We use Altech Corp CBI243A:
http://www.alliedelec.com/altech-corp-cbi243a/70236398/
We're in a cool climate and the box is in a shaded area so we haven't
put vent/fans in (yet). Probably a good idea to do so just to be
safe.
-Rob
On Fri, May 6, 2016 at 5:20 AM, Christopher Gray
Rob,
What are you using for your charger?
--
On Wed, May 4, 2016 at 7:21 PM, Rob Genovesi wrote:
> Netonix switches have been great for us. We're using the DC model
> with a few batteries for backup. The Netonix takes 9-60 VDC in and
>
No ventilation for that enclosure? Those Netonix are only rated for +55C*
-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rob Genovesi
Sent: Thursday, May 5, 2016 01:22
To: af@afmug.com
Subject: Re: [AFMUG] Routed Gigabit Micro Repeater (Mimosa hardware)
Netonix
The new Edgepoints could do the job too.
On May 5, 2016 1:40 PM, "Josh Reynolds" wrote:
> Just make sure it has a 48v power supply, or get one for it. I can't
> remember if they changed that after the first few packaging runs or
> not, but originally they only came with 24v
Just make sure it has a 48v power supply, or get one for it. I can't
remember if they changed that after the first few packaging runs or
not, but originally they only came with 24v power supplies (thus no
optional 48v output).
On Thu, May 5, 2016 at 1:09 PM, Christopher Gray
Any reason to avoid the EdgeRouter PoE? After some further checking, it
seems like that unit would do both the routing and PoE for a lower cost
taking up less space (than a MikroTik combined with Netonix).
I also found the Tycon Mid-span 4-port injector at a very reasonable price,
but the cost of
Packetflux...
On Wed, May 4, 2016 at 6:21 PM, Rob Genovesi wrote:
> Netonix switches have been great for us. We're using the DC model
> with a few batteries for backup. The Netonix takes 9-60 VDC in and
> can output 24V or 48V (configurable by port). Perfect for
Netonix switches have been great for us. We're using the DC model
with a few batteries for backup. The Netonix takes 9-60 VDC in and
can output 24V or 48V (configurable by port). Perfect for powering a
24V Mikrotik and a few 48V radios.
-Rob
On Wed, May 4, 2016 at 3:02 PM, Christopher Gray
Netonix
On Wed, May 4, 2016 at 5:02 PM, Christopher Gray
wrote:
> For my routed 100 Mbps micro repeater sites I've been running MikroTik
> RB750P routers for both routing traffic and powering radios (With good
> results).
>
> I want to setup my first small routed 1
For my routed 100 Mbps micro repeater sites I've been running MikroTik
RB750P routers for both routing traffic and powering radios (With good
results).
I want to setup my first small routed 1 Gbps repeater site using 2x B5
backhaul links and 1x A5 PtMP. What are others using to run a small routed
10 matches
Mail list logo