Here's the message I posted a couple of weeks ago with my configuration:
I am trying to get an M-Audio Audiophile 2496 fully operational.
I cannot seem go get the envy24control to mix the SPIDF input. I can
patch it to HW 1 2 Out fine, but when I route via the mixer there is
no sound. I can
On Mon, 31 May 2004, Darrell Blake wrote:
pcm.48000Hz {
Please don't use a device name beginning with a digit, this may be
interpreted as a number by some programs.
Is it possible to set the default ALSA device?
pcm.!default = NX48000Hz
HTH
Clemens
I've been testing Fedora Core 2 to see if ALSA recognizes my
Intel 82801 sound hardware as a full duplex capable device.
Yippe, it does. BUT...
It seems as though some configuration within ALSA, somewhere...
Is adding/mixing the sound that is being written to the speaker
into the input stream
On Mon, May 31, 2004 at 11:22:10 +0200, Dominique Dumont wrote:
Philipp Morger [EMAIL PROTECTED] writes:
No AC3/DD sound: I have never been under any circumstances been able to
play AC3/DD sound... best is getting an ugly sound that worst case
blows my sound system
I've never been
On Tue, 2004-06-01 at 02:17, Darrell Blake wrote:
P.S. I like your name =o)
Three Darrell B's. Wow! What are the odds?
Darrell Bellerive
---
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the
Philipp Morger wrote:
I get the red, I also switched the optical in to the dvd input (thought
it mattered, because I use the LD input), but it doesn't make a
difference.
I read that's because the audio bit is set, but when I manualy
override the bit with the iecset command it still shows as red
hi i'm a newbie, and i've a question that i can't resolve:
i have compiled a 2.4.23 kernel with pre-emp and low-latency patch, and works
(not so fine), i have also compiled the 1.0.5 alsa. now with the old kernel
audio don't work. I can't use the modules (insmod failed, but modinfo see them).
How
I just bought a HP zv5120us laptop the other day and I cannot
for the life of me get the sound work properly. I have downloaded and
installed the lastest alsa release, and that helped a little. I now have mixer
support, which I didn't before, and can hear the test sounds with
alsaconf. But when I
Dominique Dumont wrote:
James Courtier-Dutton [EMAIL PROTECTED] writes:
For basic Stereo PCM over SPDIF, you should get sound out.
Yes. It works. Weird thing is that I cannot mute it with muting IEC958
control...
The only switch that might do anything is: IEC958 Output Switch.
So, can you
James Courtier-Dutton [EMAIL PROTECTED] writes:
Download this test file:
ftp://ftp1.mplayerhq.hu/MPlayer/samples/A-codecs/AC3-samples/a52dec-streams/ac3test/stream
[snip]
I'll try that tomorrrow.
If PCM stereo mode does not work, then your sound card does not
support SPDIF output in a
On Tue, Jun 01, 2004 at 16:36:38 +0100, James Courtier-Dutton wrote:
1) PCM over SPDIF ?
Works very well...
2) AC3 over SPDIF
Nope..
If someone would like to donate a CS46xx based sound card, that would
also help a lot, as I can record a pure SPDIF signal using the ICH5, and
therefore can
On Tue, Jun 01, 2004 at 19:28:10 +0200, Dominique Dumont wrote:
If someone would like to donate a CS46xx based sound card, that
would also help a lot, as I can record a pure SPDIF signal using the
ICH5, and therefore can tell what is going wrong very quickly.
If needed I can set up the
Dominique Dumont wrote:
I still don't understand why currently DTS *is* working and AC3 is
*not* working...
Cheers
The answer to that is simple. DTS does things differently from AC3.
DTS does not do CRC checks, AC3 does.
DTS does not need any special spdif bits set, AC3 does. AC3 needs the
On Tue, Jun 01, 2004 at 22:48:29 +0200, Dominique Dumont wrote:
I still don't understand why currently DTS *is* working and AC3 is
*not* working...
I read that dts is not so picky about status bits...
Cheers
---
This SF.Net email is
On Tue, Jun 01, 2004 at 21:18:58 +0100, James Courtier-Dutton wrote:
Download this test file:
ftp://ftp1.mplayerhq.hu/MPlayer/samples/A-codecs/AC3-samples/a52dec-streams/ac3test/stream
done...
Then play it in xine. http://xinehq.de.
Before starting xine, edit the .xine/config and check
Thanks for all the output, but it does not help me much.
I guess I cannot help you much further.
I used xine as an example, because I wrote some of the AC3 code in it,
so I know exactly what it is doing when in passthru mode etc.
I don't know what mplayer is doing with the AC3 stream.
The
On Tue, Jun 01, 2004 at 19:35:48 +0200, Dominique Dumont wrote:
James Courtier-Dutton [EMAIL PROTECTED] writes:
In addition, could you possibly look at your sound card, and note down
the exact model numbers on each chip.
I will see if I can get hold of the datasheets.
Well, I use the
Philipp Morger wrote:
On Tue, Jun 01, 2004 at 19:35:48 +0200, Dominique Dumont wrote:
James Courtier-Dutton [EMAIL PROTECTED] writes:
In addition, could you possibly look at your sound card, and note down
the exact model numbers on each chip.
I will see if I can get hold of the datasheets.
Well,
18 matches
Mail list logo