We will get sync over power too, right?
On 3/16/2015 2:09 PM, John Butler wrote:
The plan is that there will be a software upgrade that will allow you to enable
GPS Sync mode of operation, but only in the PTP configuration – that is one
“SM” connected. You will not need to purchase a license key
, March 16, 2015, John Butler
john.but...@cambiumnetworks.commailto:john.but...@cambiumnetworks.com wrote:
The plan is that there will be a software upgrade that will allow you to enable
GPS Sync mode of operation, but only in the PTP configuration – that is one
“SM” connected. You will not need
The plan is that there will be a software upgrade that will allow you to enable
GPS Sync mode of operation, but only in the PTP configuration – that is one
“SM” connected. You will not need to purchase a license key to enable that.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George
We plan to enable GPS Sync for a single “SM” connected (i.e. a PTP link) in a
software update coming in the near future.
It will be a software update to any Force 110 PTP radios that have been
purchased.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup (Cyber
Broadcasting)
2 ms is without sync
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Mike Hammett via Af
Sent: Wednesday, November 19, 2014 8:12 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Force
The 2 ms is with or without sync on 2.4?
-
Mike Hammett
Intelligent Computing Solutions
kind
of latency will we get?
On Fri, Oct 24, 2014 at 2:56 PM, John Butler via Af
af@afmug.commailto:af@afmug.com wrote:
Hi George: I want to clear up your questions about the Force product.
The Force 110 (C058900C042A (FCC)) is as the spec sheet describes - a radio
module and the dish. You can
not offer a
radome for it at this time.
The Force 110 PTP is the same dish, but bundled with the radio that we also
use for the GPS Sync AP. The GPS is turned off. The benefit of this radio
over the Force 110 is the 802.3af compliant gigabit Ethernet port.
Regards,
John Butler
From: Af
other issues.
John Butler
Cambium Networks
From: Af [mailto:af-bounces+john.butler=cambiumnetworks@afmug.com] On
Behalf Of Mike Hammett via Af
Sent: Wednesday, September 24, 2014 11:52 PM
To: af@afmug.com
Subject: Re: [AFMUG] Cambium Force 100 - Dysfunctional Rube Goldberg
The dish can only
Greg: 10 MHz Channel support is coming in the next software release (R2.3).
That will be for both 5 and 2.4 GHz. We expect to officially release it before
the end of October and open it up for beta 2 - 3 weeks prior to then.
Regards,
John Butler
Cambium Networks
From: Af [mailto:af-bounces