go buy a nut splitter. -Original Message- From: Ken Hohhof Sent: Friday, September 11, 2015 6:21 PM To: af@afmug.com Subject: Re: [AFMUG] Stainless Bolts Yeah, it's probably sawzall time. But one thought comes to mind, I haven't tried this, but what about lock fluid that is like

Re: [AFMUG] 2.5Gbps lic symmetrical link

Would compression throw off a cell carrier's certification test? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From: "David Milholen" To: af@afmug.com

Re: [AFMUG] 4 hour spider viagra

No way ...ESE...after having millions well thousands well hundreds well too many daddy long legs on me in attic of Castle AFB I am big pussy when it comes to spiders On Sep 11, 2015 7:16 PM, "Chuck McCown" wrote: > That’s gotta be an agonizing 3 hours and 57 minutes. > > *From:*

Re: [AFMUG] 4 hour spider viagra

Amen brother On Fri, Sep 11, 2015, 9:15 PM Jaime Solorza wrote: > No way ...ESE...after having millions well thousands well hundreds well > too many daddy long legs on me in attic of Castle AFB I am big pussy when > it comes to spiders > On Sep 11, 2015 7:16 PM,

Re: [AFMUG] Ok Josh. Happy now?

Those will make you hurt yourself. I think we used to call them lemon spiders. I was walking in the woods once and turned around to talk to someone. When I turned back around I walked strict into one of those nose first. I must have blacked out cause when I got me senses back I was about a mile

Re: [AFMUG] UBNT vs ePMP Signal Strength?

The light is starting to burn thru :) On 09/10/2015 03:16 PM, tho...@fourway.net wrote: Did u turn the power up on the epmp ptp links or is it @ default. --- Original Message --- From: Josh Luthman[mailto:j...@imaginenetworksllc.com] Sent: 9/10/2015 3:53:39 PM To :

Re: [AFMUG] UBNT vs ePMP Signal Strength?

I would say use the Force 110 PTP radio as your AP, but you mention 2.4 GHz and the Force 110 PTP isn't in 2.4. - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com - Original Message - From:

Re: [AFMUG] Powering SAF Lumina Radio with CMM4

NEtonix FTW On Thu, Sep 10, 2015 at 9:58 PM, David Milholen wrote: > Currently the CMM4 doesnt support GigE > > I want my MTV! or CMM5 will do :) > > > On 9/10/2015 4:39 PM, Gilbert T. Gutierrez, Jr. wrote: > > I am trying to power a SAF Lumina Radio with a CMM4 and having

Re: [AFMUG] a new one, I think...

They do R56. Look at what companies with much more expensive equipment do. What do broadcast (AM\FM\TV) and cell companies do for their tower power\grounding? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com

Re: [AFMUG] a new one, I think...

Look at what companies with much more expensive equipment do. What do broadcast (AM\FM\TV) and cell companies do for their tower power\grounding? - Mike Hammett Intelligent Computing Solutions http://www.ics-il.com Midwest Internet Exchange http://www.midwest-ix.com -

Re: [AFMUG] a new one, I think...

There is a balancing point between the cost of the equipment and downtime and the cost of the ground system. I put an R56 system in for a broadcast station in Austin about 20 years ago. The ground system alone was $185K. We put in a copper flat mesh of 3,000 square feet tied to three 400 foot

[AFMUG] FS: APC SUA2200RMXL3U SMART-UPS 2200VA 1980W

I have this unit in the office. I got it used with no batteries. The unit is tested good. I have no use for anything of this size any more. I'd like to get any reasonable offer for it. I paid $350 including shipping. It's all boxes up and ready to go Fedex or UPS. Josh Luthman Office:

Re: [AFMUG] a new one, I think...

We purchased a hybrid cable from Best-tronics (I think) with a Black/Blue 14 AWG and 4 single mode fibers for something around $1.40 a foot pre-terminated. I think the difference Between 14 and 16 was a couple of pennies a foot. From 14 to 12 would be a bit more of a difference but not to bad I

[AFMUG] Stuff for sale! Check it out!

Let me know offlist if interested. Will entertain offers Antenna MTI MT-484032 5 ghz Sector Antennas V pol 3 used $25.00 Antenna UBNT AM5G16 5ghz Sector Dual pol+RF Armor 4 used $25.00 Antenna UBNT AM-V5G-TI 5ghz Sector Adjustable dual pol 1 used $50.00 Antenna PC Tel 85147240 5 ghz Sector

[AFMUG] Connect with Cambium at WISPAPALOOZA

See the latest technologies first Meet the developers and discuss the details 3:00 - 5:30 pm Oct 12 at the Rio in Las Vegas Register at http://bit.ly/1UHdwY9 Ray Join the Conversation Cambium Networks Community Forum

[AFMUG] 2.5Gbps lic symmetrical link

Hello, What vendors should we look at for setting up a symmetrical 2.5Gbps link at 8 miles? Without compression. Thank you! Sorin

Re: [AFMUG] 2.5Gbps lic symmetrical link

nice challenge! where? also, you will need to aggregate 3 GigE interfaces for this setup On Fri, Sep 11, 2015 at 11:44 AM, Sorin Esanu wrote: > Hello, > > What vendors should we look at for setting up a symmetrical 2.5Gbps link > at 8 miles? Without compression. > > Thank you! >

Re: [AFMUG] 2.5Gbps lic symmetrical link

desert, CA. we are aware about the aggregation and we are also looking for a solution there. as LAG is not going to work, we are looking at other options. So far, we found FortiWAN 3000B, which does the job, but the pricing is ... "amazing"

Re: [AFMUG] 2.5Gbps lic symmetrical link

you need to load balance via routing or mpls i would say 11ghz 4+0 using 80 mhz channels On Fri, Sep 11, 2015 at 11:54 AM, Sorin Esanu wrote: > desert, CA. > we are aware about the aggregation and we are also looking for a solution > there. as LAG is not going to work, we are

Re: [AFMUG] Stuff for sale! Check it out!

What's the story on Radwin...subpar? Sent from my iPhone > On Sep 11, 2015, at 10:37 AM, Gino Villarini wrote: > > Let me know offlist if interested. Will entertain offers > > > > > Antenna MTI MT-484032 5 ghz Sector Antennas V pol 3 > used