Hi,
>Is it possible to swap front/rear channels when using
>emu10k card (sb Live!)?? Rear channel uses better
>DAC's, so I'm doing for this for sound quality.
There isn'such options, but you can use front end rear channels
independent. Never SB Lives uses AC97 for all channels (there is not
othe
Hi,
First version of SB Live was only 4.0 card.
If it is 5.1 card on back side of card should be 3 stereo outputs
and 2 stereo inputs
outputs:
front - green
rear - black
center/lfe - orange - this is shared with digital output
inputs:
pink - mic
blue - line in
In any alsa application you can sp
Hi,
I think this is Audigy 2 ZS (not Audigy 2 LS)
Unmute end set volume to this
Master
Front - this is on far right side of alsamixer
PCM
and try to play something with aplay
for midi unmute and set previous and
Music
and try play some music
for line in you need to unmute set previous and
Lin
From
00:11.0 Class 0401: 1102:0006
or
00:11.0 Multimedia audio controller: Creative Labs [SB Live! Value]
EMU10k1X
Looks like you have Dell variant of SB Live (based on emu10k1x).
This is not supported by alsa or any other opensource driver. Only
driver that support this chip is comercial os
Hi,
Could you try send output of
lspci -n
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented b
Hi,
If you want capture Line in.
in alsamixer
unmute and set volume for "Line In" and mute other source (CD,
Aux, ..)
set volume for "Analog Mix Capture" (for example to 100)
for mic
set volume for "Mic Capture" (for example to 100)
and if you need "Mic boost" too
Peter Zubaj
=
Hi,
These slides apears as soon as program open stream, and go away as
soon as playback stop.
Instead of adjusting this, tray to lower Wave (Wave surround, Wave
Center) volumes and Master volume set only to 75 (from 100) or mute
tone controls.
Peter Zubaj
__
Hi,
2) Optical Raw switch - it is used for AC3 passthrough. Should by
off for normal use (spdif out will play sound from pcm or alsa OSS
emulation) or on (spdif out will play sound from spdif device - AC3
stream - unaltered).
Why optical ??? Maybe because Optical and coaxial spdif output is 1
Hi,
emu10k1-gp - is gameport driver - it will not conflict with audio
driver.
In which PCI port do you have your SB Live ???
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
Th
Hi,
spdif do some setup of card (see "IEC958 Optical Raw
Playback Switch" and "SB Live Analog/Digital Output Jack")
hw:0,2 not - unmute
"IEC958 Optical Raw Playback Switch" and "SB Live Analog/Digital
Output Jack"
If you want to use digital speakers (or spdif out) try to unmute "SB
Live Analo
Hi,
>First, for those of you who don't know, the SoundBlaster Audigy 2
>NX is
>a usb (2.0) sound device based on the Audigy 2. Most of the
>features
>d
Audigy 2 NX is not based on audigy 2. Do not belive creative
everything. It shares only name.
>C) To be able to use the sound shapers (CMSS
There was such atempt. You should search alsa-devel (or ask there),
or try this link
http://www.mail-archive.com/alsa-
[EMAIL PROTECTED]/msg11478.html
but there is not documentation from creative or dell.
Peter Zubaj
== REKLAMA
Spolocnost SUN Micros
Not good news,
>From line
02:02.0 Class 0401: 1102:0006
Looks like you have dell version of SB Live which is based on
emu10k1x and not emu10k1. If you can look on main chip on soundcard
there is EMU10K1X.
emu10k1x is not suported by ALSA. New versions of alsa emu10k1
driver will fail to load t
Hi,
Could you try send output of
lspci -n
Peter Zubaj
== REKLAMA
Spolocnost SUN Microsystems uviedla na trh novy server Sun Fire V20z
zalozeny procesoroch AMD Opteron.
Viac informacii najdete na : http://www.somi.sk/sun/v20z.php
===
Hi,
AFAIK emu10k1x is not supported.
(Could someone remove pci id of emu10k1x from emu10k1 driver, or add
message, that this chip is not supported by emu10k1 driver ?)
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
There are to mic controls
One is mic +20 db gain (this is only on/off switch)
and mic volume (on/off + volume 0 - 100).
Look at top of alsamixer for detail label.
Also there was bug for ALC650 rev E and higher (rev >= 2) and with
mic not powered.
Peter Zubaj
== REKLAMA ==
Hi,
Did you try all outputs on card ???
Try to unmute and set volume to 100 on
Master
PCM
Front
Peter
== REKLAMA
Java Desktop System predstavuje prvu pouzitelnu alternativu voci Windows za
poslednych 15 rokov, pretoze prinasa zákaznikom bezpecne a dov
Hi,
Try to switch "SB Live Analog/Digital Output Jack" on and off.
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Li
Hi,
plug:spdif do some setup of card (look at "IEC958 Optical Raw
Playback Switch" and "SB Live Analog/Digital Output Jack")
plug:hw:3.0 not - unmute
"IEC958 Optical Raw Playback Switch" and "SB Live Analog/Digital
Output Jack"
Peter Zubaj
http://www.pob
Hi,
I think, that they are not supported now. If you have some programing
skils, try to discover where side speakers are connected - on which
FX8010 output (maybe 0x0c, 0x0d (alias 0x6c, 0x6d)).
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svoj
Hi,
You are right. Emu10k1 driver supports only 16/48000 playback and
recording. There is not info how is 24/96000 playback, recording
working on Audigy 2 (ZS).
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
in ALSA >= 1.0.0 Front, Surround, Center, LFE volume controls only
upmixing (mirroring).
if you set surround, center to 0) you dissable mirroring to surround
and center. LFE is (L + R) / 2. If you need downpass filter for LFE
from L, R channels, then you must change DSP program in driver.
If yo
Hi,
>I wonder whether it is possible with ALSA, in simple questions:
yes.
>Is there such a thing? Where to get it from
ld10k1 - not yet finished, but something works (many bugs)
http://ld10k1.sourceforge.net
Mostly tested on Audigy (somehow works on SB Live too), has problem
to run on gentoo -
> We shoud have for each slider an explanation.
But sliders are diffrent for diffrent card.
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
The SF.Net email is sponsored by Ecl
Hi,
"Audigy CD" control controls volume for digital CD connection.
Are you sure that DVD outputs digital stream ???
Peter Zubaj
http://www.pobox.sk/ - najvacsi slovensky freemail
---
The SF.Net email
Or for RedHat or Fedora use
chkconfig --add alsasound
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Dev
Hi,
This is how it should work.
Not every control must have mute.
You don't need to set capture source - just set capture volume for
sources which you want record and set capture volume to 0 for sources
you don't want record.
Peter Zubaj
http://www.logofu
Hi,
This is how it should work.
Not every control must have mute.
You don't need to set capture source - just set capture volume for
sources which you want record and set capture volume to 0 for sources
you don't want record.
Peter Zubaj
http://www.logofu
Hi,
Looks like creative uses AC97 codec with center volume control. Try
this:
Do not uncomment
if ((err = snd_emu10k1_mixer(emu)) < 0) {
snd_card_free(card);
return err;
}
instead try find in file alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
in function _s
Hi,
Do you think this one ???
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
C:\\ac97_51.diff
Description: Binary data
Hi,
Do you think this one ???
Peter Zubaj
http://www.pobox.sk/ - najvacsi slovensky freemail
C:\\ac97_51.diff
Description: Binary data
Hi,
Hardware architecture permits that, needs some work.
Peter Zubaj
http://www.pobox.sk/ - najvacsi slovensky freemail
---
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in
>The strange thing is, i have to turn up 2 controls in alsamixer to
>activate it: Aux and Analog Mix. This can be quite frustrating when
>chasing the right control (if one of them is all the way down, you
>may
>never find the other one).
All analog sources are mixed together (Line Id + Analog CD
Hi,
Try ALSA 1.0.0rc2 (this is prefered way), or set capture to capture
and line in, mute line in and set AC97 volume to some level.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
Hi,
Try use ALSA 1.0.0rc2. There was changes in mixer for Audigy 2
addresing these isues:
>Center/Sub/Surround still have sound even if PCM is set to 0%. It
>is expected
>that NO sound is heard from any speakers with PCM output.
In 1.0.0rc2 for stereo wav playback pcm should control all chan
Hi,
This means same as unmuting Analog/Digital switch in alsa mixer (puts
center/lfe to digital mode)
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This SF.net email is sp
Hi,
Soundblaster Live Value card (device id - 1102:0006) is not supported.
It looks like it is not based on emu10k1.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This SF.ne
Hi,
Raise "Analog Mix" volume in alsa mixer. Unmute Line In and CD
volumes too.
You must unmute Tone switch to get tone controls to work.
Peter Zubaj
http://www.pobox.sk/ - najvacsi slovensky freemail
-
Hi,
http://www.cs.umass.edu/~cochran/
Looks like this OSS driver supports remote on SB Extigy.
Peter Zubaj
== REKLAMA =
Neobmedzený rýchly prístup na internet už od 666,- Sk mesačne!
Nextra ADSLink. http://adsl.nextra.sk
-
Hi,
Upgrade Alsa-lib too or overwrite Audigy.conf (it is somewere
in /usr/share/alsa) with file Audigy.conf from alsa-
lib/src/conf/cards (from CVS or from alsa-lib-0.9.8)
Peter Zubaj
== REKLAMA =
Neobmedzený rýchly prístup na internet už od
Hi,
In CMedia drivers PCM volume control is implemented in software (in
kernel space)
Peter Zubaj
== REKLAMA =
Neobmedzený rýchly prístup na internet už od 666,- Sk mesačne!
Nextra ADSLink. http://adsl.nextra.sk
--
Hi,
Something is wrong with compilation, but I think that this card will
not work with ALSA or OSS drivers from opensource.creative.com,
because I think this is SB Live OEM Value sold by Dell (from -
unknown device 0006). This is not emu10k1 based, it is based on
emu10kx (and this is not suppo
>My point is: I would like one person to show me a link to some
>easily
>locatable documantation that will show me right now how to enable
>5.1 audio
>on a SB Live 5.1 - rather than just get an annoying buzzing sound
>from the
>center. Can you even find one? My point exactly.
>From WIKI
htt
Hi,
If you have ALC650 rev.1 alias ALC650 rev D, try to use alsa-driver
0.9.7c.
Peter Zubaj
== REKLAMA =
Vyrazne zlavy pocitacov a prislusenstva
SunFire V60x servery v cenach uz od 96.000,- Sk bez DPH
Navstivte nas na adrese http://www.somi.s
Hi,
Are you using ALSA 0.9.7 or higher, if not then upgrade at least at
0.9.7
Peter Zubaj
== REKLAMA =
Vyrazne zlavy pocitacov a prislusenstva
Sun Fire V210 server v cenach uz od 125.000,- Sk bez DPH
Navstivte nas na adrese http://www.somi.s
Hi,
Run snddevices script from alsa-driver package.
Perer Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net h
Hi,
Did you unmute it too (with M key - there shouldn't be M above volume
slider).
Peter Zubaj
http://www.pobox.sk/ - spolahliva a bezpecna prevadzka
---
This SF.net email is sponsored by: SF.net Giv
OSS uses diffrent way to control pcm volume as is used ALSA.
OSS sets AC97 PCM volume to 0 dB or +12 dB (boost) and volume is
controled by DSP code.
ALSA uses AC97 PCM volume. You have range from -34,5 dB to +12 dB.
If you want PCM volume from range -34,5 dB to 0 dB (this is without
bost) then
Hi,
AFAIK ALSA hasn't +12dB bost on front. Use PCM volume control to
adjust volume on front speakers.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This sf.net email is sp
Hi,
It looks like your sound card(driver) doesn't support hardware
mixing. Use dmix plugin or sound server (esound, arts, ...).
>From ALSA source looks that only these chips/cards/drivers supports
multiple opens:
driver - multiple opens count
--
YMFPCI - 32
VIA823
Hi,
When KDE is compiled for OSS driver only, it doesn't show any ALSA
midi device. I don't know if this is feature or bug (KDE), but this
is not problem of ALSA but problem of KDE. (There is test in KDE -
compiled for OSS and runing on ALSA - not use midi from ALSA - not
use alsa oss emulatio
Hi,
You need encoder for Dolby Digital.
Peter Zubaj
== REKLAMA =
Vyrazne zlavy pocitacov a prislusenstva
Sun Fire V210 server v cenach uz od 125.000,- Sk bez DPH
Navstivte nas na adrese http://www.somi.sk/sun/lowend_servery.php
===
Hi,
For hardware synth on SB Live you must load soundfond to it.
Use command:
sfxload soundfile.sf2
where soundfile.sf2 is name for soundfond (for example ct2mgm.sf2 -
this is in windows drivers).
In RedHat 9 it is in package awesfx-0.4.3a-14.i386.rpm on cd 2.
Peter Zubaj
=
This needs changes in source of fx8010 dsp init code
alsa-driver/alsa-kernel/pci/emu10k1/emufx.c
in function _snd_emu10k1_init_efx. :-(
Peter Zubaj
http://www.pobox.sk/ - urcujeme trendy
---
This SF.net
Try to use ALSA 0.9rc7 or CVS.
Versions before ALSA 0.9rc7 doesn't suports Audigy2.
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
---
This SF.net email is sponsored by: SlickEdi
55 matches
Mail list logo