[AFMUG] another test

Testing, sent @ 12:25pm EDT 6/6/2018

[AFMUG] test

test

[AFMUG] test

test

Re: [AFMUG] Mikrotik: Making usre X bandwidth is available for a given device

time. 4devices x15Mbs = 90Mbs 10Dx15M= 150M PCC with Ques can do this for sure. I use butch evans QOSbase3 for this at a couple Large hotels and have no complaints On 04/18/2018 12:30 PM, Justin Marshall wrote: Hi, � I have a customer with a 120M/120M connection.� This is for a church

Re: [AFMUG] Mikrotik: Making usre X bandwidth is available for a given device

ww.towercoverage.com From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> On Behalf Of Justin Marshall Sent: Wednesday, April 18, 2018 12:30 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Mikrotik: Making usre X bandwidth is available for a given device H

Re: [AFMUG] Mikrotik: Making usre X bandwidth is available for a given device

be more complicated. Jesse DuPont Network Architect email: jesse.dup...@celeritycorp.net<mailto:jesse.dup...@celeritycorp.net> Celerity Networks LLC Celerity Broadband LLC Like us! facebook.com/celeritynetworksllc Like us! facebook.com/celeritybroadband [cid:image002.png@01D3D71C.CFF59270] O

[AFMUG] Mikrotik: Making usre X bandwidth is available for a given device

Hi, I have a customer with a 120M/120M connection. This is for a church that usually has 100-250 users on wifi at any given time. I need to make sure that at least 15M/15M is available at all times for a given streaming device, but I also want to make sure any wifi users have full access to

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

a USB2.0 hub between them will fix it. On Wed, Mar 28, 2018 at 7:54 AM, Justin Marshall <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: Can you recommend a particular model of APC (preferably cheap) that works over USB to a Mikrotik 2011? I’ve tested with a couple older

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

batteries for longer runtime. Jason Jason Wilson Remotely Located Providing High Speed Internet to out of the way places. 530-651-1736 Office 530-748-9608 Cell www.remotelylocated.com<http://www.remotelylocated.com> On Mar 27, 2018, at 10:47 AM, Justin Marshall <just...@pdmnet.net<

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

I googled Mikrotik + APC, and came across https://wiki.mikrotik.com/wiki/Manual:System/UPS I think I see what you’re saying From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Tuesday, March 27, 2018 2:06 PM To: af@afmug.com Subject: Re: [AFMUG] Cheap consumer level SNMP

Re: [AFMUG] Cheap consumer level SNMP capable UPS?

usually add external batteries for longer runtime. Jason Jason Wilson Remotely Located Providing High Speed Internet to out of the way places. 530-651-1736 Office 530-748-9608 Cell www.remotelylocated.com<http://www.remotelylocated.com> On Mar 27, 2018, at 10:47 AM, Justin Marshall

[AFMUG] Cheap consumer level SNMP capable UPS?

Hi, Does anyone know of any cheap consumer level UPS's that can be monitored via SNMP over ethernet? Something non-rack mountable and that doesn't require external batteries? Everything I find wants to be monitored through USB with proprietary programs like Powerchute, etc... Thanks, Justin

[AFMUG] testing

testing

[AFMUG] test

test

[AFMUG] testing

testing

[AFMUG] PMP 320 SM Power Supply

Hi, Does anyone know which POE standard the 320 SM is in compliance with? 802.3af/ad/at/etc? Thanks, Justin

Re: [AFMUG] NetFlow Analyzers

at all but I do want to take a look at it now. -- Steven Kenney Network Operations Manager WaveDirect Telecommunications http://www.wavedirect.net (519)737-WAVE (9283) - Original Message - From: "Justin Marshall" <just...@pdmnet.net> To: "af" <af@afmug.co

[AFMUG] NetFlow Analyzers

Hi, Does anyone know of a good (preferably open-source) NetFlow analyzer? Ntop's pricing scheme seems to be a little steep for the amount of data I need to collect... Thanks, Justin just...@pdmnet.net

[AFMUG] Mimosa B5 Lite Power Options

Hi, Does anyone know if the Mimosa B5 Lite can be powered with 24v? Thanks, Justin

Re: [AFMUG] Strange OSPF problem

e was the OSFP messages are sent unicast, but a few goofy things stopped happening when I did that. -- Original Message -- From: "Justin Marshall" <just...@pdmnet.net<mailto:just...@pdmnet.net>> To: "af@afmug.com<mailto:af@afmug.com>" <af@af

[AFMUG] Strange OSPF problem

Hi, I have an odd situation with OSPF. There are 2 towers (Tower A and Tower B) and a NOC involved that feeds both towers. Tower A is directly connected to the NOC via Mikrotik Backhaul. Tower B is directly connected to the NOC via Fiber. Tower B is connected to Tower A via Fiber. When tower

Re: [AFMUG] UBNT S16 SNMP or Net::Telnet ....

Nevermind. Figured it out using $ssh->shell() and $ssh->write in lieu of $ssh->exec Thanks, Justin From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Thursday, November 10, 2016 2:20 PM To: af@afmug.com Subject: Re: [AFMUG] UBNT S16 SNMP or Net::Telnet Ta

Re: [AFMUG] UBNT S16 SNMP or Net::Telnet ....

af@afmug.com Subject: Re: [AFMUG] UBNT S16 SNMP or Net::Telnet Try Net:SSH2 not just Net::SSH On Mon, Nov 7, 2016 at 2:43 PM, Josh Reynolds <j...@kyneticwifi.com<mailto:j...@kyneticwifi.com>> wrote: Do it via ansible / ssh. On Nov 7, 2016 2:41 PM, "Justin Marshall"

Re: [AFMUG] UBNT S16 SNMP or Net::Telnet ....

et Does it support straight Telnet? Have you tried Net::SSH2? On Mon, Nov 7, 2016 at 1:46 PM, Justin Marshall <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: Hi, I’m looking for the SNMP OID’s for POE config on the UBNT EdgePoint S16. Specifically the ones that wou

[AFMUG] UBNT S16 SNMP or Net::Telnet ....

Hi, I'm looking for the SNMP OID's for POE config on the UBNT EdgePoint S16. Specifically the ones that would let you disable/enable passive24v on a specific port. I tried an snmpwalk, but without a MIB there's a lot to dig through. I actually found a thread on UBNT's forums that say you

Re: [AFMUG] EPMP 1000 SM looping ethernet port after Storm

: [AFMUG] EPMP 1000 SM looping ethernet port after Storm Did they take back the failed radio and were still unable to reproduce? On 11/3/2016 11:44 AM, Justin Marshall wrote: > I've seen this issue multiple times > > FWIW, the SM isolation did not help in my experiences with this issue

Re: [AFMUG] EPMP 1000 SM looping ethernet port after Storm

I've seen this issue multiple times FWIW, the SM isolation did not help in my experiences with this issue I've even opened a ticket with cambium, but they say they are unable to re-produce the issue -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Nate Burke Sent:

[AFMUG] 430 Series - 5.4 vs 5.7

Hi, On the 430 series, does the 5.4 frequency have limitations as far as power vs the 5.7 frequencies? Thanks, Justin

Re: [AFMUG] EdgePoint S16

I think I found the answer… I enabled “Routing Mode” on the port and the IP started pinging. I can no longer make this interface untagged for a given VLAN though… Wish there was a way to do both… From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Tuesday, April 12, 2016

Re: [AFMUG] EdgePoint S16

n Apr 12, 2016 8:49 AM, "Justin Marshall" <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: Tried that too… Still can’t ping it From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Josh Reynolds Sent: Tuesday, April 12, 2016 9:46 AM

Re: [AFMUG] EdgePoint S16

Tried that too… Still can’t ping it From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Tuesday, April 12, 2016 9:46 AM To: af@afmug.com Subject: Re: [AFMUG] EdgePoint S16 Make sure it's got an untagged vlan assigned to it On Apr 12, 2016 8:43 AM, "Justin Marshall&qu

[AFMUG] EdgePoint S16

Hi, I have an Edgepoint S16, and have an IP address assigned directly on one of the interfaces done through Routing->IP->Interface Configuration. However, I am unable to reach that IP when directly connected to that interface through a laptop. I can still reach the IP Address assigned

[AFMUG] AF-5x Power Requirements

Hi, I need to power an AF-5x with a ~20' Cable run. Is this possible from an EdgePoint R6 or would I need the S16? Thanks

[AFMUG] 450 900Mhz AP Power supply

Hi, Does anyone happen to know offhand what power supply is needed for the 900Mhz 450 AP? Only thing google seems to have a definitive answer on (maybe I'm missing it) is the SM needing 30V, and the back of the AP itself says 55V / 1.1A Thanks Justin

[AFMUG] Rocket M365 Intermittent Ping Issue

Hi, I have a Rocket M365 (XM) link (used as a backhaul) that pings very intermittent unless the link is actually being used. Pings are intermittent on the AP side from the router. It would seem like an Ethernet issue, but if I shut off the main link to the tower and actually utilize this

Re: [AFMUG] AirFiber 5x Frequencies

AF06.v3.0.2.1 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck Macenski Sent: Tuesday, October 13, 2015 3:46 PM To: af@afmug.com Subject: Re: [AFMUG] AirFiber 5x Frequencies What software release are you running? On Tue, Oct 13, 2015 at 2:29 PM, Justin Marshall <just...@pdmnet.

Re: [AFMUG] AirFiber 5x Frequencies

frequencies From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Tuesday, October 13, 2015 3:52 PM To: af@afmug.com Subject: Re: [AFMUG] AirFiber 5x Frequencies AF06.v3.0.2.1 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck Macenski Sent: Tuesday, October 13, 2015 3

Re: [AFMUG] AirFiber 5x Frequencies

how it works. Secondary and tertiary are for DFS. Chuck said it won't be necessary for 5.1 and 5.7 sometime. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 13, 2015 11:04 AM, "Justin Marshall" <just...@pdmnet.net<mailto:just..

[AFMUG] AirFiber 5x Frequencies

Hi, Just wondering what everyone else is doing as far as AirFiber 5x frequencies... In the newest firmware, It has a spots for 3 frequencies. Their user guide only says it should have an option for a separate tx and rx frequency. I've done a quick search of the UBNT forums and I haven't found

Re: [AFMUG] AirFiber Link Calc

-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Oct 12, 2015 12:48 PM, "Justin Marshall" <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: Hi, Trying to run a link calc for a new AirFiber 5x link we are putting up. UBNT’s link calculator tops out at 27 on the tx po

Re: [AFMUG] AirFiber Link Calc

radios, only the 5Ghz. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Monday, October 12, 2015 1:49 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] AirFiber Link Calc Hi, Trying to run a link calc for a new AirFiber 5x link we are putting up. UBNT'

Re: [AFMUG] AirFiber Link Calc

, but this is a 2' Rocket dish at one end and a 25dbi Force110 dish at the other. You're going to be limited to 49db EIRP at 5225. [cid:image001.jpg@01D1050F.710F2000] ​. On Mon, Oct 12, 2015 at 2:57 PM, Justin Marshall <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: UBNT

Re: [AFMUG] AirFiber Link Calc

, 2015 at 4:00 PM, Justin Marshall <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: Probably a dumb question, but… How are you getting to 49? Mine maxes out at 44 on 5225… From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Mathew Howard Sent:

Re: [AFMUG] AirFiber Link Calc

out of band emmisions rules work. On Mon, Oct 12, 2015 at 5:10 PM, Justin Marshall <just...@pdmnet.net<mailto:just...@pdmnet.net>> wrote: I would think if you increase the dbi of the antennae, it would lower the EIRP? Been a long day, maybe I have that backwards? From: Af [mai

Re: [AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade

To: af@afmug.com Subject: Re: [AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade -89 is not a "usable" power level IMO. bp <part15sbs{at}gmail{dot}com> On 10/7/2015 12:57 PM, Justin Marshall wrote: Hi, � � I recently updated a UBNT Rocket M5 to 5.6.2 f

Re: [AFMUG] Mikrotik Bridge Issue (intermittent pings to devices)

I also should add, If I run a /tool torch on that bridge, it clears the issue up also (no lost pings to any of the devices on that bridge) Also forgot to mention that the RB2011 is running 6.30.2 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Thursday, October

[AFMUG] Mikrotik Bridge Issue (intermittent pings to devices)

Hi, I have an RB2011 with a bridge. Today everything on the bridge decided to randomly start losing pings. Someone had suggested a while back on a similar issue, that copying a mac address from an Ethernet port on the bridge, and pasting it into the "Admin MAC Address" section of the bridge

Re: [AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade

Sorry, That should have read: This AP originally had 6 SM's connected at 5690 From: Af [mailto:af-boun...@afmug.com] On Behalf Of Justin Marshall Sent: Wednesday, October 07, 2015 3:57 PM To: af@afmug.com Subject: [AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade Hi, I recently

[AFMUG] Client can't connect since UBNT 5.6.2 Firmware upgrade

Hi, I recently updated a UBNT Rocket M5 to 5.6.2 from 5.5.4. Since this update, one of the clients will not connect. This AP originally had 6 SM's connected at 5490. After the upgrade from 5.5.4 to 5.6.2, 2 of the SM's didn't come back. These 2 were not at the best signal (-86 and -89).

Re: [AFMUG] 320SMs on Alvarion software

I was able to get it out of .pkg3 format by grabbing the file via ftp while CNUT was upgrading the CPE However, now when I upload the Image file to the SM; I get a “Bimage Customer ID Error!” And it’s asking me for: Hardware ID: Firware Version: Filesize: From: Af

[AFMUG] PMP320

Hi, I have a few 320SM's with Alvarion Firmware on them. (R4.6.2.4-29146-v7.0.8ALV) Trying to get them back on Cambium firmware. (8.1.4) With CNUT I get a Error Transferring Files, Connect to FTP Server Failed. I'm guessing because either the username/password, or the SNMP community isn't