mcquaid mcquaid wrote:
I have a rate problem in most sound applications if the rate of the file
isn't 48000hz. It's not really noticeable with 44100 but extremely
noticeable with low rates (8khz). Sounds will exhibit skipping and slight
speed ups. For example I have a record file of someone
Hi!
I've discovered a bad bug with my alsa and my delta 1010lt. The input volume
was much to low for a long time, but I thought it was the cable, because a pin
was a bit disfigured. Now I found out it was alsa.
Alsamixer doesn't display the ipga-analog volume controls and it crashes
with a
[EMAIL PROTECTED] wrote:
I have M-audio fast track pro usb sound card with two output devices,
hw:2,0 for analog output and hw:2,1 for digital. Currently /dev/dsp2 is
assigned to hw:2,0 but i cannot figure out how to assign /dev/dspx to
hw:2,1.
The number X in /dev/dspX is always the
Hi!
I have just bought a Terratec PHASE 22, as there seemed to be good
support for it in Alsa. However, I have been unable to get anything
but the left channel during playback and amixer lists the output
channels as mono:
Simple mixer control 'DAC',0
Capabilities: volume volume-joined
On Mon, 2006-02-13 at 19:22 +0100, Nikolai Weibull wrote:
Hi!
I have just bought a Terratec PHASE 22, as there seemed to be good
support for it in Alsa. However, I have been unable to get anything
but the left channel during playback and amixer lists the output
channels as mono:
Simple
On Mon, 2006-02-13 at 17:51 -0700, Kasimir Gabert wrote:
make -C /lib/modules/2.6.8-2-386/source SUBDIRS=/home/
kasimir/Desktop/ alsa-driver-1.0.10 O=/lib/modules/2.6.8-2-386/build
modules
make: *** /lib/modules/2.6.8-2-386/source: No such file or
directory. Stop.
make: *** [compile] Error
On 2/13/06, Kasimir Gabert [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 17:51 -0700, Kasimir Gabert wrote: make -C /lib/modules/2.6.8-2-386/source SUBDIRS=/home/ kasimir/Desktop/ alsa-driver-1.0.10 O=/lib/modules/2.6.8-2-386/build
modules
make: *** /lib/modules/2.6.8-2-386/source: No such
I posted this to the rosegarden/CCRMA list recently, and was given the
suggestion to try this list.
Hopefully someone here has a solution
Well, it's been 4 days or so, since I posted my last message about midi
problems (2 weeks since my first). I've also posted on CCRMA forum
and
I posted this to the rosegarden/CCRMA list recently, and was given the
suggestion to try this list.
Hopefully someone here has a solution
Well, it's been 4 days or so, since I posted my last message about midi
problems (2 weeks since my first). I've also posted on CCRMA forum
and
Lee Revell [EMAIL PROTECTED] writes:
On Sun, 2006-02-12 at 21:58 -0600, Jim Hunter wrote:
I've been trying to get my Roland UA-100 to work with ALSA (on Ubuntu
5.10), but have had no luck. The snd-usb-audio module loads and the
device is recognized as far as I can tell - it shows up as
hi David, try modprobe snd-ice1712 as su, maybe your alsadriver for your delta need this to workdont worry youll make itozomatzinDavid Slimp [EMAIL PROTECTED] wrote: I posted this to the rosegarden/CCRMA list recently, and was given thesuggestion to try this list.Hopefully someone here has a
Thanks Ricardo
I know I'll eventually make it! heh
But not without some help :)
The modprobe did not help.
Here is a link to the thread on the CCRMA list:
http://ccrma-mail.stanford.edu/pipermail/planetccrma/2006-February/011200.html
You can see a LOT of my systems output/settings there.
On Mon, 2006-02-13 at 22:33 -0600, David Slimp wrote:
Thanks Ricardo
I know I'll eventually make it! heh
But not without some help :)
The modprobe did not help.
Here is a link to the thread on the CCRMA list:
On Mon, 2006-02-13 at 23:13 -0600, David Slimp wrote:
I guess I'm too new to know.
How do I check if it's using hw as opposed to default?
How do I fix it, if that IS what's going on?
No idea, what settings do those apps have for sequencer port?
Lee
On Mon, 2006-02-13 at 23:36 -0600, David Slimp wrote:
Well, I can't even get muse started to check or change anything :)
$ muse
mjsucaps: capsetp: Operation not permitted
/usr/bin/konqueror
ALSA lib seq.c:928:(snd_seq_open_noupdate) Unknown SEQ hw
Could not open ALSA sequencer: No such file
On Mon, 2006-02-13 at 23:52 -0600, David Slimp wrote:
I'm running FC3 with CCRMA.
# file /dev/snd/seq
/dev/snd/seq: character special (116/1)
# lsmod | grep seq
snd_seq_dummy 4228 0
snd_seq_midi 10400 0
snd_seq_midi_event 8704 1 snd_seq_midi
snd_seq
Who should I ask about this?
Certainly SOME guru out there must know the deep inner workings of this?
David
On 2/14/06, Lee Revell [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 23:52 -0600, David Slimp wrote:
I'm running FC3 with CCRMA.
# file /dev/snd/seq
/dev/snd/seq: character
On 2/13/06, Lee Revell [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 19:59 +0100, Nikolai Weibull wrote:
On 2/13/06, Lee Revell [EMAIL PROTECTED] wrote:
On Mon, 2006-02-13 at 19:22 +0100, Nikolai Weibull wrote:
I think this card simply exposes all the outputs as mono channels rather
18 matches
Mail list logo