Omnitik ac with poe out comes with 28V ...
Ursprüngliche Nachricht
Von: Mathew Howard Datum:
03.11.17 15:49 (GMT+01:00) An: af
Betreff: Re: [AFMUG] Mikrotik Powerbox Short Circuit Message
ot;poe-in-long-cable=yes"?
>
>
> -- Original Message --
> From: "Matt Hoppes"
> To: af@afmug.com
> Sent: 11/2/2017 8:36:43 PM
> Subject: Re: [AFMUG] Mikrotik Powerbox Short Circuit Message
>
> It's the input cable that's the issue.
>
> It
regular powerbox have that setting and powerbox pro do not have that settings
anymore its automatically turned on.
-Original Message-
From: "Adam Moffett"
To: af@afmug.com
Date: 11/03/17 10:24
Subject: Re: [AFMUG] Mikrotik Powerbox Short Circuit Message
There must be a
There must be a purpose to this setting, but I don't grasp what it would
be.
Is there any reason not to always have "poe-in-long-cable=yes"?
-- Original Message --
From: "Matt Hoppes"
To: af@afmug.com
Sent: 11/2/2017 8:36:43 PM
Subject: Re: [AFMUG] Mikrot
> From: "Matt Hoppes" >
> To: af@afmug.com
> Date: 11/02/17 08:36
> Subject: Re: [AFMUG] Mikrotik Powerbox Short Circuit Message
>
> It's the input cable that's the issue.
>
> It's stupid.
>
>
> /interface ethernet poe settings set ether1-p
. You probably need to
use the 48v power supply from miktroik.
-Original Message-
From: "Matt Hoppes"
To: af@afmug.com
Date: 11/02/17 08:36
Subject: Re: [AFMUG] Mikrotik Powerbox Short Circuit Message
It's the input cable that's the issue.
It's stupid.
Yep, what Matt said... that setting will more than likely fix it.
On Thu, Nov 2, 2017 at 7:36 PM, Matt Hoppes <
mattli...@rivervalleyinternet.net> wrote:
> It's the input cable that's the issue.
>
> It's stupid.
>
>
> /interface ethernet poe settings set ether1-poe-in-long-cable=yes
>
> On Nov 2,
It's the input cable that's the issue.
It's stupid.
/interface ethernet poe settings set ether1-poe-in-long-cable=yes
> On Nov 2, 2017, at 20:07, Jason McKemie
> wrote:
>
> That is a royal pain if I went through all of that for a setting. The strange
> thing is that the output port is the
That is a royal pain if I went through all of that for a setting. The
strange thing is that the output port is the short cable at about 3', the
input is about 80'.
On Thursday, November 2, 2017, Matt Hoppes <
mattli...@rivervalleyinternet.net> wrote:
> There's some setting somewhere about long di
at
> switch mode regulator fold over region that I pontificated upon with all
> the math formulas a while back.
>
> *From:* Jason McKemie
> *Sent:* Thursday, November 02, 2017 5:09 PM
> *To:* af@afmug.com
> *Subject:* [AFMUG] Mikrotik Powerbox Short Circuit Message
>
> I&
There's some setting somewhere about long distance PoE short detection that
needs to be turned off. Royal pain.
> On Nov 2, 2017, at 19:09, Jason McKemie
> wrote:
>
> I've got a powerbox causing me grief. It works fine powering a Baicells CPE
> on the bench, but when I put it in place with 8
Hmm...Is the Baicells thing 24v or 48v? I think at 48v it took an
excessive amount of cable or excessive current to have a problem.
-- Original Message --
From: "Chuck McCown"
To: af@afmug.com
Sent: 11/2/2017 7:22:20 PM
Subject: Re: [AFMUG] Mikrotik Powerbox Short Circu
, November 02, 2017 5:09 PM
To: af@afmug.com
Subject: [AFMUG] Mikrotik Powerbox Short Circuit Message
I've got a powerbox causing me grief. It works fine powering a Baicells CPE on
the bench, but when I put it in place with 80' of cable between it and the
power supply I get a short circu
I've got a powerbox causing me grief. It works fine powering a Baicells CPE
on the bench, but when I put it in place with 80' of cable between it and
the power supply I get a short circuit message when trying to power up the
Baicells. I've tried a new jumper between the powerbox and the Baicells,
n
14 matches
Mail list logo
