Dear all,
I am writing to ask how to route certain DSP 'outputs' from my Audigy 2 ZS
back into the equivalent 'ASIO inputs' for recording purposes.
Specifically, I'd like to route outputs from the Wavetable Synths on my
card to inputs that would go straight into a DAW (such as Ardour), so that
I
@lists.sourceforge.net
Gesendet: Montag, den 5. April 2010, 22:01:28 Uhr
Betreff: Re: [Alsa-user] emu10k1 (Audigy, Rev. 03): No Sound using AC3
Passthrough and Wrong Channel-Routing
Hello,
I have a similar problem with soundblaster 5.1 live.
Choosing "stereo" as output mode in, eg. mplayer or vlc,
Christian Nolte schrieb:
> Arthur Marsh schrieb:
>> Christian Nolte wrote, on 2010-01-05 07:24:
>>> -BEGIN PGP SIGNED MESSAGE-
>>> Hash: SHA1
>>>
>>> Hi,
>>>
>>> I have a Soundblaster Audigy (rev 03) card which I have connected via a
>>> coaxial S/PDIF to my AV Receiver. The stereo S/PDIF
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Christian Nolte schrieb:
> Arthur Marsh schrieb:
>> Christian Nolte wrote, on 2010-01-05 07:24:
>>> -BEGIN PGP SIGNED MESSAGE-
>>> Hash: SHA1
>>>
>>> Hi,
>>>
>>> I have a Soundblaster Audigy (rev 03) card which I have connected via a
>>> coaxia
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Arthur Marsh schrieb:
> Christian Nolte wrote, on 2010-01-05 07:24:
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA1
>>
>> Hi,
>>
>> I have a Soundblaster Audigy (rev 03) card which I have connected via a
>> coaxial S/PDIF to my AV Receiver. The ste
Christian Nolte wrote, on 2010-01-05 07:24:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hi,
>
> I have a Soundblaster Audigy (rev 03) card which I have connected via a
> coaxial S/PDIF to my AV Receiver. The stereo S/PDIF connection is
> working perfectly and I can hear sound and the re
Christian Nolte wrote, on 2010-01-05 07:24:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Hi,
>
> I have a Soundblaster Audigy (rev 03) card which I have connected via a
> coaxial S/PDIF to my AV Receiver. The stereo S/PDIF connection is
> working perfectly and I can hear sound and the re
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a Soundblaster Audigy (rev 03) card which I have connected via a
coaxial S/PDIF to my AV Receiver. The stereo S/PDIF connection is
working perfectly and I can hear sound and the receiver detects the
digital Stereo PCM Stream correctly.
How
Thanks for all your help. I've found the reason in a german forum. I
had CONFIG_GROUP_SCHED support into my kernel config. After
deactivating
this, it now works fine for me.
Happy Greetings,
Matthias
2009/4/20 Sergei Steshenko :
> On Mon, 20 Apr 2009 09:06:55 +0200
> Matthias Mann wrote:
>
>
>>
On Monday 20 April 2009 17:06:55 Matthias Mann wrote:
> And now, what should i do? I have the group audio and the normal user
> is a member of group audio since a long time. But jackd doesn't run in
> realtime for this user. What's going wrong here?
Have you added something like this to /etc/secur
On Mon, 20 Apr 2009 09:06:55 +0200
Matthias Mann wrote:
> > I vaguely remember that you have to add your user ID to "audio" group
> > or something like this.
> >
> > The point is that increasing priority normally requires root
> > privileges, and in order to enable doing this by non-root that gr
2009/4/19 Sergei Steshenko :
> On Sun, 19 Apr 2009 19:01:48 +0200
> Matthias Mann wrote:
>
>> Hi,
>>
>> i had installed the realtime kernel 2.6.26.8-rt16 on a debian
>> linux 5.0 (Lenny). Cause jackd don't like realtime mode i've
>> searched on google and i found this page:
>>
>> http://www.alsa-p
On Sun, 19 Apr 2009 19:01:48 +0200
Matthias Mann wrote:
> Hi,
>
> i had installed the realtime kernel 2.6.26.8-rt16 on a debian
> linux 5.0 (Lenny). Cause jackd don't like realtime mode i've
> searched on google and i found this page:
>
> http://www.alsa-project.org/main/index.php/Low_latency_h
Hi,
i had installed the realtime kernel 2.6.26.8-rt16 on a debian
linux 5.0 (Lenny). Cause jackd don't like realtime mode i've
searched on google and i found this page:
http://www.alsa-project.org/main/index.php/Low_latency_howto
Okay, that's great. I did all what is described in this howto,
exc
Well,
I have a Creative Soundblaster 5.1 (emu10k1) but my "normal" (this is front
imho) Output is unusable damaged. So instead of buying a new card, I wanted to
use the 2nd or 3rd Output (like I unterstand, this is REAR and the other is
calles spif) for this.
I got the hind, that it has someth
Hi
I use spdif input capture with audigy2zs.
If I do:
arecord -D hw:0,0 -f dat -c 2 -t raw -r 48000 | aplay -f
dat -D front
and select capture level in alsamixer it works fine.
But if I use another way with p16v, select hd capture
source to spdif and hd capture channel to 1:
arecord -D hw:0,
Hi,
I have an SBLive! sound card, and I use the emu10k1
module from alsa-driver-1.0.14_rc2_p3234.
I've noticed that when I record with my mic, I get
playback from my speakers, and that I can't control
this feedback.
In playback section, I have:
Mic Select [Mic1]
Line [dB gain=-34.50, -34.50] [Mu
Hello all,
I've a problem with a SoundBlaster Live that I couldn't resolve reading
the archives.
When trying to record (with Audacity) the output of my soundcard (i.e.
from Xmms, or Beatrix organ) I can't adjust the record level to have a
clean sound : either (a lot) too weak or very distorded an
On 1/24/06, Brian Dunn <[EMAIL PROTECTED]> wrote:
I'm running alsa 1.0.10 on my SB Live! Value and i need some help withcapture settings.my shoe-string budget studio features a soundcard with a blown linein. I need stereo input so i can capture two live channels at the
same time in ardour. I've w
-- Forwarded message --From: Lee Revell <[EMAIL PROTECTED]>Date: Jan 24, 2006 1:19 AM
Subject: Re: [Alsa-user] emu10k1 woes... only mono capture from auxTo: Brian Dunn <[EMAIL PROTECTED]>Cc:
alsa-user@lists.sourceforge.netOn Mon, 2006-01-23 at 23:52 -0600, Brian Dunn
On Mon, 2006-01-23 at 23:52 -0600, Brian Dunn wrote:
> I'm running alsa 1.0.10 on my SB Live! Value and i need some help with
> capture settings.
> my shoe-string budget studio features a soundcard with a blown line
> in. I need stereo input so i can capture two live channels at the
> same time in
I'm running alsa 1.0.10 on my SB Live! Value and i need some help with
capture settings.
my shoe-string budget studio features a soundcard with a blown line
in. I need stereo input so i can capture two live channels at the
same time in ardour. I've wired up a head phone jack to the aux in
port on
Peter Zubaj <[EMAIL PROTECTED]> writes:
> Hi,
>
>>Is it possible to recieve Dolby Digital on the S/PDIF In coax jack
> on my
>>SB Live! livedrive, decode it, and send it as 4-channel stereo to
> speakers?
>
> AFAIK this is not supported in current ALSA for any emu10k1, emu10k2
> card (SB Live, A
Hi,
>Is it possible to recieve Dolby Digital on the S/PDIF In coax jack
on my
>SB Live! livedrive, decode it, and send it as 4-channel stereo to
speakers?
AFAIK this is not supported in current ALSA for any emu10k1, emu10k2
card (SB Live, Audigy1, Audigy2, Audigy2ZS).
>Would getting a fancier
Is it possible to recieve Dolby Digital on the S/PDIF In coax jack on my
SB Live! livedrive, decode it, and send it as 4-channel stereo to
speakers? I have a SB Live! Platinum, 4 channel (not 5.1). The source is
a consumer dvd-video player, the kind in a home theatre system, not
internal. The outpu
Is there a document which describes how to configure the emu10k1 driver
for the Audigy2 platinum
I particularly want to use the MIDI IN port for an external midi
keyboard. I've tried two keyboards both of which are functioning but
neither of which work via the Audigy MIDI IN port.
Both the MID
Ühel kenal päeval (esmaspäev, 19. aprill 2004 20:02) kirjutas Chris Gibbs:
: Hi ya,
: Figured how to get card to record:-)
: Don't run KDE :-(
Actually, it's the KDE sound server aRtsd. Disable aRts in KDE settings and
you should be fine.
--
Elver Loho
++[>+++<-]>[<++>-]<[>+<-]>>>+++[<+++>-
On Mon, 19 Apr 2004 18:02:43 +0100
Chris Gibbs <[EMAIL PROTECTED]> wrote:
> Hi ya,
>
> Figured how to get card to record:-)
>
> Don't run KDE :-(
>
> If KDE is not running I get to capture sound --- dance of joy free
> herring for Tux
Or just disable arts -- arts is EVIL; no correct that: any
Hi ya,
Figured how to get card to record:-)
Don't run KDE :-(
If KDE is not running I get to capture sound --- dance of joy free
herring for Tux
Chris
---
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presen
Hi,
Just crossed my fingers and tried audacity, no luck, but I think it
means my configuration needs much help because I can only select from
/dev/dsp and /dev/dsp1.
In theory there should be a /dev/dsp2 also because I've a bt878 as well
as via
Tho /dev/dsp is linked to /dev/dsp0 audacity ca
THANK YOU I loaded up audacity and tried to record following your
instructions, and now I've successfully recorded from my AudioTechnica
AT3525 and my optical in port. Simply raised the appropriate capture
level. I've been trying to get this down for a couple of months with
no success an
Hi ya
Unfortunately It don't help. cat /dev/dsp0 > tst.wav always is 0 bytes.
Is there some other way to record?
Chris
You should (hopefully) be able to record by increasing the level of the
"Analog Mix Capture" channel and the channel(s) you wish to capture. You may
also need to up the "Analo
Hiya,
On Friday 16 Apr 2004 22:59, Jason Jones wrote:
> I'm having the exact same problem, but with an Audigy Platinum EX (not
> Audigy 2). I can't figure out what's wrong. ...
> Chris Gibbs wrote:
>> I can't figure how to record from Audigy 2.
>> In alsamixer none of the controls seem recordable
I'm having the exact same problem, but with an Audigy Platinum EX (not
Audigy 2). I can't figure out what's wrong.
If you figure it out, please be sure to let me know. Thanks. (I'll
keep hammering on it. If I find anything, I'll let ya know)
--Jason
Chris Gibbs wrote:
Hi ya,
I've had a p
Hi ya,
I've had a problem since I change to alsa (currently I use 1.0.3 ) I
can't figure how to record from Audigy 2.
In alsamixer none of the controls seem recordable (pressing space does
nothing, the I'd expect to see on a recordable control is not on
any control).
I also have snd-via
Hi,
If you want capture Line in.
in alsamixer
unmute and set volume for "Line In" and mute other source (CD,
Aux, ..)
set volume for "Analog Mix Capture" (for example to 100)
for mic
set volume for "Mic Capture" (for example to 100)
and if you need "Mic boost" too
Peter Zubaj
=
I have been trying for days to figure this out and I believe it has stumped me -- I
cannot determine howto "capture" any input from any source, loading up alsamixer
doesn't let me capture any line (the top line where it would say CAPTUR isn't even
there) and kmix doesn't show any sliders on the
There was such atempt. You should search alsa-devel (or ask there),
or try this link
http://www.mail-archive.com/alsa-
[EMAIL PROTECTED]/msg11478.html
but there is not documentation from creative or dell.
Peter Zubaj
== REKLAMA
Spolocnost SUN Micros
Aha thnx alot for the information. Will support be included in future versions
of alsa ?
Citerar p z <[EMAIL PROTECTED]>:
> Not good news,
>
> From line
> 02:02.0 Class 0401: 1102:0006
>
> Looks like you have dell version of SB Live which is based on
> emu10k1x and not emu10k1. If you can
Not good news,
>From line
02:02.0 Class 0401: 1102:0006
Looks like you have dell version of SB Live which is based on
emu10k1x and not emu10k1. If you can look on main chip on soundcard
there is EMU10K1X.
emu10k1x is not suported by ALSA. New versions of alsa emu10k1
driver will fail to load t
ok here it comes
lspci -n
00:00.0 Class 0600: 8086:2560 (rev 01)
00:01.0 Class 0604: 8086:2561 (rev 01)
00:1d.0 Class 0c03: 8086:24c2 (rev 01)
00:1d.1 Class 0c03: 8086:24c4 (rev 01)
00:1d.2 Class 0c03: 8086:24c7 (rev 01)
00:1d.7 Class 0c03: 8086:24cd (rev 01)
00:1e.0 Class 0604: 8086:244e (rev 81)
Hi,
Could you try send output of
lspci -n
Peter Zubaj
== REKLAMA
Spolocnost SUN Microsystems uviedla na trh novy server Sun Fire V20z
zalozeny procesoroch AMD Opteron.
Viac informacii najdete na : http://www.somi.sk/sun/v20z.php
===
I have disabled apic and acpi and tried changing pci-slot, changing irq in bios
,reserving irqs and so on
Does anyone have any more ideas what I can try to do ?
I'm also using suse9 on a Dell Dimension 4550.
//Patrik
My output in /var/log/messages
Mar 18 11:43:18 d26-217 kernel: ALSA pcm
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hey folks,
I'm having a strange problem with the Alsa mixing controls and my Sound
Blaster Live (original) card. I searched the board for an answer but could
find none.
I use different programs on differnet occasions (KMix, Freevo, Xine, Mplayer)
Ingo Reimann wrote:
> Well, but how can i see, if a device is used and how?
See "aplay -l" for a list of devices.
To see which one is used, look into the files below below
/proc/asound/cardX/pcmXp.
HTH
Clemens
---
SF.Net is sponsored by: S
Hi Clemens, thanks for your help..
Well, but how can i see, if a device is used and how?
I try to send any ac3 to my amp, but nothing happens.
if a ac3dec -P test.ac3 or ac3dec -C test.ac3 anything, i hear nothing
ac3dec -R test.ac3 i get a downmix the the stream but via the digital
output..
so
Ingo Reimann wrote:
> When i strace accesses to spdif, i only see that /dev/snd/pcmC0D0p is
> used. I remember something about the device /dev/snd/pmcC0D3p in
> combination with pass-through. if i try to access this device directly,
> i get an "snd_pcm_open: No such device", even if it is there and
Hi,
i just grabbed the topic for my still persisting problem with the S/PDIF
output via the digital/analog output jack of my Audigy 2.
Meanwhile i use a debian 2.6.3 Kernel, but tried also different
cvs-versions of alsa-driver.
I may play 2 channel pcm via spdif but no A52 or DTS. The passthroug
On Sat, 21 Feb 2004 [EMAIL PROTECTED] wrote:
> Thnx for the quick reply, I tried disabling ACPI but without any improvement I
> still get the same error. Can there be anything else messing up my irq routing ?
> I'm running suse9 with 2.4.21-192 kernel.
Try disabling apic (apic is different from a
Thnx for the quick reply, I tried disabling ACPI but without any improvement I
still get the same error. Can there be anything else messing up my irq routing ?
I'm running suse9 with 2.4.21-192 kernel.
Citerar Jaroslav Kysela <[EMAIL PROTECTED]>:
> On Sat, 21 Feb 2004 [EMAIL PROTECTED] wrote:
>
On Sat, 21 Feb 2004 [EMAIL PROTECTED] wrote:
> Hello,
>
> I have some problems with a sblive! the card works fine under win2k but not with
> alsa. I don't get any sound what so ever and I have been googling/reading docs
> without finding anything to help me. I have also tried changing irq setting
Hello,
I have some problems with a sblive! the card works fine under win2k but not with
alsa. I don't get any sound what so ever and I have been googling/reading docs
without finding anything to help me. I have also tried changing irq settings.
The modules load without trouble and yes I have chec
On Fri, 2004-02-20 at 01:32, p z wrote:
> Hi,
>
> plug:spdif do some setup of card (look at "IEC958 Optical Raw
> Playback Switch" and "SB Live Analog/Digital Output Jack")
>
> plug:hw:3.0 not - unmute
> "IEC958 Optical Raw Playback Switch" and "SB Live Analog/Digital
> Output Jack"
>
> P
Hi,
plug:spdif do some setup of card (look at "IEC958 Optical Raw
Playback Switch" and "SB Live Analog/Digital Output Jack")
plug:hw:3.0 not - unmute
"IEC958 Optical Raw Playback Switch" and "SB Live Analog/Digital
Output Jack"
Peter Zubaj
http://www.pob
Title: RE: [Alsa-user] emu10k1 midi failing. why?
clemens,
many thanks for your reply. indeed, a 0 volume mixer control ("Music") was the culprate. your advice to check /proc/asound/card/wavetableD was *very* helpful in determining that the soundfount was actually being
On Thu, 2004-02-19 at 08:31, Tim Lipscomb wrote:
> Hello,
>
> I have been happily using my Audigy with 2.6.x kernels for a couple of months.
>
> I upgraded to 2.6.3 yesterday and the sound card is detected - but there is there is
> no sound for PCM.
>
> I know the driver has changed between ve
Hello,
I have been happily using my Audigy with 2.6.x kernels for a couple of months.
I upgraded to 2.6.3 yesterday and the sound card is detected - but there is there is
no sound for PCM.
I know the driver has changed between versions.
Has anyone else had problems like this?
Thanks,
Tim
Hawkeye Parker wrote:
> i'm trying to understand why and how my midi playback capabilities
> are failing under ALSA. i'm trying to use my soundBlaster Live!
> (EMU10K1) midi synth, but i hear nothing.
> is there any way to tell *what* isn't working?
lsmod tells us the modules are loaded.
"pmidi
Title: emu10k1 midi failing. why?
hi all
i'm trying to understand why and how my midi playback capabilities are failing under ALSA. i'm trying to use my soundBlaster Live! (EMU10K1) midi synth, but i hear nothing. the "Details" page for this card on the Alsa site states:
- MIDI on SB live
Hi,
>I wonder whether it is possible with ALSA, in simple questions:
yes.
>Is there such a thing? Where to get it from
ld10k1 - not yet finished, but something works (many bugs)
http://ld10k1.sourceforge.net
Mostly tested on Audigy (somehow works on SB Live too), has problem
to run on gentoo -
OSS SoundBlaster Live! drivers came with an utility called
emu-dspmgr which enabled loading custom-made DSP patches
(code written in Emu10k1's assemby language).
As I am moving from Alsa to Emu10k1, I'm looking for such
an utility in ALSA...
Most of you will probably say that it's not needed, sin
Robert F Merrill wrote:
I've tried getting midi to work with my audigy 2, and I've got a few
stumbling blocks that I've hit.
I have snd_seq_oss etc loaded, and /dev/sequencer and /dev/music are
there.
However, sfxload says no awe synthesizer sound, and playmidi says no
output device found
an
I've tried getting midi to work with my audigy 2, and I've got a few
stumbling blocks that I've hit.
I have snd_seq_oss etc loaded, and /dev/sequencer and /dev/music are there.
However, sfxload says no awe synthesizer sound, and playmidi says no
output device found
any clues?
--
Dne st 7. ledna 2004 16:31 p z napsal(a):
> Hi,
>
> Do you think this one ???
>
> Peter Zubaj
I think this one wasn't working :-(
Petr
---
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration
Hi,
Do you think this one ???
Peter Zubaj
http://www.logofun.pobox.sk - urobte radost svojmu telefonu
C:\\ac97_51.diff
Description: Binary data
Hi,
Do you think this one ???
Peter Zubaj
http://www.pobox.sk/ - najvacsi slovensky freemail
C:\\ac97_51.diff
Description: Binary data
On Wed, 7 Jan 2004 13:08:18 +0100
Petr Kopecký <[EMAIL PROTECTED]> wrote:
> Hi,
>
> somebody send me a working patch for emu10k1 to enable routing from
> line-in to front and rear but my HDD is dead and I lost all my data
> including this patch.
>
> Could you send it to me once more, please.
I
Hi,
somebody send me a working patch for emu10k1 to enable routing from line-in to
front and rear but my HDD is dead and I lost all my data including this
patch.
Could you send it to me once more, please.
Many thanks.
Best regards
Petr
--
Ing. Petr Kopecky
E-mail: [EMAIL PROTECTED]
---
Richard Kimber wrote:
> While trying to install Alsa on my Debian testing system, I get:-
>
> Starting ALSA (version 0.9.6): emu10k1-failed emu10k1-failed failed
> invoke-rc.d: initscript alsa, action "restart" failed.
> dpkg: error processing alsa-modules-2.4.22.1203 (--install):
> subprocess pos
If you read the man mplayer, it says if i have -channels 5 will do 5.1, and it is
right, you dont count with the subwoofer, just front L,R & rear L,R & center;
-channels 6 should be front L,R & rear L,R & front center & rear center that it's
6.1; subwoofer dont counts, even that, i have tested
While trying to install Alsa on my Debian testing system, I get:-
Starting ALSA (version 0.9.6): emu10k1-failed emu10k1-failed failed
invoke-rc.d: initscript alsa, action "restart" failed.
dpkg: error processing alsa-modules-2.4.22.1203 (--install):
subprocess post-installation script returned er
Hello, i am using now http://opensource.creative.com/ emu10k1a driver, but i have
problemas with mine creative inspire 5.1 5300 speakers kit(
http://uk.europe.creative.com/products/product.asp?prod=250&page=1) , they are
connected to the card, analogic, not digital! So the driver dont works with
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 26 November 2003 11:17, you wrote:
> Joachim Schiele wrote:
> > when i do the following connection:
> > | Waldorf Q | -outin-> PC -outin-> | Waldorf Q|
> >
> > with either muse and midi through (this is working for other setups see
Joachim Schiele wrote:
> when i do the following connection:
> | Waldorf Q | -outin-> PC -outin-> | Waldorf Q|
> with either muse and midi through (this is working for other setups see below)
> of the (dd if=/dev/snd/midiC0D0 bs=1 of=/dev/snd/midiC0D0) command.
> also note that "local off"
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
dear list members,
==
i got the following problem:
when i do the following connection:
| Waldorf Q | -outin-> PC -outin-> | Waldorf Q|
with either muse and midi through (this is working f
Hi,
Can anyone help me to understand, how routing is organized for emu10k1 cards?
I've read SB-Live-mixer.txt but couldn't get how to route the signal from all channels
to analog LFE. It's oviously possible, as if I play 2 channels music/video it's routed
to all 6 channels ok. But how to route m
Hi
I have a machine with a single Soundblaster Live, running the darkice
audio streamer.
At startup it runs the following commands:
amixer set 'Capture' 80%
amixer set 'Line' rec
before it starts darkice, but then I only get sound in the left channel.
Then if I go into alsamixer and move captu
Hi,
i have a SB Live 5.1 (model 0100), and i got bass/treble
controls working fine with pcm. I was wondering though,
if its possible to get bass/treble to work with line-in,
CD, etc etc... in win32 it works fine with line-in..
but i can't get it to work in linux, not with creative
drivers, nor w
Hi,
I'm experiencing a little problem with the S/PDIF output of my SBLive
(I use ALSA 0.9.0rc6).
Sometimes when I send my S/PDIF data to the device I can hear some
chunks twice but according to the status the buffer isn't empty:
snd_pcm_status_get_delay() always returns something around 1 fra
hello list,
how can i use the nice reverb effect and bass boost the card can with
windows?
thank you
greetings
---
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility
Learn to use your power at OSDN's High Perfor
Hi! I have sb live 5.1. I have alsa 0.90rc6. When I load
snd-emu10k1-synth, load soundfonts(from sblive cd), I can hear some
notes and the sound begins to click and pop, as if the samples are
played on wrong sampling rate.
And what does PCM routing means? How to make for example, mirror front
chan
Mark Swanson writes:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On November 30, 2002 12:23 pm, Mark Swanson wrote:
> > Hello,
> >
> > I'm using 0.9rc6 with an emu10k1. I'm playing the ut_2003 demo and I hear a
> > lot of loud pops an crackles out of the sound card. The same kind
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On November 30, 2002 12:23 pm, Mark Swanson wrote:
> Hello,
>
> I'm using 0.9rc6 with an emu10k1. I'm playing the ut_2003 demo and I hear a
> lot of loud pops an crackles out of the sound card. The same kind of pops
> you would hear when you repeatedly
Hello,
I'm using 0.9rc6 with an emu10k1. I'm playing the ut_2003 demo and I hear a
lot of loud pops an crackles out of the sound card. The same kind of pops you
would hear when you repeatedly unplug and plug in your speaker cables.
The card/driver works 100% stable with no pops in any other app
On Thu, 5 Sep 2002, [EMAIL PROTECTED] wrote:
> Hi!
>
> I'm trying to utilize the hardware mixing capability of
> my sblive. I can play audio through the pcm channels 0 to 31
> with 'aplay -D hw:0,0,# some.wav', where # is the subdevice.
> Now, what I would like to do is to control the volume set
Sorry for the mess. Looks like the volume controls are activated
automatically when something is playing in the channel.
So problem solved...
--
Jaakko
---
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new
Hello again, and sorry for the spam.
I wrote here about these controls (pcm send and routing).
I probably disabled them by mistake somewhere
along the line, because /etc/asound.state has 'read write inactive'
in the comment.access field of each of the channels.
It's probably just me again, but I c
Hi!
I'm trying to utilize the hardware mixing capability of
my sblive. I can play audio through the pcm channels 0 to 31
with 'aplay -D hw:0,0,# some.wav', where # is the subdevice.
Now, what I would like to do is to control the volume settings
of these channels. I recall that in an earlier versi
Hi everybody! I'm very glad to say that my brand new Soundblaster Audigy works great
with Alsa (been able to watch DVDs with XINE with 5.1 surround).
There's only one thing that I can't manage: letting the LFE work with simple stereo
output (ie: XMMS playing MP3s).
I downloaded a so called 'Surr
Hi there!
I use an emu10k1 with spdif output enabled and alsa-driver-0.9.0rc2 on a
debian sid/woody.
Is there another possibility to chaage the output volume than moving the
"W
Currently I'm having problems with alsa-driver-0.9.0rc2 throwing kernel
oopses. Basically whenever I modprobe snd-emu10k1, the system rapidly
becomes unstable. It may last for a few more minutes, then it will spew out
a stream of errors about "Attempt to kill the idle task", "Aieee, killing
Has anyone been able to record with anything using
alsa-0.9rc1 with the sb audigy chipset?
I'm trying to capture off audio tape, playthrough
works fine, but it doesn't record anything.
Everything else works fine.
Thanks!
Andrew Clark
__
Do You Yah
I'm trying to get Alsa working well with my SB Live! 5.1+ card. I'm
using the 2.5.14 kernel. My alsa (-lib, -util) is from "cvs update -D '8
may 2002'", as I read somewhere RC1 was missing files and the current
CVS doesn't compile for me (something integer64-related that happened
later that da
I have a Debian linux box with a Sound Blaster Audigy Platinum
sound card and Klipsh (sp?) 5.1 surround speakers. I'm using
the 2.4.16, 2.4.18 and 2.5.11 kernels.
I've downloaded the alsa driver 0.90beta12 and followed the
directions carefully. In both the 2.4.16 and 2.4.18 (didn't
try with 2.5.
Workaround (very STRANGE) found...
To have it working absolutely with everything (all multimedia, games
etc..) I need to do following actions during startup (or after):
1. I have to load the oss drivers FIRST!!!
2. I have to unload them and load ALSA drivers.
3. I have to load the oss-compatibilit
I installed recent version of alsa drivers (yesterdays CVS) and found
following problem (before I used OSS drivers but these did not work with
quakeforge and quake2 - but worked with quake3)
When loaded the alsa dirvers for the first time EVERYTHING worked fine.
(I unloaded OSS drivers and loaded
Hi Mike!
* Mike Leone writes:
> choose you card with options for snd-emu10k1 in modules.conf.
> for my rev.07 sblive value card (alsa 0.9):
> alias snd-card-0 snd-emu10k1
> options snd-emu10k1 snd_extin=0x0003 snd_extout=0x1f0f
> Are these values standard, or are they unqiue to the card? And if
Are these values standard, or are they unqiue to the card? And if so, how do you find
out what values should be there?
- Original Message -
From: "Stephan Ivanov" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 15, 2002 7:46 AM
Subject: [
choose you card with options for snd-emu10k1 in modules.conf.
for my rev.07 sblive value card (alsa 0.9):
alias snd-card-0 snd-emu10k1
options snd-emu10k1 snd_extin=0x0003 snd_extout=0x1f0f
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sour
At Tue, 09 Apr 2002 10:20:47 +0400,
Frédéric Moinard wrote:
>
> Hello,
>
> [Trying to install alsa0.9etc with a SB Live!..]
> After days full of unresolved symbols, even with cvs, someone on the
> list suggested to search for 'rpm alsa rpm'. Found it, 'rpm --force'
> everything I could, and...
>
1 - 100 of 121 matches
Mail list logo
