Krishan veer wrote:
I turned volumes on on the different channels including IEC958 and
Input Monitor IEC958 Playback AC97-SPSA.
The SPSA control is not a volume control, it selects which AC'97
slot to use for SPDIF output.
0 selects the front channels of the first PCM device (hw:0,0), but you
nForce wrote:
When attempting to access the sequencer device this is returned:
stormbox linux # cat /dev/sequencer
cat: /dev/sequencer: No such device or address
This device file is not intended to be accessed directly. What are
you trying to do?
Regards,
Clemens
Christopher Moore wrote:
Still can't record. I get the following error:
pcm_read:1169 input/output error
There is no data arriving from the device. Probably an interrupt
problem. Try disabling ACPI and/or the local APIC.
HTH
Clemens
Hi All
has anyone here read this article (and the related slashdot posting):
http://www.informationweek.com/story/showArticle.jhtml?articleID=18901660
http://slashdot.org/article.pl?sid=04/04/19/2122202mode=nestedtid=106tid=185tid=190
I suppose this summarizes the problem that causes so many
Hi
I am using a Yamaha EZ-250i keyboard as a midi input device and have
the following issues:
System 1.
Mandrake 10 - Alsa 1.0.2 on IBM Thinkpad T21.
The keyboard is immediately recognized and I can use it as a midi
device. However, when I try to reboot my laptop, ALSA never shuts down
and
Jeff Gazdacko wrote:
My understanding is that this midi interface has been labed as
testing in the ALSA supported hardware list for some time now.
This entry hasn't been updated for quite some time now.
I'm considering upgrading to a MOTU midi time piece AV (MPT AV)
and installing linux on
ocset wrote:
The keyboard is immediately recognized and I can use it as a midi
device. However, when I try to reboot my laptop, ALSA never shuts down
and the machine can only be re-booted with the on-off switch.
Which kernel version?
Which modules are loaded?
What happens when you try to
Hi,
First some good news. Output through arts does work with dshare and dmix.
Using this .asoundrc I get distorted sound. I sounds somewhat granulated. A
bigger buffersize lowers the frequency of occurence of the clicks. If I use
dshare, output works flawlessly.
pcm.ice1712 {
type hw
Hi,
I have an Auron Space card 7.1 witch uses the ice_1724 driver.
Sound is working with most application, but now I wanted
all 8 channels to work, so searched around and found a config
on this list. I get sound from all 8 channels. Now I wanted applications
to produce sound simultaniously and
Clemens Ladisch wrote:
ocset wrote:
The keyboard is immediately recognized and I can use it as a midi
device. However, when I try to reboot my laptop, ALSA never shuts down
and the machine can only be re-booted with the on-off switch.
Which kernel version?
2.6
Hi all,
I have a SoundBlaster Live! (value, I guess), kernel 2.4.23 and
alsa-1.0.0rc1 (I should upgrade, I know). I have recently acquired a
Roland MT-32 sound module and I'm trying to connect the soundcard to
it.
Connecting an electric piano to the MT-32, I can get the midi messages
in the
Hi folks,
Had my first stab at getting an HDSP + Multiface up and running today.
No dice. Here's what I did:
1. Downloaded the latest ALSA sources, libs and utils (1.0.4)
2. Followed the instructions for the HDSP card off the alsa site,
configuring and installing as necessary
3. Created
12 matches
Mail list logo