Am Samstag, 2. September 2006 20:21 schrieb Bill Unruh:
> On Sat, 2 Sep 2006, Lee Revell wrote:
> > On Sat, 2006-09-02 at 11:58 -0400, Geddes Munson wrote:
> >> Greetings,
> >>
> >> I am trying to get our college radio station to do online
> >> streaming, and I am pretty close. Running debian with
Hi all,The details first:Software: OS - Fedora Core 5, 2.6.17-1.2174_FC5Driver - Alsa Driver 1.0.12Hardware:Motherboard: ASUS A8N-VMSoundMAX ADI ADI1986A 5.1 Channellspci | grep -i sound: 00:
10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)Problem,The sound card is configu
I have a Gateway NX860XL, and can not get sound to work under linux
with ALSA 1.0.12 on kernel 2.6.17.11. The snd-hda-intel module is
loaded with the model=ref option. Removing the model option does not
help. There is no sound via speakers or headphones, and I've checked
the mixer settings. Audio a
Hi,
i'm running Fedora Core 5 on an Asus A6T-AP005H laptop and the sound seems to
be running. However there are several small problems. Maybe someone could help
me to fix them.
The major problem i have with the running configuration below is the volume
control. When i set the volume to 0 the r
I have a bttv card, and I put a cable between this card and the audigy. Work
very well. It it the same kind of audio cable as the one between a cd drive and
a sound card. I connected it on the aux input of the audigy.
Without cable, it is possible to do that, but you must load a module. For the
bt
Hello
While watching hi-definitions video, I've noticed a lots of audio
drop-outs when watching movies with raw ac3 on spdif output (ac3
decoding is done by my Yamaha amplifier).
Long story short, I've been able to reproduce the problem when playing
a raw ac3 stream with ac3dec while loading my
Hi all,
Does anyone have any information on how to make the hda-intel driver
work properly when the codec is recognised as generic? My sound works
but I have no mic and no headphones output.
The mixer shows only the master volume and PCM, the input tab has only
capture. The sound comes out well b
Hi !
I get no sound from my new notebook Toshiba Satelitte P100-313.
lspci shows:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
I use alsa-driver 1.0.13rc1 and module snd-hda-intel with the options
snd-hda-intel model=ref.
alsamixer s
Hi all,
i got an audigy (emu10k1) and a connexant module for a tv card's sound
(cx88_alsa).
Is it possible to connect the Capture of cx88_alsa to the Line's (or other)
emu10k1 input.
I was thinking that it may be possible with a .asoundrc tweak ? what do you
will use to do that?
today i m