On 6/2/15 15:41, Ken Hohhof wrote:
Just make sure it isn’t a faux parapet, just for show or to hide the
ugly stuff on the roof.
Attaching part of a 6' antenna to it will surely give you that answer, too.
~Seth
Just make sure it isn’t a faux parapet, just for show or to hide the ugly stuff
on the roof.
From: Sam Lambie
Sent: Tuesday, June 02, 2015 2:37 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mounting a 6 foot dish on a Non Pen.
This install is on a roof next to a parapet so mounting a stiff arm to
This install is on a roof next to a parapet so mounting a stiff arm to the
parapet will probably be the way to go. Thanks for the info guys, most
helpful.
On Mon, Jun 1, 2015 at 7:48 PM, Erich Kaiser
wrote:
> Rohn 25 would not work, you would be better off with 4.5" 15ft pipe
> non-pen and a sep
en
> 6 ft dishes, the links might have completely dropped.
>
>
> *From:* Erich Kaiser
> *Sent:* Monday, June 01, 2015 8:48 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Mounting a 6 foot dish on a Non Pen.
>
> Rohn 25 would not work, you would be better off with 4.5
-tensioned, and both dishes
took big hits in signal until they were re-aimed. If they had been 6 ft
dishes, the links might have completely dropped.
From: Erich Kaiser
Sent: Monday, June 01, 2015 8:48 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mounting a 6 foot dish on a Non Pen.
Rohn 25 would not
Rohn 25 would not work, you would be better off with 4.5" 15ft pipe non-pen
and a separate non-pen for stiff arm, it would need to be angled toward the
weight of the non-pen. I have a non-pen with 15ft 4.5" pipe, just cant
remember brand name at this moment. Are you mounting on a roof or anywhere
I'd maybe look at something from Baird instead:
https://www.bairdmounts.com/products/wireless
They have some big beefy non-pen mounts that will hold some pretty good
sized antennas, all engineered, etc.
On Mon, Jun 1, 2015 at 1:34 PM, Sam Lambie wrote:
> Hey all,
>
> I am looking to mount a
Hmm the tower idea is a not bad. I have a ROHN 25 sitting in the back. I
could make a sled for it. Would a 25 work? Or is it too flimsy?
On Mon, Jun 1, 2015 at 2:01 PM, Justin Wilson - MTIN wrote:
> You need an actual 10 foot tower. You could engineer that to be non
> penetrating. The dish nee
You need an actual 10 foot tower. You could engineer that to be non
penetrating. The dish needs a stabilizer arm to tie back to something.
Otherwise you will be visiting it often. If it’s licensed a 1 degree movement
could mean the difference between a -60 and a -70. You could do something
Sent: Monday, June 1, 2015 1:47 PM
To: af@afmug.com
Subject: Re: [AFMUG] Mounting a 6 foot dish on a Non Pen.
on our 4' dish we had planned on using angle iron vertically in one corner of
the tray with struts going down to the two corners left and right for attaching
the stabilizer if we ne
on our 4' dish we had planned on using angle iron vertically in one corner
of the tray with struts going down to the two corners left and right for
attaching the stabilizer if we needed it
On Mon, Jun 1, 2015 at 2:34 PM, Sam Lambie wrote:
> Hey all,
>
> I am looking to mount a 6' dish on a 10' t
Hey all,
I am looking to mount a 6' dish on a 10' tall mast (4 1/2" OD) at the top
of the mast with something like this:
https://www.tessco.com/products/displayProductInfo.do?sku=504727
Using a Cinderblock tray as the base.
My question is, would this work? And how would I keep the dish from
twist
12 matches
Mail list logo