Quick, somebody call in Dr. Phil.
--- [EMAIL PROTECTED] wrote:
>
> This afternoon/evening I was building and testing a
> 10.0 MHz WWV receiver to
> replace the dying Heathkit "Most Accurate Clock"
> receiver at my work. All was
> going well until the WWV signal faded out suddenly.
> I fooled
naw, it took them this long to find an excuse.
CW is dead and the digital modes are only used by a
very few. They can move just like we can.
John
N1fcu
--- Jim Wilhite <[EMAIL PROTECTED]> wrote:
> Sore losers aren't they. Want more digital and CW.
> I am
> surprised they waited this long.
>
I have the matching receiver to the BC-610 and it uses
a 12 volt DC (at least I think it is 12 volt it may be
24 volt but 12 trips it fine on the receiver) line to
switch a relay (to mute the receiver and such). The
control line is not easy to determine from the
schematic but it is there.
For
never, never use peanuts on radio packaging!.
newspaper and bubble wrap. foam is good too.
when a box is dammaged the peanuts fall out and there
goes your padding. the rest is down hill from there.
and newspaper absorbs water so I use that often.
--- Rick Brashear <[EMAIL PROTECTED]> wro
anyone got a 14 year old daughter/granddaughter (like
in the cell phone commercials) to
translate/communicate for us old timers?
That would keep the FCC monitors listening for sure.
[a lesson in 'burst' communications]
--- "Stevan A. White" <[EMAIL PROTECTED]> wrote:
> 200 Spoken WPM, huh? That
That rich old fart expires as we all do and his wife
sells all his "old crap" for next to nothing and the
meek inherite the rigs
:)
~John~ n1fcu
--- david knepper <[EMAIL PROTECTED]> wrote:
> "Rich old fart buys five old Corvettes and has them
> stored in his garage for
> his grandchildre
I wouldn't use wood for an insulator. Its insulation
properties change drastically depending on the
relative humidity. I have seen telephone poles light
up quite nicely with 10K volts on them.
PVC pipe (the white stuff) is a good insulator. To
test it, put it in a microwave for a couple of
m
If you want I can take a close up photo of mine and
Email it to you.
--- Rick Brashear <[EMAIL PROTECTED]> wrote:
> To all owners or those familiar with the BTA-1R
> series of transmitters:
>
> The "Power Raise/Lower" variable resistor (1R405) is
> connected to the
> motor unit which turns i
Great! What we need most are the schematics.
John N1FCU
--- [EMAIL PROTECTED] wrote:
> Hello John,
> My files show that I have a large manual for the
> AM-1000B.
> I will check when I go in Tuesday and bring it home.
>
> 73,
> Bill KB3DKS/1
>
> -Original Message-
>
> A friend of
A friend of mine had a Wilkinson AM1000B transmitter
but is lacking the schematic to put the iron back in
it. Someone else took it appart and now he can't
figure out how one of the transformers is wired. a
photograph of the iron would be invaluable. He would
like to mod it for 75 meters once we c
I have an rca bta-1r (just got it) and I wonder how
much drive you need for the circuit as you have it?
John (N1FCU)
--- "KC8OPP Roger S." <[EMAIL PROTECTED]> wrote:
> Rick,
>
> Here is what I did to bring the RCA to 160/80/40M.
>
> First thing is get a copy of the "Radio Handbook" by
> Willia
11 matches
Mail list logo