Re: [AMRadio] New QTH for Rochester (NY) hamfest

2009-01-24 Thread RJ Mattson
If only the AWA would get smart and link up with the Rochester Hamfest. The AWA needs indoor space and exposure for new members. What a hamfest that would be! Regards, bob...w2ami x wn2ami 1962 - Original Message - From: "VJB" Subject: [AMRadio] New QTH for Rochester (NY) hamfest http

Re: [AMRadio] ARRL classifieds kaput

2008-04-24 Thread RJ Mattson
, wa2cwa http://www.manualman.com On Thu, 24 Apr 2008 08:58:36 -0400 "RJ Mattson" <[EMAIL PROTECTED]> writes: > Charlie > Is there an ARRL e-mail address to voice a complaint to? > bob...w2ami x wn2ami 1962 > > - Original Message - > From: "

Re: [AMRadio] ARRL classifieds kaput

2008-04-24 Thread RJ Mattson
Charlie Is there an ARRL e-mail address to voice a complaint to? bob...w2ami x wn2ami 1962 - Original Message - From: "charles L." <[EMAIL PROTECTED]> To: Sent: Thursday, April 24, 2008 7:46 AM Subject: [AMRadio] ARRL classifieds kaput Maybe this is old news, but the ARRL is discont

[AMRadio] Don't blame the users Re: {ADMIN NOTICE TO SELLERS AND BUYERS ON THIS LIST}

2008-02-29 Thread RJ Mattson
I just hit reply. With all other reflectors the reply would goto the sender (rbethman @ comcast com) Why does this reflector goes to the AMradio group? THAT IS THE PROBLEM Don't blame the users. bob...w2ami - Original Message - From: "rbethman" <[EMAIL PROTECTED]> To: "Discussion of AM R

Speech Processing Re: [AMRadio] RE: MODULATION POWER REQUIRED

2008-02-15 Thread RJ Mattson
Bob Let me know what u decide on. I'm running qrp AM and need every ounce to be intelligence. I can't waste power to be hifi. Was your ckt similar to the Eico modulator clipper? I assume you will strictly use tooobes? :-) bob...w2ami x wn2ami 1962 - Original Message - From: "Bob Ma

Re: [AMRadio] Wanted: Ranger front panel

2008-02-04 Thread RJ Mattson
Hi Gary Are you still looking for a panel? If so, I'll send a photo of one I have in storage. If I remember, it is still attached to a stripped chassis. No cabinet. bob...w2ami < http://www.qrz.com/callsign/w2ami> - Original Message - From: "Gary Kohtala" <[EMAIL PROTECTED]> To: Sent: Sa

Re: AWA Re: [AMRadio] HAMFEST REMINDER --- THIS SUNDAY

2007-10-18 Thread RJ Mattson
me frame. And, don't forget, there is a big hamfest in Sellersville, PA this Sunday, 10/21. Weather forecast looks perfect. Pete, wa2cwa On Wed, 17 Oct 2007 22:55:36 -0400 "RJ Mattson" <[EMAIL PROTECTED]> writes: > When will it dawn on the AWA to team up with the Rochester, N

AWA Re: [AMRadio] HAMFEST REMINDER --- THIS SUNDAY

2007-10-17 Thread RJ Mattson
When will it dawn on the AWA to team up with the Rochester, NY hamfest? bob...w2ami - Original Message - From: <[EMAIL PROTECTED]> Subject: [AMRadio] HAMFEST REMINDER --- THIS SUNDAY Here is a reminder to all amateur radio operators of a free vintage hamfest to be held in Davidsonville,

Xfmr Talk Back Re: [AMRadio] WZ1M ?

2007-08-28 Thread RJ Mattson
Pass this on to Perry: He might be working with ham hearsay. I found that the talk back from my BC-610 xmtr was coming from the current overload relay resetable on the front panel. Once I bypassed the current relay with an oil cap the so called mod xfmr talk buzz stopped. There was an hints/kinks

[AMRadio] Viking Valiant II cabinet paint

2007-08-09 Thread RJ Mattson
The gray paint on the front of my Valiant II is peeling off. Is this common or just my luck? bob...w2ami x wn2ami 1962 __ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net

HV Cable Re: [AMRadio] (no subject)

2007-06-05 Thread RJ Mattson
I have used RG58 sucessfully. My 5kv megger shows no breakdown. bob...w2ami - Original Message - From: "Jan Erik Holm" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Monday, June 04, 2007 3:00 PM Subject: Re: [AMRadio] (no subject) For only 2 kV I just w

Re: [AMRadio] LPB tx

2007-05-24 Thread RJ Mattson
I have a LPB RC-6A Broadcast xmtr available/working for any reasonable offer. bob...w2ami x wn2ami 1962 - Original Message - >> BTW...anyone got an LPB they want to get rid of for cheap? __ AMRadio mailing list List Rule

[AMRadio] E-V Model 1000 Speech Clipper

2007-04-25 Thread RJ Mattson
Anyone have information on the E-V Model 1000 Speech Clipper ? bob...w2ami x wn2ami 1962 __ AMRadio mailing list List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Part

Globe 350 Re: [AMRadio] 4-65's

2007-04-05 Thread RJ Mattson
Hi Jim I am always looking for substitutes for my Champs AX9909's. The top of the list are two 5894's with the plates wired in parallel. I believe there was a article in ER with is conversion? How did you get the HV up to 1500v? Would an additional fil xmfr resolve cathode modulation or could a DC

Re: [AMRadio] Re: Source for HV ceramic caps online?

2007-03-14 Thread RJ Mattson
Tnx Jim - nice find. bob...w2ami - Original Message - From: "Jim candela" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" Sent: Wednesday, March 14, 2007 12:15 PM Subject: RE: [AMRadio] Re: Source for HV ceramic caps online? Here is another source I have used

Re: [AMRadio] Source for HV ceramic caps online?

2007-03-14 Thread RJ Mattson
There is a long running supplier of HV caps in Nuts and Volts magazine. Just recycled my issue yesterday :-( bob...w2ami x wn2ami 1962 - Original Message - From: "A.R.S. - W5AMI" <[EMAIL PROTECTED]> Subject: [AMRadio] Source for HV ceramic caps online? I need a plate bypass cap, .00

Re: [AMRadio] Coto Coil information

2006-12-18 Thread RJ Mattson
Hi Mark I have many of the Coto plug in coils. I'll check inside the boxes - maybe there is some advertising. Didn't realize they were a knob manufacturer. bob...w2ami - Original Message - From: "W1EOF" <[EMAIL PROTECTED]> Subject: [AMRadio] Coto Coil information Anyone have a Coto Coil

[AMRadio] 10m AM Calling frequencies?

2006-10-28 Thread RJ Mattson
The band is just too dead to monitor 10m with only my Gonset G28 :-( I have 5 memories to program on my htx-10 a 10m all mode xcvr. 29.0 is a known AM calling frequency. Any others? So far I have programmed 28.2 IARU cw beacons 28.4 ssb calling 29.0 am calling 29.6 fm calling Do I have them cor

Re: [AMRadio] FS: 12-pin Connectors

2006-09-20 Thread RJ Mattson
Is this the one for the Hallicrafters FPM-300 ? I just can't find the box my FPM-300 is stored in at the moment. I lost the cable when I moved. bob..w2ami - Original Message - From: "Brian Carling" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; ; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Se

Re: [AMRadio] 10M Openings after sunset

2006-08-05 Thread RJ Mattson
I wish I had your tenacity. I have a scanner that could be programmed to listen on 29 and 50.4 AM. Then scramble to the shack and fire up the Gonset G28 or Clegg 66r to reply. bob...w2ami - Original Message - From: <[EMAIL PROTECTED]> Subject: [AMRadio] 10M Openings after sunset Just

[AMRadio] Relayed from N4TGC was: GB> VTVM Battery Eliminator

2006-07-21 Thread RJ Mattson
Relayed from N4TGC Eric Don; It's so simple I could almost recall it from memory, but I pulled the schematic anyway ... there are a couple-three detriments, which I'll mention first: the circuit I use only works if the negative of the cell is grounded (which all Heaths, EICOs and Conars I've eve

Re: [AMRadio] Hammarlund Four-11 info needed

2006-07-04 Thread RJ Mattson
Hi Bill I'll send the Four11 schematic again. The spam eaters must have got it. I'm looking for a Hammarlund ED-4 xmtr schematic. bob...w2ami - Original Message - From: "w2dgb" <[EMAIL PROTECTED]> To: Sent: Monday, July 03, 2006 3:37 PM Subject: [AMRadio] Hammarlund Four-11 info needed

Re: [AMRadio] Hammarlund Four-11 info needed

2006-07-03 Thread RJ Mattson
Hi Bill Sent you the 4/11 schematic in another email. Let me know if it gets through the spam filters. bob...w2ami - Original Message - From: "w2dgb" <[EMAIL PROTECTED]> Subject: [AMRadio] Hammarlund Four-11 info needed Does anyone have a schematic/manual that they can scan and email to

Re: [AMRadio] FW: Request for HAM Radio Operator

2006-07-02 Thread RJ Mattson
Yes I sent it to spoof at paypal dot com They confirmed bogus. bob...w2ami - Original Message - From: "david knepper" <[EMAIL PROTECTED]> To: "Discussion of AM Radio" Sent: Sunday, July 02, 2006 1:24 PM Subject: Re: [AMRadio] FW: Request for HAM Radio Operator I am getting a message fr

[AMRadio] Polycom 62 was Dayton Stuff

2006-05-24 Thread RJ Mattson
Hi Charlie, We are some pair :-) Your not a collector and I'm not a dealer/seller. Did you ever own/operate a Polycom 62? I could only afford a Heath two'er back in the AM days. Tried Brian's AF4K boneyard price guide but get 404s at the moment. The wife is in your corner. bob...w2ami x wn2ami 19

Re: [AMRadio] Dayton Stuff

2006-05-24 Thread RJ Mattson
I have a Polycom 62 that I'll never get around to restore. Should clean up nice. Any offers? bob...w2ami - Original Message - From: "Peter Markavage" <[EMAIL PROTECTED]> Polycomm 62 sold. Pete

Hosstraders NH Re: [AMRadio] DAYTON FLEA MARKET

2006-04-19 Thread RJ Mattson
I haven't been to the Hosstraders NH flea market in over 10 years. Is it still as good as I remember? Thinking of making the trip this year. bob...w2ami - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Wednesday, April 19, 2006 6:53 AM Subject: Re: [AMRadio] DAYTON FLEA MARKET

Re: [AMRadio] 10 Meter AM Frequencies

2006-04-04 Thread RJ Mattson
I have a Comsat 35 for trade or sale. bob...w2ami - Original Message - From: <[EMAIL PROTECTED]> To: Sent: Tuesday, April 04, 2006 8:42 PM Subject: Re: [AMRadio] 10 Meter AM Frequencies Rick/K5IZ wrote: >Has anyone made this modification to an old Lafayette Comstat 25? I >have a coup

Re: [AMRadio] WANTED: 12VDC syncronous vibrator

2006-02-22 Thread RJ Mattson
Hi Charlie I looked through my 1949 Radio Master catalog and could not find any G1803 vibrator. Must be a later part number. In 1949 most battery was 6 volts. I have a complete Mallory VP-552 synchronous power supply with a Mallory 725 synchronous vibrator installed. Would this be any value to

K1JCL 6m AM Repeater - was [AMRadio] Modulator iron & ideas needed

2006-01-10 Thread RJ Mattson
Todd, Thanks for the information. No wonder I can't hear the repeater :-) I copied ER Magazine where it is listed under Vintage Nets. bob...w2ami - Original Message - From: "Todd, KA1KAQ" <[EMAIL PROTECTED]> To: "Discussion of AM Radio" On 1/8/0

Re: [AMRadio] Modulator iron & ideas needed

2006-01-08 Thread RJ Mattson
Hi Mark, Are you in range of the K1JCL 6m 50.4 AM repeater in CT? I tried 50.4 here from the Catskills but never heard anything with my 6m Clegg. I have a 6m WRL Comet 7C-6A Techceiver you can try to check for local activity before you expend to much time and money. 73 bob...w2ami x wn2ami 1

[AMRadio] Re: Power Resistor Needed

2006-01-07 Thread RJ Mattson
Bob AB3L I wrote down the information to check (80K power resistor) but lost the post. I have a 75K Ohmite No.0924 It measures 10.5 X 1.25 inches. Send me your address if you need it. bob...w2ami

Re: [AMRadio] Drive Pot

2006-01-01 Thread RJ Mattson
I have a nos 50k ww 10w pot. bob...w2ami - Original Message - From: "Jim Wilhite" <[EMAIL PROTECTED]> To: "Discussion of AM Radio" Sent: Sunday, January 01, 2006 11:28 AM Subject: Re: [AMRadio] Drive Pot Thanks for the tip Ronnie, but I didn't find what I need. SSN has plenty of 25

Re: [AMRadio] Free Ad

2005-12-28 Thread RJ Mattson
For Sale: 148C-1 NBFM Adapter. $200. Bob [EMAIL PROTECTED] - Original Message - From: "david knepper" <[EMAIL PROTECTED]> To: "Collins Mail List" <[EMAIL PROTECTED]> Cc: Sent: Monday, December 26, 2005 7:50 AM Subject: [AMRadio] Free Ad The new issue (November/December) of the Col

Re: [AMRadio] My Novice QSL

2005-03-09 Thread RJ Mattson
There should be a novice card registry? Sure would like to find one of the hundreds I mailed out at 3 to 5 cents each. bob...w2ami x wn2ami 1962 - Original Message - From: "DAVID AABYE" <[EMAIL PROTECTED]> To: Sent: Wednesday, March 09, 2005 5:04 AM Subject: [AMRadio] My Novice QS

[AMRadio] James Knights Co., FS-344 Frequency Standard

2005-02-26 Thread RJ Mattson
Anyone have a schematic for a James Knights FS-344 Frequency Standard? bob...w2ami http://www.qrz.com/callsign/w2ami

Re: [AMRadio] Meter Needed

2005-02-12 Thread RJ Mattson
Hi Bob Thanks for the reply. The 0-30ma range is fine. Does the meter look exactly the same as in my photo and 2-3/4" round? Photo: http://www.hvinet.com/rjmattson/meters 73 bob...w2ami www.qrz.com/callsign/w2ami - Original Message - From: <[EMAIL PROTECTED]> Subject: Re: [AMRadio] Mete

[AMRadio] Meter Needed

2005-02-11 Thread RJ Mattson
I am restoring a Hammarlund xmtr and need the following panel meter: Picture: http://www.hvinet.com/rjmattson/meters Any help would be appreciated. bob...w2ami www.qrz.com/callsign/w2ami

Re: [AMRadio] Low Power AM nets

2005-01-03 Thread RJ Mattson
Al, Don't tell anyone you are using low power and you will get good reports. The difference between a DX-40 and a KW is maybe at most 3 S-units on your rcvr. bob...w2ami - Original Message - From: "Schichler, Alfred" <[EMAIL PROTECTED]> To: Sent: Monday, January 03, 2005 9:59 AM Subj

Re: [AMRadio] 10 meter AM

2004-11-03 Thread RJ Mattson
Monitor/call cq on 29000 khz and then move higher to qso. bob...w2ami www.qrz.com/callsign/w2ami - Original Message - From: "Mark Cobbeldick" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 03, 2004 9:15 AM Subject: [AMRadio] 10 meter AM I am active on 10 meters (FM & SSB) for so

Re: [AMRadio] trade?

2004-10-14 Thread RJ Mattson
Ronnie I have all three Where are u located? bob...w2ami - Original Message - From: "ronnie.hull" <[EMAIL PROTECTED]> To: Sent: Thursday, October 14, 2004 7:06 PM Subject: [AMRadio] trade? > > Gentleman > > Im in the market for a NC183D, a HRO50T or T1, or a good R4C > > I have several

Re: [AMRadio] WTB SB-220

2004-09-27 Thread RJ Mattson
t up the best ant... > Then crank-it with juice!!! > George AB2KC > 1KW 4X1 lives > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of RJ Mattson > Sent: Monday, September 27, 2004 9:27 AM > To: Discussion of AM Radio > Subject

Re: [AMRadio] WTB SB-220

2004-09-27 Thread RJ Mattson
whereas a 500 watt rig (that 6db again) > was often armchair copy, and sometimes often drive the > QRM away. > > Regards, > Jim > > RJ Mattson <[EMAIL PROTECTED]> wrote: > If you can't get out consistantly with a Viking II, > you need an antenna - > not an amp. > bob...w2ami > www.qrz.com/callsign/w2ami

Re: [AMRadio] WTB SB-220

2004-09-26 Thread RJ Mattson
If you can't get out consistantly with a Viking II, you need an antenna - not an amp. bob...w2ami www.qrz.com/callsign/w2ami - Original Message - From: "Gary Blau" <[EMAIL PROTECTED]> To: "Discussion of AM Radio" Sent: Sunday, September 26, 2004 9:22 PM Subject: Re: [AMRadio] WTB SB-220

Re: [AMRadio] WTB SB-220

2004-09-26 Thread RJ Mattson
If your Viking II runs 100 watts, 400 watts will give you about 1 s-unit gain. Not even detectable unless you look at the meter. Could be helpful during the winter months as a supplemental room heater. bob...w2ami - Original Message - From: "Cory Hine" <[EMAIL PROTECTED]> To: Sent: Sund

Re: [AMRadio] Need Schematic for Patterson PR-10

2004-08-01 Thread RJ Mattson
Mark Sorry - no schematic for PR-10. Is your s-meter ok? The Breting 12 has two meters. One of the meters on my Breting 12 has been replaced with a Patterson PR-10 s-meter. I don't think this is a Breting recomended replacement part :-). I would like to find the correct (left) meter for my Bretin

Re: [AMRadio] RG 6

2004-07-19 Thread RJ Mattson
Solid polyethlene RG-6/U 2700v rms RG-8/U 4300v rms per 73 coax handbook circa 1968 bob...w2ami - Original Message - From: "Jim Wilhite" <[EMAIL PROTECTED]> To: Sent: Saturday, July 17, 2004 6:14 PM Subject: [AMRadio] RG 6 > Does anyone have the voltage specification on RG6 coax

[AMRadio] Plate modulating a 807

2004-04-08 Thread RJ Mattson
Sorry Here is a marked up transmitter drawing showing the values in question: http://www.hvinet.com/rjmattson/four20schematic_mu bob...w2ami

Re: [AMRadio] Plate modulating a 807

2004-04-08 Thread RJ Mattson
I agree, the 100ma meter should be across the shunt R20 (27ohm). I will check if that is a drafting error. Here is a marked up transmitter drawing showing the values in question: http://www.hvinet.com/rjmattson/four20schematic+ R24 screen is 15 K Screen voltage is 200V R24 node is 270V C24 scree

[AMRadio] Plate modulating a 807

2004-04-06 Thread RJ Mattson
This url is to my Hammarlund Four20 AM transmitter schematic. http://www.hvinet.com/rjmattson/four20schematic The PA 807 screen does not seem to be modulated through a dropping resistor or self modulated with a choke. The Hammarlund Four11 plate modulator is connected in place of jumper MOD on the

Re: [AMRadio] Globe King tank coils

2004-02-25 Thread RJ Mattson
Tnx Tony Now I have a good idea where to start. 73 bob...w2ami www.qrz.com/callsign/w2ami - Original Message - From: "Anthony W. DePrato" <[EMAIL PROTECTED]> To: Sent: Wednesday, February 25, 2004 1:21 PM Subject: RE: [AMRadio] Globe King tank coils > > >i checked out my champ 350 th

Re: [AMRadio] Globe King tank coils

2004-02-24 Thread RJ Mattson
ose wound with varnished > wire, but I don't know how many turns for 80 meters. Then part of the 160 > meter coil is on another form below the chassis. > > Since I am not familiar with the Champion series, I don't know if that > applies to it. If you want the picture,

Re: [AMRadio] Globe King tank coils

2004-02-23 Thread RJ Mattson
Are the "Globe Champion 300" tank coils the same as the GK500? I bought my Champion off of a CB'er who modified it for 11 meters and removed and discarded the tapped tank coils. If they are the same, I can replicate the coils. Help! bob...w2ami www.qrz.com/callsign/w2ami - Original Message --

Re: [AMRadio] Free: Lettine 262 Brochure & RS-6 Clip Leads

2004-01-20 Thread RJ Mattson
I have a Lettine 262 bob...w2ami - Original Message - From: "Merz Donald S" <[EMAIL PROTECTED]> To: ; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; "'Glowbugs (E-mail)" <[EMAIL PROTECTED]>; "'Baswaplist' (E-mail)" <[EMAIL PROTECTED]> Sent: Tuesday, January 20, 2004 12:19 PM Subject: [AMRadio]

Re: [AMRadio] Meter Repair

2004-01-12 Thread RJ Mattson
Hi Tony My 51S1 rcvr s-meter had a broken spring. I thought it was a goner. Sent it to Eldad, K2AB. [EMAIL PROTECTED] Fast and reasonable. Also does tube equipment repair. bob...w2ami - Original Message - From: "RoadKing" <[EMAIL PROTECTED]> To: Sent: Monday, January 12, 2004 12:48 PM Su

Re: [AMRadio] RE: r390a, sx17, t4xb for sale

2004-01-12 Thread RJ Mattson
Hi Brett I could pick up the r390a, I am 70m north of NYC bob...w2ami Highland NY 12528 - Original Message - From: "Brett Gazdzinski" <[EMAIL PROTECTED]> To: Sent: Monday, January 12, 2004 8:35 AM Subject: [AMRadio] RE: r390a, sx17, t4xb for sale > Hello all AMers. > I am cleaning out

[AMRadio] WTB Oval 6 x 9 Speaker

2004-01-09 Thread RJ Mattson
Hi Need an AM oval speaker to fit a 5-3/4" by 8-1/2" opening. No ssb speakers will be considered :-) bob...w2ami

Re: [AMRadio] Looking for Linear Amp

2003-12-20 Thread RJ Mattson
Paul, I believe, increasing your power from a 45 watt Ranger to 180 watts, is just one "S" unit on most receivers. Put your money into a good antenna. bob...w2ami - Original Message - From: "Paul Sokoloff" <[EMAIL PROTECTED]> To: Sent: Friday, December 19, 2003 10:30 PM Subject: Re: [AMR

Re: [AMRadio] AM from a ricebox

2003-12-11 Thread RJ Mattson
I can't understand the fascination of hooking a rice box to a linear amp for AM? I find a qso with this setup boring. Give me an op with a DX-100 or equivalent and the conversation is interesting and exhilarating. 73, bob...w2ami http://www.qrz.com/callsign/w2ami