[Alsa-user] alsa 0.9.1 and via82xx

i just downloaded the new version of alsa. sound from line is ok, i lost sound from the CD, and i still receive the continual looping over a small segment of sound. using aplay produces aplay: pcm_write:1025: write error: Input/output error. mark mueller wrote something like Set to ALSA as th

[Alsa-user] ymfpci not recording

Hi, if someone could give me a hand on this, it'd be great!   I'm running Gentoo linux, the kernel is 2.4.19rc2 and I believe (I'm not at home so I can't quickly check) that I have alsa 0.9.0_rc6 in there.  My sound card is a ymf 724 (F I think, but I forget the letter), so I"m running the y

Re: [Alsa-user] How do I use the second wave channel of a Via686?

Are you sure my onboard audio doesn't have a second channel? I'm almost certain I had disabled the virtual mixer. Also the volume slider appeared on the same device as the Via686, the virtual mixer normally has its own mixer device. Also they seem to be talking about it here: http://www.kernelnewbi

Re: [Alsa-user] modprobe failure

i'm a newbie, but i think i got this error once when 1. my modules.conf already loaded a previous alsa-driver at bootup 2. i compiled a new alsa driver and then modprobe'd the new driver without removing the modules... 3. i tried to use a script to remove the modules but i'm not sure it worke

[Alsa-user] CS4201 / 440MX

Hello, Just wondering if anyone has this combination of hardware working with Linux sound. It seems to work with RH 6.2 (also works with BeOS !?) However RH7.3 and RH8.0 do not work after the installation. I have compiled the latest (?) alsa-xxx-0.9.0rc8b (for xxx = driver, utils, lib) and creat

Re: [Alsa-user] CS4235/4236 Module

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Uhm, this will also be an obvious one but one that is often forgotten. > But no sound comes out. I've checked all my cabling, yadda yadda yadda... > the speakers check out on another PC... everything loads fine, hardware's > all good, but I get no so

[Alsa-user] CS4235/4236 Module

I've got a module-specific question. I'm new to the list, and am working on possibly moving off Win32 altogether to KDE3 on SuSE 8... sound seems to be my only bug at the moment. Here's the problem: The system boots just fine, no error or failure messages. I've checked the boot log, the message l

[Alsa-user] problems with snd-ali5451

Hi! I'm new to the list (and a new alsa user too). I've decided to use alsa because the default driver (trident) for my sigmatel STAC9766/67 audio card doesn't work fine: The volume is fixed and it is very low, even though changing the mixer values. I had lots of problems to use snd-ali5451

Re: AW: [Alsa-user] (Still) Problems with VIA8233

comments inline... On Tue, 2003-03-11 at 11:55, Takashi Iwai wrote: > At 11 Mar 2003 11:40:56 -0600, > Edward Muller wrote: > > > > I am currently running a cvs version of also from a week ago...Sometime > > after rc8 IIRC. > > > > Here are my problems: > > > > -OSS emulation is pretty much bro

[Alsa-user] modprobe failure

# modprobe snd-emu10k1 /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.20/kernel/sound/pci/emu10k1/snd-emu10k1.o: insmod /lib/modules/2.4

Re: AW: [Alsa-user] (Still) Problems with VIA8233

At 11 Mar 2003 11:40:56 -0600, Edward Muller wrote: > > I am currently running a cvs version of also from a week ago...Sometime > after rc8 IIRC. > > Here are my problems: > > -OSS emulation is pretty much broken. This is my biggest problem since a > lot of app (esound, the kde rpms I am using,

[Alsa-user] ice1712 rate locking problem

Hi, My Delta44 keeps getting locked at 48000Hz. I know that under windows, I can lock the rate down and free it up, but I'm having trouble doing that with ALSA for some reason: envy24control doesn't seem to have a control for this. BTW, what is that "Volume Rate" control? alsamixer shows a slide

Re: AW: [Alsa-user] (Still) Problems with VIA8233

I am currently running a cvs version of also from a week ago...Sometime after rc8 IIRC. Here are my problems: -OSS emulation is pretty much broken. This is my biggest problem since a lot of app (esound, the kde rpms I am using, realplayer, etc) use oss. -When cpu usage spikes any playback someti

Re: [Alsa-user] XFire 1024 (module cs46xx) sounds bad since ALSA-driver >= rc3

> About "DC-OFFSET" problem: > When I using driver rc2 to record, I get "DC-OFFSET" distorted record > sometimes, and I can't know when the "DC-OFFSET" distortion will happen. Here are two mp3s that are record from MIC with driver rc2. http://163.23.24.15/~denis/temp/rpi1.mp3 (Distortion. D

Re: [Alsa-user] XFire 1024 (module cs46xx) sounds bad since ALSA-driver >= rc3

> > It sounds well with ALSA-driver rc2 but distortedly with driver >= rc3 > > Try restarting the driver after it gets first loaded. Appearantly some XFire > 1024 Boards don't get initialized properly the first time. This subject comes > up here on regular basis but nobody seems to have a clue why

Re: [Alsa-user] XFire 1024 (module cs46xx) sounds bad since ALSA-driver >= rc3

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 > It sounds well with ALSA-driver rc2 but distortedly with driver >= rc3 Try restarting the driver after it gets first loaded. Appearantly some XFire 1024 Boards don't get initialized properly the first time. This subject comes up here on regular ba

Re: [Alsa-user] Turtle Beach Santa Cruz and MIDI using ALSA0.9_RC 8

Craig Williamson (ENZ) wrote: > pmidi is complaining of no sequencer file found. Does the file /dev/snd/seq exist? Is the snd-seq module loaded? If not: does it work after "modprobe snd-seq"? > The ALSA docs talked about snd-cmipci as an option to get MIDI > working, but I tryed that also a

Re: [Alsa-user] make failure

On Tue, Mar 11, 2003 at 01:47:05AM -0500, Dave Edwards wrote: > Compiling alsa-lib-0.9.0rc8b fails with: > > pcm_jack.c:36:23: jack/jack.h: No such file or directory Fixed since rc8c. Try a newer release or CVS. martin --- This sf.net email